If rq_state == ARRAY_SIZE() then we read one element beyond the end of
the blk_mq_rq_state_name_array[] array.

Fixes: ec6dcf63 ("blk-mq-debugfs: Show more request state information")
Reviewed-by: Bart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Commit 0ba99ca4 ("block: Add warning for bi_next not NULL in
bio_endio()") breaks the dm driver. end_clone_bio() detects whether
or not a bio is the last bio associated with a request by checking
the .bi_next field. Commit 0ba99ca4 clears that field before
end_clone_bio() has had a chance to inspect that field. Hence revert
commit 0ba99ca4.

This patch avoids that KASAN reports the following complaint when
running the srp-test software (srp-test/run_tests -c -d -r 10 -t 02-mq):

==================================================================
BUG: KASAN: use-after-free in bio_advance+0x11b/0x1d0
Read of size 4 at addr ffff8801300e06d0 by task ksoftirqd/0/9

CPU: 0 PID: 9 Comm: ksoftirqd/0 Not tainted 4.18.0-rc1-dbg+ #1
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.0.0-prebuilt.qemu-project.org 04/01/2014
Call Trace:
 dump_stack+0xa4/0xf5
 print_address_description+0x6f/0x270
 kasan_report+0x241/0x360
 __asan_load4+0x78/0x80
 bio_advance+0x11b/0x1d0
 blk_update_request+0xa7/0x5b0
 scsi_end_request+0x56/0x320 [scsi_mod]
 scsi_io_completion+0x7d6/0xb20 [scsi_mod]
 scsi_finish_command+0x1c0/0x280 [scsi_mod]
 scsi_softirq_done+0x19a/0x230 [scsi_mod]
 blk_mq_complete_request+0x160/0x240
 scsi_mq_done+0x50/0x1a0 [scsi_mod]
 srp_recv_done+0x515/0x1330 [ib_srp]
 __ib_process_cq+0xa0/0xf0 [ib_core]
 ib_poll_handler+0x38/0xa0 [ib_core]
 irq_poll_softirq+0xe8/0x1f0
 __do_softirq+0x128/0x60d
 run_ksoftirqd+0x3f/0x60
 smpboot_thread_fn+0x352/0x460
 kthread+0x1c1/0x1e0
 ret_from_fork+0x24/0x30

Allocated by task 1918:
 save_stack+0x43/0xd0
 kasan_kmalloc+0xad/0xe0
 kasan_slab_alloc+0x11/0x20
 kmem_cache_alloc+0xfe/0x350
 mempool_alloc_slab+0x15/0x20
 mempool_alloc+0xfb/0x270
 bio_alloc_bioset+0x244/0x350
 submit_bh_wbc+0x9c/0x2f0
 __block_write_full_page+0x299/0x5a0
 block_write_full_page+0x16b/0x180
 blkdev_writepage+0x18/0x20
 __writepage+0x42/0x80
 write_cache_pages+0x376/0x8a0
 generic_writepages+0xbe/0x110
 blkdev_writepages+0xe/0x10
 do_writepages+0x9b/0x180
 __filemap_fdatawrite_range+0x178/0x1c0
 file_write_and_wait_range+0x59/0xc0
 blkdev_fsync+0x46/0x80
 vfs_fsync_range+0x66/0x100
 do_fsync+0x3d/0x70
 __x64_sys_fsync+0x21/0x30
 do_syscall_64+0x77/0x230
 entry_SYSCALL_64_after_hwframe+0x49/0xbe

Freed by task 9:
 save_stack+0x43/0xd0
 __kasan_slab_free+0x137/0x190
 kasan_slab_free+0xe/0x10
 kmem_cache_free+0xd3/0x380
 mempool_free_slab+0x17/0x20
 mempool_free+0x63/0x160
 bio_free+0x81/0xa0
 bio_put+0x59/0x60
 end_bio_bh_io_sync+0x5d/0x70
 bio_endio+0x1a7/0x360
 blk_update_request+0xd0/0x5b0
 end_clone_bio+0xa3/0xd0 [dm_mod]
 bio_endio+0x1a7/0x360
 blk_update_request+0xd0/0x5b0
 scsi_end_request+0x56/0x320 [scsi_mod]
 scsi_io_completion+0x7d6/0xb20 [scsi_mod]
 scsi_finish_command+0x1c0/0x280 [scsi_mod]
 scsi_softirq_done+0x19a/0x230 [scsi_mod]
 blk_mq_complete_request+0x160/0x240
 scsi_mq_done+0x50/0x1a0 [scsi_mod]
 srp_recv_done+0x515/0x1330 [ib_srp]
 __ib_process_cq+0xa0/0xf0 [ib_core]
 ib_poll_handler+0x38/0xa0 [ib_core]
 irq_poll_softirq+0xe8/0x1f0
 __do_softirq+0x128/0x60d

