This patch converts bcm63xx_enet to uset get_sset_count
like the other drivers do.
Signed-off-by: Florian Fainelli <ffainelli@freebox.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>

commit 654d1f8a (packet: less dev_put() calls)
introduced a problem, calling potentially sleeping functions from a
rcu_read_lock() protected section.

Fix this by releasing lock before the sock_wmalloc()/memcpy_fromiovec() calls.

After skb allocation and copy from user space, we redo device
lookup and appropriate tests.
Reported-and-tested-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

It creates a regression, triggering badness for SYN_RECV
sockets, for example:

[19148.022102] Badness at net/ipv4/inet_connection_sock.c:293
[19148.022570] NIP: c02a0914 LR: c02a0904 CTR: 00000000
[19148.023035] REGS: eeecbd30 TRAP: 0700   Not tainted  (2.6.32)
[19148.023496] MSR: 00029032 <EE,ME,CE,IR,DR>  CR: 24002442  XER: 00000000
[19148.024012] TASK = eee9a820[1756] 'privoxy' THREAD: eeeca000

This is likely caused by the change in the 'estab' parameter
passed to tcp_parse_options() when invoked by the functions
in net/ipv4/tcp_minisocks.c

But even if that is fixed, the ->conn_request() changes made in
this patch series is fundamentally wrong.  They try to use the
listening socket's 'dst' to probe the route settings.  The
listening socket doesn't even have a route, and you can't
get the right route (the child request one) until much later
after we setup all of the state, and it must be done by hand.

This stuff really isn't ready, so the best thing to do is a
full revert.  This reverts the following commits:

f55017a9
022c3f7d
1aba721e
cda42ebd
345cda2f
dc343475
05eaade2
6a2a2d6bSigned-off-by: David S. Miller <davem@davemloft.net>

Make sure that any otherwise uninitialised fields of usvc are zero.

This has been obvserved to cause a problem whereby the port of
fwmark services may end up as a non-zero value which causes
scheduling of a destination server to fail for persisitent services.

As observed by Deon van der Merwe <dvdm@truteq.co.za>.
This fix suggested by Julian Anastasov <ja@ssi.bg>.

For good measure also zero udest.

Cc: Deon van der Merwe <dvdm@truteq.co.za>
Acked-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Simon Horman <horms@verge.net.au>
Cc: stable@kernel.org
Signed-off-by: Patrick McHardy <kaber@trash.net>

When fragments from bridge netfilter are passed to IPv4 or IPv6 conntrack
and a reassembly queue with the same fragment key already exists from
reassembling a similar packet received on a different device (f.i. with
multicasted fragments), the reassembled packet might continue on a different
codepath than where the head fragment originated. This can cause crashes
in bridge netfilter when a fragment received on a non-bridge device (and
thus with skb->nf_bridge == NULL) continues through the bridge netfilter
code.

Add a new reassembly identifier for packets originating from bridge
netfilter and use it to put those packets in insolated queues.

Fixes http://bugzilla.kernel.org/show_bug.cgi?id=14805Reported-and-Tested-by: Chong Qiao <qiaochong@loongson.cn>
Signed-off-by: Patrick McHardy <kaber@trash.net>

Currently the same reassembly queue might be used for packets reassembled
by conntrack in different positions in the stack (PREROUTING/LOCAL_OUT),
as well as local delivery. This can cause "packet jumps" when the fragment
completing a reassembled packet is queued from a different position in the
stack than the previous ones.

Add a "user" identifier to the reassembly queue key to seperate the queues
of each caller, similar to what we do for IPv4.
Signed-off-by: Patrick McHardy <kaber@trash.net>

Since power management is done by PCI subsystem as well as driver,
don't toggle the bit that disables PCI register writes.
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Acked-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: David S. Miller <davem@davemloft.net>

Off by one in name lookup makes Optima display as (chip 0xbc)
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

On Monday 14 December 2009, andrew hendry wrote:
> Thanks, I didn't know X.25 was actively maintained. I get bounces.
> Is the the maintainers out of date?

From looking at the posts on the x.25 mailing list and the changes
that went into the kernel during the last three years in that area,
I think it is safe to say that you are now the maintainer ;-).

The last mail on this topic from Henner Eisen was around 2001.

> AX.25 NETWORK LAYER
> M:      Ralf Baechle <ralf@linux-mips.org>
>
> X.25 NETWORK LAYER
> M:      Henner Eisen <eis@baty.hanse.de>

How about this change?
Signed-off-by: Andrew Hendry <andrew.hendry@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

commit 9d3a0de7 makes slaves expire as they would do on the master
with much shorter timeouts. But it introduces another problem:
When we close a connection, on master server the connection became
CLOSE_WAIT/TIME_WAIT, it was synced to slaves, but if master is
finished within it's timeouts (CLOSE), it will not be synced to
slaves. Then slaves will be kept on CLOSE_WAIT/TIME_WAIT until
timeout reaches. Thus we should also sync with CLOSE.

