Bump MIN version to reflect support of new platform (AC5X family devices).
Signed-off-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add support for the following AC5x Marvell Prestera PP family devices:
  98DX7312M (12x25G / 8x25G + 1x100G);
  98DX3500  (24x1G + 6x25G);
  98DX3501  (16x1G + 6x10G);
  98DX3510  (48x1G + 6x25G);
  98DX3520  (24x2.5G + 6x25G);

Known issues:
- FW reload doesn't work (rmmod/modprobe sequence).
Co-developed-by: Vadym Kochan <vadym.kochan@plvision.eu>
Signed-off-by: Vadym Kochan <vadym.kochan@plvision.eu>
Signed-off-by: Maksym Glubokiy <maksym.glubokiy@plvision.eu>
Signed-off-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu>
Signed-off-by: David S. Miller <davem@davemloft.net>

Use defines with proper device names instead of device-id in pci-devices
listing.
Signed-off-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu>
Signed-off-by: David S. Miller <davem@davemloft.net>

Horatiu Vultur says:

====================
net: lan966x: Add xdp support

Add support for xdp in lan966x driver. Currently only XDP_PASS and
XDP_DROP are supported.

The first 2 patches are just moving things around just to simplify
the code for when the xdp is added.
Patch 3 actually adds the xdp. Currently the only supported actions
are XDP_PASS and XDP_DROP. In the future this will be extended with
XDP_TX and XDP_REDIRECT.
Patch 4 changes to use page pool API, because the handling of the
pages is similar with what already lan966x driver is doing. In this
way is possible to remove some of the code.

All these changes give a small improvement on the RX side:
Before:
iperf3 -c 10.96.10.1 -R
[  5]   0.00-10.01  sec   514 MBytes   430 Mbits/sec    0         sender
[  5]   0.00-10.00  sec   509 MBytes   427 Mbits/sec              receiver

After:
iperf3 -c 10.96.10.1 -R
[  5]   0.00-10.02  sec   540 MBytes   452 Mbits/sec    0         sender
[  5]   0.00-10.01  sec   537 MBytes   450 Mbits/sec              receiver

---
v2->v3:
- inline lan966x_xdp_port_present
- update max_len of page_pool_params not to be the page size anymore but
  actually be rx->max_mtu.

v1->v2:
- rebase on net-next, once the fixes for FDMA and MTU were accepted
- drop patch 2, which changes the MTU as is not needed anymore
- allow to run xdp programs on frames bigger than 4KB
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Use the page_pool API for allocation, freeing and DMA handling instead
of dev_alloc_pages, __free_pages and dma_map_page.
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Introduce basic XDP support to lan966x driver. Currently the driver
supports only the actions XDP_PASS, XDP_DROP and XDP_ABORTED.
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The function lan966x_fdma_rx_get_frame was unmapping the frame from
device and check also if the frame was received on a valid port. And
only after that it tried to generate the skb.
Move this check in a different function, in preparation for xdp
support. Such that xdp to be added here and the
lan966x_fdma_rx_get_frame to be used only when giving the skb to upper
layers.
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The total length of IFH(inter frame header) in bytes is calculated as
IFH_LEN * sizeof(u32). Because IFH_LEN describes the length in words
and not in bytes. As the length of IFH in bytes is used quite often,
add a define for this. This is just to simplify the things.
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Set irq affinity to cpus that belong to the same numa node with
NIC device first.
Signed-off-by: Yinjun Zhang <yinjun.zhang@corigine.com>
Reviewed-by: Louis Peens <louis.peens@corigine.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@corigine.com>
Signed-off-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Steen Hegelund says:

====================
Extend TC key support for Sparx5 IS2 VCAP

This provides extended tc flower filter key support for the Sparx5 VCAP
functionality.

It builds on top of the initial IS2 VCAP support found in this series:

https://lore.kernel.org/all/20221020130904.1215072-1-steen.hegelund@microchip.com/

Overview:
=========

The added flower filter key (dissector) support is this:

- ipv4_addr (sip and dip)
- ipv6_addr (sip and dip)
- control (IPv4 fragments)
- portnum (tcp and udp port numbers)
- basic (L3 and L4 protocol)
- vlan (outer vlan tag info)
- tcp (tcp flags)
- ip (tos field)

The IS2 VCAP supports classified VLAN information which amounts to the
outer VLAN info in case of multiple tags.

