- 18 May, 2020 5 commits
-
-
Bernard Zhao authored
Maybe keep pointer which points to global const string data in const type is better, make sure not change const data. Signed-off-by:
Bernard Zhao <bernard@vivo.com> Signed-off-by:
Inki Dae <inki.dae@samsung.com>
-
Marek Szyprowski authored
Internal pages array and scatter-list for them is not really needed for anything. FBDev emulation can simply rely on the DMA-mapping framework to create a proper kernel mapping for the buffer, while all other buffer use cases don't really need that array at all. Suggested-by:
Christian König <christian.koenig@amd.com> Signed-off-by:
Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by:
-
Marek Szyprowski authored
Explicitly check if the imported buffer has been mapped as contiguous in the DMA address space, what is required by all Exynos DRM CRTC drivers. While touching this, set buffer flags depending on the availability of the IOMMU. Signed-off-by:
-
Marek Szyprowski authored
The ExynosDRM page fault handler is never used, drm_gem_mmap() always calls exynos_drm_gem_mmap() function, which perform complete mapping for the given virtual address-space area. Signed-off-by:
-
Markus Elfring authored
The function “platform_get_irq” can log an error already. Thus omit redundant messages for the exception handling in the calling functions. This issue was detected by using the Coccinelle software. Signed-off-by:
Markus Elfring <elfring@users.sourceforge.net> Signed-off-by:
-
- 15 May, 2020 1 commit
-
-
git://anongit.freedesktop.org/drm/drm-miscDave Airlie authored
drm-misc-next for 5.8: UAPI Changes: Cross-subsystem Changes: * dma-buf: use atomic64_fetch_add() for context id * Documentation: document bindings for ASUS ZOOT TM5P5, BOE NV133FHM-N62, hpd-gpios Core Changes: Driver Changes: * drm/ast: fix supend; cleanups * drm/i2c: cleanups * drm/panel: add MODULE_LICENSE to panel-visinox-rm69299; add support for ASUS TM5P5i, BOE NV133FHM-N62i; fix size and bpp of BOE NV133FHM-N61 add hpd-gpio to panel-simple * drm/mcde: fix return value check in mcde_dsi_bind() * drm/mgag200: use managed drmm_mode_config_init(); cleanups * fbdev/pxa168fb: cleanups Signed-off-by:Dave Airlie <airlied@redhat.com> From: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20200514070819.GA6930@linux-uq9g
-
- 14 May, 2020 3 commits
-
-
git://linuxtv.org/pinchartl/mediaDave Airlie authored
R-Car Display Unit & related changes: - DT bindings conversion to YAML - Planes zpos sanity check and fix - MAINTAINERS entry for LVDS panel driver Signed-off-by:
-
git://people.freedesktop.org/~agd5f/linuxDave Airlie authored
amd-drm-next-5.8-2020-05-12: amdgpu: - Misc cleanups - RAS fixes - Expose FP16 for modesetting - DP 1.4 compliance test fixes - Clockgating fixes - MAINTAINERS update - Soft recovery for gfx10 - Runtime PM cleanups - PSP code cleanups amdkfd: - Track GPU memory utilization per process - Report PCI domain in topology Signed-off-by:
-
git://anongit.freedesktop.org/drm/drm-intelDave Airlie authored
Driver Changes: - Fix GitLab #1698: Performance regression with Linux 5.7-rc1 on Iris Plus 655 and 4K screen (Chris) - Add Wa_14011059788 for Tigerlake (Matt A) - Add per ctx batchbuffer wa for timestamp for Gen12 (Mika) - Use indirect ctx bb to load cmd buffer control value from context image to avoid corruption (Mika) - Enable DP Display Audio WA (Uma, Jani) - Update forcewake firmware ranges for Icelake (Radhakrishna) - Add missing deinitialization cases of load failure for display (Jose) - Implement TC cold sequences for Icelake and Tigerlake (Jose) - Unbreak enable_dpcd_backlight modparam (Lyude) - Move the late flush_submission in retire to the end (Chris) - Demote "Reducing compressed framebufer size" message to info (Peter) - Push MST link retraining to the hotplug work (Ville) - Hold obj->vma.lock over for_each_ggtt_vma() (Chris) - Fix timeout handling during TypeC AUX power well enabling for ICL (Imre) - Fix skl+ non-scaled pfit modes (Ville) - Prefer soft-rc6 over RPS DOWN_TIMEOUT (Chris) - Sanitize GT first before poisoning HWSP (Chris) - Fix up clock RPS frequency readout (Chris) - Avoid reusing the same logical CCID (Chris) - Avoid dereferencing a dead context (Chris) - Always enable busy-stats for execlists (Chris) - Apply the aggressive downclocking to