fsnotify_clear_marks_by_group_flags() can race with
fsnotify_destroy_marks() so when fsnotify_destroy_mark_locked() drops
mark_mutex, a mark from the list iterated by
fsnotify_clear_marks_by_group_flags() can be freed and we dereference free
memory in the loop there.

Fix the problem by keeping mark_mutex held in
fsnotify_destroy_mark_locked().  The reason why we drop that mutex is that
we need to call a ->freeing_mark() callback which may acquire mark_mutex
again.  To avoid this and similar lock inversion issues, we move the call
to ->freeing_mark() callback to the kthread destroying the mark.
Signed-off-by: Jan Kara <jack@suse.cz>
Reported-by: Ashish Sangwan <a.sangwan@samsung.com>
Suggested-by: Lino Sanfilippo <LinoSanfilippo@gmx.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

/proc/*/cmdline code checks if it should look at ENVP area by checking
last byte of ARGV area:

	rv = access_remote_vm(mm, arg_end - 1, &c, 1, 0);
	if (rv <= 0)
		goto out_free_page;

If ARGV is somehow made empty (by doing execve(..., NULL, ...) or
manually setting ->arg_start and ->arg_end to equal values), the decision
will be based on byte which doesn't even belong to ARGV/ENVP.

So, quickly check if ARGV area is empty and report 0 to match previous
behaviour.
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

If dma-debug is disabled due to a memory error, DMA unmaps do not affect
the dma_active_cacheline radix tree anymore, and debug_dma_assert_idle()
can print false warnings.

Disable debug_dma_assert_idle() when dma_debug_disabled() is true.
Signed-off-by: Haggai Eran <haggaie@mellanox.com>
Fixes: 0abdd7a8 ("dma-debug: introduce debug_dma_assert_idle()")
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Vinod Koul <vinod.koul@intel.com>
Cc: Russell King <rmk+kernel@arm.linux.org.uk>
Cc: James Bottomley <JBottomley@Parallels.com>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: Sebastian Ott <sebott@linux.vnet.ibm.com>
Cc: Jiri Kosina <jkosina@suse.cz>
Cc: Horia Geanta <horia.geanta@freescale.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

A hexdump with a buf not aligned to the groupsize causes
non-naturally-aligned memory accesses.  This was causing a kernel panic
on the processor BlackFin BF527, when such an unaligned buffer was fed
by the function ubifs_scanned_corruption in fs/ubifs/scan.c .

To fix this, change accesses to the contents of the buffer so they go
through get_unaligned().  This change should be harmless to unaligned-
access-capable architectures, and any performance hit should be anyway
dwarfed by the snprintf() processing time.
Signed-off-by: Horacio Mijail Antón Quiles <hmijail@gmail.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: Joe Perches <joe@perches.com>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Changes in ("checkpatch: categorize some long line length checks")
now erroneously reports long line defects in patch context.

Fix it.
Signed-off-by: Joe Perches <joe@perches.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Commit 2ae416b1 ("mm: new mm hook framework") introduced an empty
header file (mm-arch-hooks.h) for every architecture, even those which
doesn't need to define mm hooks.

As suggested by Geert Uytterhoeven, this could be cleaned through the use
of a generic header file included via each per architecture
asm/include/Kbuild file.

The PowerPC architecture is not impacted here since this architecture has
to defined the arch_remap MM hook.
Signed-off-by: Laurent Dufour <ldufour@linux.vnet.ibm.com>
Suggested-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Vineet Gupta <vgupta@synopsys.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Since the get_maintainer script still reports my old email id based on
few old commits, update mailmap to report new/updated address.  It also
helps to fix email address for 'git shortlog'
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Switch to my kernel.org alias instead of a badly named gmail address,
which I rarely use.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The kbuild test robot reported the following

  tree:   git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git master
  head:   14a6f198
  commit: 3b242c66 x86: mm: enable deferred struct page initialisation on x86-64
  date:   3 days ago
  config: x86_64-randconfig-x006-201527 (attached as .config)
  reproduce:
    git checkout 3b242c66
    # save the attached .config to linux build tree
    make ARCH=x86_64

