- 17 Jun, 2016 27 commits
-
-
David S. Miller authored
Ursula Braun says: ==================== s390: qeth patches here are patches for the s390 qeth driver for net-next: Patch 01 is a minor improvement for the bridgeport code in qeth. Patches 02-07 take care about scatter/gather handling in qeth. Patch 08 improves handling of multicast IP addresses in the qeth layer3 discipline. Patches 09-11 improve netdev features related functions in qeth. Patch 12 implements an outbound queue restriction for HiperSockets. Patch 13 fixes a wrong indentation in qeth_l3_main.c causing a warning with gcc-6. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Sebastian Ott authored
gcc-6 warns about obviously wrong indentation: drivers/s390/net/qeth_l3_main.c: In function 'qeth_l3_arp_query': drivers/s390/net/qeth_l3_main.c:2315:3: warning: this 'if' clause does not guard... [-Wmisleading-indentation] if (copy_to_user(udata, qinfo.udata, 4)) ^~ drivers/s390/net/qeth_l3_main.c:2317:4: note: ...this statement, but the latter is misleadingly indented as if it is guarded by the 'if' goto free_and_out; ^~~~ Although this particular case is harmless, fix the indentation to get rid of that warning and improve readability. Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Hans Wippel authored
On HiperSockets only outbound queues 0 to 2 are available for unicast packets. Current Priority Queuing implementation in the qeth driver puts outgoing packets in outbound queues 0 to 3. This puts outgoing unicast packets into outbound queue 2 instead of outbound queue 3 when using Priority Queuing on a HiperSocket. Additionally, the default outbound queue cannot be set to outbound queue 3 on HiperSockets. Signed-off-by: Hans Wippel <hwippel@linux.vnet.ibm.com> Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Hans Wippel authored
The function set_features is called to configure network device features on the hardware. If errors occur, the network device features should reflect the changed hardware state and the function should return an error in order to notify the user. In case of an error, the current implementation does not necessarily save the changed hardware state in the network device features before an error is returned. This patch improves error handling by saving features, that could be changed, to the network device features before returning an error. If the device is not running, an additional check in fix_features removes features, that require hardware changes, before they are passed to set_features. Thus, the corresponding check was removed in set_features. Signed-off-by: Hans Wippel <hwippel@linux.vnet.ibm.com> Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Hans Wippel authored
Network device features indicate the capabilities of network devices (e.g., TX checksum offloading and TSO) and their configuration state. Additional network device features (vlan_features) indicate for each network device, which capabilities can be used on VLAN devices, that are configured on the respective base network device. In the current qeth implementation, network device features are only set for the base network devices and not for the VLAN devices. Thus, features like TX checksum offloading cannot be used on VLAN devices. This patch adds network device features to vlan_features, so they can be used by VLAN devices. Signed-off-by: Hans Wippel <hwippel@linux.vnet.ibm.com> Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Thomas Richter authored
This patch introduces a common set of fix_features and set_features functions for layer 2 and layer 3. The RX, TX and TSO offload functionality on the OSA card is enabled using ethtool at user's request and not at device initialization as done before. For layer 3 the RX checksum offloading is disabled at device initialization time. Signed-off-by: Thomas Richter <tmricht@linux.vnet.ibm.com> Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Lakhvich Dmitriy authored
In layer3 mode of the qeth driver, multicast IP addresses from struct net_device and other type of IP addresses from other sources require mapping to the OSA-card. This patch simplifies the IP address mapping logic, and changes imple- mentation of ndo_set_rx_mode callback and ip notifier events. Addresses are stored in private hashtables instead of lists now. It allows hardware registration/removal for new/deleted multicast addresses only. Signed-off-by: Lakhvich Dmitriy <ldmitriy@ru.ibm.com> Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com> Reviewed-by: Evgeny Cherkashin <Eugene.Crosser@ru.ibm.com> Reviewed-by: Thomas Richter <tmricht@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Eugene Crosser authored
When skb data touches too many pages, skb_linearize() is called opportunistically in the hope that less pages will be required for a big linear buffer than for multiple fragments. This patch intoduces a separate counter in ethtool statistics structure representing _failed_ linearization attempts. Signed-off-by: Eugene Crosser <Eugene.Crosser@ru.ibm.com> Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com> Reviewed-by: Lakhvich Dmitriy <ldmitriy@ru.ibm.com> Reviewed-by: Thomas Richter <tmricht@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Eugene Crosser authored
Set scatter/gather ON by default on OSA, for both layer 2 and layer 3 modes. We always use fragmentation over QDIO anyway, so let the upper layers of the stack take advantage of that. Signed-off-by: Eugene Crosser <Eugene.Crosser@ru.ibm.com> Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com> Reviewed-by: Lakhvich Dmitriy <ldmitriy@ru.ibm.com> Reviewed-by: Thomas Richter <tmricht@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Eugene Crosser authored
