- 15 Apr, 2021 2 commits
-
-
Catalin Marinas authored
Merge branches 'for-next/misc', 'for-next/kselftest', 'for-next/xntable', 'for-next/vdso', 'for-next/fiq', 'for-next/epan', 'for-next/kasan-vmalloc', 'for-next/fgt-boot-init', 'for-next/vhe-only' and 'for-next/neon-softirqs-disabled', remote-tracking branch 'arm64/for-next/perf' into for-next/core * for-next/misc: : Miscellaneous patches arm64/sve: Add compile time checks for SVE hooks in generic functions arm64/kernel/probes: Use BUG_ON instead of if condition followed by BUG. arm64/sve: Remove redundant system_supports_sve() tests arm64: mte: Remove unused mte_assign_mem_tag_range() arm64: Add __init section marker to some functions arm64/sve: Rework SVE access trap to convert state in registers docs: arm64: Fix a grammar error arm64: smp: Add missing prototype for some smp.c functions arm64: setup: name `tcr` register arm64: setup: name `mair` register arm64: stacktrace: Move start_backtrace() out of the header arm64: barrier: Remove spec_bar() macro arm64: entry: remove test_irqs_unmasked macro ARM64: enable GENERIC_FIND_FIRST_BIT arm64: defconfig: Use DEBUG_INFO_REDUCED * for-next/kselftest: : Various kselftests for arm64 kselftest: arm64: Add BTI tests kselftest/arm64: mte: Report filename on failing temp file creation kselftest/arm64: mte: Fix clang warning kselftest/arm64: mte: Makefile: Fix clang compilation kselftest/arm64: mte: Output warning about failing compiler kselftest/arm64: mte: Use cross-compiler if specified kselftest/arm64: mte: Fix MTE feature detection kselftest/arm64: mte: common: Fix write() warnings kselftest/arm64: mte: user_mem: Fix write() warning kselftest/arm64: mte: ksm_options: Fix fscanf warning kselftest/arm64: mte: Fix pthread linking kselftest/arm64: mte: Fix compilation with native compiler * for-next/xntable: : Add hierarchical XN permissions for all page tables arm64: mm: use XN table mapping attributes for user/kernel mappings arm64: mm: use XN table mapping attributes for the linear region arm64: mm: add missing P4D definitions and use them consistently * for-next/vdso: : Minor improvements to the compat vdso and sigpage arm64: compat: Poison the compat sigpage arm64: vdso: Avoid ISB after reading from cntvct_el0 arm64: compat: Allow signal page to be remapped arm64: vdso: Remove redundant calls to flush_dcache_page() arm64: vdso: Use GFP_KERNEL for allocating compat vdso and signal pages * for-next/fiq: : Support arm64 FIQ controller registration arm64: irq: allow FIQs to be handled arm64: Always keep DAIF.[IF] in sync arm64: entry: factor irq triage logic into macros arm64: irq: rework root IRQ handler registration arm64: don't use GENERIC_IRQ_MULTI_HANDLER genirq: Allow architectures to override set_handle_irq() fallback * for-next/epan: : Support for Enhanced PAN (execute-only permissions) arm64: Support execute-only permissions with Enhanced PAN * for-next/kasan-vmalloc: : Support CONFIG_KASAN_VMALLOC on arm64 arm64: Kconfig: select KASAN_VMALLOC if KANSAN_GENERIC is enabled arm64: kaslr: support randomized module area with KASAN_VMALLOC arm64: Kconfig: support CONFIG_KASAN_VMALLOC arm64: kasan: abstract _text and _end to KERNEL_START/END arm64: kasan: don't populate vmalloc area for CONFIG_KASAN_VMALLOC * for-next/fgt-boot-init: : Booting clarifications and fine grained traps setup arm64: Require that system registers at all visible ELs be initialized arm64: Disable fine grained traps on boot arm64: Document requirements for fine grained traps at boot * for-next/vhe-only: : Dealing with VHE-only CPUs (a.k.a. M1) arm64: Get rid of CONFIG_ARM64_VHE arm64: Cope with CPUs stuck in VHE mode arm64: cpufeature: Allow early filtering of feature override * arm64/for-next/perf: arm64: perf: Remove redundant initialization in perf_event.c perf/arm_pmu_platform: Clean up with dev_printk perf/arm_pmu_platform: Fix error handling perf/arm_pmu_platform: Use dev_err_probe() for IRQ errors docs: perf: Address some html build warnings docs: perf: Add new description on HiSilicon uncore PMU v2 drivers/perf: hisi: Add support for HiSilicon