Functionality:
==============

Before frames can match IS2 VCAP rules with e.g an IPv4 source address, the
IS2 VCAPs keyset configuration must include keyset that contains a IPv4
source address and this must be configured for the lookup/port/traffic-type
that you want to match on.

The Sparx5 IS2 VCAP has the following traffic types:

- Non-Ethernet frames
- IPv4 Unicast frames
- IPv4 Multicast frames
- IPv6 Unicast frames
- IPv6 Multicast frames
- ARP frames

So to cover IPv4 traffic the two IPv4 categories must be configured with a
keyset that contains IPv4 address information such as the
VCAP_KFS_IP4_TCP_UDP keyset.

The IPv4 and IPv6 traffic types are configured with useful default keysets,
in later series we will use the tc template functionality when we want to
change these defaults.

The flower filter must contain a goto action as its last action and the
chain id must specify the chain id of the next lookup in a VCAP or a
destination outside the VCAP ranges.

To activate the VCAP lookups on a port you must add a TC matchall filter on
the port containing a single goto action that points to the chain id of the
first lookup in the IS2 VCAP.

From then on frames arriving on this port will be matched against the
rules in the IS2 VCAP lookups.

Removing the matchall filter will deactivate the IS2 lookups, but will
leave the VCAP rules in the memory of the VCAP instance, and from then in
frames will no longer be matched against the rules the in IS2 VCAP.

If the matchall rule is added back again the IS2 rules will be active
once more.

Delivery:
=========

This is current plan for delivering the full VCAP feature set of Sparx5:

- TC flower filter statistics and rule order by size and priority
- debugfs support for inspecting rules
- support for TC protocol all
- Sparx5 IS0 VCAP support
- add TC policer and drop action support (depends on the Sparx5 QoS support
  upstreamed separately)
- Sparx5 ES0 VCAP support
- TC flower template support
- TC matchall filter support for mirroring and policing ports
- TC flower filter mirror action support
- Sparx5 ES2 VCAP support

Version History:
================
v6      Rebased on the latest next-next master branch.
        No other implementation changes.

v5      Add support for a TC matchall filter with a single goto action
        which will activate the lookups of the VCAP.  Removing this filter
        will deactivate the VCAP lookups again.

v4      Add support for TC flower filter goto action and a check of the
        actions: check action combinations and the goto chain id.

v3      Add some more details to the explanation in the commit message
        about support for MAC_ETYPE keysets and "protocol all" as well as
        the classified VLAN information.  This is done to help testing the
        feature.
        No implementation changes in this version.

v2      Split one of the KUNIT tests into 3 tests to fix a kernel robot
        build warning.

v1      Initial version
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

This tests that the available keyfield and actionfield add methods are
doing the exepected work: adding the value (and mask) to the
keyfield/actionfield list item in the rule.

The test also covers the functionality that matches a rule to a keyset.
Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Use a tc matchall rule with a goto action to the VCAP specific chain to
enable the VCAP lookups.
If the matchall rule is removed the VCAP lookups will be disabled
again using its cookie as lookup to find the VCAP instance.

To enable the Sparx5 IS2 VCAP on eth0 you would use this command:

    tc filter add dev eth0 ingress prio 5 handle 5 matchall \
        skip_sw action goto chain 8000000

as the first lookup in IS2 has chain id 8000000
Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add support for validating keyfields and actionfields when they are added
to a VCAP rule.
We need to ensure that the field is not already present and that the field
is in the key- or actionset, if the client has added a key- or actionset to
the rule at this point.
Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This tries to match the keys in a rule with the keysets supported by the
VCAP instance, and generate a list of keysets.

This list is then validated against the list of keysets that is currently
selected for the lookups (per port) in the VCAP configuration.