The patch enables NETIF_F_SG flag for OSA in layer 2 mode. It also adds performance accounting for fragmented sends, adds a conditional skb_linearize() attempt if the skb had too many fragments for QDIO SBAL, and fills netdevice->gso_* attributes. Signed-off-by: Eugene Crosser <Eugene.Crosser@ru.ibm.com> Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com> Reviewed-by: Lakhvich Dmitriy <ldmitriy@ru.ibm.com> Reviewed-by: Thomas Richter <tmricht@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Eugene Crosser authored
Use QETH_MAX_BUFFER_ELEMENTS(card) instead of constant 16. Also fill gso_max_segs and gso_min_segs. Signed-off-by: Eugene Crosser <Eugene.Crosser@ru.ibm.com> Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Eugene Crosser authored
Make conditions under which TSO is activated more stringent. Make calculation of SBALEs required for the skb more accurate. Signed-off-by: Eugene Crosser <Eugene.Crosser@ru.ibm.com> Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Eugene Crosser authored
Rewrite the functions that calculate the required number of buffer elements needed to represent SKB data, to make them hopefully more comprehensible. Plus a few cleanups. Signed-off-by: Eugene Crosser <Eugene.Crosser@ru.ibm.com> Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Eugene Crosser authored
Having understood the semantics of BRIDGEPORT error code 0x0010, we can introduce a meaningful error message. Signed-off-by: Eugene Crosser <Eugene.Crosser@ru.ibm.com> Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Arnd Bergmann authored
Modern C standards expect the '__inline__' keyword to come before the return type in a declaration, and we get a couple of warnings for this with "make W=1" in the xfrm{4,6}_policy.c files: net/ipv6/xfrm6_policy.c:369:1: error: 'inline' is not at beginning of declaration [-Werror=old-style-declaration] static int inline xfrm6_net_sysctl_init(struct net *net) net/ipv6/xfrm6_policy.c:374:1: error: 'inline' is not at beginning of declaration [-Werror=old-style-declaration] static void inline xfrm6_net_sysctl_exit(struct net *net) net/ipv4/xfrm4_policy.c:339:1: error: 'inline' is not at beginning of declaration [-Werror=old-style-declaration] static int inline xfrm4_net_sysctl_init(struct net *net) net/ipv4/xfrm4_policy.c:344:1: error: 'inline' is not at beginning of declaration [-Werror=old-style-declaration] static void inline xfrm4_net_sysctl_exit(struct net *net) Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Arnd Bergmann authored
Modern C standards expect the '__inline__' keyword to come before the return type in a declaration, and we get a warning for this with "make W=1": drivers/net/ethernet/freescale/gianfar.c:2278:1: error: 'inline' is not at beginning of declaration [-Werror=old-style-declaration] Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Arnd Bergmann authored
Modern C standards expect the '__inline__' keyword to come before the return type in a declaration, and we get many warnings for this with "make W=1" because the eicon driver has this in a header file: eicon/divasmain.c:448:1: error: '__inline__' is not at beginning of declaration [-Werror=old-style-declaration] eicon/divasmain.c:453:1: error: '__inline__' is not at beginning of declaration [-Werror=old-style-declaration] eicon/divasmain.c:458:1: error: '__inline__' is not at beginning of declaration [-Werror=old-style-declaration] eicon/divasmain.c:463:1: error: '__inline__' is not at beginning of declaration [-Werror=old-style-declaration] eicon/divasmain.c:468:1: error: '__inline__' is not at beginning of declaration [-Werror=old-style-declaration] eicon/divasmain.c:473:1: error: '__inline__' is not at beginning of declaration [-Werror=old-style-declaration] eicon/platform.h:274:1: error: '__inline__' is not at beginning of declaration [-Werror=old-style-declaration] eicon/platform.h:280:1: error: '__inline__' is not at beginning of declaration [-Werror=old-style-declaration] A similar warning gets printed for the diva_os_register_io_port() declaration, because 'register' is interpreted as a keyword instead of a variable name: In file included from eicon/diva_didd.c:21:0: eicon/platform.h:206:1: error: 'register' is not at beginning of declaration [-Werror=old-style-declaration] Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Arnd Bergmann authored
Modern C standards expect the '__inline__' keyword to come before the return type in a declaration, and we get a warning for this with "make W=1": drivers/net/hamradio/baycom_par.c:159:1: error: '__inline__' is not at beginning of declaration [-Werror=old-style-declaration] For consistency with other drivers, I'm changing '__inline__' to 'inline' at the same time. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Wei Tang authored
The space is missing after ',', and this will introduce much more noise when checking patch around. Signed-off-by: Wei Tang <tangwei@cmss.chinamobile.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Wei Tang authored
This patch fixes the checkpatch.pl error to dev.c: ERROR: do not initialise statics to 0 Signed-off-by: Wei Tang <tangwei@cmss.chinamobile.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Arnd Bergmann authored
We get a warning for tlan_handle_tx_eoc when building with "make W=1" drivers/net/ethernet/ti/tlan.c: In function 'tlan_handle_tx_eoc': drivers/net/ethernet/ti/tlan.c:1647:59: error: parameter 'host_int' set but not used [-Werror=unused-but-set-parameter] static u32 tlan_handle_tx_eoc(struct net_device *dev, u16 host_int) This is harmless, but removing the unused assignment lets us avoid the warning with no downside. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Arnd Bergmann authored
