Pull rdma fixes from Doug Ledford:
 "Round one of 4.8 rc fixes.

  This should be the bulk of the -rc fixes for 4.8.  I only have a few
  things that are still outstanding (two ipoib bugs for which the
  solution is not yet fully known, and a few queued items that came in
  after my last push and I didn't want to delay this pull request for
  late comers again).

  Even though the patch count is kind of high, everything is minor fixes
  so the overall churn is pretty low.

  Summary:

   - minor fixes to cxgb4
   - minor fixes to mlx4
   - one minor fix each to core, rxe, isert, srpt, mlx5, ocrdma, and usnic
   - six or so fixes to i40iw fixes
   - the rest are hfi1 fixes"

* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma: (34 commits)
  i40iw: Send last streaming mode message for loopback connections
  IB/srpt: Update sport->port_guid with each port refresh
  RDMA/ocrdma: Fix the max_sge reported from FW
  i40iw: Avoid writing to freed memory
  i40iw: Fix double free of allocated_buffer
  IB/mlx5: Remove superfluous include of io-mapping.h
  i40iw: Do not set self-referencing pointer to NULL after kfree
  i40iw: Add missing NULL check for MPA private data
  iw_cxgb4: Fix cxgb4 arm CQ logic w/IB_CQ_REPORT_MISSED_EVENTS
  i40iw: Add missing check for interface already open
  i40iw: Protect req_resource_num update
  i40iw: Change mem_resources pointer to a u8
  IB/core: Use memdup_user() rather than duplicating its implementation
  IB/qib: Use memdup_user() rather than duplicating its implementation
  iw_cxgb4: use the MPA initiator's IRD if < our ORD
  iw_cxgb4: limit IRD/ORD advertised to ULP by device max.
  IB/hfi1: Fix mm_struct use after free
  IB/rdmvat: Fix double vfree() in rvt_create_qp() error path
  IB/hfi1: Improve J_KEY generation
  IB/hfi1: Return invalid field for non-QSFP CableInfo queries
  ...

Pull sound fixes from Takashi Iwai:
 "Here are a bunch of fixes as you can see in diffstat.

  One core change in ASoC is about the unexpected unbinding error, and
  another about debugfs cleanup.

  The rest are wide-spread driver-specific fixes: a series of LINE6 USB
  fixes, a HD-audio quirk, and various ASoC fixes including OMAP boot
  fixes and Intel SKL fixes"

* tag 'sound-4.8-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (22 commits)
  ALSA: hda/realtek - fix headset mic detection for MSI MS-B120
  ASoC: omap-mcpdm: Fix irq resource handling
  ASoC: max98371: Add terminate entry for i2c_device_id tables
  ALSA: line6: Fix POD sysfs attributes segfault
  ALSA: line6: Give up on the lock while URBs are released.
  ALSA: line6: Remove double line6_pcm_release() after failed acquire.
  ASoC: omap-abe-twl6040: Correct dmic-codec device registration
  ASoC: core: Clean up DAPM before the card debugfs
  ASoC: omap-mcpdm: Drop pdmclk clock handling
  ASoC: atmel_ssc_dai: Don't unconditionally reset SSC on stream startup
  ASoC: compress: Fix leak of a widget list in soc_compr_open_fe
  ASoC: Intel: Skylake: Fix error return code in skl_probe()
  ASoC: wm2000: Fix return of uninitialised varible
  ASoC: Fix leak of rtd in soc_bind_dai_link
  ASoC: da7213: Default to 64 BCLKs per WCLK to support all formats
  ASoC: nau8825: fix static check error about semaphone control
  ASoC: nau8825: fix bug in playback when suspend
  ASoC: samsung: Fix clock handling in S3C24XX_UDA134X card
  ASoC: simple-card-utils: add missing MODULE_xxx()
  ASoC: Intel: Skylake: Check list empty while getting module info
  ...

Pull btrfs fixes from Chris Mason:
 "We've queued up a few different fixes in here.  These range from
  enospc corners to fsync and quota fixes, and a few targeted at error
  handling for corrupt metadata/fuzzing"

* 'for-linus-4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
  Btrfs: fix lockdep warning on deadlock against an inode's log mutex
  Btrfs: detect corruption when non-root leaf has zero item
  Btrfs: check btree node's nritems
  btrfs: don't create or leak aliased root while cleaning up orphans
  Btrfs: fix em leak in find_first_block_group
  btrfs: do not background blkdev_put()
  Btrfs: clarify do_chunk_alloc()'s return value
  btrfs: fix fsfreeze hang caused by delayed iputs deal
  btrfs: update btrfs_space_info's bytes_may_use timely
  btrfs: divide btrfs_update_reserved_bytes() into two functions
  btrfs: use correct offset for reloc_inode in prealloc_file_extent_cluster()
  btrfs: qgroup: Fix qgroup incorrectness caused by log replay
  btrfs: relocation: Fix leaking qgroups numbers on data extents
  btrfs: qgroup: Refactor btrfs_qgroup_insert_dirty_extent()
  btrfs: waiting on qgroup rescan should not always be interruptible
  btrfs: properly track when rescan worker is running
  btrfs: flush_space: treat return value of do_chunk_alloc properly
  Btrfs: add ASSERT for block group's memory leak
  btrfs: backref: Fix soft lockup in __merge_refs function
  Btrfs: fix memory leak of reloc_root

