- 16 Jul, 2021 20 commits
-
-
Cong Wang authored
Add two test cases to ensure redirection between udp and unix work bidirectionally. Signed-off-by:
Cong Wang <cong.wang@bytedance.com> Signed-off-by:
Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20210704190252.11866-12-xiyou.wangcong@gmail.com
-
Cong Wang authored
Add a test case to ensure redirection between two AF_UNIX datagram sockets work. Signed-off-by:
-
Cong Wang authored
Factor out a common helper add_to_sockmap() which adds two sockets into a sockmap. Signed-off-by:
-
Cong Wang authored
Factor out a common helper udp_socketpair() which creates a pair of connected UDP sockets. Signed-off-by:
-
Cong Wang authored
We have to implement unix_dgram_bpf_recvmsg() to replace the original ->recvmsg() to retrieve skmsg from ingress_msg. AF_UNIX is again special here because the lack of sk_prot->recvmsg(). I simply add a special case inside unix_dgram_recvmsg() to call sk->sk_prot->recvmsg() directly. Signed-off-by:
-
Cong Wang authored
Now we can implement unix_bpf_update_proto() to update sk_prot, especially prot->close(). Signed-off-by:
-
Cong Wang authored
Unlike af_inet, unix_proto is very different, it does not even have a ->close(). We have to add a dummy implementation to satisfy sockmap. Normally it is just a nop, it is introduced only for sockmap to replace it. Signed-off-by:
-
Cong Wang authored
Currently only unix stream socket sets TCP_ESTABLISHED, datagram socket can set this too when they connect to its peer socket. At least __ip4_datagram_connect() does the same. This will be used to determine whether an AF_UNIX datagram socket can be redirected to in sockmap. Signed-off-by:
-
Cong Wang authored
Implement ->read_sock() for AF_UNIX datagram socket, it is pretty much similar to udp_read_sock(). Signed-off-by:
-
Cong Wang authored
TCP and other connection oriented sockets have accept() for each incoming connection on the server side, hence they can just insert those fd's from accept() to sockmap, which are of course established. Now with datagram sockets begin to support sockmap and redirection, the restriction is no longer applicable to them, as they have no accept(). So we have to lift this restriction for them. This is fine, because inside bpf_sk_redirect_map() we still have another socket status check, sock_map_redirect_allowed(), as a guard. This also means they do not have to be removed from sockmap when disconnecting. Signed-off-by:
-
Cong Wang authored
Currently sock_map still has Kconfig dependency on CONFIG_INET, but there is no actual functional dependency on it after we introduce ->psock_update_sk_prot(). We have to extend it to CONFIG_NET now as we are going to support AF_UNIX. Signed-off-by:
-
Alexei Starovoitov authored
Jiri Olsa says: ==================== Add bpf_get_func_ip helper that returns IP address of the caller function for trampoline and krobe programs. There're 2 specific implementation of the bpf_get_func_ip helper, one for trampoline progs and one for kprobe/kretprobe progs. The trampoline helper call is replaced/inlined by the verifier with simple move instruction. The kprobe/kretprobe is actual helper call that returns prepared caller address. Also available at: https://git.kernel.org/pub/scm/linux/kernel/git/jolsa/perf.git bpf/get_func_ip v4 changes: - dropped jit/x86 check for get_func_ip tracing check [Alexei] - added code to bpf_get_func_ip_tracing [Alexei] and tested that it works without inlining [Alexei] - changed has_get_func_ip to check_get_func_ip [Andrii] - replaced test assert loop with explicit asserts [Andrii] - adde bpf_program__attach_kprobe_opts function and use it for offset setup [Andrii] - used bpf_program__set_autoload(false) for test6 [Andrii] - added Masami's ack v3 changes: - resend with Masami in cc and v3 in each patch subject v2 changes: - use kprobe_running to get kprobe instead of cpu var [Masami] - added support to add kprobe on function+offset and test for that [Alan] ==================== Signed-off-by:
-
Jiri Olsa authored
