- 11 Aug, 2023 40 commits
-
-
Luiz Augusto von Dentz authored
This introduces PTR_UINT/UINT_PTR macros and replace the use of PTR_ERR/ERR_PTR. Signed-off-by:Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
-
Luiz Augusto von Dentz authored
When running with concurrent task only one CIS was being assigned so this attempts to rework the way the PDU is constructed so it is handled later at the callback instead of in place. Fixes: 26afbd82 ("Bluetooth: Add initial implementation of CIS connections") Signed-off-by:
-
Luiz Augusto von Dentz authored
This moves hci_is_le_conn_scanning to hci_core.h so it can be used by different files without having to duplicate its code. Signed-off-by: -
Luiz Augusto von Dentz authored
Only the number of CIS shall be limited to 0x1f, the CIS ID in the other hand is up to 0xef. Fixes: 26afbd82 ("Bluetooth: Add initial implementation of CIS connections") Signed-off-by:
-
Luiz Augusto von Dentz authored
This introduces hci_conn_set_handle which takes care of verifying the conditions where the hci_conn handle can be modified, including when hci_conn_abort has been called and also checks that the handles is valid as well. Signed-off-by: -
Luiz Augusto von Dentz authored
Valid range of CIG/CIS are 0x00 to 0xEF, so this checks they are properly checked before attempting to use HCI_OP_LE_SET_CIG_PARAMS. Fixes: ccf74f23 ("Bluetooth: Add BTPROTO_ISO socket type") Signed-off-by:
-
Luiz Augusto von Dentz authored
Connections may be cleanup while waiting for the commands to complete so this attempts to check if the connection handle remains valid in case of errors that would lead to call hci_conn_failed: BUG: KASAN: slab-use-after-free in hci_conn_failed+0x1f/0x160 Read of size 8 at addr ffff888001376958 by task kworker/u3:0/52 CPU: 0 PID: 52 Comm: kworker/u3:0 Not tainted 6.5.0-rc1-00527-g2dfe76d58d3a #5615 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.2-1.fc38 04/01/2014 Workqueue: hci0 hci_cmd_sync_work Call Trace: <TASK> dump_stack_lvl+0x1d/0x70 print_report+0xce/0x620 ? __virt_addr_valid+0xd4/0x150 ? hci_conn_failed+0x1f/0x160 kasan_report+0xd1/0x100 ? hci_conn_failed+0x1f/0x160 hci_conn_failed+0x1f/0x160 hci_abort_conn_sync+0x237/0x360 Signed-off-by: -
Luiz Augusto von Dentz authored
When sending HCI_OP_CREATE_CONN_CANCEL it shall Wait for HCI_EV_CONN_COMPLETE, not HCI_EV_CMD_STATUS, when the reason is anything but HCI_ERROR_REMOTE_POWER_OFF. This reason is used when suspending or powering off, where we don't want to wait for the peer's response. Signed-off-by: -
Pauli Virtanen authored
Dropped CIS that are in state BT_OPEN/BT_BOUND, and in state BT_CONNECT with HCI_CONN_CREATE_CIS unset, should be cleaned up immediately. Closing CIS ISO sockets should result to the hci_conn be deleted, so that potentially pending CIG removal can run. hci_abort_conn cannot refer to them by handle, since their handle is still unset if Set CIG Parameters has not yet completed. This fixes CIS not being terminated if the socket is shut down immediately after connection, so that the hci_abort_conn runs before Set CIG Parameters completes. See new BlueZ test "ISO Connect Close - Success" Signed-off-by:
Pauli Virtanen <pav@iki.fi> Signed-off-by:
-
Pauli Virtanen authored
Calling hci_conn_del in __iso_sock_close is invalid. It needs hdev->lock, but it cannot be acquired there due to lock ordering. Fix this by doing cleanup via hci_conn_drop. Return hci_conn with refcount 1 from hci_bind_cis and hci_connect_cis, so that the iso_conn always holds one reference. This also fixes refcounting when error handling. Since hci_conn_abort shall handle termination of connections in any state properly, we can handle BT_CONNECT socket state in the same way as BT_CONNECTED. Signed-off-by:
-
Yue Haibing authored
This is introduced in commit 903e4541 but was never implemented. Fixes: 903e4541 ("Bluetooth: AMP: Use HCI cmd to Read Loc AMP Assoc") Signed-off-by:
Yue Haibing <yuehaibing@huawei.com> Signed-off-by:
-
Luiz Augusto von Dentz authored
btusb_recv_event_intel is specific to Intel controllers therefore it shall be placed inside btintel.c so btusb don't have a mix of vendor specific code with the generic parts. Signed-off-by: -
Luca Weiss authored
Add support for the Bluetooth chip codenamed APACHE which is part of WCN3988. The firmware for this chip has a slightly different naming scheme compared to most others. For ROM Version 0x0200 we need to use apbtfw10.tlv + apnv10.bin and for ROM version 0x201 apbtfw11.tlv + apnv11.bin Signed-off-by:
Luca Weiss <luca.weiss@fairphone.com> Signed-off-by:
-
Luca Weiss authored
Add the compatible for the Bluetooth part of the Qualcomm WCN3988 chipset. Acked-by:
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by:
-
Neeraj Sanjay Kale authored
This adds support for NXP AW693 chipset in btnxpuart driver by adding FW name and bootloader signature. Based on the loader version bits 7:6 of the bootloader signature, the driver can choose between selecting secure and non-secure FW files. Signed-off-by:
Neeraj Sanjay Kale <neeraj.sanjaykale@nxp.com> Signed-off-by:
-
Yuanjun Gong authored
in nokia_bluetooth_serdev_probe(), check the return value of clk_prepare_enable() and return the error code if clk_prepare_enable() returns an unexpected value. Fixes: 7bb31868 ("Bluetooth: add nokia driver") Signed-off-by:
Yuanjun Gong <ruc_gongyuanjun@163.com> Signed-off-by:
-
Rob Herring authored
The DT of_device.h and of_platform.h date back to the separate of_platform_bus_type before it as merged into the regular platform bus. As part of that merge prepping Arm DT support 13 years ago, they "temporarily" include each other. They also include platform_device.h and of.h. As a result, there's a pretty much random mix of those include files used throughout the tree. In order to detangle these headers and replace the implicit includes with struct declarations, users need to explicitly include the correct includes. Signed-off-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Mans Rullgard authored
The BCM43430A1 has a default MAC address of AA:AA:AA:AA:AA:AA. Although, unlike some other entries, this does not include the chip name, it is clearly not a real address. This was found in AzureWave AW-NB197SM and AW-NM372SM modules. Signed-off-by:
Mans Rullgard <mans@mansr.com> Signed-off-by:
-
Luiz Augusto von Dentz authored
This adds support for BT_PKT_STATUS socketopt by setting BT_SK_PKT_STATUS. Then upon receiving an ISO packet the code would attempt to store the Packet_Status_Flag to hci_skb_pkt_status which is then forward to userspace in the form of BT_SCM_PKT_STATUS whenever BT_PKT_STATUS has been enabled/set. Signed-off-by: -
Luiz Augusto von Dentz authored
This makes the handling of BT_PKT_STATUS more generic so it can be reused by sockets other than SCO like BT_DEFER_SETUP, etc. Signed-off-by: -
Chris Lu authored
There may be a potential kernel crash risk if 'skb->len - MTK_COREDUMP_END_LEN' value is less than 0 when doing memcmp in btmtk_process_coredump(). Check the value is valid before doing memcmp. [215.021695] Unable to handle kernel paging request at virtual address ffffff939fffd3c5 [215.021781] Mem abort info: [215.021805] ESR = 0x96000005 [215.021833] EC = 0x25: DABT (current EL), IL = 32 bits [215.021861] SET = 0, FnV = 0 [215.021875] EA = 0, S1PTW = 0 [215.021886] Data abort info: [215.021899] ISV = 0, ISS = 0x00000005 [215.021912] CM = 0, WnR = 0 [215.021929] swapper pgtable: 