Pull dlm fix from David Teigland:
 "This fixes a bug introduced by recent debugfs cleanup"

* tag 'dlm-4.8-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/teigland/linux-dlm:
  dlm: fix malfunction of dlm_tool caused by debugfs changes

Pull device mapper fixes from Mike Snitzer:

 - another stable fix for DM flakey (that tweaks the previous fix that
   didn't factor in expected 'drop_writes' behavior for read IO).

 - a dm-log bio operation flags fix for the broader block changes that
   were merged during the 4.8 merge window.

* tag 'dm-4.8-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
  dm log: fix unitialized bio operation flags
  dm flakey: fix reads to be issued if drop_writes configured

Pull IOMMU fixes from Joerg Roedel:
 "Fixes from Will Deacon:

   - fix a couple of thinkos in the CMDQ error handling and
     short-descriptor page table code that have been there since day one

   - disable stalling faults, since they may result in hardware deadlock

   - fix an accidental BUG() when passing disable_bypass=1 on the
     cmdline"

* tag 'iommu-fixes-v4.8-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
  iommu/arm-smmu: Don't BUG() if we find aborting STEs with disable_bypass
  iommu/arm-smmu: Disable stalling faults for all endpoints
  iommu/arm-smmu: Fix CMDQ error handling
  iommu/io-pgtable-arm-v7s: Fix attributes when splitting blocks

Pull block fixes from Jens Axboe:
 "Here's a set of block fixes for the current 4.8-rc release.  This
  contains:

   - a fix for a secure erase regression, from Adrian.

   - a fix for an mmc use-after-free bug regression, also from Adrian.

   - potential zero pointer deference in bdev freezing, from Andrey.

   - a race fix for blk_set_queue_dying() from Bart.

   - a set of xen blkfront fixes from Bob Liu.

   - three small fixes for bcache, from Eric and Kent.

   - a fix for a potential invalid NVMe state transition, from Gabriel.

   - blk-mq CPU offline fix, preventing us from issuing and completing a
     request on the wrong queue.  From me.

   - revert two previous floppy changes, since they caused a user
     visibile regression.  A better fix is in the works.

   - ensure that we don't send down bios that have more than 256
     elements in them.  Fixes a crash with bcache, for example.  From
     Ming.

   - a fix for deferencing an error pointer with cgroup writeback.
     Fixes a regression.  From Vegard"

* 'for-linus' of git://git.kernel.dk/linux-block:
  mmc: fix use-after-free of struct request
  Revert "floppy: refactor open() flags handling"
  Revert "floppy: fix open(O_ACCMODE) for ioctl-only open"
  fs/block_dev: fix potential NULL ptr deref in freeze_bdev()
  blk-mq: improve warning for running a queue on the wrong CPU
  blk-mq: don't overwrite rq->mq_ctx
  block: make sure a big bio is split into at most 256 bvecs
  nvme: Fix nvme_get/set_features() with a NULL result pointer
  bdev: fix NULL pointer dereference
  xen-blkfront: free resources if xlvbd_alloc_gendisk fails
  xen-blkfront: introduce blkif_set_queue_limits()
  xen-blkfront: fix places not updated after introducing 64KB page granularity
  bcache: pr_err: more meaningful error message when nr_stripes is invalid
  bcache: RESERVE_PRIO is too small by one when prio_buckets() is a power of two.
  bcache: register_bcache(): call blkdev_put() when cache_alloc() fails
  block: Fix race triggered by blk_set_queue_dying()
  block: Fix secure erase
  nvme: Prevent controller state invalid transition

Pull input subsystem fixes from Dmitry Torokhov:
 "Simply small driver fixups"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: ads7846 - remove redundant regulator_disable call
  Input: synaptics-rmi4 - fix register descriptor subpacket map construction
  Input: tegra-kbc - fix inverted reset logic
  Input: silead - use devm_gpiod_get
  Input: i8042 - set up shared ps2_cmd_mutex for AUX ports

Pull PCI fixes from Bjorn Helgaas:
 "Resource management:
   - Update "pci=resource_alignment" documentation (Mathias Koehrer)

  MSI:
   - Use positive flags in pci_alloc_irq_vectors() (Christoph Hellwig)
   - Call pci_intx() when using legacy interrupts in pci_alloc_irq_vectors() (Christoph Hellwig)

  Intel VMD host bridge driver:
   - Fix infinite loop executing irq's (Keith Busch)"

* tag 'pci-v4.8-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
  x86/PCI: VMD: Fix infinite loop executing irq's
  PCI: Call pci_intx() when using legacy interrupts in pci_alloc_irq_vectors()
  PCI: Use positive flags in pci_alloc_irq_vectors()
  PCI: Update "pci=resource_alignment" documentation

With the current kernel, `dlm_tool lockdebug` fails as below:

"dlm_tool lockdebug ED0BD86DCE724393918A1AE8FDBF1EE3
can't open /sys/kernel/debug/dlm/ED0BD86DCE724393918A1AE8FDBF1EE3:
Operation not permitted"

This is because table_open() depends on file->f_op to tell which
seq_file ops should be passed down. But, the original file ops in
file->f_op is replaced by "debugfs_full_proxy_file_operations" with
commit 49d200de ("debugfs: prevent access to removed files'
private data").