PA PMU driver drivers/perf: hisi: Add support for HiSilicon SLLC PMU driver drivers/perf: hisi: Update DDRC PMU for programmable counter drivers/perf: hisi: Add new functions for HHA PMU drivers/perf: hisi: Add new functions for L3C PMU drivers/perf: hisi: Add PMU version for uncore PMU drivers. drivers/perf: hisi: Refactor code for more uncore PMUs drivers/perf: hisi: Remove unnecessary check of counter index drivers/perf: Simplify the SMMUv3 PMU event attributes drivers/perf: convert sysfs sprintf family to sysfs_emit drivers/perf: convert sysfs scnprintf family to sysfs_emit_at() and sysfs_emit() drivers/perf: convert sysfs snprintf family to sysfs_emit * for-next/neon-softirqs-disabled: : Run kernel mode SIMD with softirqs disabled arm64: fpsimd: run kernel mode NEON with softirqs disabled arm64: assembler: introduce wxN aliases for wN registers arm64: assembler: remove conditional NEON yield macros
-
Mark Brown authored
The FPSIMD code was relying on IS_ENABLED() checks in system_suppors_sve() to cause the compiler to delete references to SVE functions in some places, add explicit IS_ENABLED() checks back. Fixes: ef9c5d09 ("arm64/sve: Remove redundant system_supports_sve() tests") Reported-by:
kernel test robot <lkp@intel.com> Signed-off-by:
Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/r/20210415121742.36628-1-broonie@kernel.orgSigned-off-by:
Catalin Marinas <catalin.marinas@arm.com>
-
- 13 Apr, 2021 2 commits
-
-
zhouchuangao authored
It can be optimized at compile time. Signed-off-by:
zhouchuangao <zhouchuangao@vivo.com> Reviewed-by:
Masami Hiramatsu <mhiramat@kernel.org> Link: https://lore.kernel.org/r/1617105472-6081-1-git-send-email-zhouchuangao@vivo.comSigned-off-by:
-
Mark Brown authored
Currently there are a number of places in the SVE code where we check both system_supports_sve() and TIF_SVE. This is a bit redundant given that we should never get into a situation where we have set TIF_SVE without having SVE support and it is not clear that silently ignoring a mistakenly set TIF_SVE flag is the most sensible error handling approach. For now let's just drop the system_supports_sve() checks since this will at least reduce overhead a little. Signed-off-by:
-
- 12 Apr, 2021 3 commits
-
-
Ard Biesheuvel authored
Kernel mode NEON can be used in task or softirq context, but only in a non-nesting manner, i.e., softirq context is only permitted if the interrupt was not taken at a point where the kernel was using the NEON in task context. This means all users of kernel mode NEON have to be aware of this limitation, and either need to provide scalar fallbacks that may be much slower (up to 20x for AES instructions) and potentially less safe, or use an asynchronous interface that defers processing to a later time when the NEON is guaranteed to be available. Given that grabbing and releasing the NEON is cheap, we can relax this restriction, by increasing the granularity of kernel mode NEON code, and always disabling softirq processing while the NEON is being used in task context. Signed-off-by:
Ard Biesheuvel <ardb@kernel.org> Acked-by:
Will Deacon <will@kernel.org> Link: https://lore.kernel.org/r/20210302090118.30666-4-ardb@kernel.orgSigned-off-by:
-
Ard Biesheuvel authored
The AArch64 asm syntax has this slightly tedious property that the names used in mnemonics to refer to registers depend on whether the opcode in question targets the entire 64-bits (xN), or only the least significant 8, 16 or 32 bits (wN). When writing parameterized code such as macros, this can be annoying, as macro arguments don't lend themselves to indexed lookups, and so generating a reference to wN in a macro that receives xN as an argument is problematic. For instance, an upcoming patch that modifies the implementation of the cond_yield macro to be able to refer to 32-bit registers would need to modify invocations such as cond_yield 3f, x8 to cond_yield 3f, 8 so that the second argument can be token pasted after x or w to emit the correct register reference. Unfortunately, this interferes with the self documenting nature of the first example, where the second argument is obviously a register, whereas in the second example, one would need to go and look at the code to find out what '8' means. So let's fix this by defining wxN aliases for all xN registers, which resolve to the 32-bit alias of each respective 64-bit register. This allows the macro implementation to paste the xN reference after a w to obtain the correct register name. Signed-off-by:
-
Ard Biesheuvel authored
The users of the conditional NEON yield macros have all been switched to the simplified cond_yield macro, and so the NEON specific ones can be removed. Signed-off-by:
-
- 08 Apr, 2021 9 commits
-
-
Marc Zyngier authored
CONFIG_ARM64_VHE was introduced with ARMv8.1 (some 7 years ago), and has been enabled by default for almost all that time. Given that newer systems that are VHE capable are finally becoming available, and that some systems are even incapable of not running VHE, drop the configuration altogether. Anyone willing to stick to non-VHE on VHE hardware for obscure reasons should use the 'kvm-arm.mode=nvhe' command-line option. Suggested-by:
Marc Zyngier <maz@kernel.org> Acked-by:
-
Marc Zyngier authored
It seems that the CPUs part of the SoC known as Apple M1 have the terrible habit of being stuck with HCR_EL2.E2H==1, in violation of the architecture. Try and work around this deplorable state of affairs by detecting the stuck bit early and short-circuit the nVHE dance. Additional filtering code ensures that attempts at switching to nVHE from the command-line are also ignored. It is still unknown whether there are many more such nuggets to be found... Reported-by:
Hector Martin <marcan@marcan.st> Acked-by:
-
Marc Zyngier authored
Some CPUs are broken enough that some overrides need to be rejected at the earliest opportunity. In some cases, that's right at cpu feature override time. Provide the necessary infrastructure to filter out overrides, and to report such filtered out overrides to the core cpufeature code. Acked-by:
-
Mark Brown authored
Currently we require that software at a higher exception level initialise all registers at the exception level the kernel will be entered prior to starting the kernel in order to ensure that there is nothing uninitialised which could result in an UNKNOWN state while running the kernel. The expectation is that the software running at the highest exception levels will be tightly coupled to the system and can ensure that all available features are appropriately initialised and that the kernel can initialise anything else. There is a gap here in the case where new registers are added to lower exception levels that require initialisation but the kernel does not yet understand them. Extend the requirement to also include exception levels below the one where the kernel is entered to cover this. Suggested-by:
-
Mark Brown authored
The arm64 FEAT_FGT extension introduces a set of traps to EL2 for accesses to small sets of registers and instructions from EL1 and EL0. Currently Linux makes no use of this feature, ensure that it is not active at boot by disabling the traps during EL2 setup. Signed-off-by:
-
Mark Brown authored
The arm64 FEAT_FGT extension introduces a set of traps to EL2 for accesses to small sets of registers and instructions from EL1 and EL0, access to which is controlled by EL3. Require access to it so that it is available to us in future and so that we can ensure these traps are disabled during boot. Signed-off-by:
-
Vincenzo Frascino authored
mte_assign_mem_tag_range() was added in commit 85f49cae ("arm64: mte: add in-kernel MTE helpers") in 5.11 but moved out of mte.S by commit 2cb34276 ("arm64: kasan: simplify and inline MTE functions") in 5.12 and renamed to mte_set_mem_tag_range(). 2cb34276 did not delete the old function prototypes in mte.h. Remove the unused prototype from mte.h. Cc: Will Deacon <will@kernel.org> Reported-by:
Derrick McKee <derrick.mckee@gmail.com> Signed-off-by:
Vincenzo Frascino <vincenzo.frascino@arm.com> Link: https://lore.kernel.org/r/20210407133817.23053-1-vincenzo.frascino@arm.comSigned-off-by:
-
Jisheng Zhang authored
They are not needed after booting, so mark them as __init to move them to the .init section. Signed-off-by:
Jisheng Zhang <Jisheng.Zhang@synaptics.com> Reviewed-by:
Steven Price <steven.price@arm.com> Link: https://lore.kernel.org/r/20210330135449.4dcffd7f@xhacker.debianSigned-off-by:
-
Mark Brown authored
When we enable SVE usage in userspace after taking a SVE access trap we need to ensure that the portions of the register state that are not shared with the FPSIMD registers are zeroed. Currently we do this by forcing the FPSIMD registers to be saved to the task struct and converting them there. This is wasteful in the common case where the task state is loaded into the registers and we will immediately return to userspace since we can initialise the SVE state directly in registers instead of accessing multiple copies of the register state in memory. Instead in that common case do the conversion in the registers and update the task metadata so that we can return to userspace without spilling the register state to memory unless there is some other reason to do so. Signed-off-by:
-
- 01 Apr, 2021 1 commit
-
-
Qi Liu authored
The initialization of value in function armv8pmu_read_hw_counter() and armv8pmu_read_counter() seem redundant, as they are soon updated. So, We can remove them. Signed-off-by:
Qi Liu <liuqi115@huawei.com> Link: https://lore.kernel.org/r/1617275801-1980-1-git-send-email-liuqi115@huawei.comSigned-off-by:
-
- 30 Mar, 2021 5 commits
-
-
Robin Murphy authored
Nearly all of the messages we can log from the platform device code relate to the specific PMU device and the properties we're parsing from its DT node. In some cases we use %pOF to point at where something was wrong, but even that is inconsistent. Let's convert these logs to the appropriate dev_printk variants, so that every issue specific to the device and/or its DT description is clearly and instantly attributable, particularly if there is more than one PMU node present in the DT. The local refactoring in a couple of functions invites some extra cleanup in the process - the init_fn matching can be streamlined, and the PMU registration failure message moved to the appropriate place and log level. CC: Tian Tao <tiantao6@hisilicon.com> Signed-off-by:
Robin Murphy <robin.murphy@arm.com> Link: https://lore.kernel.org/r/10a4aacdf071d0c03d061c408a5899e5b32cc0a6.1616774562.git.robin.murphy@arm.comSigned-off-by:
-
Robin Murphy authored
If we're aborting after failing to register the PMU device, we probably don't want to leak the IRQs that we've claimed. Signed-off-by:
-
Robin Murphy authored
By virtue of using platform_irq_get_optional() under the covers, platform_irq_count() needs the target interrupt controller to be available and may return -EPROBE_DEFER if it isn't. Let's use dev_err_probe() to avoid a spurious error log (and help debug any deferral issues) in that case. Reported-by:
Paul Menzel <pmenzel@molgen.mpg.de> Signed-off-by:
-
Qi Liu authored
Fix following html build warnings: Documentation/admin-guide/perf/hisi-pmu.rst:61: WARNING: Unexpected indentation. Documentation/admin-guide/perf/hisi-pmu.rst:62: WARNING: Block quote ends without a blank line; unexpected unindent. Documentation/admin-guide/perf/hisi-pmu.rst:69: WARNING: Unexpected indentation. Documentation/admin-guide/perf/hisi-pmu.rst:70: WARNING: Block quote ends without a blank line; unexpected unindent. Documentation/admin-guide/perf/hisi-pmu.rst:83: WARNING: Unexpected indentation. Fixes: 9b86b1b4 ("docs: perf: Add new description on HiSilicon uncore PMU v2") Reported-by:
Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by:
-
He Ying authored
depending -> depending on Reported-by:
Hulk Robot <hulkci@huawei.com> Signed-off-by:
He Ying <heying24@huawei.com> Link: https://lore.kernel.org/r/20210330085817.86185-1-heying24@huawei.comSigned-off-by:
-
- 29 Mar, 2021 6 commits
-
-
Lecopzer Chen authored