parking (Chris) - Restore aggressive post-boost downclocking (Chris) - Scrub execlists state on resume (Chris) - Add debugfs attributes for LPSP (Ansuman) - Improvements to kernel selftests (Chris, Mika) - Add tiled blits selftest (Zbigniew) - Fix error handling in __live_lrc_indirect_ctx_bb() (Dan) - Add pre/post plane updates for SAGV (Stanislav) - Add ICL PG3 PW ID for EHL (Anshuman) - Fix Sphinx build duplicate label warning (Jani) - Error log non-zero audio power refcount after unbind (Jani) - Remove object_is_locked assertion from unpin_from_display_plane (Chris) - Use single set of AUX powerwell ops for gen11+ (Matt R) - Prefer drm_WARN_ON over WARN_ON (Pankaj) - Poison residual state [HWSP] across resume (Chris, Tvrtko) - Convert request-before-CS assertion to debug (Chris) - Carefully order virtual_submission_tasklet (Chris) - Check carefully for an idle engine in wait-for-idle (Chris) - Only close vma we open (Chris) - Trace RPS events (Chris) - Use the RPM config register to determine clk frequencies (Chris) - Drop rq->ring->vma peeking from error capture (Chris) - Check preempt-timeout target before submit_ports (Chris) - Check HWSP cacheline is valid before acquiring (Chris) - Use proper fault mask in interrupt postinstall too (Matt R) - Keep a no-frills swappable copy of the default context state (Chris) - Add atomic helpers for bandwidth (Stanislav) - Refactor setting dma info to a common helper from device info (Michael) - Refactor DDI transcoder code for clairty (Ville) - Extend PG3 power well ID to ICL (Anshuman) - Refactor PFIT code for readability and future extensibility (Ville) - Clarify code split between intel_ddi.c and intel_dp.c (Ville) - Move out code to return the digital_port of the aux ch (Jose) - Move rps.enabled/active and use of RPS interrupts to flags (Chris) - Remove superfluous inlines and dead code (Jani) - Re-disable -Wframe-address from top-level Makefile (Nick) - Static checker and spelling fixes (Colin, Nathan) - Split long lines (Ville) Signed-off-by:
-
- 13 May, 2020 8 commits
-
-
Tomohito Esaki authored
According to drm_plane_create_zpos_property() function documentation, all planes zpos range should be set if zpos property is supported. However, the rcar-du driver didn't set primary plane zpos range. Since the primary plane's zpos is fixed, set it immutably. Reported-by:
Yoshihito Ogawa <yoshihito.ogawa.kc@renesas.com> Reported-by:
Koji Matsuoka <koji.matsuoka.xm@renesas.com> Signed-off-by:
Tomohito Esaki <etom@igel.co.jp> Reviewed-by:
Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Reviewed-by:
Daniel Stone <daniels@collabora.com> [Turn continue into if ... else ...] Signed-off-by:
-
Laurent Pinchart authored
The zpos property is used by userspace to sort the order of planes. While the property is not mandatory for drivers to implement, mixing planes with and without zpos confuses userspace, and shall not be allowed. Clarify this in the documentation and warn at runtime if the drivers mixes planes with and without zpos properties. Signed-off-by:
Sam Ravnborg <sam@ravnborg.org> Reviewed-by:
Daniel Vetter <daniel.vetter@ffwll.ch>
-
Laurent Pinchart authored
As the DRM LVDS panel driver uses a different approach to DT bindings compared to what Thierry Reding advocates, add a specific MAINTAINERS entry to avoid bothering Thierry with requests related to that driver. Signed-off-by:
-
Geert Uytterhoeven authored
Document the optional properties for describing module resets, to support resetting display channels on R-Car Gen2 and Gen3. Signed-off-by:
Geert Uytterhoeven <geert+renesas@glider.be> Acked-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by:
Rob Herring <robh@kernel.org> Reviewed-by:
Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Signed-off-by:
-
Laurent Pinchart authored
Convert the Thine THC63LVD1024 text binding to YAML. Signed-off-by:
Maxime Ripard <mripard@kernel.org> Reviewed-by:
Jacopo Mondi <jacopo+renesas@jmondi.org> Reviewed-by:
-
Laurent Pinchart authored