Currently, I can think up 2 solutions: 1st, replace
debugfs_create_file() with debugfs_create_file_unsafe();
2nd, make different table_open#() accordingly. The 1st one
is neat, but I don't thoroughly understand its risk. Maybe
someone has a better one.
Signed-off-by: Eric Ren <zren@suse.com>
Signed-off-by: David Teigland <teigland@redhat.com>

We call mmc_req_is_special() after having processed a request, but
it could be freed after that. Check that ahead of time, and use
the cached value.
Reported-by: Hans de Goede <hdegoede@redhat.com>
Tested-by: Hans de Goede <hdegoede@redhat.com>
Fixes: c2df40df ("drivers: use req op accessor")
Signed-off-by: Jens Axboe <axboe@fb.com>

Merge tag 'asoc-fix-v4.8-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Fixes for v4.8

A clutch of fixes for v4.8.  These are mainly driver specific, the most
notable ones being those for OMAP which fix a series of issues that
broke boot on some platforms there when deferred probe kicked in.
There's also one core fix for an issue when unbinding a card which for
some reason had managed to not manifest until recently.

Send a zero length last streaming mode message for loopback
connections to synchronize between accepting QP and connecting QP.
This avoids data transfer to start on the accepting QP before
the connecting QP is in RTS. Also remove function i40iw_loopback_nop()
as it is no longer used.

Fixes: f27b4746 ("i40iw: add connection management code")
Signed-off-by: Tatyana Nikolova <tatyana.e.nikolova@intel.com>
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

This reverts commit 09954bad.

This reverts commit ff06db1e.

Calling freeze_bdev() twice on the same block device without mounted
filesystem get_super() will return NULL, which will lead to NULL-ptr
dereference later in drop_super().

Check get_super() result to fix that.

Note, that this is a purely theoretical issue. We have only 3
freeze_bdev() callers. 2 of them are in filesystem code and used on a
device with mounted fs. The third one in lock_fs() has protection in
upper-layer code against freezing block device the second time without
thawing it first.
Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>

Commit 44f714da ("Btrfs: improve performance on fsync against new
inode after rename/unlink"), which landed in 4.8-rc2, introduced a
possibility for a deadlock due to double locking of an inode's log mutex
by the same task, which lockdep reports with:

[23045.433975] =============================================
[23045.434748] [ INFO: possible recursive locking detected ]
[23045.435426] 4.7.0-rc6-btrfs-next-34+ #1 Not tainted
[23045.436044] ---------------------------------------------
[23045.436044] xfs_io/3688 is trying to acquire lock:
[23045.436044]  (&ei->log_mutex){+.+...}, at: [<ffffffffa038552d>] btrfs_log_inode+0x13a/0xc95 [btrfs]
[23045.436044]
               but task is already holding lock:
[23045.436044]  (&ei->log_mutex){+.+...}, at: [<ffffffffa038552d>] btrfs_log_inode+0x13a/0xc95 [btrfs]
[23045.436044]
               other info that might help us debug this:
[23045.436044]  Possible unsafe locking scenario:

[23045.436044]        CPU0
[23045.436044]        ----
[23045.436044]   lock(&ei->log_mutex);
[23045.436044]   lock(&ei->log_mutex);
[23045.436044]
                *** DEADLOCK ***