The buggy address belongs to the object at ffff8801300e0640
 which belongs to the cache bio-0 of size 200
The buggy address is located 144 bytes inside of
 200-byte region [ffff8801300e0640, ffff8801300e0708)
The buggy address belongs to the page:
page:ffffea0004c03800 count:1 mapcount:0 mapping:ffff88015a563a00 index:0x0 compound_mapcount: 0
flags: 0x8000000000008100(slab|head)
raw: 8000000000008100 dead000000000100 dead000000000200 ffff88015a563a00
raw: 0000000000000000 0000000000330033 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected

Memory state around the buggy address:
 ffff8801300e0580: fb fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc
 ffff8801300e0600: fc fc fc fc fc fc fc fc fb fb fb fb fb fb fb fb
>ffff8801300e0680: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
                                                 ^
 ffff8801300e0700: fb fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
 ffff8801300e0780: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
==================================================================

Cc: Kent Overstreet <kent.overstreet@gmail.com>
Fixes: 0ba99ca4 ("block: Add warning for bi_next not NULL in bio_endio()")
Acked-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

blk_mq_complete_request can only be called for blk-mq drivers, but when
removing the BLK_EH_HANDLED return value, two legacy request timeout
methods incorrectly got switched to call blk_mq_complete_request.
Call __blk_complete_request instead to reinstance the previous behavior.
For that __blk_complete_request needs to be exported.

Fixes: 1fc2b62e ("scsi_transport_fc: complete requests from ->timeout")
Fixes: 0df0bb08 ("null_blk: complete requests from ->timeout")
Reported-by: Jianchao Wang <jianchao.w.wang@oracle.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

The existing implementation allows races between bsg_unregister and
bsg_open paths. bsg_unregister and request_queue cleanup and deletion
may start and complete right after bsg_get_device (in bsg_open path)
retrieves bsg_class_device and releases the mutex. Then bsg_open path
touches freed memory of bsg_class_device and request_queue.

One possible fix is to hold the mutex all the way through bsg_get_device
instead of releasing it after bsg_class_device retrieval.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-Off-By: Anatoliy Glagolev <glagolig@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

This function is entirely unused, so remove it and the tag_queue_busy
member of struct request_queue.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Pull NVMe fixes from Christoph:

"Fix various little regressions introduced in this merge window, plus
 a rework of the fibre channel connect and reconnect path to share the
 code instead of having separate sets of bugs. Last but not least a
 trivial trace point addition from Hannes."

* 'nvme-4.18' of git://git.infradead.org/nvme:
  nvme-fabrics: fix and refine state checks in __nvmf_check_ready
  nvme-fabrics: handle the admin-only case properly in nvmf_check_ready
  nvme-fabrics: refactor queue ready check
  blk-mq: remove blk_mq_tagset_iter
  nvme: remove nvme_reinit_tagset
  nvme-fc: fix nulling of queue data on reconnect
  nvme-fc: remove reinit_request routine
  nvme-fc: change controllers first connect to use reconnect path
  nvme: don't rely on the changed namespace list log
  nvmet: free smart-log buffer after use
  nvme-rdma: fix error flow during mapping request data
  nvme: add bio remapping tracepoint
  nvme: fix NULL pointer dereference in nvme_init_subsystem

 - make sure we only allow internally generates commands in any non-live
   state
 - only allow connect commands on non-live queues when actually in the
   new or connecting states
 - treat all other non-live, non-dead states the same as a default
   cach-all

This fixes a regression where we could not shutdown a controller
orderly as we didn't allow the internal generated Property Set
command, and also ensures we don't accidentally let a Connect command
through in the wrong state.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: James Smart <james.smart@broadcom.com>

In the ADMIN_ONLY state we don't have any I/O queues, but we should accept
all admin commands without further checks.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by:  James Smart <james.smart@broadcom.com>

Move the is_connected check to the fibre channel transport, as it has no
meaning for other transports.  To facilitate this split out a new
nvmf_fail_nonready_command helper that is called by the transport when
it is asked to handle a command on a queue that is not ready.

Also avoid a function call for the queue live fast path by inlining
the check.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: James Smart <james.smart@broadcom.com>

Unused now that nvme stopped using it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jens Axboe <axboe@kernel.dk>

Unused now that all transports stopped using it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jens Axboe <axboe@kernel.dk>

The reconnect path is calling the init routines to clear a queue
structure. But the queue structure has state that perhaps needs
to persist as long as the controller is live.

Remove the nvme_fc_init_queue() calls on reconnect.
The nvme_fc_free_queue() calls will clear state bits and reset
any relevant queue state for a new connection.
Signed-off-by: James Smart <james.smart@broadcom.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>

The reinit_request routine is not necessary. Remove support for the
op callback.

As all that nvme_reinit_tagset() does is itterate and call the
reinit routine, it too has no purpose. Remove the call.
Signed-off-by: James Smart <james.smart@broadcom.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>

We can currently call the timeout handler again on a request that has
already been handed over to the timeout handler.  Prevent that with a new
flag.