The Sparx5 IS2 only has one actionset, so there is no actionset matching
performed for now.
Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add support for a goto action and ensure that a HW offloaded TC flower
filter has a valid goto action and that pass and trap actions are not both
used in the same filter.
Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add a helper function that finds the lookup index in a VCAP instance from
the chain id.
Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This adds the following TC flower filter keys to Sparx5 for IS2:

- ipv4_addr (sip and dip)
- ipv6_addr (sip and dip)
- control (IPv4 fragments)
- portnum (tcp and udp port numbers)
- basic (L3 and L4 protocol)
- vlan (outer vlan tag info)
- tcp (tcp flags)
- ip (tos field)

as well as an 128 bit keyfield interface on the VCAP API to set the IPv6
addresses.

IS2 supports the classified VLAN information which amounts to the outer
VLAN info in case of multiple tags.

Here are some examples of the tc flower filter operations that are now
supported for the IS2 VCAP:

- IPv4 Addresses
    tc filter add dev eth12 ingress chain 8000000 prio 12 handle 12 \
        protocol ip flower skip_sw dst_ip 1.0.1.1 src_ip 2.0.2.2    \
        action trap action goto chain 81000000

- IPv6 Addresses
    tc filter add dev eth12 ingress chain 8000000 prio 13 handle 13 \
        protocol ipv6 flower skip_sw dst_ip 1::1:1 src_ip 2::2:2    \
        action trap action goto chain 81000000

- IPv4 fragments
    tc filter add dev eth12 ingress chain 8000000 prio 14 handle 14 \
        protocol ip flower skip_sw dst_ip 3.0.3.3 src_ip 2.0.2.2    \
        ip_flags frag/nofirstfrag action trap action goto chain 81000000

- TCP and UDP portnumbers
    tc filter add dev eth12 ingress chain 8000000 prio 21 handle 21 \
        protocol ip flower skip_sw dst_ip 8.8.8.8 src_ip 2.0.2.2    \
        ip_proto tcp dst_port 100 src_port 12000 action trap action goto
        chain 81000000
    tc filter add dev eth12 ingress chain 8000000 prio 23 handle 23 \
        protocol ipv6 flower skip_sw dst_ip 5::5:5 src_ip 2::2:2    \
        ip_proto tcp dst_port 300 src_port 13000 action trap action goto
        chain 81000000

- Layer 3 and Layer 4 protocol info
    tc filter add dev eth12 ingress chain 8000000 prio 28 handle 28 \
        protocol ipv4 flower skip_sw dst_ip 9.0.9.9 src_ip 2.0.2.2  \
        ip_proto icmp action trap action goto chain 81000000

- VLAN tag info (outer tag)
    tc filter add dev eth12 ingress chain 8000000 prio 29 handle 29 \
        protocol 802.1q flower skip_sw vlan_id 600 vlan_prio 6      \
        vlan_ethtype ipv4 action trap action goto chain 81000000
    tc filter add dev eth12 ingress chain 8000000 prio 31 handle 31 \
        protocol 802.1q flower skip_sw vlan_id 600 vlan_prio 5      \
        vlan_ethtype ipv6 action trap action goto chain 81000000

- TCP flags
    tc filter add dev eth12 ingress chain 8000000 prio 15 handle 15 \
        protocol ip flower skip_sw dst_ip 4.0.4.4 src_ip 2.0.2.2    \
        ip_proto tcp tcp_flags 0x2a/0x3f action trap action goto chain
        81000000

- IP info (IPv4 TOS field)
    tc filter add dev eth12 ingress chain 8000000 prio 16 handle 16 \
        protocol ip flower skip_sw ip_tos 0x35 dst_ip 5.0.5.5       \
        src_ip 2.0.2.2 action trap action goto chain 81000000

Notes:
- The "protocol all" selection is not supported yet.

- The MAC address rule now needs to use non-ip and non "protocol all". Here
  is an example:

   tc filter add dev eth12 ingress chain 8000000 prio 10 handle 10 \
         protocol 0xbeef flower skip_sw \
         dst_mac 0a:0b:0c:0d:0e:0f \
         src_mac 2:0:0:0:0:1 \
         action trap action goto chain 81000000

