- 27 Sep, 2021 6 commits
-
-
Yassine Oudjana authored
The versioning scheme was changed in an earlier patch, which caused the version being used to initialize WCD9335 to be interpreted as if it was WCD937X, which changed code paths causing broken headphones output. Pass WCD9335 instead of WCD9335_VERSION_2_0 to wcd_clsh_ctrl_alloc to fix it. Fixes: 19c5d1f6 ("ASoC: codecs: wcd-clsh: add new version support") Signed-off-by:
Yassine Oudjana <y.oudjana@protonmail.com> Reviewed-by:
Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20210925022339.786296-1-y.oudjana@protonmail.comSigned-off-by:
Mark Brown <broonie@kernel.org>
-
Mark Brown authored
As part of moving to remove the old style defines for the bus clocks update the alc5632 driver to use more modern terminology for clocking. Signed-off-by:
-
Mark Brown authored
As part of moving to remove the old style defines for the bus clocks update the ak4104 driver to use more modern terminology for clocking. Signed-off-by:
-
Mark Brown authored
As part of moving to remove the old style defines for the bus clocks update the ak4118 driver to use more modern terminology for clocking. Signed-off-by:
-
Mark Brown authored
As part of moving to remove the old style defines for the bus clocks update the zl38060 driver to use more modern terminology for clocking. Signed-off-by:
-
Masanari Iida authored
This patch fixes two spelling typos in qcom,q6afe.txt and qcom,q6asm.txt Signed-off-by:
Masanari Iida <standby24x7@gmail.com> Link: https://lore.kernel.org/r/20210924070044.569541-1-standby24x7@gmail.comSigned-off-by:
-
- 22 Sep, 2021 17 commits
-
-
Mark Brown authored
As part of moving to remove the old style defines for the bus clocks update the pl1022_rdk driver to use more modern terminology for clocking. Signed-off-by:
Fabio Estevam <festevam@gmail.com> Link: https://lore.kernel.org/r/20210921213542.31688-16-broonie@kernel.orgSigned-off-by:
-
Mark Brown authored
As part of moving to remove the old style defines for the bus clocks update the pl1022_ds driver to use more modern terminology for clocking. Signed-off-by:
-
Mark Brown authored
As part of moving to remove the old style defines for the bus clocks update the mpc8610_hpcd driver to use more modern terminology for clocking. Signed-off-by:
-
Mark Brown authored
As part of moving to remove the old style defines for the bus clocks update the imx-sgtl5000 driver to use more modern terminology for clocking. Signed-off-by:
-
Mark Brown authored
As part of moving to remove the old style defines for the bus clocks update the imx-rpmsg driver to use more modern terminology for clocking. Signed-off-by:
-
Mark Brown authored
As part of moving to remove the old style defines for the bus clocks update the imx-hdmi driver to use more modern terminology for clocking. Signed-off-by:
-
Mark Brown authored
As part of moving to remove the old style defines for the bus clocks update the imx-es8328 driver to use more modern terminology for clocking. Signed-off-by:
-
Mark Brown authored
As part of moving to remove the old style defines for the bus clocks update the imx-card driver to use more modern terminology for clocking. Signed-off-by:
-
Mark Brown authored
As part of moving to remove the old style defines for the bus clocks update the imx-audmix driver to use more modern terminology for clocking. Signed-off-by:
-
Mark Brown authored
As part of moving to remove the old style defines for the bus clocks update the fsl_ssi driver to use more modern terminology for clocking. Signed-off-by:
-
Mark Brown authored
As part of moving to remove the old style defines for the bus clocks update the fsl_sai driver to use more modern terminology for clocking. Signed-off-by:
-
Mark Brown authored
As part of moving to remove the old style defines for the bus clocks update the fsl-mqs driver to use more modern terminology for clocking. Signed-off-by:
-
Mark Brown authored
As part of moving to remove the old style defines for the bus clocks update the fsl-esai driver to use more modern terminology for clocking. Signed-off-by:
-
Mark Brown authored
As part of moving to remove the old style defines for the bus clocks update the fsl-audmix driver to use more modern terminology for clocking. Signed-off-by:
-
Mark Brown authored
As part of moving to remove the old style defines for the bus clocks update the fsl-asoc-card driver to use more modern terminology for clocking. Signed-off-by:
-
Mark Brown authored
As part of moving to remove the old style defines for the bus clocks update the eureka-tlv320 driver to use more modern terminology for clocking. Signed-off-by:
-
Mark Brown authored
As part of moving to remove the old style defines for the bus clocks update the cros_ec_codec driver to use more modern terminology for clocking. Signed-off-by:
Enric Balletbo i Serra <enric.balletbo@collabora.com> Link: https://lore.kernel.org/r/20210920170414.17903-1-broonie@kernel.orgSigned-off-by:
-
- 21 Sep, 2021 4 commits
-
-
Sameer Pujar authored
commit 82d3ec1d ("ASoC: Use schema reference for sound-name-prefix") added name-prefix.yaml schema and the same reference was used in couple of other schemas. But this is causing following warning and the same is fixed in current patch. Documentation/devicetree/bindings/sound/nxp,tfa989x.example.dt.yaml: audio-codec@34: 'sound-name-prefix' does not match any of the regexes: 'pinctrl-[0-9]+' From schema: Documentation/devicetree/bindings/sound/nxp,tfa989x.yaml Documentation/devicetree/bindings/sound/nxp,tfa989x.example.dt.yaml: audio-codec@36: 'sound-name-prefix' does not match any of the regexes: 'pinctrl-[0-9]+' From schema: Documentation/devicetree/bindings/sound/nxp,tfa989x.yaml Fixes: 82d3ec1d ("ASoC: Use schema reference for sound-name-prefix") Reported-by:
Rob Herring <robh+dt@kernel.org> Suggested-by:
Sameer Pujar <spujar@nvidia.com> Link: https://lore.kernel.org/r/1632238860-16947-1-git-send-email-spujar@nvidia.comSigned-off-by:
-
Colin Ian King authored
There is a spelling mistake in the module description. Fix it. Signed-off-by:
Colin Ian King <colin.king@canonical.com> Reviewed-by:
-
Shengjiu Wang authored
On i.MX8ULP the spdif works with EDMA, so add compatible string and soc specific data for i.MX8ULP. Signed-off-by:
Shengjiu Wang <shengjiu.wang@nxp.com> Link: https://lore.kernel.org/r/1631238562-27081-1-git-send-email-shengjiu.wang@nxp.comSigned-off-by:
-
Rikard Falkeborn authored
These are only assigned to the ops field in the snd_soc_dai_link struct which is a pointer to const struct snd_soc_ops. Make them const to allow the compiler to put them in read-only memory. Signed-off-by:
Rikard Falkeborn <rikard.falkeborn@gmail.com> Link: https://lore.kernel.org/r/20210920193947.10237-1-rikard.falkeborn@gmail.comSigned-off-by:
-
- 20 Sep, 2021 13 commits
-
-
Mark Brown authored
Revert 6e8cc4dd ("spi: tegra20-slink: Declare runtime suspend and resume functions conditionally") which was mistakenly applied to the ASoC tree not the SPI tree (where it was also applied. Signed-off-by:
-
Mark Brown authored
Merge series "ASoC: compress: Support module_get on stream open" from Peter Ujfalusi <peter.ujfalusi@linux.intel.com>: Hi, SOF is marking all componet drivers with module_get_upon_open = 1 which works fine with normal PCM streams, however on compressed side the module get upon open is not supported. The module_get works when module_get_upon_open is not set becasue the snd_soc_component_module_get_when_probe() will pass NULL for the substream parameter of snd_soc_component_module_get(). In order to re-use the existing infrastructure for module_get, the proposal is to convert the mark_module to void pointer (like the pm mark) and implement matching code for the compressed open/free to pcm open/close. Regards, Peter --- Peter Ujfalusi (2): ASoC: soc-component: Convert the mark_module to void* ASoC: compress/component: Use module_get_when_open/put_when_close for cstream include/sound/soc-component.h | 14 ++++---- sound/soc/soc-component.c | 61 +++++++++++++++-------------------- sound/soc/soc-compress.c | 43 +++++++++++++++++++++--- 3 files changed, 71 insertions(+), 47 deletions(-) -- 2.33.0 -
