- 03 Mar, 2021 1 commit
-
-
Wei Yongjun authored
Make sure dmi_system_id tables are NULL terminated. This crashed when LTO was enabled: BUG: KASAN: global-out-of-bounds in dmi_check_system+0x5a/0x70 Read of size 1 at addr ffffffffc16af750 by task NetworkManager/1913 CPU: 4 PID: 1913 Comm: NetworkManager Not tainted 5.12.0-rc1+ #10057 Hardware name: LENOVO 20THCTO1WW/20THCTO1WW, BIOS N2VET27W (1.12 ) 12/21/2020 Call Trace: dump_stack+0x90/0xbe print_address_description.constprop.0+0x1d/0x140 ? dmi_check_system+0x5a/0x70 ? dmi_check_system+0x5a/0x70 kasan_report.cold+0x7b/0xd4 ? dmi_check_system+0x5a/0x70 __asan_load1+0x4d/0x50 dmi_check_system+0x5a/0x70 iwl_mvm_up+0x1360/0x1690 [iwlmvm] ? iwl_mvm_send_recovery_cmd+0x270/0x270 [iwlmvm] ? setup_object.isra.0+0x27/0xd0 ? kasan_poison+0x20/0x50 ? ___slab_alloc.constprop.0+0x483/0x5b0 ? mempool_kmalloc+0x17/0x20 ? ftrace_graph_ret_addr+0x2a/0xb0 ? kasan_poison+0x3c/0x50 ? cfg80211_iftype_allowed+0x2e/0x90 [cfg80211] ? __kasan_check_write+0x14/0x20 ? mutex_lock+0x86/0xe0 ? __mutex_lock_slowpath+0x20/0x20 __iwl_mvm_mac_start+0x49/0x290 [iwlmvm] iwl_mvm_mac_start+0x37/0x50 [iwlmvm] drv_start+0x73/0x1b0 [mac80211] ieee80211_do_open+0x53e/0xf10 [mac80211] ? ieee80211_check_concurrent_iface+0x266/0x2e0 [mac80211] ieee80211_open+0xb9/0x100 [mac80211] __dev_open+0x1b8/0x280 Fixes: a2ac0f48 ("iwlwifi: mvm: implement approved list for the PPAG feature") Reported-by:
Hulk Robot <hulkci@huawei.com> Signed-off-by:
Wei Yongjun <weiyongjun1@huawei.com> Reviewed-by:
Nathan Chancellor <nathan@kernel.org> Tested-by:
Victor Michel <vic.michel.web@gmail.com> Acked-by:
Luca Coelho <luciano.coelho@intel.com> [kvalo@codeaurora.org: improve commit log] Signed-off-by:
Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210223140039.1708534-1-weiyongjun1@huawei.com
-
- 26 Feb, 2021 4 commits
-
-
Arnd Bergmann authored
clang points out a possible corner case in the mt7915_tm_set_tx_cont() function if called with invalid arguments: drivers/net/wireless/mediatek/mt76/mt7915/testmode.c:593:2: warning: variable 'mode' is used uninitialized whenever switch default is taken [-Wsometimes-uninitialized] default: ^~~~~~~ drivers/net/wireless/mediatek/mt76/mt7915/testmode.c:597:13: note: uninitialized use occurs here rateval = mode << 6 | rate_idx; ^~~~ drivers/net/wireless/mediatek/mt76/mt7915/testmode.c:506:37: note: initialize the variable 'mode' to silence this warning u8 rate_idx = td->tx_rate_idx, mode; ^ Change it to return an error instead of continuing with invalid data here. Fixes: 3f0caa3c ("mt76: mt7915: add support for continuous tx in testmode") Signed-off-by:Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
Lorenzo Bianconi authored
Commit b102f0c5 ("mt76: fix array overflow on receiving too many fragments for a packet") fixes a possible OOB access but it introduces a memory leak since the pending frame is not released to page_frag_cache if the frag array of skb_shared_info is full. Commit 93a1d479 ("mt76: dma: fix a possible memory leak in mt76_add_fragment()") fixes the issue but does not free the truncated skb that is forwarded to mac80211 layer. Fix the leftover issue discarding even truncated skbs. Fixes: 93a1d479 ("mt76: dma: fix a possible memory leak in mt76_add_fragment()") Signed-off-by:
Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by:
-
Arnd Bergmann authored
Clang points out a mistake in the error handling in mt7921_mcu_tx_rate_report(), which tries to dereference a pointer that cannot be initialized because of the error that is being handled: drivers/net/wireless/mediatek/mt76/mt7921/mcu.c:409:3: warning: variable 'stats' is uninitialized when used here [-Wuninitialized] stats->tx_rate = rate; ^~~~~ drivers/net/wireless/mediatek/mt76/mt7921/mcu.c:401:32: note: initialize the variable 'stats' to silence this warning struct mt7921_sta_stats *stats; ^ Just remove the obviously incorrect line. Fixes: 1c099ab4 ("mt76: mt7921: add MCU support") Signed-off-by:Nick Desaulniers <ndesaulniers@google.com> Signed-off-by:
-
Kalle Valo authored
