- 04 Jul, 2016 28 commits
-
-
Raghu Vatsavayi authored
This patch removes redundant file includes and conditions. Provides some meaningful comments and code alignment. Signed-off-by:
Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by:
Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by:
Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by:
Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Raghu Vatsavayi authored
This patch removes redudant droq num validation. Signed-off-by:
-
Raghu Vatsavayi authored
This patch limits the MTU between 68 bytes and 16000 bytes. Signed-off-by:
-
Raghu Vatsavayi authored
This patch fixes the issue of proper freeing of queue memory resources during free device. It also has fix for correct pcie error reporting. Signed-off-by:
-
Raghu Vatsavayi authored
This patch removes the dependency of number of iq/oq's on number of cpus. Signed-off-by:
-
Raghu Vatsavayi authored
This patch updates the delay constant for softcommands in accrodance with new requirements. Signed-off-by:
-
Raghu Vatsavayi authored
This patch tries to protect against bh preemption with sc_buf_pool. It also modifies the syncronization primitives during input queue processing. Signed-off-by:
-
Raghu Vatsavayi authored
This patch has minor replacements of ACCESS_ONCE macros with WRITE_ONCE and replacement of BUG_ON with polite version WARN_ON. Signed-off-by:
-
Raghu Vatsavayi authored
This patch adds support for Vxaln offloads in liquidio driver. Signed-off-by:
-
Daniel Borkmann authored
If skb_clear_hash() was invoked due to mangling of relevant headers and BPF program needs skb->hash later on, we can add a helper to trigger hash recalculation via bpf_get_hash_recalc(). The helper will return the newly retrieved hash directly, but later access can also be done via skb context again through skb->hash directly (inline) without needing to call the helper once more. Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Acked-by:
Alexei Starovoitov <ast@kernel.org> Signed-off-by:
-
John Fastabend authored
This adds samples for pktgen to use with new mode to inject pkts into the qdisc layer. This also doubles as nice test cases to test any patches against qdisc layer. Signed-off-by:
John Fastabend <john.r.fastabend@intel.com> Signed-off-by:
-
John Fastabend authored
Add another xmit_mode to pktgen to allow testing xmit functionality of qdiscs. The new mode "queue_xmit" injects packets at __dev_queue_xmit() so that qdisc is called. Signed-off-by:
-
Philippe Reynes authored
There are two generics functions phy_ethtool_{get|set}_link_ksettings, so we can use them instead of defining the same code in the driver. Signed-off-by:Philippe Reynes <tremyfr@gmail.com> Signed-off-by:
-
Philippe Reynes authored
The private structure contain a pointer to phydev, but the structure net_device already contain such pointer. So we can remove the pointer phy in the private structure, and update the driver to use the one contained in struct net_device. Signed-off-by:
-
Philippe Reynes authored
There are two generics functions phy_ethtool_{get|set}_link_ksettings, so we can use them instead of defining the same code in the driver. Signed-off-by: -
Philippe Reynes authored
The private structure contain a pointer to phydev, but the structure net_device already contain such pointer. So we can remove the pointer phy in the private structure, and update the driver to use the one contained in struct net_device. Signed-off-by:
-
Philippe Reynes authored
There are two generics functions phy_ethtool_{get|set}_link_ksettings, so we can use them instead of defining the same code in the driver. Signed-off-by: -
Philippe Reynes authored
The private structure contain a pointer to phydev, but the structure net_device already contain such pointer. So we can remove the pointer phy in the private structure, and update the driver to use the one contained in struct net_device. Signed-off-by:
-
Philippe Reynes authored
There are two generics functions phy_ethtool_{get|set}_link_ksettings, so we can use them instead of defining the same code in the driver. Signed-off-by: -
Philippe Reynes authored
The private structure contain a pointer to phydev, but the structure net_device already contain such pointer. So we can remove the pointer phy in the private structure, and update the driver to use the one contained in struct net_device. Signed-off-by:
-
Philippe Reynes authored
There are two generics functions phy_ethtool_{get|set}_link_ksettings, so we can use them instead of defining the same code in the driver. Signed-off-by: -
Philippe Reynes authored
The private structure contain a pointer to phydev, but the structure net_device already contain such pointer. So we can remove the pointer phy in the private structure, and update the driver to use the one contained in struct net_device. Signed-off-by:
-
Philippe Reynes authored
There are two generics functions phy_ethtool_{get|set}_link_ksettings, so we can use them instead of defining the same code in the driver. Signed-off-by: -
Philippe Reynes authored
The private structure contain a pointer to phydev, but the structure net_device already contain such pointer. So we can remove the pointer phy in the private structure, and update the driver to use the one contained in struct net_device. Signed-off-by:
-
Christophe Jaillet authored
Silent a few smatch warnings about indentation. This include the removal of a 'return' statement in 'resource_tracker.c'. This 'return' will still be performed when breaking out of the corresponding 'switch' block. Signed-off-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by:
Leon Romanovsky <leonro@mellanox.com> Signed-off-by:
-
Jamal Hadi Salim authored
Signed-off-by:
Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by:
-
Jamal Hadi Salim authored
Extremely useful for setting packet type to host so i dont have to modify the dst mac address using pedit (which requires that i know the mac address) Example usage: tc filter add dev eth0 parent ffff: protocol ip pref 9 u32 \ match ip src 5.5.5.5/32 \ flowid 1:5 action skbedit ptype host This will tag all packets incoming from 5.5.5.5 with type PACKET_HOST Signed-off-by:
-
Jamal Hadi Salim authored
Suggested-by:
-
- 02 Jul, 2016 12 commits
-
-
John Crispin authored
commit 80673029 ("net-next: mediatek: add support for IRQ grouping") failed to properly update the irq handling inside mtk_poll_controller() causing compile errors if netconsole was enabled. Fix this by updating the code to use the new separated irq handler function for RX. Signed-off-by:
John Crispin <john@phrozen.org> Signed-off-by:
-
David S. Miller authored
Jiri Pirko says: ==================== mlxsw: Lay the groundwork for the introduction of router interfaces This is first patchset on a way to introduce ipv4 routing offload support in mlxsw driver. Does preparations before router interfaces will be introduced in mlxsw. ==================== Signed-off-by: -
Jiri Pirko authored
ip2me: To instruct HW to send trapped ip2me traffic to kernel, we have to add this trap. Selection ip2me traffic is introduced later on in this set. ARPs: We are going to stop flooding to CPU port when netdev isn't bridged and only get packets destined to the netdev's IP address and certain control packets. Add traps for ARP request (broadcast) and response (unicast) in order to get these to the CPU and resolve neighbours. host miss: If a packet is routed through a directly connected route and its destination IP is not in the device's neighbour table, then we need to trap it to CPU. This will cause the host to resolve the MAC of the neighbour, which will be eventually programmed to the device's table. router ingress: In order to trap packets in router part. Signed-off-by:
Ido Schimmel <idosch@mellanox.com> Signed-off-by:
Jiri Pirko <jiri@mellanox.com> Signed-off-by:
-
Ido Schimmel authored
When removing packet traps we should use action 'discard' instead of 'forward', as some trap IDs we'll add cannot be configured with the later. However, result is the same, as packets are not trapped to the CPU. In the future we will be able to reverse the operation properly by detaching the trap group from the CPU. Signed-off-by:
-
Ido Schimmel authored
Add the Router Interface Table Register (RITR), which allows us to create and configure router interfaces (RIFs). Signed-off-by:
-
Ido Schimmel authored
Incoming packets are directed to the router when they match an FDB entry with action forward to IP router. Add this action, which was mistakenly named "TRAP". Signed-off-by:
-
Ido Schimmel authored
When enabling the router in the device we will represent L3 netdevs using router interfaces (RIFs). These will be specified whenever programming routes or neighbours on the netdev. Introduce the basic RIF infrastructure which allows one to lookup a RIF by its netdev. Later patches in the series will extend this, but the basic routines are needed now in order to direct traffic to CPU. Pointers to the RIF structs are stored in an array indexed by the RIF's number. This will allow us to efficiently update the kernel's neighbour table when regularly dumping the device's table. Signed-off-by:
-
Ido Schimmel authored
Create a skeleton router file and do basic HW initialization of router. Signed-off-by:
-
Ido Schimmel authored
During ports initialization a net device is registered for each available port, which implies the port is usable. However, a port is only usable after the different parts of the device (e.g. flooding, buffers) are initialized. This is especially important now, when we must initialize the router before the ports, as otherwise the device can't be initialized. Solve that by initializing the switch ports at the end of init sequence. Also, remove an unnecessary warning about port up/down events, which would otherwise be invoked whenever removing the driver, as ports are removed before unregistering the listener for these events. Signed-off-by:
-
Ido Schimmel authored
Add the Router General Configuration Register (RGCR), which allows us to enable the router in the device and configure its various parameters. Signed-off-by:
-
Ido Schimmel authored
We are going to assign router interfaces (RIFs) to netdevs if an IPv4 address was assigned to them. If one was assigned to a port netdev, this will translate to the PVID vPort being member in a RIF. While it's possible for a LAG slave to have an IP address, we can't have a vPort being member in two FIDs (assuming the LAG device will be put in bridge / assigned an IP address). Solve that by making the PVID vPort leave any FID it might be a member in when joining / leaving LAG. Note that the PVID vPort is the only vPort that can be present on the port when it's put under LAG. Signed-off-by:
-
Ido Schimmel authored
When VLAN devices are created on top of LAG, their underlying vPorts are configured correctly with LAG membership. However, the PVID vPort is implicit and already present when the port netdev is put under LAG, so its LAG membership is never set. Set it correctly when joining / leaving LAG. This didn't matter until now, but we are going to introduce support for router interfaces (RIFs), which need to take into account LAG membership. Signed-off-by:
-