Mark Brown authored
Merge series "Extend AHUB audio support for Tegra210 and later" from Sameer Pujar <spujar@nvidia.com>: Earlier as part of series [0], support for ADMAIF and I/O modules (such as I2S, DMIC and DSPK) was added. This series aims at exposing some of the AHUB internal modules (listed below), which can be used for audio pre or post processing. * SFC (Sampling Frequency Converter) * MVC (Master Volume Control) * AMX (Audio Multiplexer) * ADX (Audio Demultiplexer) * Mixer These modules can be plugged into audio paths and relevant processing can be done. The MUX routes are extended to allow add or remove above modules in the path via mixer controls. This is similar to how specific ADMAIF channels are connected to relevant I/O module instances at the moment. Some of these modules can alter PCM parameters. Consider example of resampler (44.1 -> 48 kHz) in the path. aplay(44.1 kHz) -> ADMAIF -> SFC -> (48 kHz) I2S -> (48kHz) Codec The modules following SFC should be using converted sample rate and DAIs need to be configured accordingly. The audio-graph driver provides a mechanism to fixup the new parameters which can be specified in DT for a given DAI. Then core uses these new values via fixup callback and then pass it to respective DAIs hw_param() callback. The "convert-rate", described in [1], property can be used when there is rate conversion in the audio path. Similarly "convert-channels" can be used when there is channel conversion in the path. There is no "convert-xxx" property for sample size conversions. It can be added if necessary. [0] https://www.lkml.org/lkml/2020/7/21/1357 [1] Documentation/devicetree/bindings/sound/audio-graph-port.yaml Changelog ========= v1 -> v2 -------- * Put comments for soft reset application in the drivers. * Split out mute/volume control logic in put() calls of MVC driver and use separate callbacks for the respective kcontrols. * Update kcontrol put() callback in MVC driver to return 1 whenever there is change. Similar change is done in other drivers too. * Use name-prefix.yaml reference for the driver documentation now. * Add sound-name-prefix pattern for MIXER driver and use prefix accordingly in DT. Sameer Pujar (13): ASoC: soc-pcm: Don't reconnect an already active BE ASoC: simple-card-utils: Increase maximum DAI links limit to 512 ASoC: audio-graph: Fixup CPU endpoint hw_params in a BE<->BE link ASoC: dt-bindings: tegra: Few more Tegra210 AHUB modules ASoC: tegra: Add routes for few AHUB modules ASoC: tegra: Add Tegra210 based MVC driver ASoC: tegra: Add Tegra210 based SFC driver ASoC: tegra: Add Tegra210 based AMX driver ASoC: tegra: Add Tegra210 based ADX driver ASoC: tegra: Add Tegra210 based Mixer driver arm64: defconfig: Enable few Tegra210 based AHUB drivers arm64: tegra: Add few AHUB devices for Tegra210 and later arm64: tegra: Extend APE audio support on Jetson platforms .../bindings/sound/nvidia,tegra210-adx.yaml | 76 + .../bindings/sound/nvidia,tegra210-ahub.yaml | 20 + .../bindings/sound/nvidia,tegra210-amx.yaml | 76 + .../bindings/sound/nvidia,tegra210-mixer.yaml | 74 + .../bindings/sound/nvidia,tegra210-mvc.yaml | 76 + .../bindings/sound/nvidia,tegra210-sfc.yaml | 73 + arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts | 1554 ++++++++- arch/arm64/boot/dts/nvidia/tegra186.dtsi | 120 + arch/arm64/boot/dts/nvidia/tegra194-p2972-0000.dts | 1493 +++++++- .../arm64/boot/dts/nvidia/tegra194-p3509-0000.dtsi | 1520 ++++++++- arch/arm64/boot/dts/nvidia/tegra194.dtsi | 116 + arch/arm64/boot/dts/nvidia/tegra210-p2371-2180.dts | 876 +++++ arch/arm64/boot/dts/nvidia/tegra210-p3450-0000.dts | 876 +++++ arch/arm64/boot/dts/nvidia/tegra210.dtsi | 77 + arch/arm64/configs/defconfig | 5 + include/sound/simple_card_utils.h | 2 +- sound/soc/generic/audio-graph-card.c | 4 +- sound/soc/soc-pcm.c | 4 + sound/soc/tegra/Kconfig | 48 + sound/soc/tegra/Makefile | 10 + sound/soc/tegra/tegra210_adx.c | 531 +++ sound/soc/tegra/tegra210_adx.h | 72 + sound/soc/tegra/tegra210_ahub.c | 511 ++- sound/soc/tegra/tegra210_amx.c | 600 ++++ sound/soc/tegra/tegra210_amx.h | 93 + sound/soc/tegra/tegra210_mixer.c | 674 ++++ sound/soc/tegra/tegra210_mixer.h | 100 + sound/soc/tegra/tegra210_mvc.c | 645 ++++ sound/soc/tegra/tegra210_mvc.h | 117 + sound/soc/tegra/tegra210_sfc.c | 3549 ++++++++++++++++++++ sound/soc/tegra/tegra210_sfc.h | 78 + 31 files changed, 13647 insertions(+), 423 deletions(-) create mode 100644 Documentation/devicetree/bindings/sound/nvidia,tegra210-adx.yaml create mode 100644 Documentation/devicetree/bindings/sound/nvidia,tegra210-amx.yaml create mode 100644 Documentation/devicetree/bindings/sound/nvidia,tegra210-mixer.yaml create mode 100644 Documentation/devicetree/bindings/sound/nvidia,tegra210-mvc.yaml create mode 100644 Documentation/devicetree/bindings/sound/nvidia,tegra210-sfc.yaml create mode 100644 sound/soc/tegra/tegra210_adx.c create mode 100644 sound/soc/tegra/tegra210_adx.h create mode 100644 sound/soc/tegra/tegra210_amx.c create mode 100644 sound/soc/tegra/tegra210_amx.h create mode 100644 sound/soc/tegra/tegra210_mixer.c create mode 100644 sound/soc/tegra/tegra210_mixer.h create mode 100644 sound/soc/tegra/tegra210_mvc.c create mode 100644 sound/soc/tegra/tegra210_mvc.h create mode 100644 sound/soc/tegra/tegra210_sfc.c create mode 100644 sound/soc/tegra/tegra210_sfc.h -- 2.7.4
-
Wolfram Sang authored
We have a dedicated pointer for that, so use it. Much easier to read and less computation involved. Signed-off-by:
Wolfram Sang <wsa+renesas@sang-engineering.com> Link: https://lore.kernel.org/r/20210918213553.14514-2-wsa+renesas@sang-engineering.comSigned-off-by:
-
Peter Ujfalusi authored
As part of the effort to remove our old APIs based on outdated terminology update the Intel board drivers to use modern terminology. Signed-off-by:
Peter Ujfalusi <peter.ujfalusi@linux.intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com Link: https://lore.kernel.org/r/20210920065508.7854-1-peter.ujfalusi@linux.intel.comSigned-off-by:
-
Krzysztof Kozlowski authored
Correct several errors in rt5682s dtschema: 1. The examples should be under "examples": 'example' is not one of ['$id', '$schema', 'title', 'description', 'examples', ... 2. Missing type for vendor properties 3. clock-names should be an array: properties:clock-names:items: {'const': 'mclk'} is not of type 'array' 4. Example DTS should include headers: [scripts/Makefile.lib:386: Documentation/devicetree/bindings/sound/realtek,rt5682s.example.dt.yaml] Error 1 5. Node name in example DTS misses unit address and does not match DT convention (generic name): Warning (reg_format): /example-0/rt5682s:reg: property has invalid length (4 bytes) (#address-cells == 1, #size-cells == 1) 6. Node address should be in size-cells:0 block in example DTS: Warning (reg_format): /example-0/codec@1a:reg: property has invalid length (4 bytes) (#address-cells == 1, #size-cells == 1) Fixes: 50159fdb ("ASoC: dt-bindings: rt5682s: add bindings for rt5682s") Signed-off-by:Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Link: https://lore.kernel.org/r/20210920112106.140918-1-krzysztof.kozlowski@canonical.comSigned-off-by:
-
Mark Brown authored