Randy reported an error on his randconfig builds: ERROR: modpost: "iwl_so_trans_cfg" [drivers/net/wireless/intel/iwlwifi/iwlwifi.ko] undefined! The problem was that when CONFIG_IWLMVM was disabled we were still accessing iwl_so_trans_cfg. Fix it by moving IS_ENABLED() check before the access. Reported-by:
Randy Dunlap <rdunlap@infradead.org> Fixes: 930be4e7 ("iwlwifi: add support for SnJ with Jf devices") Signed-off-by:
-
- 24 Feb, 2021 3 commits
-
-
Kalle Valo authored
Commit c134d1f8 ("ath11k: Handle errors if peer creation fails") completely broke AP mode on QCA6390: kernel: [ 151.230734] ath11k_pci 0000:06:00.0: failed to create peer after vdev start delay: -22 wpa_supplicant[2307]: Failed to set beacon parameters wpa_supplicant[2307]: Interface initialization failed wpa_supplicant[2307]: wlan0: interface state UNINITIALIZED->DISABLED wpa_supplicant[2307]: wlan0: AP-DISABLED wpa_supplicant[2307]: wlan0: Unable to setup interface. wpa_supplicant[2307]: Failed to initialize AP interface This was because commit c134d1f8 ("ath11k: Handle errors if peer creation fails") added error handling for ath11k_peer_create(), which had been failing all along but was unnoticed due to the missing error handling. The actual bug was introduced already in commit aa44b2f3 ("ath11k: start vdev if a bss peer is already created"). ath11k_peer_create() was failing because for AP mode the peer is created already earlier op_add_interface() and we should skip creation here, but the check for modes was wrong. Fixing that makes AP mode work again. This shouldn't affect IPQ8074 nor QCN9074 as they have hw_params.vdev_start_delay disabled. Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1 Fixes: c134d1f8 ("ath11k: Handle errors if peer creation fails") Signed-off-by:
-
Geert Uytterhoeven authored
If CONFIG_ARCH_DMA_ADDR_T_64BIT=n: drivers/net/wireless/ath/ath11k/qmi.c: In function ‘ath11k_qmi_respond_fw_mem_request’: drivers/net/wireless/ath/ath11k/qmi.c:1690:8: warning: format ‘%llx’ expects argument of type ‘long long unsigned int’, but argument 5 has type ‘dma_addr_t’ {aka ‘unsigned int’} [-Wformat=] 1690 | "qmi req mem_seg[%d] 0x%llx %u %u\n", i, | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 1691 | ab->qmi.target_mem[i].paddr, | ~~~~~~~~~~~~~~~~~~~~~~~~~~~ | | | dma_addr_t {aka unsigned int} drivers/net/wireless/ath/ath11k/debug.h:64:30: note: in definition of macro ‘ath11k_dbg’ 64 | __ath11k_dbg(ar, dbg_mask, fmt, ##__VA_ARGS__); \ | ^~~ drivers/net/wireless/ath/ath11k/qmi.c:1690:34: note: format string is defined here 1690 | "qmi req mem_seg[%d] 0x%llx %u %u\n", i, | ~~~^ | | | long long unsigned int | %x Fixes: d5395a54 ("ath11k: qmi: add debug message for allocated memory segment addresses and sizes") Signed-off-by:Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by:
-
Sharvari Harisangam authored
Add Sharvari Harisangam to Maintainer list. Replace Ganapathi Bhat's email id in Maintainer list. Signed-off-by:
Rakesh Parmar <rakesh.parmar@nxp.com> Signed-off-by:
Sharvari Harisangam <sharvari.harisangam@nxp.com> Acked-by:
Ganapathi Bhat <ganapathi.bhat@nxp.com> Signed-off-by:
-
- 22 Feb, 2021 1 commit
-
-
Johannes Berg authored
If the opmode doesn't support debug collection (DVM) then don't crash, but just skip the callback. Fixes: d0129315 ("iwlwifi: dbg: add op_mode callback for collecting debug data.") Reported-by:
Andy Lavr <andy.lavr@gmail.com> Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
-
- 18 Feb, 2021 3 commits
-
-
Felix Fietkau authored
Modifying the tx buffer list too early can leak DMA mappings Signed-off-by:
Felix Fietkau <nbd@nbd.name> Signed-off-by:
-
Felix Fietkau authored
When running out of room in the tx queue after calling drv->tx_prepare_skb, the buffer list will already have been modified on MT7615 and newer drivers. This can leak a DMA mapping and will show up as swiotlb allocation failures on x86. Fix this by moving the queue length check further up. This is less accurate, since it can overestimate the needed room in the queue on MT7615 and newer, but the difference is small enough to not matter in practice. Signed-off-by:
-
Felix Fietkau authored
