- 25 Mar, 2024 28 commits
-
-
Ayala Beker authored
In order to activate a link that is currently inactive due to a negotiated TTLM request, need to first tear down the negotiated TTLM request. Add support for sending TTLM teardown request and update the links state accordingly. Signed-off-by:
Ayala Beker <ayala.beker@intel.com> Reviewed-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240318184907.d480cbf46fcf.Idedad472469d2c27dd2a088cf80a13a1e1cf9b78@changeidSigned-off-by:
-
Benjamin Berg authored
If a non-TX BSS is included in a per-STA profile, then we cannot set transmitted_bss for it. Even worse, if we do things properly we should be configuring both bssid_index and max_bssid_indicator correctly. We do not actually have both pieces of information (and, some APs currently do not include either). So, ignore any per-STA profile where the RNR says that the BSS is not transmitted. Also fix transmitted_bss to never be set for per-STA profiles. This fixes issues where mac80211 was setting the reference BSSID to an incorrect value. Fixes: 2481b5da ("wifi: cfg80211: handle BSS data contained in ML probe responses") Signed-off-by:
Benjamin Berg <benjamin.berg@intel.com> Reviewed-by:
-
Benjamin Berg authored
Add a verification that the BSSID Index does not exceed the maximum number of BSSIDs in the Multiple-BSSID set. Signed-off-by:
-
Benjamin Berg authored
There is no reason to check the request flags for each of the links, so pull that out of the loop. Also, within the loop we can set the per-link error everywhere. Signed-off-by:
-
Johannes Berg authored
Some devices may not be capable of handling puncturing in 5 GHz only (vs. the current flag that just removes puncturing support completely). Add a flag to support such devices: check and then downgrade the channel width if needed. Signed-off-by:
-
Anjaneyulu authored
Mark Indoor LPI and Indoor AFC power types as valid based on channel flags. While on it, added default case. Signed-off-by:
Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com> Signed-off-by:
-
Anjaneyulu authored
Update power_type in bss_conf based on Indoor AFC and LPI power types received in HE 6 GHz operation element on assoc success. Signed-off-by:
-
Ayala Beker authored
BSS_CHANGED_MLD_TTLM purpose is to let the driver know that negotiated TTLM was updated and as a result MLD suspended links status was change. Fix the description to better reflect it. Signed-off-by:
Ilan Peer <ilan.peer@intel.com> Signed-off-by:
-
Johannes Berg authored
Since I keep getting confused about this and asking about it, update the documentation. In the future, especially when we add more reasons for a link to be disabled, we should add a per-link 'disable state' bitmap instead of maintaining all these bitmaps with subset logic, to indicate each of the different states separately. Signed-off-by:
-
Johannes Berg authored
Initially, we were only using this for non-MLO, but it could also be useful for MLO, and if we move it to per-link and the vif isn't an MLD, it'll be put in the same place (by mac80211) anyway. Move it to be per link. Signed-off-by:
-
Johannes Berg authored
If there was a possibility of an MLE basic STA profile without subelements, we might reject it because we account for the one octet for sta_info_len twice (it's part of itself, and in the fixed portion). Like in ieee80211_mle_reconf_sta_prof_size_ok, subtract 1 to adjust that. When reading the elements we did take this into account, and since there are always elements, this never really mattered. Fixes: 7b6f0877 ("wifi: ieee80211: Support validating ML station profile length") Signed-off-by:
-
Johannes Berg authored
For simplicity, we may want to pass a NULL element, and while we should then pass also a zero length, just be a bit more careful here. Signed-off-by:
-
Aditya Kumar Singh authored
Currently link ID information is not passed to mac80211 via Rx status by mac80211_hwsim. This leads to packet getting dropped in function __ieee80211_rx_handle_packet since it expects the link ID if packet is intended for a MLO station and the station is not directly passed via pubsta function argument. Add changes to pass the link ID information in Rx status. Signed-off-by:
Aditya Kumar Singh <quic_adisi@quicinc.com> Reviewed-by:
Jeff Johnson <quic_jjohnson@quicinc.com> Link: https://msgid.link/20240313145402.456514-1-quic_adisi@quicinc.comSigned-off-by:
-
Jeff Johnson authored
Fix all of the kernel-doc issues in nl80211.h. Signed-off-by:
-
Jeff Johnson authored
Currently kernel-doc raises "warning: bad line:" for several comments that have invalid multi-line comment style; they are missing the leading '*'. And checkpatch.pl raises "WARNING: please, no space before tabs" for a large number of comments which have space then tab after the leading '*'. Fix those issues. Signed-off-by:
-
Jeff Johnson authored
kernel-doc flagged the following issue: include/uapi/linux/nl80211.h:6081: warning: expecting prototype for enum nl80211_plink_action. Prototype was for enum plink_actions instead This is because the documentation doesn't match the code. Normally the correct fix for such an issue is to modify the documentation to match the code. However, in this case, since the actual name plink_actions is not referenced by any code, rename it to nl80211_plink_action to give it a proper prefix and match the documentation. Signed-off-by:
-
Johannes Berg authored
Clean up the code here a bit to have only a single call to ieee80211_chandef_he_6ghz_oper() by using a local pointer variable for the difference. Link: https://msgid.link/20240312112048.94c421d767f9.Ia7ca2f315b392c74d39b44fa9eb872a2e62e75c1@changeidSigned-off-by:
-
Kang Yang authored
Current mac80211 won't parsing puncturing bitmap when process EHT Operation element in 6 GHz band or Bandwidth Indication element. This leads to puncturing bitmap cannot be updated in related situations, such as connecting to an EHT AP in 6 GHz band. So supplement parsing of puncturing bitmap for these elements. Signed-off-by:
Kang Yang <quic_kangyang@quicinc.com> Link: https://msgid.link/20240312045947.576231-2-quic_kangyang@quicinc.comSigned-off-by:
-
Johannes Berg authored
There's a duplicate entry for 0x51f1, which shouldn't be present, though the first entry will correctly be taken. Remove the second one. Signed-off-by:
Mukesh Sisodiya <mukesh.sisodiya@intel.com> Signed-off-by:
-
Ilan Peer authored
To support staring internal scan, refactor the scan code such that the body iwl_mvm_reg_scan_start() is now moved to a local function that can be used by other flows as well. Signed-off-by:
-
Johannes Berg authored
The firmware has handled quiet in CSA for a long time now, but it didn't really matter much. However, now with quiet CSA on a perhaps secondary link, we don't want mac80211 to stop queues, we can continue using a link that's not requiring quiet. Set the feature flag for MLO-capable devices indicating that we'll handle the quiet entirely in the driver/device. However, the firmware doesn't handle quiet in AP mode since we don't really expect to really be needing that (without radar detection), but - even for testing - make that work properly by simply not pulling from TXQs in this scenario. Signed-off-by:
-
Johannes Berg authored
If, for any reason, we're going to attempt to flush the queues while quiet CSA is happening, this cannot succeed. This could be the case if for example mac80211 were to flush after TXing e.g. a deauth frame due to disconnecting during the CSA. In this case, drop the frames instead, the firmware won't let us do any transmissions and may also become unhappy if we're not going to disconnect quickly enough. Currently this doesn't happen as mac80211 stops queues, but we'll want to let mac80211 know not to stop queues for proper multi-link support during CSA, so we need to handle this case. Signed-off-by:
-
Shaul Triebitz authored
In version 4, in case of MLO GTK rekey during D3, the firmware sends all the new keys, including the keys on the non-active links. Update also the non active link keys. Signed-off-by:
Shaul Triebitz <shaul.triebitz@intel.com> Reviewed-by:
-
Shaul Triebitz authored
When waking up from wowlan, we iterate over the current keys and remove those that were rekeyed. With MLO, there might be keys of other links which should not be removed. Skip MLO keys on other links (other than the wowlan active link). Signed-off-by:
-
Shaul Triebitz authored
In MLO, the station id in d3 can be other than 0. Do not assume the station id is 0 when waking up from d3. Signed-off-by:
-
Shaul Triebitz authored
