- 09 Oct, 2007 26 commits
-
-
J. Bruce Fields authored
Without this we always return 2^32-1 as the the maximum namelength. Thanks to Andreas Gruenbacher for bug report and testing. Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu> Cc: Andreas Gruenbacher <agruen@suse.de>
-
J. Bruce Fields authored
It's not enough to take a reference on the delegation object itself; we need to ensure that the rpc_client won't go away just as we're about to make an rpc call. Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
-
J. Bruce Fields authored
If a callback still holds a reference on the client, then it may be about to perform an rpc call, so it isn't safe to call rpc_shutdown(). (Though rpc_shutdown() does wait for any outstanding rpc's, it can't know if a new rpc is about to be issued with that client.) So, wait to shutdown the rpc_client until the reference count on the client has gone to zero. Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
-
J. Bruce Fields authored
Currently there's a race that can cause an oops in generic_setlease. (In detail: nfsd, when it removes a lease, does so by calling vfs_setlease() with F_UNLCK and a pointer to the fl_flock field, which in turn points to nfsd's existing lease; but the first thing the setlease code does is call time_out_leases(). If the lease happens to already be beyond the lease break time, that will free the lease and (in nfsd's release_private callback) set fl_flock to NULL, leading to a NULL deference soon after in vfs_setlease().) There are probably other things to fix here too, but it seems inherently racy to allow either locks.c or nfsd to time out this lease. Instead just set the fl_break_time to 0 (preventing locks.c from ever timing out this lock) and leave it up to nfsd's laundromat thread to deal with it. Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
-
Dr. David Alan Gilbert authored
This patch adds the address of the client that caused an error in sunrpc/svc.c so that you get errors that look like: svc: 192.168.66.28, port=709: unknown version (3 for prog 100003, nfsd) I've seen machines which get bunches of unknown version or similar errors from time to time, and while the recent patch to add the service helps to find which service has the wrong version it doesn't help find the potentially bad client. The patch is against a checkout of Linus's git tree made on 2007-08-24. One observation is that the svc_print_addr function prints to a buffer which in this case makes life a little more complex; it just feels as if there must be lots of places that print a connection address - is there a better function to use anywhere? I think actually there are a few places with semi duplicated code; e.g. one_sock_name switches on the address family but only currently has IPV4; I wonder how many other places are similar. Signed-off-by: Dave Gilbert <linux@treblig.org> Cc: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu> Acked-by: Neil Brown <neilb@suse.de>
-
Peter Staubach authored
Modify the NFS server code to support 64 bit ino's, as appropriate for the system and the NFS protocol version. The gist of the changes is to query the underlying file system for attributes and not just to use the cached attributes in the inode. For this specific purpose, the inode only contains an ino field which unsigned long, which is large enough on 64 bit platforms, but is not large enough on 32 bit platforms. I haven't been able to find any reason why ->getattr can't be called while i_mutex. The specification indicates that i_mutex is not required to be held in order to invoke ->getattr, but it doesn't say that i_mutex can't be held while invoking ->getattr. I also haven't come to any conclusions regarding the value of lease_get_mtime() and whether it should or should not be invoked by fill_post_wcc() too. I chose not to change this because I thought that it was safer to leave well enough alone. If we decide to make a change, it can be done separately. Signed-off-by: Peter Staubach <staubach@redhat.com> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu> Acked-by: Neil Brown <neilb@suse.de>
-
J. Bruce Fields authored