We get a warning for qlcnic_83xx_get_mac_address when building with "make W=1": drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c: In function 'qlcnic_83xx_get_mac_address': drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c:2156:8: error: parameter 'function' set but not used [-Werror=unused-but-set-parameter] Clearly this is harmless, but there is also no point for setting the variable, so we can simply remove the assignment. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Rajesh Borundia <rajesh.borundia@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Arnd Bergmann authored
The b53 dsa register access confusingly uses __raw register accessors when both the CPU and the device are big-endian, but it uses little- endian accessors when the same device is used from a little-endian CPU, which makes no sense. This uses normal accessors in device-endianess all the time, which will work in all four combinations of register and CPU endianess, and it will have the same barrier semantics in all cases. This also seems to take care of a (false positive) warning I'm getting: drivers/net/dsa/b53/b53_mmap.c: In function 'b53_mmap_read64': drivers/net/dsa/b53/b53_mmap.c:109:10: error: 'hi' may be used uninitialized in this function [-Werror=maybe-uninitialized] *val = ((u64)hi << 32) | lo; I originally planned to submit another patch for that warning and did this one as a preparation cleanup, but it does seem to be sufficient by itself. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Simon Horman authored
This appears to be necessary and sufficient to provide MPLS in GRE (RFC4023) support. This can be used by establishing an ipgre tunnel device and then routing MPLS over it. The following example will forward MPLS frames received with an outermost MPLS label 100 over tun1, a GRE tunnel. The forwarded packet will have the outermost MPLS LSE removed and two new LSEs added with labels 200 (outermost) and 300 (next). ip link add name tun1 type gre remote 10.0.99.193 local 10.0.99.192 ttl 225 ip link set up dev tun1 ip addr add 10.0.98.192/24 dev tun1 ip route sh echo 1 > /proc/sys/net/mpls/conf/eth0/input echo 101 > /proc/sys/net/mpls/platform_labels ip -f mpls route add 100 as 200/300 via inet 10.0.98.193 ip -f mpls route sh Also remove unnecessary braces. Reviewed-by: Dinan Gunawardena <dinan.gunawardena@netronome.com> Signed-off-by: Simon Horman <simon.horman@netronome.com> Acked-by: Robert Shearman <rshearma@brocade.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
hayeswang authored
In set_speed(), BMCR_RESET would be set when the flag of PHY_RESET is set. Use BMCR_RESET to replace testing the flag of PHY_RESET. Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Philippe Reynes authored
There are two generics functions phy_ethtool_{get|set}_link_ksettings, so we can use them instead of defining the same code in the driver. Signed-off-by: Philippe Reynes <tremyfr@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Philippe Reynes authored
The private structure contain a pointer to phydev, but the structure net_device already contain such pointer. So we can remove the pointer phydev in the private structure, and update the driver to use the one contained in struct net_device. Signed-off-by: Philippe Reynes <tremyfr@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 16 Jun, 2016 13 commits
-
-
David S. Miller authored
Vincent Palatin says: ==================== net: stmmac: dwmac-rk: fixes for Wake-on-Lan on RK3288 In order to support Wake-On-Lan when using the RK3288 integrated MAC (with an external RGMII PHY), we need to avoid shutting down the regulator of the external PHY when the MAC is suspended as it's currently done in the MAC platform code. As a first step, create independant callbacks for suspend/resume rather than re-using exit/init callbacks. So the dwmac platform driver can behave differently on suspend where it might skip shutting the PHY and at module unloading. Then update the dwmac-rk driver to switch off the PHY regulator only if we are not planning to wake up from the LAN. Finally add the PMT interrupt to the MAC device tree configuration, so we can wake up the core from it when the PHY has received the magic packet. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Vincent Palatin authored
In order to use Wake-on-Lan on RK3288 integrated MAC, we need to wake-up the CPU on the PMT interrupt when the MAC and the PHY are in low power mode. Adding the interrupt declaration. Signed-off-by: Vincent Palatin <vpalatin@chromium.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Vincent Palatin authored
When suspending the machine, do not shutdown the external PHY by cutting its regulator in the mac platform driver suspend code if Wake-on-Lan is enabled, else it cannot wake us up. In order to do this, split the suspend/resume callbacks from the init/exit callbacks, so we can condition the power-down on the lack of need to wake-up from the LAN but do it unconditionally when unloading the module. Signed-off-by: Vincent Palatin <vpalatin@chromium.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Vincent Palatin authored
