The current code uses in some instances enum transcoder for PCH
transcoders and enum pipe in others. This is error prone and clang
raises warnings like this:

drivers/gpu/drm/i915/intel_dp.c:3546:51: warning: implicit conversion
  from enumeration type 'enum pipe' to different enumeration type
  'enum transcoder' [-Wenum-conversion]
    intel_set_pch_fifo_underrun_reporting(dev_priv, PIPE_A, false);

Consistently use the type enum pipe for PCH transcoders.
Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20170717181403.57324-1-mka@chromium.org

Fix the sizeof(ptr) vs. sizeof(*ptr) typo.

Fixes: 2889caa9 ("drm/i915: Eliminate lots of iterations over the execobjects array")
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/20170714151242.517-2-imre.deak@intel.com

1acfc104 missed to convert this one caller to be lockless. The side
effect of that was that the error check in lookup_context() became
incorrect. Convert now this caller too.

Fixes: 1acfc104 ("drm/i915: Enable rcu-only context lookups")
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170714151242.517-1-imre.deak@intel.com

Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

We could probably hit this already with our current async fbdev init,
but it's much easier to hit this with the new deferred fbdev setup
that I'm working on polishing.

Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reported-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170706130023.28417-2-daniel.vetter@ffwll.ch

With deferred fbdev setup we always need to forward hotplug events,
even if fbdev isn't fully set up yet. Otherwise the deferred setup
will neer happen.

Originally this check was added in

commit c45eb4fe (tag: drm-intel-next-fixes-2016-08-05)
Author: Chris Wilson <chris@chris-wilson.co.uk>
Date:   Wed Jul 13 18:34:45 2016 +0100

    drm/i915/fbdev: Check for the framebuffer before use

But the specific case of the hotplug function blowing up was fixed in

commit 50c3dc97
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date:   Fri Jun 27 17:19:22 2014 +0200

    drm/fb-helper: Fix hpd vs. initial config races

Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170706130023.28417-1-daniel.vetter@ffwll.ch

use same cpp value in different phase of plane WM caluclation.
Signed-off-by: Mahesh Kumar <mahesh1.kumar@intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170705143154.32132-7-mahesh1.kumar@intel.com

height of plane was require to swap width/height in case of 90/270
rotation. Now src structure contains already swapped values, So we
don't have to calculate height of the plane.
Signed-off-by: Mahesh Kumar <mahesh1.kumar@intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170705143154.32132-6-mahesh1.kumar@intel.com

This patch introduce addition wrapper for fixed point 16.16 operations.
Which will be used by later patches to avoid direct member variables
access of fixed_16_16_t structure.

add_fixed16 : takes 2 fixed_16_16_t variable & returns fixed_16_16_t
add_fixed16_u32 : takes fixed_16_16_t & u32 variable & returns fixed_16_16_t
Signed-off-by: Mahesh Kumar <mahesh1.kumar@intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170705143154.32132-5-mahesh1.kumar@intel.com

This patch make naming of fixed-point wrappers consistent
operation_<any_post_operation>_<1st operand>_<2nd operand>
also shorten the name for fixed_16_16 to fixed16

s/u32_to_fixed_16_16/u32_to_fixed16
s/fixed_16_16_to_u32/fixed16_to_u32
s/fixed_16_16_to_u32_round_up/fixed16_to_u32_round_up
s/min_fixed_16_16/min_fixed16
s/max_fixed_16_16/max_fixed16
s/mul_u32_fixed_16_16/mul_u32_fixed16
s/fixed_16_16_div/div_fixed16

Changes Since V1:
 - Split the patch in more logical patches (Maarten)
Changes Since V2:
 - Rebase
Signed-off-by: Mahesh Kumar <mahesh1.kumar@intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170705143154.32132-4-mahesh1.kumar@intel.com

This patch combines fixed_16_16_div & fixed_16_16_div_u64 wrappers.
And new fixed_16_16_div wrapper always performs division operation in
u64 internally, to avoid any data loss which was happening in earlier
version of wrapper.
earlier wrapper was converting u32 to fixed16 in 32 bit so we were
losing 16-MSB data.
Signed-off-by: Mahesh Kumar <mahesh1.kumar@intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170705143154.32132-3-mahesh1.kumar@intel.com
[mlankhorst: Fix typo in commit message.]