Fixes: 12f5b931 ("blk-mq: Remove generation seqeunce")
Reported-by: Andrew Randrianasulu <randrianasulu@gmail.com>
Tested-by: Andrew Randrianasulu <randrianasulu@gmail.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Current code follows the framework that has been in the transports
from the beginning where initial link-side controller connect occurs
as part of "creating the controller". Thus that first connect fully
talks to the controller and obtains values that can then be used in
for blk-mq setup, etc. It also means that everything about the
controller is fully know before the "create controller" call returns.

This has several weaknesses:
- The initial create_ctrl call made by the cli will block for a long
  time as wire transactions are performed synchronously. This delay
  becomes longer if errors occur or connectivity is lost and retries
  need to be performed.
- Code wise, it means there is a separate connect path for initial
  controller connect vs the (same) steps used in the reconnect path.
- And as there's separate paths, it means there's separate error
  handling and retry logic. It also plays havoc with the NEW state
  (should transition out of it after successful initial connect) vs
  the RESETTING and CONNECTING (reconnect) states that want to be
  transitioned to on error.
- As there's separate paths, to recover from errors and disruptions,
  it requires separate recovery/retry paths as well and can severely
  convolute the controller state.

This patch reworks the fc transport to use the same connect paths
for the initial connection as it uses for reconnect. This makes a
single path for error recovery and handling.

This patch:
- Removes the driving of the initial connect and replaces it with
  a state transition to CONNECTING and initiating the reconnect
  thread. A dummy state transition of RESETTING had to be traversed
  as a direct transtion of NEW->CONNECTING is not allowed. Given
  that the controller is "new", the RESETTING transition is a simple
  no-op. Once in the reconnecting thread, the normal behaviors of
  ctrl_loss_tmo (max_retries * connect_delay) and dev_loss_tmo will
  apply before the controller is torn down.
- Only if the state transitions couldn't be traversed and the
  reconnect thread not scheduled, will the controller be torn down
  while in create_ctrl.
- The prior code used the controller state of NEW to indicate
  whether request queues had been initialized or not. For the admin
  queue, the request queue is always created, so there's no need to
  check a state. For IO queues, change to tracking whether a successful
  io request queue create has occurred (e.g. 1st successful connect).
- The initial controller id is initialized to the dynamic controller
  id used in the initial connect message. It will be overwritten by
  the real controller id once the controller is connected on the wire.
Signed-off-by: James Smart <james.smart@broadcom.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>

Don't optimize our namespace rescan based on the changed namespace list
log page as userspace might have changed the content through reading
it.
Suggested-by: Keith Busch <keith.busch@linux.intel.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <keith.busch@linux.intel.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>

Free smart-log buffer allocated in the function after use.
Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>

After dma mapping the sgl, we map the sgl to nvme sgl descriptor. In case
of failure during the last mapping we never dma unmap the sgl.
Signed-off-by: Max Gurtovoy <maxg@mellanox.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>

Adding a tracepoint to trace bio remapping for native nvme multipath.
Signed-off-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>

When using nvme-pci driver the nvmf_ctrl_options is NULL.
There is no need to check for discovery_nqn flag at non-fabrics controller.

Fixes: 181303d0 ("nvme-fabrics: allow duplicate connections to the discovery controller")
Signed-off-by: Israel Rukshin <israelr@mellanox.com>
Reviewed-by: Max Gurtovoy <maxg@mellanox.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>

It is not allowed to reinit q->tag_set_list list entry while RCU grace
period has not completed yet, otherwise the following soft lockup in
blk_mq_sched_restart() happens:

[ 1064.252652] watchdog: BUG: soft lockup - CPU#12 stuck for 23s! [fio:9270]
[ 1064.254445] task: ffff99b912e8b900 task.stack: ffffa6d54c758000
[ 1064.254613] RIP: 0010:blk_mq_sched_restart+0x96/0x150
[ 1064.256510] Call Trace:
[ 1064.256664]  <IRQ>
[ 1064.256824]  blk_mq_free_request+0xea/0x100
[ 1064.256987]  msg_io_conf+0x59/0xd0 [ibnbd_client]
[ 1064.257175]  complete_rdma_req+0xf2/0x230 [ibtrs_client]
[ 1064.257340]  ? ibtrs_post_recv_empty+0x4d/0x70 [ibtrs_core]
[ 1064.257502]  ibtrs_clt_rdma_done+0xd1/0x1e0 [ibtrs_client]
[ 1064.257669]  ib_create_qp+0x321/0x380 [ib_core]
[ 1064.257841]  ib_process_cq_direct+0xbd/0x120 [ib_core]
[ 1064.258007]  irq_poll_softirq+0xb7/0xe0
[ 1064.258165]  __do_softirq+0x106/0x2a2
[ 1064.258328]  irq_exit+0x92/0xa0
[ 1064.258509]  do_IRQ+0x4a/0xd0
[ 1064.258660]  common_interrupt+0x7a/0x7a
[ 1064.258818]  </IRQ>

