- 21 Nov, 2018 1 commit
-
-
Robbie Ko authored
When doing an incremental send, due to the need of delaying directory move (rename) operations we can end up in infinite loop at apply_children_dir_moves(). An example scenario that triggers this problem is described below, where directory names correspond to the numbers of their respective inodes. Parent snapshot: . |--- 261/ |--- 271/ |--- 266/ |--- 259/ |--- 260/ | |--- 267 | |--- 264/ | |--- 258/ | |--- 257/ | |--- 265/ |--- 268/ |--- 269/ | |--- 262/ | |--- 270/ |--- 272/ | |--- 263/ | |--- 275/ | |--- 274/ |--- 273/ Send snapshot: . |-- 275/ |-- 274/ |-- 273/ |-- 262/ |-- 269/ |-- 258/ |-- 271/ |-- 268/ |-- 267/ |-- 270/ |-- 259/ | |-- 265/ | |-- 272/ |-- 257/ |-- 260/ |-- 264/ |-- 263/ |-- 261/ |-- 266/ When processing inode 257 we delay its move (rename) operation because its new parent in the send snapshot, inode 272, was not yet processed. Then when processing inode 272, we delay the move operation for that inode because inode 274 is its ancestor in the send snapshot. Finally we delay the move operation for inode 274 when processing it because inode 275 is its new parent in the send snapshot and was not yet moved. When finishing processing inode 275, we start to do the move operations that were previously delayed (at apply_children_dir_moves()), resulting in the following iterations: 1) We issue the move operation for inode 274; 2) Because inode 262 depended on the move operation of inode 274 (it was delayed because 274 is its ancestor in the send snapshot), we issue the move operation for inode 262; 3) We issue the move operation for inode 272, because it was delayed by inode 274 too (ancestor of 272 in the send snapshot); 4) We issue the move operation for inode 269 (it was delayed by 262); 5) We issue the move operation for inode 257 (it was delayed by 272); 6) We issue the move operation for inode 260 (it was delayed by 272); 7) We issue the move operation for inode 258 (it was delayed by 269); 8) We issue the move operation for inode 264 (it was delayed by 257); 9) We issue the move operation for inode 271 (it was delayed by 258); 10) We issue the move operation for inode 263 (it was delayed by 264); 11) We issue the move operation for inode 268 (it was delayed by 271); 12) We verify if we can issue the move operation for inode 270 (it was delayed by 271). We detect a path loop in the current state, because inode 267 needs to be moved first before we can issue the move operation for inode 270. So we delay again the move operation for inode 270, this time we will attempt to do it after inode 267 is moved; 13) We issue the move operation for inode 261 (it was delayed by 263); 14) We verify if we can issue the move operation for inode 266 (it was delayed by 263). We detect a path loop in the current state, because inode 270 needs to be moved first before we can issue the move operation for inode 266. So we delay again the move operation for inode 266, this time we will attempt to do it after inode 270 is moved (its move operation was delayed in step 12); 15) We issue the move operation for inode 267 (it was delayed by 268); 16) We verify if we can issue the move operation for inode 266 (it was delayed by 270). We detect a path loop in the current state, because inode 270 needs to be moved first before we can issue the move operation for inode 266. So we delay again the move operation for inode 266, this time we will attempt to do it after inode 270 is moved (its move operation was delayed in step 12). So here we added again the same delayed move operation that we added in step 14; 17) We attempt again to see if we can issue the move operation for inode 266, and as in step 16, we realize we can not due to a path loop in the current state due to a dependency on inode 270. Again we delay inode's 266 rename to happen after inode's 270 move operation, adding the same dependency to the empty stack that we did in steps 14 and 16. The next iteration will pick the same move dependency on the stack (the only entry) and realize again there is still a path loop and then again the same dependency to the stack, over and over, resulting in an infinite loop. So fix this by preventing adding the same move dependency entries to the stack by removing each pending move record from the red black tree of pending moves. This way the next call to get_pending_dir_moves() will not return anything for the current parent inode. A test case for fstests, with this reproducer, follows soon. Signed-off-by:Robbie Ko <robbieko@synology.com> Reviewed-by:
Filipe Manana <fdmanana@suse.com> [Wrote changelog with example and more clear explanation] Signed-off-by:
David Sterba <dsterba@suse.com>
-
- 14 Nov, 2018 1 commit
-
-
Filipe Manana authored
We were using the path name received from user space without checking that it is null terminated. While btrfs-progs is well behaved and does proper validation and null termination, someone could call the ioctl and pass a non-null terminated patch, leading to buffer overrun problems in the kernel. The ioctl is protected by CAP_SYS_ADMIN. So just set the last byte of the path to a null character, similar to what we do in other ioctls (add/remove/resize device, snapshot creation, etc). CC: stable@vger.kernel.org # 4.4+ Reviewed-by:
Anand Jain <anand.jain@oracle.com> Signed-off-by:
-
- 13 Nov, 2018 2 commits
-
-
Filipe Manana authored
After the simplification of the fast fsync patch done recently by commit b5e6c3e1 ("btrfs: always wait on ordered extents at fsync time") and commit e7175a69 ("btrfs: remove the wait ordered logic in the log_one_extent path"), we got a very short time window where we can get extents logged without writeback completing first or extents logged without logging the respective data checksums. Both issues can only happen when doing a non-full (fast) fsync. As soon as we enter btrfs_sync_file() we trigger writeback, then lock the inode and then wait for the writeback to complete before starting to log the inode. However before we acquire the inode's lock and after we started writeback, it's possible that more writes happened and dirtied more pages. If that happened and those pages get writeback triggered while we are logging the inode (for example, the VM subsystem triggering it due to memory pressure, or another concurrent fsync), we end up seeing the respective extent maps in the inode's list of modified extents and will log matching file extent items without waiting for the respective ordered extents to complete, meaning that either of the following will happen: 1) We log an extent after its writeback finishes but before its checksums are added to the csum tree, leading to -EIO errors when attempting to read the extent after a log replay. 2) We log an extent before its writeback finishes. Therefore after the log replay we will have a file extent item pointing to an unwritten extent (and without the respective data checksums as well). This could not happen before the fast fsync patch simplification, because for any extent we found in the list of modified extents, we would wait for its respective ordered extent to finish writeback or collect its checksums for logging if it did not complete yet. Fix this by triggering writeback again after acquiring the inode's lock and before waiting for ordered extents to complete. Fixes: e7175a69 ("btrfs: remove the wait ordered logic in the log_one_extent path") Fixes: b5e6c3e1 ("btrfs: always wait on ordered extents at fsync time") CC: stable@vger.kernel.org # 4.19+ Reviewed-by:
Josef Bacik <josef@toxicpanda.com> Signed-off-by:
-
Nikolay Borisov authored
