- 16 May, 2018 40 commits
-
-
Kieran Bingham authored
The DU1 external dot clock is provided by the fixed frequency clock generator X21, while the DU0 and DU3 clocks are provided by the programmable Versaclock5 clock generator. Enable the clocks, and the HDMI encoder for the M3-N Salvator-X board and hook it up to the HDMI connector. Based on patches from Takeshi Kihara <takeshi.kihara.df@renesas.com> Signed-off-by:
Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Reviewed-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
Simon Horman <horms+renesas@verge.net.au>
-
Kieran Bingham authored
Add the HDMI encoder to the R8A77965 DT in disabled state. Based on a similar patch of the R8A7796 device tree by Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>. Signed-off-by:
Takeshi Kihara <takeshi.kihara.df@renesas.com> [Kieran: Rebase to top of tree] Signed-off-by:
-
Kieran Bingham authored
The DU entity node has been previously added but only as a placeholder. Populate the node with the properties to use the device. Signed-off-by:
-
Kieran Bingham authored
The r8a77965 has 4 VSP instances. Based on a similar patch of the R8A7796 device tree by Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>. Signed-off-by:
-
Kieran Bingham authored
The FCPs handle the interface between various IP cores and memory. Add the instances related to the FDPs and VSP2s. Based on a similar patch of the R8A7796 device tree by Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>. Signed-off-by:
-
Yoshihiro Shimoda authored
The cache controller node should not have unit-addresses and reg properties. So, this patch removes them. Signed-off-by:
Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Reviewed-by:
Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by:
-
Yoshihiro Shimoda authored
The basic support patch 9491a8b17530 ("arm64: dts: renesas: Add Renesas R8A77990 SoC support") lacks the compatible "arm,psci-1.0" in the psci node. So, this patch revises it. Signed-off-by: -
Simon Horman authored
Remove 'status = "disabled"' to make sure all IPMMU devices are enabled in DT on the r8a7795 ES1.0 Soc. This is a follow up for a patch by Magnus Damm for the the r8a7795 ES2.0 and other R-Car Gen 3 SoCs. Signed-off-by:
-
Kuninori Morimoto authored
Signed-off-by:
Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Tested-by:
Nguyen Viet Dung <nv-dung@jinso.co.jp> Signed-off-by:
-
Kuninori Morimoto authored
Signed-off-by:
-
Kuninori Morimoto authored
Signed-off-by:
-
Kuninori Morimoto authored
Signed-off-by:
-
Kuninori Morimoto authored
Signed-off-by:
-
Kuninori Morimoto authored
Current Sound is using simple-audio-card which can't support HDMI. To use HDMI sound, we need to use audio-graph-card. But, one note is that r8a7795 has 2 HDMI ports, but r8a7796 has 1. Because of this mismatch, supporting HDMI on salvator-common is impossible. Thus, this patch exchange sound card to audio-graph-card and keep supporting ak4613 as 1st sound node. r8a7795/r8a7796 salvator-x{s} need to add HDMI sound individually. Signed-off-by: -
Kuninori Morimoto authored
Signed-off-by:
-
Kuninori Morimoto authored
Signed-off-by:
-
Sergei Shtylyov authored
Define the generic R8A77980 part of the MMC0 (SDHI2) device node. Signed-off-by:
Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by:
-
Sergei Shtylyov authored
Add the (previously omitted) EtherAVB pin data to the Condor board's device tree. Signed-off-by:
-
Sergei Shtylyov authored
Add the (previously omitted) SCIF0 pin data to the Condor board's device tree. Signed-off-by:
-
Sergei Shtylyov authored
Define the generic R8A77980 part of the PFC device node. Signed-off-by:
-
Sergei Shtylyov authored
Add the (previously omitted) EtherAVB pin data to the V3M Starter Kit board's device tree. Signed-off-by:
-
Sergei Shtylyov authored
Add the (previously omitted) EtherAVB pin data to the Eagle board's device tree. Signed-off-by:
-
Geert Uytterhoeven authored
On other Renesas SoCs, the pin group for the MDIO bus is named "mdio" instead of "mdc". Fix the inconsistency, now the pinctrl drivers for R-Car H3, M3-W, and M3-N have gained support for the traditional pin group name. Signed-off-by:
-
Geert Uytterhoeven authored