- The VLAN rules use classified VLAN information, and to get the
  classification information into the frame metadata, the ingress port need
  to be added to a bridge with the VID and vlan filtering enabled, like
  this (using VID 600 and four ports eth12, eth13, eth14 and eth15):

    ip link add name br5 type bridge
    ip link set dev br5 up
    ip link set eth12 master br5
    ip link set eth13 master br5
    ip link set eth14 master br5
    ip link set eth15 master br5
    sysctl -w net.ipv6.conf.eth12.disable_ipv6=1
    sysctl -w net.ipv6.conf.eth13.disable_ipv6=1
    sysctl -w net.ipv6.conf.eth14.disable_ipv6=1
    sysctl -w net.ipv6.conf.eth15.disable_ipv6=1
    sysctl -w net.ipv6.conf.br5.disable_ipv6=1
    ip link set dev br5 type bridge vlan_filtering 1
    bridge vlan add dev eth12 vid 600
    bridge vlan add dev eth13 vid 600
    bridge vlan add dev eth14 vid 600
    bridge vlan add dev eth15 vid 600
    bridge vlan add dev br5 vid 600 self
Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com>
Tested-by: Casper Andersson <casper.casan@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This changes the port keyset configuration for Sparx5 IS2 so that

- IPv4 generates a IP4_TCP_UDP keyset for IPv4 TCP/UDP frames and a
  IP4_OTHER keyset for other IPv4 frames (both UC and MC)
- IPv6 generates a IP_7TUPLE keyset (both UC and MC)

ARP and non-IP traffic continues to generate the MAC_ETYPE keyset
Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Lorenzo Bianconi says:

====================
introduce WED RX support to MT7986 SoC

Similar to TX counterpart available on MT7622 and MT7986, introduce
RX Wireless Ethernet Dispatch available on MT7986 SoC in order to
offload traffic received by wlan nic to the wired interfaces (lan/wan).

Changes since v3:
- remove reset property in ethsys dts node
- rely on readx_poll_timeout in wo mcu code
- fix typos
- move wo-ccif binding in soc folder
- use reserved-memory for wo-dlm
- improve wo-ccif binding

Changes since v2:
- rely on of_reserved_mem APIs in mcu code
- add some dts fixes
- rename {tx,rx}_wdma in {rx,tx}_wdma
- update entry in maintainers file

Changes since v1:
- fix sparse warnings
- rely on memory-region property in mt7622-wed.yaml
- some more binding fixes
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Update MEDIATEK ETHERNET driver maintainer file enty adding myself to
maintainers list
Acked-by: Felix Fietkau <nbd@nbd.name>
Acked-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Introduce WED RX MIB counters support available on MT7986a SoC.
Tested-by: Daniel Golle <daniel@makrotopia.org>
Co-developed-by: Sujuan Chen <sujuan.chen@mediatek.com>
Signed-off-by: Sujuan Chen <sujuan.chen@mediatek.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Enable RX Wireless Ethernet Dispatch available on MT7986 Soc.
Tested-by: Daniel Golle <daniel@makrotopia.org>
Co-developed-by: Sujuan Chen <sujuan.chen@mediatek.com>
Signed-off-by: Sujuan Chen <sujuan.chen@mediatek.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Rename tx_wdma queue array in rx_wdma since this is rx side of wdma soc.
Moreover rename mtk_wed_wdma_ring_setup routine in
mtk_wed_wdma_rx_ring_setup()
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Introduce WO chip support to mtk wed driver. MTK WED WO is used to
implement RX Wireless Ethernet Dispatch and offload traffic received by
wlan nic to the wired interface.
Tested-by: Daniel Golle <daniel@makrotopia.org>
Co-developed-by: Sujuan Chen <sujuan.chen@mediatek.com>
Signed-off-by: Sujuan Chen <sujuan.chen@mediatek.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Introduce WED mcu support used to configure WED WO chip.
This is a preliminary patch in order to add RX Wireless
Ethernet Dispatch available on MT7986 SoC.
Tested-by: Daniel Golle <daniel@makrotopia.org>
Co-developed-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Sujuan Chen <sujuan.chen@mediatek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Document the binding for the RX Wireless Ethernet Dispatch core on the
MT7986 ethernet driver used to offload traffic received by WLAN NIC and
forwarded to LAN/WAN one.
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Similar to TX Wireless Ethernet Dispatch, introduce RX Wireless Ethernet
Dispatch to offload traffic received by the wlan interface to lan/wan
one.
Co-developed-by: Sujuan Chen <sujuan.chen@mediatek.com>
Signed-off-by: Sujuan Chen <sujuan.chen@mediatek.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

HINIC is marked orphan for 14 months from the commit "5cfe5109",
but there are lots of HINIC in use.

