- 10 Sep, 2020 11 commits
-
-
Mark Brown authored
Merge series "ASoC: q6dsp: Add support to Codec Ports." from Srinivas Kandagatla <srinivas.kandagatla@linaro.org>: LPASS IP on SoCs like SM8250 has Digital Codec part integrated into it. This ports are exposed in Q6DSP as Codec ports. This patchset adds support to those q6afe ports along with q6routing and q6afe-dai. This patchset has been tested along with other patches on Qualcomm Robotics RB5 Platform with Soundwire and WSA8815 Codec. Thanks, srini Srinivas Kandagatla (8): ASoC: q6dsp: q6afe: add support to Codec DMA ports ASoC: q6dsp: q6routing: add support to Codec DMA ports ASoC: q6dsp: q6afe: prepare afe_apr_send_pkt to take response opcode ASoC: q6dsp: q6afe: add global q6afe waitqueue ASoC: q6dsp: q6afe: add lpass hw voting support ASoC: q6dsp: q6afe: update q6afe_set_param to support global clocks ASoC: q6dsp: q6afe: add codec lpass clocks ASoC: q6dsp: q6afe-dai: add support to Codec DMA ports include/dt-bindings/sound/qcom,q6afe.h | 22 ++ sound/soc/qcom/qdsp6/q6afe-dai.c | 229 ++++++++++++++++++ sound/soc/qcom/qdsp6/q6afe.c | 308 +++++++++++++++++++++++-- sound/soc/qcom/qdsp6/q6afe.h | 33 ++- sound/soc/qcom/qdsp6/q6routing.c | 121 +++++++++- 5 files changed, 689 insertions(+), 24 deletions(-) -- 2.21.0
-
Srinivas Kandagatla authored
Signed-off-by:
Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20200910101732.23484-9-srinivas.kandagatla@linaro.orgSigned-off-by:
Mark Brown <broonie@kernel.org>
-
Srinivas Kandagatla authored
LPASS now has integrated codec control whose clocks are controlled by Q6DSP. This patch adds support to those clocks. Signed-off-by:
-
Srinivas Kandagatla authored
Previously there was no case where we need to set clock or send commands that are not associated with q6afe ports, now we have cases like clock voting and clock consumers like codecs that needed these clocks. update q6afe_set_param() to support such cases, including token passing. Signed-off-by:
-
Srinivas Kandagatla authored
Signed-off-by:
-
Srinivas Kandagatla authored
In some cases like clocks q6afe would have to process commands without an associated q6afe port, in such cases waitqueue is required at global level to wait for the command to finish. This patch also adds the command result to go with this waitqueue. Signed-off-by:
-
Srinivas Kandagatla authored
Update afe_apr_send_pkt() to take response opcode that it should wait for. This is helpful in cases where we expect response other than the actual command opcode. Signed-off-by:
-
Srinivas Kandagatla authored
Signed-off-by:
-
Srinivas Kandagatla authored
New LPASS supports various codec macros, DSP firmware already has support to those ports. Add corresponding configuration support to those ports in adsp drivers. Signed-off-by:
-
Tzung-Bi Shih authored
Adds DT binding document for rt1015p. Signed-off-by:
Tzung-Bi Shih <tzungbi@google.com> Link: https://lore.kernel.org/r/20200910042949.3795682-3-tzungbi@google.comSigned-off-by:
-
Tzung-Bi Shih authored
Adds rt1015p codec driver. Rt1015p is a rt1015 variant. - It doesn't support I2C. - It only supports S24, 48kHz, 64FS. Signed-off-by:
-
- 09 Sep, 2020 6 commits
-
-
Codrin Ciubotariu authored
This patch adds DT bindings for the new Microchip S/PDIF TX Controller embedded inside sama7g5 SoCs. Signed-off-by:
Codrin Ciubotariu <codrin.ciubotariu@microchip.com> Reviewed-by:
Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20200909145348.367033-1-codrin.ciubotariu@microchip.comSigned-off-by:
-
Codrin Ciubotariu authored
The new SPDIF TX controller is a serial port compliant with the IEC- 60958 standard. It also supports programmable User Data and Channel Status fields. This IP is embedded in Microchip's sama7g5 SoC. Signed-off-by:
-
Takashi Iwai authored