We've let svcauth_gss_accept() get much too long and hairy. The RPC_GSS_PROC_INIT and RPC_GSS_PROC_CONTINUE_INIT cases share very little with the other cases, so it's very natural to split them off into a separate function. This will also nicely isolate the piece of code we need to parametrize to authenticating gss-protected NFSv4 callbacks on behalf of the NFS client. Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu> Acked-by: Neil Brown <neilb@suse.de>
-
J. Bruce Fields authored
Each branch of this if-then-else has a bunch of duplicated code that we could just put at the end. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu> Acked-by: Neil Brown <neilb@suse.de>
-
Andrew Morton authored
fs/nfsd/nfsctl.c: In function 'write_filehandle': fs/nfsd/nfsctl.c:301: warning: 'maxsize' may be used uninitialized in this function Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu> Acked-by: Neil Brown <neilb@suse.de>
-
J. Bruce Fields authored
It doesn't make sense to make the callback with credentials that the client made the setclientid with. Instead the spec requires that the callback occur with the credentials the client authenticated *to*. It probably doesn't matter what we use for auth_unix, and some more infrastructure will be needed for auth_gss, so let's just remove the cred lookup for now. Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu> Acked-by: Neil Brown <neilb@suse.de>
-
J. Bruce Fields authored
We have some slabs that the nfs4 server uses to store state objects. We're currently creating and destroying those slabs whenever the server is brought up or down. That seems excessive; may as well just do that in module initialization and exit. Also add some minor header cleanup. (Thanks to Andrew Morton for that and a compile fix.) Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu> Acked-by: Neil Brown <neilb@suse.de>
-
J. Bruce Fields authored
We want to allow gss on the callback channel, so people using krb5 can still get the benefits of delegations. But looking up the rpc credential can take some time in that case. And we shouldn't delay the response to setclientid_confirm while we wait. It may be inefficient, but for now the simplest solution is just to spawn a new thread as necessary for the purpose. (Thanks to Adrian Bunk for catching a missing static here.) Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu> Cc: Adrian Bunk <bunk@kernel.org>
-
J. Bruce Fields authored
Note that qword_get() returns length or -1, not an -ERROR. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu> Acked-by: Neil Brown <neilb@suse.de>
-
J. Bruce Fields authored
To quote a recent mail from Andrew Morton: Look: if there's a way in which an unprivileged user can trigger a printk we fix it, end of story. OK. I assume that goes double for printk()s that might be triggered by random hosts on the internet. So, disable some printk()s that look like they could be triggered by malfunctioning or malicious clients. For now, just downgrade them to dprintk()s. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu> Acked-by: Neil Brown <neilb@suse.de>
-
J. Bruce Fields authored
Benny Halevy suggested renaming cmp_* to same_* to make the meaning of the return value clearer. Fix some nearby style deviations while we're at it, including a small swath of creative indentation in nfs4_preprocess_seqid_op(). Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu> Acked-by: Neil Brown <neilb@suse.de>
-
J. Bruce Fields authored
I moved this check into map_new_errors, but forgot to delete the original. Oops. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu> Acked-by: Neil Brown <neilb@suse.de>
-
Christoph Hellwig authored
Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu> Acked-by: Neil Brown <neilb@suse.de>
-
J. Bruce Fields authored
This macro is unused. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu> Acked-by: Neil Brown <neilb@suse.de>
-
J. Bruce Fields authored
The nfserr_dropit happens routinely on upcalls (so a kmalloc failure is almost never the actual cause), but I occasionally get a complant from some tester that's worried because they ran across this message after turning on debugging to research some unrelated problem. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu> Acked-by: Neil Brown <neilb@suse.de>
-
Linus Torvalds authored
-
git://ftp.linux-mips.org/pub/scm/upstream-linusLinus Torvalds authored
* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus: [MIPS] Au1000: set the PCI controller IO base [MIPS] Alchemy: Fix USB initialization. [MIPS] IP32: Fix fatal typo in address computation.
