- 30 Sep, 2015 3 commits
-
-
Alexander Aring authored
This patch adds support for accessing mac802154 llsec implementation over nl802154. I added for a new Kconfig entry to provide this functionality CONFIG_IEEE802154_NL802154_EXPERIMENTAL. This interface is still in development. It provides to change security parameters and add/del/dump entries of security tables. Later we can add also a get to get an entry by unique identifier. Cc: Phoebe Buckheister <phoebe.buckheister@itwm.fraunhofer.de> Signed-off-by:
Alexander Aring <alex.aring@gmail.com> Signed-off-by:
Marcel Holtmann <marcel@holtmann.org>
-
Alexander Aring authored
This patch uses the nla_get_le64 function instead of doing a force converting to le64. Signed-off-by:
-
Alexander Aring authored
This patch adds missing inline wrappers for nla_get_le32 and nla_get_le64. The 802.15.4 MAC byteorder is little endian and we keep the byteorder for fields like address configuration in the same byteorder as it comes from the MAC layer. To provide these fields for nl802154 userspace applications, we need these inline wrappers for netlink. Cc: David S. Miller <davem@davemloft.net> Signed-off-by:
-
- 29 Sep, 2015 1 commit
-
-
Loic Poulain authored
Send a HCI command and wait for command complete event. This function serializes the requests by grabbing the req_lock. Signed-off-by:
Loic Poulain <loic.poulain@intel.com> Signed-off-by:
-
- 28 Sep, 2015 1 commit
-
-
Prasanna Karthik authored
'retransmit' being set in HCI_IBS_TX_WAKING case, using bool would be efficient. Initialize local bool to false. Signed-off-by:
Prasanna Karthik <mkarthi3@visteon.com> Signed-off-by:
-
- 25 Sep, 2015 4 commits
-
-
Prasanna Karthik authored
NOT NULL comparison modified to be readable, reported by checkpatch. Signed-off-by:
-
Prasanna Karthik authored
NOT NULL comparison modified to be readable, reported by checkpatch. Signed-off-by:
-
Prasanna Karthik authored
NOT NULL comparison modified to be readable, reported by checkpatch. Signed-off-by:
-
Prasanna Karthik authored
replaced 'not null' comparison that is readable, reported by checkpatch. Signed-off-by:
-
- 24 Sep, 2015 8 commits
-
-
Alexander Aring authored
The callback "create" and "parse" from header_ops are called from netdev core upper-layer functionality, like af_packet. These callbacks assumes big endian for addresses and we should not introduce a special byteordering handling for ieee802154 over af_packet in userspace. We have an identical issue with setting the mac address which also assumes big endian byteordering. Signed-off-by:
-
Alexander Aring authored
This patch removes some unnecessary includes from ieee802154 header, which was introduced by commit b609fb54adfa ("ieee802154: add helpers for frame control checks"). Signed-off-by: -
Alexander Aring authored
This patch removes a trailing semicolon which was introduced by commit d3f1bc3 ("mrf24j40: add cca mode support") and reported by kbuild test robot. Signed-off-by: -
Frederic Danis authored
Adds autosuspend runtime functionality to BCM UART driver. Autosuspend is enabled at end of bcm_setup. bcm_device_lock is used for system sleep functions as they can be called at any time. bcm_device_lock is not held for runtime suspend functions as this is only enabled as long as platform device is opened. Signed-off-by:
Frederic Danis <frederic.danis@linux.intel.com> Signed-off-by:
-
Frederic Danis authored
rx_lock spinlock is only used in hci_uart_tty_receive() which is the receive_buf ldisc callback. hci_uart_tty_receive() is protected from re-entrance by its only caller (flush_to_ldisc() in drivers/tty/tty_buffer.c) which held a mutex (buf->lock) for this section. This lock allows "safe use of the line discipline's receive_buf() method by excluding the buffer work and any pending flush from using the flip buffer." (comments from tty_buffer_lock_exclusive() in drivers/tty/tty_buffer.c) So, no need to double protect this resource with rx_lock. Signed-off-by:
-
Frederic Danis authored
Change some CONFIG_PM_SLEEP to CONFIG_PM as hu and is_suspended parameters will be used during PM runtime callbacks. Add bcm_suspend_device() and bcm_resume_device() which performs link management for PM callbacks. These functions will be used for runtime management. Signed-off-by:
-
Frederic Danis authored
ACPI table for BCM2E39 of T100TA is not correct. Set correct irq_polarity for this device. Signed-off-by:
-
Frederic Danis authored
Add warning logging macros to bluetooth subsystem logs. Signed-off-by:
-
- 22 Sep, 2015 23 commits
-
-
Amitkumar Karwar authored
This patch adds support for Marvell's new chipset SD8997. Register offsets and supported feature flags are updated. Signed-off-by:
Zhaoyang Liu <liuzy@marvell.com> Signed-off-by:
Cathy Luo <cluo@marvell.com> Signed-off-by:
Amitkumar Karwar <akarwar@marvell.com> Signed-off-by:
-
Amitkumar Karwar authored
Coding style fix, extra spaces are removed to make casting consistent. Signed-off-by:
-
Alexander Aring authored
This patch replaces some magic numbers with defines for register bits, mask and shifts. Signed-off-by:
-
Alexander Aring authored