  All warnings (new ones prefixed by >>):

     mm/page_alloc.c: In function 'early_page_uninitialised':
  >> mm/page_alloc.c:247:6: warning: unused variable 'nid' [-Wunused-variable]
       int nid = early_pfn_to_nid(pfn);

It's due to the NODE_DATA macro ignoring the nid parameter on !NUMA
configurations.  This patch avoids the warning by not declaring nid.
Signed-off-by: Mel Gorman <mgorman@suse.de>
Reported-by: Wu Fengguang <fengguang.wu@intel.com>
Cc: "Kirill A. Shutemov" <kirill@shutemov.name>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Some modules call config_item_init_type_name() and config_group_init_type_name()
with parameter "name" directly controlled by userspace.  These two
functions call config_item_set_name() with this name used as a format
string, which can be used to leak information such as content of the
stack to userspace.

For example, make_netconsole_target() in netconsole module calls
config_item_init_type_name() with the name of a newly-created directory.
This means that the following commands give some unexpected output, with
configfs mounted in /sys/kernel/config/ and on a system with a
configured eth0 ethernet interface:

    # modprobe netconsole
    # mkdir /sys/kernel/config/netconsole/target_%lx
    # echo eth0 > /sys/kernel/config/netconsole/target_%lx/dev_name
    # echo 1 > /sys/kernel/config/netconsole/target_%lx/enabled
    # echo eth0 > /sys/kernel/config/netconsole/target_%lx/dev_name
    # dmesg |tail -n1
    [  142.697668] netconsole: target (target_ffffffffc0ae8080) is
    enabled, disable to update parameters

The directory name is correct but %lx has been interpreted in the
internal item name, displayed here in the error message used by
store_dev_name() in drivers/net/netconsole.c.

To fix this, update every caller of config_item_set_name to use "%s"
when operating on untrusted input.

This issue was found using -Wformat-security gcc flag, once a __printf
attribute has been added to config_item_set_name().
Signed-off-by: Nicolas Iooss <nicolas.iooss_linux@m4x.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Felipe Balbi <balbi@ti.com>
Acked-by: Joel Becker <jlbec@evilplan.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Using __printf attributes helps to detect several format string issues
at compile time (even though -Wformat-security is currently disabled in
Makefile).  For example it can detect when formatting a pointer as a
number, like the issue fixed in commit a3fa71c4 ("wl18xx: show
rx_frames_per_rates as an array as it really is"), or when the arguments
do not match the format string, c.f.  for example commit 5ce1aca8
("reiserfs: fix __RASSERT format string").

To prevent similar bugs in the future, add a __printf attribute to every
function prototype which needs one in include/linux/ and lib/.  These
functions were mostly found by using gcc's -Wsuggest-attribute=format
flag.
Signed-off-by: Nicolas Iooss <nicolas.iooss_linux@m4x.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Felipe Balbi <balbi@ti.com>
Cc: Joel Becker <jlbec@evilplan.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

On s390 we only can enable hugepages if the underlying hardware/hypervisor
also does support this.  Common code now would assume this to be
signaled by setting HPAGE_SHIFT to 0.  But on s390, where we only
support one hugepage size, there is a link between HPAGE_SHIFT and
pageblock_order.

So instead of setting HPAGE_SHIFT to 0, we will implement the check for
the hardware capability.
Signed-off-by: Dominik Dingel <dingel@linux.vnet.ibm.com>
Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Michael Holzheu <holzheu@linux.vnet.ibm.com>
Cc: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

s390 has a constant hugepage size, by setting HPAGE_SHIFT we also change
e.g. the pageblock_order, which should be independent in respect to
hugepage support.

With this patch every architecture is free to define how to check
for hugepage support.
Signed-off-by: Dominik Dingel <dingel@linux.vnet.ibm.com>
Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Michael Holzheu <holzheu@linux.vnet.ibm.com>
Cc: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Heiko noticed that the current check for hugepage support on s390 is a
little bit too harsh as systems which do not support will crash.