-
Trond Myklebust authored
The recent fix for a circular lock dependency unfortunately introduced a potential memory leak in the event where the call to nlmsvc_lookup_host fails for some reason. Thanks to Roel Kluin for spotting this. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Jeff Garzik authored
The recent mv_fill_sg() rewrite, to fix a data corruption problem related to IOMMU virtual merging, forgot to account for the potentially-increased size of the scatter/gather table after its run. Additionally, the DMA boundary is reduced from 0xffffffff to 0xffff to more closely match the needs of mv_fill_sg(). Signed-off-by: Jeff Garzik <jgarzik@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Florian Fainelli authored
The PCI controller IO base was not set in the au1000 pci code. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John Crispin <blogic@openwrt.org> Signed-off-by: Florian Fainelli <florian.fainelli@telecomint.eu> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
-
Florian Fainelli authored
This patch fixes a wrong ifdef in the board setup code, leading to the GPIO pin not being pulled high, and thus the USB switch not being powered at all. This finishes the rename of CONFIG_USB_OHCI to CONFIG_USB_OHCI_HCD, which started in 2005 (before 2.6.12-rc2), then probably because things were working anyway for most people got forgotten. [Ralf: Paolo's original patch didn't fix the module case, Florian's patch only fixed MTX1 etc. so this is a combined patch plus some cleanups.] Cc: Giuseppe Patanè <giuseppe.patane@tvblob.com> Cc: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John Crispin <blogic@openwrt.org> Signed-off-by: Florian Fainelli <florian.fainelli@telecomint.eu> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
-
Giuseppe Sacco authored
Signed-off-by: Giuseppe Sacco <eppesuig@debian.org> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
-
- 08 Oct, 2007 11 commits
-
-
Maarten Bressers authored
When building a custom keymap, after setting GENERATE_KEYMAP := 1 in drivers/char/Makefile, the kernel build fails like this: CC drivers/char/vt.o make[2]: *** No rule to make target `drivers/char/%.map', needed by `drivers/char/defkeymap.c'. Stop. make[1]: *** [drivers/char] Error 2 make: *** [drivers] Error 2 This was caused by commit af8b1287, which deleted a necessary colon from the Makefile rule that generates the keymap, since that rule contains both a target and a target-pattern. The following patch puts the colon back: Signed-off-by: Maarten Bressers <mbres@gentoo.org> Cc: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Karsten Keil authored
Fix against access random data bytes outside the dev->chanmap array. Thanks to Oliver Neukum for pointing me to this issue. Signed-off-by: Karsten Keil <kkeil@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Linus Torvalds authored
* 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6: [IPv6]: Fix ICMPv6 redirect handling with target multicast address [PKT_SCHED] cls_u32: error code isn't been propogated properly [ROSE]: Fix rose.ko oops on unload [TCP]: Fix fastpath_cnt_hint when GSO skb is partially ACKed
-
Yan Zheng authored
When IOCB_FLAG_RESFD flag is set and iocb->aio_resfd is incorrect, statement 'goto out_put_req' is executed. At label 'out_put_req', aio_put_req(..) is called, which requires 'req->ki_filp' set. Signed-off-by: Yan Zheng<yanzheng@21cn.com> Cc: Zach Brown <zach.brown@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Yan Zheng authored
find_lock_page increases page's usage count, we should decrease it before return VM_FAULT_SIGBUS Signed-off-by: Yan Zheng<yanzheng@21cn.com> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Yan Zheng authored
The test for VM_CAN_NONLINEAR always fails Signed-off-by: Yan Zheng<yanzheng@21cn.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Peter Zijlstra authored
All the current page_mkwrite() implementations also set the page dirty. Which results in the set_page_dirty_balance() call to _not_ call balance, because the page is already found dirty. This allows us to dirty a _lot_ of pages without ever hitting balance_dirty_pages(). Not good (tm). Force a balance call if ->page_mkwrite() was successful. Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Brian Haley authored