[23045.436044]  May be due to missing lock nesting notation

[23045.436044] 3 locks held by xfs_io/3688:
[23045.436044]  #0:  (&sb->s_type->i_mutex_key#15){+.+...}, at: [<ffffffffa035f2ae>] btrfs_sync_file+0x14e/0x425 [btrfs]
[23045.436044]  #1:  (sb_internal#2){.+.+.+}, at: [<ffffffff8118446b>] __sb_start_write+0x5f/0xb0
[23045.436044]  #2:  (&ei->log_mutex){+.+...}, at: [<ffffffffa038552d>] btrfs_log_inode+0x13a/0xc95 [btrfs]
[23045.436044]
               stack backtrace:
[23045.436044] CPU: 4 PID: 3688 Comm: xfs_io Not tainted 4.7.0-rc6-btrfs-next-34+ #1
[23045.436044] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.9.1-0-gb3ef39f-prebuilt.qemu-project.org 04/01/2014
[23045.436044]  0000000000000000 ffff88022f5f7860 ffffffff8127074d ffffffff82a54b70
[23045.436044]  ffffffff82a54b70 ffff88022f5f7920 ffffffff81092897 ffff880228015d68
[23045.436044]  0000000000000000 ffffffff82a54b70 ffffffff829c3f00 ffff880228015d68
[23045.436044] Call Trace:
[23045.436044]  [<ffffffff8127074d>] dump_stack+0x67/0x90
[23045.436044]  [<ffffffff81092897>] __lock_acquire+0xcbb/0xe4e
[23045.436044]  [<ffffffff8109155f>] ? mark_lock+0x24/0x201
[23045.436044]  [<ffffffff8109179a>] ? mark_held_locks+0x5e/0x74
[23045.436044]  [<ffffffff81092de0>] lock_acquire+0x12f/0x1c3
[23045.436044]  [<ffffffff81092de0>] ? lock_acquire+0x12f/0x1c3
[23045.436044]  [<ffffffffa038552d>] ? btrfs_log_inode+0x13a/0xc95 [btrfs]
[23045.436044]  [<ffffffffa038552d>] ? btrfs_log_inode+0x13a/0xc95 [btrfs]
[23045.436044]  [<ffffffff814a51a4>] mutex_lock_nested+0x77/0x3a7
[23045.436044]  [<ffffffffa038552d>] ? btrfs_log_inode+0x13a/0xc95 [btrfs]
[23045.436044]  [<ffffffffa039705e>] ? btrfs_release_delayed_node+0xb/0xd [btrfs]
[23045.436044]  [<ffffffffa038552d>] btrfs_log_inode+0x13a/0xc95 [btrfs]
[23045.436044]  [<ffffffffa038552d>] ? btrfs_log_inode+0x13a/0xc95 [btrfs]
[23045.436044]  [<ffffffff810a0ed1>] ? vprintk_emit+0x453/0x465
[23045.436044]  [<ffffffffa0385a61>] btrfs_log_inode+0x66e/0xc95 [btrfs]
[23045.436044]  [<ffffffffa03c084d>] log_new_dir_dentries+0x26c/0x359 [btrfs]
[23045.436044]  [<ffffffffa03865aa>] btrfs_log_inode_parent+0x4a6/0x628 [btrfs]
[23045.436044]  [<ffffffffa0387552>] btrfs_log_dentry_safe+0x5a/0x75 [btrfs]
[23045.436044]  [<ffffffffa035f464>] btrfs_sync_file+0x304/0x425 [btrfs]
[23045.436044]  [<ffffffff811acaf4>] vfs_fsync_range+0x8c/0x9e
[23045.436044]  [<ffffffff811acb22>] vfs_fsync+0x1c/0x1e
[23045.436044]  [<ffffffff811acc79>] do_fsync+0x31/0x4a
[23045.436044]  [<ffffffff811ace99>] SyS_fsync+0x10/0x14
[23045.436044]  [<ffffffff814a88e5>] entry_SYSCALL_64_fastpath+0x18/0xa8
[23045.436044]  [<ffffffff8108f039>] ? trace_hardirqs_off_caller+0x3f/0xaa

An example reproducer for this is:

   $ mkfs.btrfs -f /dev/sdb
   $ mount /dev/sdb /mnt
   $ mkdir /mnt/dir
   $ touch /mnt/dir/foo
   $ sync
   $ mv /mnt/dir/foo /mnt/dir/bar
   $ touch /mnt/dir/foo
   $ xfs_io -c "fsync" /mnt/dir/bar

This is because while logging the inode of file bar we end up logging its
parent directory (since its inode has an unlink_trans field matching the
current transaction id due to the rename operation), which in turn logs
the inodes for all its new dentries, so that the new inode for the new
file named foo gets logged which in turn triggered another logging attempt
for the inode we are fsync'ing, since that inode had an old name that
corresponds to the name of the new inode.

So fix this by ensuring that when logging the inode for a new dentry that
has a name matching an old name of some other inode, we don't log again
the original inode that we are fsync'ing.

Fixes: 44f714da ("Btrfs: improve performance on fsync against new inode after rename/unlink")
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>

Right now we treat leaf which has zero item as a valid one
because we could have an empty tree, that is, a root that is
also a leaf without any item, however, in the same case but
when the leaf is not a root, we can end up with hitting the
BUG_ON(1) in btrfs_extend_item() called by
setup_inline_extent_backref().

This makes us check the situation as a corruption if leaf is
not its own root.
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>

When btree node (level = 1) has nritems which equals to zero,
we can end up with panic due to insert_ptr()'s

BUG_ON(slot > nritems);

where slot is 1 and nritems is 0, as copy_for_split() calls
insert_ptr(.., path->slots[1] + 1, ...);

A invalid value results in the whole mess, this adds the check
for btree's node nritems so that we stop reading block when
when something is wrong.
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>

commit 909c3a22 (Btrfs: fix loading of orphan roots leading to BUG_ON)
avoids the BUG_ON but can add an aliased root to the dead_roots list or
leak the root.