Meanwhile another context frees other queue but with the same set of
shared tags:

[ 1288.201183] INFO: task bash:5910 blocked for more than 180 seconds.
[ 1288.201833] bash            D    0  5910   5820 0x00000000
[ 1288.202016] Call Trace:
[ 1288.202315]  schedule+0x32/0x80
[ 1288.202462]  schedule_timeout+0x1e5/0x380
[ 1288.203838]  wait_for_completion+0xb0/0x120
[ 1288.204137]  __wait_rcu_gp+0x125/0x160
[ 1288.204287]  synchronize_sched+0x6e/0x80
[ 1288.204770]  blk_mq_free_queue+0x74/0xe0
[ 1288.204922]  blk_cleanup_queue+0xc7/0x110
[ 1288.205073]  ibnbd_clt_unmap_device+0x1bc/0x280 [ibnbd_client]
[ 1288.205389]  ibnbd_clt_unmap_dev_store+0x169/0x1f0 [ibnbd_client]
[ 1288.205548]  kernfs_fop_write+0x109/0x180
[ 1288.206328]  vfs_write+0xb3/0x1a0
[ 1288.206476]  SyS_write+0x52/0xc0
[ 1288.206624]  do_syscall_64+0x68/0x1d0
[ 1288.206774]  entry_SYSCALL_64_after_hwframe+0x3d/0xa2

What happened is the following:

1. There are several MQ queues with shared tags.
2. One queue is about to be freed and now task is in
   blk_mq_del_queue_tag_set().
3. Other CPU is in blk_mq_sched_restart() and loops over all queues in
   tag list in order to find hctx to restart.

Because linked list entry was modified in blk_mq_del_queue_tag_set()
without proper waiting for a grace period, blk_mq_sched_restart()
never ends, spining in list_for_each_entry_rcu_rr(), thus soft lockup.

Fix is simple: reinit list entry after an RCU grace period elapsed.

Fixes: Fixes: 705cda97 ("blk-mq: Make it safe to use RCU to iterate over blk_mq_tag_set.tag_list")
Cc: stable@vger.kernel.org
Cc: Sagi Grimberg <sagi@grimberg.me>
Cc: linux-block@vger.kernel.org
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Bart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: Roman Pen <roman.penyaev@profitbricks.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Pull networking fixes from David Miller:

 1) Fix several bpfilter/UMH bugs, in particular make the UMH build not
    depend upon X86 specific Kconfig symbols. From Alexei Starovoitov.

 2) Fix handling of modified context pointer in bpf verifier, from
    Daniel Borkmann.

 3) Kill regression in ifdown/ifup sequences for hv_netvsc driver, from
    Dexuan Cui.

 4) When the bonding primary member name changes, we have to re-evaluate
    the bond->force_primary setting, from Xiangning Yu.

 5) Eliminate possible padding beyone end of SKB in cdc_ncm driver, from
    Bjørn Mork.

 6) RX queue length reported for UDP sockets in procfs and socket diag
    are inaccurate, from Paolo Abeni.

 7) Fix br_fdb_find_port() locking, from Petr Machata.

 8) Limit sk_rcvlowat values properly in TCP, from Soheil Hassas
    Yeganeh.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (23 commits)
  tcp: limit sk_rcvlowat by the maximum receive buffer
  net: phy: dp83822: use BMCR_ANENABLE instead of BMSR_ANEGCAPABLE for DP83620
  socket: close race condition between sock_close() and sockfs_setattr()
  net: bridge: Fix locking in br_fdb_find_port()
  udp: fix rx queue len reported by diag and proc interface
  cdc_ncm: avoid padding beyond end of skb
  net/sched: act_simple: fix parsing of TCA_DEF_DATA
  net: fddi: fix a possible null-ptr-deref
  net: aquantia: fix unsigned numvecs comparison with less than zero
  net: stmmac: fix build failure due to missing COMMON_CLK dependency
  bpfilter: fix race in pipe access
  bpf, xdp: fix crash in xdp_umem_unaccount_pages
  xsk: Fix umem fill/completion queue mmap on 32-bit
  tools/bpf: fix selftest get_cgroup_id_user
  bpfilter: fix OUTPUT_FORMAT
  umh: fix race condition
  net: mscc: ocelot: Fix uninitialized error in ocelot_netdevice_event()
  bonding: re-evaluate force_primary when the primary slave name changes
  ip_tunnel: Fix name string concatenate in __ip_tunnel_create()
  hv_netvsc: Fix a network regression after ifdown/ifup
  ...

Pull RTC updates from Alexandre Belloni:
 "Setting the supported range from drivers for RTCs failing soon has
  started. A few fixes are developed along the way. Some drivers have
  been switched to SPDX by their maintainers.

