- 29 Aug, 2022 8 commits
-
-
Alvin Lee authored
[Description] There can be SubVP scheduling issues if a SubVP display is chosen has ActiveDramClockChangeLatency > 0. Block this case for now, and enable Vactive case (later) to handle this. Reviewed-by:
Jun Lei <Jun.Lei@amd.com> Acked-by:
Brian Chang <Brian.Chang@amd.com> Signed-off-by:
Alvin Lee <Alvin.Lee2@amd.com> Tested-by:
Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com>
-
Taimur Hassan authored
[Why & How] Add addtional check in CalculateODMMode for cases where the ODM combine is needed due to number of DSC slices. Reviewed-by:
Taimur Hassan <Syed.Hassan@amd.com> Tested-by:
-
Aric Cyr authored
This version brings along following fixes: - Modify pipe split policy - Fix odm 2:1 policy in 4k144 mode - Correct HDMI ODM combine policy - Change AUX NACK behavior - Change runtime initialization for DCN32/321 - Fix cursor flicker in PSRSU - Fix k1/k2 divider for virtual signal for DCN32 - Free phantom plane after removing the context - Add interface to track PHY state - Add SubVP scaling case - Add log clock table for SMU - Fix atomic_check check - Fix SMU 13.0.0 driver_if header - Fix doorbells allocation Acked-by:
Aric Cyr <aric.cyr@amd.com> Tested-by:
-
Yang Yingliang authored
Add missing pci_disable_device() if amdgpu_device_resume() fails. Fixes: 8e4d5d43 ("drm/amdgpu: Handling of amdgpu_device_resume return value for graceful teardown") Signed-off-by:
Yang Yingliang <yangyingliang@huawei.com> Signed-off-by:
-
sunliming authored
Fixes the following smatch warning: drivers/gpu/drm/amd/amdgpu/../display/dc/dc_dmub_srv.c:311 dc_dmub_srv_p_state_delegate() warn: variable dereferenced before check 'dc' (see line 309) Reported-by:
kernel test robot <lkp@intel.com> Reported-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
sunliming <sunliming@kylinos.cn> Signed-off-by:
-
ye xingchen authored
Return the value sdma_v5_2_start() directly instead of storing it in another redundant variable. Reported-by:
Zeal Robot <zealci@zte.com.cn> Signed-off-by:
ye xingchen <ye.xingchen@zte.com.cn> Signed-off-by:
-
Graham Sider authored
New GFX11 MES FW adds the trap_en bit. For now hardcode to 1 (traps enabled). Signed-off-by:
Graham Sider <Graham.Sider@amd.com> Acked-by:
Felix Kuehling <Felix.Kuehling@amd.com> Reviewed-by:
Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com> Signed-off-by:
-
Guchun Chen authored
Below driver load error will be printed, not friendly to end user. amdgpu: ATOM BIOS: 113-D603GLXE-077 [drm] FRU: Failed to get size field [drm:amdgpu_fru_get_product_info [amdgpu]] *ERROR* Failed to read FRU Manufacturer, ret:-5 Signed-off-by:
Guchun Chen <guchun.chen@amd.com> Reviewed-by:
Kent Russell <kent.russell@amd.com> Signed-off-by:
-
- 25 Aug, 2022 32 commits
-
-
Bernard Zhao authored
This patch fix cocci warning: drivers/gpu/drm/amd/display/dc/dcn314/dcn314_resource.c:1816:6-8: WARNING: possible condition with no effect (if == else). Signed-off-by:
Bernard Zhao <bernard@vivo.com> Signed-off-by:
-
Bernard Zhao authored
This patch fix cocci warning: drivers/gpu/drm/amd/display/dc/core/dc.c:3335:2-4: WARNING: possible condition with no effect (if == else). Signed-off-by:
-
Bernard Zhao authored
This patch fix potential memory leak (clk_src) when function run into last return NULL. Signed-off-by:
-
Bernard Zhao authored
This patch fix potential memory leak (clk_src) when function run into last return NULL. s/free/kfree/ - Alex Signed-off-by:
-
Qu Huang authored
The mmVM_L2_CNTL3 register is not assigned an initial value Signed-off-by:
Qu Huang <jinsdb@126.com> Signed-off-by:
-
Rafael J. Wysocki authored
According to the ACPI specification [1], the ACPI_FADT_LOW_POWER_S0 flag merely means that it is better to use low-power S0 idle on the given platform than S3 (provided that the latter is supported) and it doesn't preclude using either of them (which of them will be used depends on the choices made by user space). However, on some systems that flag is used to indicate whether or not to enable special firmware mechanics allowing the system to save more energy when suspended to idle. If that flag is unset, doing so is generally risky. Accordingly, add a comment to explain the ACPI_FADT_LOW_POWER_S0 check in amdgpu_acpi_is_s0ix_active(), the purpose of which is otherwise somewhat unclear. Link: https://uefi.org/specs/ACPI/6.4/05_ACPI_Software_Programming_Model/ACPI_Software_Programming_Model.html#fixed-acpi-description-table-fadt # [1] Reviewed-by:
Mario Limonciello <mario.limonciello@amd.com> Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
-
Yu Zhe authored
time_after() deals with timer wrapping correctly. Signed-off-by:
Yu Zhe <yuzhe@nfschina.com> Signed-off-by:
-
Guchun Chen authored
'free PSP TMR buffer' happens in suspend, but sometimes in mGPU config, it mixes with PSP resume log printing from another GPU, which is confusing. So use dev_info instead of DRM_INFO for printing. [drm] PSP is resuming... [drm] reserve 0xa00000 from 0x877e000000 for PSP TMR amdgpu 0000:e3:00.0: amdgpu: GECC is enabled amdgpu 0000:e3:00.0: amdgpu: SECUREDISPLAY: securedisplay ta ucode is not available amdgpu 0000:e3:00.0: amdgpu: SMU is resuming... amdgpu 0000:e3:00.0: amdgpu: smu driver if version = 0x00000040, smu fw if version = 0x00000041, smu fw program = 0, version = 0x003a5400 (58.84.0) amdgpu 0000:e3:00.0: amdgpu: SMU driver if version not matched amdgpu 0000:e3:00.0: amdgpu: dpm has been enabled amdgpu 0000:e3:00.0: amdgpu: SMU is resumed successfully! [drm] DMUB hardware initialized: version=0x02020014 [drm] free PSP TMR buffer [drm] kiq ring mec 2 pipe 1 q 0 Signed-off-by:
Evan Quan <evan.quan@amd.com> Signed-off-by:
-
Guchun Chen authored
adev_to_drm is used everywhere in amdgpu code, so modify it to keep consistency. Signed-off-by:
Christian König <christian.koenig@amd.com> Signed-off-by:
-
Likun Gao authored
Enable GFX11 MGCG perfmon setting. V2: set rlc to saft mode before setting. Signed-off-by:
Likun Gao <Likun.Gao@amd.com> Reviewed-by:
Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by:
-
Chengming Gui authored
Avoid soft reset, even ip hang check (ring/ib test) when gpu recovery disabled. v2: add missing "}" Signed-off-by:
Chengming Gui <Jack.Gui@amd.com> Reviewed-by:
-
Prike Liang authored
Correct the isa version for handling KFD test. Fixes: 7c4f4f19 ("drm/amdkfd: Add GC 10.3.6 and 10.3.7 KFD definitions") Signed-off-by:
Prike Liang <Prike.Liang@amd.com> Reviewed-by:
Aaron Liu <aaron.liu@amd.com> Signed-off-by:
-
Mukul Joshi authored
When translate_further is enabled, page table depth needs to be updated. This was missing on Arcturus MMHUB init. This was causing address translations to fail for SDMA user-mode queues. Fixes: 352e683b ("drm/amdgpu: Enable translate_further to extend UTCL2 reach") Reviewed-by:
Mukul Joshi <mukul.joshi@amd.com> Signed-off-by:
-
Felix Kuehling authored
Only allocate doorbells when the first queue is created on a GPU or the doorbells need to be mapped into CPU or GPU virtual address space. This avoids allocating doorbells unnecessarily and can allow more processes to use KFD on multi-GPU systems. Signed-off-by:
-
Evan Quan authored
To fit the latest 78.53 PMFW. Signed-off-by:
Feifei Xu <Feifei.Xu@amd.com> Signed-off-by:
-
Roman Li authored
[Why] We have 2 back-to-back checks for skipping connectors. Logically one of them will do the job. [How] Remove redundant check. Reviewed-by:
Hersen Wu <hersenxs.wu@amd.com>> Acked-by:
Roman Li <roman.li@amd.com> Tested-by:
-
Leo Chen authored
[Why & How] Adding log for clock table from SMU helps with the debugging process. Implemented using DC_LOG_SMU to output log. Reviewed-by:
Charlene Liu <Charlene.Liu@amd.com> Acked-by:
Leo Chen <sancchen@amd.com> Tested-by:
-
Alvin Lee authored
[Description] Uncomment scaling cmd assignment since FW headers are now promoted. Reviewed-by:
Martin Leung <Martin.Leung@amd.com> Acked-by:
-
Alvin Lee authored
[Why] Sometimes pixel clock needs to remain active after transmitter disable. [How] Use update_phy_state to track PHY state after stream enable/disable and program pixel clock as needed. Reviewed-by:
-
Alvin Lee authored
[Description] Refcount is incremented on allocation and when adding to the context. Therefore we must release the phantom plane and stream after removing from the context. Reviewed-by:
-
Aurabindo Pillai authored
[Why&How] When using IGT, kms_bw multi display tests trigger an assert since we ignore virtual signal type. k1/k2 dividers should be correctly programmed if VSYNC needs to be correct. Add the appropriate condition to the if arm to fix this. Reviewed-by:
Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Acked-by:
Aurabindo Pillai <aurabindo.pillai@amd.com> Tested-by:
-
Robin Chen authored
[Why] The DAL driver may transmit the wrong cursor position to PSRSU DMUB driver when there are multiple planes. [How] Currently the driver apply the HW cursor on the top plane. So we should only transmit the cursor position on the top plane to PSRSU DMUB driver. Reviewed-by:
Anthony Koo <Anthony.Koo@amd.com> Acked-by:
Robin Chen <po-tchen@amd.com> Tested-by:
-
Aurabindo Pillai authored
DC was using compile time initialization of register addresses using SR_* macros and their variants. These have been converted to use runtime initialization. The REG_STRUCT macro is a definition that is added to SR_* macros. During initialization, this must be defined before SR_* macros are invoked, which are in turn invoked through various IP initialization macros. Reviewed-by:
Harry Wentland <Harry.Wentland@amd.com> Acked-by:
-
Aurabindo Pillai authored
DC was using compile time initialization of register addresses using SR_* macros and their variants. These have been converted to use runtime initialization. The REG_STRUCT macro is a definition that is added to SR_* macros. During initialization, this must be defined before SR_* macros are invoked, which are in turn invoked through various IP initialization macros. Reviewed-by:
-
Ilya Bakoulin authored
[Why] Retrying on receiving a NACK can result in long overall EDID read times in some cases. [How] Retry only on DEFER and return immediately on NACK. Reviewed-by:
Ilya Bakoulin <Ilya.Bakoulin@amd.com> Tested-by:
-
Saaem Rizvi authored
[WHY] Reprogramming the stream despite no changes in ODM combine mode. Reprogramming the stream would cause intermittent black screen on display which could only be recovered through enable/disable sequence. [HOW] Fixed bug where we detected a change in ODM combine mode despite ODM combine mode being disabled. Also removed code which required stream to be reprogrammed once a change in ODM combine mode was noticed. Lastly we do not support dynamic ODM switching for HDMI TMDS and FRL on DCN32, therefore we never want to change its ODM policy. Reviewed-by:
Samson Tam <Samson.Tam@amd.com> Acked-by:
Saaem Rizvi <SyedSaaem.Rizvi@amd.com> Tested-by:
-
Samson Tam authored
[Why] odm 2:1 policy is splitting the pipes in 4k144. then in subvp code, we merge the pipes. but since the configuration is unsupported, we keep the pipes split [How] for unsupported subvp configuration, redo the dml and pipe split calls Reviewed-by:
-
Derek Lai authored
[Why] RV2 do not change pipe split policy in the minimal pipe split transition state. This will unblock mode support on some parts that limit to DPM0 for power reason. [How] Do not change pipe split policy in the minimal pipe split transition state to allow 4k multi display configs to be supported at DPM0. Reviewed-by:
Derek Lai <Derek.Lai@amd.com> Tested-by:
-
Aric Cyr authored
This verion brings along following fixes: -Add scaling factor for SubVP -Modify stop_dbg_mode return value -Add gfx_off members and document -Add GFXOFF function for vangogh -Add GFXOFF stats to debug -Fix codestyle problems -Fix overflow on MIN_I64 -Fix Unneeded semicolon -Fix comment typo -Remove useless condition in amdgpu_job_stop_all_jobs_on_sched() -Add decoder_iv_ts helper for ih_v6 -Add chip version to DCN32 -Avoid doing vm_init multiple time -Modify size calculation in MALL -Fix DSC for phantom pipes -Update clock table policy for DCN314 -Modify header inclusion pattern -Fix plug/unplug external monitor will playback MPO video -Add debug parameter to retain default clock table -Increase tlb flush timeout for sriov -Fix compare intergers of different widths -Add reserved dc_log_type -Fix pixel clock programming Acked-by:
-
Anthony Koo authored
- For SubVP add scaling factor to allow firmware to calculate accurate line to start programming Reviewed-by:
-
Vignesh Chander authored
Skip set_topology_info as xgmi TA will now block it and host needs to program it. Signed-off-by:
Vignesh Chander <Vignesh.Chander@amd.com> Reviewed-By : Shaoyun Liu <Shaoyun.Liu@amd.com> Signed-off-by:
-
Tim Huang authored
For some ASICs, like GFX IP v11.0.1, only have one SDMA instance, so not need to configure SDMA1_RLC_CGCG_CTRL for this case. Signed-off-by:
Tim Huang <tim.huang@amd.com> Reviewed-by:
Yifan Zhang <yifan1.zhang@amd.com> Signed-off-by:
-