This patch creates a new function for clamping u64 to fixed16.
And make use of this function in other fixed16 wrappers.
Signed-off-by: Mahesh Kumar <mahesh1.kumar@intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170705143154.32132-2-mahesh1.kumar@intel.com

Paulo had noticed that inside cnl_ddi_vswing_program
the case was handling voltage but with no indication
of type where a missing type could also take us to that
path. So my first attempt was to add a message to
let clear who trigger that path.

However DK had a better idea that is to handle the
missed type sooner before it might take to that path.
So this v2 here uses his approach.

v2: Handle missed type sooner.

Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170710205852.28352-1-rodrigo.vivi@intel.com

Resync with the main drm-next pull request for 4.13. What we really
need is to fully resync with pending drm-misc, but that's not yet
possible due to the still ongoing merge window.
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>

This is a follow-up after enabling DC states with
commit: "drm/i915/DMC/CNL: Load DMC on CNL".

Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1499373908-26761-1-git-send-email-rodrigo.vivi@intel.com

Commit 9a148a96 ("drm/i915/debugfs: add dp mst info") adds support
for DP-MST to intel_connector_info, but forgot to remove the early
return for DP-MST.

Remove it, and print out MST connectors directly.

Fixes: 9a148a96 ("drm/i915/debugfs: add dp mst info")
Cc: <stable@vger.kernel.org> # v4.11+
Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Cc: Libin Yang <libin.yang@intel.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170626083349.24389-1-maarten.lankhorst@linux.intel.comReviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>

PLLs are the source clocks for the DDIs so in order
to determine the ddi clock we need to check the PLL
configuration.

v2: Mika pointed out that 24 was hardcoded while it
    should consider ref clock that can be either 24KHz
    or 19.2KHz on CNL.
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1499374321-31152-1-git-send-email-rodrigo.vivi@intel.com

Apparently no change on RPS stuff from previous platforms.

v2: Merging to rps related patches in one and also adding
    missed cases.

Cc: David Weinehall <david.weinehall@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: David Weinehall <david.weinehall@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1499373673-25066-1-git-send-email-rodrigo.vivi@intel.com

No change on render context size is required for Gen10.

So this patch doesn't change the default behaviour,
but only avoid the missing_case message.

Cc: Ben Widawsky <benjamin.widawsky@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Ben Widawsky <ben@bwidawsk.net>
Link: http://patchwork.freedesktop.org/patch/msgid/1499375184-5725-1-git-send-email-rodrigo.vivi@intel.com

Cannon Lake's VBT that is currently available for B0 stepping
states that port D uses alternate pin 3 messing up with the
default pin-port mapping table. Using that information we cannot
get HDMI working properly. So for now we don't relly on VBT for
this information.

Cc: Clint Taylor <clinton.a.taylor@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Clinton Taylor <clinton.a.taylor@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1499375295-6454-1-git-send-email-rodrigo.vivi@intel.com

The ppgtt should be get directly from i915_address_space *vm instead of
vma->vm.

v2:
- add one more fix for bxt. (Chris)

Fixes: 4a234c5f ("drm/i915: pass the vma to insert_entries")
Bugzilla:https://bugs.freedesktop.org/show_bug.cgi?id=101713Signed-off-by: Chuanxiao Dong <chuanxiao.dong@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com> v1
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Zhenyu Wang <zhenyuw@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1499421059-18262-1-git-send-email-chuanxiao.dong@intel.comReviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>

Cannonlake has same color setup as Geminilake.
Legacy color load luts doesn't work anymore on Cannonlake+.

