- 18 Nov, 2016 40 commits
-
-
Sinan Kaya authored
commit 98756f53 upstream. Commit 103544d8 ("ACPI,PCI,IRQ: reduce resource requirements") replaced the addition of PIRQ_PENALTY_PCI_USING in acpi_pci_link_allocate() with an addition in acpi_irq_pci_sharing_penalty(), but f7eca374 ("ACPI,PCI,IRQ: separate ISA penalty calculation") removed the use of acpi_irq_pci_sharing_penalty() for ISA IRQs. Therefore, PIRQ_PENALTY_PCI_USING is missing from ISA IRQs used by interrupt links. Include that penalty by adding it in the acpi_pci_link_allocate() path. Fixes: f7eca374 (ACPI,PCI,IRQ: separate ISA penalty calculation) Signed-off-by:
Sinan Kaya <okaya@codeaurora.org> Acked-by:
Bjorn Helgaas <bhelgaas@google.com> Tested-by:
Jonathan Liu <net147@gmail.com> Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Sinan Kaya authored
commit f1caa61d upstream. Ondrej reported that IRQs stopped working in v4.7 on several platforms. A typical scenario, from Ondrej's VT82C694X/694X, is: ACPI: Using PIC for interrupt routing ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 *11 12 14 15) ACPI: No IRQ available for PCI Interrupt Link [LNKA] 8139too 0000:00:0f.0: PCI INT A: no GSI We're using PIC routing, so acpi_irq_balance == 0, and LNKA is already active at IRQ 11. In that case, acpi_pci_link_allocate() only tries to use the active IRQ (IRQ 11) which also happens to be the SCI. We should penalize the SCI by PIRQ_PENALTY_PCI_USING, but irq_get_trigger_type(11) returns something other than IRQ_TYPE_LEVEL_LOW, so we penalize it by PIRQ_PENALTY_ISA_ALWAYS instead, which makes acpi_pci_link_allocate() assume the IRQ isn't available and give up. Add acpi_penalize_sci_irq() so platforms can tell us the SCI IRQ, trigger, and polarity directly and we don't have to depend on irq_get_trigger_type(). Fixes: 103544d8 (ACPI,PCI,IRQ: reduce resource requirements) Link: http://lkml.kernel.org/r/201609251512.05657.linux@rainbow-software.orgReported-by:
Ondrej Zary <linux@rainbow-software.org> Acked-by:
-
Sinan Kaya authored
commit eeaed4bb upstream. We do not want to store the SCI penalty in the acpi_isa_irq_penalty[] table because acpi_isa_irq_penalty[] only holds ISA IRQ penalties and there's no guarantee that the SCI is an ISA IRQ. We add in the SCI penalty as a special case in acpi_irq_get_penalty(). But if we called acpi_penalize_isa_irq() or acpi_irq_penalty_update() for an SCI that happened to be an ISA IRQ, they stored the SCI penalty (part of the acpi_irq_get_penalty() return value) in acpi_isa_irq_penalty[]. Subsequent calls to acpi_irq_get_penalty() returned a penalty that included *two* SCI penalties. Fixes: 103544d8 (ACPI,PCI,IRQ: reduce resource requirements) Signed-off-by:
-
Punit Agrawal authored
commit 806487a8 upstream. Although ghes_proc() tests for errors while reading the error status, it always return success (0). Fix this by propagating the return value. Fixes: d334a491 (ACPI, APEI, Generic Hardware Error Source memory error support) Signed-of-by:
Punit Agrawal <punit.agrawa.@arm.com> Tested-by:
Tyler Baicar <tbaicar@codeaurora.org> Reviewed-by:
Borislav Petkov <bp@suse.de> [ rjw: Subject ] Signed-off-by:
-
Wei Yongjun authored
commit d1f63f0c upstream. Fix to return a negative error code from the platform_get_irq_byname() error handling case instead of 0, as done elsewhere in this function. Fixes: ad81d387 ("mmc: sdhci-msm: Add support for UHS cards") Signed-off-by:
Wei Yongjun <weiyongjun1@huawei.com> Acked-by:
Adrian Hunter <adrian.hunter@intel.com> Acked-by:
Georgi Djakov <georgi.djakov@linaro.org> Signed-off-by:
Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by:
-
Huaibin Wang authored
