- 05 Nov, 2014 3 commits
-
-
Jan Kara authored
commit 279bf6d3 upstream. The check whether quota format is set even though there are no quota files with journalled quota is pointless and it actually makes it impossible to turn off journalled quotas (as there's no way to unset journalled quota format). Just remove the check. Signed-off-by:
Jan Kara <jack@suse.cz> Signed-off-by:
Theodore Ts'o <tytso@mit.edu> Signed-off-by:
Luis Henriques <luis.henriques@canonical.com>
-
Darrick J. Wong authored
commit 064d8389 upstream. Free the buffer head if the journal descriptor block fails checksum verification. This is the jbd2 port of the e2fsprogs patch "e2fsck: free bh on csum verify error in do_one_pass". Signed-off-by:
Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by:
Eric Sandeen <sandeen@redhat.com> Signed-off-by:
-
Darrick J. Wong authored
commit a0626e75 upstream. When loading extended attributes, check each entry's value offset to make sure it doesn't collide with the entries. Without this check it is easy to crash the kernel by mounting a malicious FS containing a file with an EA wherein e_value_offs = 0 and e_value_size > 0 and then deleting the EA, which corrupts the name list. (See the f_ea_value_crash test's FS image in e2fsprogs for an example.) Signed-off-by:
-
- 03 Nov, 2014 11 commits
-
-
Johannes Weiner authored
commit abe5f972 upstream. The zone allocation batches can easily underflow due to higher-order allocations or spills to remote nodes. On SMP that's fine, because underflows are expected from concurrency and dealt with by returning 0. But on UP, zone_page_state will just return a wrapped unsigned long, which will get past the <= 0 check and then consider the zone eligible until its watermarks are hit. Commit 3a025760 ("mm: page_alloc: spill to remote nodes before waking kswapd") already made the counter-resetting use atomic_long_read() to accomodate underflows from remote spills, but it didn't go all the way with it. Make it clear that these batches are expected to go negative regardless of concurrency, and use atomic_long_read() everywhere. Fixes: 81c0a2bb ("mm: page_alloc: fair zone allocator policy") Reported-by:
Vlastimil Babka <vbabka@suse.cz> Reported-by:
Leon Romanovsky <leon@leon.nu> Signed-off-by:
Johannes Weiner <hannes@cmpxchg.org> Acked-by:
Mel Gorman <mgorman@suse.de> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> [ luis: backported to 3.16 by Johannes Weiner ] Signed-off-by:
-
Fabian Frederick authored
commit 2f3169fb upstream. Commit 65b38851 ("NFS: Fix /proc/fs/nfsfs/servers and /proc/fs/nfsfs/volumes") updated the following function: static int nfs_volume_list_open(struct inode *inode, struct file *file) it used &nfs_server_list_ops instead of &nfs_volume_list_ops which means cat /proc/fs/nfsfs/volumes = /proc/fs/nfsfs/servers Signed-off-by:
Fabian Frederick <fabf@skynet.be> Fixes: 65b38851 (NFS: Fix /proc/fs/nfsfs/servers and...) Signed-off-by:
Trond Myklebust <trond.myklebust@primarydata.com> Signed-off-by:
-
Eric W. Biederman authored
commit 65b38851 upstream. The usage of pid_ns->child_reaper->nsproxy->net_ns in nfs_server_list_open and nfs_client_list_open is not safe. /proc for a pid namespace can remain mounted after the all of the process in that pid namespace have exited. There are also times before the initial process in a pid namespace has started or after the initial process in a pid namespace has exited where pid_ns->child_reaper can be NULL or stale. Making the idiom pid_ns->child_reaper->nsproxy a double whammy of problems. Luckily all that needs to happen is to move /proc/fs/nfsfs/servers and /proc/fs/nfsfs/volumes under /proc/net to /proc/net/nfsfs/servers and /proc/net/nfsfs/volumes and add a symlink from the original location, and to use seq_open_net as it has been designed. Cc: Trond Myklebust <trond.myklebust@primarydata.com> Cc: Stanislav Kinsbursky <skinsbursky@parallels.com> Signed-off-by:
"Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by:
-
Xose Vazquez Perez authored
commit 6a06e554 upstream. 0x0b05 0x17e8 RT5372 USB 2.0 bgn 2x2 ASUS USB-N14 0x0411 0x0253 RT5572 USB 2.0 abgn 2x2 BUFFALO WLP-U2-300D 0x0df6 0x0078 RT???? Sitecom N300 Cc: Ivo van Doorn <IvDoorn@gmail.com> Cc: Helmut Schaa <helmut.schaa@googlemail.com> Cc: John W. Linville <linville@tuxdriver.com> Cc: users@rt2x00.serialmonkey.com Cc: linux-wireless@vger.kernel.org Signed-off-by:
Xose Vazquez Perez <xose.vazquez@gmail.com> Signed-off-by:
John W. Linville <linville@tuxdriver.com> Cc: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by:
-
Canek Peláez Valdés authored
commit ac0372ab upstream. Signed-off-by:
Canek Peláez Valdés <canek@ciencias.unam.mx> Signed-off-by:
-
Geert Uytterhoeven authored
commit a968bed7 upstream. Unlike the clocks management code for runtime PM, the code used for system suspend does not check the pm_clock_entry.status field. If pm_clk_acquire() failed, ce->status will be PCE_STATUS_ERROR, and ce->clk will be a negative error code (e.g. 0xfffffffe = -2 = -ENOENT). Depending on the clock implementation, suspend or resume may crash with: Unable to handle kernel NULL pointer dereference at virtual address 00000026 (CCF clk_disable() has an IS_ERR_OR_NULL() check, while CCF clk_enable() only has a NULL check; pre-CCF implementations may behave differently) While just checking for PCE_STATUS_ERROR would be sufficient, it doesn't hurt to use the same state machine as is done for runtime PM, as this makes the two versions more similar, and eligible for a future consolidation. Signed-off-by:
Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
-
Arjun Sreedharan authored
commit 2c4e3dbf upstream. When __usb_find_phy_dev() does not return error and try_module_get() fails, return -ENODEV. Signed-off-by:
Arjun Sreedharan <arjun024@gmail.com> Signed-off-by:
Felipe Balbi <balbi@ti.com> Cc: Mark Brown <broonie@kernel.org> Signed-off-by:
-
Miklos Szeredi authored
commit 2c80929c upstream. The third argument of fuse_get_user_pages() "nbytesp" refers to the number of bytes a caller asked to pack into fuse request. This value may be lesser than capacity of fuse request or iov_iter. So fuse_get_user_pages() must ensure that *nbytesp won't grow. Now, when helper iov_iter_get_pages() performs all hard work of extracting pages from iov_iter, it can be done by passing properly calculated "maxsize" to the helper. The other caller of iov_iter_get_pages() (dio_refill_pages()) doesn't need this capability, so pass LONG_MAX as the maxsize argument here. Fixes: c9c37e2e ("fuse: switch to iov_iter_get_pages()") Reported-by:
Werner Baumann <werner.baumann@onlinehome.de> Tested-by:
Maxim Patlasov <mpatlasov@parallels.com> Signed-off-by:
Miklos Szeredi <mszeredi@suse.cz> Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
-
Al Viro authored
commit c7f3888a upstream. ... instead of maximal size. Signed-off-by:
-
Michal Marek authored
commit 2d087139 upstream. Since the conversion of objtree to use relative pathnames (commit 7e1c0477, "kbuild: Use relative path for $(objtree)"), the debug info files have been ending up in /debian/dbgtmp/ in the regular linux-image package instead of the debug files package. Fix up the paths so that the debug files end up in the -dbg package. This is based on a similar patch by Darrick. Reported-and-tested-by:
Michal Marek <mmarek@suse.cz> Cc: Ben Hutchings <ben@decadent.org.uk> Signed-off-by:
-
Ezequiel Garcia authored
commit b478e336 upstream. The current error path calls tilcdc_unload() in case of an error to release the resources. However, this is wrong because not all resources have been allocated by the time an error occurs in tilcdc_load(). To fix it, this commit adds proper labels to bail out at the different stages in the load function, and release only the resources actually allocated. Tested-by:
Darren Etheridge <detheridge@ti.com> Tested-by:
Johannes Pointner <johannes.pointner@br-automation.com> Signed-off-by:
Ezequiel Garcia <ezequiel@vanguardiasur.com.ar> Signed-off-by:
Dave Airlie <airlied@redhat.com> Cc: matwey.kornilov@gmail.com Signed-off-by:
-
- 30 Oct, 2014 26 commits
-
-
Greg Kroah-Hartman authored
-
David S. Miller authored
[ Upstream commit 06090e8e ] It is not sufficient to only implement get_user_pages_fast(), you must also implement the atomic version __get_user_pages_fast() otherwise you end up using the weak symbol fallback implementation which simply returns zero. This is dangerous, because it causes the futex code to loop forever if transparent hugepages are supported (see get_futex_key()). Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
David S. Miller authored
[ Upstream commit ef3e035c ] Meelis Roos reported that kernels built with gcc-4.9 do not boot, we eventually narrowed this down to only impacting machines using UltraSPARC-III and derivitive cpus. The crash happens right when the first user process is spawned: [ 54.451346] Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000004 [ 54.451346] [ 54.571516] CPU: 1 PID: 1 Comm: init Not tainted 3.16.0-rc2-00211-gd7933ab7 #96 [ 54.666431] Call Trace: [ 54.698453] [0000000000762f8c] panic+0xb0/0x224 [ 54.759071] [000000000045cf68] do_exit+0x948/0x960 [ 54.823123] [000000000042cbc0] fault_in_user_windows+0xe0/0x100 [ 54.902036] [0000000000404ad0] __handle_user_windows+0x0/0x10 [ 54.978662] Press Stop-A (L1-A) to return to the boot prom [ 55.050713] ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000004 Further investigation showed that compiling only per_cpu_patch() with an older compiler fixes the boot. Detailed analysis showed that the function is not being miscompiled by gcc-4.9, but it is using a different register allocation ordering. With the gcc-4.9 compiled function, something during the code patching causes some of the %i* input registers to get corrupted. Perhaps we have a TLB miss path into the firmware that is deep enough to cause a register window spill and subsequent restore when we get back from the TLB miss trap. Let's plug this up by doing two things: 1) Stop using the firmware stack for client interface calls into the firmware. Just use the kernel's stack. 2) As soon as we can, call into a new function "start_early_boot()" to put a one-register-window buffer between the firmware's deepest stack frame and the top-most initial kernel one. Reported-by:
Meelis Roos <mroos@linux.ee> Tested-by:
-
Dave Kleikamp authored
[ Upstream commit 1cef94c3 ] This is the longest boot string that silo supports. Signed-off-by:
Dave Kleikamp <dave.kleikamp@oracle.com> Cc: Bob Picco <bob.picco@oracle.com> Cc: David S. Miller <davem@davemloft.net> Cc: sparclinux@vger.kernel.org Signed-off-by:
-
David S. Miller authored
[ Upstream commit d195b71b ] swapper_low_pmd_dir and swapper_pud_dir are actually completely useless and unnecessary. We just need swapper_pg_dir[]. Naturally the other page table chunks will be allocated on an as-needed basis. Since the kernel actually accesses these tables in the PAGE_OFFSET view, there is not even a TLB locality advantage of placing them in the kernel image. Use the hard coded vmlinux.ld.S slot for swapper_pg_dir which is naturally page aligned. Increase MAX_BANKS to 1024 in order to handle heavily fragmented virtual guests. Even with this MAX_BANKS increase, the kernel is 20K+ smaller. Signed-off-by:
Bob Picco <bob.picco@oracle.com> Signed-off-by:
-
bob picco authored