Since we've already been loading roots into the radix tree, we should
use it before looking the root up on disk.

Cc: <stable@vger.kernel.org> # 4.5
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>

We need to call free_extent_map() on the em we look up.
Signed-off-by: Josef Bacik <jbacik@fb.com>
Reviewed-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>

At the end of unmount/dev-delete, if the device exclusive open is not
actually closed, then there might be a race with another program in
the userland who is trying to open the device in exclusive mode and
it may fail for eg:
      unmount /btrfs; fsck /dev/x
      btrfs dev del /dev/x /btrfs; fsck /dev/x
so here background blkdev_put() is not a choice
Signed-off-by: Anand Jain <Anand.Jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>

Function start_transaction() can return ERR_PTR(1) when flush is
BTRFS_RESERVE_FLUSH_LIMIT, so the call graph is

start_transaction (return ERR_PTR(1))
  -> btrfs_block_rsv_add (return 1)
     -> reserve_metadata_bytes (return 1)
        -> flush_space (return 1)
           -> do_chunk_alloc  (return 1)

With BTRFS_RESERVE_FLUSH_LIMIT, if flush_space is already on the
flush_state of ALLOC_CHUNK and it successfully allocates a new
chunk, then instead of trying to reserve space again,
reserve_metadata_bytes returns 1 immediately.

Eventually the callers who call start_transaction() usually just
do the IS_ERR() check which ERR_PTR(1) can pass, then it'll get
a panic when dereferencing a pointer which is ERR_PTR(1).

The following patch fixes the above problem.
"btrfs: flush_space: treat return value of do_chunk_alloc properly"
https://patchwork.kernel.org/patch/7778651/

This add comments to clarify do_chunk_alloc()'s return value.
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>

When running fstests generic/068, sometimes we got below deadlock:
  xfs_io          D ffff8800331dbb20     0  6697   6693 0x00000080
  ffff8800331dbb20 ffff88007acfc140 ffff880034d895c0 ffff8800331dc000
  ffff880032d243e8 fffffffeffffffff ffff880032d24400 0000000000000001
  ffff8800331dbb38 ffffffff816a9045 ffff880034d895c0 ffff8800331dbba8
  Call Trace:
  [<ffffffff816a9045>] schedule+0x35/0x80
  [<ffffffff816abab2>] rwsem_down_read_failed+0xf2/0x140
  [<ffffffff8118f5e1>] ? __filemap_fdatawrite_range+0xd1/0x100
  [<ffffffff8134f978>] call_rwsem_down_read_failed+0x18/0x30
  [<ffffffffa06631fc>] ? btrfs_alloc_block_rsv+0x2c/0xb0 [btrfs]
  [<ffffffff810d32b5>] percpu_down_read+0x35/0x50
  [<ffffffff81217dfc>] __sb_start_write+0x2c/0x40
  [<ffffffffa067f5d5>] start_transaction+0x2a5/0x4d0 [btrfs]
  [<ffffffffa067f857>] btrfs_join_transaction+0x17/0x20 [btrfs]
  [<ffffffffa068ba34>] btrfs_evict_inode+0x3c4/0x5d0 [btrfs]
  [<ffffffff81230a1a>] evict+0xba/0x1a0
  [<ffffffff812316b6>] iput+0x196/0x200
  [<ffffffffa06851d0>] btrfs_run_delayed_iputs+0x70/0xc0 [btrfs]
  [<ffffffffa067f1d8>] btrfs_commit_transaction+0x928/0xa80 [btrfs]
  [<ffffffffa0646df0>] btrfs_freeze+0x30/0x40 [btrfs]
  [<ffffffff81218040>] freeze_super+0xf0/0x190
  [<ffffffff81229275>] do_vfs_ioctl+0x4a5/0x5c0
  [<ffffffff81003176>] ? do_audit_syscall_entry+0x66/0x70
  [<ffffffff810038cf>] ? syscall_trace_enter_phase1+0x11f/0x140
  [<ffffffff81229409>] SyS_ioctl+0x79/0x90
  [<ffffffff81003c12>] do_syscall_64+0x62/0x110
  [<ffffffff816acbe1>] entry_SYSCALL64_slow_path+0x25/0x25

>From this warning, freeze_super() already holds SB_FREEZE_FS, but
btrfs_freeze() will call btrfs_commit_transaction() again, if
btrfs_commit_transaction() finds that it has delayed iputs to handle,
it'll start_transaction(), which will try to get SB_FREEZE_FS lock
again, then deadlock occurs.