commit 599b076d upstream. Order of arguments is wrong. The wrong code has been introduced by commit 7d4f8d87, but is compiled only since commit 9df70b66. Note that this may break netlink dumps. Fixes: 9df70b66 ("i40e: Remove incorrect #ifdef's") Fixes: 7d4f8d87 ("switchdev; add VLAN support for port's bridge_getlink") CC: Carolyn Wyborny <carolyn.wyborny@intel.com> Signed-off-by:
Huaibin Wang <huaibin.wang@6wind.com> Signed-off-by:
Nicolas Dichtel <nicolas.dichtel@6wind.com> Tested-by:
Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by:
-
Andrew Lutomirski authored
commit 6d4952d9 upstream. hw_random carefully avoids using a stack buffer except in add_early_randomness(). This causes a crash in virtio_rng if CONFIG_VMAP_STACK=y. Reported-by:
Matt Mullins <mmullins@mmlx.us> Tested-by:
Andy Lutomirski <luto@kernel.org> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
Daniel Mentz authored
commit 62e931fa upstream. gen_pool_alloc_algo() iterates over the chunks of a pool trying to find a contiguous block of memory that satisfies the allocation request. The shortcut if (size > atomic_read(&chunk->avail)) continue; makes the loop skip over chunks that do not have enough bytes left to fulfill the request. There are two situations, though, where an allocation might still fail: (1) The available memory is not contiguous, i.e. the request cannot be fulfilled due to external fragmentation. (2) A race condition. Another thread runs the same code concurrently and is quicker to grab the available memory. In those situations, the loop calls pool->algo() to search the entire chunk, and pool->algo() returns some value that is >= end_bit to indicate that the search failed. This return value is then assigned to start_bit. The variables start_bit and end_bit describe the range that should be searched, and this range should be reset for every chunk that is searched. Today, the code fails to reset start_bit to 0. As a result, prefixes of subsequent chunks are ignored. Memory allocations might fail even though there is plenty of room left in these prefixes of those other chunks. Fixes: 7f184275 ("lib, Make gen_pool memory allocator lockless") Link: http://lkml.kernel.org/r/1477420604-28918-1-git-send-email-danielmentz@google.comSigned-off-by:
Daniel Mentz <danielmentz@google.com> Reviewed-by:
Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Acked-by:
Will Deacon <will.deacon@arm.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Heiko Carstens authored
commit d0208639 upstream. Before merging all different stack tracers the call traces printed had an indicator if an entry can be considered reliable or not. Unreliable entries were put in braces, reliable not. Currently all lines contain these extra braces. This patch restores the old behaviour by adding an extra "reliable" parameter to the callback functions. Only show_trace makes currently use of it. Before: [ 0.804751] Call Trace: [ 0.804753] ([<000000000017d0e0>] try_to_wake_up+0x318/0x5e0) [ 0.804756] ([<0000000000161d64>] create_worker+0x174/0x1c0) After: [ 0.804751] Call Trace: [ 0.804753] ([<000000000017d0e0>] try_to_wake_up+0x318/0x5e0) [ 0.804756] [<0000000000161d64>] create_worker+0x174/0x1c0 Fixes: 758d39eb ("s390/dumpstack: merge all four stack tracers") Signed-off-by:
Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by:
Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by:
-
Christophe JAILLET authored
commit 83ab7dad upstream. It is likely that checking the result of 'pcf2123_write_reg' is expected here. Also fix a small style issue. The '{' at the beginning of the function is misplaced. Fixes: 809b453b ("rtc: pcf2123: clean up writes to the rtc chip") Signed-off-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by:
Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by:
-
Javier Martinez Canillas authored
