- 17 Nov, 2016 15 commits
-
-
Anshuman Khandual authored
This patch adds ptrace interface test for VSX, VMX registers inside suspended TM context. Signed-off-by:
Anshuman Khandual <khandual@linux.vnet.ibm.com> Signed-off-by:
Simon Guo <wei.guo.simon@gmail.com> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au>
-
Anshuman Khandual authored
This patch adds ptrace interface test for VSX, VMX registers inside TM context. This also adds ptrace interface based helper functions related to chckpointed VSX, VMX registers access. Signed-off-by:
-
Anshuman Khandual authored
This patch adds ptrace interface test for VSX, VMX registers. This also adds ptrace interface based helper functions related to VSX, VMX registers access. This also adds some assembly helper functions related to VSX and VMX registers. Signed-off-by:
-
Anshuman Khandual authored
This patch adds ptrace interface test for TAR, PPR, DSCR registers inside suspended TM context. Signed-off-by:
-
Anshuman Khandual authored
This patch adds ptrace interface test for TAR, PPR, DSCR registers inside TM context. This also adds ptrace interface based helper functions related to checkpointed TAR, PPR, DSCR register access. Signed-off-by:
-
Anshuman Khandual authored
This patch adds ptrace interface test for TAR, PPR, DSCR registers. This also adds ptrace interface based helper functions related to TAR, PPR, DSCR register access. Signed-off-by:
-
Anshuman Khandual authored
This patch adds ptrace interface test for GPR/FPR registers inside suspended TM context. Signed-off-by:
-
Anshuman Khandual authored
This patch adds ptrace interface test for GPR/FPR registers inside TM context. This adds ptrace interface based helper functions related to checkpointed GPR/FPR access. Signed-off-by:
-
Anshuman Khandual authored
This patch adds ptrace interface test for GPR/FPR registers. This adds ptrace interface based helper functions related to GPR/FPR access and some assembly helper functions related to GPR/FPR registers. Signed-off-by:
-
Simon Guo authored
There are some functions, especially register related, which can be shared across multiple selftests/powerpc test directories. This patch creates a new include directory to store those shared files, so that the file layout becomes more neat. Signed-off-by:
-
Anshuman Khandual authored
This patch adds SPR number for TAR, PPR, DSCR special purpose registers. It also adds TM, VSX, VMX related instructions which will then be used by patches later in the series. Now that the new DSCR register definitions (SPRN_DSCR_PRIV and SPRN_DSCR) are defined outside this directory, use them instead. Signed-off-by:
-
Rashmica Gupta authored
Useful to be able to dump the kernel hash page table to check which pages are hashed along with their sizes and other details. Add a debugfs file to check the hash page table. If radix is enabled (and so there is no hash page table) then this file doesn't exist. To use this the PPC_PTDUMP config option must be selected. Signed-off-by:
Rashmica Gupta <rashmicy@gmail.com> [mpe: Fix build with SPARSEMEM_VMEMMAP=n & PSERIES=n] Signed-off-by:
-
Rashmica Gupta authored
Useful to be able to dump the kernels page tables to check permissions and memory types - derived from arm64's implementation. Add a debugfs file to check the page tables. To use this the PPC_PTDUMP config option must be selected. Signed-off-by:
-
Michael Ellerman authored
Currently there's some CMO (Cooperative Memory Overcommit) code, in plpar_wrappers.h. Some of it is #ifdef CONFIG_PSERIES and some of it isn't. The end result being if a file includes plpar_wrappers.h it won't build with CONFIG_PSERIES=n. Fix it by moving the CMO code into platforms/pseries. The two hcall wrappers can just be moved into their only caller, cmm.c, and the accessors can go in pseries.h. Note we need the accessors because cmm.c can be built as a module, so there needs to be a split between the built-in code vs the module, and that's achieved by using those accessors. Signed-off-by: -
Balbir Singh authored
Rename "sift" to "shift". Signed-off-by:
Balbir Singh <bsingharora@gmail.com> Signed-off-by:
-
- 14 Nov, 2016 25 commits
-
-
Bartlomiej Zolnierkiewicz authored
IDE subsystem has been deprecated since 2009 and the majority (if not all) of Linux distributions have switched to use libata for ATA support exclusively. However there are still some users (mostly old or/and embedded non-x86 systems) that have not converted from using IDE subsystem to libata PATA drivers. This doesn't seem to be good thing in the long-term for Linux as while there is less and less PATA systems left in use: * testing efforts are divided between two subsystems * having duplicate drivers for same hardware confuses users This patch converts storcenter_defconfig to use libata PATA drivers. Signed-off-by:Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