Before this patch, someone who wants to use VMAP_STACK when KASAN_GENERIC enabled must explicitly select KASAN_VMALLOC. >From Will's suggestion [1]: > I would _really_ like to move to VMAP stack unconditionally, and > that would effectively force KASAN_VMALLOC to be set if KASAN is in use Because VMAP_STACK now depends on either HW_TAGS or KASAN_VMALLOC if KASAN enabled, in order to make VMAP_STACK selected unconditionally, we bind KANSAN_GENERIC and KASAN_VMALLOC together. Note that SW_TAGS supports neither VMAP_STACK nor KASAN_VMALLOC now, so this is the first step to make VMAP_STACK selected unconditionally. Bind KANSAN_GENERIC and KASAN_VMALLOC together is supposed to cost more memory at runtime, thus the alternative is using SW_TAGS KASAN instead. [1]: https://lore.kernel.org/lkml/20210204150100.GE20815@willie-the-truck/Suggested-by:
Lecopzer Chen <lecopzer.chen@mediatek.com> Link: https://lore.kernel.org/r/20210324040522.15548-6-lecopzer.chen@mediatek.comSigned-off-by:
-
Lecopzer Chen authored
After KASAN_VMALLOC works in arm64, we can randomize module region into vmalloc area now. Test: VMALLOC area ffffffc010000000 fffffffdf0000000 before the patch: module_alloc_base/end ffffffc008b80000 ffffffc010000000 after the patch: module_alloc_base/end ffffffdcf4bed000 ffffffc010000000 And the function that insmod some modules is fine. Suggested-by:
-
Lecopzer Chen authored
We can backed shadow memory in vmalloc area after vmalloc area isn't populated at kasan_init(), thus make KASAN_VMALLOC selectable. Signed-off-by:
Andrey Konovalov <andreyknvl@gmail.com> Tested-by:
-
Lecopzer Chen authored
Arm64 provides defined macro for KERNEL_START and KERNEL_END, thus replace them by the abstration instead of using _text and _end. Signed-off-by:
-
Lecopzer Chen authored
Linux support KAsan for VMALLOC since commit 3c5c3cfb ("kasan: support backing vmalloc space with real shadow memory") Like how the MODULES_VADDR does now, just not to early populate the VMALLOC_START between VMALLOC_END. Before: MODULE_VADDR: no mapping, no zero shadow at init VMALLOC_VADDR: backed with zero shadow at init After: MODULE_VADDR: no mapping, no zero shadow at init VMALLOC_VADDR: no mapping, no zero shadow at init Thus the mapping will get allocated on demand by the core function of KASAN_VMALLOC. ----------- vmalloc_shadow_start | | | | | | <= non-mapping | | | | |-----------| |///////////|<- kimage shadow with page table mapping. |-----------| | | | | <= non-mapping | | ------------- vmalloc_shadow_end |00000000000| |00000000000| <= Zero shadow |00000000000| ------------- KASAN_SHADOW_END Signed-off-by:
-
Chen Lifu authored
In commit eb631bb5 ("arm64: Support arch_irq_work_raise() via self IPIs") a new function "arch_irq_work_raise" was added without a prototype. In commit d914d4d4 ("arm64: Implement panic_smp_self_stop()") a new function "panic_smp_self_stop" was added without a prototype. We get the following warnings on W=1: arch/arm64/kernel/smp.c:842:6: warning: no previous prototype for ‘arch_irq_work_raise’ [-Wmissing-prototypes] arch/arm64/kernel/smp.c:862:6: warning: no previous prototype for ‘panic_smp_self_stop’ [-Wmissing-prototypes] Fix the warnings by: 1. Adding the prototype for 'arch_irq_work_raise' in irq_work.h 2. Adding the prototype for 'panic_smp_self_stop' in smp.h Signed-off-by:
Chen Lifu <chenlifu@huawei.com> Link: https://lore.kernel.org/r/20210329034343.183974-1-chenlifu@huawei.comSigned-off-by:
-
- 28 Mar, 2021 3 commits
-
-
Mark Rutland authored
In __cpu_setup we conditionally manipulate the TCR_EL1 value in x10 after previously using x10 as a scratch register for unrelated temporary variables. To make this a bit clearer, let's move the TCR_EL1 value into a named register `tcr`. To simplify the register allocation, this is placed in the highest available caller-saved scratch register, tcr. Following the example of `mair`, we initialise the register with the default value prior to any feature discovery, and write it to MAIR_EL1 after all feature discovery is complete, which allows us to simplify the featuere discovery code. The existing `mte_tcr` register is no longer needed, and is replaced by the use of x10 as a temporary, matching the rest of the MTE feature discovery assembly in __cpu_setup. As x20 is no longer used, the function is now AAPCS compliant, as we've generally aimed for in our assembly functions. There should be no functional change as as a result of this patch. Signed-off-by:
Mark Rutland <mark.rutland@arm.com> Cc: Marc Zyngier <maz@kernel.org> Cc: Will Deacon <will@kernel.org> Link: https://lore.kernel.org/r/20210326180137.43119-3-mark.rutland@arm.comSigned-off-by:
-
Mark Rutland authored
In __cpu_setup we conditionally manipulate the MAIR_EL1 value in x5 before later reusing x5 as a scratch register for unrelated temporary variables. To make this a bit clearer, let's move the MAIR_EL1 value into a named register `mair`. To simplify the register allocation, this is placed in the highest available caller-saved scratch register, x17. As it is no longer clobbered by other usage, we can write the value to MAIR_EL1 at the end of the function as we do for TCR_EL1 rather than part-way though feature discovery. There should be no functional change as as a result of this patch. Signed-off-by:
-
Mark Brown authored
Currently start_backtrace() is a static inline function in the header. Since it really shouldn't be sufficiently performance critical that we actually need to have it inlined move it into a C file, this will save anyone else scratching their head about why it is defined in the header. As far as I can see it's only there because it was factored out of the various callers. Signed-off-by:
-
- 26 Mar, 2021 1 commit
-
-
Vladimir Murzin authored
Enhanced Privileged Access Never (EPAN) allows Privileged Access Never to be used with Execute-only mappings. Absence of such support was a reason for 24cecc37 ("arm64: Revert support for execute-only user mappings"). Thus now it can be revisited and re-enabled. Cc: Kees Cook <keescook@chromium.org> Signed-off-by:
Vladimir Murzin <vladimir.murzin@arm.com> Acked-by:
-
- 25 Mar, 2021 8 commits
-
-
Linus Walleij authored
The spec_bar() macro was introduced in commit bd4fb6d2 ("arm64: Add support for SB barrier and patch in over DSB; ISB sequences") as a way for C to insert a speculation barrier and was then used in one single place: set_fs(). Later on commit 3d2403fd ("arm64: uaccess: remove set_fs()") deleted set_fs() altogether and as noted in the commit on the new path the regular sb() assembly macro will be used. Delete the remnant. Cc: Mark Rutland <mark.rutland@arm.com> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Acked-by:
-
Shaokun Zhang authored
Some news functions are added on HiSilicon uncore PMUs. Document them to provide guidance on how to use them. Cc: Mark Rutland <mark.rutland@arm.com> Cc: Will Deacon <will@kernel.org> Cc: John Garry <john.garry@huawei.com> Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by:
John Garry <john.garry@huawei.com> Co-developed-by:
Shaokun Zhang <zhangshaokun@hisilicon.com> Link: https://lore.kernel.org/r/1615186237-22263-10-git-send-email-zhangshaokun@hisilicon.comSigned-off-by:
-
Shaokun Zhang authored
On HiSilicon Hip09 platform, there is a PA (Protocol Adapter) module on each chip SICL (Super I/O Cluster) which incorporates three Hydra interface and facilitates the cache coherency between the dies on the chip. While PA uncore PMU model is the same as other Hip09 PMU modules and many PMU events are supported. Let's support the PMU driver using the HiSilicon uncore PMU framework. PA PMU supports the following filter functions: * tracetag_en: allows user to count events according to tt_req or tt_core set in L3C PMU. It's the same as other PMUs. * srcid_cmd & srcid_msk: allows user to filter statistics that come from specific CCL/ICL by configuration source ID. * tgtid_cmd & tgtid_msk: it is the similar function to srcid_cmd & srcid_msk. Both are used to check where the data comes from or go to. Cc: Mark Rutland <mark.rutland@arm.com> Cc: Will Deacon <will@kernel.org> Cc: John Garry <john.garry@huawei.com> Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by:
-
Shaokun Zhang authored
