- 12 Dec, 2013 8 commits
-
-
Paul Durrant authored
There is a mistake in checking the gso_prefix mask when passing large packets to a guest. The wrong shift is applied to the bit - the raw skb gso type is used rather then the translated one. This leads to large packets being handed to the guest without the GSO metadata. This patch fixes the check. The mistake manifested as errors whilst running Microsoft HCK large packet offload tests between a pair of Windows 8 VMs. I have verified this patch fixes those errors. Signed-off-by:
Paul Durrant <paul.durrant@citrix.com> Cc: Wei Liu <wei.liu2@citrix.com> Cc: Ian Campbell <ian.campbell@citrix.com> Cc: David Vrabel <david.vrabel@citrix.com> Acked-by:
Ian Campbell <ian.campbell@citrix.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Sebastian Siewior authored
neigh_priv_len is defined as u8. With all debug enabled struct ipoib_neigh has 200 bytes. The largest part is sk_buff_head with 96 bytes and here the spinlock with 72 bytes. The size value still fits in this u8 leaving some room for more. On -RT struct ipoib_neigh put on weight and has 392 bytes. The main reason is sk_buff_head with 288 and the fatty here is spinlock with 192 bytes. This does no longer fit into into neigh_priv_len and gcc complains. This patch changes neigh_priv_len from being 8bit to 16bit. Since the following element (dev_id) is 16bit followed by a spinlock which is aligned, the struct remains with a total size of 3200 (allmodconfig) / 2048 (with as much debug off as possible) bytes on x86-64. On x86-32 the struct is 1856 (allmodconfig) / 1216 (with as much debug off as possible) bytes long. The numbers were gained with and without the patch to prove that this change does not increase the size of the struct. Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by:
-
Mugunthan V N authored
When CPSW and Davinci MDIO are build as modules, CPSW crashes when accessing CPSW registers in CPSW probe. The same is working in built-in as the CPSW clocks are enabled in Davindi MDIO probe, SO Enabling the clocks before accessing the version register and moving out the other register access to cpsw device open. Signed-off-by:
Mugunthan V N <mugunthanvnm@ti.com> Signed-off-by:
Felipe Balbi <balbi@ti.com> Signed-off-by:
-
Paul Durrant authored
This patch changes the RING_FINAL_CHECK_FOR_REQUESTS in xenvif_build_tx_gops to a check for RING_HAS_UNCONSUMED_REQUESTS as the former call has the side effect of advancing the ring event pointer and therefore inviting another interrupt from the frontend before the napi poll has actually finished, thereby defeating the point of napi. The event pointer is updated by RING_FINAL_CHECK_FOR_REQUESTS in xenvif_poll, the napi poll function, if the work done is less than the budget i.e. when actually transitioning back to interrupt mode. Reported-by:
Malcolm Crossley <malcolm.crossley@citrix.com> Signed-off-by:
-
Paul Durrant authored
netback seems to be somewhat confused about the napi budget parameter. The parameter is supposed to limit the number of skbs processed in each poll, but netback has this confused with grant operations. This patch fixes that, properly limiting the work done in each poll. Note that this limit makes sure we do not process any more data from the shared ring than we intend to pass back from the poll. This is important to prevent tx_queue potentially growing without bound. Signed-off-by:
-
Yang Yingliang authored
It's doing a 64-bit divide which is not supported on 32-bit architectures in psched_ns_t2l(). The correct way to do this is to use do_div(). It's introduced by commit cc106e44 ("net: sched: tbf: fix the calculation of max_size") Reported-by:
kbuild test robot <fengguang.wu@intel.com> Signed-off-by:
Yang Yingliang <yangyingliang@huawei.com> Signed-off-by:
-
Eric Dumazet authored