This patch changes the irq trigger type value while calling devm_request_irq by using IRQF_TRIGGER_LOW when no irq type was given. Additional we add support for change the irq polarity while hw init if high level or low level triggered irq type are given. For rising edge triggered irq's the mrf24j40 can't deal with that, this races at position of tx completion irq, while the irq is disabled we readout the irq status registers. This will resets the irq line so other irq's can occur. Wile readout the irq status register the irq is still disabled and edge triggered interrupts will be ignored. Signed-off-by:
-
Alexander Aring authored
This patch adds support for promiscuous mode by setting promiscuous (no frame filtering), disable automatic ack handling and not filtering frames where the crc is invalid. Reviewed-by:
Stefan Schmidt <stefan@osg.samsung.com> Signed-off-by:
-
Alexander Aring authored
This patch supports setting of transmit power for the mrf24j40ma transceiver only. The mrf24j40mc has some amplifier to change the transmit power, I am currently not sure how the mapping for this amplifier looks like. Signed-off-by:
-
Alexander Aring authored
This patch supports handling to set the cca energy detection level for the mrf24j40 transceiver. Reviewed-by:
-
Alexander Aring authored
This patch supports cca mode handling for mrf24j40. Reviewed-by:
-
Alexander Aring authored
This patch adds supports to change the CSMA parameters. The datasheet doesn't say anything about max_be value. Seems not configurable and we assume the 802.15.4 default. But this value must exists because there is a min_be value. Signed-off-by:
-
Alexander Aring authored
This patch removes the threaded irq handling and do a hardirq instead. We need to switch to spi_async for this step for getting the irq status register. Reviewed-by:
-
Alexander Aring authored
This patch prepares that we can do the receive handling inside interrupt context by using spi_async. This is necessary for introduce a non-threaded irq handling. Also we drop the bit setting for "RXDECINV" at register "BBREG1", we do a driectly full write of register "BBREG1", because it contains the bit RXDECINV only. Reviewed-by:
-
Alexander Aring authored
This patch reworks the current transmit API to spi_async handling. We removed the error handling check, because mac802154 has no chance to report it. Also the transmit timeout handling can't be handled by xmit async handling, for this usecase we need to implement the netdev watchdog. These are all unlikely cases which we drop now and should be provided by netdev watchdog. We also drop the bit setting for TXNACKREQ at register TXNCON, this is not necessary. The TXNCON register should set only once for each frame, previous settings doesn't matter. Reviewed-by:
-
Alexander Aring authored
This patch introduce two static inline functions. The first to get the frame control field from an sk_buff. The second is for checking on the acknowledgment request bit on the frame control field. Later we can introduce more functions to check on the frame control fields. These will deprecate the current behaviour which requires a host-byteorder conversion and manually bit handling. Reviewed-by:
-
Alexander Aring authored
This patch changes the frame delivery to mac802154 with crc. This is useful for monitor interface types which deliver the crc to userspace. Reviewed-by:
-
Alexander Aring authored
This patch uses the regmap functions for transceiver register settings where it's possible. This means everything except the hotpaths like receive/transmit handling. Reviewed-by:
-
Alexander Aring authored
This patch introduce regmap support for short and long address space of mrf24j40. It's only possible to use regmap_read/write/update_bits for long address range. This is because I added lowlevel bus operation because the write operation need to set the 12th bit to mark a register write, but regmap only supports to set bits for register write access in the first byte. We use other regmap register functions than read/write/update_bits, so this should be fine. Reviewed-by:
-
Alexander Aring authored
For supporting regmap, this patch will add more register defines to prepare a full register dump by regmap debugfs. Reviewed-by:
-
Alexander Aring authored
The mrf24j40 has no source to get a permanent extended address. This patch will add a random generated permanent extended address source. Reviewed-by:
-
Alexander Aring authored
Per default mrf24j40 has the channel 11 after reset. This patch adds the right phy default value for the channel setting. Reviewed-by:
-
Alexander Aring authored
This patch adds devicetree support to mrf24j40 with proper devicetree compatible strings. Reviewed-by:
-
Alexander Aring authored
This patch removes spi settings while mrf24j40 probing. These settings cannot be overwrite while device probing where spi controller should be already configured. These settings need to be setup by device tree or platform data. Reviewed-by:
-
Alexander Aring authored
The function ieee802154_register_hw should always called at last. Currently we do hardware init and such things after register hardware into the subsystem. It could be that the subsystem already call driver operations while running hardware init. Reviewed-by:
-
Alexander Aring authored
This patch removes the own private dataroom allocation by calling devm_kzalloc for devrec and assign this pointer to "devrec->hw->priv". Instead we using like all other drivers ieee802154_alloc_hw and give the size for the private driver dataroom at the first argument. Reviewed-by:
-