  Subsystem:

   - rework of the rtc-test driver which allows to test the core more
     thoroughly

   - rtc_set_alarm() now fails early when alarms are not supported

  Drivers:

   - mktime() is now replaced by mktime64()

   - RTC range added for 88pm80x, ab-b5ze-s3, at91rm9200,
     brcmstb-waketimer, ds1685, ftrtc010, ls1x, mxc_v2, rx8581, sprd,
     st-lpc, tps6586x, tps65910 and vr41xx

   - fixed a possible race condition in probe functions

   - pxa: fix the probe function that is broken since v4.3

   - stm32: now supports stm32mp1"

* tag 'rtc-4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (78 commits)
  rtc: pxa: fix probe function
  rtc: cros-ec: Switch to SPDX identifier.
  rtc: cros-ec: Make license text and module license match.
  rtc: ensure rtc_set_alarm fails when alarms are not supported
  rtc: test: remove alarm support from the first device
  rtc: test: convert to devm_rtc_allocate_device
  rtc: ftrtc010: let the core handle range
  rtc: ftrtc010: handle dates after 2106
  rtc: ftrtc010: switch to devm_rtc_allocate_device
  rtc: mrst: switch to devm functions
  rtc: sunxi: fix possible race condition
  rtc: test: remove irq sysfs file
  rtc: test: emulate alarms using timers
  rtc: test: store time as an offset to system time
  rtc: test: allow registering many devices
  rtc: test: remove useless proc info
  rtc: ds1685: Add range
  rtc: ds1685: fix possible race condition
  rtc: sprd: Add new RTC power down check method
  rtc: sun6i: Fix bit_idx value for clk_register_gate
  ...

Pull UBI and UBIFS updates from Richard Weinberger:

 - the UBI on-disk format header file is now dual licensed

 - new way to detect Fastmap problems during runtime

 - bugfix for Fastmap

 - minor updates for UBIFS (spelling, comments, vm_fault_t, ...)

* tag 'upstream-4.18-rc1' of git://git.infradead.org/linux-ubifs:
  mtd: ubi: Update ubi-media.h to dual license
  ubi: fastmap: Detect EBA mismatches on-the-fly
  ubi: fastmap: Check each mapping only once
  ubi: fastmap: Correctly handle interrupted erasures in EBA
  ubi: fastmap: Cancel work upon detach
  ubifs: lpt: Fix wrong pnode number range in comment
  ubifs: gc: Fix typo
  ubifs: log: Some spelling fixes
  ubifs: Spelling fix someting -> something
  ubifs: journal: Remove wrong comment
  ubifs: remove set but never used variable
  ubifs, xattr: remove misguided quota flags
  fs: ubifs: Adding new return type vm_fault_t

The user-provided value to setsockopt(SO_RCVLOWAT) can be
larger than the maximum possible receive buffer. Such values
mute POLLIN signals on the socket which can stall progress
on the socket.

Limit the user-provided value to half of the maximum receive
buffer, i.e., half of sk_rcvbuf when the receive buffer size
is set by the user, or otherwise half of sysctl_tcp_rmem[2].

Fixes: d1361840 ("tcp: fix SO_RCVLOWAT and RCVBUF autotuning")
Signed-off-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Neal Cardwell <ncardwell@google.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull SCSI updates from James Bottomley:
 "This is mostly updates to the usual drivers: ufs, qedf, mpt3sas, lpfc,
  xfcp, hisi_sas, cxlflash, qla2xxx.

  In the absence of Nic, we're also taking target updates which are
  mostly minor except for the tcmu refactor.

  The only real core change to worry about is the removal of high page
  bouncing (in sas, storvsc and iscsi). This has been well tested and no
  problems have shown up so far"

* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (268 commits)
  scsi: lpfc: update driver version to 12.0.0.4
  scsi: lpfc: Fix port initialization failure.
  scsi: lpfc: Fix 16gb hbas failing cq create.
  scsi: lpfc: Fix crash in blk_mq layer when executing modprobe -r lpfc
  scsi: lpfc: correct oversubscription of nvme io requests for an adapter
  scsi: lpfc: Fix MDS diagnostics failure (Rx < Tx)
  scsi: hisi_sas: Mark PHY as in reset for nexus reset
  scsi: hisi_sas: Fix return value when get_free_slot() failed
  scsi: hisi_sas: Terminate STP reject quickly for v2 hw
  scsi: hisi_sas: Add v2 hw force PHY function for internal ATA command
  scsi: hisi_sas: Include TMF elements in struct hisi_sas_slot
  scsi: hisi_sas: Try wait commands before before controller reset
  scsi: hisi_sas: Init disks after controller reset
  scsi: hisi_sas: Create a scsi_host_template per HW module
  scsi: hisi_sas: Reset disks when discovered
  scsi: hisi_sas: Add LED feature for v3 hw
  scsi: hisi_sas: Change common allocation mode of device id
  scsi: hisi_sas: change slot index allocation mode
  scsi: hisi_sas: Introduce hisi_sas_phy_set_linkrate()
  scsi: hisi_sas: fix a typo in hisi_sas_task_prep()
  ...