The simple-bridge driver supports multiple simple or dumb bridges, covered by different compatible strings but otherwise identical DT bindings. Some of those bridges have undocumented bindings, while others are documented in text form in separate files. Group them all in a single binding and convert it to YAML. The psave-gpios property of the adi,adv7123 is dropped, as it isn't supported by the driver and isn't specified in any DT file upstream. Support for power saving is available through the enable-gpios property that should cover all the needs of the ADV7123 (as the device only has a /PSAVE pin and no enable pin). Signed-off-by:
-
Laurent Pinchart authored
Document the #address-cells and #size-cells properties of the ports node in the schemas of the bridge DT bindings, and set additionalProperties to false to reject additional properties. Signed-off-by:
-
Chris Wilson authored
Now that atomic64_fetch_add() exists we can use it to return the base context id, rather than the atomic64_add_return(N) - N concoction. Suggested-by:
Mika Kuoppala <mika.kuoppala@linux.intel.com> Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Reviewed-by:
Maciej Patelczyk <maciej.patelczyk@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200513074809.18194-2-chris@chris-wilson.co.uk
-
- 12 May, 2020 1 commit
-
-
Wei Yongjun authored
The of_drm_find_bridge() function returns NULL on error, it doesn't return error pointers so this check doesn't work. Fixes: 5fc537bf ("drm/mcde: Add new driver for ST-Ericsson MCDE") Signed-off-by:
Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200430073145.52321-1-weiyongjun1@huawei.com
-
- 11 May, 2020 11 commits
-
-
Jason Yan authored
Fix the following gcc warning: drivers/gpu/drm/amd/amdgpu/gmc_v6_0.c:65:18: warning: ‘crtc_offsets’ defined but not used [-Wunused-const-variable=] static const u32 crtc_offsets[6] = ^~~~~~~~~~~~ Reported-by:Hulk Robot <hulkci@huawei.com> Signed-off-by:
Jason Yan <yanaijie@huawei.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com>
-
Leo (Hanghong) Ma authored
[Why] For MST case: when update_config is called to disable a stream, this clears the settings for all the streams on that link. We should only clear the settings for the stream that was disabled. [How] Clear the settings after the call to remove display is called. Reviewed-by:
Harry Wentland <harry.wentland@amd.com> Reviewed-by:
Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by:
Leo (Hanghong) Ma <hanghong.ma@amd.com> Signed-off-by:
-
Tom St Denis authored
Requested bits for UMR support Signed-off-by:
Tom St Denis <tom.stdenis@amd.com> Reviewed-by:
-
Tom St Denis authored
On my raven1 system (rev c6) with VBIOS 113-RAVEN-114 GFXOFF is not stable (resulting in large block tiling noise in some applications). Disabling GFXOFF via the quirk list fixes the problems for me. Signed-off-by:
-
Jane Jian authored
since for sriov, baco happens on host side, no need and meaning to judge is baco. also, since kiq reads strap0 in here, if kiq is not ready or gpu reset(kiq resume) happens after this read, would fail to read and wrongly set baco as true(1). Acked-by:
Evan Quan <evan.quan@amd.com> Signed-off-by:
Jane Jian <Jane.Jian@amd.com> Signed-off-by:
-
Thomas Zimmermann authored
Storing the connector instance in struct mga_device avoids some dynamic memory allocation. On errors, the connector's initializer function now destroys the i2c structure. Done in preparation of converting mgag200 to simple-KMS helpers. v2: * improved commit message (Michael) * fixed error message for mgag200_vga_connector_init() (Sam) Signed-off-by:
Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by:
Michael J. Ruhl <michael.j.ruhl@intel.com> Acked-by:
John Donnelly <John.p.donnelly@oracle.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200507090315.21274-7-tzimmermann@suse.de
-
Thomas Zimmermann authored
The fields mode_info, num_crtcs and mode in struct mga_device serve no purpose. Remove them. Signed-off-by:
-
Thomas Zimmermann authored
Mode configuration is now cleanued up automatically. While at it, move all mode-config code into mgag200_mode.c. Done in preparation of switching mgag200 to simple-KMS helpers. v2: * improve commit message (Sam) * rebased during cherry pick * also move bpp_shift initialization Signed-off-by:
-
Thomas Zimmermann authored
Done to simplify initialization code before embedding the DRM device instance in struct mga_device. Signed-off-by:
-
Thomas Zimmermann authored
Done in preparation of embedding the DRM device in struct mga_device. This patch makes the patch for embedding more readable. v2: * improved commit message (Daniel) Signed-off-by:
-
Thomas Zimmermann authored
Mgag200 uses dev_private to look up struct mga_device for instances of struct drm_device. Use of dev_private is deprecated, so hide it in the helper function to_mga_device(). v2: * make to_mga_device() a function (Sam) Signed-off-by:
-
- 09 May, 2020 7 commits
-
-
Jason Yan authored
No other functions use the return value of pxa168fb_init_mode() and the return value is always 0 now. Make it return void. This fixes the following coccicheck warning: drivers/video/fbdev/pxa168fb.c:565:5-8: Unneeded variable: "ret". Return "0" on line 597 Signed-off-by:
-
Samuel Zou authored
Fix the following sparse warning: drivers/gpu/drm/i2c/tda998x_drv.c:1136:5: warning: symbol 'tda998x_audio_digital_mute' was not declared. Should it be static? Reported-by:
Samuel Zou <zou_wei@huawei.com> Cc: Russell King <linux@armlinux.org.uk> Signed-off-by:
-
Douglas Anderson authored
People use panel-simple when they have panels that are builtin to their device. In these cases the HPD (Hot Plug Detect) signal isn't really used for hotplugging devices but instead is used for power sequencing. Panel timing diagrams (especially for eDP panels) usually have the HPD signal in them and it acts as an indicator that the panel is ready for us to talk to it. Sometimes the HPD signal is hooked up to a normal GPIO on a system. In this case we need to poll it in the correct place to know that the panel is ready for us. In some system designs the right place for this is panel-simple. When adding this support, we'll account for the case that there might be a circular dependency between panel-simple and the provider of the GPIO. The case this was designed for was for the "ti-sn65dsi86" bridge chip. If HPD is hooked up to one of the GPIOs provided by the bridge chip then in our probe function we'll always get back -EPROBE_DEFER. Let's handle this by allowing this GPIO to show up late if we saw -EPROBE_DEFER during probe. NOTE: since the gpio_get_optional() is used, if the "hpd-gpios" isn't there our variable will just be NULL and we won't do anything in prepare(). Signed-off-by:
Douglas Anderson <dianders@chromium.org> Reviewed-by:
Stephen Boyd <swboyd@chromium.org> Reviewed-by:
-
Douglas Anderson authored
In the cases where there is no connector in a system there's no great place to put "hpd-gpios". As per discussion [1] the best place to put it is in the panel. Add this to the device tree bindings. [1] https://lore.kernel.org/r/20200417180819.GE5861@pendragon.ideasonboard.comSigned-off-by:
-
Douglas Anderson authored
All info I could find about this panel show that it behaves the same as the BOE NV133FHM-N61. However, it definitely appears to be a unique panel because reading the EDID shows "NV133FHM-N62". We'll add a string match for the new panel but until we find something unique about it we'll just point at the N61's structures. Signed-off-by:
-
Douglas Anderson authored
This panel appears to be the same or nearly the same as the BOE NV133FHM-N61, but since (in the very least) it identifies itself as a different model in the EDID we should add a new compatible string for it. Signed-off-by:
-
Douglas Anderson authored
The BOE NV133FHM-N61 is documented in the original commit to be a 13.3" panel, but the size listed in our struct doesn't match. Specifically: math.sqrt(30.0 * 30.0 + 18.7 * 18.7) / 2.54 ==> 13.92 Searching around on the Internet shows that the size that was in the structure was the "Outline Size", not the "Display Area". Let's fix it. Also the Internet says that this panel supports 262K colors. That's 6bpp, not 8bpp. Fixes: b0c664cc ("panel: simple: Add BOE NV133FHM-N61") Signed-off-by:
-
- 08 May, 2020 4 commits
-
-
Alex Deucher authored
We only need to set DPM_FLAG_NEVER_SKIP for the legacy ATPX BOCO case. D3cold and BACO work as expected. Acked-by:
-
Alex Deucher authored
The core handles this for us. Acked-by:
-
Alex Deucher authored
We should be checking whether the driver enabled runtime pm rather than whether the asic supports BOCO or BACO. That said in general they are equivalent unless the user has disabled runpm or it has been disabled for a specific asic. Reviewed-by:
-
Alex Deucher authored
The pci core handles this for us in pci_pm_init. Acked-by:
-
