- 03 Oct, 2017 1 commit
-
-
Arjun Vynipadath authored
We have lost a comment for minimum mtu value set for netdevice with 'commit d894be57 ("ethernet: use net core MTU range checking in more drivers"). Updating it accordingly. Signed-off-by:
Arjun Vynipadath <arjun@chelsio.com> Signed-off-by:
Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
- 02 Oct, 2017 39 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queueDavid S. Miller authored
Jeff Kirsher says: ==================== 40GbE Intel Wired LAN Driver Updates 2017-10-02 This series contains updates to i40e and i40evf. Shannon Nelson fixes an issue where when a machine has more CPUs than queue pairs, the counting gets a "little funky" and turns off Flow Director. So to correct it, limit the number of LAN queues initially allocated to be sure there are some left for Flow Director and other features. Lihong cleans up dead code by removing a condition check which cannot ever be true. Christophe Jaillet fixes a potential NULL pointer dereference, which could happen if kzalloc() fails. Filip corrects the reporting of supported link modes, which was incorrect for some NICs. Added support for 'ethtool -m' command, which displays information about QSFP+ modules. Mariusz adds functions to read/write the LED registers to control the LEDS, instead of accessing the registers directly whenever the LEDs need to be controlled. Jake fixes a regression where we introduced a scheduling while atomic, so introduce a separate helper function which will manage its own need for the mac_filter_hash_lock. Also cleaned up the "PF" parameter in i40e_vc_disable_vf() since it is never used and is not needed. Fixed a rare case where it is possible that a reset does not occur when i40e_vc_disable_vf() is called, so modify i40e_reset_vf() to return a bool to indicate whether it reset or not so that i40e_vc_disable_vf() can wait until a reset actually occurs. Alan adds the ability for the VF to request more or less underlying allocated queues from the PF. Fixes the incorrect method for clearing the vf_states variable with a NULL assignment, when we should be using atomic bitops since we don't actually want to clear all the flags. Fixed a resource leak, where the PF driver fails to inform clients of a VF reset because we were incorrectly checking the I40E_VF_STATE_PRE_ENABLE bit. Mitch converts i40evf_map_rings_to_vectors() to a void function since it cannot fail and allows us to clean up the checks for the function return value. Scott enables the driver(s) to pass traffic with VLAN tags using the 802.1ad Ethernet protocol. ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Scott Peterson authored
Enable i40e to pass traffic with VLAN tags using the 802.1ad ethernet protocol ID (0x88a8). This requires NIC firmware providing version 1.7 of the API. With older NIC firmware 802.1ad tagged packets will continue to be dropped. No VLAN offloads nor RSS are supported for 802.1ad VLANs. Signed-off-by:
Scott Peterson <scott.d.peterson@intel.com> Tested-by:
Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Alan Brady authored
Currently there is a bug in which the PF driver fails to inform clients of a VF reset which then causes clients to leak resources. The bug exists because we were incorrectly checking the I40E_VF_STATE_PRE_ENABLE bit. When a VF is first init we go through a reset to initialize variables and allocate resources but we don't want to inform clients of this first reset since the client isn't fully enabled yet so we set a state bit signifying we're in a "pre-enabled" client state. During the first reset we should be clearing the bit, allowing all following resets to notify the client of the reset when the bit is not set. This patch fixes the issue by negating the 'test_and_clear_bit' check to accurately reflect the behavior we want. Signed-off-by:
Alan Brady <alan.brady@intel.com> Tested-by:
Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Alan Brady authored
Currently we inappropriately clear the vf_states variable with a null assignment. This is problematic because we should be using atomic bitops on this variable and we don't actually want to clear all the flags. We should just clear the ones we know we want to clear. Additionally remove the I40E_VF_STATE_FCOEENA bit because it is no longer being used. Signed-off-by:
Alan Brady <alan.brady@intel.com> Tested-by:
Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Mitch Williams authored
This function cannot fail, so why is it returning a value? And why are we checking it? Why shouldn't we just make it void? Why is this commit message made up of only questions? Signed-off-by:
Mitch Williams <mitch.a.williams@intel.com> Tested-by:
Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Alan Brady authored
Currently the VF gets a default number of allocated queues from HW on init and it could choose to enable or disable those allocated queues. This makes it such that the VF can request more or less underlying allocated queues from the PF. First the VF negotiates the number of queues it wants that can be supported by the PF and if successful asks for a reset. During reset the PF will reallocate the HW queues for the VF and will then remap the new queues. Signed-off-by:
Alan Brady <alan.brady@intel.com> Tested-by:
Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Jacob Keller authored