When transmitting to a receiver in dynamic SMPS mode, all transmissions that use multiple spatial streams need to be sent using CTS-to-self or RTS/CTS to give the receiver's extra chains some time to wake up. This fixes the tx rate getting stuck at <= MCS7 for some clients, especially Intel ones, which make aggressive use of SMPS. Cc: stable@vger.kernel.org Reported-by:
Martin Kennedy <hurricos@gmail.com> Signed-off-by:
-
- 13 Feb, 2021 28 commits
-
-
David S. Miller authored
Robert Hancock says: ==================== Xilinx axienet updates Updates to the Xilinx AXI Ethernet driver to add support for an additional ethtool operation, and to support dynamic switching between 1000BaseX and SGMII interface modes. ==================== Signed-off-by:David S. Miller <davem@davemloft.net>
-
Robert Hancock authored
Newer versions of the Xilinx AXI Ethernet core (specifically version 7.2 or later) allow the core to be configured with a PHY interface mode of "Both", allowing either 1000BaseX or SGMII modes to be selected at runtime. Add support for this in the driver to allow better support for applications which can use both fiber and copper SFP modules. Signed-off-by:
Robert Hancock <robert.hancock@calian.com> Signed-off-by:
-
Robert Hancock authored
Document the new xlnx,switch-x-sgmii attribute which is used to indicate that the Ethernet core supports dynamic switching between 1000BaseX and SGMII. Signed-off-by:
-
Robert Hancock authored
Hook up the nway_reset ethtool operation to the corresponding phylink function so that "ethtool -r" can be supported. Signed-off-by:
-
David S. Miller authored
Eric Dumazet says: ==================== tcp: mem pressure vs SO_RCVLOWAT First patch fixes an issue for applications using SO_RCVLOWAT to reduce context switches. Second patch is a cleanup. ==================== Signed-off-by: -
Eric Dumazet authored
Both tcp_data_ready() and tcp_stream_is_readable() share the same logic. Add tcp_epollin_ready() helper to avoid duplication. Signed-off-by:
Eric Dumazet <edumazet@google.com> Cc: Arjun Roy <arjunroy@google.com> Cc: Wei Wang <weiwan@google.com> Signed-off-by:
-
Eric Dumazet authored
While commit 24adbc16 ("tcp: fix SO_RCVLOWAT hangs with fat skbs") fixed an issue vs too small sk_rcvbuf for given sk_rcvlowat constraint, it missed to address issue caused by memory pressure. 1) If we are under memory pressure and socket receive queue is empty. First incoming packet is allowed to be queued, after commit 76dfa608 ("tcp: allow one skb to be received per socket under memory pressure") But we do not send EPOLLIN yet, in case tcp_data_ready() sees sk_rcvlowat is bigger than skb length. 2) Then, when next packet comes, it is dropped, and we directly call sk->sk_data_ready(). 3) If application is using poll(), tcp_poll() will then use tcp_stream_is_readable() and decide the socket receive queue is not yet filled, so nothing will happen. Even when sender retransmits packets, phases 2) & 3) repeat and flow is effectively frozen, until memory pressure is off. Fix is to consider tcp_under_memory_pressure() to take care of global memory pressure or memcg pressure. Fixes: 24adbc16 ("tcp: fix SO_RCVLOWAT hangs with fat skbs") Signed-off-by:
Arjun Roy <arjunroy@google.com> Suggested-by:
Wei Wang <weiwan@google.com> Reviewed-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queueDavid S. Miller authored
Tony Nguyen says: ==================== 40GbE Intel Wired LAN Driver Updates 2021-02-12 This series contains updates to i40e, ice, and ixgbe drivers. Maciej does cleanups on the following drivers. For i40e, removes redundant check for XDP prog, cleans up no longer relevant information, and removes an unused function argument. For ice, removes local variable use, instead returning values directly. Moves skb pointer from buffer to ring and removes an unneeded check for xdp_prog in zero copy path. Also removes a redundant MTU check when changing it. For i40e, ice, and ixgbe, stores the rx_offset in the Rx ring as the value is constant so there's no need for continual calls. Bjorn folds a decrement into a while statement. ==================== Signed-off-by: -
David S. Miller authored