-
Bartlomiej Zolnierkiewicz authored
IDE subsystem has been deprecated since 2009 and the majority (if not all) of Linux distributions have switched to use libata for ATA support exclusively. However there are still some users (mostly old or/and embedded non-x86 systems) that have not converted from using IDE subsystem to libata PATA drivers. This doesn't seem to be good thing in the long-term for Linux as while there is less and less PATA systems left in use: * testing efforts are divided between two subsystems * having duplicate drivers for same hardware confuses users This patch converts pseries_defconfig to use libata PATA drivers. Signed-off-by: -
Bartlomiej Zolnierkiewicz authored
IDE subsystem has been deprecated since 2009 and the majority (if not all) of Linux distributions have switched to use libata for ATA support exclusively. However there are still some users (mostly old or/and embedded non-x86 systems) that have not converted from using IDE subsystem to libata PATA drivers. This doesn't seem to be good thing in the long-term for Linux as while there is less and less PATA systems left in use: * testing efforts are divided between two subsystems * having duplicate drivers for same hardware confuses users This patch converts ppc6xx_defconfig to use libata PATA drivers. Signed-off-by: -
Bartlomiej Zolnierkiewicz authored
IDE subsystem has been deprecated since 2009 and the majority (if not all) of Linux distributions have switched to use libata for ATA support exclusively. However there are still some users (mostly old or/and embedded non-x86 systems) that have not converted from using IDE subsystem to libata PATA drivers. This doesn't seem to be good thing in the long-term for Linux as while there is less and less PATA systems left in use: * testing efforts are divided between two subsystems * having duplicate drivers for same hardware confuses users This patch converts ppc64e_defconfig to use libata PATA drivers. Signed-off-by: -
Bartlomiej Zolnierkiewicz authored
IDE subsystem has been deprecated since 2009 and the majority (if not all) of Linux distributions have switched to use libata for ATA support exclusively. However there are still some users (mostly old or/and embedded non-x86 systems) that have not converted from using IDE subsystem to libata PATA drivers. This doesn't seem to be good thing in the long-term for Linux as while there is less and less PATA systems left in use: * testing efforts are divided between two subsystems * having duplicate drivers for same hardware confuses users This patch converts ppc64_defconfig to use libata PATA drivers. Signed-off-by: -
Bartlomiej Zolnierkiewicz authored
IDE subsystem has been deprecated since 2009 and the majority (if not all) of Linux distributions have switched to use libata for ATA support exclusively. However there are still some users (mostly old or/and embedded non-x86 systems) that have not converted from using IDE subsystem to libata PATA drivers. This doesn't seem to be good thing in the long-term for Linux as while there is less and less PATA systems left in use: * testing efforts are divided between two subsystems * having duplicate drivers for same hardware confuses users This patch converts pmac32_defconfig to use libata PATA drivers. Signed-off-by: -
Bartlomiej Zolnierkiewicz authored
This patch disables deprecated IDE subsystem in pasemi_defconfig (no IDE host drivers are selected in this config so there is no valid reason to enable IDE subsystem itself). Cc: Olof Johansson <olof@lixom.net> Signed-off-by: -
Bartlomiej Zolnierkiewicz authored
IDE subsystem has been deprecated since 2009 and the majority (if not all) of Linux distributions have switched to use libata for ATA support exclusively. However there are still some users (mostly old or/and embedded non-x86 systems) that have not converted from using IDE subsystem to libata PATA drivers. This doesn't seem to be good thing in the long-term for Linux as while there is less and less PATA systems left in use: * testing efforts are divided between two subsystems * having duplicate drivers for same hardware confuses users This patch converts maple_defconfig to use libata PATA drivers. Signed-off-by: -