HiSilicon's Hip09 is comprised by multi-dies that can be connected by SLLC module (Skyros Link Layer Controller), its has separate PMU registers which the driver can program it freely and interrupt is supported to handle counter overflow. Let's support its driver under the framework of HiSilicon uncore PMU driver. SLLC PMU supports the following filter functions: * tracetag_en: allows user to count data according to tt_req or tt_core set in L3C PMU. * srcid_cmd & srcid_msk: allows user to filter statistics that come from specific CCL/ICL by configuration source ID. * tgtid_hi & tgtid_lo: it also supports event statistics that these operations will go to the CCL/ICL by configuration target ID or target ID range. It's the same as source ID with 11-bit width in the SoC. More introduction is added in documentation: Documentation/admin-guide/perf/hisi-pmu.rst Cc: Mark Rutland <mark.rutland@arm.com> Cc: Will Deacon <will@kernel.org> Cc: John Garry <john.garry@huawei.com> Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by:
-
Shaokun Zhang authored
DDRC PMU's events are useful for performance profiling, but the events are limited and counter is fixed. On HiSilicon Hip09 platform, PMU counters are the programmable and more events are supported. Let's add the DDRC PMU v2 driver. Bandwidth events are exposed directly in driver and some more events will listed in JSON file later. Cc: Mark Rutland <mark.rutland@arm.com> Cc: Will Deacon <will@kernel.org> Cc: John Garry <john.garry@huawei.com> Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by:
-
Shaokun Zhang authored
On HiSilicon Hip09 platform, some new functions are also supported on HHA PMU. * tracetag_en: it is the abbreviation of tracetag enable and allows user to count events according to tt_req or tt_core set in L3C PMU. * datasrc_skt: it is the abbreviation of data source from another socket and it is used in the multi-chips. It's the same as L3C PMU. * srcid_cmd & srcid_msk: pair of the fields are used to filter statistics that come from the specific CCL/ICL by the configuration. These are the abbreviation of source ID command and mask. The source ID is 11-bit and detailed descriptions are documented in Documentation/admin-guide/perf/hisi-pmu.rst. Cc: Mark Rutland <mark.rutland@arm.com> Cc: Will Deacon <will@kernel.org> Cc: John Garry <john.garry@huawei.com> Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by:
-
Shaokun Zhang authored
On HiSilicon Hip09 platform, some new functions are enhanced on L3C PMU: * tt_req: it is the abbreviation of tracetag request and allows user to count only read/write/atomic operations. tt_req is 3-bit and details are listed in the hisi-pmu document. $# perf stat -a -e hisi_sccl3_l3c0/config=0x02,tt_req=0x4/ sleep 5 * tt_core: it is the abbreviation of tracetag core and allows user to filter by core/thread within the cluster, it is a 8-bit bitmap that each bit represents the corresponding core/thread in this L3C. $# perf stat -a -e hisi_sccl3_l3c0/config=0x02,tt_core=0xf/ sleep 5 * datasrc_cfg: it is the abbreviation of data source configuration and allows user to check where the data comes from, such as: from local DDR, cross-die DDR or cross-socket DDR. Its is 5-bit and represents different data source in the SoC. $# perf stat -a -e hisi_sccl3_l3c0/dat_access,datasrc_cfg=0xe/ sleep 5 * datasrc_skt: it is the abbreviation of data source from another socket and is used in the multi-chips, if user wants to check the cross-socket datat source, it shall be added in perf command. Only one bit is used to control this. $# perf stat -a -e hisi_sccl3_l3c0/dat_access,datasrc_cfg=0x10,datasrc_skt=1/ sleep 5 Cc: Mark Rutland <mark.rutland@arm.com> Cc: Will Deacon <will@kernel.org> Cc: John Garry <john.garry@huawei.com> Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by:
-
Shaokun Zhang authored
For HiSilicon uncore PMU, more versions are supported and some variables shall be added suffix to distinguish the version which are prepared for the new drivers. Cc: Mark Rutland <mark.rutland@arm.com> Cc: Will Deacon <will@kernel.org> Cc: John Garry <john.garry@huawei.com> Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com> Acked-by:
-