commit 34b89b29 upstream. If the driver is built as a module, autoload won't work because the module alias information is not filled. So user-space can't match the registered device with the corresponding module. Export the module alias information using the MODULE_DEVICE_TABLE() macro. Before this patch: $ modinfo drivers/clk/samsung/clk-exynos-audss.ko | grep alias alias: platform:exynos-audss-clk After this patch: $ modinfo drivers/clk/samsung/clk-exynos-audss.ko | grep alias alias: platform:exynos-audss-clk alias: of:N*T*Csamsung,exynos5420-audss-clockC* alias: of:N*T*Csamsung,exynos5420-audss-clock alias: of:N*T*Csamsung,exynos5410-audss-clockC* alias: of:N*T*Csamsung,exynos5410-audss-clock alias: of:N*T*Csamsung,exynos5250-audss-clockC* alias: of:N*T*Csamsung,exynos5250-audss-clock alias: of:N*T*Csamsung,exynos4210-audss-clockC* alias: of:N*T*Csamsung,exynos4210-audss-clock Fixes: 4d252fd5 ("clk: samsung: Allow modular build of the Audio Subsystem CLKCON driver") Signed-off-by:
Javier Martinez Canillas <javier@osg.samsung.com> Reviewed-by:
Krzysztof Kozlowski <krzk@kernel.org> Tested-by:
Stephen Boyd <sboyd@codeaurora.org> Signed-off-by:
-
Jan Beulich authored
commit a2209b74 upstream. Older GCC (observed with 4.1.x) doesn't support -Wno-override-init and also doesn't ignore unknown -Wno-* options. Signed-off-by:
Jan Beulich <jbeulich@suse.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Valdis Kletnieks <valdis.kletnieks@vt.edu> Cc: Valdis.Kletnieks@vt.edu Fixes: 5e44258d "x86/build: Reduce the W=1 warnings noise when compiling x86 syscall tables" Link: http://lkml.kernel.org/r/580E3E1C02000078001191C4@prv-mh.provo.novell.comSigned-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Chen-Yu Tsai authored
commit 59387683 upstream. struct clocksource is also used by the clk notifier callback, to unregister and re-register the clocksource with a different clock rate. clocksource_mmio_init does not pass back a pointer to the struct used, and the clk notifier callback assumes that the struct clocksource in struct sun5i_timer_clksrc is valid. This results in a kernel NULL pointer dereference when the hstimer clock is changed: Unable to handle kernel NULL pointer dereference at virtual address 00000004 [<c03a4678>] (clocksource_unbind) from [<c03a46d4>] (clocksource_unregister+0x2c/0x44) [<c03a46d4>] (clocksource_unregister) from [<c0a6f350>] (sun5i_rate_cb_clksrc+0x34/0x3c) [<c0a6f350>] (sun5i_rate_cb_clksrc) from [<c035ea50>] (notifier_call_chain+0x44/0x84) [<c035ea50>] (notifier_call_chain) from [<c035edc0>] (__srcu_notifier_call_chain+0x44/0x60) [<c035edc0>] (__srcu_notifier_call_chain) from [<c035edf4>] (srcu_notifier_call_chain+0x18/0x20) [<c035edf4>] (srcu_notifier_call_chain) from [<c0670174>] (__clk_notify+0x70/0x7c) [<c0670174>] (__clk_notify) from [<c06702c0>] (clk_propagate_rate_change+0xa4/0xc4) [<c06702c0>] (clk_propagate_rate_change) from [<c0670288>] (clk_propagate_rate_change+0x6c/0xc4) Revert the commit for now. clocksource_mmio_init can be made to pass back a pointer, but the code churn and usage of an inner struct might not be worth it. Fixes: 157dfade ("clocksource/drivers/timer_sun5i: Replace code by clocksource_mmio_init") Reported-by:
Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by:
Chen-Yu Tsai <wens@csie.org> Cc: linux-sunxi@googlegroups.com Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: linux-arm-kernel@lists.infradead.org Link: http://lkml.kernel.org/r/20161018054918.26855-1-wens@csie.orgSigned-off-by:
Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
-
Keith Busch authored
commit 70659060 upstream. The driver was decrementing the online_queues prior to attempting to delete those IO queues, so the driver ended up not requesting the controller delete any. This patch saves the online_queues prior to suspending them, and adds that parameter for deleting io queues. Fixes: c21377f8 ("nvme: Suspend all queues before deletion") Signed-off-by:
Keith Busch <keith.busch@intel.com> Reviewed-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
Jens Axboe <axboe@fb.com> Signed-off-by:
-
Chuck Lever authored
commit cace564f upstream. The ctxt's count field is overloaded to mean the number of pages in the ctxt->page array and the number of SGEs in the ctxt->sge array. Typically these two numbers are the same. However, when an inline RPC reply is constructed from an xdr_buf with a tail iovec, the head and tail often occupy the same page, but each are DMA mapped independently. In that case, ->count equals the number of pages, but it does not equal the number of SGEs. There's one more SGE, for the tail iovec. Hence there is one more DMA mapping than there are pages in the ctxt->page array. This isn't a real problem until the server's iommu is enabled. Then each RPC reply that has content in that iovec orphans a DMA mapping that consists of real resources. krb5i and krb5p always populate that tail iovec. After a couple million sent krb5i/p RPC replies, the NFS server starts behaving erratically. Reboot is needed to clear the problem. Fixes: 9d11b51c ("svcrdma: Fix send_reply() scatter/gather set-up") Signed-off-by:
Chuck Lever <chuck.lever@oracle.com> Signed-off-by:
J. Bruce Fields <bfields@redhat.com> Signed-off-by:
-
Chuck Lever authored
commit 9995237b upstream. Message from syslogd@klimt at Aug 18 17:00:37 ... kernel:page:ffffea0020639b00 count:0 mapcount:0 mapping: (null) index:0x0 Aug 18 17:00:37 klimt kernel: flags: 0x2fffff80000000() Aug 18 17:00:37 klimt kernel: page dumped because: VM_BUG_ON_PAGE(page_ref_count(page) == 0) Aug 18 17:00:37 klimt kernel: kernel BUG at /home/cel/src/linux/linux-2.6/include/linux/mm.h:445! Aug 18 17:00:37 klimt kernel: RIP: 0010:[<ffffffffa05c21c1>] svc_rdma_sendto+0x641/0x820 [rpcrdma] send_reply() assigns its page argument as the first page of ctxt. On error, send_reply() already invokes svc_rdma_put_context(ctxt, 1); which does a put_page() on that very page. No need to do that again as svc_rdma_sendto exits. Fixes: 3e1eeb98 ("svcrdma: Close connection when a send error occurs") Signed-off-by:
-
Alexander Usyskin authored
commit 582ab27a upstream. NFC version reply size checked against only header size, not against full message size. That may lead potentially to uninitialized memory access in version data. That leads to warnings when version data is accessed: drivers/misc/mei/bus-fixup.c: warning: '*((void *)&ver+11)' may be used uninitialized in this function [-Wuninitialized]: => 212:2 Reported in Build regressions/improvements in v4.9-rc3 https://lkml.org/lkml/2016/10/30/57 Fixes: 59fcd7c6 (mei: nfc: Initial nfc implementation) Signed-off-by:
Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by:
Tomas Winkler <tomas.winkler@intel.com> Signed-off-by:
-
Namhyung Kim authored
commit c6111523 upstream. Markus reported that 'perf top --hierarchy' cannot scroll down after refresh. This was because the number of entries are not updated when hierarchy is enabled. Unlike normal report view, hierarchy mode needs to keep its own entry count since it can have non-leaf entries which can expand/collapse. Reported-and-Tested-by:
Markus Trippelsdorf <markus@trippelsdorf.de> Signed-off-by:
Namhyung Kim <namhyung@kernel.org> Tested-by:
Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Fixes: f5b763fe ("perf hists browser: Count number of hierarchy entries") Link: http://lkml.kernel.org/r/20161007050412.3000-1-namhyung@kernel.orgSigned-off-by:
-
Guenter Roeck authored
