several command completion handlers are passed the event trb
as a paramtere even if it't not used.
Remove it.
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20210129130044.206855-5-mathias.nyman@linux.intel.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Instead of passing slot id and endpoint index to
cleanup_halted_endpoint() pass the endpoint structure pointer
as it's already known.

Avoids again digging out the endpoint structure based on
slot id and endpoint index, and passing them along the
call chain for this purpose only.

Add slot_id to the virt_dev structure so that it
can easily be found from a virt_dev, or its child, the
virt_ep endpoint structure.
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20210129130044.206855-4-mathias.nyman@linux.intel.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

isochronous endpoints do not support streams, meaning that
there is only one ring per endpoint.

Avoid double-fetching the transfer event DMA to get the
ring. Also makes passing the event to skip_isoc_td() uncecessary.
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20210129130044.206855-3-mathias.nyman@linux.intel.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

When handling transfer events the event is passed along the handling
callpath and parsed again in several occasions.

The event contains slot_id and endpoint index, from which the driver
endpoint structure can be found. There wasn't however a way to get the
endpoint index or parent usb device from this endpoint structure.

A lot of extra event parsing, and thus some DMA doublefetch cases,
and excess variables and code can be avoided by adding endpoint index
and parent usb virt device pointer to the endpoint structure.
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20210129130044.206855-2-mathias.nyman@linux.intel.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

With some USB network adapters, such as DM96xx, the following message
is seen for each maximum size receive packet.

dwc2 ff540000.usb: dwc2_update_urb_state(): trimming xfer length

This happens because the packet size requested by the driver is 1522
bytes, wMaxPacketSize is 64, the dwc2 driver configures the chip to
receive 24*64 = 1536 bytes, and the chip does indeed send more than
1522 bytes of data. Since the event does not indicate an error condition,
the message is just noise. Demote it to debug level.

Fixes: 7359d482 ("staging: HCD files for the DWC2 driver")
Tested-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Link: https://lore.kernel.org/r/20210113112052.17063-4-nsaenzjulienne@suse.deSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

In some situations, the following error messages are reported.

dwc2 ff540000.usb: dwc2_hc_chhltd_intr_dma: Channel 1 - ChHltd set, but reason is unknown
dwc2 ff540000.usb: hcint 0x00000002, intsts 0x04000021

This is sometimes followed by:

dwc2 ff540000.usb: dwc2_update_urb_state_abn(): trimming xfer length

and then:

WARNING: CPU: 0 PID: 0 at kernel/v4.19/drivers/usb/dwc2/hcd.c:2913
			dwc2_assign_and_init_hc+0x98c/0x990

The warning suggests that an odd buffer address is to be used for DMA.

After an error is observed, the receive buffer may be full
(urb->actual_length >= urb->length). However, the urb is still left in
the queue unless three errors were observed in a row. When it is queued
again, the dwc2 hcd code translates this into a 1-block transfer.
If urb->actual_length (ie the total expected receive length) is not
DMA-aligned, the buffer pointer programmed into the chip will be
unaligned. This results in the observed warning.

To solve the problem, abort input transactions after an error with
unknown cause if the entire packet was already received. This may be
a bit drastic, but we don't really know why the transfer was aborted
even though the entire packet was received. Aborting the transfer in
this situation is less risky than accepting a potentially corrupted
packet.

With this patch in place, the 'ChHltd set' and 'trimming xfer length'
messages are still observed, but there are no more transfer attempts
with odd buffer addresses.

Fixes: 151d0cbd ("usb: dwc2: make the scheduler handle excessive NAKs better")
Cc: Boris ARZUR <boris@konbu.org>
Cc: Douglas Anderson <dianders@chromium.org>
Tested-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Link: https://lore.kernel.org/r/20210113112052.17063-3-nsaenzjulienne@suse.deSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The DWC2 documentation states that transfers with zero data length should
set the number of packets to 1 and the transfer length to 0. This is not
currently the case for inbound transfers: the transfer length is set to
the maximum packet length. This can have adverse effects if the chip
actually does transfer data as it is programmed to do. Follow chip
documentation and keep the transfer length set to 0 in that situation.