Cc: Clint Taylor <clinton.a.taylor@intel.com>
Cc: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Clinton Taylor <clinton.a.taylor@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1499374873-2454-1-git-send-email-rodrigo.vivi@intel.com

By spec there is no change on force wake registers
for Cannonlake. Let's reuse gen9 one.

v2: Adding missing case for the write part. (Tvrtko)
v3: Rebase on recent tree.
v4: Make it for gen9+ instead adding gen10 only. (by Joonas).

Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1499302831-17773-1-git-send-email-rodrigo.vivi@intel.com

So don't forget to reserve its stolen memory bits.

v2: Add ack and remove "TODO" from commit message.
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Link: http://patchwork.freedesktop.org/patch/msgid/1499302845-17856-1-git-send-email-rodrigo.vivi@intel.com

The comments match an earlier version of the patch, fix them to match
the current state.
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1498750622-14023-6-git-send-email-imre.deak@intel.com

So far in an attempt to make sure all power wells get disabled during
display uninitialization the driver removed any secondary request bits
(BIOS, KVMR, DEBUG) that were set for a given power well. The known
source for these requests was DMC's request on power well 1 and the misc
IO power well. Since DMC is inactive (DC states are disabled) at the
point we disable these power wells, there shouldn't be any reason to
leave them on. However there are two problems with the above
assumption: Bspec requires that the misc IO power well stays enabled
(without providing a reason) and there can be KVMR requests that we
can't remove anyway (the KVMR request register is R/O). Atm, a KVMR
request can trigger a timeout WARN when trying to disable power wells.

To make the code aligned to Bspec and to get rid of the KVMR WARN, don't
try to remove the secondary requests, only detect them and stop polling
for the power well disabled state when any one is set.

Also add a comment about the timeout values required by Bspec when
enabling power wells and the fact that waiting for them to get disabled
is not required by Bspec.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=98564Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1498750622-14023-5-git-send-email-imre.deak@intel.com

What we want to assert based on the conditions required by Bspec is that
power well 2 is disabled, so no need to check for other power wells.
In addition we can only check if the driver's request is removed, the
actual state depends on whether the other request bits are set or not
(BIOS, KVMR, DEBUG). So check only the driver's request bit.
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1498750622-14023-4-git-send-email-imre.deak@intel.com

Bspec requires leaving the misc IO power well enabled during display
uninit, so align the code accordingly.
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1498750622-14023-3-git-send-email-imre.deak@intel.com

Bspec requires a 10 us delay after disabling power well 1 and - if not
toggled on-demand - the AUX IO power wells during display uninit.
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1498750622-14023-2-git-send-email-imre.deak@intel.com

Currently, we move all unreferenced contexts to an RCU free list and
then onto a worker for eventual reaping. To compensate against this
growing into a long list with frequent allocations starving the system
of available memory, before we allocate a new context we reap all the
stale contexts. This puts all the cost of destroying the context into
the next allocator, which is presumably more sensitive to syscall
latency and unfair. We can limit the number of contexts being freed by
the new allocator to both keep the list trimmed and to allow the
allocator to be reasonably fast.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170705142634.18554-4-chris@chris-wilson.co.ukReviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>

Before we create a new context, we try and reap all the stale contexts
(i.e. those that are freed but waiting for a worker to come and return
their allocations to the system). Before we do this, we retire all
requests so that we clear any inflight no longer used contexts (who are
only being kept alived by those inflght requests). However, any context
that is finally unreferenced by this retirement is put onto an RCU list
and not available for immediately reaping, we stall for no immediate
benefit.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170705142634.18554-3-chris@chris-wilson.co.ukReviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>

We need to reap the stale contexts for all new contexts, be they created
by user in i915_gem_context_ioctl or from opening a new file in
i915_gem_context_open. Both paths may be called very frequently
accumulating many stale contexts before any worker has a chance to run
and free their memory.