I have a SP582 NIC (hi1822 inside which is a kind of HINIC SOC),
and implement based on hinic driver, and if there are some patches
for HINIC, I can test and do some code review.

I'm active in linux contribution, if possible,
I want to take the hinic maintainership.

Add my email here to receive patches.
Signed-off-by: Cai Huoqing <cai.huoqing@linux.dev>
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/can/pch_can.c
  ae64438b ("can: dev: fix skb drop check")
  1dd1b521 ("can: remove obsolete PCH CAN driver")
https://lore.kernel.org/all/20221110102509.1f7d63cc@canb.auug.org.au/Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Pull networking fixes from Jakub Kicinski:
 "Including fixes from netfilter, wifi, can and bpf.

  Current release - new code bugs:

   - can: af_can: can_exit(): add missing dev_remove_pack() of
     canxl_packet

  Previous releases - regressions:

   - bpf, sockmap: fix the sk->sk_forward_alloc warning

   - wifi: mac80211: fix general-protection-fault in
     ieee80211_subif_start_xmit()

   - can: af_can: fix NULL pointer dereference in can_rx_register()

   - can: dev: fix skb drop check, avoid o-o-b access

   - nfnetlink: fix potential dead lock in nfnetlink_rcv_msg()

  Previous releases - always broken:

   - bpf: fix wrong reg type conversion in release_reference()

   - gso: fix panic on frag_list with mixed head alloc types

   - wifi: brcmfmac: fix buffer overflow in brcmf_fweh_event_worker()

   - wifi: mac80211: set TWT Information Frame Disabled bit as 1

   - eth: macsec offload related fixes, make sure to clear the keys from
     memory

   - tun: fix memory leaks in the use of napi_get_frags

   - tun: call napi_schedule_prep() to ensure we own a napi

   - tcp: prohibit TCP_REPAIR_OPTIONS if data was already sent

   - ipv6: addrlabel: fix infoleak when sending struct ifaddrlblmsg to
     network

   - tipc: fix a msg->req tlv length check

   - sctp: clear out_curr if all frag chunks of current msg are pruned,
     avoid list corruption

   - mctp: fix an error handling path in mctp_init(), avoid leaks"

* tag 'net-6.1-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (101 commits)
  eth: sp7021: drop free_netdev() from spl2sw_init_netdev()
  MAINTAINERS: Move Vivien to CREDITS
  net: macvlan: fix memory leaks of macvlan_common_newlink
  ethernet: tundra: free irq when alloc ring failed in tsi108_open()
  net: mv643xx_eth: disable napi when init rxq or txq failed in mv643xx_eth_open()
  ethernet: s2io: disable napi when start nic failed in s2io_card_up()
  net: atlantic: macsec: clear encryption keys from the stack
  net: phy: mscc: macsec: clear encryption keys when freeing a flow
  stmmac: dwmac-loongson: fix missing of_node_put() while module exiting
  stmmac: dwmac-loongson: fix missing pci_disable_device() in loongson_dwmac_probe()
  stmmac: dwmac-loongson: fix missing pci_disable_msi() while module exiting
  cxgb4vf: shut down the adapter when t4vf_update_port_info() failed in cxgb4vf_open()
  mctp: Fix an error handling path in mctp_init()
  stmmac: intel: Update PCH PTP clock rate from 200MHz to 204.8MHz
  net: cxgb3_main: disable napi when bind qsets failed in cxgb_up()
  net: cpsw: disable napi in cpsw_ndo_open()
  iavf: Fix VF driver counting VLAN 0 filters
  ice: Fix spurious interrupt during removal of trusted VF
  net/mlx5e: TC, Fix slab-out-of-bounds in parse_tc_actions
  net/mlx5e: E-Switch, Fix comparing termination table instance
  ...

Saeed Mahameed says:

====================
mlx5 fixes 2022-11-02

This series provides bug fixes to mlx5 driver.