Unlike TCP, UDP input path does not hold the socket lock. Before messing with sk->sk_rx_dst, we must use a spinlock, otherwise multiple cpus could leak a refcount. This patch also takes care of renewing a stale dst entry. (When the sk->sk_rx_dst would not be used by IP early demux) Fixes: 421b3885 ("udp: ipv4: Add udp early demux") Signed-off-by:
Eric Dumazet <edumazet@google.com> Cc: Shawn Bohrer <sbohrer@rgmadvisors.com> Signed-off-by:
-
Philippe De Muyter authored
commit 03191656 worked around errata ERR006358, but comment contains duplicated lines, impairing the readability. Remove them. Signed-off-by:
Philippe De Muyter <phdm@macqel.be> Signed-off-by:
-
- 11 Dec, 2013 29 commits
-
-
David S. Miller authored
This reverts commit 99023e90. Accidently checked this into 'net' instead of 'net-next'. Signed-off-by:
-
Matthew Whitehead authored
Removed the shared ei_debug variable. Replaced it by adding u32 msg_enable to the private struct ei_device. Now each 8390 ethernet instance has a per-device logging variable. Changed older style printk() calls to more canonical forms. Tested on: ne, ne2k-pci, smc-ultra, and wd hardware. V4.0 - Substituted pr_info() and pr_debug() for printk() KERN_INFO and KERN_DEBUG V3.0 - Checked for cases where pr_cont() was most appropriate choice. - Changed module parameter from 'debug' to 'msg_enable' because debug was no longer the best description. V2.0 - Changed netif_msg_(drv|probe|ifdown|rx_err|tx_err|tx_queued|intr|rx_status|hw) to netif_(dbg|info|warn|err) where possible. Signed-off-by:
Matthew Whitehead <tedheadster@gmail.com> Signed-off-by:
-
Paul Durrant authored
skb_partial_csum_set requires that the linear area of the skb covers the checksum field. The checksum setup code in netback was only doing that pullup in the case when the pseudo header checksum was being recalculated though. This patch makes that pullup unconditional. (I pullup the whole transport header just for simplicity; the requirement is only for the check field but in the case of UDP this is the last field in the header and in the case of TCP it's the last but one). The lack of pullup manifested as failures running Microsoft HCK network tests on a pair of Windows 8 VMs and it has been verified that this patch fixes the problem. Suggested-by:
Jan Beulich <jbeulich@suse.com> Signed-off-by:
-
Tony Lindgren authored
Commit 89ce376c (drivers/net: Use of_match_ptr() macro in smc91x.c) added minimal device tree support to smc91x, but it's not working on many platforms because of the lack of some key configuration bits. Fix the issue by parsing the necessary configuration like the smc911x driver is doing. As most smc91x users seem to use 16-bit access, let's default to that if no reg-io-width is specified. Cc: Nicolas Pitre <nico@fluxnic.net> Cc: Mark Rutland <mark.rutland@arm.com> Cc: netdev@vger.kernel.org Cc: devicetree@vger.kernel.org Acked-by:
Nishanth Menon <nm@ti.com> Signed-off-by:
Tony Lindgren <tony@atomide.com> Signed-off-by:
-
Eric Dumazet authored
pskb_may_pull() can reallocate skb->head, we need to move the initialization of iph and uh pointers after its call. Fixes: 421b3885 ("udp: ipv4: Add udp early demux") Signed-off-by:
-
Jason Wang authored
macvtap_put_user() never return a value grater than iov length, this in fact bypasses the truncated checking in macvtap_recvmsg(). Fix this by always returning the size of packet plus the possible vlan header to let the trunca checking work. Cc: Vlad Yasevich <vyasevich@gmail.com> Cc: Zhi Yong Wu <wuzhy@linux.vnet.ibm.com> Cc: Michael S. Tsirkin <mst@redhat.com> Signed-off-by:
Jason Wang <jasowang@redhat.com> Acked-by:
Vlad Yasevich <vyasevich@gmail.com> Acked-by:
Michael S. Tsirkin <mst@redhat.com> Signed-off-by:
-
Jason Wang authored