The reason is that pageblock_order can now get negative when we set
HPAGE_SHIFT to 0.  To avoid all this and to avoid opening another can of
worms with enabling HUGETLB_PAGE_SIZE_VARIABLE I think it would be best
to simply allow architectures to define their own hugepages_supported().

Revert bea41197 ("s390/mm: make hugepages_supported a boot time
decision") in preparation.
Signed-off-by: Dominik Dingel <dingel@linux.vnet.ibm.com>
Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Michael Holzheu <holzheu@linux.vnet.ibm.com>
Cc: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Heiko noticed that the current check for hugepage support on s390 is a
little bit too harsh as systems which do not support will crash.

The reason is that pageblock_order can now get negative when we set
HPAGE_SHIFT to 0.  To avoid all this and to avoid opening another can of
worms with enabling HUGETLB_PAGE_SIZE_VARIABLE I think it would be best
to simply allow architectures to define their own hugepages_supported().

This patch (of 4): revert commit cf54e2fc ("s390/mm: change
HPAGE_SHIFT type to int") in preparation.
Signed-off-by: Dominik Dingel <dingel@linux.vnet.ibm.com>
Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Michael Holzheu <holzheu@linux.vnet.ibm.com>
Cc: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

openrisc-allnoconfig:

  kernel/uid16.c: In function 'SYSC_setgroups16':
  kernel/uid16.c:184:2: error: implicit declaration of function 'groups_alloc'
  kernel/uid16.c:184:13: warning: assignment makes pointer from integer without a cast

openrisc shouldn't be setting CONFIG_UID16 when CONFIG_MULTIUSER=n.

Fixes: 2813893f ("kernel: conditionally support non-root users, groups and capabilities")
Reported-by: Fengguang Wu <fengguang.wu@gmail.com>
Cc: Iulia Manda <iulia.manda21@gmail.com>
Cc: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

I am moving from mhocko@suse.cz to mhocko@kernel.org for kernel related
stuff.
Signed-off-by: Michal Hocko <mhocko@suse.cz>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The purpose of the option was documented in
Documentation/filesystems/proc.txt but the help text was missing.

Add small help text that also points to the documentation.
Signed-off-by: Iago López Galeiras <iago@endocode.com>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Since suse.{de,cz} is deprecated to use (but will still work for some
time), switch to suse.com which is now to be used instead.
Signed-off-by: Jiri Slaby <jslaby@suse.com>
Acked-by: Alexander Graf <agraf@suse.de>
Acked-by: David Sterba <dsterba@suse.com>
Acked-by: Hannes Reinecke <hare@suse.com>
Acked-by: Jan Kara <jack@suse.com>
Acked-by: Jean Delvare <jdelvare@suse.com>
Acked-by: Jiri Kosina <jkosina@suse.com>
Acked-by: Michal Marek <mmarek@suse.com>
Acked-by: NeilBrown <neilb@suse.com>
Acked-by: Oliver Neukum <oneukum@suse.de>
Acked-by: Takashi Iwai <tiwai@suse.com>
Acked-by: Thomas Renninger <trenn@suse.de>
Acked-by: Tomas Cech <sleep_walker@suse.com>
Acked-by: Vojtech Pavlik <vojtech@suse.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull staging and IIO driver fixes from Greg KH:
 "Here's some staging and IIO driver fixes for 4.2-rc3.

  Nothing major, the majority are IIO issues that were reported, with a
  few other minor staging driver fixes.  All have been in linux-next for
  a while with no reported issues"