[ Upstream commit ee6a9333 ] This patch attempts to do a few things. The highlights are: 1) enable SPARSE_IRQ unconditionally, 2) kills off !SPARSE_IRQ code 3) allocates ivector_table at boot time and 4) default to cookie only VIRQ mechanism for supported firmware. The first firmware with cookie only support for me appears on T5. You can optionally force the HV firmware to not cookie only mode which is the sysino support. The sysino is a deprecated HV mechanism according to the most recent SPARC Virtual Machine Specification. HV_GRP_INTR is what controls the cookie/sysino firmware versioning. The history of this interface is: 1) Major version 1.0 only supported sysino based interrupt interfaces. 2) Major version 2.0 added cookie based VIRQs, however due to the fact that OSs were using the VIRQs without negoatiating major version 2.0 (Linux and Solaris are both guilty), the VIRQs calls were allowed even with major version 1.0 To complicate things even further, the VIRQ interfaces were only actually hooked up in the hypervisor for LDC interrupt sources. VIRQ calls on other device types would result in HV_EINVAL errors. So effectively, major version 2.0 is unusable. 3) Major version 3.0 was created to signal use of VIRQs and the fact that the hypervisor has these calls hooked up for all interrupt sources, not just those for LDC devices. A new boot option is provided should cookie only HV support have issues. hvirq - this is the version for HV_GRP_INTR. This is related to HV API versioning. The code attempts major=3 first by default. The option can be used to override this default. I've tested with SPARSE_IRQ on T5-8, M7-4 and T4-X and Jalap?no. Signed-off-by:
-
David S. Miller authored
[ Upstream commit bb4e6e85 ] In order to accomodate embedded per-cpu allocation with large numbers of cpus and numa nodes, we have to use as much virtual address space as possible for the vmalloc region. Otherwise we can get things like: PERCPU: max_distance=0x380001c10000 too large for vmalloc space 0xff00000000 So, once we select a value for PAGE_OFFSET, derive the size of the vmalloc region based upon that. Signed-off-by:
-
David S. Miller authored
Make sure, at compile time, that the kernel can properly support whatever MAX_PHYS_ADDRESS_BITS is defined to. On M7 chips, use a max_phys_bits value of 49. Based upon a patch by Bob Picco. Signed-off-by:
-
David S. Miller authored
[ Upstream commit c06240c7 ] For sparse memory configurations, the vmemmap array behaves terribly and it takes up an inordinate amount of space in the BSS section of the kernel image unconditionally. Just build huge PMDs and look them up just like we do for TLB misses in the vmalloc area. Kernel BSS shrinks by about 2MB. Signed-off-by:
-
David S. Miller authored
[ Upstream commit 0dd5b7b0 ] If max_phys_bits needs to be > 43 (f.e. for T4 chips), things like DEBUG_PAGEALLOC stop working because the 3-level page tables only can cover up to 43 bits. Another problem is that when we increased MAX_PHYS_ADDRESS_BITS up to 47, several statically allocated tables became enormous. Compounding this is that we will need to support up to 49 bits of physical addressing for M7 chips. The two tables in question are sparc64_valid_addr_bitmap and kpte_linear_bitmap. The first holds a bitmap, with 1 bit for each 4MB chunk of physical memory, indicating whether that chunk actually exists in the machine and is valid. The second table is a set of 2-bit values which tell how large of a mapping (4MB, 256MB, 2GB, 16GB, respectively) we can use at each 256MB chunk of ram in the system. These tables are huge and take up an enormous amount of the BSS section of the sparc64 kernel image. Specifically, the sparc64_valid_addr_bitmap is 4MB, and the kpte_linear_bitmap is 128K. So let's solve the space wastage and the DEBUG_PAGEALLOC problem at the same time, by using the kernel page tables (as designed) to manage this information. We have to keep using large mappings when DEBUG_PAGEALLOC is disabled, and we do this by encoding huge PMDs and PUDs. On a T4-2 with 256GB of ram the kernel page table takes up 16K with DEBUG_PAGEALLOC disabled and 256MB with it enabled. Furthermore, this memory is dynamically allocated at run time rather than coded statically into the kernel image. Signed-off-by:
-
David S. Miller authored
[ Upstream commit 8c82dc0e ] As currently coded the KTSB accesses in the kernel only support up to 47 bits of physical addressing. Adjust the instruction and patching sequence in order to support arbitrary 64 bits addresses. Signed-off-by:
-
David S. Miller authored
[ Upstream commit 4397bed0 ] Now that we use 4-level page tables, we can provide up to 53-bits of virtual address space to the user. Adjust the VA hole based upon the capabilities of the cpu type probed. Signed-off-by:
-
David S. Miller authored
[ Upstream commit ac55c768 ] This has become necessary with chips that support more than 43-bits of physical addressing. Based almost entirely upon a patch by Bob Picco. Signed-off-by:
-
bob picco authored
The T5 (niagara5) has different PCR related HV fast trap values and a new HV API Group. This patch utilizes these and shares when possible with niagara4. We use the same sparc_pmu niagara4_pmu. Should there be new effort to obtain the MCU perf statistics then this would have to be changed. Cc: sparclinux@vger.kernel.org Signed-off-by:
-
Allen Pais authored
Signed-off-by:
Allen Pais <allen.pais@oracle.com> Signed-off-by:
-
Allen Pais authored
Add M6 and M7 chip type in cpumap.c to correctly build CPU distribution map that spans all online CPUs. Signed-off-by:
-
Allen Pais authored
The following patch adds support for correctly recognising M6 and M7 cpu type. Signed-off-by:
-
David S. Miller authored
We changed PAGE_OFFSET to be a variable rather than a constant, but this reference here in the hibernate assembler got missed. Signed-off-by:
-
David S. Miller authored
[ Upstream commit e2653143 ] This breaks the stack end corruption detection facility. What that facility does it write a magic value to "end_of_stack()" and checking to see if it gets overwritten. "end_of_stack()" is "task_thread_info(p) + 1", which for sparc64 is the beginning of the FPU register save area. So once the user uses the FPU, the magic value is overwritten and the debug checks trigger. Fix this by making the size explicit. Due to the size we use for the fpsaved[], gsr[], and xfsr[] arrays we are limited to 7 levels of FPU state saves. So each FPU register set is 256 bytes, allocate 256 * 7 for the fpregs area. Reported-by:
-
David S. Miller authored
[ Upstream commit f4da3628 ] The AES loops in arch/sparc/crypto/aes_glue.c use a scheme where the key material is preloaded into the FPU registers, and then we loop over and over doing the crypt operation, reusing those pre-cooked key registers. There are intervening blkcipher*() calls between the crypt operation calls. And those might perform memcpy() and thus also try to use the FPU. The sparc64 kernel FPU usage mechanism is designed to allow such recursive uses, but with a catch. There has to be a trap between the two FPU using threads of control. The mechanism works by, when the FPU is already in use by the kernel, allocating a slot for FPU saving at trap time. Then if, within the trap handler, we try to use the FPU registers, the pre-trap FPU register state is saved into the slot. Then at trap return time we notice this and restore the pre-trap FPU state. Over the long term there are various more involved ways we can make this work, but for a quick fix let's take advantage of the fact that the situation where this happens is very limited. All sparc64 chips that support the crypto instructiosn also are using the Niagara4 memcpy routine, and that routine only uses the FPU for large copies where we can't get the source aligned properly to a multiple of 8 bytes. We look to see if the FPU is already in use in this context, and if so we use the non-large copy path which only uses integer registers. Furthermore, we also limit this special logic to when we are doing kernel copy, rather than a user copy. Signed-off-by:
-
David S. Miller authored