When a metadata read is served the endio routine btree_readpage_end_io_hook is called which eventually runs the tree-checker. If tree-checker fails to validate the read eb then it sets EXTENT_BUFFER_CORRUPT flag. This leads to btree_read_extent_buffer_pages wrongly assuming that all available copies of this extent buffer are wrong and failing prematurely. Fix this modify btree_read_extent_buffer_pages to read all copies of the data. This failure was exhibitted in xfstests btrfs/124 which would spuriously fail its balance operations. The reason was that when balance was run following re-introduction of the missing raid1 disk __btrfs_map_block would map the read request to stripe 0, which corresponded to devid 2 (the disk which is being removed in the test): item 2 key (FIRST_CHUNK_TREE CHUNK_ITEM 3553624064) itemoff 15975 itemsize 112 length 1073741824 owner 2 stripe_len 65536 type DATA|RAID1 io_align 65536 io_width 65536 sector_size 4096 num_stripes 2 sub_stripes 1 stripe 0 devid 2 offset 2156920832 dev_uuid 8466c350-ed0c-4c3b-b17d-6379b445d5c8 stripe 1 devid 1 offset 3553624064 dev_uuid 1265d8db-5596-477e-af03-df08eb38d2ca This caused read requests for a checksum item that to be routed to the stale disk which triggered the aforementioned logic involving EXTENT_BUFFER_CORRUPT flag. This then triggered cascading failures of the balance operation. Fixes: a826d6dc ("Btrfs: check items for correctness as we search") CC: stable@vger.kernel.org # 4.4+ Suggested-by:Qu Wenruo <wqu@suse.com> Reviewed-by:
Nikolay Borisov <nborisov@suse.com> Signed-off-by:
-
- 07 Nov, 2018 1 commit
-
-
Omar Sandoval authored
There's a race between close_ctree() and cleaner_kthread(). close_ctree() sets btrfs_fs_closing(), and the cleaner stops when it sees it set, but this is racy; the cleaner might have already checked the bit and could be cleaning stuff. In particular, if it deletes unused block groups, it will create delayed iputs for the free space cache inodes. As of "btrfs: don't run delayed_iputs in commit", we're no longer running delayed iputs after a commit. Therefore, if the cleaner creates more delayed iputs after delayed iputs are run in btrfs_commit_super(), we will leak inodes on unmount and get a busy inode crash from the VFS. Fix it by parking the cleaner before we actually close anything. Then, any remaining delayed iputs will always be handled in btrfs_commit_super(). This also ensures that the commit in close_ctree() is really the last commit, so we can get rid of the commit in cleaner_kthread(). The fstest/generic/475 followed by 476 can trigger a crash that manifests as a slab corruption caused by accessing the freed kthread structure by a wake up function. Sample trace: [ 5657.077612] BUG: unable to handle kernel NULL pointer dereference at 00000000000000cc [ 5657.079432] PGD 1c57a067 P4D 1c57a067 PUD da10067 PMD 0 [ 5657.080661] Oops: 0000 [#1] PREEMPT SMP [ 5657.081592] CPU: 1 PID: 5157 Comm: fsstress Tainted: G W 4.19.0-rc8-default+ #323 [ 5657.083703] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.11.2-0-gf9626cc-prebuilt.qemu-project.org 04/01/2014 [ 5657.086577] RIP: 0010:shrink_page_list+0x2f9/0xe90 [ 5657.091937] RSP: 0018:ffffb5c745c8f728 EFLAGS: 00010287 [ 5657.092953] RAX: 0000000000000074 RBX: ffffb5c745c8f830 RCX: 0000000000000000 [ 5657.094590] RDX: 0000000000000000 RSI: 0000000000000001 RDI: ffff9a8747fdf3d0 [ 5657.095987] RBP: ffffb5c745c8f9e0 R08: 0000000000000000 R09: 0000000000000000 [ 5657.097159] R10: ffff9a8747fdf5e8 R11: 0000000000000000 R12: ffffb5c745c8f788 [ 5657.098513] R13: ffff9a877f6ff2c0 R14: ffff9a877f6ff2c8 R15: dead000000000200 [ 5657.099689] FS: 00007f948d853b80(0000) GS:ffff9a877d600000(0000) knlGS:0000000000000000 [ 5657.101032] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 5657.101953] CR2: 00000000000000cc CR3: 00000000684bd000 CR4: 00000000000006e0 [ 5657.103159] Call Trace: [ 5657.103776] shrink_inactive_list+0x194/0x410 [ 5657.104671] shrink_node_memcg.constprop.84+0x39a/0x6a0 [ 5657.105750] shrink_node+0x62/0x1c0 [ 5657.106529] try_to_free_pages+0x1a4/0x500 [ 5657.107408] __alloc_pages_slowpath+0x2c9/0xb20 [ 5657.108418] __alloc_pages_nodemask+0x268/0x2b0 [ 5657.109348] kmalloc_large_node+0x37/0x90 [ 5657.110205] __kmalloc_node+0x236/0x310 [ 5657.111014] kvmalloc_node+0x3e/0x70 Fixes: 30928e9b ("btrfs: don't run delayed_iputs in commit") Signed-off-by:
Omar Sandoval <osandov@fb.com> Reviewed-by:
-
- 06 Nov, 2018 8 commits
-
-
Filipe Manana authored
We currently allow cloning a range from a file which includes the last block of the file even if the file's size is not aligned to the block size. This is fine and useful when the destination file has the same size, but when it does not and the range ends somewhere in the middle of the destination file, it leads to corruption because the bytes between the EOF and the end of the block have undefined data (when there is support for discard/trimming they have a value of 0x00). Example: $ mkfs.btrfs -f /dev/sdb $ mount /dev/sdb /mnt $ export foo_size=$((256 * 1024 + 100)) $ xfs_io -f -c "pwrite -S 0x3c 0 $foo_size" /mnt/foo $ xfs_io -f -c "pwrite -S 0xb5 0 1M" /mnt/bar $ xfs_io -c "reflink /mnt/foo 0 512K $foo_size" /mnt/bar $ od -A d -t x1 /mnt/bar 0000000 b5 b5 b5 b5 b5 b5 b5 b5 b5 b5 b5 b5 b5 b5 b5 b5 * 0524288 3c 3c 3c 3c 3c 3c 3c 3c 3c 3c 3c 3c 3c 3c 3c 3c * 0786528 3c 3c 3c 3c 00 00 00 00 00 00 00 00 00 00 00 00 0786544 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 * 0790528 b5 b5 b5 b5 b5 b5 b5 b5 b5 b5 b5 b5 b5 b5 b5 b5 * 1048576 The bytes in the range from 786532 (512Kb + 256Kb + 100 bytes) to 790527 (512Kb + 256Kb + 4Kb - 1) got corrupted, having now a value of 0x00 instead of 0xb5. This is similar to the problem we had for deduplication that got recently fixed by commit de02b9f6 ("Btrfs: fix data corruption when deduplicating between different files"). Fix this by not allowing such operations to be performed and return the errno -EINVAL to user space. This is what XFS is doing as well at the VFS level. This change however now makes us return -EINVAL instead of -EOPNOTSUPP for cases where the source range maps to an inline extent and the destination range's end is smaller then the destination file's size, since the detection of inline extents is done during the actual process of dropping file extent items (at __btrfs_drop_extents()). Returning the -EINVAL error is done early on and solely based on the input parameters (offsets and length) and destination file's size. This makes us consistent with XFS and anyone else supporting cloning since this case is now checked at a higher level in the VFS and is where the -EINVAL will be returned from starting with kernel 4.20 (the VFS changed was introduced in 4.20-rc1 by commit 07d19dc9 ("vfs: avoid problematic remapping requests into partial EOF block"). So this change is more geared towards stable kernels, as it's unlikely the new VFS checks get removed intentionally. A test case for fstests follows soon, as well as an update to filter existing tests that expect -EOPNOTSUPP to accept -EINVAL as well. CC: <stable@vger.kernel.org> # 4.4+ Signed-off-by:
-
Filipe Manana authored
If we attempt to deduplicate the last block of a file A into the middle of a file B, and file A's size is not a multiple of the block size, we end rounding the deduplication length to 0 bytes, to avoid the data corruption issue fixed by commit de02b9f6 ("Btrfs: fix data corruption when deduplicating between different files"). However a length of zero will cause the insertion of an extent state with a start value greater (by 1) then the end value, leading to a corrupt extent state that will trigger a warning and cause chaos such as an infinite loop during inode eviction. Example trace: [96049.833585] ------------[ cut here ]------------ [96049.833714] WARNING: CPU: 0 PID: 24448 at fs/btrfs/extent_io.c:436 insert_state+0x101/0x120 [btrfs] [96049.833767] CPU: 0 PID: 24448 Comm: xfs_io Not tainted 4.19.0-rc7-btrfs-next-39 #1 [96049.833768] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.11.2-0-gf9626ccb91-prebuilt.qemu-project.org 04/01/2014 [96049.833780] RIP: 0010:insert_state+0x101/0x120 [btrfs] [96049.833783] RSP: 0018:ffffafd2c3707af0 EFLAGS: 00010282 [96049.833785] RAX: 0000000000000000 RBX: 000000000004dfff RCX: 0000000000000006 [96049.833786] RDX: 0000000000000007 RSI: ffff99045c143230 RDI: ffff99047b2168a0 [96049.833787] RBP: ffff990457851cd0 R08: 0000000000000001 R09: 0000000000000000 [96049.833787] R10: ffffafd2c3707ab8 R11: 0000000000000000 R12: ffff9903b93b12c8 [96049.833788] R13: 000000000004e000 R14: ffffafd2c3707b80 R15: ffffafd2c3707b78 [96049.833790] FS: 00007f5c14e7d700(0000) GS:ffff99047b200000(0000) knlGS:0000000000000000 [96049.833791] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [96049.833792] CR2: 00007f5c146abff8 CR3: 0000000115f4c004 CR4: 00000000003606f0 [96049.833795] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [96049.833796] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [96049.833796] Call Trace: [96049.833809] __set_extent_bit+0x46c/0x6a0 [btrfs] [96049.833823] lock_extent_bits+0x6b/0x210 [btrfs] [96049.833831] ? _raw_spin_unlock+0x24/0x30 [96049.833841] ? test_range_bit+0xdf/0x130 [btrfs] [96049.833853] lock_extent_range+0x8e/0x150 [btrfs] [96049.833864] btrfs_double_extent_lock+0x78/0xb0 [btrfs] [96049.833875] btrfs_extent_same_range+0x14e/0x550 [btrfs] [96049.833885] ? rcu_read_lock_sched_held+0x3f/0x70 [96049.833890] ? __kmalloc_node+0x2b0/0x2f0 [96049.833899] ? btrfs_dedupe_file_range+0x19a/0x280 [btrfs] [96049.833909] btrfs_dedupe_file_range+0x270/0x280 [btrfs] [96049.833916] vfs_dedupe_file_range_one+0xd9/0xe0 [96049.833919] vfs_dedupe_file_range+0x131/0x1b0 [96049.833924] do_vfs_ioctl+0x272/0x6e0 [96049.833927] ? __fget+0x113/0x200 [96049.833931] ksys_ioctl+0x70/0x80 [96049.833933] __x64_sys_ioctl+0x16/0x20 [96049.833937] do_syscall_64+0x60/0x1b0 [96049.833939] entry_SYSCALL_64_after_hwframe+0x49/0xbe [96049.833941] RIP: 0033:0x7f5c1478ddd7 [96049.833943] RSP: 002b:00007ffe15b196a8 EFLAGS: 00000202 ORIG_RAX: 0000000000000010 [96049.833945] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f5c1478ddd7 [96049.833946] RDX: 00005625ece322d0 RSI: 00000000c0189436 RDI: 0000000000000004 [96049.833947] RBP: 0000000000000000 R08: 00007f5c14a46f48 R09: 0000000000000040 [96049.833948] R10: 0000000000000541 R11: 0000000000000202 R12: 0000000000000000 [96049.833949] R13: 0000000000000000 R14: 0000000000000004 R15: 00005625ece322d0 [96049.833954] irq event stamp: 6196 [96049.833956] hardirqs last enabled at (6195): [<ffffffff91b00663>] console_unlock+0x503/0x640 [96049.833958] hardirqs last disabled at (6196): [<ffffffff91a037dd>] trace_hardirqs_off_thunk+0x1a/0x1c [96049.833959] softirqs last enabled at (6114): [<ffffffff92600370>] __do_softirq+0x370/0x421 [96049.833964] softirqs last disabled at (6095): [<ffffffff91a8dd4d>] irq_exit+0xcd/0xe0 [96049.833965] ---[ end trace db7b05f01b7fa10c ]--- [96049.935816] R13: 0000000000000000 R14: 00005562e5259240 R15: 00007ffff092b910 [96049.935822] irq event stamp: 6584 [96049.935823] hardirqs last enabled at (6583): [<ffffffff91b00663>] console_unlock+0x503/0x640 [96049.935825] hardirqs last disabled at (6584): [<ffffffff91a037dd>] trace_hardirqs_off_thunk+0x1a/0x1c [96049.935827] softirqs last enabled at (6328): [<ffffffff92600370>] __do_softirq+0x370/0x421 [96049.935828] softirqs last disabled at (6313): [<ffffffff91a8dd4d>] irq_exit+0xcd/0xe0 [96049.935829] ---[ end trace db7b05f01b7fa123 ]--- [96049.935840] ------------[ cut here ]------------ [96049.936065] WARNING: CPU: 1 PID: 24463 at fs/btrfs/extent_io.c:436 insert_state+0x101/0x120 [btrfs] [96049.936107] CPU: 1 PID: 24463 Comm: umount Tainted: G W 4.19.0-rc7-btrfs-next-39 #1 [96049.936108] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.11.2-0-gf9626ccb91-prebuilt.qemu-project.org 04/01/2014 [96049.936117] RIP: 0010:insert_state+0x101/0x120 [btrfs] [96049.936119] RSP: 0018:ffffafd2c3637bc0 EFLAGS: 00010282 [96049.936120] RAX: 0000000000000000 RBX: 000000000004dfff RCX: 0000000000000006 [96049.936121] RDX: 0000000000000007 RSI: ffff990445cf88e0 RDI: ffff99047b2968a0 [96049.936122] RBP: ffff990457851cd0 R08: 0000000000000001 R09: 0000000000000000 [96049.936123] R10: ffffafd2c3637b88 R11: 0000000000000000 R12: ffff9904574301e8 [96049.936124] R13: 