As part of moving to remove the old style defines for the bus clocks update the ab8500 driver to use more modern terminology for clocking. Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20210916141335.43818-1-broonie@kernel.orgSigned-off-by:
-
Peter Ujfalusi authored
sof_get_ops() is not used and the struct sof_ops_table is only used by that macro. Signed-off-by:
Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com> Reviewed-by:
Kai Vehmanen <kai.vehmanen@linux.intel.com> Reviewed-by:
Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20210920064156.4763-1-peter.ujfalusi@linux.intel.comSigned-off-by:
-
Jiapeng Chong authored
This symbol is not used outside of rt5682s.c, so marks it static. Fix the following sparse warning: sound/soc/codecs/rt5682s.c:2848:39: warning: symbol 'rt5682s_soc_component_dev' was not declared. Should it be static? sound/soc/codecs/rt5682s.c:2842:30: warning: symbol 'rt5682s_aif2_dai_ops' was not declared. Should it be static? Reported-by:
Abaci Robot <abaci@linux.alibaba.com> Signed-off-by:
Jiapeng Chong <jiapeng.chong@linux.alibaba.com> Link: https://lore.kernel.org/r/1631955726-77693-1-git-send-email-jiapeng.chong@linux.alibaba.comSigned-off-by:
-
Sameer Pujar authored
The Mixer supports mixing of up to ten 7.1 audio input streams and generate five outputs (each of which can be any combination of the ten input streams) This patch registers Mixer driver with ASoC framework. The component driver exposes DAPM widgets, routes and kcontrols for the device. The DAI driver exposes Mixer interfaces, which can be used to connect different components in the ASoC layer. Makefile and Kconfig support is added to allow build the driver. It can be enabled in the DT via "nvidia,tegra210-amixer" compatible binding. Signed-off-by:
-
Sameer Pujar authored
The Audio Demultiplexer (ADX) block takes an input stream with up to 16 channels and demultiplexes it into four output streams of up to 16 channels each. A byte RAM helps to form output frames by any combination of bytes from the input frame. Its design is identical to that of byte RAM in the AMX except that the data flow direction is reversed. This patch registers ADX driver with ASoC framework. The component driver exposes DAPM widgets, routes and kcontrols for the device. The DAI driver exposes ADX interfaces, which can be used to connect different components in the ASoC layer. Makefile and Kconfig support is added to allow build the driver. It can be enabled in the DT via "nvidia,tegra210-adx" compatible binding. Signed-off-by:
-
Sameer Pujar authored
The Audio Multiplexer (AMX) block can multiplex up to four input streams each of which can have maximum 16 channels and generate an output stream with maximum 16 channels. A byte RAM helps to form an output frame by any combination of bytes from the input frames. This patch registers AMX driver with ASoC framework. The component driver exposes DAPM widgets, routes and kcontrols for the device. The DAI driver exposes AMX interfaces, which can be used to connect different components in the ASoC layer. Makefile and Kconfig support is added to allow build the driver. It can be enabled in the DT via "nvidia,tegra210-amx" for Tegra210 and Tegra186. For Tegra194 and later, "nvidia,tegra194-amx" can be used. Signed-off-by:
-
Sameer Pujar authored
The Sampling Frequency Converter (SFC) converts the sampling frequency of the input signal from one frequency to another. It supports sampling frequency conversions of streams of up to two channels (stereo). This patch registers SFC driver with ASoC framework. The component driver exposes DAPM widgets, routes and kcontrols for the device. The DAI driver exposes SFC interfaces, which can be used to connect different components in the ASoC layer. Makefile and Kconfig support is added to allow build the driver. It can be enabled in the DT via "nvidia,tegra210-sfc" compatible binding. Signed-off-by:
-