Cc: Wensong Zhang <wensong@linux-vs.org>
Cc: Simon Horman <horms@verge.net.au>
Cc: Julian Anastasov <ja@ssi.bg>
Cc: David S. Miller <davem@davemloft.net>
Signed-off-by: Xiaotian Feng <dfeng@redhat.com>
Acked-by: Simon Horman <horms@verge.net.au>
Signed-off-by: Patrick McHardy <kaber@trash.net>

For both .33 and .32-stable.
Signed-off-by: Jan Engelhardt <jengelh@medozas.de>
Cc: stable@kernel.org
Signed-off-by: Patrick McHardy <kaber@trash.net>

Add #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
Remove DRV_NAME from pr_<level>s
Consolidate long format strings
Remove some extra tab indents
Remove some unnecessary ()s from pr_<level>s arguments
Align pr_<level> arguments
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When building for Sun 3:

drivers/net/can/mcp251x.c:1074: undefined reference to `dma_free_coherent'
drivers/net/can/mcp251x.c:976: undefined reference to `dma_alloc_coherent'
drivers/net/can/mcp251x.c:1050: undefined reference to `dma_free_coherent'
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

sizeof(dev->dev_addr) is the size of a pointer.  A few lines above, the
size of this field is obtained using netdev->addr_len for a call to memcpy,
so do the same here.

A simplified version of the semantic patch that finds this problem is as
follows: (http://coccinelle.lip6.fr/)

// <smpl>
@@
expression *x;
expression f;
type T;
@@

*f(...,(T)x,...)
// </smpl>
Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: David S. Miller <davem@davemloft.net>

sizeof(dev->dev_addr) is the size of a pointer.  On the other hand,
sizeof(pdata->dev_addr) is the size of an array, so use that instead.

A simplified version of the semantic patch that finds this problem is as
follows: (http://coccinelle.lip6.fr/)

// <smpl>
@@
expression *x;
expression f;
type T;
@@

*f(...,(T)x,...)
// </smpl>
Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: David S. Miller <davem@davemloft.net>

The function efx_iterate_state contains the code
memcpy(&payload->msg, payload_msg, sizeof(payload_msg));
This is the only use of payload_msg.  The type of payload_msg is
changed from a pointer to an array, so that the result of sizeof really is
the length of the string.

A simplified version of the semantic patch that finds this problem is as
follows: (http://coccinelle.lip6.fr/)

// <smpl>
@@
expression *x;
expression f;
type T;
@@

*f(...,(T)x,...)
// </smpl>
Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: David S. Miller <davem@davemloft.net>

sizeof(TstSchedTbl) is just the size of the pointer.  Change it to the size
of the referenced data.

A simplified version of the semantic patch that finds this problem is as
follows: (http://coccinelle.lip6.fr/)

// <smpl>
@@
expression *x;
expression f;
type T;
@@

*f(...,(T)x,...)
// </smpl>
Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: David S. Miller <davem@davemloft.net>

3c574_cs, 3c589_cs:
	disable irq before calling el3_interrupt
	in the media_check function.
Signed-off-by: Ken Kawasaki <ken_kawasaki@spring.nifty.jp>
Signed-off-by: David S. Miller <davem@davemloft.net>

The return value should be negative.
Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

A valid CAN dataframe can have a data length code (DLC) of 0 .. 8 data bytes.

When reading the CAN controllers register the 4-bit value may contain values
from 0 .. 15 which may exceed the reserved space in the socket buffer!

The ISO 11898-1 Chapter 8.4.2.3 (DLC field) says that register values > 8
should be reduced to 8 without any error reporting or frame drop.

This patch introduces a new helper macro to cast a given 4-bit data length
code (dlc) to __u8 and ensure the DLC value to be max. 8 bytes.

The different handlings in the rx path of the CAN netdevice drivers are fixed.
Signed-off-by: Oliver Hartkopp <oliver@hartkopp.net>
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

I received some bug reports about userspace programs having problems
because after RTM_NEWLINK was received they could not immediate access
files under /proc/sys/net/ because they had not been registered yet.

The original problem was trivially fixed by moving the userspace
notification from rtnetlink_event() to the end of
register_netdevice().

When testing that change I discovered I was still getting RTM_NEWLINK
events before I could access proc and I was also getting RTM_NEWLINK
events after I was seeing RTM_DELLINK.  Things practically guaranteed
to confuse userspace.

