Primarily intended as a way to pass per-head state around during
supervisor handling, and share logic between NV50/GF119.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

This is to allow hw-specific code to instantiate output resources first,
so we can cull unsupported output paths based on them.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

Not all users of nvkm_output_dp have been changed here.  The remaining
ones belong to code that's disappearing in upcoming commits.

This also modifies the debug level of some messages.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

This isn't technically "output", but, "display/output path".

Not all users of nvkm_output have been changed here.  The remaining
ones belong to code that's disappearing in upcoming commits.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

Upcoming changes to split OR from output path drastically change the
placement of various operations.

In order to make the real changes clearer, do the moving around part
ahead of time.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

This will ensure unspecified args are easily identified.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

As of DCB 4.1, these are not the same thing.

Compatibility temporarily in place until callers have been updated.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

No (known) case yet, but other tables have been moving beyond 16-bits,
so we may as well be prepared.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

Compatibility temporarily in place until all callers have been updated.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

We already have a subdev pointer, from which we can locate the device's
BIOS subdev.  No need for a separate pointer.

Structure/callers not updated yet, as I want to batch more changes and
only touch the callers once.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

nvkm_timer_alarm() already handles this as part of protecting against
callers passing in no timeout value.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

I only saw those values inside the vbios: 0xff, 0xfd, 0xfc, 0xfa for valid
rails.

No idea what the lower value does, but at least we get power readings on
a lot of Fermi GPUs with that.

v2: add missing parentheses
Signed-off-by: Karol Herbst <karolherbst@gmail.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

This is according to what we have in nvbios.

Fixes "ERROR: Can't get value of subfeature in0_min: Can't read" errors
in sensors for some GPUs.
Signed-off-by: Karol Herbst <karolherbst@gmail.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

Enable stereoscopic output for HDMI and DisplayPort connectors on
NV50+ (G80+) hardware.  We do not enable stereoscopy on older
hardware in case there is some older board that still has HDMI
output but for which we have no logic for setting the Vendor
InfoFrame.

With this, I get an obvious 3D output when using the "testdisplay"
program from intel-gpu-tools with the "-3" parameter and outputting
to a 3D-capable HDMI display, for all available 3D modes (be they
TB, SBSH, or FP) on all four G80+ DISPs.
Signed-off-by: Alastair Bridgewater <alastair.bridgewater@gmail.com>

Frame-packing modes add an extra vtotal raster lines to each frame
above and beyond what the basic mode description calls for.
Account for this during scaler configuration (possibly a bit of a
hack), during CRTC configuration (clearly not a hack), and when
checking that a mode is valid for a given connector (cribbed from
the i915 driver).
Signed-off-by: Alastair Bridgewater <alastair.bridgewater@gmail.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

Now that we have the InfoFrame data being provided, for the most
part, program the hardware to use it.

While we're here, and since the functionality will come in handy
for supporting 3D stereoscopy, implement setting the Vendor
("generic"?) InfoFrame.

Also don't enable any InfoFrame that is not provided, and disable
the Vendor InfoFrame when disabling the output.
Signed-off-by: Alastair Bridgewater <alastair.bridgewater@gmail.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

Now that we have the InfoFrame data being provided, for the most
part, program the hardware to use it.

While we're here, and since the functionality will come in handy
for supporting 3D stereoscopy, implement setting the Vendor
("generic"?) InfoFrame.

Also don't enable any InfoFrame that is not provided, and disable
the Vendor InfoFrame when disabling the output.
Signed-off-by: Alastair Bridgewater <alastair.bridgewater@gmail.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

Now that we have the InfoFrame data being provided, for the most
part, program the hardware to use it.

While we're here, and since the functionality will come in handy
for supporting 3D stereoscopy, implement setting the Vendor
("generic") InfoFrame.

Also don't enable any AVI or Vendor InfoFrame that is not provided,
and disable the Vendor InfoFrame when disabling the output.

Ignore the Audio InfoFrame: We don't supply it, and altering HDMI
audio semantics (for better or worse) on this hardware is out of
scope for me at this time.
Signed-off-by: Alastair Bridgewater <alastair.bridgewater@gmail.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

Now that we have the InfoFrame data being provided, for the most
part, program the hardware to use it.