Commit 6680ec68 (tuntap: hardware vlan tx support) breaks the truncated packet signal by nev return a length greater than iov length in tun_put_user(). This patch fixes by always return the length of packet plus possible vlan header. Caller can detect the truncated packet by comparing the return value and the size of io length. Cc: Zhi Yong Wu <wuzhy@linux.vnet.ibm.com> Cc: Michael S. Tsirkin <mst@redhat.com> Signed-off-by:
-
Yang Yingliang authored
Now, 32bit rates may be not the true rate. So use rate_bytes_ps which is from max(rate32, rate64) to calcualte quantum. Signed-off-by:
-
Yang Yingliang authored
Current max_size is caluated from rate table. Now, the rate table has been replaced and it's wrong to caculate max_size based on this rate table. It can lead wrong calculation of max_size. The burst in kernel may be lower than user asked, because burst may gets some loss when transform it to buffer(E.g. "burst 40kb rate 30mbit/s") and it seems we cannot avoid this loss. Burst's value(max_size) based on rate table may be equal user asked. If a packet's length is max_size, this packet will be stalled in tbf_dequeue() because its length is above the burst in kernel so that it cannot get enough tokens. The max_size guards against enqueuing packet sizes above q->buffer "time" in tbf_enqueue(). To make consistent with the calculation of tokens, this patch add a helper psched_ns_t2l() to calculate burst(max_size) directly to fix this problem. After this fix, we can support to using 64bit rates to calculate burst as well. Signed-off-by:
-
Sergei Shtylyov authored
Renesas R-Car development boards use KSZ8041RNLI PHY which for some reason has ID of 0x00221537 that is not documented for KSZ8041-family PHYs and does not match the documented ID of 0x0022151x (where 'x' is the revision). We have to add the new #define PHY_ID_* and new ksphy_driver[] entry, almost the same as KSZ8041 one, differing only in the 'phy_id' and 'name' fields. Signed-off-by:
Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Tested-by:
Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wirelessDavid S. Miller authored
John W. Linville says: ==================== Just one patch this time -- a fix from Felix Fietkau to fix the duration calculation for non-aggregated packets in ath9k. This is a small change and it is obviously specific to ath9k. Please let me know if there are problems! ==================== Signed-off-by: -
John W. Linville authored
Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless into for-davem
-
Eric Dumazet authored
Dave Jones reported a use after free in UDP stack : [ 5059.434216] ========================= [ 5059.434314] [ BUG: held lock freed! ] [ 5059.434420] 3.13.0-rc3+ #9 Not tainted [ 5059.434520] ------------------------- [ 5059.434620] named/863 is freeing memory ffff88005e960000-ffff88005e96061f, with a lock still held there! [ 5059.434815] (slock-AF_INET){+.-...}, at: [<ffffffff8149bd21>] udp_queue_rcv_skb+0xd1/0x4b0 [ 5059.435012] 3 locks held by named/863: [ 5059.435086] #0: (rcu_read_lock){.+.+..}, at: [<ffffffff8143054d>] __netif_receive_skb_core+0x11d/0x940 [ 5059.435295] #1: (rcu_read_lock){.+.+..}, at: [<ffffffff81467a5e>] ip_local_deliver_finish+0x3e/0x410 [ 5059.435500] #2: (slock-AF_INET){+.-...}, at: [<ffffffff8149bd21>] udp_queue_rcv_skb+0xd1/0x4b0 [ 5059.435734] stack backtrace: [ 5059.435858] CPU: 0 PID: 863 Comm: named Not tainted 3.13.0-rc3+ #9 [loadavg: 0.21 0.06 0.06 1/115 1365] [ 5059.436052] Hardware name: /D510MO, BIOS MOPNV10J.86A.0175.2010.0308.0620 03/08/2010 [ 5059.436223] 0000000000000002 ffff88007e203ad8 ffffffff8153a372 ffff8800677130e0 [ 5059.436390] ffff88007e203b10 ffffffff8108cafa ffff88005e960000 ffff88007b00cfc0 [ 5059.436554] ffffea00017a5800 ffffffff8141c490 0000000000000246 ffff88007e203b48 [ 5059.436718] Call Trace: [ 5059.436769] <IRQ> [<ffffffff8153a372>] dump_stack+0x4d/0x66 [ 