Guillaume Nault says: ==================== selftests: tc: Test tc-flower's MPLS features A couple of patches for exercising the MPLS filters of tc-flower. Patch 1 tests basic MPLS matching features: those that only work on the first label stack entry (that is, the mpls_label, mpls_tc, mpls_bos and mpls_ttl options). Patch 2 tests the more generic "mpls" and "lse" options, which allow matching MPLS fields beyond the first stack entry. In both patches, special care is taken to skip these new tests for incompatible versions of tc. ==================== Signed-off-by: -
Guillaume Nault authored
Add tests in tc_flower.sh for generic matching on MPLS Label Stack Entries. The label, tc, bos and ttl fields are tested for the first and second labels. For each field, the minimal and maximal values are tested (the former at depth 1 and the later at depth 2). There are also tests for matching the presence of a label stack entry at a given depth. In order to reduce the amount of code, all "lse" subcommands are tested in match_mpls_lse_test(). Action "continue" is used, so that test packets are evaluated by all filters. Then, we can verify if each filter matched the expected number of packets. Some versions of tc-flower produced invalid json output when dumping MPLS filters with depth > 1. Skip the test if tc isn't recent enough. Signed-off-by:
Guillaume Nault <gnault@redhat.com> Signed-off-by:
-
Guillaume Nault authored
Add tests in tc_flower.sh for mpls_label, mpls_tc, mpls_bos and mpls_ttl. For each keyword, test the minimal and maximal values. Selectively skip these new mpls tests for tc versions that don't support them. Signed-off-by:
-
David S. Miller authored
Vladimir Oltean says: ==================== Cleanup in brport flags switchdev offload for DSA The initial goal of this series was to have better support for standalone ports mode on the DSA drivers like ocelot/felix and sja1105. This turned out to require some API adjustments in both directions: to the information presented to and by the switchdev notifier, and to the API presented to the switch drivers by the DSA layer. ==================== Signed-off-by: -
Vladimir Oltean authored
The chip can configure unicast flooding, broadcast flooding and learning. Learning is per port, while flooding is per {ingress, egress} port pair and we need to configure the same value for all possible ingress ports towards the requested one. While multicast flooding is not officially supported, we can hack it by using a feature of the second generation (P/Q/R/S) devices, which is that FDB entries are maskable, and multicast addresses always have an odd first octet. So by putting a match-all for 00:01:00:00:00:00 addr and 00:01:00:00:00:00 mask at the end of the FDB, we make sure that it is always checked last, and does not take precedence in front of any other MDB. So it behaves effectively as an unknown multicast entry. For the first generation switches, this feature is not available, so unknown multicast will always be treated the same as unknown unicast. So the only thing we can do is request the user to offload the settings for these 2 flags in tandem, i.e. ip link set swp2 type bridge_slave flood off Error: sja1105: This chip cannot configure multicast flooding independently of unicast. ip link set swp2 type bridge_slave flood off mcast_flood off ip link set swp2 type bridge_slave mcast_flood on Error: sja1105: This chip cannot configure multicast flooding independently of unicast. Signed-off-by:Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by:
-
Vladimir Oltean authored
We should not be unconditionally enabling address learning, since doing that is actively detrimential when a port is standalone and not offloading a bridge. Namely, if a port in the switch is standalone and others are offloading the bridge, then we could enter a situation where we learn an address towards the standalone port, but the bridged ports could not forward the packet there, because the CPU is the only path between the standalone and the bridged ports. The solution of course is to not enable address learning unless the bridge asks for it. We need to set up the initial port flags for no learning and flooding everything, and also when the port joins and leaves the bridge. The flood configuration was already configured ok for standalone mode in ocelot_init, we just need to disable learning in ocelot_init_port. Signed-off-by:
Alexandre Belloni <alexandre.belloni@bootlin.com> Reviewed-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
Vladimir Oltean authored
In preparation of offloading the bridge port flags which have independent settings for unknown multicast and for broadcast, we should also start reserving one destination Port Group ID for the flooding of broadcast packets, to allow configuring it individually. Signed-off-by:
-
Vladimir Oltean authored
ocelot_init sets up PGID_MC to include the CPU port module, and that is fine, but the ocelot-8021q tagger removes the CPU port module from the unknown multicast replicator. So after a transition from the default ocelot tagger towards ocelot-8021q and then again towards ocelot, multicast flooding towards the CPU port module will be disabled. Fixes: e21268ef ("net: dsa: felix: perform switch setup for tag_8021q") Signed-off-by:
-
Vladimir Oltean authored
There are multiple ways in which a PORT_BRIDGE_FLAGS attribute can be expressed by the bridge through switchdev, and not all of them can be emulated by DSA mid-layer API at the same time. One possible configuration is when the bridge offloads the port flags using a mask that has a single bit set - therefore only one feature should change. However, DSA currently groups together unicast and multicast flooding in the .port_egress_floods method, which limits our options when we try to add support for turning off broadcast flooding: do we extend .port_egress_floods with a third parameter which b53 and mv88e6xxx will ignore? But that means that the DSA layer, which currently implements the PRE_BRIDGE_FLAGS attribute all by itself, will see that .port_egress_floods is implemented, and will report that all 3 types of flooding are supported - not necessarily true. Another configuration is when the user specifies more than one flag at the same time, in the same netlink message. If we were to create one individual function per offloadable bridge port flag, we would limit the expressiveness of the switch driver of refusing certain combinations of flag values. For example, a switch may not have an explicit knob for flooding of unknown multicast, just for flooding in general. In that case, the only correct thing to do is to allow changes to BR_FLOOD and BR_MCAST_FLOOD in tandem, and never allow mismatched values. But having a separate .port_set_unicast_flood and .port_set_multicast_flood would not allow the driver to possibly reject that. Also, DSA doesn't consider it necessary to inform the driver that a SWITCHDEV_ATTR_ID_BRIDGE_MROUTER attribute was offloaded, because it just calls .port_egress_floods for the CPU port. When we'll add support for the plain SWITCHDEV_ATTR_ID_PORT_MROUTER, that will become a real problem because the flood settings will need to be held statefully in the DSA middle layer, otherwise changing the mrouter port attribute will impact the flooding attribute. And that's _assuming_ that the underlying hardware doesn't have anything else to do when a multicast router attaches to a port than flood unknown traffic to it. If it does, there will need to be a dedicated .port_set_mrouter anyway. So we need to let the DSA drivers see the exact form that the bridge passes this switchdev attribute in, otherwise we are standing in the way. Therefore we also need to use this form of language when communicating to the driver that it needs to configure its initial (before bridge join) and final (after bridge leave) port flags. The b53 and mv88e6xxx drivers are converted to the passthrough API and their implementation of .port_egress_floods is split into two: a function that configures unicast flooding and another for multicast. The mv88e6xxx implementation is quite hairy, and it turns out that the implementations of unknown unicast flooding are actually the same for 6185 and for 6352: behind the confusing names actually lie two individual bits: NO_UNKNOWN_MC -> FLOOD_UC = 0x4 = BIT(2) NO_UNKNOWN_UC -> FLOOD_MC = 0x8 = BIT(3) so there was no reason to entangle them in the first place. Whereas the 6185 writes to MV88E6185_PORT_CTL0_FORWARD_UNKNOWN of PORT_CTL0, which has the exact same bit index. I have left the implementations separate though, for the only reason that the names are different enough to confuse me, since I am not able to double-check with a user manual. The multicast flooding setting for 6185 is in a different register than for 6352 though. Signed-off-by:
-
Vladimir Oltean authored
This switchdev attribute offers a counterproductive API for a driver writer, because although br_switchdev_set_port_flag gets passed a "flags" and a "mask", those are passed piecemeal to the driver, so while the PRE_BRIDGE_FLAGS listener knows what changed because it has the "mask", the BRIDGE_FLAGS listener doesn't, because it only has the final value. But certain drivers can offload only certain combinations of settings, like for example they cannot change unicast flooding independently of multicast flooding - they must be both on or both off. The way the information is passed to switchdev makes drivers not expressive enough, and unable to reject this request ahead of time, in the PRE_BRIDGE_FLAGS notifier, so they are forced to reject it during the deferred BRIDGE_FLAGS attribute, where the rejection is currently ignored. This patch also changes drivers to make use of the "mask" field for edge detection when possible. Signed-off-by:
Grygorii Strashko <grygorii.strashko@ti.com> Reviewed-by:
-
Vladimir Oltean authored
For a DSA switch port operating in standalone mode, address learning doesn't make much sense since that is a bridge function. In fact, address learning even breaks setups such as this one: +---------------------------------------------+ | | | +-------------------+ | | | br0 | send receive | | +--------+-+--------+ +--------+ +--------+ | | | | | | | | | | | | | swp0 | | swp1 | | swp2 | | swp3 | | | | | | | | | | | | +-+--------+-+--------+-+--------+-+--------+-+ | ^ | ^ | | | | | +-----------+ | | | +--------------------------------+ because if the switch has a single FDB (can offload a single bridge) then source address learning on swp3 can "steal" the source MAC address of swp2 from br0's FDB, because learning frames coming from swp2 will be done twice: first on the swp1 ingress port, second on the swp3 ingress port. So the hardware FDB will become out of sync with the software bridge, and when swp2 tries to send one more packet towards swp1, the ASIC will attempt to short-circuit the forwarding path and send it directly to swp3 (since that's the last port it learned that address on), which it obviously can't, because swp3 operates in standalone mode. So DSA drivers operating in standalone mode should still configure a list of bridge port flags even when they are standalone. Currently DSA attempts to call dsa_port_bridge_flags with 0, which disables egress flooding of unknown unicast and multicast, something which doesn't make much sense. For the switches that implement .port_egress_floods - b53 and mv88e6xxx, it probably doesn't matter too much either, since they can possibly inject traffic from the CPU into a standalone port, regardless of MAC DA, even if egress flooding is turned off for that port, but certainly not all DSA switches can do that - sja1105, for example, can't. So it makes sense to use a better common default there, such as "flood everything". It should also be noted that what DSA calls "dsa_port_bridge_flags()" is a degenerate name for just calling .port_egress_floods(), since nothing else is implemented - not learning, in particular. But disabling address learning, something that this driver is also coding up for, will be supported by individual drivers once .port_egress_floods is replaced with a more generic .port_bridge_flags. Previous attempts to code up this logic have been in the common bridge layer, but as pointed out by Ido Schimmel, there are corner cases that are missed when doing that: https://patchwork.kernel.org/project/netdevbpf/patch/20210209151936.97382-5-olteanv@gmail.com/ So, at least for now, let's leave DSA in charge of setting port flags before and after the bridge join and leave. Signed-off-by: -