Fixes: 56f5b1cf ("staging: Core files for the DWC2 driver")
Tested-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Link: https://lore.kernel.org/r/20210113112052.17063-2-nsaenzjulienne@suse.deSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Trivial example fix.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Link: https://lore.kernel.org/r/8fa5edcaa6b93859cfda97d080aad378e89c1b44.1611232967.git.michal.simek@xilinx.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Update Raw Gadget documentation and Kconfig. Make the description more
precise and clear, fix typos and grammar mistakes, and do other cleanups.
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Link: https://lore.kernel.org/r/f4c650c94ae2b910e38819d51109cd5f0b251a2a.1611429174.git.andreyknvl@google.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Add copyright to drivers/usb/gadget/legacy/raw_gadget.c.
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Link: https://lore.kernel.org/r/c8937266c4a5da073ac81cd471b18d869c984dfe.1611429174.git.andreyknvl@google.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Tasklets have long been deprecated as being too heavy on the system
by running in irq context - and this is not a performance critical
path. If a higher priority process wants to run, it must wait for
the tasklet to finish before doing so.

c67x00_do_work() will now run in process context and have further
concurrency (tasklets being serialized among themselves), but this
is done holding the c67x00->lock, so it should be fine. Furthermore,
this patch fixes the usage of the lock in the callback as otherwise
it would need to be irq-safe.
Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Link: https://lore.kernel.org/r/20210113031537.79859-1-dave@stgolabs.netSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Add terminating '\n' to the formats where missed.
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Junlin Yang <yangjunlin@yulong.com>
Link: https://lore.kernel.org/r/20210124143947.1688-1-angkery@163.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

PTR_ERR(chip->tcpci) has been used as a return value,
it is not necessary to assign it to ret, so remove it.
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Junlin Yang <yangjunlin@yulong.com>
Link: https://lore.kernel.org/r/20210124143853.1630-1-angkery@163.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

If the port partner is PD2, the PDOs of the local port should follow the
format defined in PD2 Spec. Dynamically modify the pre-defined PD3 PDOs
and transform them into PD2 format before sending them to the PD2 port
partner.
Reviewed-by: Guenter Roeck <linux@roeckus.net>
Signed-off-by: Kyle Tso <kyletso@google.com>
Link: https://lore.kernel.org/r/20210115163311.391332-1-kyletso@google.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

We need the fixes in here and this resolves a merge issue with
drivers/usb/gadget/udc/bdc/Kconfig.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Pull arch/sh updates from Rich Felker:
 "Cleanup and warning fixes"

* tag 'sh-for-5.11' of git://git.libc.org/linux-sh:
  sh/intc: Restore devm_ioremap() alignment
  sh: mach-sh03: remove duplicate include
  arch: sh: remove duplicate include
  sh: Drop ARCH_NR_GPIOS definition
  sh: Remove unused HAVE_COPY_THREAD_TLS macro
  sh: remove CONFIG_IDE from most defconfig
  sh: mm: Convert to DEFINE_SHOW_ATTRIBUTE
  sh: intc: Convert to DEFINE_SHOW_ATTRIBUTE
  arch/sh: hyphenate Non-Uniform in Kconfig prompt
  sh: dma: fix kconfig dependency for G2_DMA

Pull io_uring fixes from Jens Axboe:
 "Still need a final cancelation fix that isn't quite done done,
  expected in the next day or two. That said, this contains:

   - Wakeup fix for IOPOLL requests

   - SQPOLL split close op handling fix

   - Ensure that any use of io_uring fd itself is marked as inflight

   - Short non-regular file read fix (Pavel)

   - Fix up bad false positive warning (Pavel)

   - SQPOLL fixes (Pavel)

   - In-flight removal fix (Pavel)"