5059.436904] [<ffffffff8108cafa>] debug_check_no_locks_freed+0x15a/0x160 [ 5059.437037] [<ffffffff8141c490>] ? __sk_free+0x110/0x230 [ 5059.437147] [<ffffffff8112da2a>] kmem_cache_free+0x6a/0x150 [ 5059.437260] [<ffffffff8141c490>] __sk_free+0x110/0x230 [ 5059.437364] [<ffffffff8141c5c9>] sk_free+0x19/0x20 [ 5059.437463] [<ffffffff8141cb25>] sock_edemux+0x25/0x40 [ 5059.437567] [<ffffffff8141c181>] sock_queue_rcv_skb+0x81/0x280 [ 5059.437685] [<ffffffff8149bd21>] ? udp_queue_rcv_skb+0xd1/0x4b0 [ 5059.437805] [<ffffffff81499c82>] __udp_queue_rcv_skb+0x42/0x240 [ 5059.437925] [<ffffffff81541d25>] ? _raw_spin_lock+0x65/0x70 [ 5059.438038] [<ffffffff8149bebb>] udp_queue_rcv_skb+0x26b/0x4b0 [ 5059.438155] [<ffffffff8149c712>] __udp4_lib_rcv+0x152/0xb00 [ 5059.438269] [<ffffffff8149d7f5>] udp_rcv+0x15/0x20 [ 5059.438367] [<ffffffff81467b2f>] ip_local_deliver_finish+0x10f/0x410 [ 5059.438492] [<ffffffff81467a5e>] ? ip_local_deliver_finish+0x3e/0x410 [ 5059.438621] [<ffffffff81468653>] ip_local_deliver+0x43/0x80 [ 5059.438733] [<ffffffff81467f70>] ip_rcv_finish+0x140/0x5a0 [ 5059.438843] [<ffffffff81468926>] ip_rcv+0x296/0x3f0 [ 5059.438945] [<ffffffff81430b72>] __netif_receive_skb_core+0x742/0x940 [ 5059.439074] [<ffffffff8143054d>] ? __netif_receive_skb_core+0x11d/0x940 [ 5059.442231] [<ffffffff8108c81d>] ? trace_hardirqs_on+0xd/0x10 [ 5059.442231] [<ffffffff81430d83>] __netif_receive_skb+0x13/0x60 [ 5059.442231] [<ffffffff81431c1e>] netif_receive_skb+0x1e/0x1f0 [ 5059.442231] [<ffffffff814334e0>] napi_gro_receive+0x70/0xa0 [ 5059.442231] [<ffffffffa01de426>] rtl8169_poll+0x166/0x700 [r8169] [ 5059.442231] [<ffffffff81432bc9>] net_rx_action+0x129/0x1e0 [ 5059.442231] [<ffffffff810478cd>] __do_softirq+0xed/0x240 [ 5059.442231] [<ffffffff81047e25>] irq_exit+0x125/0x140 [ 5059.442231] [<ffffffff81004241>] do_IRQ+0x51/0xc0 [ 5059.442231] [<ffffffff81542bef>] common_interrupt+0x6f/0x6f We need to keep a reference on the socket, by using skb_steal_sock() at the right place. Note that another patch is needed to fix a race in udp_sk_rx_dst_set(), as we hold no lock protecting the dst. Fixes: 421b3885 ("udp: ipv4: Add udp early demux") Reported-by:Dave Jones <davej@redhat.com> Signed-off-by:
-
David S. Miller authored
Wang Weidong says: ==================== sctp: check the rto_min and rto_max v6 -> v7: -patch2: fix the whitespace issues which pointed out by Daniel v5 -> v6: split the v5' first patch to patch1 and patch2, and remove the macro in constants.h -patch1: do rto_min/max socket option handling in its own patch, and fix the check of rto_min/max. -patch2: do rto_min/max sysctl handling in its own patch. -patch3: add Suggested-by Daniel. v4 -> v5: - patch1: add marco in constants.h and fix up spacing as suggested by Daniel - patch2: add a patch for fix up do_hmac_alg for according to do_rto_min[max] v3 -> v4: -patch1: fix use init_net directly which suggested by Vlad. v2 -> v3: -patch1: add proc_handler for check rto_min and rto_max which suggested by Vlad v1 -> v2: -patch1: fix the From Name which pointed out by David, and add the ACK by Neil ==================== Signed-off-by: -
wangweidong authored
fix up spacing of proc_sctp_do_hmac_alg for according to the proc_sctp_do_rto_min[max] in sysctl.c Suggested-by:
Daniel Borkmann <dborkman@redhat.com> Signed-off-by:
Wang Weidong <wangweidong1@huawei.com> Acked-by:
-
wangweidong authored
rto_min should be smaller than rto_max while rto_max should be larger than rto_min. Add two proc_handler for the checking. Suggested-by:
-
wangweidong authored
When we set 0 to rto_min or rto_max, just not change the value. Also we should check the rto_min > rto_max. Suggested-by:
-
Florent Fourcot authored