000000000004e000 R14: ffffafd2c3637c50 R15: ffffafd2c3637c48 [96049.936125] FS: 00007fe4b87e72c0(0000) GS:ffff99047b280000(0000) knlGS:0000000000000000 [96049.936126] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [96049.936128] CR2: 00005562e52618d8 CR3: 00000001151c8005 CR4: 00000000003606e0 [96049.936129] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [96049.936131] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [96049.936131] Call Trace: [96049.936141] __set_extent_bit+0x46c/0x6a0 [btrfs] [96049.936154] lock_extent_bits+0x6b/0x210 [btrfs] [96049.936167] btrfs_evict_inode+0x1e1/0x5a0 [btrfs] [96049.936172] evict+0xbf/0x1c0 [96049.936174] dispose_list+0x51/0x80 [96049.936176] evict_inodes+0x193/0x1c0 [96049.936180] generic_shutdown_super+0x3f/0x110 [96049.936182] kill_anon_super+0xe/0x30 [96049.936189] btrfs_kill_super+0x13/0x100 [btrfs] [96049.936191] deactivate_locked_super+0x3a/0x70 [96049.936193] cleanup_mnt+0x3b/0x80 [96049.936195] task_work_run+0x93/0xc0 [96049.936198] exit_to_usermode_loop+0xfa/0x100 [96049.936201] do_syscall_64+0x17f/0x1b0 [96049.936202] entry_SYSCALL_64_after_hwframe+0x49/0xbe [96049.936204] RIP: 0033:0x7fe4b80cfb37 [96049.936206] RSP: 002b:00007ffff092b688 EFLAGS: 00000246 ORIG_RAX: 00000000000000a6 [96049.936207] RAX: 0000000000000000 RBX: 00005562e5259060 RCX: 00007fe4b80cfb37 [96049.936208] RDX: 0000000000000001 RSI: 0000000000000000 RDI: 00005562e525faa0 [96049.936209] RBP: 00005562e525faa0 R08: 00005562e525f770 R09: 0000000000000015 [96049.936210] R10: 00000000000006b4 R11: 0000000000000246 R12: 00007fe4b85d1e64 [96049.936211] R13: 0000000000000000 R14: 00005562e5259240 R15: 00007ffff092b910 [96049.936211] R13: 0000000000000000 R14: 00005562e5259240 R15: 00007ffff092b910 [96049.936216] irq event stamp: 6616 [96049.936219] hardirqs last enabled at (6615): [<ffffffff91b00663>] console_unlock+0x503/0x640 [96049.936219] hardirqs last disabled at (6616): [<ffffffff91a037dd>] trace_hardirqs_off_thunk+0x1a/0x1c [96049.936222] softirqs last enabled at (6328): [<ffffffff92600370>] __do_softirq+0x370/0x421 [96049.936222] softirqs last disabled at (6313): [<ffffffff91a8dd4d>] irq_exit+0xcd/0xe0 [96049.936223] ---[ end trace db7b05f01b7fa124 ]--- The second stack trace, from inode eviction, is repeated forever due to the infinite loop during eviction. This is the same type of problem fixed way back in 2015 by commit 113e8283 ("Btrfs: fix inode eviction infinite loop after extent_same ioctl") and commit ccccf3d6 ("Btrfs: fix inode eviction infinite loop after cloning into it"). So fix this by returning immediately if the deduplication range length gets rounded down to 0 bytes, as there is nothing that needs to be done in such case. Example reproducer: $ mkfs.btrfs -f /dev/sdb $ mount /dev/sdb /mnt $ xfs_io -f -c "pwrite -S 0xe6 0 100" /mnt/foo $ xfs_io -f -c "pwrite -S 0xe6 0 1M" /mnt/bar # Unmount the filesystem and mount it again so that we start without any # extent state records when we ask for the deduplication. $ umount /mnt $ mount /dev/sdb /mnt $ xfs_io -c "dedupe /mnt/foo 0 500K 100" /mnt/bar # This unmount triggers the infinite loop. $ umount /mnt A test case for fstests will follow soon. Fixes: de02b9f6 ("Btrfs: fix data corruption when deduplicating between different files") CC: <stable@vger.kernel.org> # 4.19+ Reviewed-by:
-
Filipe Manana authored
When we are writing out a free space cache, during the transaction commit phase, we can end up in a deadlock which results in a stack trace like the following: schedule+0x28/0x80 btrfs_tree_read_lock+0x8e/0x120 [btrfs] ? finish_wait+0x80/0x80 btrfs_read_lock_root_node+0x2f/0x40 [btrfs] btrfs_search_slot+0xf6/0x9f0 [btrfs] ? evict_refill_and_join+0xd0/0xd0 [btrfs] ? inode_insert5+0x119/0x190 btrfs_lookup_inode+0x3a/0xc0 [btrfs] ? kmem_cache_alloc+0x166/0x1d0 btrfs_iget+0x113/0x690 [btrfs] __lookup_free_space_inode+0xd8/0x150 [btrfs] lookup_free_space_inode+0x5b/0xb0 [btrfs] load_free_space_cache+0x7c/0x170 [btrfs] ? cache_block_group+0x72/0x3b0 [btrfs] cache_block_group+0x1b3/0x3b0 [btrfs] ? finish_wait+0x80/0x80 find_free_extent+0x799/0x1010 [btrfs] btrfs_reserve_extent+0x9b/0x180 [btrfs] btrfs_alloc_tree_block+0x1b3/0x4f0 [btrfs] __btrfs_cow_block+0x11d/0x500 [btrfs] btrfs_cow_block+0xdc/0x180 [btrfs] btrfs_search_slot+0x3bd/0x9f0 [btrfs] btrfs_lookup_inode+0x3a/0xc0 [btrfs] ? kmem_cache_alloc+0x166/0x1d0 btrfs_update_inode_item+0x46/0x100 [btrfs] cache_save_setup+0xe4/0x3a0 [btrfs] btrfs_start_dirty_block_groups+0x1be/0x480 [btrfs] btrfs_commit_transaction+0xcb/0x8b0 [btrfs] At cache_save_setup() we need to update the inode item of a block group's cache which is located in the tree root (fs_info->tree_root), which means that it may result in COWing a leaf from that tree. If that happens we need to find a free metadata extent and while looking for one, if we find a block group which was not cached yet we attempt to load its cache by calling cache_block_group(). However this function will try to load the inode of the free space cache, which requires finding the matching inode item in the tree root - if that inode item is located in the same leaf as the inode item of the space cache we are updating at cache_save_setup(), we end up in a deadlock, since we try to obtain a read lock on the same extent buffer that we previously write locked. So fix this by using the tree root's commit root when searching for a block group's free space cache inode item when we are attempting to load a free space cache. This is safe since block groups once loaded stay in memory forever, as well as their caches, so after they are first loaded we will never need to read their inode items again. For new block groups, once they are created they get their ->cached field set to BTRFS_CACHE_FINISHED meaning we will not need to read their inode item. Reported-by:
Andrew Nelson <andrew.s.nelson@gmail.com> Link: https://lore.kernel.org/linux-btrfs/CAPTELenq9x5KOWuQ+fa7h1r3nsJG8vyiTH8+ifjURc_duHh2Wg@mail.gmail.com/ Fixes: 9d66e233 ("Btrfs: load free space cache if it exists") Tested-by:
-
Arnd Bergmann authored
Note: this patch fixes a problem in a feature outside of btrfs ("kernel hacking: add a config option to disable compiler auto-inlining") and is applied ahead of time due to cross-subsystem dependencies. On 32-bit ARM with gcc-8, I see a link error with the addition of the CONFIG_NO_AUTO_INLINE option: fs/btrfs/super.o: In function `btrfs_statfs': super.c:(.text+0x67b8): undefined reference to `__aeabi_uldivmod' super.c:(.text+0x67fc): undefined reference to `__aeabi_uldivmod' super.c:(.text+0x6858): undefined reference to `__aeabi_uldivmod' super.c:(.text+0x6920): undefined reference to `__aeabi_uldivmod' super.c:(.text+0x693c): undefined reference to `__aeabi_uldivmod' fs/btrfs/super.o:super.c:(.text+0x6958): more undefined references to `__aeabi_uldivmod' follow So far this is the only file that shows the behavior, so I'd propose to just work around it by marking the functions as 'static inline' that normally get inlined here. The reference to __aeabi_uldivmod comes from a div_u64() which has an optimization for a constant division that uses a straight '/' operator when the result should be known to the compiler. My interpretation is that as we turn off inlining, gcc still expects the result to be constant but fails to use that constant value. Link: https://lkml.kernel.org/r/20181103153941.1881966-1-arnd@arndb.deReviewed-by:Changbin Du <changbin.du@gmail.com> Signed-off-by:
Arnd Bergmann <arnd@arndb.de> [ add the note ] Signed-off-by:
-
Shaokun Zhang authored
block_group_err shows the group system as a decimal value with a '0x' prefix, which is somewhat misleading. Fix it to print hexadecimal, as was intended. Fixes: fce466ea ("btrfs: tree-checker: Verify block_group_item") CC: stable@vger.kernel.org # 4.19+ Reviewed-by:
Shaokun Zhang <zhangshaokun@hisilicon.com> Reviewed-by:
-
Filipe Manana authored
