- 18 Dec, 2012 40 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfsLinus Torvalds authored
Pull btrfs update from Chris Mason: "A big set of fixes and features. In terms of line count, most of the code comes from Stefan, who added the ability to replace a single drive in place. This is different from how btrfs normally replaces drives, and is much much much faster. Josef is plowing through our synchronous write performance. This pull request does not include the DIO_OWN_WAITING patch that was discussed on the list, but it has a number of other improvements to cut down our latencies and CPU time during fsync/O_DIRECT writes. Miao Xie has a big series of fixes and is spreading out ordered operations over more CPUs. This improves performance and reduces contention. I've put in fixes for error handling around hash collisions. These are going back to individual stable kernels as I test against them. Otherwise we have a lot of fixes and cleanups, thanks everyone! raid5/6 is being rebased against the device replacement code. I'll have it posted this Friday along with a nice series of benchmarks." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: (115 commits) Btrfs: fix a bug of per-file nocow Btrfs: fix hash overflow handling Btrfs: don't take inode delalloc mutex if we're a free space inode Btrfs: fix autodefrag and umount lockup Btrfs: fix permissions of empty files not affected by umask Btrfs: put raid properties into global table Btrfs: fix BUG() in scrub when first superblock reading gives EIO Btrfs: do not call file_update_time in aio_write Btrfs: only unlock and relock if we have to Btrfs: use tokens where we can in the tree log Btrfs: optimize leaf_space_used Btrfs: don't memset new tokens Btrfs: only clear dirty on the buffer if it is marked as dirty Btrfs: move checks in set_page_dirty under DEBUG Btrfs: log changed inodes based on the extent map tree Btrfs: add path->really_keep_locks Btrfs: do not mark ems as prealloc if we are writing to them Btrfs: keep track of the extents original block length Btrfs: inline csums if we're fsyncing Btrfs: don't bother copying if we're only logging the inode ...
-
git://git.linux-nfs.org/projects/trondmy/linux-nfsLinus Torvalds authored
Pull NFS client updates from Trond Myklebust: "Features include: - Full audit of BUG_ON asserts in the NFS, SUNRPC and lockd client code. Remove altogether where possible, and replace with WARN_ON_ONCE and appropriate error returns where not. - NFSv4.1 client adds session dynamic slot table management. There is matching server side code that has been submitted to Bruce for consideration. Together, this code allows the server to dynamically manage the amount of memory it allocates to the duplicate request cache for each client. It will constantly resize those caches to reserve more memory for clients that are hot while shrinking caches for those that are quiescent. In addition, there are assorted bugfixes for the generic NFS write code, fixes to deal with the drop_nlink() warnings, and yet another fix for NFSv4 getacl." * tag 'nfs-for-3.8-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: (106 commits) SUNRPC: continue run over clients list on PipeFS event instead of break NFS: Don't use SetPageError in the NFS writeback code SUNRPC: variable 'svsk' is unused in function bc_send_request SUNRPC: Handle ECONNREFUSED in xs_local_setup_socket NFSv4.1: Deal effectively with interrupted RPC calls. NFSv4.1: Move the RPC timestamp out of the slot. NFSv4.1: Try to deal with NFS4ERR_SEQ_MISORDERED. NFS: nfs_lookup_revalidate should not trust an inode with i_nlink == 0 NFS: Fix calls to drop_nlink() NFS: Ensure that we always drop inodes that have been marked as stale nfs: Remove unused list nfs4_clientid_list nfs: Remove duplicate function declaration in internal.h NFS: avoid NULL dereference in nfs_destroy_server SUNRPC handle EKEYEXPIRED in call_refreshresult SUNRPC set gss gc_expiry to full lifetime nfs: fix page dirtying in NFS DIO read codepath nfs: don't zero out the rest of the page if we hit the EOF on a DIO READ NFSv4.1: Be conservative about the client highest slotid NFSv4.1: Handle NFS4ERR_BADSLOT errors correctly nfs: don't extend writes to cover entire page if pagecache is invalid ... -
git://neil.brown.name/mdLinus Torvalds authored
Pull md update from Neil Brown: "Mostly just little fixes. Probably biggest part is AVX accelerated RAID6 calculations." * tag 'md-3.8' of git://neil.brown.name/md: md/raid5: add blktrace calls md/raid5: use async_tx_quiesce() instead of open-coding it. md: Use ->curr_resync as last completed request when cleanly aborting resync. lib/raid6: build proper files on corresponding arch lib/raid6: Add AVX2 optimized gen_syndrome functions lib/raid6: Add AVX2 optimized recovery functions md: Update checkpoint of resync/recovery based on time. md:Add place to update ->recovery_cp. md.c: re-indent various 'switch' statements. md: close race between removing and adding a device. md: removed unused variable in calc_sb_1_csm.