Bartlomiej Zolnierkiewicz authored
IDE subsystem has been deprecated since 2009 and the majority (if not all) of Linux distributions have switched to use libata for ATA support exclusively. However there are still some users (mostly old or/and embedded non-x86 systems) that have not converted from using IDE subsystem to libata PATA drivers. This doesn't seem to be good thing in the long-term for Linux as while there is less and less PATA systems left in use: * testing efforts are divided between two subsystems * having duplicate drivers for same hardware confuses users This patch converts g5_defconfig to use libata PATA drivers. Signed-off-by: -
Bartlomiej Zolnierkiewicz authored
IDE subsystem has been deprecated since 2009 and the majority (if not all) of Linux distributions have switched to use libata for ATA support exclusively. However there are still some users (mostly old or/and embedded non-x86 systems) that have not converted from using IDE subsystem to libata PATA drivers. This doesn't seem to be good thing in the long-term for Linux as while there is less and less PATA systems left in use: * testing efforts are divided between two subsystems * having duplicate drivers for same hardware confuses users This patch converts chrp32_defconfig to use libata PATA drivers. Signed-off-by: -
Bartlomiej Zolnierkiewicz authored
IDE subsystem has been deprecated since 2009 and the majority (if not all) of Linux distributions have switched to use libata for ATA support exclusively. However there are still some users (mostly old or/and embedded non-x86 systems) that have not converted from using IDE subsystem to libata PATA drivers. This doesn't seem to be good thing in the long-term for Linux as while there is less and less PATA systems left in use: * testing efforts are divided between two subsystems * having duplicate drivers for same hardware confuses users This patch converts cell_defconfig to use libata PATA drivers. Signed-off-by: -
Bartlomiej Zolnierkiewicz authored
IDE subsystem has been deprecated since 2009 and the majority (if not all) of Linux distributions have switched to use libata for ATA support exclusively. However there are still some users (mostly old or/and embedded non-x86 systems) that have not converted from using IDE subsystem to libata PATA drivers. This doesn't seem to be good thing in the long-term for Linux as while there is less and less PATA systems left in use: * testing efforts are divided between two subsystems * having duplicate drivers for same hardware confuses users This patch converts amigaone_defconfig to use libata PATA drivers. Signed-off-by: -
Peter Senna Tschudin authored
Returning a negative value for a boolean function seem to have the undesired effect of returning true. require_paranoia_below() is a boolean function, but the variable used to store the return value is an integer, receiving -1 or 0. This patch converts rc to bool, replaces -1 by false, and 0 by true. mpe: This wasn't exhibiting in practice because the common case, where we do the comparison of the desired level vs the current value, was being compiled into a computation based on the result of the comparison, ie. it wasn't using the default -1 value at all. However that was just luck and the code is still wrong. Signed-off-by:
Peter Senna Tschudin <peter.senna@gmail.com> Signed-off-by:
Andrew Shadura <andrew.shadura@collabora.co.uk> Signed-off-by:
-
Johan Hovold authored
Make sure to drop any device reference taken by vio_find_node() when adding and removing virtual I/O slots. Fixes: 5eeb8c63 ("[PATCH] PCI Hotplug: rpaphp: Move VIO registration") Signed-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
-
Johan Hovold authored
Add comment clarifying that vio_find_node() takes a reference to the embedded struct device which needs to be dropped after use. Signed-off-by:
-
Johan Hovold authored
Make sure to drop any reference taken by bus_find_device() when creating devices during init and driver registration. Fixes: 55347cc9 ("[POWERPC] ibmebus: Add device creation and bus probing based on of_device") Signed-off-by:
-
Johan Hovold authored
Make sure to drop any reference taken by bus_find_device() in the sysfs callbacks that are used to create and destroy devices based on device-tree entries. Fixes: 6bccf755 ("[POWERPC] ibmebus: dynamic addition/removal of adapters, some code cleanup") Signed-off-by:
-
Jack Miller authored
This condenses the opal node searching into a single function that finds all compatible nodes, instead of just searching the ibm,opal children, for ipmi, flash, and prd similar to how opal-i2c nodes are found. Signed-off-by:
Jack Miller <jack@codezen.org> Signed-off-by:
-
Michael Neuling authored
Load monitored is no longer supported on POWER9 so let's remove the code. This reverts commit bd3ea317 ("powerpc: Load Monitor Register Support"). Signed-off-by:
Michael Neuling <mikey@neuling.org> Signed-off-by:
-
Michael Neuling authored
Load monitored won't be supported in POWER9, so PPC_FEATURE2_ARCH_3_00 (in HWCAP2) will no longer imply Load monitor support. These Load monitored tests are enabled by PPC_FEATURE2_ARCH_3_00 so they are now bogus and need to be removed. This reverts commit 16c19a2e ("selftests/powerpc: Load Monitor Register Tests"). Signed-off-by:
-
Michael Ellerman authored
No one uses reiserfs much these days, or is likely to in future. So drop it from pseries and powernv defconfigs to save time and space. It's still enabled in ppc64_defconfig so we get some build coverage. Signed-off-by: -
Elimar Riesebieter authored
We can use the front led of powerbooks/ibooks to visualize disk activity without the deprecated IDE_GD_ATA. Signed-off-by:
Elimar Riesebieter <riesebie@lxtec.de> Signed-off-by:
-
Balbir Singh authored
In ISA v2.05, the tlbiel instruction takes two arguments, RB and L: tlbiel RB,L +---------+---------+----+---------+---------+---------+----+ | 31 | / | L | / | RB | 274 | / | | 31 - 26 | 25 - 22 | 21 | 20 - 16 | 15 - 11 | 10 - 1 | 0 | +---------+---------+----+---------+---------+---------+----+ In ISA v2.06 tlbiel takes only one argument, RB: tlbiel RB +---------+---------+---------+---------+---------+----+ | 31 | / | / | RB | 274 | / | | 31 - 26 | 25 - 21 | 20 - 16 | 15 - 11 | 10 - 1 | 0 | +---------+---------+---------+---------+---------+----+ And in ISA v3.00 tlbiel takes five arguments: tlbiel RB,RS,RIC,PRS,R +---------+---------+----+---------+----+----+---------+---------+----+ | 31 | RS | / | RIC |PRS | R | RB | 274 | / | | 31 - 26 | 25 - 21 | 20 | 19 - 18 | 17 | 16 | 15 - 11 | 10 - 1 | 0 | +---------+---------+----+---------+----+----+---------+---------+----+ However the assembler also accepts "tlbiel RB", and generates "tlbiel RB,r0,0,0,0". As you can see above the L field from the v2.05 encoding overlaps with the reserved field of the v2.06 encoding, and the low bit of the RS field of the v3.00 encoding. Currently in __tlbiel() we generate two tlbiel instructions manually using hex constants. In the first case, for MMU_PAGE_4K, we generate "tlbiel RB,0", which is safe in all cases, because the L bit is zero. However in the default case we generate "tlbiel RB,1", therefore setting bit 21 to 1. This is not an actual bug on v2.06 processors, because the CPU ignores the value of the reserved field. However software is supposed to encode the reserved fields as zero to enable forward compatibility. On v3.00 processors setting bit 21 to 1 and no other bits of RS, means we are using r1 for the value of RS. Although it's not obvious, the code sets the IS field (bits 10-11) to 0 (by omission), and L=1, in the va value, which is passed as RB. We also pass R=0 in the instruction. The combination of IS=0, L=1 and R=0 means the value of RS is not used, so even on ISA v3.00 there is no actual bug. We should still fix it, as setting a reserved bit on v2.06 is naughty, and we are only avoiding a bug on v3.00 by accident rather than design. Use ASM_FTR_IFSET() to generate the single argument form on ISA v2.06 and later, and the two argument form on pre v2.06. Although there may be very old toolchains which don't understand tlbiel, we have other code in the tree which has been using tlbiel for over five years, and no one has reported any build failures, so just let the assembler generate the instructions. Signed-off-by:
-
Michael Ellerman authored
When we're not compiling for a specific CPU, ie. none of the CONFIG_POWERx_CPU options are set, and CONFIG_GENERIC_CPU *is* set, we currently don't pass any -mcpu option to the compiler. This means the compiler builds for a "generic" Power CPU. But back in 2014 we dropped support for pre power4 CPUs in commit 468a3302 ("powerpc: Drop support for pre-POWER4 cpus"). Given that, there's no point in building the kernel to run on pre power4 cpus. So update the flags we pass to the compiler when CONFIG_GENERIC_CPU is set, to specify -mcpu=power4. Signed-off-by:
-
Nicholas Piggin authored
This adds a config option that can help exercise the case when the kernel is not running at PAGE_OFFSET. Signed-off-by:
Nicholas Piggin <npiggin@gmail.com> Reviewed-by:
-