DP83620 register set is compatible with the DP83848, but it also supports
100base-FX. When the hardware is configured such as that fiber mode is
enabled, autonegotiation is not possible.

The chip, however, doesn't expose this information via BMSR_ANEGCAPABLE.
Instead, this bit is always set high, even if the particular hardware
configuration makes it so that auto negotiation is not possible [1]. Under
these circumstances, the phy subsystem keeps trying for autonegotiation to
happen, without success.

Hereby, we inspect BMCR_ANENABLE bit after genphy_config_init, which on
reset is set to 0 when auto negotiation is disabled, and so we use this
value instead of BMSR_ANEGCAPABLE.

[1] https://e2e.ti.com/support/interface/ethernet/f/903/p/697165/2571170Signed-off-by: Alvaro Gamez Machado <alvaro.gamez@hazent.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

fchownat() doesn't even hold refcnt of fd until it figures out
fd is really needed (otherwise is ignored) and releases it after
it resolves the path. This means sock_close() could race with
sockfs_setattr(), which leads to a NULL pointer dereference
since typically we set sock->sk to NULL in ->release().

As pointed out by Al, this is unique to sockfs. So we can fix this
in socket layer by acquiring inode_lock in sock_close() and
checking against NULL in sockfs_setattr().

sock_release() is called in many places, only the sock_close()
path matters here. And fortunately, this should not affect normal
sock_close() as it is only called when the last fd refcnt is gone.
It only affects sock_close() with a parallel sockfs_setattr() in
progress, which is not common.

Fixes: 86741ec2 ("net: core: Add a UID field to struct sock.")
Reported-by: shankarapailoor <shankarapailoor@gmail.com>
Cc: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp>
Cc: Lorenzo Colitti <lorenzo@google.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull cifs fixes from Steve French:

 - one smb3 (ACL related) fix for stable

 - one SMB3 security enhancement (when mounting -t smb3 forbid less
   secure dialects)

 - some RDMA and compounding fixes

* tag '4.18-fixes-smb3' of git://git.samba.org/sfrench/cifs-2.6:
  cifs: fix a buffer leak in smb2_query_symlink
  smb3: do not allow insecure cifs mounts when using smb3
  CIFS: Fix NULL ptr deref
  CIFS: fix encryption in SMB3.1.1
  CIFS: Pass page offset for encrypting
  CIFS: Pass page offset for calculating signature
  CIFS: SMBD: Support page offset in memory registration
  CIFS: SMBD: Support page offset in RDMA recv
  CIFS: SMBD: Support page offset in RDMA send
  CIFS: When sending data on socket, pass the correct page offset
  CIFS: Introduce helper function to get page offset and length in smb_rqst
  CIFS: Calculate the correct request length based on page offset and tail size
  cifs: For SMB2 security informaion query, check for minimum sized security descriptor instead of sizeof FileAllInformation class
  CIFS: Fix signing for SMB2/3

Pull block flush handling fix from Jens Axboe:
 "Single fix that we should merge now, fixing a regression in queuing
  flush request, accessing request flags after calling the end_request
  handler"

* tag 'for-linus-20180610' of git://git.kernel.dk/linux-block:
  block: fix use-after-free in block flush handling

Pull restartable sequence support from Thomas Gleixner:
 "The restartable sequences syscall (finally):

  After a lot of back and forth discussion and massive delays caused by
  the speculative distraction of maintainers, the core set of
  restartable sequences has finally reached a consensus.

  It comes with the basic non disputed core implementation along with
  support for arm, powerpc and x86 and a full set of selftests

  It was exposed to linux-next earlier this week, so it does not fully
  comply with the merge window requirements, but there is really no
  point to drag it out for yet another cycle"

* 'core-rseq-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  rseq/selftests: Provide Makefile, scripts, gitignore
  rseq/selftests: Provide parametrized tests
  rseq/selftests: Provide basic percpu ops test
  rseq/selftests: Provide basic test
  rseq/selftests: Provide rseq library
  selftests/lib.mk: Introduce OVERRIDE_TARGETS
  powerpc: Wire up restartable sequences system call
  powerpc: Add syscall detection for restartable sequences
  powerpc: Add support for restartable sequences
  x86: Wire up restartable sequence system call
  x86: Add support for restartable sequences
  arm: Wire up restartable sequences system call
  arm: Add syscall detection for restartable sequences
  arm: Add restartable sequences support
  rseq: Introduce restartable sequences system call
  uapi/headers: Provide types_32_64.h

Pull x86 updates and fixes from Thomas Gleixner:

 - Fix the (late) fallout from the vector management rework causing
   hlist corruption and irq descriptor reference leaks caused by a
   missing sanity check.

   The straight forward fix triggered another long standing issue to
   surface. The pre rework code hid the issue due to being way slower,
   but now the chance that user space sees an EBUSY error return when
   updating irq affinities is way higher, though quite a bunch of
   userspace tools do not handle it properly despite the fact that EBUSY
   could be returned for at least 10 years.

