- 30 Oct, 2015 10 commits
-
-
Javier Martinez Canillas authored
The ret variable is not needed since is not used in the function. Remove the variable and just return 0 instead. Signed-off-by:
Javier Martinez Canillas <javier@osg.samsung.com> Acked-by:
Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by:
Lee Jones <lee.jones@linaro.org>
-
Javier Martinez Canillas authored
The ret variable is not needed since is not used in the function. Remove the variable and just return 0 instead. Signed-off-by:
-
Grigoryev Denis authored
tps6105 driver provides two cells. One is for GPIO and another one is for selected mode depending on platform data. When tps6105x is used in GPIO-only mode, this driver calls mfd_add_devices() with mfd_cell .name == NULL. This value causes an oops in platform_device_register() later. The following patch adds a mfd_cell for each possible mode thereby excluding .name assignment in runtime. Signed-off-by:
Denis Grigoryev <grigoryev@fastwel.ru> Signed-off-by:
-
Sudeep Holla authored
The driver handles wakeup irq correctly using irq_set_irq_wake. There's no need to use IRQF_NO_SUSPEND while registering the interrupt. This patch removes the use of IRQF_NO_SUSPEND flag. Signed-off-by:
Sudeep Holla <sudeep.holla@arm.com> Signed-off-by:
-
Lee Jones authored
Signed-off-by: -
Lee Jones authored
This patch solves: on x86_64: when CONFIG_ACPI is not enabled: ../drivers/mfd/intel_soc_pmic_bxtwc.c: In function 'bxtwc_probe': ../drivers/mfd/intel_soc_pmic_bxtwc.c:342:2: error: implicit declaration of function 'acpi_evaluate_integer' [-Werror=implicit-function-declaration] status = acpi_evaluate_integer(handle, "_HRV", NULL, &hrv); ^ Reported-by:Randy Dunlap <rdunlap@infradead.org> Signed-off-by:
-
Emilio López authored
Some EC implementations include a small nvram space used to store verified boot context data. This boolean property lets us indicate whether this space is available or not on a specific EC implementation. Signed-off-by:
Emilio López <emilio.lopez@collabora.co.uk> Reviewed-by:
-
Aaron Sierra authored
The lpc_ich_cells array gives the wrong impression about the relationship between the watchdog and GPIO devices. They are completely distinct devices, so this patch separates the array into distinct mfd_cell structs per device. A side effect of removing the array, is that the lpc_cells enum is no longer needed. Signed-off-by:
Aaron Sierra <asierra@xes-inc.com> Acked-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by:
-
Qipeng Zha authored
Add MFD core driver for Intel Broxton Whiskey Cove PMIC, which is specially accessed by hardware IPC, not a generic I2C device Signed-off-by:
Qipeng Zha <qipeng.zha@intel.com> Signed-off-by:
-
Qipeng Zha authored
IRQ control registers of Intel Broxton Whisky Cove PMIC are separated in two parts, so add secondary IRQ chip. And the new member of device will be used in PMC IPC regmap APIs. Signed-off-by:
-
- 26 Oct, 2015 23 commits
-
-
Javier Martinez Canillas authored
The driver has a I2C device id table that is used to create the module aliases which already contains a "rt5033". So the alias is not needed. Signed-off-by:
-
Javier Martinez Canillas authored
The driver has a I2C device id table that is used to create the module aliases and also "bcm590xx" isn't a supported I2C id, so it's never used. Signed-off-by:
-
Enric Balletbo i Serra authored
Add tps65217 battery charger subdevice. Signed-off-by:
Enric Balletbo i Serra <enric.balletbo@collabora.com> Signed-off-by:
-
Charles Keepax authored
Remove defaults for a bunch of volatile registers and remove ARIZONA_CTRL_IF_SPI_CFG_1 from the readable list since it doesn't exist on wm8998 which is I2C only. Signed-off-by:
-
Charles Keepax authored
Some Arizona devices have a hardware ANC block present. This patch adds the registers necessary to configure this hardware block. Signed-off-by:
-
Charles Keepax authored
The type of the data for the main Arizona IRQ chip should be struct arizona not struct regmap_irq_chip_data. The bug is harmless but should probably be corrected anyway. Signed-off-by:
-
Javier Martinez Canillas authored
The driver always checks for pdata being NULL except in one place. Add a check to prevent a possible NULL pointer deference error. Signed-off-by:
-
Krzysztof Kozlowski authored
On Odroid XU3 board (with S2MPS11 PMIC) the PWRHOLD bit in CTRL1 register must be manually set to 0 before initiating power off sequence. One of usual power down methods for Exynos based devices looks like: 1. PWRHOLD pin of PMIC is connected to PSHOLD of Exynos SoC. 2. Exynos holds up this pin during system operation. 3. ACOKB pin of PMIC is pulled up to VBATT and optionally to pin in other device. 4. When PWRHOLD/PSHOLD goes low, the PMIC will turn off the power if ACOKB goes high. On Odroid XU3 family the difference is in (3) - the ACOKB is grounded. This means that PMIC must manually set PWRHOLD field to low and then wait for signal from Application Processor (the usual change in PWRHOLD/PSHOLD pin will actually cut off the power). The patch adds respective binding allowing Odroid XU3 device to be powered off. Signed-off-by:
Krzysztof Kozlowski <k.kozlowski.k@gmail.com> Reported-by:
Anand Moon <linux.amoon@gmail.com> Tested-by:
-
Andy Shevchenko authored