commit 261d7794 upstream. Instantiating the rmi4 I2C transport driver without interrupts assigned (for example using manual i2c instantiation from the command line) caused the driver to fail to load, but it does not clean up its regulator or transport device registrations. Result is a crash at a later time, for example when rebooting the system. Fixes: 946c8432 ("Input: synaptics-rmi4 - support regulator supplies") Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by:
-
Guenter Roeck authored
commit bbc2ceeb upstream. Instantiating the rmi4 SPI transport driver without an interrupt assigned caused the driver to fail to load, but it does not clean up its transport device registration. Result may be a crash at a later time, for example when rebooting the system. Fixes: 8d99758d ("Input: synaptics-rmi4 - add SPI transport driver") Signed-off-by:
-
Guenter Roeck authored
commit 2e91838b upstream. Coverity reports: Passing argument 152UL /* sizeof (*wdd) */ to function __devres_alloc_node and then casting the return value to struct watchdog_device ** is suspicious. Allocation size needs to be sizeof(*rcwdd), not sizeof(*wdd). Fixes: 83fbae5a ("watchdog: Add a device managed API for ...") Cc: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by:
Neil Armstrong <narmstrong@baylibre.com> Signed-off-by:
Wim Van Sebroeck <wim@iguana.be> Signed-off-by:
-
Chris Wilson authored
commit 3497971a upstream. After we update one PTE for a page, the caller expects to be able to immediately use that through a GGTT read/write. To comply with the callers expectations we therefore need to flush the chipset buffers before returning. Reported-by:
Matti Hämäläinen <ccr@tnsp.org> Fixes: d6473f56 ("drm/i915: Add support for mapping an object page...") Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Cc: Ankitprasad Sharma <ankitprasad.r.sharma@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Tested-by:
Mika Kuoppala <mika.kuoppala@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20160818161718.27187-2-chris@chris-wilson.co.ukSigned-off-by:
-
Joerg Roedel authored
commit bea64033 upstream. It turns out that the disable_dmar_iommu() code-path tried to get the device_domain_lock recursivly, which will dead-lock when this code runs on dmar removal. Fix both code-paths that could lead to the dead-lock. Fixes: 55d94043 ('iommu/vt-d: Get rid of domain->iommu_lock') Signed-off-by:
Joerg Roedel <jroedel@suse.de> Signed-off-by:
-
Baoquan He authored
commit c3db901c upstream. The current code missed freeing domain id when free a domain of struct dma_ops_domain. Signed-off-by:
Baoquan He <bhe@redhat.com> Fixes: ec487d1a ('x86, AMD IOMMU: add domain allocation and deallocation functions') Signed-off-by:
-
Robin Murphy authored
commit 82db33dc upstream. On machines with no 32-bit addressable RAM whatsoever, we shouldn't even touch the v7s format as it's never going to work. Fixes: e5fc9753 ("iommu/io-pgtable: Add ARMv7 short descriptor support") Reported-by:
Eric Auger <eric.auger@redhat.com> Tested-by:
Robin Murphy <robin.murphy@arm.com> Signed-off-by:
-
Chuck Lever authored
commit 62bdf94a upstream. When a LOCALINV WR is flushed, the frmr is marked STALE, then frwr_op_unmap_sync DMA-unmaps the frmr's SGL. These STALE frmrs are then recovered when frwr_op_map hunts for an INVALID frmr to use. All other cases that need frmr recovery leave that SGL DMA-mapped. The FRMR recovery path unconditionally DMA-unmaps the frmr's SGL. To avoid DMA unmapping the SGL twice for flushed LOCAL_INV WRs, alter the recovery logic (rather than the hot frwr_op_unmap_sync path) to distinguish among these cases. This solution also takes care of the case where multiple LOCAL_INV WRs are issued for the same rpcrdma_req, some complete successfully, but some are flushed. Reported-by:
Vasco Steinmetz <linux@kyberraum.net> Signed-off-by:
Anna Schumaker <Anna.Schumaker@Netapp.com> Signed-off-by:
-
Daniel Wagner authored