It is possible although rare that we may not reset when i40e_vc_disable_vf() is called. This can lead to some weird circumstances with some values not being properly set. Modify i40e_reset_vf() to return a code indicating whether it reset or not. Now, i40e_vc_disable_vf() can wait until a reset actually occurs. If it fails to free up within a reasonable time frame we'll display a warning message. Signed-off-by:
Jacob Keller <jacob.e.keller@intel.com> Tested-by:
Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Jacob Keller authored
Replace i40e_vc_notify_vf_reset and i40e_reset_vf with a call to i40e_vc_disable_vf which does this exact thing. This matches similar code patterns throughout the driver. Signed-off-by:
Jacob Keller <jacob.e.keller@intel.com> Tested-by:
Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Jacob Keller authored
It's never used, and the vf structure could get back to the PF if necessary. Lets just drop the extra unneeded parameter. Signed-off-by:
Jacob Keller <jacob.e.keller@intel.com> Tested-by:
Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Jacob Keller authored
When we refactored handling of the PVID in commit 9af52f60 ("i40e: use (add|rm)_vlan_all_mac helper functions when changing PVID") we introduced a scheduling while atomic regression. This occurred because we now held the spinlock across a call to i40e_reset_vf(), which results in a usleep_range() call that triggers a scheduling while atomic bug. This was rare as it only occurred if the user configured a VLAN on a VF and also attempted to reconfigure the VF from the host system with a port VLAN. We do need to hold the lock while calling i40e_is_vsi_in_vlan(), but we should not be holding it while we reset the VF. We'll fix this by introducing a separate helper function i40e_vsi_has_vlans which checks whether we have a PVID and whether the VSI has configured VLANs. This helper function will manage its own need for the mac_filter_hash_lock. Then, we can move the acquiring of the spinlock until after we reset the VF, which ensures that we do not sleep while holding the lock. Using a separate function like this makes the code more clear and is easier to read than attempting to release and re-acquire the spinlock when we reset the VF. Signed-off-by:
Jacob Keller <jacob.e.keller@intel.com> Tested-by:
Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Mariusz Stachura authored
Instead of accessing register directly, use newly added AQC in order to blink LEDs. Introduce and utilize a new flag to prevent excessive API version checking. Signed-off-by:
Mariusz Stachura <mariusz.stachura@intel.com> Tested-by:
Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Filip Sadowski authored
This patch adds support for 'ethtool -m' command which displays information about (Q)SFP+ module plugged into NIC's cage. Signed-off-by:
Filip Sadowski <filip.sadowski@intel.com> Tested-by:
Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Filip Sadowski authored
This patch fixes incorrect reporting of supported link modes on some NICs. Signed-off-by:
Filip Sadowski <filip.sadowski@intel.com> Tested-by:
Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Christophe JAILLET authored
If 'kzalloc()' fails, a NULL pointer will be dereferenced. Return an error code (-ENOMEM) instead. Signed-off-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Tested-by:
Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Lihong Yang authored
This patch removes the !vf condition check that cannot be true in i40e_ndo_set_vf_trust function Detected by CoverityScan, CID 1397531 Logically dead code Signed-off-by:
Lihong Yang <lihong.yang@intel.com> Tested-by:
Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Shannon Nelson authored
When a machine has more CPUs than queue pairs, e.g. 512 cores, the counting gets a little funky and turns off Flow Director with the message: not enough queues for Flow Director. Flow Director feature is disabled This patch limits the number of lan queues initially allocated to be sure we have some left for FD and other features. Signed-off-by:
Shannon Nelson <shannon.nelson@oracle.com> Tested-by:
Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queueDavid S. Miller authored
Jeff Kirsher says: ==================== 100GbE Intel Wired LAN Driver Updates 2017-10-02 This series contains updates to fm10k only. Jake provides all but one of the changes in this series. Most are small fixes, starting with ensuring prompt transmission of messages queued up after each VF message is received and handled. Fix a possible race condition between the watchdog task and the processing of mailbox messages by just checking whether the mailbox is still open. Fix a couple of GCC v7 warnings, including misspelled "fall through" comments and warnings about possible truncation of calls to snprintf(). Cleaned up a convoluted bitshift and read for the PFVFLRE register. Fixed a potential divide by zero when finding the proper r_idx. Markus Elfring fixes an issue which was found using Coccinelle, where we should have been using seq_putc() instead of seq_puts(). ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Mika Westerberg says: ==================== Thunderbolt networking In addition of tunneling PCIe, Display Port and USB traffic, Thunderbolt allows connecting two hosts (domains) over a Thunderbolt cable. It is possible to tunnel arbitrary data packets over such connection using high-speed DMA rings available in the Thunderbolt host controller. In order to discover Thunderbolt services the other host supports, there is a software protocol running on top of the automatically configured control channel (ring 0). This protocol is called XDomain discovery protocol and it uses XDomain properties to describe the host (domain) and the services it supports. Once both sides have agreed what services are supported they can enable high-speed DMA rings to transfer data over the cable. This series adds support for the XDomain protocol so that we expose each remote connection as Thunderbolt XDomain device and each service as Thunderbolt service device. On top of that we create an API that allows writing drivers for these services and finally we provide an example Thunderbolt service driver that creates virtual ethernet inferface that allows tunneling networking packets over Thunderbolt cable. The API could be used for creating other future Thunderbolt services, such as tunneling SCSI over Thunderbolt, for example. The XDomain protocol and networking support is also available in macOS and Windows so this makes it possible to connect Linux to macOS and Windows as well. The patches are based on previous Thunderbolt networking patch series by Amir Levy and Michael Jamet, that can be found here: https://lwn.net/Articles/705998/ The main difference to that patch series is that we have the XDomain protocol running in the kernel now so there is no need for a separate userspace daemon. Note this does not affect the existing functionality, so security levels and NVM firmware upgrade continue to work as before (with the small exception that now sysfs also shows the XDomain connections and services in addition to normal Thunderbolt devices). It is also possible to connect up to 5 Thunderbolt devices and then another host, and the network driver works exactly the same. This is third version of the patch series. The previous versions can be be found here: v2: https://lkml.org/lkml/2017/9/25/225 v1: https://lwn.net/Articles/734019/ Changes from the v2: * Add comment regarding calculation of interrupt throttling value * Add UUIDs as strings in comments on top of each declaration * Add a patch removing __packed from existing ICM messages. They are all 32-bit aligned and should pack fine without the __packed. * Move adding MAINTAINERS entries to a separate patches * Added Michael and Yehezkel to be maintainers of the network driver * Remove __packed from the new ICM messages. They should pack fine as well without it. * Call register_netdev() after all other initialization is done in the network driver. * Use build_skb() instead of copying. We allocate order 1 page here to leave room for SKB shared info required by build_skb(). However, we do not leave room for full NET_SKB_PAD because the NHI hardware does not cope well if a frame crosses 4kB boundary. According comments in __build_skb() that should still be fine. * Added Reviewed-by tag from Andy. Changes from the v1: * Add include/linux/thunderbolt.h to MAINTAINERS * Correct Linux version and date of new sysfs entries in Documentation/ABI/testing/sysfs-bus-thunderbolt * Move network driver from drivers/thunderbolt/net.c to drivers/net/thunderbolt.c and update it to follow coding style in drivers/net/*. * Add MAINTAINERS entry for the network driver * Minor cleanups In case someone wants to try this out, the last patch adds documentation how the networking driver can be used. In short, if you connect Linux to a macOS or Windows, everything is done automatically (as those systems have the networking service enabled by default). For Linux to Linux connection one host needs to load the networking driver first (so that the other side can locate the networking service and load the corresponding driver). ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Mika Westerberg authored
I will be maintaining the Thunderbolt network driver along with Michael and Yehezkel. Signed-off-by:
Michael Jamet <michael.jamet@intel.com> Signed-off-by:
Yehezkel Bernat <yehezkel.bernat@intel.com> Signed-off-by:
Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Amir Levy authored
ThunderboltIP is a protocol created by Apple to tunnel IP/ethernet traffic over a Thunderbolt cable. The protocol consists of configuration phase where each side sends ThunderboltIP login packets (the protocol is determined by UUID in the XDomain packet header) over the configuration channel. Once both sides get positive acknowledgment to their login packet, they configure high-speed DMA path accordingly. This DMA path is then used to transmit and receive networking traffic. This patch creates a virtual ethernet interface the host software can use in the same way as any other networking interface. Once the interface is brought up successfully network packets get tunneled over the Thunderbolt cable to the remote host and back. The connection is terminated by sending a ThunderboltIP logout packet over the configuration channel. We do this when the network interface is brought down by user or the driver is unloaded. Signed-off-by:
Amir Levy <amir.jer.levy@intel.com> Signed-off-by:
Michael Jamet <michael.jamet@intel.com> Signed-off-by:
Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by:
Yehezkel Bernat <yehezkel.bernat@intel.com> Reviewed-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Mika Westerberg authored
The new API header (include/linux/thunderbolt.h) is maintained by the Thunderbolt driver maintainers. Signed-off-by:
Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by:
Michael Jamet <michael.jamet@intel.com> Reviewed-by:
Yehezkel Bernat <yehezkel.bernat@intel.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Mika Westerberg authored
Thunderbolt services should not care which HopID (ring) they use for sending and receiving packets over the high-speed DMA path, so make tb_ring_alloc_rx() and tb_ring_alloc_tx() accept negative HopID. This means that the NHI will allocate next available HopID for the caller automatically. These HopIDs will be allocated from the range which is not reserved for the Thunderbolt protocol (8 .. hop_count - 1). The allocated HopID can be retrieved from ring->hop field after the ring has been allocated successfully if needed. Signed-off-by:
Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by:
Michael Jamet <michael.jamet@intel.com> Reviewed-by:
Yehezkel Bernat <yehezkel.bernat@intel.com> Reviewed-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Mika Westerberg authored
This is needed when Thunderbolt service drivers need to DMA map memory before it is passed down to the ring. Signed-off-by:
Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by:
Michael Jamet <michael.jamet@intel.com> Reviewed-by:
Yehezkel Bernat <yehezkel.bernat@intel.com> Reviewed-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Mika Westerberg authored
In order to support things like networking over Thunderbolt cable, there needs to be a way to switch the ring to a mode where it can be polled with the interrupt masked. We implement such mode so that the caller can allocate a ring by passing pointer to a function that is then called when an interrupt is triggered. Completed frames can be fetched using tb_ring_poll() and the interrupt can be re-enabled when the caller is finished with polling by using tb_ring_poll_complete(). Signed-off-by:
Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by:
Michael Jamet <michael.jamet@intel.com> Reviewed-by:
Yehezkel Bernat <yehezkel.bernat@intel.com> Reviewed-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Mika Westerberg authored
This is needed because ring polling functionality can be called from atomic contexts when networking and other high-speed traffic is transferred over a Thunderbolt cable. Signed-off-by:
Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by:
Michael Jamet <michael.jamet@intel.com> Reviewed-by:
Yehezkel Bernat <yehezkel.bernat@intel.com> Reviewed-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Mika Westerberg authored
This makes it possible to enqueue frames also from atomic context which is needed for example, when networking packets are sent over a Thunderbolt cable. Signed-off-by:
Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by:
Michael Jamet <michael.jamet@intel.com> Reviewed-by:
Yehezkel Bernat <yehezkel.bernat@intel.com> Reviewed-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Mika Westerberg authored
A Thunderbolt service driver might need to check if there was an error with the descriptor when in frame mode. We also add two Rx specific error flags RING_DESC_CRC_ERROR and RING_DESC_BUFFER_OVERRUN. Signed-off-by:
Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by:
Michael Jamet <michael.jamet@intel.com> Reviewed-by:
Yehezkel Bernat <yehezkel.bernat@intel.com> Reviewed-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Mika Westerberg authored
These are used by Thunderbolt services to send and receive frames over the high-speed DMA rings. We also put the functions to tb_ namespace to make sure we do not collide with others and add missing kernel-doc comments for the exported functions. Signed-off-by:
Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by:
Michael Jamet <michael.jamet@intel.com> Reviewed-by:
Yehezkel Bernat <yehezkel.bernat@intel.com> Reviewed-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Mika Westerberg authored
When high-speed DMA paths are used to transfer arbitrary data over a Thunderbolt link, DMA rings should be in frame mode instead of raw mode. The latter is used by the control channel (ring 0). In frame mode each data frame can hold up to 4kB payload. This patch modifies the DMA ring code to allow configuring a ring to be in frame mode by passing a new flag (RING_FLAG_FRAME) to the ring when it is allocated. In addition there might be need to enable end-to-end (E2E) workaround for the ring to prevent losing Rx frames in certain situations. We add another flag (RING_FLAG_E2E) that can be used for this purpose. This code is based on the work done by Amir Levy and Michael Jamet. Signed-off-by:
Michael Jamet <michael.jamet@intel.com> Signed-off-by:
Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by:
Yehezkel Bernat <yehezkel.bernat@intel.com> Reviewed-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Mika Westerberg authored
This will keep the interrupt delivery rate reasonable. The value used here (128 us) is a recommendation from the hardware people. This code is based on the work done by Amir Levy and Michael Jamet. Signed-off-by:
Michael Jamet <michael.jamet@intel.com> Signed-off-by:
Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by:
Yehezkel Bernat <yehezkel.bernat@intel.com> Reviewed-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Mika Westerberg authored
When two hosts are connected over a Thunderbolt cable, there is a protocol they can use to communicate capabilities supported by the host. The discovery protocol uses automatically configured control channel (ring 0) and is build on top of request/response transactions using special XDomain primitives provided by the Thunderbolt base protocol. The capabilities consists of a root directory block of basic properties used for identification of the host, and then there can be zero or more directories each describing a Thunderbolt service and its capabilities. Once both sides have discovered what is supported the two hosts can setup high-speed DMA paths and transfer data to the other side using whatever protocol was agreed based on the properties. The software protocol used to communicate which DMA paths to enable is service specific. This patch adds support for the XDomain discovery protocol to the Thunderbolt bus. We model each remote host connection as a Linux XDomain device. For each Thunderbolt service found supported on the XDomain device, we create Linux Thunderbolt service device which Thunderbolt service drivers can then bind to based on the protocol identification information retrieved from the property directory describing the service. This code is based on the work done by Amir Levy and Michael Jamet. Signed-off-by:
Michael Jamet <michael.jamet@intel.com> Signed-off-by:
Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by:
Yehezkel Bernat <yehezkel.bernat@intel.com> Reviewed-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Mika Westerberg authored
A Thunderbolt service might need to find the physical port from a link the cable is connected to. For instance networking driver uses this information to generate MAC address according the Apple ThunderboltIP protocol. Move this function to thunderbolt.h and rename it to tb_phy_port_from_link() to reflect the fact that it does not take switch as parameter. Signed-off-by:
Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by:
Michael Jamet <michael.jamet@intel.com> Reviewed-by:
Yehezkel Bernat <yehezkel.bernat@intel.com> Reviewed-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Mika Westerberg authored
These are needed by Thunderbolt services so move them to thunderbolt.h to make sure they are available outside of drivers/thunderbolt. Signed-off-by:
Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by:
Michael Jamet <michael.jamet@intel.com> Reviewed-by:
Yehezkel Bernat <yehezkel.bernat@intel.com> Reviewed-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Mika Westerberg authored
These will be needed by Thunderbolt services when sending and receiving XDomain control messages. While there change TB_CFG_PKG_PREPARE_TO_SLEEP value to be decimal in order to be consistent with other members. Signed-off-by:
Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by:
Michael Jamet <michael.jamet@intel.com> Reviewed-by:
Yehezkel Bernat <yehezkel.bernat@intel.com> Reviewed-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Mika Westerberg authored
Thunderbolt XDomain discovery protocol uses directories which contain properties and other directories to exchange information about what capabilities the remote host supports. This also includes identification information like device ID and name. This adds support for parsing and formatting these properties and establishes an API drivers can use in addition to the core Thunderbolt driver. This API is exposed in a new header: include/linux/thunderbolt.h. This code is based on the work done by Amir Levy and Michael Jamet. Signed-off-by:
Michael Jamet <michael.jamet@intel.com> Signed-off-by:
Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by:
Yehezkel Bernat <yehezkel.bernat@intel.com> Reviewed-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Mika Westerberg authored
These messages are all 32-bit aligned and they should be packed without the __packed attribute just fine. It also allows compiler to generate better code on some architectures. Signed-off-by:
Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by:
Michael Jamet <michael.jamet@intel.com> Reviewed-by:
Yehezkel Bernat <yehezkel.bernat@intel.com> Reviewed-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Mika Westerberg authored
We will be using these when communicating XDomain discovery protocol over Thunderbolt link but they might be useful for other drivers as well. Make them available through byteorder/generic.h. Suggested-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by:
Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by:
Michael Jamet <michael.jamet@intel.com> Reviewed-by:
Yehezkel Bernat <yehezkel.bernat@intel.com> Reviewed-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Jiri Pirko says: ==================== mlxsw: Fixlets Couple of small nit fixes from Petr ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Petr Machata authored
Signed-off-by:
Petr Machata <petrm@mellanox.com> Reviewed-by:
Ido Schimmel <idosch@mellanox.com> Signed-off-by:
Jiri Pirko <jiri@mellanox.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-