[ Upstream commit bdcf81b6 ] Inconsistently, the raw_* IRQ routines do not interact with and update the irqflags tracing and lockdep state, whereas the raw_* spinlock interfaces do. This causes problems in p1275_cmd_direct() because we disable hardirqs by hand using raw_local_irq_restore() and then do a raw_spin_lock() which triggers a lockdep trace because the CPU's hw IRQ state doesn't match IRQ tracing's internal software copy of that state. The CPU's irqs are disabled, yet current->hardirqs_enabled is true. ==================== reboot: Restarting system ------------[ cut here ]------------ WARNING: CPU: 0 PID: 1 at kernel/locking/lockdep.c:3536 check_flags+0x7c/0x240() DEBUG_LOCKS_WARN_ON(current->hardirqs_enabled) Modules linked in: openpromfs CPU: 0 PID: 1 Comm: systemd-shutdow Tainted: G W 3.17.0-dirty #145 Call Trace: [000000000045919c] warn_slowpath_common+0x5c/0xa0 [0000000000459210] warn_slowpath_fmt+0x30/0x40 [000000000048f41c] check_flags+0x7c/0x240 [0000000000493280] lock_acquire+0x20/0x1c0 [0000000000832b70] _raw_spin_lock+0x30/0x60 [000000000068f2fc] p1275_cmd_direct+0x1c/0x60 [000000000068ed28] prom_reboot+0x28/0x40 [000000000043610c] machine_restart+0x4c/0x80 [000000000047d2d4] kernel_restart+0x54/0x80 [000000000047d618] SyS_reboot+0x138/0x200 [00000000004060b4] linux_sparc_syscall32+0x34/0x60 ---[ end trace 5c439fe81c05a100 ]--- possible reason: unannotated irqs-off. irq event stamp: 2010267 hardirqs last enabled at (2010267): [<000000000049a358>] vprintk_emit+0x4b8/0x580 hardirqs last disabled at (2010266): [<0000000000499f08>] vprintk_emit+0x68/0x580 softirqs last enabled at (2010046): [<000000000045d278>] __do_softirq+0x378/0x4a0 softirqs last disabled at (2010039): [<000000000042bf08>] do_softirq_own_stack+0x28/0x40 Resetting ... ==================== Use local_* variables of the hw IRQ interfaces so that IRQ tracing sees all of our changes. Reported-by:
-
David S. Miller authored
[ Upstream commit 473ad7f4 ] When we have to split up a flush request into multiple pieces (in order to avoid the firmware range) we don't specify the arguments in the right order for the second piece. Fix the order, or else we get hangs as the code tries to flush "a lot" of entries and we get lockups like this: [ 4422.981276] NMI watchdog: BUG: soft lockup - CPU#12 stuck for 23s! [expect:117032] [ 4422.996130] Modules linked in: ipv6 loop usb_storage igb ptp sg sr_mod ehci_pci ehci_hcd pps_core n2_rng rng_core [ 4423.016617] CPU: 12 PID: 117032 Comm: expect Not tainted 3.17.0-rc4+ #1608 [ 4423.030331] task: fff8003cc730e220 ti: fff8003d99d54000 task.ti: fff8003d99d54000 [ 4423.045282] TSTATE: 0000000011001602 TPC: 00000000004521e8 TNPC: 00000000004521ec Y: 00000000 Not tainted [ 4423.064905] TPC: <__flush_tlb_kernel_range+0x28/0x40> [ 4423.074964] g0: 000000000052fd10 g1: 00000001295a8000 g2: ffffff7176ffc000 g3: 0000000000002000 [ 4423.092324] g4: fff8003cc730e220 g5: fff8003dfedcc000 g6: fff8003d99d54000 g7: 0000000000000006 [ 4423.109687] o0: 0000000000000000 o1: 0000000000000000 o2: 0000000000000003 o3: 00000000f0000000 [ 4423.127058] o4: 0000000000000080 o5: 00000001295a8000 sp: fff8003d99d56d01 ret_pc: 000000000052ff54 [ 4423.145121] RPC: <__purge_vmap_area_lazy+0x314/0x3a0> [ 4423.155185] l0: 0000000000000000 l1: 0000000000000000 l2: 0000000000a38040 l3: 0000000000000000 [ 4423.172559] l4: fff8003dae8965e0 l5: ffffffffffffffff l6: 0000000000000000 l7: 00000000f7e2b138 [ 4423.189913] i0: fff8003d99d576a0 i1: fff8003d99d576a8 i2: fff8003d99d575e8 i3: 0000000000000000 [ 4423.207284] i4: 0000000000008008 i5: fff8003d99d575c8 i6: fff8003d99d56df1 i7: 0000000000530c24 [ 4423.224640] I7: <free_vmap_area_noflush+0x64/0x80> [ 4423.234193] Call Trace: [ 4423.239051] [0000000000530c24] free_vmap_area_noflush+0x64/0x80 [ 4423.251029] [0000000000531a7c] remove_vm_area+0x5c/0x80 [ 4423.261628] [0000000000531b80] __vunmap+0x20/0x120 [ 4423.271352] [000000000071cf18] n_tty_close+0x18/0x40 [ 4423.281423] [00000000007222b0] tty_ldisc_close+0x30/0x60 [ 4423.292183] [00000000007225a4] tty_ldisc_reinit+0x24/0xa0 [ 4423.303120] [0000000000722ab4] tty_ldisc_hangup+0xd4/0x1e0 [ 4423.314232] [0000000000719aa0] __tty_hangup+0x280/0x3c0 [ 4423.324835] [0000000000724cb4] pty_close+0x134/0x1a0 [ 4423.334905] [000000000071aa24] tty_release+0x104/0x500 [ 4423.345316] [00000000005511d0] __fput+0x90/0x1e0 [ 4423.354701] [000000000047fa54] task_work_run+0x94/0xe0 [ 4423.365126] [0000000000404b44] __handle_signal+0xc/0x2c Fixes: 4ca9a237 ("sparc64: Guard against flushing openfirmware mappings.") Signed-off-by:
-
Alexei Starovoitov authored
[ Upstream commit 35607b02 ] - fix BPF_LD|ABS|IND from negative offsets: make sure to sign extend lower 32 bits in 64-bit register before calling C helpers from JITed code, otherwise 'int k' argument of bpf_internal_load_pointer_neg_helper() function will be added as large unsigned integer, causing packet size check to trigger and abort the program. It's worth noting that JITed code for 'A = A op K' will affect upper 32 bits differently depending whether K is simm13 or not. Since small constants are sign extended, whereas large constants are stored in temp register and zero extended. That is ok and we don't have to pay a penalty of sign extension for every sethi, since all classic BPF instructions have 32-bit semantics and we only need to set correct upper bits when transitioning from JITed code into C. - though instructions 'A &= 0' and 'A *= 0' are odd, JIT compiler should not optimize them out Signed-off-by:
Alexei Starovoitov <ast@plumgrid.com> Signed-off-by:
-
Alexei Starovoitov authored
[ Upstream commit f6f2332d ] fix several issues in sparc BPF JIT compiler. ldx/stx related: . classic BPF instructions that access mem[] slots were not setting SEEN_MEM flag, so stack wasn't allocated. Fix that by advertising correct flags . LDX/STX instructions were missing SEEN_XREG, so register value could have leaked to user space. Fix it. . since stack for mem[] slots is allocated with 'sub %sp' instead of 'save %sp', use %sp as base register instead of %fp. . ldx mem[0] means first slot in classic BPF which should have -4 offset instead of 0. . sparc64 needs 2047 stack bias as per ABI to access stack . emit_stmem() was using LD32I macro instead of ST32I SKF_AD_VLAN_TAG* related: . SKF_AD_VLAN_TAG_PRESENT must return 1 or 0 instead of '> 0' or 0 as per classic BPF de facto standard . SKF_AD_VLAN_TAG needs to mask the field correctly Fixes: 2809a208 ("net: filter: Just In Time compiler for sparc") Signed-off-by:
-
Andreas Larsson authored
[ Upstream commit 74cad25c ] This makes memset follow the standard (instead of returning 0 on success). This is needed when certain versions of gcc optimizes around memset calls and assume that the address argument is preserved in %o0. Signed-off-by:
Andreas Larsson <andreas@gaisler.com> Signed-off-by:
-
Sowmini Varadhan authored
[ Upstream commit c21c4ab0 ] The request_irq() needs to be done from ldc_alloc() to avoid the following (caught by lockdep) [00000000004a0738] __might_sleep+0xf8/0x120 [000000000058bea4] kmem_cache_alloc_trace+0x184/0x2c0 [00000000004faf80] request_threaded_irq+0x80/0x160 [000000000044f71c] ldc_bind+0x7c/0x220 [0000000000452454] vio_port_up+0x54/0xe0 [00000000101f6778] probe_disk+0x38/0x220 [sunvdc] [00000000101f6b8c] vdc_port_probe+0x22c/0x300 [sunvdc] [0000000000451a88] vio_device_probe+0x48/0x60 [000000000074c56c] really_probe+0x6c/0x300 [000000000074c83c] driver_probe_device+0x3c/0xa0 [000000000074c92c] __driver_attach+0x8c/0xa0 [000000000074a6ec] bus_for_each_dev+0x6c/0xa0 [000000000074c1dc] driver_attach+0x1c/0x40 [000000000074b0fc] bus_add_driver+0xbc/0x280 Signed-off-by:
Sowmini Varadhan <sowmini.varadhan@oracle.com> Acked-by:
Dwight Engen <dwight.engen@oracle.com> Signed-off-by:
-