Adding test for bpf_get_func_ip in kprobe+ofset probe. Because of the offset value it's arch specific, enabling the new test only for x86_64 architecture. Signed-off-by:
Jiri Olsa <jolsa@kernel.org> Signed-off-by:
-
Alan Maguire authored
kprobes can be placed on most instructions in a function, not just entry, and ftrace and bpftrace support the function+offset notification for probe placement. Adding parsing of func_name into func+offset to bpf_program__attach_kprobe() allows the user to specify SEC("kprobe/bpf_fentry_test5+0x6") ...for example, and the offset can be passed to perf_event_open_probe() to support kprobe attachment. Signed-off-by:Alan Maguire <alan.maguire@oracle.com> Signed-off-by:
-
Jiri Olsa authored
Adding bpf_program__attach_kprobe_opts that does the same as bpf_program__attach_kprobe, but takes opts argument. Currently opts struct holds just retprobe bool, but we will add new field in following patch. The function is not exported, so there's no need to add size to the struct bpf_program_attach_kprobe_opts for now. Signed-off-by:
-
Jiri Olsa authored
Adding test for bpf_get_func_ip helper for fentry, fexit, kprobe, kretprobe and fmod_ret programs. Signed-off-by:
-
Jiri Olsa authored
Adding bpf_get_func_ip helper for BPF_PROG_TYPE_KPROBE programs, so it's now possible to call bpf_get_func_ip from both kprobe and kretprobe programs. Taking the caller's address from 'struct kprobe::addr', which is defined for both kprobe and kretprobe. Signed-off-by:
Masami Hiramatsu <mhiramat@kernel.org> Link: https://lore.kernel.org/bpf/20210714094400.396467-5-jolsa@kernel.org
-
Jiri Olsa authored
Adding bpf_get_func_ip helper for BPF_PROG_TYPE_TRACING programs, specifically for all trampoline attach types. The trampoline's caller IP address is stored in (ctx - 8) address. so there's no reason to actually call the helper, but rather fixup the call instruction and return [ctx - 8] value directly. Signed-off-by:
-
Jiri Olsa authored
Enabling BPF_TRAMP_F_IP_ARG for trampolines that actually need it. The BPF_TRAMP_F_IP_ARG adds extra 3 instructions to trampoline code and is used only by programs with bpf_get_func_ip helper, which is added in following patch and sets call_get_func_ip bit. This patch ensures that BPF_TRAMP_F_IP_ARG flag is used only for trampolines that have programs with call_get_func_ip set. Signed-off-by:
-
Jiri Olsa authored
Storing caller's ip in trampoline's stack. Trampoline programs can reach the IP in (ctx - 8) address, so there's no change in program's arguments interface. The IP address is takes from [fp + 8], which is return address from the initial 'call fentry' call to trampoline. This IP address will be returned via bpf_get_func_ip helper helper, which is added in following patches. Signed-off-by:
-
- 15 Jul, 2021 16 commits
-
-
Daniel Borkmann authored
Alexei Starovoitov says: ==================== The first request to support timers in bpf was made in 2013 before sys_bpf syscall was added. That use case was periodic sampling. It was address with attaching bpf programs to perf_events. Then during XDP development the timers were requested to do garbage collection and health checks. They were worked around by implementing timers in user space and triggering progs with BPF_PROG_RUN command. The user space timers and perf_event+bpf timers are not armed by the bpf program. They're done asynchronously vs program execution. The XDP program cannot send a packet and arm the timer at the same time. The tracing prog cannot record an event and arm the timer right away. This large class of use cases remained unaddressed. The jiffy based and hrtimer based timers are essential part of the kernel development and with this patch set the hrtimer based timers will be available to bpf programs. TLDR: bpf timers is a wrapper of hrtimers with all the extra safety added to make sure bpf progs cannot crash the kernel. v6->v7: - address Andrii's comments and add his Acks. v5->v6: - address code review feedback from Martin and add his