* tag 'io_uring-5.11-2021-01-24' of git://git.kernel.dk/linux-block:
  io_uring: account io_uring internal files as REQ_F_INFLIGHT
  io_uring: fix sleeping under spin in __io_clean_op
  io_uring: fix short read retries for non-reg files
  io_uring: fix SQPOLL IORING_OP_CLOSE cancelation state
  io_uring: fix skipping disabling sqo on exec
  io_uring: fix uring_flush in exit_files() warning
  io_uring: fix false positive sqo warning on flush
  io_uring: iopoll requests should also wake task ->in_idle state

Pull block fixes from Jens Axboe:

 - NVMe pull request from Christoph:
      - fix a status code in nvmet (Chaitanya Kulkarni)
      - avoid double completions in nvme-rdma/nvme-tcp (Chao Leng)
      - fix the CMB support to cope with NVMe 1.4 controllers (Klaus Jensen)
      - fix PRINFO handling in the passthrough ioctl (Revanth Rajashekar)
      - fix a double DMA unmap in nvme-pci

 - lightnvm error path leak fix (Pan)

 - MD pull request from Song:
      - Flush request fix (Xiao)

* tag 'block-5.11-2021-01-24' of git://git.kernel.dk/linux-block:
  lightnvm: fix memory leak when submit fails
  nvme-pci: fix error unwind in nvme_map_data
  nvme-pci: refactor nvme_unmap_data
  md: Set prev_flush_start and flush_bio in an atomic way
  nvmet: set right status on error in id-ns handler
  nvme-pci: allow use of cmb on v1.4 controllers
  nvme-tcp: avoid request double completion for concurrent nvme_tcp_timeout
  nvme-rdma: avoid request double completion for concurrent nvme_rdma_timeout
  nvme: check the PRINFO bit before deciding the host buffer length

Merge misc fixes from Andrew Morton:
 "18 patches.

  Subsystems affected by this patch series: mm (pagealloc, memcg, kasan,
  memory-failure, and highmem), ubsan, proc, and MAINTAINERS"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
  MAINTAINERS: add a couple more files to the Clang/LLVM section
  proc_sysctl: fix oops caused by incorrect command parameters
  powerpc/mm/highmem: use __set_pte_at() for kmap_local()
  mips/mm/highmem: use set_pte() for kmap_local()
  mm/highmem: prepare for overriding set_pte_at()
  sparc/mm/highmem: flush cache and TLB
  mm: fix page reference leak in soft_offline_page()
  ubsan: disable unsigned-overflow check for i386
  kasan, mm: fix resetting page_alloc tags for HW_TAGS
  kasan, mm: fix conflicts with init_on_alloc/free
  kasan: fix HW_TAGS boot parameters
  kasan: fix incorrect arguments passing in kasan_add_zero_shadow
  kasan: fix unaligned address is unhandled in kasan_remove_zero_shadow
  mm: fix numa stats for thp migration
  mm: memcg: fix memcg file_dirty numa stat
  mm: memcg/slab: optimize objcg stock draining
  mm: fix initialization of struct page for holes in memory layout
  x86/setup: don't remove E820_TYPE_RAM for pfn 0

Pull char/misc driver fixes from Greg KH:
 "Here are some small char/misc driver fixes for 5.11-rc5:

   - habanalabs driver fixes

   - phy driver fixes

   - hwtracing driver fixes

   - rtsx cardreader driver fix

  All of these have been in linux-next with no reported issues"

* tag 'char-misc-5.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
  misc: rtsx: init value of aspm_enabled
  habanalabs: disable FW events on device removal
  habanalabs: fix backward compatibility of idle check
  habanalabs: zero pci counters packet before submit to FW
  intel_th: pci: Add Alder Lake-P support
  stm class: Fix module init return on allocation failure
  habanalabs: prevent soft lockup during unmap
  habanalabs: fix reset process in case of failures
  habanalabs: fix dma_addr passed to dma_mmap_coherent
  phy: mediatek: allow compile-testing the dsi phy
  phy: cpcap-usb: Fix warning for missing regulator_disable
  PHY: Ingenic: fix unconditional build of phy-ingenic-usb

Merge tag 'driver-core-5.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

Pull driver core fixes from Greg KH:
 "Here are some small driver core fixes for 5.11-rc5 that resolve some
  reported problems:

   - revert of a -rc1 patch that was causing problems with some machines

   - device link device name collision problem fix (busses only have to
     name devices unique to their bus, not unique to all busses)

   - kernfs splice bugfixes to resolve firmware loading problems for
     Qualcomm systems.