commit 5690a22d upstream. There is only one waiter for the completion, therefore there is no need to use complete_all(). Let's make that clear by using complete() instead of complete_all(). The usage pattern of the completion is: waiter context waker context frwr_op_unmap_sync() reinit_completion() ib_post_send() wait_for_completion() frwr_wc_localinv_wake() complete() Signed-off-by:
Daniel Wagner <daniel.wagner@bmw-carit.de> Cc: Anna Schumaker <Anna.Schumaker@Netapp.com> Cc: Trond Myklebust <trond.myklebust@primarydata.com> Cc: Chuck Lever <chuck.lever@oracle.com> Cc: linux-nfs@vger.kernel.org Cc: netdev@vger.kernel.org Signed-off-by:
-
Christian König authored
commit c24784f0 upstream. Some fences might be alive even after we have stopped the scheduler leading to warnings about leaked objects from the SLUB allocator. Fix this by allocating/freeing the SLUB allocator from the module init/fini functions just like we do it for hw fences. v2: make variable static, add link to bug Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=97500Reported-by:
Grazvydas Ignotas <notasas@gmail.com> Signed-off-by:
Christian König <christian.koenig@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> (v1) Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
-
Grazvydas Ignotas authored
commit a053fb7e upstream. To free fences, call_rcu() is used, which calls amd_sched_fence_free() after a grace period. During teardown, there is no guarantee all callbacks have finished, so sched_fence_slab may be destroyed before all fences have been freed. If we are lucky, this results in some slab warnings, if not, we get a crash in one of rcu threads because callback is called after amdgpu has already been unloaded. Fix it with a rcu_barrier(). Fixes: 189e0fb7 ("drm/amdgpu: RCU protected amd_sched_fence_release") Acked-by:
Chunming Zhou <david1.zhou@amd.com> Reviewed-by:
-
Richard Genoud authored
commit 9bcffe75 upstream. After commit 1cf6e8fc ("tty/serial: at91: fix RTS line management when hardware handshake is enabled"), the hardware handshake wasn't functional anymore on Atmel platforms (beside SAMA5D2). To understand why, one has to understand the flag ATMEL_US_USMODE_HWHS first: Before commit 1cf6e8fc ("tty/serial: at91: fix RTS line management when hardware handshake is enabled"), this flag was never set. Thus, the CTS/RTS where only handled by serial_core (and everything worked just fine). This commit introduced the use of the ATMEL_US_USMODE_HWHS flag, enabling it for all boards when the user space enables flow control. When the ATMEL_US_USMODE_HWHS is set, the Atmel USART controller handles a part of the flow control job: - disable the transmitter when the CTS pin gets high. - drive the RTS pin high when the DMA buffer transfer is completed or PDC RX buffer full or RX FIFO is beyond threshold. (depending on the controller version). NB: This feature is *not* mandatory for the flow control to work. (Nevertheless, it's very useful if low latencies are needed.) Now, the specifics of the ATMEL_US_USMODE_HWHS flag: - For platforms with DMAC and no FIFOs (sam9x25, sam9x35, sama5D3, sama5D4, sam9g15, sam9g25, sam9g35)* this feature simply doesn't work. ( source: https://lkml.org/lkml/2016/9/7/598 ) Tested it on sam9g35, the RTS pins always stays up, even when RXEN=1 or a new DMA transfer descriptor is set. => ATMEL_US_USMODE_HWHS must not be used for those platforms - For platforms with a PDC (sam926{0,1,3}, sam9g10, sam9g20, sam9g45, sam9g46)*, there's another kind of problem. Once the flag ATMEL_US_USMODE_HWHS is set, the RTS pin can't be driven anymore via RTSEN/RTSDIS in USART Control Register. The RTS pin can only be driven by enabling/disabling the receiver or setting RCR=RNCR=0 in the PDC (Receive (Next) Counter Register). => Doing this is beyond the scope of this patch and could add