While we're here, and since the functionality will come in handy
for supporting 3D stereoscopy, implement setting the Vendor
("generic"?) InfoFrame.

Also don't enable any AVI or Vendor InfoFrame that is not provided,
and disable the Vendor InfoFrame when disabling the output.

Ignore the Audio InfoFrame: We don't supply it, and altering HDMI
audio semantics (for better or worse) on this hardware is out of
scope for me at this time.
Signed-off-by: Alastair Bridgewater <alastair.bridgewater@gmail.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

HDMI InfoFrames are passed to NVKM as bags of bytes, but the
hardware needs them to be packed into words.  Rather than having
four (or more) copies of the packing logic introduce a single copy
now, in a central place.

We currently need these for AVI and Vendor InfoFrames, but we may
also expect to need them for Audio InfoFrames at some point.
Signed-off-by: Alastair Bridgewater <alastair.bridgewater@gmail.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

Now that we have mechanism by which to pass mode-dependent HDMI
InfoFrames to the low-level hardware driver, it is incumbent upon
us to do so.
Signed-off-by: Alastair Bridgewater <alastair.bridgewater@gmail.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

The nouveau driver, in the Linux 3.7 days, used to try and set the
AVI InfoFrame based on the selected display mode.  These days, it
uses a fixed set of InfoFrames.  Start to correct that, by
providing a mechanism whereby InfoFrame data may be passed to the
NVKM functions that do the actual configuration.

At this point, only establish the new parameters and their parsing,
don't actually use the data anywhere yet (since it's not supplied
anywhere).
Signed-off-by: Alastair Bridgewater <alastair.bridgewater@gmail.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm_mode_set_crtcinfo() does compensation for interlace and
doublescan timing effects already, so do it first and use the
compensated figures instead of the constant "vscan / ilace" terms
that we had before.

And then it turns out that the hardware model for how the timing
parameters are configured is basically the standard model, but
starting one clock before the sync pulse rather than at the start
of the display area, which lets us drastically simplify the
overall timing calculations (verifying the changes by algebraic
operations is left as an exercise for the reader).

Finally, there were a couple of issues with the computation of
m->v.blankus that are addressed here.  Interlaced modes would
generate a negative intermediate result.  Double scan modes would
generate an overestimate rather than an underestimate.  And when
enabling frame-packing modes, a rather extreme overestimate would
be generated.  Fixed, by using the timings as adjusted for the
CRTC to find the length of the vertical blanking period instead of
mixing adjusted and pre-adjustment timing parameters.
Signed-off-by: Alastair Bridgewater <alastair.bridgewater@gmail.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

Linux 4.12-rc5 for nouveau fixes

imx-drm: cleanups and YUV 4:2:0 memory read/write reduction support

- Remove counter load enable form PRE, which has no effect.
- Add support for setting the double read/write reduction flag in channel
  parameter memory. This can be used to save some memory bandwidth when
  capturing in YUV 4:2:0 chroma subsampled formats.
- Allocate DMA channel structures as needed, most of the 64 channels are
  unused or even reserved.
- Remove unused interrupt busy waiting routine.
- Set VDIC field order for both AUTO and MAN inputs simultaneously as
  both can't be active at the same time.

* tag 'imx-drm-next-2017-06-08' of git://git.pengutronix.de/git/pza/linux:
  gpu: ipu-v3: vdic: include AUTO field order bit in ipu_vdi_set_field_order
  gpu: ipu-v3: remove interrupt busy waiting routine
  gpu: ipu-v3: allocate ipuv3_channels as needed
  gpu: ipu-v3: Add support for double read/write reduction
  gpu: ipu-v3: prg: remove counter load enable

some fsl-dcu cleanups

* tag 'drm-fsl-dcu-for-v4.13' of http://git.agner.ch/git/linux-drm-fsl-dcu:
  drm/fsl-dcu: use new drm_atomic_helper_shutdown
  drm/fsl-dcu: implement irq_preinstall/uninstall callbacks
  drm/fsl: Drop drm_vblank_cleanup

The series interleaves DRM and V4L2 patches due to dependencies between the R-
Car DU and VSP drivers. Mauro has acked all the V4L2 patches to go through
your tree, and they don't conflict with anything queued for v4.13 in his tree.
If I need to send any conflicting patches through Mauro's tree for v4.13, I'll
make sure to base them on this branch.