This patch is following b579035f "ipv6: remove old conditions on flow label sharing" Since there is no reason to restrict a label to a destination, we should not erase the destination value of a socket with the value contained in the flow label storage. This patch allows to really have the same flow label to more than one destination. Signed-off-by:
Florent Fourcot <florent.fourcot@enst-bretagne.fr> Reviewed-by:
Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by:
-
Neil Horman authored
Currently, sctp associations latch a sockets autoclose value to an association at association init time, subject to capping constraints from the max_autoclose sysctl value. This leads to an odd situation where an application may set a socket level autoclose timeout, but sliently sctp will limit the autoclose timeout to something less than that. Fix this by modifying the autoclose setsockopt function to check the limit, cap it and warn the user via syslog that the timeout is capped. This will allow getsockopt to return valid autoclose timeout values that reflect what subsequent associations actually use. While were at it, also elimintate the assoc->autoclose variable, it duplicates whats in the timeout array, which leads to multiple sources for the same information, that may differ (as the former isn't subject to any capping). This gives us the timeout information in a canonical place and saves some space in the association structure as well. Signed-off-by:
Neil Horman <nhorman@tuxdriver.com> Acked-by:
-
David S. Miller authored
Jon Maloy says: ==================== tipc: corrections related to tasklet job mechanism These commits correct two bugs related to tipc' service for launching functions for asynchronous execution in a separate tasklet. ==================== Signed-off-by: -
Ying Xue authored
'handler_enabled' is a global flag indicating whether the TIPC signal handling service is enabled or not. The lack of lock protection for this flag incurs a risk for contention, so that a tipc_k_signal() call might queue a signal handler to a destroyed signal queue, with unpredictable results. To correct this, we let the already existing 'qitem_lock' protect the flag, as it already does with the queue itself. This way, we ensure that the flag always is consistent across all cores. Signed-off-by:
Ying Xue <ying.xue@windriver.com> Reviewed-by:
Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by:
Jon Maloy <jon.maloy@ericsson.com> Signed-off-by:
-
Jon Paul Maloy authored
The 'signal handler' service in TIPC is a mechanism that makes it possible to postpone execution of functions, by launcing them into a job queue for execution in a separate tasklet, independent of the launching execution thread. When we do rmmod on the tipc module, this service is stopped after the network service. At the same time, the stopping of the network service may itself launch jobs for execution, with the risk that these functions may be scheduled for execution after the data structures meant to be accessed by the job have already been deleted. We have seen this happen, most often resulting in an oops. This commit ensures that the signal handler is the very first to be stopped when TIPC is shut down, so there are no surprises during the cleanup of the other services. Signed-off-by:
-
Nat Gurumoorthy authored
The new tg3 driver leaves REG_BASE_ADDR (PCI config offset 120) uninitialized. From power on reset this register may have garbage in it. The Register Base Address register defines the device local address of a register. The data pointed to by this location is read or written using the Register Data register (PCI config offset 128). When REG_BASE_ADDR has garbage any read or write of Register Data Register (PCI 128) will cause the PCI bus to lock up. The TCO watchdog will fire and bring down the system. Signed-off-by:
Nat Gurumoorthy <natg@google.com> Acked-by:
Michael Chan <mchan@broadcom.com> Signed-off-by:
-
David S. Miller authored