4k pages, 39-bit VAs, pgdp=00000000410de000 [215.021943] [ffffff939fffd3c5] pgd=0000000000000000, p4d=0000000000000000, pud=0000000000000000 [215.021979] Internal error: Oops: 96000005 [#1] PREEMPT SMP [215.022496] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.10.186#3 (HASH:ad23 4) [215.022511] Hardware name: MediaTek Tomato board (DT) [215.022530] pstate: 80400009 (Nzcv daif +PAN -UAO -TCO BTYPE=--) [215.022556] pc : __pi_memcmp+0xd0/0x1b8 [215.022579] lr : btmtk_process_coredump+0xb0/0x5f8 [btmtk] [215.022593] sp : ffffffc010003d40 [215.022607] x29: ffffffc010003d40 x28: 0000000000000006 [215.022633] x27: ffffffda696350c0 x26: 0000000000000002 [215.022659] x25: 00000000000003ff x24: ffffff9360cca804 [215.022685] x23: 0000000000000000 x22: ffffff9365638500 [215.022710] x21: ffffff9365638700 x20: 0000000000000000 [215.022736] x19: ffffff936002e000 x18: 0000000000000000 [215.022761] x17: 0000000000000180 x16: ffffffda6881b8b4 [215.022787] x15: 0000000000000001 x14: 0000000000002d00 [215.022812] x13: 0000000000060000 x12: 0000000000000181 [215.022837] x11: 0000000000000006 x10: fffffffffffffffd [215.022862] x9 : 0000000000000006 x8 : 0000000000000003 [215.022887] x7 : 0000000000000000 x6 : 0000000000000000 [215.022913] x5 : ffffff93656387b8 x4 : 0000000000000000 [215.022938] x3 : ffffffc010003c18 x2 : 0000000000000006 [215.022963] x1 : ffffffda09d4124a x0 : ffffff939fffd3c5 [215.022989] Call trace: [215.023012] __pi_memcmp+0xd0/0x1b8 [215.023053] btusb_recv_acl_mtk+0x64/0x90 [btusb (HASH:dc6b 5)] [215.023087] btusb_recv_bulk+0x118/0x170 [btusb (HASH:dc6b 5)] [215.023121] btusb_bulk_complete+0x8c/0x148 [btusb (HASH:dc6b 5)] [215.023144] __usb_hcd_giveback_urb+0xbc/0x148 [215.023164] usb_giveback_urb_bh+0xb4/0x190 [215.023184] tasklet_action_common+0x98/0x1a0 [215.023201] tasklet_action+0x2c/0x38 [215.023220] __do_softirq+0xe0/0x38c [215.023241] invoke_softirq+0x34/0x6c [215.023258] irq_exit+0x6c/0xb0 [215.023279] __handle_domain_irq+0x98/0xd4 [215.023296] gic_handle_irq+0x5c/0x11c [215.023313] el1_irq+0xd0/0x180 [215.023332] cpuidle_enter_state+0xac/0x338 [215.023349] cpuidle_enter+0x40/0x70 [215.023366] do_idle+0x150/0x278 [215.023384] cpu_startup_entry+0x2c/0x58 [215.023401] rest_init+0xdc/0xec [215.023419] arch_call_rest_init+0x18/0x24 [215.023435] start_kernel+0x334/0x400 [215.023460] Code: 91002129 eb09010a 9a89810b cb0b0042 (38401403) [215.023478] ---[ end trace 28668fd20c7a90cd ] Fixes: 2822cd0173ad ("Bluetooth: btusb: mediatek: add MediaTek devcoredump support") Signed-off-by:Chris Lu <chris.lu@mediatek.com> Co-developed-by:
Sean Wang <sean.wang@mediatek.com> Signed-off-by:
-
Roger Gammans authored
This one is found on the Dell Inspiron 2-in-1 7435 The information in /sys/kernel/debug/usb/devices about the Bluetooth device is listed as the below. T: Bus=03 Lev=01 Prnt=01 Port=02 Cnt=01 Dev#= 2 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0489 ProdID=e0f1 Rev= 1.00 S: Manufacturer=MediaTek Inc. S: Product=Wireless_Device S: SerialNumber=000000000 C:* #Ifs= 3 Cfg#= 1 Atr=e0 MxPwr=100mA A: FirstIf#= 0 IfCount= 3 Cls=e0(wlcon) Sub=01 Prot=01 I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=125us E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms I: If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 63 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 63 Ivl=1ms I:* If#= 2 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none) E: Ad=8a(I) Atr=03(Int.) MxPS= 64 Ivl=125us E: Ad=0a(O) Atr=03(Int.) MxPS= 64 Ivl=125us I: If#= 2 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none) E: Ad=8a(I) Atr=03(Int.) MxPS= 512 Ivl=125us E: Ad=0a(O) Atr=03(Int.) MxPS= 512 Ivl=125us Signed-off-by:
Roger Gammans <rgammans@gammascience.co.uk> Signed-off-by:
-
Ying Hsu authored
If hci_unregister_dev() frees the hci_dev object but hci_suspend_notifier may still be accessing it, it can cause the program to crash. Here's the call trace: <4>[102152.653246] Call Trace: <4>[102152.653254] hci_suspend_sync+0x109/0x301 [bluetooth] <4>[102152.653259] hci_suspend_dev+0x78/0xcd [bluetooth] <4>[102152.653263] hci_suspend_notifier+0x42/0x7a [bluetooth] <4>[102152.653268] notifier_call_chain+0x43/0x6b <4>[102152.653271] __blocking_notifier_call_chain+0x48/0x69 <4>[102152.653273] __pm_notifier_call_chain+0x22/0x39 <4>[102152.653276] pm_suspend+0x287/0x57c <4>[102152.653278] state_store+0xae/0xe5 <4>[102152.653281] kernfs_fop_write+0x109/0x173 <4>[102152.653284] __vfs_write+0x16f/0x1a2 <4>[102152.653287] ? selinux_file_permission+0xca/0x16f <4>[102152.653289] ? security_file_permission+0x36/0x109 <4>[102152.653291] vfs_write+0x114/0x21d <4>[102152.653293] __x64_sys_write+0x7b/0xdb <4>[102152.653296] do_syscall_64+0x59/0x194 <4>[102152.653299] entry_SYSCALL_64_after_hwframe+0x5c/0xc1 This patch holds the reference count of the hci_dev object while processing it in hci_suspend_notifier to avoid potential crash caused by the race condition. Signed-off-by:
Ying Hsu <yinghsu@chromium.org> Signed-off-by:
-
Lee, Chun-Yi authored
This patch adds code to check HCI_UART_PROTO_READY flag before accessing hci_uart->proto. It fixes the race condition in hci_uart_tty_ioctl() between HCIUARTSETPROTO and HCIUARTGETPROTO. This issue bug found by Yu Hao and Weiteng Chen: BUG: general protection fault in hci_uart_tty_ioctl [1] The information of C reproducer can also reference the link [2] Reported-by:
Yu Hao <yhao016@ucr.edu> Closes: https://lore.kernel.org/all/CA+UBctC3p49aTgzbVgkSZ2+TQcqq4fPDO7yZitFT5uBPDeCO2g@mail.gmail.com/ [1] Reported-by:
Weiteng Chen <wchen130@ucr.edu> Closes: https://lore.kernel.org/lkml/CA+UBctDPEvHdkHMwD340=n02rh+jNRJNNQ5LBZNA+Wm4Keh2ow@mail.gmail.com/T/ [2] Signed-off-by:
"Lee, Chun-Yi" <jlee@suse.com> Signed-off-by:
-
Christophe JAILLET authored
strtobool() is the same as kstrtobool(). However, the latter is more used within the kernel. In order to remove strtobool() and slightly simplify kstrtox.h, switch to the other function name. While at it, include the corresponding header file (<linux/kstrtox.h>) Signed-off-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by:
-
Chris Lu authored
Add VID 04ca & PID 3804 for MediaTek MT7922 USB Bluetooth chip. The information in /sys/kernel/debug/usb/devices about the Bluetooth device is listed as the below. T: Bus=05 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=04ca ProdID=3804 Rev= 1.00 S: Manufacturer=MediaTek Inc. S: Product=Wireless_Device S: SerialNumber=000000000 C:* #Ifs= 3 Cfg#= 1 Atr=e0 MxPwr=100mA A: FirstIf#= 0 IfCount= 3 Cls=e0(wlcon) Sub=01 Prot=01 I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=125us E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms I: If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 63 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 63 Ivl=1ms I:* If#= 2 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none) E: Ad=8a(I) Atr=03(Int.) MxPS= 64 Ivl=125us E: Ad=0a(O) Atr=03(Int.) MxPS= 64 Ivl=125us I: If#= 2 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none) E: Ad=8a(I) Atr=03(Int.) MxPS= 512 Ivl=125us E: Ad=0a(O) Atr=03(Int.) MxPS= 512 Ivl=125us Signed-off-by:
-
Chris Lu authored