   It turned out that the EBUSY return can be avoided completely by
   utilizing the existing delayed affinity update mechanism for irq
   remapped scenarios as well. That's a bit more error handling in the
   kernel, but avoids fruitless fingerpointing discussions with tool
   developers.

 - Decouple PHYSICAL_MASK from AMD SME as its going to be required for
   the upcoming Intel memory encryption support as well.

 - Handle legacy device ACPI detection properly for newer platforms

 - Fix the wrong argument ordering in the vector allocation tracepoint

 - Simplify the IDT setup code for the APIC=n case

 - Use the proper string helpers in the MTRR code

 - Remove a stale unused VDSO source file

 - Convert the microcode update lock to a raw spinlock as its used in
   atomic context.

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/intel_rdt: Enable CMT and MBM on new Skylake stepping
  x86/apic/vector: Print APIC control bits in debugfs
  genirq/affinity: Defer affinity setting if irq chip is busy
  x86/platform/uv: Use apic_ack_irq()
  x86/ioapic: Use apic_ack_irq()
  irq_remapping: Use apic_ack_irq()
  x86/apic: Provide apic_ack_irq()
  genirq/migration: Avoid out of line call if pending is not set
  genirq/generic_pending: Do not lose pending affinity update
  x86/apic/vector: Prevent hlist corruption and leaks
  x86/vector: Fix the args of vector_alloc tracepoint
  x86/idt: Simplify the idt_setup_apic_and_irq_gates()
  x86/platform/uv: Remove extra parentheses
  x86/mm: Decouple dynamic __PHYSICAL_MASK from AMD SME
  x86: Mark native_set_p4d() as __always_inline
  x86/microcode: Make the late update update_lock a raw lock for RT
  x86/mtrr: Convert to use strncpy_from_user() helper
  x86/mtrr: Convert to use match_string() helper
  x86/vdso: Remove unused file
  x86/i8237: Register device based on FADT legacy boot flag

Pull x86 pti updates from Thomas Gleixner:
 "Three small commits updating the SSB mitigation to take the updated
  AMD mitigation variants into account"

* 'x86-pti-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/bugs: Switch the selection of mitigation from CPU vendor to CPU features
  x86/bugs: Add AMD's SPEC_CTRL MSR usage
  x86/bugs: Add AMD's variant of SSB_NO

Pull more perf tooling updates from Thomas Gleixner:
 "Perf tool updates and fixes:

  perf stat:

   - Display user and system time for workload targets (Jiri Olsa)

  perf record:

   - Enable arbitrary event names thru name= modifier (Alexey Budankov)

  PowerPC:

   - Add a python script for hypervisor call statistics (Ravi Bangoria)

  Intel PT: (Adrian Hunter)

   - Fix sync_switch INTEL_PT_SS_NOT_TRACING

   - Fix decoding to accept CBR between FUP and corresponding TIP

   - Fix MTC timing after overflow

   - Fix "Unexpected indirect branch" error

  perf test:

   - record+probe_libc_inet_pton:
      - To get the symbol table for dynamic shared objects on ubuntu we
        need to pass the -D/--dynamic command line option, unlike with
        the fedora distros (Arnaldo Carvalho de Melo)

   - code-reading:
      - Fix perf_env setup for PTI entry trampolines (Adrian Hunter)

   - kmod-path:
      - Add tests for vdso32 and vdsox32 (Adrian Hunter)

   - Use header file util/debug.h (Thomas Richter)

  perf annotate:

   - Make the various UI backends (stdio, TUI, gtk) use more
     consistently structs with annotation options as specified by the
     user (Arnaldo Carvalho de Melo)

   - Move annotation specific knobs from the symbol_conf global kitchen
     sink to the annotation option structs (Arnaldo Carvalho de Melo)

  perf script:

   - Add more PMU fields to python scripts event handler dict (Jin Yao)

  Core:

   - Fix misleading error for some unparsable events mentioning PMUs
     when those are not involved in the problem (Jiri Olsa)

   - Consider BSS symbols when processing /proc/kallsyms ('B' and 'b')
     (Arnaldo Carvalho de Melo)

   - Be more robust when trying to use per-symbol histograms, checking
     for unlikely but possible cases where the space for the histograms
     wasn't allocated, print a debug message for such cases (Arnaldo
     Carvalho de Melo)

   - Fix symbol and object code resolution for vdso32 and vdsox32
     (Adrian Hunter)

   - No need to check for null when passing pointers to foo__get() style
     refcount grabbing helpers, just like in the kernel and with free(),
     its safe to pass a NULL pointer to avoid having to check it before
     each and every foo__get() call (Arnaldo Carvalho de Melo)

   - Remove some dead code (quote.[ch]) (Arnaldo Carvalho de Melo)

   - Remove some needless globals, making them local (Arnaldo Carvalho
     de Melo)

