This patch adds support for per-socket SRH injection with the setsockopt
system call through the IPPROTO_IPV6, IPV6_RTHDR options.
The SRH is pushed through the ipv6_push_nfrag_opts function.
Signed-off-by: David Lebrun <david.lebrun@uclouvain.be>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch prepares for insertion of SRH through setsockopt().
The new source address argument is used when an HMAC field is
present in the SRH, which must be filled. The HMAC signature
process requires the source address as input text.
Signed-off-by: David Lebrun <david.lebrun@uclouvain.be>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch enables the verification of the HMAC signature for transiting
SR-enabled packets, and its insertion on encapsulated/injected SRH.
Signed-off-by: David Lebrun <david.lebrun@uclouvain.be>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch provides an implementation of the genetlink commands
to associate a given HMAC key identifier with an hashing algorithm
and a secret.
Signed-off-by: David Lebrun <david.lebrun@uclouvain.be>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch adds the necessary functions to compute and check the HMAC signature
of an SR-enabled packet. Two HMAC algorithms are supported: hmac(sha1) and
hmac(sha256).

In order to avoid dynamic memory allocation for each HMAC computation,
a per-cpu ring buffer is allocated for this purpose.

A new per-interface sysctl called seg6_require_hmac is added, allowing a
user-defined policy for processing HMAC-signed SR-enabled packets.
A value of -1 means that the HMAC field will always be ignored.
A value of 0 means that if an HMAC field is present, its validity will
be enforced (the packet is dropped is the signature is incorrect).
Finally, a value of 1 means that any SR-enabled packet that does not
contain an HMAC signature or whose signature is incorrect will be dropped.
Signed-off-by: David Lebrun <david.lebrun@uclouvain.be>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch creates a new type of interfaceless lightweight tunnel (SEG6),
enabling the encapsulation and injection of SRH within locally emitted
packets and forwarded packets.

>From a configuration viewpoint, a seg6 tunnel would be configured as follows:

  ip -6 ro ad fc00::1/128 encap seg6 mode encap segs fc42::1,fc42::2,fc42::3 dev eth0

Any packet whose destination address is fc00::1 would thus be encapsulated
within an outer IPv6 header containing the SRH with three segments, and would
actually be routed to the first segment of the list. If `mode inline' was
specified instead of `mode encap', then the SRH would be directly inserted
after the IPv6 header without outer encapsulation.

The inline mode is only available if CONFIG_IPV6_SEG6_INLINE is enabled. This
feature was made configurable because direct header insertion may break
several mechanisms such as PMTUD or IPSec AH.
Signed-off-by: David Lebrun <david.lebrun@uclouvain.be>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch adds the necessary hooks and structures to provide support
for SR-IPv6 control plane, essentially the Generic Netlink commands
that will be used for userspace control over the Segment Routing
kernel structures.

The genetlink commands provide control over two different structures:
tunnel source and HMAC data. The tunnel source is the source address
that will be used by default when encapsulating packets into an
outer IPv6 header + SRH. If the tunnel source is set to :: then an
address of the outgoing interface will be selected as the source.

The HMAC commands currently just return ENOTSUPP and will be implemented
in a future patch.
Signed-off-by: David Lebrun <david.lebrun@uclouvain.be>
Signed-off-by: David S. Miller <davem@davemloft.net>

Implement minimal support for processing of SR-enabled packets
as described in
https://tools.ietf.org/html/draft-ietf-6man-segment-routing-header-02.

This patch implements the following operations:
- Intermediate segment endpoint: incrementation of active segment and rerouting.
- Egress for SR-encapsulated packets: decapsulation of outer IPv6 header + SRH
  and routing of inner packet.
- Cleanup flag support for SR-inlined packets: removal of SRH if we are the
  penultimate segment endpoint.

A per-interface sysctl seg6_enabled is provided, to accept/deny SR-enabled
packets. Default is deny.

This patch does not provide support for HMAC-signed packets.
Signed-off-by: David Lebrun <david.lebrun@uclouvain.be>
Signed-off-by: David S. Miller <davem@davemloft.net>

The newly introduced mii_ethtool_get_link_ksettings function sets
lp_advertising to an uninitialized value when BMCR_ANENABLE is not
set:

drivers/net/mii.c: In function 'mii_ethtool_get_link_ksettings':
drivers/net/mii.c:224:2: error: 'lp_advertising' may be used uninitialized in this function [-Werror=maybe-uninitialized]

As documented in include/uapi/linux/ethtool.h, the value is
expected to be zero when we don't know it, so let's initialize
it to that.