On other Renesas SoCs, the pin group for the MDIO bus is named "mdio" instead of "mdc". Fix the inconsistency, now the pinctrl drivers for R-Car H3, M3-W, and M3-N have gained support for the traditional pin group name. Signed-off-by:
-
Geert Uytterhoeven authored
On other Renesas SoCs, the pin group for the MDIO bus is named "mdio" instead of "mdc". Fix the inconsistency, now the pinctrl drivers for R-Car H3, M3-W, and M3-N have gained support for the traditional pin group name. Signed-off-by:
-
Magnus Damm authored
Remove 'status = "disabled"' to make sure all IPMMU devices are enabled in DT on the r8a77995 SoC. Signed-off-by:
Magnus Damm <damm+renesas@opensource.se> Reviewed-by:
-
Magnus Damm authored
Remove 'status = "disabled"' to make sure all IPMMU devices are enabled in DT on the r8a77970 SoC. Signed-off-by:
-
Magnus Damm authored
Remove 'status = "disabled"' to make sure all IPMMU devices are enabled in DT on the r8a7796 SoC. Signed-off-by:
-
Magnus Damm authored
Remove 'status = "disabled"' to make sure all IPMMU devices are enabled in DT on the r8a7795 SoC. Signed-off-by:
-
Takeshi Kihara authored
Basic support for the Renesas Ebisu board based on R-Car E3: - Memory, - Main crystal, - Serial console, Signed-off-by:
-
Yoshihiro Shimoda authored
This patch adds basic support for the Renesas R-Car E3 (R8A77990) SoC: - PSCI - CPU (single) - Cache controller - Main clocks and controller - Interrupt controller - Timer - PMU - Reset controller - Product register - System controller - UART for console Inspried by a patch by Takeshi Kihara in the BSP. Signed-off-by:
-
Yoshihiro Kaneko authored
Sort subnodes of the soc node. - The primary key is the bus address. - The secondary key is the IP block. - The tertiary key is the node name. This is part of an ongoing effort to provide consistent node order in the DT of Renesas SoCs to improve maintainability. This should not have any run-time effect. Signed-off-by:
Yoshihiro Kaneko <ykaneko0929@gmail.com> [simon: rebased; move fcpvd0 to after vspd0] Signed-off-by:
-
Yoshihiro Kaneko authored
Sort subnodes of the soc node. - The primary key is the bus address. - The secondary key is the IP block. - The tertiary key is the node name. This is part of an ongoing effort to provide consistent node order in the DT of Renesas SoCs to improve maintainability. This should not have any run-time effect. Signed-off-by:
-
Yoshihiro Kaneko authored
Sort subnodes of the root node alphanumerically. This is part of an ongoing effort to provide consistent node order in the DT of Renesas SoCs to improve maintainability. This should not have any run-time effect. Signed-off-by:
-
Yoshihiro Kaneko authored
Sort subnodes of the soc node. - The primary key is the bus address. - The secondary key is the IP block. - The tertiary key is the node name. This is part of an ongoing effort to provide consistent node order in the DT of Renesas SoCs to improve maintainability. This should not have any run-time effect. Signed-off-by:
-
Yoshihiro Kaneko authored
Sort subnodes of the root node alphanumerically. This is part of an ongoing effort to provide consistent node order in the DT of Renesas SoCs to improve maintainability. This should not have any run-time effect. Signed-off-by:
-
Jacopo Mondi authored
Enable HDMI output on Renesas R-Car V3M Eagle board. The HDMI output is enabled connecting the DU LVDS output to the transparent LVDS converter THC63LVD1024, and successively routing its RGB output to the ADV7511W HDMI encoder. Signed-off-by:
Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Signed-off-by:
Jacopo Mondi <jacopo+renesas@jmondi.org> Reviewed-by:
Andrzej Hajda <a.hajda@samsung.com> Signed-off-by:
-
Sergei Shtylyov authored
Define the generic R8A77970 part of the LVDS device node. Signed-off-by:
-
Sergei Shtylyov authored
Define the generic R8A77970 part of the DU device node. Based on the original (and large) patch by Daisuke Matsushita <daisuke.matsushita.ns@hitachi.com>. Signed-off-by:
Vladimir Barinov <vladimir.barinov@cogentembedded.com> Signed-off-by:
-
Sergei Shtylyov authored
Describe VSPD0 in the R8A77970 device tree; it will be used by DU in the next patch... Based on the original (and large) patch by Daisuke Matsushita <daisuke.matsushita.ns@hitachi.com>. Signed-off-by:
-