   - other tiny driver core fixes for minor issues reported.

  All of these have been in linux-next with no reported problems"

* tag 'driver-core-5.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
  driver core: Fix device link device name collision
  driver core: Extend device_is_dependent()
  kernfs: wire up ->splice_read and ->splice_write
  kernfs: implement ->write_iter
  kernfs: implement ->read_iter
  Revert "driver core: Reorder devices on successful probe"
  Driver core: platform: Add extra error check in devm_platform_get_irqs_affinity()
  drivers core: Free dma_range_map when driver probe failed

Pull staging/IIO driver fixes from Greg KH:
 "Here are some IIO driver fixes for 5.11-rc5 to resolve some reported
  problems.

  Nothing major, just a few small fixes, all of these have been in
  linux-next for a while and full details are in the shortlog"

* tag 'staging-5.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
  iio: sx9310: Fix semtech,avg-pos-strength setting when > 16
  iio: common: st_sensors: fix possible infinite loop in st_sensors_irq_thread
  iio: ad5504: Fix setting power-down state
  counter:ti-eqep: remove floor
  drivers: iio: temperature: Add delay after the addressed reset command in mlx90632.c
  iio: adc: ti_am335x_adc: remove omitted iio_kfifo_free()
  dt-bindings: iio: accel: bma255: Fix bmc150/bmi055 compatible
  iio: sx9310: Off by one in sx9310_read_thresh()

Pull tty/serial fixes from Greg KH:
 "Here are three small tty/serial fixes for 5.11-rc5 to resolve reported
  problems:

   - two patches to fix up writing to ttys with splice

   - mvebu-uart driver fix for reported problem

  All of these have been in linux-next with no reported problems"

* tag 'tty-5.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
  tty: fix up hung_up_tty_write() conversion
  tty: implement write_iter
  serial: mvebu-uart: fix tx lost characters at power off

Pull USB fixes from Greg KH:
 "Here are some small USB driver fixes for 5.11-rc5.  They resolve:

   - xhci issues for some reported problems

   - ehci driver issue for one specific device

   - USB gadget fixes for some reported problems

   - cdns3 driver fixes for issues reported

   - MAINTAINERS file update

   - thunderbolt minor fix

  All of these have been in linux-next with no reported issues"

* tag 'usb-5.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
  usb: bdc: Make bdc pci driver depend on BROKEN
  xhci: tegra: Delay for disabling LFPS detector
  xhci: make sure TRB is fully written before giving it to the controller
  usb: udc: core: Use lock when write to soft_connect
  USB: gadget: dummy-hcd: Fix errors in port-reset handling
  usb: gadget: aspeed: fix stop dma register setting.
  USB: ehci: fix an interrupt calltrace error
  ehci: fix EHCI host controller initialization sequence
  MAINTAINERS: update Peter Chen's email address
  thunderbolt: Drop duplicated 0x prefix from format string
  MAINTAINERS: Update address for Cadence USB3 driver
  usb: cdns3: imx: improve driver .remove API
  usb: cdns3: imx: fix can't create core device the second time issue
  usb: cdns3: imx: fix writing read-only memory issue

The K: entry should ensure that Nick and I always get CC'd on patches that
touch these files but it is better to be explicit rather than implicit.

Link: https://lkml.kernel.org/r/20210114004059.2129921-1-natechancellor@gmail.comSigned-off-by: Nathan Chancellor <natechancellor@gmail.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The process_sysctl_arg() does not check whether val is empty before
invoking strlen(val).  If the command line parameter () is incorrectly
configured and val is empty, oops is triggered.