* tag 'staging-4.2-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (25 commits)
  staging: vt6656: check ieee80211_bss_conf bssid not NULL
  staging: vt6655: check ieee80211_bss_conf bssid not NULL
  staging:lustre: remove irq.h from socklnd.h
  staging: make board support depend on OF_IRQ and CLKDEV_LOOKUP
  iio: tmp006: Check channel info on write
  iio: sx9500: Add missing init in sx9500_buffer_pre{en,dis}able()
  iio:light:ltr501: fix regmap dependency
  iio:light:ltr501: fix variable in ltr501_init
  iio: sx9500: fix bug in compensation code
  iio: sx9500: rework error handling of raw readings
  iio: magnetometer: mmc35240: fix available sampling frequencies
  iio:light:stk3310: Fix REGMAP_I2C dependency
  iio: light: STK3310: un-invert proximity values
  iio:adc:cc10001_adc: fix Kconfig dependency
  iio: light: tcs3414: Fix bug preventing to set integration time
  iio:accel:bmc150-accel: fix counting direction
  iio:light:cm3323: clear bitmask before set
  iio: adc: at91_adc: allow to use full range of startup time
  iio: DAC: ad5624r_spi: fix bit shift of output data value
  iio: proximity: sx9500: Fix proximity value
  ...

Pull USB driver fixes from Greg KH:
 "Here's some USB driver fixes for 4.2-rc3.

  The ususal number of gadget driver fixes are in here, along with some
  new device ids and a build fix for the mn10300 arch which required
  some symbols to be renamed in the mos7720 driver.

  All have been in linux-next for a while with no reported issues"

* tag 'usb-4.2-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
  USB: serial: Destroy serial_minors IDR on module exit
  usb: gadget: f_midi: fix error recovery path
  usb: phy: mxs: suspend to RAM causes NULL pointer dereference
  usb: gadget: udc: fix free_irq() after request_irq() failed
  usb: gadget: composite: Fix NULL pointer dereference
  usb: gadget: f_fs: do not set cancel function on synchronous {read,write}
  usb: f_mass_storage: limit number of reported LUNs
  usb: dwc3: core: avoid NULL pointer dereference
  usb: dwc2: embed storage for reg backup in struct dwc2_hsotg
  usb: dwc2: host: allocate qtd before atomic enqueue
  usb: dwc2: host: allocate qh before atomic enqueue
  usb: musb: host: rely on port_mode to call musb_start()
  USB: cp210x: add ID for Aruba Networks controllers
  USB: mos7720: rename registers
  USB: option: add 2020:4000 ID

Pull sound fixes from Takashi Iwai:
 "There are two small fixes for HD-audio and USB LINE6, and the rest are
  a few new quirks and device ID addition that are good enough to get
  into 4.2"

* tag 'sound-4.2-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  ALSA: hda/realtek: Enable HP amp and mute LED on HP Folio 9480m [v3]
  ALSA: line6: Fix -EBUSY error during active monitoring
  ALSA: hda - Fix a wrong busy check in alt PCM open
  ALSA: hda - add codec ID for Broxton display audio codec
  ALSA: usb-audio: Add MIDI support for Steinberg MI2/MI4

Pull GPIO fixes from Linus Walleij:
 "This is a first set of GPIO fixes for the v4.2 series, all hitting
  individual drivers and nothing else (except for a documentation
  oneliner.  I intended to send a request earlier but life intervened)"

* tag 'gpio-v4.2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio:
  gpio: pca953x: fix nested irqs rescheduling
  gpio: omap: prevent module from being unloaded while in use
  gpio: max732x: Add missing dev reference to gpiochip
  gpio/xilinx: Use correct address when setting initial values.
  gpio: zynq: Fix problem with unbalanced pm_runtime_enable
  gpio: omap: add missed spin_unlock_irqrestore in omap_gpio_irq_type
  gpio: brcmstb: fix null ptr dereference in driver remove
  gpio: Remove double "base" in comment

Pull drm fixes from Dave Airlie:
 "Fixes all over the place.

  The rockchip and imx fixes I missed while on holidays, so I've queued
  them now which makes this a bit bigger.

  The rest is misc amdgpu, radeon, i915 and armada.

  I think the most important thing is the ioctl fix, we dropped the
  avoid compat ball, so we get to add a compat wrapper.