   - Reduce usage of symbol_conf.use_callchain, using other means of
     finding out if callchains are in use or available for specific
     events, as we evolved this codebase to allow requesting callchains
     for just a subset of the monitored events. In time it will help
     polish recording and showing mixed sets accross the various tools:

        perf record -e cycles/call-graph=fp/,cache-misses/call-graph=dwarf/,instructions'

     (Arnaldo Carvalho de Melo)

   - Consider PTI entry trampolines in map__rip_2objdump() (Adrian
     Hunter)"

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (50 commits)
  perf script python: Add dict fields introduction to Documentation
  perf script python: Add more PMU fields to event handler dict
  perf script python: Move dsoname code to a new function
  perf symbols: Add BSS symbols when reading from /proc/kallsyms
  perf annnotate: Make __symbol__inc_addr_samples handle src->histograms == NULL
  perf intel-pt: Fix "Unexpected indirect branch" error
  perf intel-pt: Fix MTC timing after overflow
  perf intel-pt: Fix decoding to accept CBR between FUP and corresponding TIP
  perf intel-pt: Fix sync_switch INTEL_PT_SS_NOT_TRACING
  perf script powerpc: Python script for hypervisor call statistics
  perf test record+probe_libc_inet_pton: Ask 'nm' for dynamic symbols
  perf map: Consider PTI entry trampolines in rip_2objdump()
  perf test code-reading: Fix perf_env setup for PTI entry trampolines
  perf tools: Fix pmu events parsing rule
  perf stat: Display user and system time
  perf record: Enable arbitrary event names thru name= modifier
  perf tools: Fix symbol and object code resolution for vdso32 and vdsox32
  perf tests kmod-path: Add tests for vdso32 and vdsox32
  perf hists: Check if a hist_entry has callchains before using them
  perf hists: Introduce hist_entry__has_callchain() method
  ...

Pull irq fixes from Thomas Gleixner:
 "Two small fixlets:

   - Add the missing iomu mapping call in the Freescale/NXP/Qualcomm/
     whoever owns it now/ SCFG MSI irqchip driver. Otherwise IRQs wont
     work at all.

   - Fix a SMP=n build warning in the STM32 irq chip driver"

* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  irqchip/ls-scfg-msi: Map MSIs in the iommu
  irqchip/stm32: Fix non-SMP build warning

Pull core fixes from Thomas Gleixner:
 "A small set of core updates:

   - Make objtool cope with GCC8 oddities some more

   - Remove a stale local_irq_save/restore sequence in the signal code
     along with the stale comment in the RCU code. The underlying issue
     which led to this has been solved long time ago, but nobody cared
     to cleanup the hackarounds"

* 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  signal: Remove no longer required irqsave/restore
  rcu: Update documentation of rcu_read_unlock()
  objtool: Fix GCC 8 cold subfunction detection for aliased functions

Commit a841796f ("signal: align __lock_task_sighand() irq disabling and
RCU") introduced a rcu read side critical section with interrupts
disabled. The changelog suggested that a better long-term fix would be "to
make rt_mutex_unlock() disable irqs when acquiring the rt_mutex structure's
->wait_lock".

This long-term fix has been made in commit b4abf910 ("rtmutex: Make
wait_lock irq safe") for a different reason.

Therefore revert commit a841796f ("signal: align >
__lock_task_sighand() irq disabling and RCU") as the interrupt disable
dance is not longer required.

The change was tested on the base of b4abf910 ("rtmutex: Make wait_lock
irq safe") with a four hour run of rcutorture scenario TREE03 with lockdep
enabled as suggested by Paul McKenney.
Signed-off-by: Anna-Maria Gleixner <anna-maria@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Acked-by: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: bigeasy@linutronix.de
Link: https://lkml.kernel.org/r/20180525090507.22248-3-anna-maria@linutronix.de

Since commit b4abf910 ("rtmutex: Make wait_lock irq safe") the
explanation in rcu_read_unlock() documentation about irq unsafe rtmutex
wait_lock is no longer valid.

Remove it to prevent kernel developers reading the documentation to rely on
it.
Suggested-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Anna-Maria Gleixner <anna-maria@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Acked-by: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: bigeasy@linutronix.de
Link: https://lkml.kernel.org/r/20180525090507.22248-2-anna-maria@linutronix.de

Merge proc_cmdline simplifications.

This re-writes the get_mm_cmdline() logic to be rather simpler than it
used to be, and makes the semantics for "cmdline goes past the end of
the original area" more natural.

You _can_ use prctl(PR_SET_MM) to just point your command line somewhere
else entirely, but the traditional model is to just edit things in place
and that still needs to continue to work.  At least this way the code
makes some sense.

* proc-cmdline:
  fs/proc: simplify and clarify get_mm_cmdline() function
  fs/proc: re-factor proc_pid_cmdline_read() a bit

Use the error code EUCLEAN for filesystem errors because other
filesystems use this code too.

[ And remove unused EMEMERROR  - Linus ]
Signed-off-by: Mikulas Patocka <mikulas@artax.karlin.mff.cuni.cz>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>