other bugs, so the original (and working) behaviour should be set for those platforms (meaning ATMEL_US_USMODE_HWHS flag should be unset). - For platforms with a FIFO (sama5d2)*, the RTS pin is driven according to the RX FIFO thresholds, and can be also driven by RTSEN/RTSDIS in USART Control Register. No problem here. (This was the use case of commit 1cf6e8fc ("tty/serial: at91: fix RTS line management when hardware handshake is enabled")) NB: If the CTS pin declared as a GPIO in the DTS, (for instance cts-gpios = <&pioA PIN_PB31 GPIO_ACTIVE_LOW>), the transmitter will be disabled. => ATMEL_US_USMODE_HWHS flag can be set for this platform ONLY IF the CTS pin is not a GPIO. So, the only case when ATMEL_US_USMODE_HWHS can be enabled is when (atmel_use_fifo(port) && !mctrl_gpio_to_gpiod(atmel_port->gpios, UART_GPIO_CTS)) Tested on all Atmel USART controller flavours: AT91SAM9G35-CM (DMAC flavour), AT91SAM9G20-EK (PDC flavour), SAMA5D2xplained (FIFO flavour). * the list may not be exhaustive Fixes: 1cf6e8fc ("tty/serial: at91: fix RTS line management when hardware handshake is enabled") Signed-off-by:
Richard Genoud <richard.genoud@gmail.com> Acked-by:
Cyrille Pitchen <cyrille.pitchen@atmel.com> Acked-by:
Uwe Kleine-König <u.kleine-koenig@pengutronix.de> [nicolas.ferre@atmel.com: adapt to 4.4.x kernel for stable by adding the atmel_port variable declaration which was missing] Signed-off-by:
Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by:
-
Alex Deucher authored
commit 757124d9 upstream. On CZ/ST systems with AZ rather than ACP audio, we need to bail early in hw_fini since there is nothing to do. bug: https://bugs.freedesktop.org/show_bug.cgi?id=98276Signed-off-by:
-
Alex Deucher authored
commit 84b1528e upstream. If the platform does not support hybrid graphics or ATPX dGPU power control. Acked-by:
-
Dhinakaran Pandiyan authored
commit 61e0c543 upstream. According to BSpec, cdclk for BDW has to be not less than 432 MHz with DP audio enabled, port width x4, and link rate HBR2 (5.4 GHz). With cdclk less than 432 MHz, enabling audio leads to pipe FIFO underruns and displays cycling on/off. Let's apply this work around to GEN9 platforms too, as it fixes the same issue. v2: Move drm_device to drm_i915_private conversion Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=97907 Cc: Libin Yang <libin.yang@linux.intel.com> Signed-off-by:
Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Reviewed-by:
Jani Nikula <jani.nikula@intel.com> Signed-off-by:
-
Dhinakaran Pandiyan authored
commit fbb21c52 upstream. According to BSpec, cdclk for BDW has to be not less than 432 MHz with DP audio enabled, port width x4, and link rate HBR2 (5.4 GHz). With cdclk less than 432 MHz, enabling audio leads to pipe FIFO underruns and displays cycling on/off. From BSpec: "Display» BDW-SKL» dpr» [Register] DP_TP_CTL [BDW+,EXCLUDE(CHV)] Workaround : Do not use DisplayPort with CDCLK less than 432 MHz, audio enabled, port width x4, and link rate HBR2 (5.4 GHz), or else there may be audio corruption or screen corruption." Since, some DP configurations (e.g., MST) use port width x4 and HBR2 link rate, let's increase the cdclk to >= 432 MHz to enable audio for those cases. v4: Changed commit message v3: Combine BDW pixel rate adjustments into a function (Jani) v2: Restrict fix to BDW Retain the set cdclk across modesets (Ville) Signed-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by:
-
Ville Syrjälä authored