  There is also an i915 revert to avoid a regression with existing
  userspace"

* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: (43 commits)
  drm/ttm: improve uncached page deallocation.
  drm/ttm: fix uncached page deallocation to properly fill page pool v3.
  drm/amdgpu/dce8: Re-set VBLANK interrupt state when enabling a CRTC
  drm/radeon/ci: silence a harmless PCC warning
  drm/amdgpu/cz: silence some dpm debug output
  drm/amdgpu/cz: store the forced dpm level
  drm/amdgpu/cz: unforce dpm levels before forcing to low/high
  drm/amdgpu: remove bogus check in gfx8 rb setup
  drm/amdgpu: set proper index/data pair for smc regs on CZ (v2)
  drm/amdgpu: disable the IP module if early_init returns -ENOENT (v2)
  drm/amdgpu: stop context leak in the error path
  drm/amdgpu: validate the context id in the dependencies
  drm/radeon: fix user ptr race condition
  drm/radeon: Don't flush the GART TLB if rdev->gart.ptr == NULL
  drm/radeon: add a dpm quirk for Sapphire Radeon R9 270X 2GB GDDR5
  drm/armada: avoid saving the adjusted mode to crtc->mode
  drm/armada: fix overlay when partially off-screen
  drm/armada: convert overlay to use drm_plane_helper_check_update()
  drm/armada: fix gem object free after failed prime import
  drm/armada: fix incorrect overlay plane cleanup
  ...

Calls to set_memory_wb() incure heavy TLB flush and IPI cost. To
minimize those wait until pool grow beyond batch size before
draining the pool.
Signed-off-by: Jérôme Glisse <jglisse@redhat.com>
Reviewed-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Reviewed-and-Tested-by: Michel Dänzer <michel@daenzer.net>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

Current code never allowed the page pool to actualy fill in anyway.
This fix it, so that we only start freeing page from the pool when
we go over the pool size.

Changed since v1:
  - Move the page batching optimization to its separate patch.

Changed since v2:
  - Do not remove code part of the batching optimization with
    this patch.
  - Better commit message.
Signed-off-by: Jérôme Glisse <jglisse@redhat.com>
Reviewed-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Reviewed-and-Tested-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

Pull power management and ACPI fixes from Rafael Wysocki:
 "These fix two bugs in the cpufreq core (including one recent
  regression), fix a 4.0 PCI regression related to the ACPI resources
  management and quieten an RCU-related lockdep complaint about a
  tracepoint in the suspend-to-idle code.

  Specifics:

   - Fix a recently introduced issue in the cpufreq policy object
     reinitialization that leads to CPU offline/online breakage (Viresh
     Kumar)

   - Make it possible to access frequency tables of offline CPUs which
     is needed by thermal management code among other things (Viresh
     Kumar)

   - Fix an ACPI resource management regression introduced during the
     4.0 cycle that may cause incorrect resource validation results to
     appear in 32-bit x86 kernels due to silent truncation of 64-bit
     values to 32-bit (Jiang Liu)

   - Fix up an RCU-related lockdep complaint about suspicious RCU usage
     in idle caused by using a suspend tracepoint in the core suspend-
     to-idle code (Rafael J Wysocki)"

* tag 'pm+acpi-4.2-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  ACPI / PCI: Fix regressions caused by resource_size_t overflow with 32-bit kernel
  cpufreq: Allow freq_table to be obtained for offline CPUs
  cpufreq: Initialize the governor again while restoring policy
  suspend-to-idle: Prevent RCU from complaining about tick_freeze()

Merge tag 'platform-drivers-x86-v4.2-3' of git://git.infradead.org/users/dvhart/linux-platform-drivers-x86

Pull x86 platform driver fixes from Darren Hart:
 "Fix SMBIOS call handling and hwswitch state coherency in the
  dell-laptop driver.  Cleanups for intel_*_ipc drivers.  Details:

  dell-laptop:
   - Do not cache hwswitch state
   - Check return value of each SMBIOS call
   - Clear buffer before each SMBIOS call

  intel_scu_ipc:
   - Move local memory initialization out of a mutex

  intel_pmc_ipc:
   - Update kerneldoc formatting
   - Fix compiler casting warnings"

* tag 'platform-drivers-x86-v4.2-3' of git://git.infradead.org/users/dvhart/linux-platform-drivers-x86:
  intel_scu_ipc: move local memory initialization out of a mutex
  intel_pmc_ipc: Update kerneldoc formatting
  dell-laptop: Do not cache hwswitch state
  dell-laptop: Check return value of each SMBIOS call
  dell-laptop: Clear buffer before each SMBIOS call
  intel_pmc_ipc: Fix compiler casting warnings

Pull m68knommu/coldfire fixes from Greg Ungerer:
 "Contains build fixes and updates for the ColdFire defconfigs.