* 'drm/next/du' of git://linuxtv.org/pinchartl/media:
  drm: rcar-du: Map memory through the VSP device
  v4l: vsp1: Add API to map and unmap DRM buffers through the VSP
  v4l: vsp1: Map the DL and video buffers through the proper bus master
  v4l: rcar-fcp: Add an API to retrieve the FCP device
  v4l: rcar-fcp: Don't get/put module reference
  drm: rcar-du: Register a completion callback with VSP1
  v4l: vsp1: Extend VSP1 module API to allow DRM callbacks
  v4l: vsp1: Postpone frame end handling in event of display list race
  drm: rcar-du: Arm the page flip event after queuing the page flip

Merge tag 'sunxi-drm-for-4.13' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux into drm-next

sun4i-drm changes for 4.13

An unusually big pull request for this merge window, with three notable
features:
  - V3s display engine support. This is especially notable because it uses
    a different display engine used on the newer Allwinner SoCs (H3, A64
    and the likes) that will be quite easily supported now.
  - HDMI support for the old Allwinner SoCs. This is enabled only on the
    A10s for now, but should be really easy to extend to deal with A10, A20
    and A31
  - Preliminary work to deal with dual-pipeline SoCs (A10, A20, A31, H3,
    etc.). It currently ignores the second pipeline, but we can use the
    dual-pipelines bindings. This will be useful to enable the display
    pipeline while we work on the dual-pipeline.

* tag 'sunxi-drm-for-4.13' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux: (27 commits)
  drm/sun4i: Add compatible for the A10s pipeline
  drm/sun4i: Add HDMI support
  dt-bindings: display: sun4i: Add allwinner,tcon-channel property
  dt-bindings: display: sun4i: Add HDMI display bindings
  drm/sun4i: Ignore the generic connectors for components
  drm/sun4i: tcon: multiply the vtotal when not in interlace
  drm/sun4i: tcon: Change vertical total size computation inconsistency
  drm/sun4i: tcon: Fix tcon channel 1 backporch calculation
  drm/sun4i: tcon: Switch mux on only for composite
  drm/sun4i: tcon: Move the muxing out of the mode set function
  drm/sun4i: tcon: Add channel debug
  drm/sun4i: tcon: add support for V3s TCON
  drm/sun4i: Add compatible string for V3s display engine
  drm/sun4i: add support for Allwinner DE2 mixers
  drm/sun4i: add a Kconfig option for sun4i-backend
  drm/sun4i: abstract a engine type
  drm/sun4i: return only planes for layers created
  dt-bindings: add bindings for DE2 on V3s SoC
  drm/sun4i: backend: Clarify sun4i_backend_layer_enable debug message
  drm/sun4i: Set TCON clock inside sun4i_tconX_mode_set
  ...

New radeon and amdgpu features for 4.13:
- Lots of Vega10 bug fixes
- Preliminary Raven support
- KIQ support for compute rings
- MEC queue management rework from Andres
- Audio support for DCE6
- SR-IOV improvements
- Improved module parameters for controlling radeon vs amdgpu support
  for SI and CIK
- Bug fixes
- General code cleanups

[airlied: dropped drmP.h header from one file was needed and build broke]

* 'drm-next-4.13' of git://people.freedesktop.org/~agd5f/linux: (362 commits)
  drm/amdgpu: Fix compiler warnings
  drm/amdgpu: vm_update_ptes remove code duplication
  drm/amd/amdgpu: Port VCN over to new SOC15 macros
  drm/amd/amdgpu: Port PSP v10.0 over to new SOC15 macros
  drm/amd/amdgpu: Port PSP v3.1 over to new SOC15 macros
  drm/amd/amdgpu: Port NBIO v7.0 driver over to new SOC15 macros
  drm/amd/amdgpu: Port NBIO v6.1 driver over to new SOC15 macros
  drm/amd/amdgpu: Port UVD 7.0 over to new SOC15 macros
  drm/amd/amdgpu: Port MMHUB over to new SOC15 macros
  drm/amd/amdgpu: Cleanup gfxhub read-modify-write patterns
  drm/amd/amdgpu: Port GFXHUB over to new SOC15 macros
  drm/amd/amdgpu: Add offset variant to SOC15 macros
  drm/amd/powerplay: add avfs control for Vega10
  drm/amdgpu: add virtual display support for raven
  drm/amdgpu/gfx9: fix compute ring doorbell index
  drm/amd/amdgpu: Rename KIQ ring to avoid spaces
  drm/amd/amdgpu: gfx9 tidy ups (v2)
  drm/amdgpu: add contiguous flag in ucode bo create
  drm/amdgpu: fix missed gpu info firmware when cache firmware during S3
  drm/amdgpu: export test ib debugfs interface
  ...