After a little more investigation these extra notifications proved to
be from the new notifiers NETDEV_POST_INIT and NETDEV_UNREGISTER_BATCH
hitting the default case in rtnetlink_event, and triggering
unnecessary RTM_NEWLINK messages.

rtnetlink_event now explicitly handles NETDEV_UNREGISTER_BATCH and
NETDEV_POST_INIT to avoid sending the incorrect userspace
notifications.
Signed-off-by: Eric W. Biederman <ebiederm@aristanetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Now we can have a large udp hash table, udp_lib_get_port() loop
should be converted to a do {} while (cond) form,
or we dont enter it at all if hash table size is exactly 65536.
Reported-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

There are certain skews of the NIC which have multiple bits set in
adapter->cap.  Use & instead of == to process rx completions.
Signed-off-by: Ajit Khaparde <ajitk@serverengines.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

From: Alexander Duyck <alexander.h.duyck@intel.com>

This change makes it so that reset/interrupt storms can be avoided when
there are mailbox issues.  The new behavior is to only allow the device to
trigger mailbox related resets only once every 10 seconds.
Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch changes the handling of collisions between the use of the
PF/VF sides of the mailbox.
Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch removes a rare use of the USB power management API which
won't be supported after the conversion to the new generic runtime power
management framework. Functionality is not altered.
Signed-off-by: Oliver Neukum <oliver@neukum.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Conflicts:
	include/net/tcp.h

* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/davej/cpufreq:
  [ACPI/CPUFREQ] Introduce bios_limit per cpu cpufreq sysfs interface
  [CPUFREQ] make internal cpufreq_add_dev_* static
  [CPUFREQ] use an enum for speedstep processor identification
  [CPUFREQ] Document units for transition latency
  [CPUFREQ] Use global sysfs cpufreq structure for conservative governor tunings
  [CPUFREQ] Documentation: ABI: /sys/devices/system/cpu/cpu#/cpufreq/
  [CPUFREQ] powernow-k6: set transition latency value so ondemand governor can be used
  [CPUFREQ] cpumask: don't put a cpumask on the stack in x86...cpufreq/powernow-k8.c

The debug batman option needs to depend on the correct
config option.
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
[ "No means no!"  - Linus ]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6: (58 commits)
  tty: split the lock up a bit further
  tty: Move the leader test in disassociate
  tty: Push the bkl down a bit in the hangup code
  tty: Push the lock down further into the ldisc code
  tty: push the BKL down into the handlers a bit
  tty: moxa: split open lock
  tty: moxa: Kill the use of lock_kernel
  tty: moxa: Fix modem op locking
  tty: moxa: Kill off the throttle method
  tty: moxa: Locking clean up
  tty: moxa: rework the locking a bit
  tty: moxa: Use more tty_port ops
  tty: isicom: fix deadlock on shutdown
  tty: mxser: Use the new locking rules to fix setserial properly
  tty: mxser: use the tty_port_open method
  tty: isicom: sort out the board init logic
  tty: isicom: switch to the new tty_port_open helper
  tty: tty_port: Add a kref object to the tty port
  tty: istallion: tty port open/close methods
  tty: stallion: Convert to the tty_port_open/close methods
  ...

* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs-2.6: (21 commits)
  ext3: PTR_ERR return of wrong pointer in setup_new_group_blocks()
  ext3: Fix data / filesystem corruption when write fails to copy data
  ext4: Support for 64-bit quota format
  ext3: Support for vfsv1 quota format
  quota: Implement quota format with 64-bit space and inode limits
  quota: Move definition of QFMT_OCFS2 to linux/quota.h
  ext2: fix comment in ext2_find_entry about return values
  ext3: Unify log messages in ext3
  ext2: clear uptodate flag on super block I/O error
  ext2: Unify log messages in ext2
  ext3: make "norecovery" an alias for "noload"
  ext3: Don't update the superblock in ext3_statfs()
  ext3: journal all modifications in ext3_xattr_set_handle
  ext2: Explicitly assign values to on-disk enum of filetypes
  quota: Fix WARN_ON in lookup_one_len
  const: struct quota_format_ops
  ubifs: remove manual O_SYNC handling
  afs: remove manual O_SYNC handling
  kill wait_on_page_writeback_range
  vfs: Implement proper O_SYNC semantics
  ...

* 'for-linus' of git://oss.sgi.com/xfs/xfs:
  xfs: Fix error return for fallocate() on XFS
  xfs: cleanup dmapi macros in the umount path
  xfs: remove incorrect sparse annotation for xfs_iget_cache_miss
  xfs: kill the STATIC_INLINE macro
  xfs: uninline xfs_get_extsz_hint
  xfs: rename xfs_attr_fetch to xfs_attr_get_int
  xfs: simplify xfs_buf_get / xfs_buf_read interfaces
  xfs: remove IO_ISAIO
  xfs: Wrapped journal record corruption on read at recovery
  xfs: cleanup data end I/O handlers
  xfs: use WRITE_SYNC_PLUG for synchronous writeout
  xfs: reset the i_iolock lock class in the reclaim path
  xfs: I/O completion handlers must use NOFS allocations
  xfs: fix mmap_sem/iolock inversion in xfs_free_eofblocks
  xfs: simplify inode teardown

* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6: (235 commits)
  Staging: IIO: add selection of IIO_SW_RING to LIS3L02DQ as needed
  Staging: IIO: Add tsl2560-2 support to tsl2563 driver.
  Staging: IIO: Remove tsl2561 driver. Support merged with tsl2563.
  Staging: wlags49_h2: fix up signal levels
  + drivers-staging-wlags49_h2-remove-cvs-metadata.patch added to -mm tree
  Staging: samsung-laptop: add TODO file
  Staging: samsung-laptop: remove old kernel code
  Staging: add Samsung Laptop driver
  staging: batman-adv meshing protocol
  Staging: rtl8192u: depends on USB
  Staging: rtl8192u: remove dead code
  Staging: rtl8192u: remove bad whitespaces
  Staging: rtl8192u: make it compile
  Staging: Added Realtek rtl8192u driver to staging
  Staging: dream: add gpio and pmem support
  Staging: dream: add TODO file
  Staging: android: delete android drivers
  Staging: et131x: clean up the avail fields in the rx registers
  Staging: et131x: Clean up number fields
  Staging: et131x: kill RX_DMA_MAX_PKT_TIME
  ...

* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6: (27 commits)
  Driver core: fix race in dev_driver_string
  Driver Core: Early platform driver buffer
  sysfs: sysfs_setattr remove unnecessary permission check.
  sysfs: Factor out sysfs_rename from sysfs_rename_dir and sysfs_move_dir
  sysfs: Propagate renames to the vfs on demand
  sysfs: Gut sysfs_addrm_start and sysfs_addrm_finish
  sysfs: In sysfs_chmod_file lazily propagate the mode change.
  sysfs: Implement sysfs_getattr & sysfs_permission
  sysfs: Nicely indent sysfs_symlink_inode_operations
  sysfs: Update s_iattr on link and unlink.
  sysfs: Fix locking and factor out sysfs_sd_setattr
  sysfs: Simplify iattr time assignments
  sysfs: Simplify sysfs_chmod_file semantics
  sysfs: Use dentry_ops instead of directly playing with the dcache
  sysfs: Rename sysfs_d_iput to sysfs_dentry_iput
  sysfs: Update sysfs_setxattr so it updates secdata under the sysfs_mutex
  debugfs: fix create mutex racy fops and private data
  Driver core: Don't remove kobjects in device_shutdown.
  firmware_class: make request_firmware_nowait more useful
  Driver-Core: devtmpfs - set root directory mode to 0755
  ...

* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: (122 commits)
  USB: mos7840: add device IDs for B&B electronics devices
  USB: ftdi_sio: add USB device ID's for B&B Electronics line
  USB: musb: musb_host: fix sparse warning
  USB: musb: musb_gadget: fix sparse warning
  USB: musb: omap2430: fix sparse warning
  USB: core: message: fix sparse warning
  USB: core: hub: fix sparse warning
  USB: core: fix sparse warning for static function
  USB: Added USB_ETH_RNDIS to use instead of CONFIG_USB_ETH_RNDIS
  USB: Check bandwidth when switching alt settings.
  USB: Refactor code to find alternate interface settings.
  USB: xhci: Fix command completion after a drop endpoint.
  USB: xhci: Make reverting an alt setting "unfailable".
  USB: usbtmc: Use usb_clear_halt() instead of custom code.
  USB: xhci: Add correct email and files to MAINTAINERS entry.
  USB: ehci-omap.c: introduce missing kfree
  USB: xhci-mem.c: introduce missing kfree
  USB: add remove_id sysfs attr for usb drivers
  USB: g_multi kconfig: fix depends and help text
  USB: option: add pid for ZTE
  ...

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6:
  firewire: ohci: handle receive packets with a data length of zero

* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jwessel/linux-2.6-kgdb:
  kgdb: Always process the whole breakpoint list on activate or deactivate
  kgdb: continue and warn on signal passing from gdb
  kgdb,x86: do not set kgdb_single_step on x86
  kgdb: allow for cpu switch when single stepping
  kgdb,i386: Fix corner case access to ss with NMI watch dog exception
  kgdb: Replace strstr() by strchr() for single-character needles
  kgdbts: Read buffer overflow
  kgdb: Read buffer overflow
  kgdb,x86: remove redundant test

The tty count sanity check may need the BKL, that isn't clear. However it
is clear that the count use of the lock is internal and independant of the
bigger use of the lock.

Furthermore the file list locking is also separately locked already
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

There are two call points, both want to check that tty->signal->leader is
set. Move the test into disassociate_ctty() as that will make locking
changes easier in a bit
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>