With MLO, the station id in wowlan can be other than 0. Set the correct station in the protocol offload command. Signed-off-by:
-
Ilan Peer authored
As the FW statistics are per link context and not per MAC context. Signed-off-by:
-
Shaul Triebitz authored
Fix the comment of the associated struct of the wowlan info notification. Signed-off-by:
-
- 21 Mar, 2024 4 commits
-
-
Breno Leitao authored
Embedding net_device into structures prohibits the usage of flexible arrays in the net_device structure. For more details, see the discussion at [1]. Un-embed the net_device from struct qtnf_bus by converting it into a pointer. Then use the leverage alloc_netdev() to allocate the net_device object at qtnf_pcie_probe(). The free of the device occurs at qtnf_pcie_remove(). [1] https://lore.kernel.org/all/20240229225910.79e224cf@kernel.org/Signed-off-by:
Breno Leitao <leitao@debian.org> Signed-off-by:
Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240319172634.894327-1-leitao@debian.org
-
Lorenzo Bianconi authored
Fix the following sparse warnings: drivers/net/wireless/mediatek/mt76/mt7915/debugfs.c:1133:29: error: too long token expansion drivers/net/wireless/mediatek/mt76/mt7915/debugfs.c:1133:29: error: too long token expansion drivers/net/wireless/mediatek/mt76/mt7915/debugfs.c:1133:29: error: too long token expansion drivers/net/wireless/mediatek/mt76/mt7915/debugfs.c:1133:29: error: too long token expansion No functional changes, compile tested only. Fixes: e3296759 ("wifi: mt76: mt7915: enable per bandwidth power limit support") Signed-off-by:
Lorenzo Bianconi <lorenzo@kernel.org> Acked-by:
Felix Fietkau <nbd@nbd.name> Signed-off-by:
-
Li Zhijian authored
Per filesystems/sysfs.rst, show() should only use sysfs_emit() or sysfs_emit_at() when formatting the value to be returned to user space. coccinelle complains that there are still a couple of functions that use snprintf(). Convert them to sysfs_emit(). sprintf() will be converted as weel if they have. Generally, this patch is generated by make coccicheck M=<path/to/file> MODE=patch \ COCCI=scripts/coccinelle/api/device_attr_show.cocci No functional change intended CC: Kalle Valo <kvalo@kernel.org> CC: linux-wireless@vger.kernel.org Signed-off-by:
Li Zhijian <lizhijian@fujitsu.com> Signed-off-by:
-
Li Zhijian authored
Per filesystems/sysfs.rst, show() should only use sysfs_emit() or sysfs_emit_at() when formatting the value to be returned to user space. coccinelle complains that there are still a couple of functions that use snprintf(). Convert them to sysfs_emit(). sprintf() will be converted as weel if they have. Generally, this patch is generated by make coccicheck M=<path/to/file> MODE=patch \ COCCI=scripts/coccinelle/api/device_attr_show.cocci No functional change intended CC: Larry Finger <Larry.Finger@lwfinger.net> CC: Kalle Valo <kvalo@kernel.org> CC: linux-wireless@vger.kernel.org CC: b43-dev@lists.infradead.org Acked-by:
Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by:
-
- 18 Mar, 2024 1 commit
-
-
Víctor Gonzalo authored
The module metadata for the firmware file mrvl/sd8801_uapsta.bin is missing. Signed-off-by:
Víctor Gonzalo <victor.gonzalo@anddroptable.net> Acked-by:
Brian Norris <briannorris@chromium.org> Signed-off-by:
-
- 14 Mar, 2024 7 commits
-
-
Fiona Klute authored
This driver uses the new rtw8703b chip driver code. Acked-by:
Ping-Ke Shih <pkshih@realtek.com> Acked-by: Ulf Hansson <ulf.hansson@linaro.org> # For SDIO Tested-by:
Pavel Machek <pavel@ucw.cz> Signed-off-by:
Fiona Klute <fiona.klute@gmx.de> Signed-off-by:
-
Fiona Klute authored
Sometimes 8703b firmware is still active from previous use when the driver needs to download the firmware during MAC activation. Reset it in that case. Acked-by:
-
Fiona Klute authored
Initialization tables for rtw8703b: Initial register values and TX power limits. Acked-by:
-
Fiona Klute authored
Initialization table definitions for rtw8703b. Acked-by:
-
Fiona Klute authored
This is the main source for the new rtw88_8703b chip driver. Acked-by:
-
Fiona Klute authored
This is the main header for the new rtw88_8703b chip driver. Acked-by:
-
Fiona Klute authored
default_cck_index is used in power track, the rx_cck_agc_report_type for RX PHY status. GET_RX_DESC_BW is an RX descriptor field not used by the other chip drivers. Acked-by:
-