For example:
  "hung_task_panic=1" is incorrectly written as "hung_task_panic", oops is
  triggered. The call stack is as follows:
    Kernel command line: .... hung_task_panic
    ......
    Call trace:
    __pi_strlen+0x10/0x98
    parse_args+0x278/0x344
    do_sysctl_args+0x8c/0xfc
    kernel_init+0x5c/0xf4
    ret_from_fork+0x10/0x30

To fix it, check whether "val" is empty when "phram" is a sysctl field.
Error codes are returned in the failure branch, and error logs are
generated by parse_args().

Link: https://lkml.kernel.org/r/20210118133029.28580-1-nixiaoming@huawei.com
Fixes: 3db978d4 ("kernel/sysctl: support setting sysctl parameters from kernel command line")
Signed-off-by: Xiaoming Ni <nixiaoming@huawei.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Iurii Zaikin <yzaikin@google.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Heiner Kallweit <hkallweit1@gmail.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: <stable@vger.kernel.org>	[5.8+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The original PowerPC highmem mapping function used __set_pte_at() to
denote that the mapping is per CPU.  This got lost with the conversion
to the generic implementation.

Override the default map function.

Link: https://lkml.kernel.org/r/20210112170411.281464308@linutronix.de
Fixes: 47da42b2 ("powerpc/mm/highmem: Switch to generic kmap atomic")
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Andreas Larsson <andreas@gaisler.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Paul Cercueil <paul@crapouillou.net>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

set_pte_at() on MIPS invokes update_cache() which might recurse into
kmap_local().

Use set_pte() like the original MIPS highmem implementation did.

Link: https://lkml.kernel.org/r/20210112170411.187513575@linutronix.de
Fixes: a4c33e83 ("mips/mm/highmem: Switch to generic kmap atomic")
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reported-by: Paul Cercueil <paul@crapouillou.net>
Reported-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Acked-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Andreas Larsson <andreas@gaisler.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The generic kmap_local() map function uses set_pte_at(), but MIPS requires
set_pte() and PowerPC wants __set_pte_at().

Provide arch_kmap_local_set_pte() and default it to set_pte_at().

Link: https://lkml.kernel.org/r/20210112170411.056306194@linutronix.deSigned-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Andreas Larsson <andreas@gaisler.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Paul Cercueil <paul@crapouillou.net>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Patch series "mm/highmem: Fix fallout from generic kmap_local
conversions".

The kmap_local conversion wreckaged sparc, mips and powerpc as it missed
some of the details in the original implementation.

This patch (of 4):

The recent conversion to the generic kmap_local infrastructure failed to
assign the proper pre/post map/unmap flush operations for sparc.

Sparc requires cache flush before map/unmap and tlb flush afterwards.

Link: https://lkml.kernel.org/r/20210112170136.078559026@linutronix.de
Link: https://lkml.kernel.org/r/20210112170410.905976187@linutronix.de
Fixes: 3293efa9 ("sparc/mm/highmem: Switch to generic kmap atomic")
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reported-by: Andreas Larsson <andreas@gaisler.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Paul Cercueil <paul@crapouillou.net>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The conversion to move pfn_to_online_page() internal to
soft_offline_page() missed that the get_user_pages() reference taken by
the madvise() path needs to be dropped when pfn_to_online_page() fails.

Note the direct sysfs-path to soft_offline_page() does not perform a
get_user_pages() lookup.

When soft_offline_page() is handed a pfn_valid() && !pfn_to_online_page()
pfn the kernel hangs at dax-device shutdown due to a leaked reference.