When the ICMPv6 Target address is multicast, Linux processes the redirect instead of dropping it. The problem is in this code in ndisc_redirect_rcv(): if (ipv6_addr_equal(dest, target)) { on_link = 1; } else if (!(ipv6_addr_type(target) & IPV6_ADDR_LINKLOCAL)) { ND_PRINTK2(KERN_WARNING "ICMPv6 Redirect: target address is not link-local.\n"); return; } This second check will succeed if the Target address is, for example, FF02::1 because it has link-local scope. Instead, it should be checking if it's a unicast link-local address, as stated in RFC 2461/4861 Section 8.1: - The ICMP Target Address is either a link-local address (when redirected to a router) or the same as the ICMP Destination Address (when redirected to the on-link destination). I know this doesn't explicitly say unicast link-local address, but it's implied. This bug is preventing Linux kernels from achieving IPv6 Logo Phase II certification because of a recent error that was found in the TAHI test suite - Neighbor Disovery suite test 206 (v6LC.2.3.6_G) had the multicast address in the Destination field instead of Target field, so we were passing the test. This won't be the case anymore. The patch below fixes this problem, and also fixes ndisc_send_redirect() to not send an invalid redirect with a multicast address in the Target field. I re-ran the TAHI Neighbor Discovery section to make sure Linux passes all 245 tests now. Signed-off-by: Brian Haley <brian.haley@hp.com> Acked-by: David L Stevens <dlstevens@us.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Stephen Hemminger authored
Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Alexey Dobriyan authored
Commit a3d38402 aka "[AX.25]: Fix unchecked rose_add_loopback_neigh uses" transformed rose_loopback_neigh var into statically allocated one. However, on unload it will be kfree's which can't work. Steps to reproduce: modprobe rose rmmod rose BUG: unable to handle kernel NULL pointer dereference at virtual address 00000008 printing eip: c014c664 *pde = 00000000 Oops: 0000 [#1] PREEMPT DEBUG_PAGEALLOC Modules linked in: rose ax25 fan ufs loop usbhid rtc snd_intel8x0 snd_ac97_codec ehci_hcd ac97_bus uhci_hcd thermal usbcore button processor evdev sr_mod cdrom CPU: 0 EIP: 0060:[<c014c664>] Not tainted VLI EFLAGS: 00210086 (2.6.23-rc9 #3) EIP is at kfree+0x48/0xa1 eax: 00000556 ebx: c1734aa0 ecx: f6a5e000 edx: f7082000 esi: 00000000 edi: f9a55d20 ebp: 00200287 esp: f6a5ef28 ds: 007b es: 007b fs: 0000 gs: 0033 ss: 0068 Process rmmod (pid: 1823, ti=f6a5e000 task=f7082000 task.ti=f6a5e000) Stack: f9a55d20 f9a5200c 00000000 00000000 00000000 f6a5e000 f9a5200c f9a55a00 00000000 bf818cf0 f9a51f3f f9a55a00 00000000 c0132c60 65736f72 00000000 f69f9630 f69f9528 c014244a f6a4e900 00200246 f7082000 c01025e6 00000000 Call Trace: [<f9a5200c>] rose_rt_free+0x1d/0x49 [rose] [<f9a5200c>] rose_rt_free+0x1d/0x49 [rose] [<f9a51f3f>] rose_exit+0x4c/0xd5 [rose] [<c0132c60>] sys_delete_module+0x15e/0x186 [<c014244a>] remove_vma+0x40/0x45 [<c01025e6>] sysenter_past_esp+0x8f/0x99 [<c012bacf>] trace_hardirqs_on+0x118/0x13b [<c01025b6>] sysenter_past_esp+0x5f/0x99 ======================= Code: 05 03 1d 80 db 5b c0 8b 03 25 00 40 02 00 3d 00 40 02 00 75 03 8b 5b 0c 8b 73 10 8b 44 24 18 89 44 24 04 9c 5d fa e8 77 df fd ff <8b> 56 08 89 f8 e8 84 f4 fd ff e8 bd 32 06 00 3b 5c 86 60 75 0f EIP: [<c014c664>] kfree+0x48/0xa1 SS:ESP 0068:f6a5ef28 Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Ilpo Järvinen authored
When only GSO skb was partially ACKed, no hints are reset, therefore fastpath_cnt_hint must be tweaked too or else it can corrupt fackets_out. The corruption to occur, one must have non-trivial ACK/SACK sequence, so this bug is not very often that harmful. There's a fackets_out state reset in TCP because fackets_out is known to be inaccurate and that fixes the issue eventually anyway. In case there was also at least one skb that got fully ACKed, the fastpath_skb_hint is set to NULL which causes a recount for fastpath_cnt_hint (the old value won't be accessed anymore), thus it can safely be decremented without additional checking. Reported by Cedric Le Goater <clg@fr.ibm.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 07 Oct, 2007 3 commits
-
-
Dmitry Torokhov authored
We should only reparent to a class former class devices that form the base of class hierarchy. Nested devices should still grow from their real parents. Signed-off-by: Dmitry Torokhov <dtor@mail.ru> Tested-by: Andrey Borzenkov <arvidjaar@mail.ru> Tested-by: Anssi Hannula <anssi.hannula@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6Linus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6: firewire: point to migration document
-
Attila Kinali authored
Add the manufacturer and card id of teltonica pcmcia modems to serial_cs.c Signed-off-by: Attila Kinali <attila@kinali.ch> Acked-by: Alan Cox <alan@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-