The root cause is that in btrfs, sync_filesystem(sb) does not make
sure all metadata is updated. There still maybe some codes adding
delayed iputs, see below sample race window:

         CPU1                                  |         CPU2
|-> freeze_super()                             |
    |-> sync_filesystem(sb);                   |
    |                                          |-> cleaner_kthread()
    |                                          |   |-> btrfs_delete_unused_bgs()
    |                                          |       |-> btrfs_remove_chunk()
    |                                          |           |-> btrfs_remove_block_group()
    |                                          |               |-> btrfs_add_delayed_iput()
    |                                          |
    |-> sb->s_writers.frozen = SB_FREEZE_FS;   |
    |-> sb_wait_write(sb, SB_FREEZE_FS);       |
    |   acquire SB_FREEZE_FS lock.             |
    |                                          |
    |-> btrfs_freeze()                         |
        |-> btrfs_commit_transaction()         |
            |-> btrfs_run_delayed_iputs()      |
            |   will handle delayed iputs,     |
            |   that means start_transaction() |
            |   will be called, which will try |
            |   to get SB_FREEZE_FS lock.      |

To fix this issue, introduce a "int fs_frozen" to record internally whether
fs has been frozen. If fs has been frozen, we can not handle delayed iputs.
Signed-off-by: Wang Xiaoguang <wangxg.fnst@cn.fujitsu.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ add comment to btrfs_freeze ]
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>

This patch can fix some false ENOSPC errors, below test script can
reproduce one false ENOSPC error:
	#!/bin/bash
	dd if=/dev/zero of=fs.img bs=$((1024*1024)) count=128
	dev=$(losetup --show -f fs.img)
	mkfs.btrfs -f -M $dev
	mkdir /tmp/mntpoint
	mount $dev /tmp/mntpoint
	cd /tmp/mntpoint
	xfs_io -f -c "falloc 0 $((64*1024*1024))" testfile

Above script will fail for ENOSPC reason, but indeed fs still has free
space to satisfy this request. Please see call graph:
btrfs_fallocate()
|-> btrfs_alloc_data_chunk_ondemand()
|   bytes_may_use += 64M
|-> btrfs_prealloc_file_range()
    |-> btrfs_reserve_extent()
        |-> btrfs_add_reserved_bytes()
        |   alloc_type is RESERVE_ALLOC_NO_ACCOUNT, so it does not
        |   change bytes_may_use, and bytes_reserved += 64M. Now
        |   bytes_may_use + bytes_reserved == 128M, which is greater
        |   than btrfs_space_info's total_bytes, false enospc occurs.
        |   Note, the bytes_may_use decrease operation will be done in
        |   end of btrfs_fallocate(), which is too late.

Here is another simple case for buffered write:
                    CPU 1              |              CPU 2
                                       |
|-> cow_file_range()                   |-> __btrfs_buffered_write()
    |-> btrfs_reserve_extent()         |   |
    |                                  |   |
    |                                  |   |
    |    .....                         |   |-> btrfs_check_data_free_space()
    |                                  |
    |                                  |
    |-> extent_clear_unlock_delalloc() |

In CPU 1, btrfs_reserve_extent()->find_free_extent()->
btrfs_add_reserved_bytes() do not decrease bytes_may_use, the decrease
operation will be delayed to be done in extent_clear_unlock_delalloc().
Assume in this case, btrfs_reserve_extent() reserved 128MB data, CPU2's
btrfs_check_data_free_space() tries to reserve 100MB data space.
If
	100MB > data_sinfo->total_bytes - data_sinfo->bytes_used -
		data_sinfo->bytes_reserved - data_sinfo->bytes_pinned -
		data_sinfo->bytes_readonly - data_sinfo->bytes_may_use
btrfs_check_data_free_space() will try to allcate new data chunk or call
btrfs_start_delalloc_roots(), or commit current transaction in order to
reserve some free space, obviously a lot of work. But indeed it's not
necessary as long as decreasing bytes_may_use timely, we still have
free space, decreasing 128M from bytes_may_use.

To fix this issue, this patch chooses to update bytes_may_use for both
data and metadata in btrfs_add_reserved_bytes(). For compress path, real
extent length may not be equal to file content length, so introduce a
ram_bytes argument for btrfs_reserve_extent(), find_free_extent() and
btrfs_add_reserved_bytes(), it's becasue bytes_may_use is increased by
file content length. Then compress path can update bytes_may_use
correctly. Also now we can discard RESERVE_ALLOC_NO_ACCOUNT, RESERVE_ALLOC
and RESERVE_FREE.

As we know, usually EXTENT_DO_ACCOUNTING is used for error path. In
run_delalloc_nocow(), for inode marked as NODATACOW or extent marked as
PREALLOC, we also need to update bytes_may_use, but can not pass
EXTENT_DO_ACCOUNTING, because it also clears metadata reservation, so
here we introduce EXTENT_CLEAR_DATA_RESV flag to indicate btrfs_clear_bit_hook()
to update btrfs_space_info's bytes_may_use.