Link: https://lkml.kernel.org/r/161058501210.1840162.8108917599181157327.stgit@dwillia2-desk3.amr.corp.intel.com
Fixes: feec24a6 ("mm, soft-offline: convert parameter to pfn")
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Reviewed-by: Naoya Horiguchi <naoya.horiguchi@nec.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Qian Cai <cai@lca.pw>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Building ubsan kernels even for compile-testing introduced these
warnings in my randconfig environment:

  crypto/blake2b_generic.c:98:13: error: stack frame size of 9636 bytes in function 'blake2b_compress' [-Werror,-Wframe-larger-than=]
  static void blake2b_compress(struct blake2b_state *S,

  crypto/sha512_generic.c:151:13: error: stack frame size of 1292 bytes in function 'sha512_generic_block_fn' [-Werror,-Wframe-larger-than=]
  static void sha512_generic_block_fn(struct sha512_state *sst, u8 const *src,

  lib/crypto/curve25519-fiat32.c:312:22: error: stack frame size of 2180 bytes in function 'fe_mul_impl' [-Werror,-Wframe-larger-than=]
  static noinline void fe_mul_impl(u32 out[10], const u32 in1[10], const u32 in2[10])

  lib/crypto/curve25519-fiat32.c:444:22: error: stack frame size of 1588 bytes in function 'fe_sqr_impl' [-Werror,-Wframe-larger-than=]
  static noinline void fe_sqr_impl(u32 out[10], const u32 in1[10])

Further testing showed that this is caused by
-fsanitize=unsigned-integer-overflow, but is isolated to the 32-bit x86
architecture.

The one in blake2b immediately overflows the 8KB stack area
architectures, so better ensure this never happens by disabling the
option for 32-bit x86.

Link: https://lkml.kernel.org/r/20210112202922.2454435-1-arnd@kernel.org
Link: https://lore.kernel.org/lkml/20201230154749.746641-1-arnd@kernel.org/
Fixes: d0a3ac54 ("ubsan: enable for all*config builds")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Marco Elver <elver@google.com>
Cc: George Popescu <georgepope@android.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

A previous commit added resetting KASAN page tags to
kernel_init_free_pages() to avoid false-positives due to accesses to
metadata with the hardware tag-based mode.

That commit did reset page tags before the metadata access, but didn't
restore them after.  As the result, KASAN fails to detect bad accesses
to page_alloc allocations on some configurations.

Fix this by recovering the tag after the metadata access.

Link: https://lkml.kernel.org/r/02b5bcd692e912c27d484030f666b350ad7e4ae4.1611074450.git.andreyknvl@google.com
Fixes: aa1ef4d7 ("kasan, mm: reset tags when accessing metadata")
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Marco Elver <elver@google.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Peter Collingbourne <pcc@google.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Branislav Rankov <Branislav.Rankov@arm.com>
Cc: Kevin Brodsky <kevin.brodsky@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

A few places where SLUB accesses object's data or metadata were missed
in a previous patch.  This leads to false positives with hardware
tag-based KASAN when bulk allocations are used with init_on_alloc/free.

Fix the false-positives by resetting pointer tags during these accesses.

(The kasan_reset_tag call is removed from slab_alloc_node, as it's added
 into maybe_wipe_obj_freeptr.)

Link: https://linux-review.googlesource.com/id/I50dd32838a666e173fe06c3c5c766f2c36aae901
Link: https://lkml.kernel.org/r/093428b5d2ca8b507f4a79f92f9929b35f7fada7.1610731872.git.andreyknvl@google.com
Fixes: aa1ef4d7 ("kasan, mm: reset tags when accessing metadata")
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Marco Elver <elver@google.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Peter Collingbourne <pcc@google.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Branislav Rankov <Branislav.Rankov@arm.com>
Cc: Kevin Brodsky <kevin.brodsky@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The initially proposed KASAN command line parameters are redundant.

This change drops the complex "kasan.mode=off/prod/full" parameter and
adds a simpler kill switch "kasan=off/on" instead.  The new parameter
together with the already existing ones provides a cleaner way to
express the same set of features.