Acks. - add usercnt > 0 check to bpf_timer_init and remove timers_cancel_and_free second loop in map_free callbacks. - add cond_resched_rcu. v4->v5: - Martin noticed the following issues: . prog could be reallocated bpf_patch_insn_data(). Fixed by passing 'aux' into bpf_timer_set_callback, since 'aux' is stable during insn patching. . Added missing rcu_read_lock. . Removed redundant record_map. - Discovered few bugs with stress testing: . One cpu does htab_free_prealloced_timers->bpf_timer_cancel_and_free->hrtimer_cancel while another is trying to do something with the timer like bpf_timer_start/set_callback. Those ops try to acquire bpf_spin_lock that is already taken by bpf_timer_cancel_and_free, so both cpus spin forever. The same problem existed in bpf_timer_cancel(). One bpf prog on one cpu might call bpf_timer_cancel and wait, while another cpu is in the timer callback that tries to do bpf_timer_*() helper on the same timer. The fix is to do drop_prog_refcnt() and unlock. And only then hrtimer_cancel. Because of this had to add callback_fn != NULL check to bpf_timer_cb(). Also removed redundant bpf_prog_inc/put from bpf_timer_cb() and replaced with rcu_dereference_check similar to recent rcu_read_lock-removal from drivers. bpf_timer_cb is in softirq. . Managed to hit refcnt==0 while doing bpf_prog_put from bpf_timer_cancel_and_free(). That exposed the issue that bpf_prog_put wasn't ready to be called from irq context. Fixed similar to bpf_map_put which is irq ready. - Refactored BPF_CALL_1(bpf_spin_lock) into __bpf_spin_lock_irqsave() to make the main logic more clear, since Martin and Yonghong brought up this concern. v3->v4: 1. Split callback_fn from bpf_timer_start into bpf_timer_set_callback as suggested by Martin. That makes bpf timer api match one to one to kernel hrtimer api and provides greater flexibility. 2. Martin also discovered the following issue with uref approach: bpftool prog load xdp_timer.o /sys/fs/bpf/xdp_timer type xdp bpftool net attach xdpgeneric pinned /sys/fs/bpf/xdp_timer dev lo rm /sys/fs/bpf/xdp_timer nc -6 ::1 8888 bpftool net detach xdpgeneric dev lo The timer callback stays active in the kernel though the prog was detached and map usercnt == 0. It happened because 'bpftool prog load' pinned the prog only. The map usercnt went to zero. Subsequent attach and runs didn't affect map usercnt. The timer was able to start and bpf_prog_inc itself. When the prog was detached the prog stayed active. To address this issue added if (!atomic64_read(&(t->map->usercnt))) return -EPERM; to the first patch. Which means that timers are allowed only in the maps that are held by user space with open file descriptor or maps pinned in bpffs. 3. Discovered that timers in inner maps were broken. The inner map pointers are dynamic. Therefore changed bpf_timer_init() to accept explicit map pointer supplied by the program instead of hidden map pointer supplied by the verifier. To make sure that pointer to a timer actually belongs to that map added the verifier check in patch 3. 4. Addressed Yonghong's feedback. Improved comments and added dynamic in_nmi() check. Added Acks. v2->v3: The v2 approach attempted to bump bpf_prog refcnt when bpf_timer_start is called to make sure callback code doesn't disappear when timer is active and drop refcnt when timer cb is done. That led to a ton of race conditions between callback running and concurrent bpf_timer_init/start/cancel on another cpu, and concurrent bpf_map_update/delete_elem, and map destroy. Then v2.5 approach skipped prog refcnt altogether. Instead it remembered all timers that bpf prog armed in a link list and canceled them when prog refcnt went to zero. The race conditions disappeared, but timers in map-in-map could not be supported cleanly, since timers in inner maps have inner map's life time and don't match prog's life time. This v3 approach makes timers to be owned by maps. It allows timers in inner maps to be supported from the start. This apporach relies on "user refcnt" scheme