Meanwhile __btrfs_prealloc_file_range() will call
btrfs_free_reserved_data_space() internally for both sucessful and failed
path, btrfs_prealloc_file_range()'s callers does not need to call
btrfs_free_reserved_data_space() any more.
Signed-off-by: Wang Xiaoguang <wangxg.fnst@cn.fujitsu.com>
Reviewed-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>

This patch divides btrfs_update_reserved_bytes() into
btrfs_add_reserved_bytes() and btrfs_free_reserved_bytes(), and
next patch will extend btrfs_add_reserved_bytes（）to fix some
false ENOSPC error, please see later patch for detailed info.
Signed-off-by: Wang Xiaoguang <wangxg.fnst@cn.fujitsu.com>
Reviewed-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>

In prealloc_file_extent_cluster(), btrfs_check_data_free_space() uses
wrong file offset for reloc_inode, it uses cluster->start and cluster->end,
which indeed are extent's bytenr. The correct value should be
cluster->[start|end] minus block group's start bytenr.

start bytenr   cluster->start
|              |     extent      |   extent   | ...| extent |
|----------------------------------------------------------------|
|                block group reloc_inode                         |
Signed-off-by: Wang Xiaoguang <wangxg.fnst@cn.fujitsu.com>
Reviewed-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>

When doing log replay at mount time(after power loss), qgroup will leak
numbers of replayed data extents.

The cause is almost the same of balance.
So fix it by manually informing qgroup for owner changed extents.

The bug can be detected by btrfs/119 test case.

Cc: Mark Fasheh <mfasheh@suse.de>
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Reviewed-and-Tested-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>

This patch fixes a REGRESSION introduced in 4.2, caused by the big quota
rework.

When balancing data extents, qgroup will leak all its numbers for
relocated data extents.

The relocation is done in the following steps for data extents:
1) Create data reloc tree and inode
2) Copy all data extents to data reloc tree
   And commit transaction
3) Create tree reloc tree(special snapshot) for any related subvolumes
4) Replace file extent in tree reloc tree with new extents in data reloc
   tree
   And commit transaction
5) Merge tree reloc tree with original fs, by swapping tree blocks

For 1)~4), since tree reloc tree and data reloc tree doesn't count to
qgroup, everything is OK.

But for 5), the swapping of tree blocks will only info qgroup to track
metadata extents.

If metadata extents contain file extents, qgroup number for file extents
will get lost, leading to corrupted qgroup accounting.

The fix is, before commit transaction of step 5), manually info qgroup to
track all file extents in data reloc tree.
Since at commit transaction time, the tree swapping is done, and qgroup
will account these data extents correctly.

Cc: Mark Fasheh <mfasheh@suse.de>
Reported-by: Mark Fasheh <mfasheh@suse.de>
Reported-by: Filipe Manana <fdmanana@gmail.com>
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Tested-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>

Refactor btrfs_qgroup_insert_dirty_extent() function, to two functions:
1. btrfs_qgroup_insert_dirty_extent_nolock()
   Almost the same with original code.
   For delayed_ref usage, which has delayed refs locked.

   Change the return value type to int, since caller never needs the
   pointer, but only needs to know if they need to free the allocated
   memory.

2. btrfs_qgroup_insert_dirty_extent()
   The more encapsulated version.

   Will do the delayed_refs lock, memory allocation, quota enabled check
   and other things.

The original design is to keep exported functions to minimal, but since
more btrfs hacks exposed, like replacing path in balance, we need to
record dirty extents manually, so we have to add such functions.

Also, add comment for both functions, to info developers how to keep
qgroup correct when doing hacks.

Cc: Mark Fasheh <mfasheh@suse.de>
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Reviewed-and-Tested-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>

We wait on qgroup rescan completion in three places: file system
shutdown, the quota disable ioctl, and the rescan wait ioctl.  If the
user sends a signal while we're waiting, we continue happily along.  This
is expected behavior for the rescan wait ioctl.  It's racy in the shutdown
path but mostly works due to other unrelated synchronization points.
In the quota disable path, it Oopses the kernel pretty much immediately.

Cc: <stable@vger.kernel.org> # v4.4+
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>

The qgroup_flags field is overloaded such that it reflects the on-disk
status of qgroups and the runtime state.  The BTRFS_QGROUP_STATUS_FLAG_RESCAN
flag is used to indicate that a rescan operation is in progress, but if
the file system is unmounted while a rescan is running, the rescan
operation is paused.  If the file system is then mounted read-only,
the flag will still be present but the rescan operation will not have
been resumed.  When we go to umount, btrfs_qgroup_wait_for_completion
will see the flag and interpret it to mean that the rescan worker is
still running and will wait for a completion that will never come.

This patch uses a separate flag to indicate when the worker is
running.  The locking and state surrounding the qgroup rescan worker
needs a lot of attention beyond this patch but this is enough to
avoid a hung umount.