commit 8d83bc22 upstream. The VBT provides the platform a way to mix and match the DDI ports vs. GMBUS pins. Currently we only trust the VBT for DDI E, which I suppose has no standard GMBUS pin assignment. However, there are machines out there that use a non-standard mapping for the other ports as well. Let's start trusting the VBT on this one for all ports on DDI platforms. I've structured the code such that other platforms could easily start using this as well, by simply filling in the ddi_port_info. IIRC there may be CHV system that might actually need this. v2: Include a commit message, include a debug message during init Cc: Maarten Maathuis <madman2003@gmail.com> Tested-by:
Maarten Maathuis <madman2003@gmail.com> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=97877Signed-off-by:
Jim Bride <jim.bride@linux.intel.com> (cherry picked from commit e4ab73a1) Signed-off-by:
-
Alex Deucher authored
commit 066f1f0b upstream. If the platform does not support hybrid graphics or ATPX dGPU power control. bug: https://bugzilla.kernel.org/show_bug.cgi?id=51381Acked-by:
-
Andre Przywara authored
commit 112b0b8f upstream. In our VGIC implementation we limit the number of SPIs to a number that the userland application told us. Accordingly we limit the allocation of memory for virtual IRQs to that number. However in our MMIO dispatcher we didn't check if we ever access an IRQ beyond that limit, leading to out-of-bound accesses. Add a test against the number of allocated SPIs in check_region(). Adjust the VGIC_ADDR_TO_INT macro to avoid an actual division, which is not implemented on ARM(32). [maz: cleaned-up original patch] Reviewed-by:
Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by:
Andre Przywara <andre.przywara@arm.com> Signed-off-by:
Marc Zyngier <marc.zyngier@arm.com> Signed-off-by:
-
Bart Van Assche authored
commit df3d422c upstream. The code at the end of alua_rtpg_work() is as follows: scsi_device_put(sdev); kref_put(&pg->kref, release_port_group); In other words, alua_rtpg_queue() must hold an sdev reference and a pg reference before queueing rtpg work. If no rtpg work is queued no additional references should be held when alua_rtpg_queue() returns. If no rtpg work is queued, ensure that alua_rtpg_queue() only gives up the sdev reference if that reference was obtained by the same alua_rtpg_queue() call. Signed-off-by:
Bart Van Assche <bart.vanassche@sandisk.com> Reported-by:
Tang Junhui <tang.junhui@zte.com.cn> Cc: Hannes Reinecke <hare@suse.com> Cc: Tang Junhui <tang.junhui@zte.com.cn> Reviewed-by:
Hannes Reinecke <hare@suse.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
tang.junhui authored
commit 1fdd1427 upstream. Reference count of pg leaks in alua_rtpg_work() since kref_put() is not called to decrease the reference count of pg when the condition pg->rtpg_sdev==NULL satisfied (actually it is easy to satisfy), it would cause memory of pg leakage. Signed-off-by:
-
Sreekanth Reddy authored
commit 6d3a56ed upstream. While merging mpt3sas & mpt2sas code, we added the is_warpdrive check condition on the wrong line --------------------------------------------------------------------------- scsih_target_alloc(struct scsi_target *starget) sas_target_priv_data->handle = raid_device->handle; sas_target_priv_data->sas_address = raid_device->wwid; sas_target_priv_data->flags |= MPT_TARGET_FLAGS_VOLUME; - raid_device->starget = starget; + sas_target_priv_data->raid_device = raid_device; + if (ioc->is_warpdrive) + raid_device->starget = starget; } spin_unlock_irqrestore(&ioc->raid_device_lock, flags); return 0; ------------------------------------------------------------------------------ That check should be for the line sas_target_priv_data->raid_device = raid_device; Due to above hunk, we are not initializing raid_device's starget for raid volumes, and so during raid disk deletion driver is not calling scsi_remove_target() API as driver observes starget field of raid_device's structure as NULL. Signed-off-by:
Sreekanth Reddy <Sreekanth.Reddy@broadcom.com> Fixes: 7786ab6a ("mpt3sas: Ported WarpDrive product SSS6200 support") Signed-off-by:
-