Cross-subsystem Changes:
- dt-bindings: add vendor prefix for NLT Technologies, Ltd. (Lucas)
- dt-bindings: Add support for samsung s6e3hf2 panel (Hoegeun)

Core Changes:
- Add drm_panel_bridge to avoid connector boilerplate in drivers (Eric)
- Trival fixes for dupe forward decl and reduce scope of variable (Dawid)

Driver Changes:
- dw-hdmi: Use mode_valid hook on bridge instead of connector (Jose)
- vc4,atmel-hlcdc: Use drm_panel_bridge where appropriate (Eric)
- panel: Add Innolux P079ZCA panel driver (Chris)
- panel-simple: Add NL12880B20-05, NL192108AC18-02D, P320HVN03 panels (Lucas)
- panel-samsung-s6e3ha2: Add s6e3hf2 panel support (Hoegeun)
- zte,vc4,pl111,panel,mxsfb: Miscellaneous fixes

Cc: Jose Abreu <Jose.Abreu@synopsys.com>
Cc: Eric Anholt <eric@anholt.net>
Cc: Chris Zhong <zyw@rock-chips.com>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Cc: Dawid Kurek <dawikur@gmail.com>

* tag 'drm-misc-next-2017-06-15' of git://anongit.freedesktop.org/git/drm-misc: (26 commits)
  drm: Reduce scope of 'state' variable
  drm: mxsfb_crtc: Reset the eLCDIF controller
  drm: Remove duplicate forward declaration
  drm/panel: s6e3ha2: Add support for s6e3hf2 panel on TM2e board
  dt-bindings: Add support for samsung s6e3hf2 panel
  drm/panel: add backlight dependency for sitronix-st7789v
  drm/panel: S6E3HA2 needs backlight code
  drm/panel: simple: add support for AUO P320HVN03
  drm/panel: simple: add support for NLT NL192108AC18-02D
  dt-bindings: add vendor prefix for NLT Technologies, Ltd.
  drm/panel: simple: add support for NEC NL12880B20-05
  drm/panel: add Innolux P079ZCA panel driver
  dt-bindings: Add INNOLUX P079ZCA panel bindings
  drm/vc4: Fix resource leak in 'vc4_get_hang_state_ioctl()' in error handling path
  drm/vc4/vc4_bo.c: always set bo->resv
  drm: Add const to name field declaration in struct drm_prop_enum_list
  drm/pl111: Fix offset calculation for the primary plane.
  drm/atmel-hlcdc: Fix panel registration
  drm/bridge: Build the panel wrapper in drm_kms_helper
  drm/atmel-hlcdc: Replace the panel usage with drm_panel_bridge.
  ...

Smaller scope reduces visibility of variable and makes usage of
uninitialized variable less possible.

Changes in v2:
	- separate declaration and initialization
Changes in v3:
	- add missing signed-off-by tag
Signed-off-by: Dawid Kurek <dawikur@gmail.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20170615174556.GA8872@gmail.com

According to the eLCDIF initialization steps listed in the MX6SX
Reference Manual the eLCDIF block reset is mandatory.

Without performing the eLCDIF reset the display shows garbage content
when the kernel boots.

In earlier tests this issue has not been observed because the bootloader
was previously showing a splash screen and the bootloader display driver
does properly implement the eLCDIF reset.

Add the eLCDIF reset to the driver, so that it can operate correctly
independently of the bootloader.

Tested on a imx6sx-sdb board.

Cc: <stable@vger.kernel.org>
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Reviewed-by: Marek Vasut <marex@denx.de>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1494007301-14535-1-git-send-email-fabio.estevam@nxp.com

Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

CPU and GPU paths were mostly the same.
Acked-by: Christian König <christian.koenig@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>