Fixes: bc8ee596 ("net: mii: add generic function to support ksetting support")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

For single items being collected this should be preferred as being more
typesafe (as the compiler can check format string and to-be-written-to
variable match) and more efficient (requiring one less parameter to be
passed).
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Paul Durrant <paul.durrant@citrix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

There is some difference between force_igmp_version and force_mld_version.
Add document to make users aware of this.
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

recv_seq, send_seq and lns_mode mode are all defined as
unsigned int foo:1;
Signed-off-by: Asbjoern Sloth Toennesen <asbjorn@asbjorn.st>
Signed-off-by: David S. Miller <davem@davemloft.net>

These assignments follow this pattern:

	unsigned int foo:1;
	struct nlattr *nla = info->attrs[bar];

	if (nla)
		foo = nla_get_flag(nla); /* expands to: foo = !!nla */

This could be simplified to: if (nla) foo = 1;
but lets just remove the condition and use the macro,

	foo = nla_get_flag(nla);
Signed-off-by: Asbjoern Sloth Toennesen <asbjorn@asbjorn.st>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch causes the proper attribute flags to be set,
in the case that IPv6 UDP checksums are disabled, so that
userspace ie. `ip l2tp show tunnel` knows about it.
Signed-off-by: Asbjoern Sloth Toennesen <asbjorn@asbjorn.st>
Signed-off-by: David S. Miller <davem@davemloft.net>

Only set L2TP_ATTR_UDP_CSUM in l2tp_nl_tunnel_send()
when it's running over IPv4.

This prepares the code to also have IPv6 specific attributes.
Signed-off-by: Asbjoern Sloth Toennesen <asbjorn@asbjorn.st>
Signed-off-by: David S. Miller <davem@davemloft.net>

The attributes L2TP_ATTR_UDP_ZERO_CSUM6_RX and
L2TP_ATTR_UDP_ZERO_CSUM6_TX are used as flags,
but is defined as a u8 in a comment.

This patch redocuments them as flags.

Adding nla_policy entries would break API, so not doing that.

CC: Tom Herbert <therbert@google.com>
Signed-off-by: Asbjoern Sloth Toennesen <asbjorn@asbjorn.st>
Signed-off-by: David S. Miller <davem@davemloft.net>

Receiving a GSO packet in dev_gro_receive() is not uncommon
in stacked devices, or devices partially implementing LRO/GRO
like bnx2x. GRO is implementing the aggregation the device
was not able to do itself.

Current code causes reorders, like in following case :

For a given flow where sender sent 3 packets P1,P2,P3,P4

Receiver might receive P1 as a single packet, stored in GRO engine.

Then P2-P4 are received as a single GSO packet, immediately given to
upper stack, while P1 is held in GRO engine.

This patch will make sure P1 is given to upper stack, then P2-P4
immediately after.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Edward Cree says:

====================
sfc: enable 4-tuple UDP RSS hashing

EF10 based NICs have configurable RSS hash fields, and can be made to take the
ports into the hash on UDP (they already do so for TCP).  This patch series
enables this, in order to improve spreading of UDP traffic.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This improves UDP spreading, and also slightly improves GRO performance
of encapsulated TCP on 7000 series NICs.
Signed-off-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Saeed Mahameed says:

====================
Mellanox 100G SRIOV offloads tunnel_key set/release

From Hadar Hen Zion:

This series further enhances the SRIOV TC offloads of mlx5 to handle the
TC tunnel_key release and set actions.

This serves a common use-case in virtualization systems where the virtual
switch encapsulate packets (tunnel_key set action) sent from VMs with
outer headers corresponding to the local/remote host IPs and de-capsulate
(tunnel_key release) outer headers before the packets are received by the
VM.

We use the new E-Switch switchdev mode and TC tunnel_key set/release
action to achieve that also in SW defined SRIOV environments by
offloading TC rules that contain these actions along with forwarding
(TC mirred/redirect action) the packets.

The first six patches are adding the needed support in flow dissector,
flower and tc for offloading tunnel_key actions:
    - The first three patches are adding the needed help functions
      and enums
    - The next three patches in the series are adding UDP port attribute
      to tunnel_key release and set actions.

The addition of UDP ports would allow the HW driver to make sure they are
given (say) a VXLAN tunnel to offload (mlx5e uses that).

Patches 7-10 are mlx5 preparations for tunnel_key actions offloads support.

Patch #11 adds mlx5e support to offload tunnel_key release action, and the
last two patches (#12-13) add mlx5e support to tc tunnel_key set action.

Currently in order to offload tc tunnel_key release action, the tc rule
should be placed on top of the mlx5e offloading (uplink) interface instead
of the shared tunnel interface. The resolution between the tunnel interface
to the HW netdevice will be implemented in a follow up series.

This series was generated against commit
94edc86b ("Merge branch 'dwmac-sti-refactor-cleanup'")
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

In mlx5 HW, encapsulation is offloaded by the steering rule having
index into an encapsulation table containing the entire set of headers
to be added by the HW. The driver sets these headers in a buffer when we
are offloading the action.

The code maintains mlx5_encap_entry for each encap header it has
encountered when attempted to offload TC tunnel set action.

This entry maintains a linked list of all the flows sharing the same
encap header, when the last flow is removed from the list the encap
entry is removed.

The actual encap_header is allocated by the driver in the hardware only
if we have layer two neighbour info when the encap entry is created.
While the flow is in the driver, the driver holds a reference on the
neighbour.

When a new flow with encap action is inserted, the code first checks if
the required encap entry exists according to the tunnel set parameters.
If it does the encap is shared, otherwise a new mlx5_encap_entry is
created.