The full set of parameters with this change:

  kasan=off/on             - whether KASAN is enabled
  kasan.fault=report/panic - whether to only print a report or also panic
  kasan.stacktrace=off/on  - whether to collect alloc/free stack traces

Default values:

  kasan=on
  kasan.fault=report
  kasan.stacktrace=on  (if CONFIG_DEBUG_KERNEL=y)
  kasan.stacktrace=off (otherwise)

Link: https://linux-review.googlesource.com/id/Ib3694ed90b1e8ccac6cf77dfd301847af4aba7b8
Link: https://lkml.kernel.org/r/4e9c4a4bdcadc168317deb2419144582a9be6e61.1610736745.git.andreyknvl@google.comSigned-off-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Reviewed-by: Marco Elver <elver@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Peter Collingbourne <pcc@google.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Branislav Rankov <Branislav.Rankov@arm.com>
Cc: Kevin Brodsky <kevin.brodsky@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

kasan_remove_zero_shadow() shall use original virtual address, start and
size, instead of shadow address.

Link: https://lkml.kernel.org/r/20210103063847.5963-1-lecopzer@gmail.com
Fixes: 0207df4f ("kernel/memremap, kasan: make ZONE_DEVICE with work with KASAN")
Signed-off-by: Lecopzer Chen <lecopzer.chen@mediatek.com>
Reviewed-by: Andrey Konovalov <andreyknvl@google.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Alexander Potapenko <glider@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

During testing kasan_populate_early_shadow and kasan_remove_zero_shadow,
if the shadow start and end address in kasan_remove_zero_shadow() is not
aligned to PMD_SIZE, the remain unaligned PTE won't be removed.

In the test case for kasan_remove_zero_shadow():

    shadow_start: 0xffffffb802000000, shadow end: 0xffffffbfbe000000

    3-level page table:
      PUD_SIZE: 0x40000000 PMD_SIZE: 0x200000 PAGE_SIZE: 4K

0xffffffbf80000000 ~ 0xffffffbfbdf80000 will not be removed because in
kasan_remove_pud_table(), kasan_pmd_table(*pud) is true but the next
address is 0xffffffbfbdf80000 which is not aligned to PUD_SIZE.

In the correct condition, this should fallback to the next level
kasan_remove_pmd_table() but the condition flow always continue to skip
the unaligned part.

Fix by correcting the condition when next and addr are neither aligned.

Link: https://lkml.kernel.org/r/20210103135621.83129-1-lecopzer@gmail.com
Fixes: 0207df4f ("kernel/memremap, kasan: make ZONE_DEVICE with work with KASAN")
Signed-off-by: Lecopzer Chen <lecopzer.chen@mediatek.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: YJ Chiang <yj.chiang@mediatek.com>
Cc: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull irq fixes from Borislav Petkov:

 - Fix a kernel panic in mips-cpu due to invalid irq domain hierarchy.

 - Fix to not lose IPIs on bcm2836.

 - Fix for a bogus marking of ITS devices as shared due to unitialized
   stack variable.

 - Clear a phantom interrupt on qcom-pdc to unblock suspend.

 - Small cleanups, warning and build fixes.

* tag 'irq_urgent_for_v5.11_rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  genirq: Export irq_check_status_bit()
  irqchip/mips-cpu: Set IPI domain parent chip
  irqchip/pruss: Simplify the TI_PRUSS_INTC Kconfig
  irqchip/loongson-liointc: Fix build warnings
  driver core: platform: Add extra error check in devm_platform_get_irqs_affinity()
  irqchip/bcm2836: Fix IPI acknowledgement after conversion to handle_percpu_devid_irq
  irqchip/irq-sl28cpld: Convert comma to semicolon
  genirq/msi: Initialize msi_alloc_info before calling msi_domain_prepare_irqs()

Pull objtool fixes from Borislav Petkov:

 - Adjust objtool to handle a recent binutils change to not generate
   unused symbols anymore.

 - Revert the fail-the-build-on-fatal-errors objtool strategy for now
   due to the ever-increasing matrix of supported toolchains/plugins and
   them causing too many such fatal errors currently.

 - Do not add empty symbols to objdump's rbtree to accommodate clang
   removing section symbols.

* tag 'objtool_urgent_for_v5.11_rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  objtool: Don't fail on missing symbol table
  objtool: Don't fail the kernel build on fatal errors
  objtool: Don't add empty symbols to the rbtree