There are already helper functions to do 64-bit I/O on 32-bit machines, thus we don't need to reinvent the wheel. In our case we can't use readq() / writeq() even on 64-bit kernel since there is a hardware limitation (OCP bus is a 32-bit bus). Signed-off-by:
-
Luis de Bethencourt authored
This platform driver has a OF device ID table but the OF module alias information is not created so module autoloading won't work. Signed-off-by:
Luis de Bethencourt <luisbg@osg.samsung.com> Signed-off-by:
-
Luis de Bethencourt authored
This platform driver has a OF device ID table but the OF module alias information is not created so module autoloading won't work. Signed-off-by:
-
Luis de Bethencourt authored
This platform driver has a OF device ID table but the OF module alias information is not created so module autoloading won't work. Signed-off-by:
-
Luis de Bethencourt authored
This platform driver has a OF device ID table but the OF module alias information is not created so module autoloading won't work. Signed-off-by:
-
Nariman Poushin authored
Introduced by: commit 8019ff6c ("regmap: Use reg_sequence for multi_reg_write / register_patch") Interacting with: commit 561629755a21 ("mfd: arizona: Add support for WM8998 and WM1814") commit 81207880 ("mfd: wm5110: Add register patch for rev E and above") Signed-off-by:
Nariman Poushin <nariman@opensource.wolfsonmicro.com> Acked-by:
Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by:
-
Linus Walleij authored
On the STMPE2401 and STMPE2401 altfunction 1 corresponds to the PWM channels. This oneliner was missing in the case-switch, making it impossible to enable the PWM channel output. Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
-
Tony Lindgren authored
Commit 68bab866 ("mfd: twl6040: Optional clk32k clock handling") added clock handling for the 32k clock from palmas-clk. However, that patch did not consider a typical situation where twl6040 is built-in, and palmas-clk is a loadable module like we have in omap2plus_defconfig. If palmas-clk is not loaded before twl6040 probes, we will get a "clk32k is not handled" warning during booting. This means that any drivers relying on this clock will mysteriously fail, including omap5-uevm WLAN and audio. Note that for WLAN, we probably should also eventually get the clk32kgaudio for MMC3 directly as that's shared between audio and WLAN SDIO at least for omap5-uevm. It seems the WLAN chip cannot get it as otherwise MMC3 won't get properly probed. Fixes: 68bab866 ("mfd: twl6040: Optional clk32k clock handling") Signed-off-by:
Tony Lindgren <tony@atomide.com> Reviewed-by:
Felipe Balbi <balbi@ti.com> Signed-off-by:
-
Vaibhav Hiremath authored
Add chip identification support for 88PM860 device to the pm80x_chip_mapping table. Signed-off-by:
Vaibhav Hiremath <vaibhav.hiremath@linaro.org> Reviewed-by:
Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by:
-
Javier Martinez Canillas authored
The Documentation/devicetree/bindings/mfd/cros-ec.txt DT binding doc lists "google,cros-ec-i2c" as a compatible string but the corresponding driver does not have an OF match table. Add the table to the driver so the I2C core can do an OF style match. Signed-off-by:
-
Lee Jones authored
Merge branches 'ib-extcon-mfd-4.4', 'ib-mfd-i2c-v4.4', 'ib-mfd-power-4.4', 'ib-mfd-regmap-4.4' and 'ib-mfd-regulator-4.4' into ibs-for-mfd-merged
-
Andy Shevchenko authored
There is a 24c08 chip connected to i2c bus on Intel Galileo Gen2 board. Enable it via ACPI ID INT3499. Signed-off-by:
Wolfram Sang <wsa@the-dreams.de>
-
Andy Shevchenko authored
On Intel Galileo Gen2 the GPIO expanders are connected to the i2c bus. For those devices the ACPI table has specific parameters that refer to an actual i2c host controller. Since MFD now copes with that specific configuration we have to provide a necessary information how to distinguish devices in ACPI namespace. Here the _ADR values are provided. Acked-by:
-
Andy Shevchenko authored
On Intel Galileo boards the GPIO expander is connected to i2c bus. Moreover it is able to generate interrupt, but interrupt line is connected to GPIO. That's why we have to have GPIO driver in place when we will probe i2c host with device connected to it. Acked-by:
-
Andy Shevchenko authored
There is at least one board on the market, i.e. Intel Galileo Gen2, that uses _ADR to distinguish the devices under one actual device. Due to this we have to improve the quirk in the MFD core to handle that board. Acked-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by:
-
- 13 Oct, 2015 6 commits
-
-
Adam Thomson authored
Suggested-by:
Adam Thomson <Adam.Thomson.Opensource@diasemi.com> Signed-off-by:
-
Adam Thomson authored
When referencing other DT bindings documentation, use relative path rather than absolute. Suggested-by:
-
Adam Thomson authored
Signed-off-by:
Sebastian Reichel <sre@kernel.org> Signed-off-by:
-
Adam Thomson authored
This adds power supply driver support for the Fuel-Gauge part of the DA9150 combined Charger and Fuel-Gauge device. Signed-off-by:
-
Adam Thomson authored
Signed-off-by:
-
Adam Thomson authored
Signed-off-by:
-
- 05 Oct, 2015 1 commit
-
-
Grigoryev Denis authored
This patch modifies tps6105x and associated function driver to use regmap instead of operating directly on i2c. Signed-off-by:
-