used in prog_array that stores bpf programs for bpf_tail_call. The bpf_timer_start() increments prog refcnt, but unlike 1st approach the timer callback does decrement the refcnt. The ops->map_release_uref is responsible for cancelling the timers and dropping prog refcnt when user space reference to a map is dropped. That addressed all the races and simplified locking. Andrii presented a use case where specifying callback_fn in bpf_timer_init() is inconvenient vs specifying in bpf_timer_start(). The bpf_timer_init() typically is called outside for timer callback, while bpf_timer_start() most likely will be called from the callback. timer_cb() { ... bpf_timer_start(timer_cb); ...} looks like recursion and as infinite loop to the verifier. The verifier had to be made smarter to recognize such async callbacks. Patches 7,8,9 addressed that. Patch 1 and 2 refactoring. Patch 3 implements bpf timer helpers and locking. Patch 4 implements map side of bpf timer support. Patch 5 prevent pointer mismatch in bpf_timer_init. Patch 6 adds support for BTF in inner maps. Patch 7 teaches check_cfg() pass to understand async callbacks. Patch 8 teaches do_check() pass to understand async callbacks. Patch 9 teaches check_max_stack_depth() pass to understand async callbacks. Patches 10 and 11 are the tests. v1->v2: - Addressed great feedback from Andrii and Toke. - Fixed race between parallel bpf_timer_*() ops. - Fixed deadlock between timer callback and LRU eviction or bpf_map_delete/update. - Disallowed mmap and global timers. - Allow spin_lock and bpf_timer in an element. - Fixed memory leaks due to map destruction and LRU eviction. - A ton more tests. ==================== Signed-off-by:Daniel Borkmann <daniel@iogearbox.net>
-
Alexei Starovoitov authored
Check that map-in-map supports bpf timers. Check that indirect "recursion" of timer callbacks works: timer_cb1() { bpf_timer_set_callback(timer_cb2); } timer_cb2() { bpf_timer_set_callback(timer_cb1); } Check that bpf_map_release htab_free_prealloced_timers bpf_timer_cancel_and_free hrtimer_cancel works while timer cb is running. "while true; do ./test_progs -t timer_mim; done" is a great stress test. It caught missing timer cancel in htab->extra_elems. timer_mim_reject.c is a negative test that checks that timer<->map mismatch is prevented. Signed-off-by:Andrii Nakryiko <andrii@kernel.org> Acked-by:
Toke Høiland-Jørgensen <toke@redhat.com> Link: https://lore.kernel.org/bpf/20210715005417.78572-12-alexei.starovoitov@gmail.com
-
Alexei Starovoitov authored
Add bpf_timer test that creates timers in preallocated and non-preallocated hash, in array and in lru maps. Let array timer expire once and then re-arm it for 35 seconds. Arm lru timer into the same callback. Then arm and re-arm hash timers 10 times each. At the last invocation of prealloc hash timer cancel the array timer. Force timer free via LRU eviction and direct bpf_map_delete_elem. Signed-off-by:
-
Alexei Starovoitov authored
Teach max stack depth checking algorithm about async callbacks that don't increase bpf program stack size. Also add sanity check that bpf_tail_call didn't sneak into async cb. It's impossible, since PTR_TO_CTX is not available in async cb, hence the program cannot contain bpf_tail_call(ctx,...); Signed-off-by:
-
Alexei Starovoitov authored
bpf_for_each_map_elem() and bpf_timer_set_callback() helpers are relying on PTR_TO_FUNC infra in the verifier to validate addresses to subprograms and pass them into the helpers as function callbacks. In case of bpf_for_each_map_elem() the callback is invoked synchronously and the verifier treats it as a normal subprogram call by adding another bpf_func_state and new frame in __check_func_call(). bpf_timer_set_callback() doesn't invoke the callback directly. The subprogram will be called asynchronously from bpf_timer_cb(). Teach the verifier to validate such async callbacks as special kind of jump by pushing verifier state into stack and let pop_stack() process it. Special care needs to be taken