  Specifically there is a couple of fixes that address problems building
  allnoconfig.  Also fix for enabling PCI bus on the M54xx family of
  ColdFire"

* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu:
  m68k: enable PCI support for m5475evb defconfig
  m68k: fix io functions for ColdFire/MMU/PCI case
  m68knommu: update defconfig for ColdFire m5475evb
  m68knommu: update defconfig for ColdFire m5407c3
  m68knommu: update defconfig for ColdFire m5307c3
  m68knommu: update defconfig for ColdFire m5275evb
  m68knommu: update defconfig for ColdFire m5272c3
  m68knommu: update defconfig for ColdFire m5249evb
  m68knommu: update defconfig for m5208evb
  m68knommu: make ColdFire SoC selection a choice
  m68knommu: improve the clock configuration defaults
  m68knommu: force setting of CONFIG_CLOCK_FREQ for ColdFire

Merge branch 'drm-rockchip-2015-07-13' of https://github.com/markyzq/kernel-drm-rockchip into drm-fixes

misc rockchip fixes.

* 'drm-rockchip-2015-07-13' of https://github.com/markyzq/kernel-drm-rockchip:
  drm/rockchip: vop: remove hardware cursor window
  drm/rockchip: vop: switch cursor plane to window 3
  drm/rockchip: Drop owner assignment from platform_driver
  drm/rockchip: use drm_gem_mmap helpers
  drm/rockchip: only call drm_fb_helper_hotplug_event if fb_helper present
  drm/rockchip: Add BGR formats to VOP

imx-drm: fixes for parallel-display, imx-tve, and ipu-common

These patches fix the parallel-display driver to use the standard OF
graph bindings for connecting a drm_panel via device tree instead of
an undocumented, driver specific device tree property, take care to
disable all IPU interrupts before setting up the irq chip to fix a
kexec lockup, and fix VGA output on i.MX53-QSB boards by correcting
the media bus format set by the imx-tve driver.

* tag 'imx-drm-fixes-2015-07-14' of git://git.pengutronix.de/git/pza/linux:
  drm/imx: tve: fix media bus format for VGA output
  GPU: ipu: fix lockup caused by pending chained interrupts
  drm/imx: parallel-display: fix drm_panel support

A range of fixes for the Armada DRM driver:
- A missing wakeup could result in overlay frames being delayed, causing
  video playback to hiccup.
- Avoid unmapping a dma-buf attachment which was never mapped
- Fix the overlay when partially off the screen by switching to the
  drm_plane_helper_check_update() helper and using the calculated
  coordinates to set the start address.
- Remove an incorrect assignment to crtc->mode - which should be the
  unadjusted mode.
- Fix a missing call to drm_plane_cleanup() in the overlay code.

* 'drm-armada-fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-arm:
  drm/armada: avoid saving the adjusted mode to crtc->mode
  drm/armada: fix overlay when partially off-screen
  drm/armada: convert overlay to use drm_plane_helper_check_update()
  drm/armada: fix gem object free after failed prime import
  drm/armada: fix incorrect overlay plane cleanup
  drm/armada: fix missing overlay wake-up

Next batch of i915 fixes. Note that the compat32 patch here needs the drm
core one to be actually useful, I'll send you that one with a separate
drm-fixes pull request. One revert because a fix in -rc2 did break
existing userspace.