TC action parsing implementation in the driver assumes that tunnel set
action is provided in the same order set by the user, e.g before the
mirred_redirect action.
Signed-off-by: Hadar Hen Zion <hadarh@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

By implementing this ndo, the host stack will set the vxlan udp port
also to VF representor netdevices. This will allow the TC offload code
in the driver when it gets a tunnel key set action to identify the UDP
port as vxlan, and hence the rule will be a candidate for offloading.
Signed-off-by: Hadar Hen Zion <hadarh@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Enhance the parsing of offloaded TC rules to set HW matching on outer
(encapsulation) headers.
Parse TC tunnel release action and set it as mlx5 decap action when the
required capabilities are supported.
Signed-off-by: Hadar Hen Zion <hadarh@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

In order to support steering rules which add encapsulation headers,
encap_id parameter is needed.

Add new mlx5_flow_act struct which holds action related parameter:
action, flow_tag and encap_id. Use mlx5_flow_act struct when adding a new
steering rule.
This patch doesn't change any functionality.
Signed-off-by: Hadar Hen Zion <hadarh@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When creating flow tables, allow the caller to specify creation flags.
Currently no flags are used and as such this patch doesn't add any new
functionality.
Signed-off-by: Hadar Hen Zion <hadarh@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Instead of comparing to a const value, check the value of max encap
header size capability as reported by the Firmware.

Fixes: 575ddf58 ('net/mlx5: Introduce alloc_encap and dealloc_encap commands')
Signed-off-by: Hadar Hen Zion <hadarh@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The alloc and dealloc encap commands will be used in the mlx5e driver,
as such, declare them in a common header file.

Also, rename the functions: mlx5_cmd_{de}alloc_encap is replaced with
mlx5_encap_{de}alloc.
Signed-off-by: Hadar Hen Zion <hadarh@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The current tunnel set action supports only IP addresses and key
options. Add UDP dst port option.
Signed-off-by: Hadar Hen Zion <hadarh@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add dst port parameter to __ip_tun_set_dst and __ipv6_tun_set_dst
utility functions.
Signed-off-by: Hadar Hen Zion <hadarh@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The current IP tunneling classification supports only IP addresses and key.
Enhance UDP based IP tunneling classification parameters by adding UDP
src and dst port.
Signed-off-by: Hadar Hen Zion <hadarh@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When encapsulation field is set, mark it as used key for the flow
dissector. This will be used by offloading drivers.
Signed-off-by: Hadar Hen Zion <hadarh@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

New encapsulation keys were added to the flower classifier, which allow
classification according to outer (encapsulation) headers attributes
such as key and IP addresses.
In order to expose those attributes outside flower, add
corresponding enums in the flow dissector.
Signed-off-by: Hadar Hen Zion <hadarh@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Needed for drivers to pick the relevant action when offloading tunnel
key act.
Signed-off-by: Hadar Hen Zion <hadarh@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Without this check, it is not possible to create two rules that
are identical except for their UID ranges. For example:

root@net-test:/# ip rule add prio 1000 lookup 300
root@net-test:/# ip rule add prio 1000 uidrange 100-200 lookup 300
RTNETLINK answers: File exists
root@net-test:/# ip rule add prio 1000 uidrange 100-199 lookup 100
root@net-test:/# ip rule add prio 1000 uidrange 200-299 lookup 200
root@net-test:/# ip rule add prio 1000 uidrange 300-399 lookup 100
RTNETLINK answers: File exists

Tested: https://android-review.googlesource.com/#/c/299980/Signed-off-by: Lorenzo Colitti <lorenzo@google.com>
Acked-by: Maciej Żenczykowski <maze@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Driver uses a union for copying data to & from management firmware
when interacting with it.
Problem is that the function always copies sizeof(union) while commit
2edbff8d ("qed: Learn resources from management firmware") is casting
a union elements which is of smaller size [24-byte instead of 88-bytes].

Also, the union contains some inappropriate elements which increase its
size [should have been 32-bytes]. While this shouldn't corrupt other
PF messages to the MFW [as management firmware enforces permissions so
that each PF is allowed to write only to its own mailbox] we fix this
here as well.

Fixes: 2edbff8d ("qed: Learn resources from management firmware")
Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When moving from typhoon_get_settings to typhoon_getlink_ksettings
in the commit f7a5537c ("net: 3com: typhoon: use new api
ethtool_{get|set}_link_ksettings"), we use a local variable supported
but we forgot to update the struct ethtool_link_ksettings with
this value.

We also initialize advertising to zero, because otherwise it may
be uninitialized if no case of the switch (tp->xcvr_select) is used.
Signed-off-by: Philippe Reynes <tremyfr@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The ethtool api {get|set}_settings is deprecated.
We move this driver to new api {get|set}_link_ksettings.
Signed-off-by: Philippe Reynes <tremyfr@gmail.com>
Acked-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The ethtool api {get|set}_settings is deprecated.
We move this driver to new api {get|set}_link_ksettings.
Signed-off-by: Philippe Reynes <tremyfr@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The ethtool api {get|set}_settings is deprecated.
We move this driver to new api {get|set}_link_ksettings.
Signed-off-by: Philippe Reynes <tremyfr@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>