during state pruning. The call insn doing bpf_timer_set_callback has to be a prune_point. Otherwise short timer callbacks might not have prune points in front of bpf_timer_set_callback() which means is_state_visited() will be called after this call insn is processed in __check_func_call(). Which means that another async_cb state will be pushed to be walked later and the verifier will eventually hit BPF_COMPLEXITY_LIMIT_JMP_SEQ limit. Since push_async_cb() looks like another push_stack() branch the infinite loop detection will trigger false positive. To recognize this case mark such states as in_async_callback_fn. To distinguish infinite loop in async callback vs the same callback called with different arguments for different map and timer add async_entry_cnt to bpf_func_state. Enforce return zero from async callbacks. Signed-off-by:
-
Alexei Starovoitov authored
In the following bpf subprogram: static int timer_cb(void *map, void *key, void *value) { bpf_timer_set_callback(.., timer_cb); } the 'timer_cb' is a pointer to a function. ld_imm64 insn is used to carry this pointer. bpf_pseudo_func() returns true for such ld_imm64 insn. Unlike bpf_for_each_map_elem() the bpf_timer_set_callback() is asynchronous. Relax control flow check to allow such "recursion" that is seen as an infinite loop by check_cfg(). The distinction between bpf_for_each_map_elem() the bpf_timer_set_callback() is done in the follow up patch. Signed-off-by: -
Alexei Starovoitov authored
BTF is required for 'struct bpf_timer' to be recognized inside map value. The bpf timers are supported inside inner maps. Remember 'struct btf *' in inner_map_meta to make it available to the verifier in the sequence: struct bpf_map *inner_map = bpf_map_lookup_elem(&outer_map, ...); if (inner_map) timer = bpf_map_lookup_elem(&inner_map, ...); Signed-off-by:Yonghong Song <yhs@fb.com> Acked-by:
Martin KaFai Lau <kafai@fb.com> Acked-by:
-
Alexei Starovoitov authored
bpf_timer_init() arguments are: 1. pointer to a timer (which is embedded in map element). 2. pointer to a map. Make sure that pointer to a timer actually belongs to that map. Use map_uid (which is unique id of inner map) to reject: inner_map1 = bpf_map_lookup_elem(outer_map, key1) inner_map2 = bpf_map_lookup_elem(outer_map, key2) if (inner_map1 && inner_map2) { timer = bpf_map_lookup_elem(inner_map1); if (timer) // mismatch would have been allowed bpf_timer_init(timer, inner_map2); } Signed-off-by: -
Alexei Starovoitov authored
Restrict bpf timers to array, hash (both preallocated and kmalloced), and lru map types. The per-cpu maps with timers don't make sense, since 'struct bpf_timer' is a part of map value. bpf timers in per-cpu maps would mean that the number of timers depends on number of possible cpus and timers would not be accessible from all cpus. lpm map support can be added in the future. The timers in inner maps are supported. The bpf_map_update/delete_elem() helpers and sys_bpf commands cancel and free bpf_timer in a given map element. Similar to 'struct bpf_spin_lock' BTF is required and it is used to validate that map element indeed contains 'struct bpf_timer'. Make check_and_init_map_value() init both bpf_spin_lock and bpf_timer when map element data is reused in preallocated htab and lru maps. Teach copy_map_value() to support both bpf_spin_lock and bpf_timer in a single map element. There could be one of each, but not more than one. Due to 'one bpf_timer in one element' restriction do not support timers in global data, since global data is a map of single element, but from bpf program side it's seen as many global variables and restriction of single global timer would be odd. The sys_bpf map_freeze and sys_mmap syscalls are not allowed on maps with timers, since user space could have corrupted mmap element and crashed the kernel. The maps with timers cannot be readonly. Due to these restrictions search for bpf_timer in datasec BTF in case it was placed in the global data to report clear error. The previous patch allowed 'struct bpf_timer' as a first field in a map element only. Relax this restriction. Refactor lru map to s/bpf_lru_push_free/htab_lru_push_free/ to cancel and free the timer when lru map deletes an element as a part of it eviction algorithm. Make sure that bpf program cannot access 'struct bpf_timer' via direct load/store. The timer operation are done through helpers only. This is similar to 'struct bpf_spin_lock'. Signed-off-by:
-
Alexei Starovoitov authored
Introduce 'struct bpf_timer { __u64 :64; __u64 :64; };' that can be embedded in hash/array/lru maps as a regular field and helpers to operate on it: // Initialize the timer. // First 4 bits of 'flags' specify clockid. // Only CLOCK_MONOTONIC, CLOCK_REALTIME, CLOCK_BOOTTIME are allowed. long bpf_timer_init(struct bpf_timer *timer, struct bpf_map *map, int flags); // Configure the timer to call 'callback_fn' static function. long bpf_timer_set_callback(struct bpf_timer *timer, void *callback_fn); // Arm the timer to expire 'nsec' nanoseconds from the current time. long bpf_timer_start(struct bpf_timer *timer, u64 nsec, u64 flags); // Cancel the timer and wait for callback_fn to finish if it was running. long bpf_timer_cancel(struct bpf_timer *timer); Here is how BPF program might look like: struct map_elem { int counter; struct bpf_timer timer; }; struct { __uint(type, BPF_MAP_TYPE_HASH); __uint(max_entries, 1000); __type(key, int); __type(value, struct map_elem); } hmap SEC(".maps"); static int timer_cb(void *map, int *key, struct map_elem *val); /* val points to particular map element that contains bpf_timer. */ SEC("fentry/bpf_fentry_test1") int BPF_PROG(test1, int a) { struct map_elem *val; int key = 0; val = bpf_map_lookup_elem(&hmap, &key); if (val) { bpf_timer_init(&val->timer, &hmap, CLOCK_REALTIME); bpf_timer_set_callback(&val->timer, timer_cb); bpf_timer_start(&val->timer, 1000 /* call timer_cb2 in 1 usec */, 0); } } This patch adds helper implementations that rely on hrtimers to call bpf functions as timers expire. The following patches add necessary safety checks. Only programs with CAP_BPF are allowed to use bpf_timer. The amount of timers used by the program is constrained by the memcg recorded at map creation time. The bpf_timer_init() helper needs explicit 'map' argument because inner maps are dynamic and not known at load time. While the bpf_timer_set_callback() is receiving hidden 'aux->prog' argument supplied by the verifier. The prog pointer is needed to do refcnting of bpf program to make sure that program doesn't get freed while the timer is armed. This approach relies on "user refcnt" scheme used in prog_array that stores bpf programs for bpf_tail_call. The bpf_timer_set_callback() will increment the prog refcnt which is paired with bpf_timer_cancel() that will drop the prog refcnt. The ops->map_release_uref is responsible for cancelling the timers and dropping prog refcnt when user space reference to a map reaches zero. This uref approach is done to make sure that Ctrl-C of user space process will not leave timers running forever unless the user space explicitly pinned a map that contained timers in bpffs. bpf_timer_init() and bpf_timer_set_callback() will return -EPERM if map doesn't have user references (is not held by open file descriptor from user space and not pinned in bpffs). The bpf_map_delete_elem() and bpf_map_update_elem() operations cancel and free the timer if given map element had it allocated. "bpftool map update" command can be used to cancel timers. The 'struct bpf_timer' is explicitly __attribute__((aligned(8))) because '__u64 :64' has 1 byte alignment of 8 byte padding. Signed-off-by: -
Alexei Starovoitov authored
Move ____bpf_spin_lock/unlock into helpers to make it more clear that quadruple underscore bpf_spin_lock/unlock are irqsave/restore variants. Signed-off-by:
-
Alexei Starovoitov authored