Add VID 0489 & PID e102 for MediaTek MT7922 USB Bluetooth chip. The information in /sys/kernel/debug/usb/devices about the Bluetooth device is listed as the below. T: Bus=05 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0489 ProdID=e102 Rev= 1.00 S: Manufacturer=MediaTek Inc. S: Product=Wireless_Device S: SerialNumber=000000000 C:* #Ifs= 3 Cfg#= 1 Atr=e0 MxPwr=100mA A: FirstIf#= 0 IfCount= 3 Cls=e0(wlcon) Sub=01 Prot=01 I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=125us E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms I: If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 63 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 63 Ivl=1ms I:* If#= 2 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none) E: Ad=8a(I) Atr=03(Int.) MxPS= 64 Ivl=125us E: Ad=0a(O) Atr=03(Int.) MxPS= 64 Ivl=125us I: If#= 2 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none) E: Ad=8a(I) Atr=03(Int.) MxPS= 512 Ivl=125us E: Ad=0a(O) Atr=03(Int.) MxPS= 512 Ivl=125us Signed-off-by:
-
Luiz Augusto von Dentz authored
HCI_MAX_AD_LENGTH shall only be used if the controller doesn't support extended advertising, otherwise HCI_MAX_EXT_AD_LENGTH shall be used instead. Signed-off-by: -
Douglas Anderson authored
The hci_add_adv_monitor() hci_remove_adv_monitor() functions call bt_dev_dbg() to print some debug statements. The bt_dev_dbg() macro automatically adds in the device's name. That means that we shouldn't include the name in the bt_dev_dbg() calls. Suggested-by:
Luiz Augusto von Dentz <luiz.dentz@gmail.com> Signed-off-by:
Douglas Anderson <dianders@chromium.org> Signed-off-by:
-
Kiran K authored
Devices from /sys/kernel/debug/usb/devices: T: Bus=09 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=12 MxCh= 0 D: Ver= 2.01 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=8087 ProdID=0036 Rev= 0.00 C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 64 Ivl=1ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms I: If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 63 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 63 Ivl=1ms Signed-off-by:
Kiran K <kiran.k@intel.com> Signed-off-by:
-
Chris Lu authored
Add VID/PID 0489/e0f6 for MediaTek MT7922 USB Bluetooth chip. The information in /sys/kernel/debug/usb/devices about the Bluetooth device is listed as the below. T: Bus=01 Lev=01 Prnt=01 Port=04 Cnt=03 Dev#= 4 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0489 ProdID=e0f6 Rev= 1.00 S: Manufacturer=MediaTek Inc. S: Product=Wireless_Device S: SerialNumber=000000000 C:* #Ifs= 3 Cfg#= 1 Atr=e0 MxPwr=100mA A: FirstIf#= 0 IfCount= 3 Cls=e0(wlcon) Sub=01 Prot=01 I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=125us E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms I: If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 63 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 63 Ivl=1ms I:* If#= 2 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none) E: Ad=8a(I) Atr=03(Int.) MxPS= 64 Ivl=125us E: Ad=0a(O) Atr=03(Int.) MxPS= 64 Ivl=125us I: If#= 2 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none) E: Ad=8a(I) Atr=03(Int.) MxPS= 512 Ivl=125us E: Ad=0a(O) Atr=03(Int.) MxPS= 512 Ivl=125us Signed-off-by:
-
Dan Carpenter authored
Return negative -EIO instead of positive EIO. Fixes: 926df8962f3f ("Bluetooth: msft: Extended monitor tracking by address filter") Signed-off-by:Dan Carpenter <dan.carpenter@linaro.org> Reviewed-by:
Simon Horman <simon.horman@corigine.com> Signed-off-by:
-
Iulia Tanasescu authored