-
Linus Torvalds authored
Merge misc patches from Andrew Morton: "Incoming: - lots of misc stuff - backlight tree updates - lib/ updates - Oleg's percpu-rwsem changes - checkpatch - rtc - aoe - more checkpoint/restart support I still have a pile of MM stuff pending - Pekka should be merging later today after which that is good to go. A number of other things are twiddling thumbs awaiting maintainer merges." * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (180 commits) scatterlist: don't BUG when we can trivially return a proper error. docs: update documentation about /proc/<pid>/fdinfo/<fd> fanotify output fs, fanotify: add @mflags field to fanotify output docs: add documentation about /proc/<pid>/fdinfo/<fd> output fs, notify: add procfs fdinfo helper fs, exportfs: add exportfs_encode_inode_fh() helper fs, exportfs: escape nil dereference if no s_export_op present fs, epoll: add procfs fdinfo helper fs, eventfd: add procfs fdinfo helper procfs: add ability to plug in auxiliary fdinfo providers tools/testing/selftests/kcmp/kcmp_test.c: print reason for failure in kcmp_test breakpoint selftests: print failure status instead of cause make error kcmp selftests: print fail status instead of cause make error kcmp selftests: make run_tests fix mem-hotplug selftests: print failure status instead of cause make error cpu-hotplug selftests: print failure status instead of cause make error mqueue selftests: print failure status instead of cause make error vm selftests: print failure status instead of cause make error ubifs: use prandom_bytes mtd: nandsim: use prandom_bytes ...
-
Eric W. Biederman authored
When compiling efivars.c the build fails with: CC drivers/firmware/efivars.o drivers/firmware/efivars.c: In function ‘efivarfs_get_inode’: drivers/firmware/efivars.c:886:31: error: incompatible types when assigning to type ‘kgid_t’ from type ‘int’ make[2]: *** [drivers/firmware/efivars.o] Error 1 make[1]: *** [drivers/firmware/efivars.o] Error 2 Fix the build error by removing the duplicate initialization of i_uid and i_gid inode_init_always has already initialized them to 0. Signed-off-by:
"Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Stephen Rothwell authored
This build error is currently hidden by the fact that the x86 implementation of 'update_mmu_cache_pmd()' is a macro that doesn't use its last argument, but commit b32967ff ("mm: numa: Add THP migration for the NUMA working set scanning fault case") introduced a call with the wrong third argument. In the akpm tree, it causes this build error: mm/migrate.c: In function 'migrate_misplaced_transhuge_page_put': mm/migrate.c:1666:2: error: incompatible type for argument 3 of 'update_mmu_cache_pmd' arch/x86/include/asm/pgtable.h:792:20: note: expected 'struct pmd_t *' but argument is of type 'pmd_t' Fix it. Signed-off-by:
Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by:
-
Nick Bowler authored
There is absolutely no reason to crash the kernel when we have a perfectly good return value already available to use for conveying failure status. Let's return an error code instead of crashing the kernel: that sounds like a much better plan. [akpm@linux-foundation.org: s/E2BIG/EINVAL/] Signed-off-by:
Nick Bowler <nbowler@elliptictech.com> Cc: Maxim Levitsky <maximlevitsky@gmail.com> Cc: Tejun Heo <tj@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
Cyrill Gorcunov authored
Signed-off-by:
Cyrill Gorcunov <gorcunov@openvz.org> Cc: Pavel Emelyanov <xemul@parallels.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andrey Vagin <avagin@openvz.org> Cc: Al Viro <viro@ZenIV.linux.org.uk> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: James Bottomley <jbottomley@parallels.com> Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: Matthew Helsley <matt.helsley@gmail.com> Cc: "J. Bruce Fields" <bfields@fieldses.org> Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@onelan.co.uk> Signed-off-by:
-
Cyrill Gorcunov authored
The kernel keeps FAN_MARK_IGNORED_SURV_MODIFY bit separately from fsnotify_mark::mask|ignored_mask thus put it in @mflags (mark flags) field so the user-space reader will be able to detect if such bit were used on mark creation procedure. | pos: 0 | flags: 04002 | fanotify flags:10 event-flags:0 | fanotify mnt_id:12 mflags:40 mask:38 ignored_mask:40000003 | fanotify ino:4f969 sdev:800013 mflags:0 mask:3b ignored_mask:40000000 fhandle-bytes:8 fhandle-type:1 f_handle:69f90400c275b5b4 Signed-off-by:
-
Cyrill Gorcunov authored
[akpm@linux-foundation.org: tweak documentation] Signed-off-by:
-
Cyrill Gorcunov authored
This allow us to print out fsnotify details such as watchee inode, device, mask and optionally a file handle. For inotify objects if kernel compiled with exportfs support the output will be | pos: 0 | flags: 02000000 | inotify wd:3 ino:9e7e sdev:800013 mask:800afce ignored_mask:0 fhandle-bytes:8 fhandle-type:1 f_handle:7e9e0000640d1b6d | inotify wd:2 ino:a111 sdev:800013 mask:800afce ignored_mask:0 fhandle-bytes:8 fhandle-type:1 f_handle:11a1000020542153 | inotify wd:1 ino:6b149 sdev:800013 mask:800afce ignored_mask:0 fhandle-bytes:8 fhandle-type:1 f_handle:49b1060023552153 If kernel compiled without exportfs support, the file handle won't be provided but inode and device only. | pos: 0 | flags: 02000000 | inotify wd:3 ino:9e7e sdev:800013 mask:800afce ignored_mask:0 | inotify wd:2 ino:a111 sdev:800013 mask:800afce ignored_mask:0 | inotify wd:1 ino:6b149 sdev:800013 mask:800afce ignored_mask:0 For fanotify the output is like | pos: 0 | flags: 04002 | fanotify flags:10 event-flags:0 | fanotify mnt_id:12 mask:3b ignored_mask:0 | fanotify ino:50205 sdev:800013 mask:3b ignored_mask:40000000 fhandle-bytes:8 fhandle-type:1 f_handle:05020500fb1d47e7 To minimize impact on general fsnotify code the new functionality is gathered in fs/notify/fdinfo.c file. Signed-off-by:
Pavel Emelyanov <xemul@parallels.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andrey Vagin <avagin@openvz.org> Cc: Al Viro <viro@ZenIV.linux.org.uk> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: James Bottomley <jbottomley@parallels.com> Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: Matthew Helsley <matt.helsley@gmail.com> Cc: "J. Bruce Fields" <bfields@fieldses.org> Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@onelan.co.uk> Signed-off-by:
-
Cyrill Gorcunov authored
We will need this helper in the next patch to provide a file handle for inotify marks in /proc/pid/fdinfo output. The patch is rather providing the way to use inodes directly when dentry is not available (like in case of inotify system). Signed-off-by:
-
Cyrill Gorcunov authored
This routine will be used to generate a file handle in fdinfo output for inotify subsystem, where if no s_export_op present the general export_encode_fh should be used. Thus add a test if s_export_op present inside exportfs_encode_fh itself. Signed-off-by:
-
Cyrill Gorcunov authored
This allows us to print out eventpoll target file descriptor, events and data, the /proc/pid/fdinfo/fd consists of | pos: 0 | flags: 02 | tfd: 5 events: 1d data: ffffffffffffffff enabled: 1 [avagin@: fix for unitialized ret variable] Signed-off-by:
-
Cyrill Gorcunov authored
This allows us to print out raw counter value. The /proc/pid/fdinfo/fd output is | pos: 0 | flags: 04002 | eventfd-count: 5a Signed-off-by:
-
Cyrill Gorcunov authored
This patch brings ability to print out auxiliary data associated with file in procfs interface /proc/pid/fdinfo/fd. In particular further patches make eventfd, evenpoll, signalfd and fsnotify to print additional information complete enough to restore these objects after checkpoint. To simplify the code we add show_fdinfo callback inside struct file_operations (as Al and Pavel are proposing). Signed-off-by:
-
Dave Jones authored
I was curious why sys_kcmp wasn't working, which led me to the testcase. It turned out I hadn't enabled CHECKPOINT_RESTORE in the kernel I was testing. Add a decoding of errno to the testcase to make that obvious. Signed-off-by:
Dave Jones <davej@redhat.com> Acked-by:
-
Dave Young authored
In case breakpoint test exit non zero value it will cause make error. Better way is just print the test failure status. Signed-off-by:
Dave Young <dyoung@redhat.com> Reviewed-by:
Pekka Enberg <penberg@kernel.org> Signed-off-by:
-
Dave Young authored
In case kcmp_test exit non zero value it will cause make error. Better way is just print the test failure status. Signed-off-by:
-
Dave Young authored
make run_tests need the target is run_tests instead of run-tests Also gcc output should be kcmp_test. Fix these two issues. Signed-off-by:
-
Dave Young authored
Original behavior: bash-4.1$ make -C memory-hotplug run_tests make: Entering directory `/home/dave/git/linux-2.6/tools/testing/selftests/memory-hotplug' ./on-off-test.sh make: execvp: ./on-off-test.sh: Permission denied make: *** [run_tests] Error 127 make: Leaving directory `/home/dave/git/linux-2.6/tools/testing/selftests/memory-hotplug' After applying the patch: bash-4.1$ make -C memory-hotplug run_tests make: Entering directory `/home/dave/git/linux-2.6/tools/testing/selftests/memory-hotplug' /bin/sh: ./on-off-test.sh: Permission denied memory-hotplug selftests: [FAIL] make: Leaving directory `/home/dave/git/linux-2.6/tools/testing/selftests/memory-hotplug' Signed-off-by:
-
Dave Young authored
Original behavior: bash-4.1$ make -C cpu-hotplug run_tests make: Entering directory `/home/dave/git/linux-2.6/tools/testing/selftests/cpu-hotplug' ./on-off-test.sh make: execvp: ./on-off-test.sh: Permission denied make: *** [run_tests] Error 127 make: Leaving directory `/home/dave/git/linux-2.6/tools/testing/selftests/cpu-hotplug' After applying the patch: bash-4.1$ make -C cpu-hotplug run_tests make: Entering directory `/home/dave/git/linux-2.6/tools/testing/selftests/cpu-hotplug' /bin/sh: ./on-off-test.sh: Permission denied cpu-hotplug selftests: [FAIL] make: Leaving directory `/home/dave/git/linux-2.6/tools/testing/selftests/cpu-hotplug' Signed-off-by:
-
Dave Young authored
Original behavior: bash-4.1$ make -C mqueue run_tests make: Entering directory `/home/dave/git/linux-2.6/tools/testing/selftests/mqueue' ./mq_open_tests /test1 Not running as root, but almost all tests require root in order to modify system settings. Exiting. make: *** [run_tests] Error 1 make: Leaving directory `/home/dave/git/linux-2.6/tools/testing/selftests/mqueue' After applying the patch: bash-4.1$ make -C mqueue run_tests make: Entering directory `/home/dave/git/linux-2.6/tools/testing/selftests/mqueue' Not running as root, but almost all tests require root in order to modify system settings. Exiting. mq_open_tests: [FAIL] Not running as root, but almost all tests require root in order to modify system settings. Exiting. mq_perf_tests: [FAIL] make: Leaving directory `/home/dave/git/linux-2.6/tools/testing/selftests/mqueue' Signed-off-by:
-
Dave Young authored
Original behavior: bash-4.1$ make -C vm run_tests make: Entering directory `/home/dave/git/linux-2.6/tools/testing/selftests/vm' /bin/sh ./run_vmtests ./run_vmtests: line 24: /proc/sys/vm/nr_hugepages: Permission denied Please run this test as root make: *** [run_tests] Error 1 make: Leaving directory `/home/dave/git/linux-2.6/tools/testing/selftests/vm' After applying the patch: bash-4.1$ make -C vm run_tests make: Entering directory `/home/dave/git/linux-2.6/tools/testing/selftests/vm' ./run_vmtests: line 24: /proc/sys/vm/nr_hugepages: Permission denied Please run this test as root vmtests: [FAIL] make: Leaving directory `/home/dave/git/linux-2.6/tools/testing/selftests/vm' Signed-off-by:
-
Akinobu Mita authored
This also converts filling memory loop to use memset. Signed-off-by:
Akinobu Mita <akinobu.mita@gmail.com> Cc: Artem Bityutskiy <dedekind1@gmail.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: "Theodore Ts'o" <tytso@mit.edu> Cc: David Laight <david.laight@aculab.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Eilon Greenstein <eilong@broadcom.com> Cc: Michel Lespinasse <walken@google.com> Cc: Robert Love <robert.w.love@intel.com> Cc: Valdis Kletnieks <valdis.kletnieks@vt.edu> Signed-off-by:
-
Akinobu Mita authored
This also removes unnecessary memset call which is immediately overwritten with random bytes. Signed-off-by:
-
Akinobu Mita authored
Use prandom_bytes() to fill rss key with pseudo-random bytes. Signed-off-by:
-
Akinobu Mita authored
Add functions to get the requested number of pseudo-random bytes. The difference from get_random_bytes() is that it generates pseudo-random numbers by prandom_u32(). It doesn't consume the entropy pool, and the sequence is reproducible if the same rnd_state is used. So it is suitable for generating random bytes for testing. Signed-off-by:
-
Akinobu Mita authored
This renames all random32 functions to have 'prandom_' prefix as follows: void prandom_seed(u32 seed); /* rename from srandom32() */ u32 prandom_u32(void); /* rename from random32() */ void prandom_seed_state(struct rnd_state *state, u64 seed); /* rename from prandom32_seed() */ u32 prandom_u32_state(struct rnd_state *state); /* rename from prandom32() */ The purpose of this renaming is to prevent some kernel developers from assuming that prandom32() and random32() might imply that only prandom32() was the one using a pseudo-random number generator by prandom32's "p", and the result may be a very embarassing security exposure. This concern was expressed by Theodore Ts'o. And furthermore, I'm going to introduce new functions for getting the requested number of pseudo-random bytes. If I continue to use both prandom32 and random32 prefixes for these functions, the confusion is getting worse. As a result of this renaming, "prandom_" is the common prefix for pseudo-random number library. Currently, srandom32() and random32() are preserved because it is difficult to rename too many users at once. Signed-off-by:
-
Dan Carpenter authored
We should return NULL on failure instead of returning a freed pointer. Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Cc: Ed Cashin <ecashin@coraid.com> Signed-off-by:
-
Ed Cashin authored
This version number is printed to the console on module initialization and is available in sysfs, which is where the userland aoe-version tool looks for it. Signed-off-by:
Ed Cashin <ecashin@coraid.com> Cc: Jens Axboe <axboe@kernel.dk> Signed-off-by:
-
Ed Cashin authored
This change only affects experimental AoE storage networks. It modifies the console message about runt packets detected so that the AoE major and minor addresses of the AoE target that generated the runt are mentioned. Signed-off-by:
-
Ed Cashin authored
By default, the aoe driver uses any ethernet interface for AoE, but the aoe_iflist module parameter provides a convenient way to limit AoE traffic to a specific list of local network interfaces. This change allows a list to be specified using the comma character as a separator. For example, modprobe aoe aoe_iflist=eth2,eth3 Before, it was inconvenient to get the quoting right in shell scripts when setting aoe_iflist to have more than one network interface. Signed-off-by:
-
Ed Cashin authored