Vladimir Oltean authored
For the netlink interface, propagate errors through extack rather than simply printing them to the console. For the sysfs interface, we still print to the console, but at least that's one layer higher than in switchdev, which also allows us to silently ignore the offloading of flags if that is ever needed in the future. Signed-off-by:
Nikolay Aleksandrov <nikolay@nvidia.com> Reviewed-by:
-
Vladimir Oltean authored
If for example this command: ip link set swp0 type bridge_slave flood off mcast_flood off learning off succeeded at configuring BR_FLOOD and BR_MCAST_FLOOD but not at BR_LEARNING, there would be no attempt to revert the partial state in any way. Arguably, if the user changes more than one flag through the same netlink command, this one _should_ be all or nothing, which means it should be passed through switchdev as all or nothing. Signed-off-by:
-
Vladimir Oltean authored
When a struct switchdev_attr is notified through switchdev, there is no way to report informational messages, unlike for struct switchdev_obj. Signed-off-by:
Ido Schimmel <idosch@nvidia.com> Reviewed-by:
-
David S. Miller authored
Fixes: 93efb0c6 ("octeontx2-pf: Fix out-of-bounds read in otx2_get_fecparam()") Signed-off-by:
-
David S. Miller authored
Alex Elder says: ==================== net: ipa: some more cleanup Version 3 of this series uses dev_err_probe() in the second patch, as suggested by Heiner Kallweit. Version 2 was sent to ensure the series was based on current net-next/master, and added copyright updates to files touched. The original introduction is below. This is another fairly innocuous set of cleanup patches. The first was motivated by a bug found that would affect IPA v4.5. It maintain a new GSI address pointer; one is the "raw" (original mapped) address, and the other will have been adjusted if necessary for use on newer platforms. The second just quiets some unnecessary noise during early probe. The third fixes some errors that show up when IPA_VALIDATION is enabled. The last two just create helper functions to improve readability. ==================== Signed-off-by: -
Alex Elder authored
Create a simple helper function that indicates whether a channel has been initialized. This abstacts/hides the details of how this is determined. Signed-off-by:
Alex Elder <elder@linaro.org> Signed-off-by:
-
Alex Elder authored
Introduce a new function to abstract the knowledge of whether hashed routing and filter tables are supported for a given IPA instance. IPA v4.2 is the only one that doesn't support hashed tables (now and for the foreseeable future), but the name of the helper function is better for explaining what's going on. Signed-off-by:
-
Alex Elder authored
In ipa_cmd_register_write_valid() we verify that values we will supply to a REGISTER_WRITE IPA immediate command will fit in the fields that need to hold them. This patch fixes some issues in that function and ipa_cmd_register_write_offset_valid(). The dev_err() call in ipa_cmd_register_write_offset_valid() has some printf format errors: - The name of the register (corresponding to the string format specifier) was not supplied. - The IPA base offset and offset need to be supplied separately to match the other format specifiers. Also make the ~0 constant used there to compute the maximum supported offset value explicitly unsigned. There are two other issues in ipa_cmd_register_write_valid(): - There's no need to check the hash flush register for platforms (like IPA v4.2) that do not support hashed tables - The highest possible endpoint number, whose status register offset is computed, is COUNT - 1, not COUNT. Fix these problems, and add some additional commentary. Signed-off-by: -
Alex Elder authored
When initializing the IPA core clock and interconnects, it's possible we'll get an EPROBE_DEFER error. This isn't really an error, it's just means we need to be re-probed later. Use dev_err_probe() to report the error rather than dev_err(). This avoids polluting the log with these "error" messages. Signed-off-by:
-