* tag 'mlx5-fixes-2022-11-09' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux:
  net/mlx5e: TC, Fix slab-out-of-bounds in parse_tc_actions
  net/mlx5e: E-Switch, Fix comparing termination table instance
  net/mlx5e: TC, Fix wrong rejection of packet-per-second policing
  net/mlx5e: Fix tc acts array not to be dependent on enum order
  net/mlx5e: Fix usage of DMA sync API
  net/mlx5e: Add missing sanity checks for max TX WQE size
  net/mlx5: fw_reset: Don't try to load device in case PCI isn't working
  net/mlx5: E-switch, Set to legacy mode if failed to change switchdev mode
  net/mlx5: Allow async trigger completion execution on single CPU systems
  net/mlx5: Bridge, verify LAG state when adding bond to bridge
====================

Link: https://lore.kernel.org/r/20221109184050.108379-1-saeed@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Tony Nguyen says:

====================
Intel Wired LAN Driver Updates 2022-11-09 (ice, iavf)

This series contains updates to ice and iavf drivers.

Norbert stops disabling VF queues that are not enabled for ice driver.

Michal stops accounting of VLAN 0 filter to match expectations of PF
driver for iavf.

* '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
  iavf: Fix VF driver counting VLAN 0 filters
  ice: Fix spurious interrupt during removal of trusted VF
====================

Link: https://lore.kernel.org/r/20221110003744.201414-1-anthony.l.nguyen@intel.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

It's not necessary to free netdev allocated with devm_alloc_etherdev()
and using free_netdev() leads to double free.

Fixes: fd3040b9 ("net: ethernet: Add driver for Sunplus SP7021")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Link: https://lore.kernel.org/r/20221109150116.2988194-1-weiyongjun@huaweicloud.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Last patch from Vivien was nearly 3 years ago and he has not reviewed or
responded to DSA patches since then, move to CREDITS.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20221109231907.621678-1-f.fainelli@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Jonathan reports crashes when running net-next in Meta's fleet.
Stats collection uses ethtool -I which does a per-op policy dump
to check if stats are supported. We don't initialize the dumpit
information if doit succeeds due to evaluation short-circuiting.

The crash may look like this:

   BUG: kernel NULL pointer dereference, address: 0000000000000cc0
   RIP: 0010:netlink_policy_dump_add_policy+0x174/0x2a0
     ctrl_dumppolicy_start+0x19f/0x2f0
     genl_start+0xe7/0x140

Or we may trigger a warning:

   WARNING: CPU: 1 PID: 785 at net/netlink/policy.c:87 netlink_policy_dump_get_policy_idx+0x79/0x80
   RIP: 0010:netlink_policy_dump_get_policy_idx+0x79/0x80
     ctrl_dumppolicy_put_op+0x214/0x360

depending on what garbage we pick up from the stack.
Reported-by: Jonathan Lemon <bsd@meta.com>
Fixes: 26588edb ("genetlink: support split policies in ctrl_dumppolicy_put_op()")
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Leon Romanovsky <leonro@nvidia.com>
Link: https://lore.kernel.org/r/20221109183254.554051-1-kuba@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

When a devlink port is unregistered, its type is expected to be unset or
otherwise a WARNING is generated [1]. This was supposed to be handled by
cited commit by clearing the type upon 'NETDEV_PRE_UNINIT'.

The assumption was that no other events can be generated for the netdev
after this event, but this proved to be wrong. After the event is
generated, netdev_wait_allrefs_any() will rebroadcast a
'NETDEV_UNREGISTER' until the netdev's reference count drops to 1. This
causes devlink to set the port type back to Ethernet.

Fix by only setting and clearing the port type upon 'NETDEV_POST_INIT'
and 'NETDEV_PRE_UNINIT', respectively. For all other events, preserve
the port type.