Currently bpf_prog_put() is called from the task context only. With addition of bpf timers the timer related helpers will start calling bpf_prog_put() from irq-saved region and in rare cases might drop the refcnt to zero. To address this case, first, convert bpf_prog_free_id() to be irq-save (this is similar to bpf_map_free_id), and, second, defer non irq appropriate calls into work queue. For example: bpf_audit_prog() is calling kmalloc and wake_up_interruptible, bpf_prog_kallsyms_del_all()->bpf_ksym_del()->spin_unlock_bh(). They are not safe with irqs disabled. Signed-off-by:
-
Tobias Klauser authored
The variable buf is unused since commit 005edd16 ("selftests/bpf: convert bpf tunnel test to BPF_ADJ_ROOM_MAC"). Remove it to fix the following warning: test_tc_tunnel.c:531:7: warning: unused variable 'buf' [-Wunused-variable] Fixes: 005edd16 ("selftests/bpf: convert bpf tunnel test to BPF_ADJ_ROOM_MAC") Signed-off-by:
Tobias Klauser <tklauser@distanz.ch> Signed-off-by:
Willem de Bruijn <willemb@google.com> Acked-by:
John Fastabend <john.fastabend@gmail.com> Link: https://lore.kernel.org/bpf/20210713102719.8890-1-tklauser@distanz.ch
-
He Fengqing authored
In bpf_patch_insn_data(), we first use the bpf_patch_insn_single() to insert new instructions, then use adjust_insn_aux_data() to adjust insn_aux_data. If the old env->prog have no enough room for new inserted instructions, we use bpf_prog_realloc to construct new_prog and free the old env->prog. There have two errors here. First, if adjust_insn_aux_data() return ENOMEM, we should free the new_prog. Second, if adjust_insn_aux_data() return ENOMEM, bpf_patch_insn_data() will return NULL, and env->prog has been freed in bpf_prog_realloc, but we will use it in bpf_check(). So in this patch, we make the adjust_insn_aux_data() never fails. In bpf_patch_insn_data(), we first pre-malloc memory for the new insn_aux_data, then call bpf_patch_insn_single() to insert new instructions, at last call adjust_insn_aux_data() to adjust insn_aux_data. Fixes: 8041902d ("bpf: adjust insn_aux_data when patching insns") Signed-off-by:
He Fengqing <hefengqing@huawei.com> Signed-off-by:
Song Liu <songliubraving@fb.com> Link: https://lore.kernel.org/bpf/20210714101815.164322-1-hefengqing@huawei.com
-
Kuniyuki Iwashima authored
Fix s/BPF_MAP_TYPE_REUSEPORT_ARRAY/BPF_MAP_TYPE_REUSEPORT_SOCKARRAY/ typo in bpf.h. Fixes: 2dbb9b9e ("bpf: Introduce BPF_PROG_TYPE_SK_REUSEPORT") Signed-off-by:
Kuniyuki Iwashima <kuniyu@amazon.co.jp> Signed-off-by:
-
Alexei Starovoitov authored
Commit 47316f4a missed updating tools/.../bpf.h. Sync it. Fixes: 47316f4a ("bpf: Support input xdp_md context in BPF_PROG_TEST_RUN") Signed-off-by:
-
- 12 Jul, 2021 1 commit
-
-
Martynas Pumputis authored
When loading a BPF program with a pinned map, the loader checks whether the pinned map can be reused, i.e. their properties match. To derive such of the pinned map, the loader invokes BPF_OBJ_GET_INFO_BY_FD and then does the comparison. Unfortunately, on < 4.12 kernels the BPF_OBJ_GET_INFO_BY_FD is not available, so loading the program fails with the following error: libbpf: failed to get map info for map FD 5: Invalid argument libbpf: couldn't reuse pinned map at '/sys/fs/bpf/tc/globals/cilium_call_policy': parameter mismatch" libbpf: map 'cilium_call_policy': error reusing pinned map libbpf: map 'cilium_call_policy': failed to create: Invalid argument(-22) libbpf: failed to load object 'bpf_overlay.o' To fix this, fallback to derivation of the map properties via /proc/$PID/fdinfo/$MAP_FD if BPF_OBJ_GET_INFO_BY_FD fails with EINVAL, which can be used as an indicator that the kernel doesn't support the latter. Signed-off-by:
Martynas Pumputis <m@lambda.lt> Signed-off-by:
-
- 08 Jul, 2021 3 commits
-
-
Jesper Dangaard Brouer authored