Some use cases require the user to be informed if BIG synchronization fails. This commit makes it so that even if the BIG sync established event arrives with error status, a new hconn is added for each BIS, and the iso layer is notified about the failed connections. Unsuccesful bis connections will be marked using the HCI_CONN_BIG_SYNC_FAILED flag. From the iso layer, the POLLERR event is triggered on the newly allocated bis sockets, before adding them to the accept list of the parent socket. From user space, a new fd for each failed bis connection will be obtained by calling accept. The user should check for the POLLERR event on the new socket, to determine if the connection was successful or not. The HCI_CONN_BIG_SYNC flag has been added to mark whether the BIG sync has been successfully established. This flag is checked at bis cleanup, so the HCI LE BIG Terminate Sync command is only issued if needed. The BT_SK_BIG_SYNC flag indicates if BIG create sync has been called for a listening socket, to avoid issuing the command everytime a BIGInfo advertising report is received. Signed-off-by:
Iulia Tanasescu <iulia.tanasescu@nxp.com> Signed-off-by:
-
Valentin David authored
Asus ROG Ally gaming computer has a MediaTek MT7922 chip that uses USB id 0489:e0f5 and needs to be added to the table. Without this, the device is not usable and gives the following error: Bluetooth: hci0: Opcode 0x c03 failed: -110 Output from /sys/kernel/debug/usb/devices: T: Bus=01 Lev=01 Prnt=01 Port=03 Cnt=03 Dev#= 4 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0489 ProdID=e0f5 Rev= 1.00 S: Manufacturer=MediaTek Inc. S: Product=Wireless_Device S: SerialNumber=000000000 C:* #Ifs= 3 Cfg#= 1 Atr=e0 MxPwr=100mA A: FirstIf#= 0 IfCount= 3 Cls=e0(wlcon) Sub=01 Prot=01 I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=125us E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms I: If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 63 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 63 Ivl=1ms I:* If#= 2 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none) E: Ad=8a(I) Atr=03(Int.) MxPS= 64 Ivl=125us E: Ad=0a(O) Atr=03(Int.) MxPS= 64 Ivl=125us I: If#= 2 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none) E: Ad=8a(I) Atr=03(Int.) MxPS= 512 Ivl=125us E: Ad=0a(O) Atr=03(Int.) MxPS= 512 Ivl=125us Signed-off-by:
Valentin David <valentin.david@gmail.com> Signed-off-by:
-
Luiz Augusto von Dentz authored
This attempts to always allocate a unique handle for connections so they can be properly aborted by the likes of hci_abort_conn, so this uses the invalid range as a pool of unset handles that way if userspace is trying to create multiple connections at once each will be given a unique handle which will be considered unset. Signed-off-by: -
Luiz Augusto von Dentz authored
ISO_LINK connections where not being handled properly on hci_abort_conn_sync which sometimes resulted in sending the wrong commands, or in case of having the reject command being sent by the socket code (iso.c) which is sort of a layer violation. Signed-off-by: -
Luiz Augusto von Dentz authored
This consolidates code for aborting connections using hci_cmd_sync_queue so it is synchronized with other threads, but because of the fact that some commands may block the cmd_sync_queue while waiting specific events this attempt to cancel those requests by using hci_cmd_sync_cancel. Signed-off-by: -
Jing Cai authored
This patch implement function .coredump() and dmp_hdr() in btusb driver for MediaTek controller. FW core dump was triggered by FW specific event to show something unexpected happened in the controller. The driver would be responsible for collecting and uploading the device core dump pieces in hci driver using core dump API. Once we finished the whole process, the driver would reset the controller to recover the kind of fatal error. Co-developed-by:
Jing Cai <jing.cai@mediatek.com> Signed-off-by:
-
Jing Cai authored
Introduce btmtk_reset_work which can be called whenever the firmware abort, HCI command timeout, other fatal error happen. Co-developed-by:
-
Sean Wang authored
Use readx_poll_timeout instead of open coding to poll the hardware reset status until it is done. Signed-off-by:
-