[1]
WARNING: CPU: 0 PID: 11 at net/core/devlink.c:9998 devl_port_unregister+0x2f6/0x390 net/core/devlink.c:9998
Modules linked in:
CPU: 1 PID: 11 Comm: kworker/u4:1 Not tainted 6.1.0-rc3-next-20221107-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/26/2022
Workqueue: netns cleanup_net
RIP: 0010:devl_port_unregister+0x2f6/0x390 net/core/devlink.c:9998
[...]
Call Trace:
 <TASK>
 __nsim_dev_port_del+0x1bb/0x240 drivers/net/netdevsim/dev.c:1433
 nsim_dev_port_del_all drivers/net/netdevsim/dev.c:1443 [inline]
 nsim_dev_reload_destroy+0x171/0x510 drivers/net/netdevsim/dev.c:1660
 nsim_dev_reload_down+0x6b/0xd0 drivers/net/netdevsim/dev.c:968
 devlink_reload+0x1c2/0x6b0 net/core/devlink.c:4501
 devlink_pernet_pre_exit+0x104/0x1c0 net/core/devlink.c:12609
 ops_pre_exit_list net/core/net_namespace.c:159 [inline]
 cleanup_net+0x451/0xb10 net/core/net_namespace.c:594
 process_one_work+0x9bf/0x1710 kernel/workqueue.c:2289
 worker_thread+0x665/0x1080 kernel/workqueue.c:2436
 kthread+0x2e4/0x3a0 kernel/kthread.c:376
 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:308
 </TASK>

Fixes: 02a68a47 ("net: devlink: track netdev with devlink_port assigned")
Reported-by: syzbot+85e47e1a08b3e159b159@syzkaller.appspotmail.com
Reported-by: syzbot+c2ca18f0fccdd1f09c66@syzkaller.appspotmail.com
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Link: https://lore.kernel.org/r/20221110085150.520800-1-idosch@nvidia.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Long Li says:

====================
Introduce Microsoft Azure Network Adapter (MANA) RDMA driver [netdev prep]

The first 11 patches which modify the MANA Ethernet driver to support
RDMA driver.

* 'mana-shared-6.2' of https://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
  net: mana: Define data structures for protection domain and memory registration
  net: mana: Define data structures for allocating doorbell page from GDMA
  net: mana: Define and process GDMA response code GDMA_STATUS_MORE_ENTRIES
  net: mana: Define max values for SGL entries
  net: mana: Move header files to a common location
  net: mana: Record port number in netdev
  net: mana: Export Work Queue functions for use by RDMA driver
  net: mana: Set the DMA device max segment size
  net: mana: Handle vport sharing between devices
  net: mana: Record the physical address for doorbell page region
  net: mana: Add support for auxiliary device
====================

Link: https://lore.kernel.org/all/1667502990-2559-1-git-send-email-longli@linuxonhyperv.com/Signed-off-by: Jakub Kicinski <kuba@kernel.org>

If ethtool_ops::get_drvinfo() callback isn't set,
ethtool_get_drvinfo() will fill the ethtool_drvinfo::name and
ethtool_drvinfo::bus_info fields.

However, if the driver provides the callback function, those two
fields are not touched. This means that the driver has to fill these
itself.

Allow the driver to leave those two fields empty and populate them in
such case. This way, the driver can rely on the default values for the
name and the bus_info. If the driver provides values, do nothing.
Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Link: https://lore.kernel.org/r/20221108035754.2143-1-mailhol.vincent@wanadoo.frSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Pull btrfs fixes from David Sterba:

 - revert memory optimization for scrub blocks, this misses errors in
   2nd and following blocks

 - add exception for ENOMEM as reason for transaction abort to not print
   stack trace, syzbot has reported many

 - zoned fixes:
      - fix locking imbalance during scrub
      - initialize zones for seeding device
      - initialize zones for cloned device structures

 - when looking up device, change assertion to a real check as some of
   the search parameters can be passed by ioctl, reported by syzbot

 - fix error pointer check in self tests

* tag 'for-6.1-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
  btrfs: zoned: fix locking imbalance on scrub
  btrfs: zoned: initialize device's zone info for seeding
  btrfs: zoned: clone zoned device info when cloning a device
  Revert "btrfs: scrub: use larger block size for data extent scrub"
  btrfs: don't print stack trace when transaction is aborted due to ENOMEM
  btrfs: selftests: fix wrong error check in btrfs_free_dummy_root()
  btrfs: fix match incorrectly in dev_args_match_device

Pull soundwire fixes from Vinod Koul:
 "Two qcom driver fixes for broadcast completion reinit and check for
  outanding writes. And a lone Intel driver fix for clock stop timeout"

* tag 'soundwire-6.1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire:
  soundwire: qcom: check for outanding writes before doing a read
  soundwire: qcom: reinit broadcast completion
  soundwire: intel: Initialize clock stop timeout