Experience from production shows queue size of 192 is too small, as this caused packet drops during cpumap-enqueue on RX-CPU. This can be diagnosed with xdp_monitor sample program. This bpftrace program was used to diagnose the problem in more detail: bpftrace -e ' tracepoint:xdp:xdp_cpumap_kthread { @deq_bulk = lhist(args->processed,0,10,1); @drop_net = lhist(args->drops,0,10,1) } tracepoint:xdp:xdp_cpumap_enqueue { @enq_bulk = lhist(args->processed,0,10,1); @enq_drops = lhist(args->drops,0,10,1); }' Watch out for the @enq_drops counter. The @drop_net counter can happen when netstack gets invalid packets, so don't despair it can be natural, and that counter will likely disappear in newer kernels as it was a source of confusion (look at netstat info for reason of the netstack @drop_net counters). The production system was configured with CPU power-saving C6 state. Learn more in this blogpost[1]. And wakeup latency in usec for the states are: # grep -H . /sys/devices/system/cpu/cpu0/cpuidle/*/latency /sys/devices/system/cpu/cpu0/cpuidle/state0/latency:0 /sys/devices/system/cpu/cpu0/cpuidle/state1/latency:2 /sys/devices/system/cpu/cpu0/cpuidle/state2/latency:10 /sys/devices/system/cpu/cpu0/cpuidle/state3/latency:133 Deepest state take 133 usec to wakeup from (133/10^6). The link speed is 25Gbit/s ((25*10^9/8) in bytes/sec). How many bytes can arrive with in 133 usec at this speed: (25*10^9/8)*(133/10^6) = 415625 bytes. With MTU size packets this is 275 packets, and with minimum Ethernet (incl intergap overhead) 84 bytes it is 4948 packets. Clearly default queue size is too small. Setting default cpumap queue to 2048 as worst-case (small packet) at 10Gbit/s is 1979 packets with 133 usec wakeup time, +64 packet before kthread wakeup call (due to xdp_do_flush) worst-case 2043 packets. Thus, if a packet burst on RX-CPU will enqueue packets to a remote cpumap CPU that is in deep-sleep state it can overrun the cpumap queue. The production system was also configured to avoid deep-sleep via: tuned-adm profile network-latency [1] https://jeremyeder.com/2013/08/30/oh-did-you-expect-the-cpu/Signed-off-by:Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by:
-
Alexei Starovoitov authored
Kumar Kartikeya says: ==================== This small series makes some improvements to generic XDP mode and brings it closer to native XDP. Patch 1 splits out generic XDP processing into reusable parts, patch 2 adds pointer friendly wrappers for bitops (not have to cast back and forth the address of local pointer to unsigned long *), patch 3 implements generic cpumap support (details in commit) and patch 4 allows devmap bpf prog execution before generic_xdp_tx is called. Patch 5 just updates a couple of selftests to adapt to changes in behavior (in that specifying devmap/cpumap prog fd in generic mode is now allowed). Changelog: ---------- v5 -> v6 v5: https://lore.kernel.org/bpf/20210701002759.381983-1-memxor@gmail.com * Put rcpu->prog check before RCU-bh section to avoid do_softirq (Jesper) v4 -> v5 v4: https://lore.kernel.org/bpf/20210628114746.129669-1-memxor@gmail.com * Add comments and examples for new bitops macros (Alexei) v3 -> v4 v3: https://lore.kernel.org/bpf/20210622202835.1151230-1-memxor@gmail.com * Add detach now that attach of XDP program succeeds (Toke) * Clean up the test to use new ASSERT macros v2 -> v3 v2: https://lore.kernel.org/bpf/20210622195527.1110497-1-memxor@gmail.com * list_for_each_entry -> list_for_each_entry_safe (due to deletion of skb) v1 -> v2 v1: https://lore.kernel.org/bpf/20210620233200.855534-1-memxor@gmail.com * Move __ptr_{set,clear,test}_bit to bitops.h (Toke) Also changed argument order to match the bit op they wrap. * Remove map value size checking functions for cpumap/devmap (Toke) * Rework prog run for skb in cpu_map_kthread_run (Toke) * Set skb->dev to dst->dev after devmap prog has run * Don't set xdp rxq that will be overwritten in cpumap prog run ==================== Signed-off-by:
-
Kumar Kartikeya Dwivedi authored
Support for cpumap and devmap entry progs in previous commits means the test needs to be updated for the new semantics. Also take this opportunity to convert it from CHECK macros to the new ASSERT macros. Since xdp_cpumap_attach has no subtest, put the sole test inside the test_xdp_cpumap_attach function. Signed-off-by:
Kumar Kartikeya Dwivedi <memxor@gmail.com> Signed-off-by:
-