Jason Wang and Michael S. Tsirkin are still discussing how to properly fix this. Signed-off-by: -
Jason Wang authored
macvtap_put_user() never return a value grater than iov length, this in fact bypasses the truncated checking in macvtap_recvmsg(). Fix this by always returning the size of packet plus the possible vlan header to let the truncated checking work. Cc: Vlad Yasevich <vyasevich@gmail.com> Cc: Zhi Yong Wu <wuzhy@linux.vnet.ibm.com> Signed-off-by:
-
Jason Wang authored
Commit 6680ec68 (tuntap: hardware vlan tx support) breaks the truncated packet signal by never return a length greater than iov length in tun_put_user(). This patch fixes this by always return the length of packet plus possible vlan header. Caller can detect the truncated packet by comparing the return value and the size of iov length. Reported-by:
-
Fan Du authored
Otherwise causing dst memory leakage. Have Checked all other type tunnel device transmit implementation, no such things happens anymore. Signed-off-by:
Fan Du <fan.du@windriver.com> Acked-by:
-
Sasha Levin authored
unix_dgram_recvmsg() will hold the readlock of the socket until recv is complete. In the same time, we may try to setsockopt(SO_PEEK_OFF) which will hang until unix_dgram_recvmsg() will complete (which can take a while) without allowing us to break out of it, triggering a hung task spew. Instead, allow set_peek_off to fail, this way userspace will not hang. Signed-off-by:
Sasha Levin <sasha.levin@oracle.com> Acked-by:
Pavel Emelyanov <xemul@parallels.com> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/bwh/sfcDavid S. Miller authored
Ben Hutchings says: ==================== Several fixes for the PTP hardware support added in 3.7: 1. Fix filtering of PTP packets on the TX path to be robust against bad header lengths. 2. Limit logging on the RX path in case of a PTP packet flood, partly from Laurence Evans. 3. Disable PTP hardware when the interface is down so that we don't receive RX timestamp events, from Alexandre Rames. 4. Maintain clock frequency adjustment when a time offset is applied. Also fixes for the SFC9100 family support added in 3.12: 5. Take the RX prefix length into account when applying NET_IP_ALIGN, from Andrew Rybchenko. 6. Work around a bug that breaks communication between the driver and firmware, from Robert Stonehouse. Please also queue these up for the appropriate stable branches. ==================== Signed-off-by:
-
- 10 Dec, 2013 3 commits
-
-
Maxime Ripard authored
The sun4i-emac driver uses devm_request_irq at .ndo_open time, but relies on the managed device mechanism to actually free it. This causes an issue whenever someone wants to restart the interface, the interrupt still being held, and not yet released. Fall back to using the regular request_irq at .ndo_open time, and introduce a free_irq during .ndo_stop. Signed-off-by:
Maxime Ripard <maxime.ripard@free-electrons.com> Cc: stable@vger.kernel.org # 3.11+ Signed-off-by:
-
Stefan Tomanek authored
This changes ensures that the routing entry investigated by the suppress function actually does point to a device struct before following that pointer, fixing a possible kernel oops situation when verifying the interface group associated with a routing table entry. According to Daniel Golle, this Oops can be triggered by a user process trying to establish an outgoing IPv6 connection while having no real IPv6 connectivity set up (only autoassigned link-local addresses). Fixes: 6ef94cfa ("fib_rules: add route suppression based on ifgroup") Reported-by:
Daniel Golle <daniel.golle@gmail.com> Tested-by:
Stefan Tomanek <stefan.tomanek@wertarbyte.de> Signed-off-by:
-
Changli Gao authored
maxattr in genl_family should be used to save the max attribute type, but not the max command type. Drop monitor doesn't support any attributes, so we should leave it as zero. Signed-off-by:
-