With this change, the aoe driver treats the value zero as special for the aoe_deadsecs module parameter. Normally, this value specifies the number of seconds during which the driver will continue to attempt retransmits to an unresponsive AoE target. After aoe_deadsecs has elapsed, the aoe driver marks the aoe device as "down" and fails all I/O. The new meaning of an aoe_deadsecs of zero is for the driver to retransmit commands indefinitely. Signed-off-by:
-
Ed Cashin authored
Many AoE targets have four or fewer network ports, but some existing storage devices have many, and the AoE protocol sets no limit. This patch allows the use of more than eight remote MAC addresses per AoE target, while reducing the amount of memory used by the aoe driver in cases where there are many AoE targets with fewer than eight MAC addresses each. Signed-off-by:
-
Ed Cashin authored
This change avoids a race that could result in a NULL pointer derference following a WARNing from kobject_add_internal, "don't try to register things with the same name in the same directory." The problem was found with a test that forgets and discovers an aoe device in a loop: while test ! -r /tmp/stop; do aoe-flush -a aoe-discover done The race was between aoedev_flush taking aoedevs out of the devlist, allowing a new discovery of the same AoE target to take place before the driver gets around to calling sysfs_remove_group. Fixing that one revealed another race between do_open and add_disk, and this patch avoids that, too. The fix required some care, because for flushing (forgetting) an aoedev, some of the steps must be performed under lock and some must be able to sleep. Also, for discovering a new aoedev, some steps might sleep. The check for a bad aoedev pointer remains from a time when about half of this patch was done, and it was possible for the bdev->bd_disk->private_data to become corrupted. The check should be removed eventually, but it is not expected to add significant overhead, occurring in the aoeblk_open routine. Signed-off-by:
-
Ed Cashin authored
An AoE target can have multiple network ports used for AoE, and in the aoe driver, those are tracked by the aoetgt struct. These changes allow the aoe driver to handle network paths, or aoetgts, that are not working well, compared to the others. Paths that do not get responses despite the retransmission of AoE commands are marked as "tainted", and non-tainted paths are preferred. Meanwhile, the aoe driver attempts to "probe" the tainted path in the background by issuing reads of LBA 0 that are padded out to full (possibly jumbo-frame) size. If the probes get responses, then the path is "redeemed", and its taint is removed. This mechanism has been shown to be helpful in transparently handling and recovering from real-world network "brown outs" in ways that the earlier "shoot the help-needing target in the head" mechanism could not. Signed-off-by:
-
Ed Cashin authored
The value returned by the static minor device number number allocator is the real minor number, so it must be multiplied by the supported number of partitions per aoedev. Without this fix the support for systems without udev is incomplete, and the few users of aoe on such systems will have surprising results when device nodes names do not match the AoE target. Signed-off-by:
-
Ed Cashin authored
Because the minor_get and related functions use the return values for errors, the compiler doesn't know that sysminor will always either 1) be initialized in aoedev_by_aoeaddr by the call to minor_get, or 2) be unused as the "goto out" is executed. This patch avoids the compiler warning. Signed-off-by:
-
Ed Cashin authored
For some special-purpose systems where udev isn't present, static allocation of minor numbers is desirable. This update distinguishes different failure scenarios, to help the user understand what went wrong. Signed-off-by:
-