Fixes: 1acfc104 ("drm/i915: Enable rcu-only context lookups")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170705142634.18554-2-chris@chris-wilson.co.uk

Avoid any pointer dereference in inspecting a potential PTR_ERR by
checking for the error pointer before checking for an invalid context.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170705142634.18554-1-chris@chris-wilson.co.uk

In a IGD passthrough environment, the real ISA bridge may doesn't exist.
then pch_id couldn't be correctly gotten from ISA bridge, but pch_id is
used to identify LPT_H and LPT_LP. Currently i915 treat all LPT pch as
LPT_H,then errors occur when i915 runs on LPT_LP machines with igd
passthrough.

This patch set pch_id for HSW/BDW according to IGD type and isn't fully
correct. But it solves such issue on HSW/BDW ult/ulx machines.
QA CI system is blocked by this issue for a long time, it's better that
we could merge it to unblock QA CI system.

We know the root cause is in device model of virtual passthrough, and
will resolve it in the future with several parts cooperation in kernel,
qemu and xen.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=99938Signed-off-by: Xiong Zhang <xiong.y.zhang@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1497496305-5364-1-git-send-email-xiong.y.zhang@intel.com

attribute_groups are not supposed to change at runtime. All functions
working with attribute_groups provided by <linux/sysfs.h> work with const
attribute_group. So mark the non-const structs as const.

File size before:
   text	   data	    bss	    dec	    hex	filename
   4028	   1088	      0	   5116	   13fc	drivers/gpu/drm/i915/i915_sysfs.o

File size After adding 'const':
   text	   data	    bss	    dec	    hex	filename
   4196	    928	      0	   5124	   1404	drivers/gpu/drm/i915/i915_sysfs.o
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/13b5c875e677c10e6257be4fac31b2b6c77a494f.1499079914.git.arvind.yadav.cs@gmail.com

the drm_file parameter is unused, so remove it.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Dave Airlie <airlied@redhat.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>

Fixes for 4.13:
- Various fixes for Raven
- Various fixes for Vega10
- Stability fixes for KIQ
- Fix reloading the driver
- Fix S3 on vega10
- Misc other fixes

* 'drm-next-4.13' of git://people.freedesktop.org/~agd5f/linux: (26 commits)
  drm/amd/powerplay: fix bug fail to remove sysfs when rmmod amdgpu.
  amdgpu: Set cik/si_support to 1 by default if radeon isn't built
  drm/amdgpu/gfx9: fix driver reload with KIQ
  drm/amdgpu/gfx8: fix driver reload with KIQ
  drm/amdgpu: Don't call amd_powerplay_destroy() if we don't have powerplay
  drm/ttm: Fix use-after-free in ttm_bo_clean_mm
  drm/amd/amdgpu: move get memory type function from early init to sw init
  drm/amdgpu/cgs: always set reference clock in mode_info
  drm/amdgpu: fix vblank_time when displays are off
  drm/amd/powerplay: power value format change for Vega10
  drm/amdgpu/gfx9: support the amdgpu.disable_cu option
  drm/amd/powerplay: change PPSMC_MSG_GetCurrPkgPwr for Vega10
  drm/amdgpu: Make amdgpu_cs_parser_init static (v2)
  drm/amdgpu/cs: fix a typo in a comment
  drm/amdgpu: Fix the exported always on CU bitmap
  drm/amdgpu/gfx9: gfx_v9_0_enable_gfx_static_mg_power_gating() can be static
  drm/amdgpu/psp: upper_32_bits/lower_32_bits for address setup
  drm/amd/powerplay/cz: print message if smc message fails
  drm/amdgpu: fix typo in amdgpu_debugfs_test_ib_init
  drm/amdgpu: enable mmhub pg on raven
  ...

when hw_fini, pp will disable dpm.so remove sysfs before
disable dpm.
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Tested-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

It was required to explicitly set these parameters to 1, even if the
radeon driver isn't built at all, which is not intuitive.
Reported-by: Shawn Starr <shawn.starr@rogers.com>
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Drop the KCQ disabling via KIQ.  We disable the MEC shortly
after anyway, so there is no need to wait for all of this.
Doing so seems to leave the MEC in a bad way.
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>