* tag 'drm-intel-fixes-2015-07-15' of git://anongit.freedesktop.org/drm-intel:
  drm/i915: Do not call intel_crtc_disable if the crtc is already disabled.
  Revert "drm/i915: Declare the swizzling unknown for L-shaped configurations"
  drm/i915: Forward all core DRM ioctls to core compat handling
  drm/i915: fix oops in primary_check_plane
  drm/i915: remove unused has_dma_mapping flag
  drm/i915: Fix missing return warning for !CONFIG_DEBUGFS
  drm/i915: avoid leaking DMA mappings
  drm/i915: Snapshot seqno of most recently submitted request.
  drm/i915: Store device pointer in contexts for late tracepoint usafe

Ok next attempt at drm-fixes pull. Big thing really is just the compat32
one for addfb2.1.

* tag 'topic/drm-fixes-2015-07-16' of git://anongit.freedesktop.org/drm-intel:
  drm: Provide compat ioctl for addfb2.1
  Documentation: drm: Fix tablulation in KMS properties table
  drm: add a check for x/y in drm_mode_setcrtc
  drm/rockchip: use drm_gem_mmap helpers

More radeon and amdgpu fixes for 4.2.  Mostly amdgpu bug fixes.

* 'drm-fixes-4.2' of git://people.freedesktop.org/~agd5f/linux:
  drm/amdgpu/dce8: Re-set VBLANK interrupt state when enabling a CRTC
  drm/radeon/ci: silence a harmless PCC warning
  drm/amdgpu/cz: silence some dpm debug output
  drm/amdgpu/cz: store the forced dpm level
  drm/amdgpu/cz: unforce dpm levels before forcing to low/high
  drm/amdgpu: remove bogus check in gfx8 rb setup
  drm/amdgpu: set proper index/data pair for smc regs on CZ (v2)
  drm/amdgpu: disable the IP module if early_init returns -ENOENT (v2)
  drm/amdgpu: stop context leak in the error path
  drm/amdgpu: validate the context id in the dependencies
  drm/radeon: fix user ptr race condition
  drm/radeon: Don't flush the GART TLB if rdev->gart.ptr == NULL
  drm/radeon: add a dpm quirk for Sapphire Radeon R9 270X 2GB GDDR5

Pull block fixes from Jens Axboe:
 "A collection of fixes from the last few weeks that should go into the
  current series.  This contains:

   - Various fixes for the per-blkcg policy data, fixing regressions
     since 4.1.  From Arianna and Tejun

   - Code cleanup for bcache closure macros from me.  Really just
     flushing this out, it's been sitting in another branch for months

   - FIELD_SIZEOF cleanup from Maninder Singh

   - bio integrity oops fix from Mike

   - Timeout regression fix for blk-mq from Ming Lei"

* 'for-linus' of git://git.kernel.dk/linux-block:
  blk-mq: set default timeout as 30 seconds
  NVMe: Reread partitions on metadata formats
  bcache: don't embed 'return' statements in closure macros
  blkcg: fix blkcg_policy_data allocation bug
  blkcg: implement all_blkcgs list
  blkcg: blkcg_css_alloc() should grab blkcg_pol_mutex while iterating blkcg_policy[]
  blkcg: allow blkcg_pol_mutex to be grabbed from cgroup [file] methods
  block/blk-cgroup.c: free per-blkcg data when freeing the blkcg
  block: use FIELD_SIZEOF to calculate size of a field
  bio integrity: do not assume bio_integrity_pool exists if bioset exists

Pull jfs fixes from David Kleikamp:
 "A couple trivial fixes and an error path fix"

* tag 'jfs-4.2' of git://github.com/kleikamp/linux-shaggy:
  jfs: clean up jfs_rename and fix out of order unlock
  jfs: fix indentation on if statement
  jfs: removed a prohibited space after opening parenthesis

* pm-cpuidle:
  suspend-to-idle: Prevent RCU from complaining about tick_freeze()

* pm-cpufreq:
  cpufreq: Allow freq_table to be obtained for offline CPUs
  cpufreq: Initialize the governor again while restoring policy

* acpi-resources:
  ACPI / PCI: Fix regressions caused by resource_size_t overflow with 32-bit kernel

Something (ATOM BIOS?) seems to be clobbering the LB_INTERRUPT_MASK
register while the CRTC is off, which caused e.g. glxgears or
gnome-shell to hang after a modeset.
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Jammy Zhou <Jammy.Zhou@amd.com>