Cc: <stable@vger.kernel.org> # v4.4+
Signed-off-by; Jeff Mahoney <jeffm@suse.com>
Reviewed-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>

do_chunk_alloc returns 1 when it succeeds to allocate a new chunk.
But flush_space will not convert this to 0, and will also return 1.
As a result, reserve_metadata_bytes will think that flush_space failed,
and may potentially return this value "1" to the caller (depends how
reserve_metadata_bytes was called). The caller will also treat this as an error.
For example, btrfs_block_rsv_refill does:

int ret = -ENOSPC;
...
ret = reserve_metadata_bytes(root, block_rsv, num_bytes, flush);
if (!ret) {
        block_rsv_add_bytes(block_rsv, num_bytes, 0);
        return 0;
}

return ret;

So it will return -ENOSPC.
Signed-off-by: Alex Lyakas <alex@zadarastorage.com>
Reviewed-by: Josef Bacik <jbacik@fb.com>
Reviewed-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>

This adds several ASSERT()' s to report memory leak of block group cache.
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>

When over 1000 file extents refers to one extent, find_parent_nodes()
will be obviously slow, due to the O(n^2)~O(n^3) loops inside
__merge_refs().

The following ftrace shows the cubic growth of execution time:

256 refs
 5) + 91.768 us   |  __add_keyed_refs.isra.12 [btrfs]();
 5)   1.447 us    |  __add_missing_keys.isra.13 [btrfs]();
 5) ! 114.544 us  |  __merge_refs [btrfs]();
 5) ! 136.399 us  |  __merge_refs [btrfs]();

512 refs
 6) ! 279.859 us  |  __add_keyed_refs.isra.12 [btrfs]();
 6)   3.164 us    |  __add_missing_keys.isra.13 [btrfs]();
 6) ! 442.498 us  |  __merge_refs [btrfs]();
 6) # 2091.073 us |  __merge_refs [btrfs]();

and 1024 refs
 7) ! 368.683 us  |  __add_keyed_refs.isra.12 [btrfs]();
 7)   4.810 us    |  __add_missing_keys.isra.13 [btrfs]();
 7) # 2043.428 us |  __merge_refs [btrfs]();
 7) * 18964.23 us |  __merge_refs [btrfs]();

And sort them into the following char:
(Unit: us)
------------------------------------------------------------------------
 Trace function        | 256 ref        | 512 refs      | 1024 refs    |
------------------------------------------------------------------------
 __add_keyed_refs      | 91             | 249           | 368          |
 __add_missing_keys    | 1              | 3             | 4            |
 __merge_refs 1st call | 114            | 442           | 2043         |
 __merge_refs 2nd call | 136            | 2091          | 18964        |
------------------------------------------------------------------------

We can see the that __add_keyed_refs() grows almost in linear behavior.
And __add_missing_keys() in this case doesn't change much or takes much
time.

While for the 1st __merge_refs() it's square growth
for the 2nd __merge_refs() call it's cubic growth.

It's no doubt that merge_refs() will take a long long time to execute if
the number of refs continues its grows.

So add a cond_resced() into the loop of __merge_refs().

Although this will solve the problem of soft lockup, we need to use the
new rb_tree based structure introduced by Lu Fengqi to really solve the
long execution time.
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>

When some critical errors occur and FS would be flipped into RO,
if we have an on-going balance, we can end up with a memory leak
of root->reloc_root since btrfs_drop_snapshots() bails out
without freeing reloc_root at the very early start.

However, we're not able to free reloc_root in btrfs_drop_snapshots()
because its caller, merge_reloc_roots(), still needs to access it to
cleanup reloc_root's rbtree.

This makes us free reloc_root when we're going to free fs/file roots.
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>

Pull thermal fixes from Zhang Rui:

 - Fix cpu_cooling to have separate thermal_cooling_device_ops
   structures for cpus with and without power model, to avoid NULL
   dereference in cpufreq_state2power.  From Brendan Jackman.

 - Fix a possible NULL dereference in imx_thermal driver.  From Corentin
   LABBE.

 - Another two trivial fixes, one typo fix and one deleting module
   owner.  From Caesar Wang and Markus Elfring.

* 'for-rc' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux:
  thermal: imx: fix a possible NULL dereference
  thermal: trivial: fix the typo
  Thermal-INT3406: Delete owner assignment
  thermal: cpu_cooling: Fix NULL dereference in cpufreq_state2power

Commit e6047149 ("dm: use bio op accessors") switched DM over to
using bio_set_op_attrs() but didn't take care to initialize
lc->io_req.bi_op_flags in dm-log.c:rw_header().  This caused
rw_header()'s call to dm_io() to make bio->bi_op_flags be uninitialized
in dm-io.c:do_region(), which ultimately resulted in a SCSI BUG() in
sd_init_command().

Also, adjust rw_header() and its callers to use REQ_OP_{READ|WRITE}.

Fixes: e6047149 ("dm: use bio op accessors")
Signed-off-by: Heinz Mauelshagen <heinzm@redhat.com>
Reviewed-by: Shaun Tancheff <shaun.tancheff@seagate.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>

v4.8-rc3 commit 99f3c90d ("dm flakey: error READ bios during the
down_interval") overlooked the 'drop_writes' feature, which is meant to
allow reads to be issued rather than errored, during the down_interval.

Fixes: 99f3c90d ("dm flakey: error READ bios during the down_interval")
Reported-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Cc: stable@vger.kernel.org