The tasklet is an old API that should be deprecated, usually can be converted to another decent API. In ASoC TXx9 ACLC driver, a tasklet is still used for offloading the hardware reset function. It can be achieved gracefully with a work queued, too. This patch replaces the tasklet usage in TXx9 ACLC driver with a simple work. The conversion is fairly straightforward. Signed-off-by:
Takashi Iwai <tiwai@suse.de> Link: https://lore.kernel.org/r/20200903104749.21435-4-tiwai@suse.deSigned-off-by:
-
Takashi Iwai authored
The tasklet is an old API that should be deprecated, usually can be converted to another decent API. In ASoC SH SIU driver, a tasklet is still used for offloading the hardware reset function. It can be achieved gracefully with a work queued, too. This patch replaces the tasklet usage in SH SIU driver with a simple work. The conversion is fairly straightforward. Signed-off-by:
-
Takashi Iwai authored
The tasklet is an old API that should be deprecated, usually can be converted to another decent API. In ASoC FSL ESAI CPU DAI driver, a tasklet is still used for offloading the hardware reset function. It can be achieved gracefully with a work queued, too. This patch replaces the tasklet usage in fsl esai driver with a simple work. The conversion is fairly straightforward. Signed-off-by:
-
Mark Brown authored
Merge branch 'topic/tasklet-convert' of https://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound into asoc-5.10
-
- 08 Sep, 2020 8 commits
-
-
Mark Brown authored
Merge series "ASoC: qcom: common: Parse auxiliary devices from device tree" from Stephan Gerhold <stephan@gerhold.net>: In some cases we need to probe additional audio components that do not appear as part of the DAI links specified in the device tree. Examples for this are auxiliary devices such as analog amplifiers or codecs. The ASoC core provides a way to probe these components by adding them to snd_soc_card->aux_dev. This patch set allows specifying them in the device tree through a new "aux-devs" property. v1: https://lore.kernel.org/linux-arm-msm/20200819091533.2334-1-stephan@gerhold.net/ Changes in v2: - Fix value type in device tree bindings: aux-devs should be array of phandles without any arguments, so change <phandles with arguments> -> <array of phandles> Stephan Gerhold (2): ASoC: dt-bindings: qcom: Document "aux-devs" property ASoC: qcom: common: Parse auxiliary devices from device tree .../devicetree/bindings/sound/qcom,apq8016-sbc.txt | 7 +++++++ Documentation/devicetree/bindings/sound/qcom,apq8096.txt | 8 ++++++++ Documentation/devicetree/bindings/sound/qcom,sdm845.txt | 8 ++++++++ sound/soc/qcom/common.c | 4 ++++ 4 files changed, 27 insertions(+) -- 2.28.0
-
Yu Kuai authored
if of_find_device_by_node() succeed, imx_es8328_probe() doesn't have a corresponding put_device(). Thus add a jump target to fix the exception handling for this function implementation. Fixes: 7e7292db ("ASoC: fsl: add imx-es8328 machine driver") Signed-off-by:
Yu Kuai <yukuai3@huawei.com> Link: https://lore.kernel.org/r/20200825130224.1488694-1-yukuai3@huawei.comSigned-off-by:
-
Stephan Gerhold authored
In some cases we need to probe additional audio components that do not appear as part of the DAI links specified in the device tree. Examples for this are auxiliary devices such as analog amplifiers or codecs. The ASoC core provides a way to probe these components by adding them to snd_soc_card->aux_dev. We can use the snd_soc_of_parse_aux_devs() function to parse them from the device tree. As an example for this, some MSM8916 smartphones have an analog speaker amplifier connected to the HPHR output. With the new property this can be modelled as follows: speaker-amp: audio-amplifier { compatible = "simple-audio-amplifier"; enable-gpios = <&msmgpio 114 GPIO_ACTIVE_HIGH>; sound-name-prefix = "Speaker Amp"; }; &sound { aux-devs = <&speaker_amp>; audio-routing = "Speaker Amp IN", "HPHR"; }; Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by:Stephan Gerhold <stephan@gerhold.net> Link: https://lore.kernel.org/r/20200826095141.94017-3-stephan@gerhold.netSigned-off-by:
-
Stephan Gerhold authored
In some cases we need to probe additional audio components that do not appear as part of the DAI links specified in the device tree. Examples for this are auxiliary devices such as analog amplifiers or codecs. To make them work they need to be added as part of "aux-devs" and connected to some other audio component using the audio routes configurable using "(qcom,)audio-routing". Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by:
-
Tzung-Bi Shih authored
Mt6359 platform device is instantiated by mfd_add_devices(). In the case, dev->of_node is NULL so that mt6359_parse_dt() always fails to parse the desired DT properties. Gets the DT properties via dev->parent->of_node. Fixes: 8061734a ("ASoC: mediatek: mt6359: add codec driver") Signed-off-by:
-
Dharageswari R authored
This patch implements the snd_sof_bytes_ext_volatile_get() to read the actual parameters from DSP by sending the SOF_IPC_COMP_GET_DATA IPC for the kcontrol of type SOF_TPLG_KCTL_BYTES_VOLATILE_RO. Signed-off-by:
Dharageswari R <dharageswari.r@intel.com> Reviewed-by:
Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com> Reviewed-by:
Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Reviewed-by:
Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by:
Kai Vehmanen <kai.vehmanen@linux.intel.com> Link: https://lore.kernel.org/r/20200908092825.1813847-2-kai.vehmanen@linux.intel.comSigned-off-by:
-
Dharageswari R authored
This patch adds support for write-only and read-only TLV byte kcontrols by checking for appropriate get/put IO handlers. Signed-off-by:
-
Peter Ujfalusi authored
The initial machine driver supports only j721e-cpb and the ivi addon, but other EVMs for different K3 SoC can have similar audio setup which can be supported by the driver with small or no modification. Signed-off-by:
Peter Ujfalusi <peter.ujfalusi@ti.com> Link: https://lore.kernel.org/r/20200908113204.12012-1-peter.ujfalusi@ti.comSigned-off-by:
-
- 07 Sep, 2020 15 commits
-
-
Mark Brown authored
Now that the fixes series is merged, here is a series of small cleanups to the sun8i-codec driver. These help shorten the patch stack for the next series, which will add support for the other two DAIs in this codec: AIF2 and AIF3. Samuel Holland (9): ASoC: sun8i-codec: Remove extraneous widgets ASoC: sun8i-codec: Fix AIF1 MODCLK widget name ASoC: sun8i-codec: Fix AIF1_ADCDAT_CTRL field names ASoC: sun8i-codec: Fix AIF1_MXR_SRC field names ASoC: sun8i-codec: Fix ADC_DIG_CTRL field name ASoC: sun8i-codec: Fix field bit number indentation ASoC: sun8i-codec: Sort masks in a consistent order ASoC: sun8i-codec: Attach the bus clock to the regmap ASoC: sun8i-codec: Manage module clock via DAPM sound/soc/sunxi/sun8i-codec.c | 104 ++++++++++++---------------------- 1 file changed, 37 insertions(+), 67 deletions(-) -- 2.26.2
-
Mark Brown authored
Merge series "ASoC: SOF: component UUID support for 5.10" from Kai Vehmanen <kai.vehmanen@linux.intel.com>: This series adds support for UUID based component identification in SOF. UUIDs provide a more scalable alternative to the old component type based approach to identify which DSP components should be loaded. More detailed description of UUID usage in SOF is available in: https://thesofproject.github.io/latest/developer_guides/uuid/ UUID support is an incremental update to the SOF IPC interface. Driver remains compatible with pre-UUID (ABI <3.17) firmware versions. Keyon Jie (16): ASoC: SOF: tokens: add token for component UUID ASoC: SOF: add comp_ext to struct snd_sof_widget ASoC: SOF: topology: create component extended tokens ASoC: SOF: topology: parse comp_ext_tokens for all widgets ASoC: SOF: use the sof_ipc_comp reserved bytes for extended data ASoC: SOF: topology: add helper for setting up IPC component ASoC: SOF: append extended data to sof_ipc_comp_dai ASoC: SOF: append extended data to sof_ipc_comp_mixer ASoC: SOF: append extended data to sof_ipc_comp_volume ASoC: SOF: append extended data to sof_ipc_comp_host ASoC: SOF: append extended data to sof_ipc_comp_src ASoC: SOF: append extended data to sof_ipc_comp_asrc ASoC: SOF: append extended data to sof_ipc_comp_tone ASoC: SOF: append extended data to sof_ipc_comp_process ASoC: SOF: append extended data to sof_ipc_comp_mux ASoC: SOF: topology: make process type optional include/sound/sof/topology.h | 12 +- include/uapi/sound/sof/tokens.h | 1 + sound/soc/sof/sof-audio.c | 23 +++- sound/soc/sof/sof-audio.h | 3 + sound/soc/sof/topology.c | 208 ++++++++++++++++++++------------ 5 files changed, 161 insertions(+), 86 deletions(-) -- 2.27.0
-
Mark Brown authored
Merge series "ASoC: Add sdw stream operations to dailink ops." from Bard Liao <yung-chuan.liao@linux.intel.com>: Sdw stream operation APIs can be called once per stream. Move these operations to dailink ops. The linked series is "soundwire: Remove sdw stream operations from Intel soundwire dai". Reviewed-by:Vinod Koul <vkoul@kernel.org> Changes in v3: - s/ASOC/ASoC Pierre-Louis Bossart (3): ASoC: soc-dai: clarify return value for get_sdw_stream() ASoC: Intel: sof_sdw: add dailink .trigger callback ASoC: Intel: sof_sdw: add dailink .prepare and .hw_free callback include/sound/soc-dai.h | 3 +- sound/soc/intel/boards/sof_sdw.c | 81 ++++++++++++++++++++++++++++++++ 2 files changed, 83 insertions(+), 1 deletion(-) -- 2.17.1
-
Michael Sit Wei Hong authored
To set platform in slave mode setting the MASTER_MODE bit is not needed. Removing !MASTER_MODE conditional to avoid potential errors and warning. Signed-off-by:
Michael Sit Wei Hong <michael.wei.hong.sit@intel.com> Reported-by:
Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by:
-
Keyon Jie authored
As components can be now identified with a UUID based mechanism, the process type is no longer required. For new DSP components, process and its component type can be set to SOF_PROCESS_NONE and SOF_COMP_NONE. Allow this combination in topology load, modify the load time check for process type to reflect this. Signed-off-by:
Keyon Jie <yang.jie@linux.intel.com> Reviewed-by:
Curtis Malainey <curtis@malainey.com> Signed-off-by:
-
Keyon Jie authored
Append the extended data to the end of the struct sof_ipc_comp_mux, construct the ipc for COMP_NEW during the topology load stage. Signed-off-by:
-
Keyon Jie authored
Append the extended data to the end of the struct sof_ipc_comp_process, construct the ipc for COMP_NEW during the topology load stage. Signed-off-by:
-
Keyon Jie authored
Append the extended data to the end of the struct sof_ipc_comp_tone, construct the ipc for COMP_NEW during the topology load stage. Signed-off-by:
-
Keyon Jie authored
Append the extended data to the end of the struct sof_ipc_comp_asrc, construct the ipc for COMP_NEW during the topology load stage. Signed-off-by:
-
Keyon Jie authored
Append the extended data to the end of the struct sof_ipc_comp_src, construct the ipc for COMP_NEW during the topology load stage. Signed-off-by:
-
Keyon Jie authored
Append the extended data to the end of the struct sof_ipc_comp_host, construct the ipc for COMP_NEW during the topology load stage. Signed-off-by:
-
Keyon Jie authored
Append the extended data to the end of the struct sof_ipc_comp_volume, construct the ipc for COMP_NEW during the topology load stage. Signed-off-by:
-
Keyon Jie authored
Append the extended data to the end of the struct sof_ipc_comp_mixer, construct the ipc for COMP_NEW during the topology load stage. Signed-off-by:
-
Keyon Jie authored
Append the extended data to the end of the struct sof_ipc_comp_dai, and update the ext_data_offset, to construct the IPC for the topology load and runtime restore. Signed-off-by:
-
Keyon Jie authored
Add helper to allocate buffer for IPC component, configure the basic settings, and set up the extended data for the subsequent IPC sending. Signed-off-by:
-