Let the stmmac platform drivers provide dedicated suspend and resume callbacks rather than always re-using the init and exits callbacks. If the driver does not provide the suspend or resume callback, we fall back to the old behavior trying to use exit or init. This allows a specific platform to perform only a partial power-down on suspend if Wake-on-Lan is enabled but always perform the full shutdown sequence if the module is unloaded. Signed-off-by: Vincent Palatin <vpalatin@chromium.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Xin Long authored
Commit d46e416c ("sctp: sctp should change socket state when shutdown is received") may set sk_state CLOSING in sctp_sock_migrate, but inet_accept doesn't allow the sk_state other than ESTABLISHED/ CLOSED for sctp. So we will change sk_state to CLOSED, instead of CLOSING, as actually sk is closed already there. Fixes: d46e416c ("sctp: sctp should change socket state when shutdown is received") Reported-by: Ye Xiaolong <xiaolong.ye@intel.com> Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Fabien Siron authored
Signed-off-by: Fabien Siron <fabien.siron@epita.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Daniel Borkmann says: ==================== bpf: improve fd array release This set improves BPF perf fd array map release wrt to purging entries, first two extend the API as needed. Please see individual patches for more details. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Daniel Borkmann authored
The behavior of perf event arrays are quite different from all others as they are tightly coupled to perf event fds, f.e. shown recently by commit e03e7ee3 ("perf/bpf: Convert perf_event_array to use struct file") to make refcounting on perf event more robust. A remaining issue that the current code still has is that since additions to the perf event array take a reference on the struct file via perf_event_get() and are only released via fput() (that cleans up the perf event eventually via perf_event_release_kernel()) when the element is either manually removed from the map from user space or automatically when the last reference on the perf event map is dropped. However, this leads us to dangling struct file's when the map gets pinned after the application owning the perf event descriptor exits, and since the struct file reference will in such case only be manually dropped or via pinned file removal, it leads to the perf event living longer than necessary, consuming needlessly resources for that time. Relations between perf event fds and bpf perf event map fds can be rather complex. F.e. maps can act as demuxers among different perf event fds that can possibly be owned by different threads and based on the index selection from the program, events get dispatched to one of the per-cpu fd endpoints. One perf event fd (or, rather a per-cpu set of them) can also live in multiple perf event maps at the same time, listening for events. Also, another requirement is that perf event fds can get closed from application side after they have been attached to the perf event map, so that on exit perf event map will take care of dropping their references eventually. Likewise, when such maps are pinned, the intended behavior is that a user application does bpf_obj_get(), puts its fds in there and on exit when fd is released, they are dropped from the map again, so the map acts rather as connector endpoint. This also makes perf event maps inherently different from program arrays as described in more detail in commit c9da161c ("bpf: fix clearing on persistent program array maps"). To tackle this, map entries are marked by the map struct file that added the element to the map. And when the last reference to that map struct file is released from user space, then the tracked entries are purged from the map. This is okay, because new map struct files instances resp. frontends to the anon inode are provided via bpf_map_new_fd() that is called when we invoke bpf_obj_get_user() for retrieving a pinned map, but also when an initial instance is created via map_create(). The rest is resolved by the vfs layer automatically for us by keeping reference count on the map's struct file. Any concurrent updates on the map slot are fine as well, it just means that perf_event_fd_array_release() needs to delete less of its own entires. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Daniel Borkmann authored
This patch extends map_fd_get_ptr() callback that is used by fd array maps, so that struct file pointer from the related map can be passed in. It's safe to remove map_update_elem() callback for the two maps since this is only allowed from syscall side, but not from eBPF programs for these two map types. Like in per-cpu map case, bpf_fd_array_map_update_elem() needs to be called directly here due to the extra argument. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Daniel Borkmann authored
Add a release callback for maps that is invoked when the last reference to its struct file is gone and the struct file about to be released by vfs. The handler will be used by fd array maps. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Edward Cree says: ==================== sfc: RX VLAN filtering Adds support for VLAN-qualified receive filters on EF10 hardware. This is needed when running as a guest if the hypervisor has enabled vfs-vlan-restrict, in which case the firmware rejects filters not qualified with VLAN 0. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Andrew Rybchenko authored
If vPort has VLAN_RESTRICT flag, VLAN tagged traffic will not be delivered without corresponding Rx filters which may be proxied to and moderated by hypervisor. Signed-off-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Edward Cree authored
Signed-off-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-