Recently we got a massive simplification for fsync, where for the fast path we no longer log new extents while their respective ordered extents are still running. However that simplification introduced a subtle regression for the case where we use a ranged fsync (msync). Consider the following example: CPU 0 CPU 1 mmap write to range [2Mb, 4Mb[ mmap write to range [512Kb, 1Mb[ msync range [512K, 1Mb[ --> triggers fast fsync (BTRFS_INODE_NEEDS_FULL_SYNC not set) --> creates extent map A for this range and adds it to list of modified extents --> starts ordered extent A for this range --> waits for it to complete writeback triggered for range [2Mb, 4Mb[ --> create extent map B and adds it to the list of modified extents --> creates ordered extent B --> start looking for and logging modified extents --> logs extent maps A and B --> finds checksums for extent A in the csum tree, but not for extent B fsync (msync) finishes --> ordered extent B finishes and its checksums are added to the csum tree <power cut> After replaying the log, we have the extent covering the range [2Mb, 4Mb[ but do not have the data checksum items covering that file range. This happens because at the very beginning of an fsync (btrfs_sync_file()) we start and wait for IO in the given range [512Kb, 1Mb[ and therefore wait for any ordered extents in that range to complete before we start logging the extents. However if right before we start logging the extent in our range [512Kb, 1Mb[, writeback is started for any other dirty range, such as the range [2Mb, 4Mb[ due to memory pressure or a concurrent fsync or msync (btrfs_sync_file() starts writeback before acquiring the inode's lock), an ordered extent is created for that other range and a new extent map is created to represent that range and added to the inode's list of modified extents. That means that we will see that other extent in that list when collecting extents for logging (done at btrfs_log_changed_extents()) and log the extent before the respective ordered extent finishes - namely before the checksum items are added to the checksums tree, which is where log_extent_csums() looks for the checksums, therefore making us log an extent without logging its checksums. Before that massive simplification of fsync, this wasn't a problem because besides looking for checkums in the checksums tree, we also looked for them in any ordered extent still running. The consequence of data checksums missing for a file range is that users attempting to read the affected file range will get -EIO errors and dmesg reports the following: [10188.358136] BTRFS info (device sdc): no csum found for inode 297 start 57344 [10188.359278] BTRFS warning (device sdc): csum failed root 5 ino 297 off 57344 csum 0x98f94189 expected csum 0x00000000 mirror 1 So fix this by skipping extents outside of our logging range at btrfs_log_changed_extents() and leaving them on the list of modified extents so that any subsequent ranged fsync may collect them if needed. Also, if we find a hole extent outside of the range still log it, just to prevent having gaps between extent items after replaying the log, otherwise fsck will complain when we are not using the NO_HOLES feature (fstest btrfs/056 triggers such case). Fixes: e7175a69 ("btrfs: remove the wait ordered logic in the log_one_extent path") CC: stable@vger.kernel.org # 4.19+ Reviewed-by: -
Lu Fengqi authored
When running generic/475, we may get the following warning in dmesg: [ 6902.102154] WARNING: CPU: 3 PID: 18013 at fs/btrfs/extent-tree.c:9776 btrfs_free_block_groups+0x2af/0x3b0 [btrfs] [ 6902.109160] CPU: 3 PID: 18013 Comm: umount Tainted: G W O 4.19.0-rc8+ #8 [ 6902.110971] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015 [ 6902.112857] RIP: 0010:btrfs_free_block_groups+0x2af/0x3b0 [btrfs] [ 6902.118921] RSP: 0018:ffffc9000459bdb0 EFLAGS: 00010286 [ 6902.120315] RAX: ffff880175050bb0 RBX: ffff8801124a8000 RCX: 0000000000170007 [ 6902.121969] RDX: 0000000000000002 RSI: 0000000000170007 RDI: ffffffff8125fb74 [ 6902.123716] RBP: ffff880175055d10 R08: 0000000000000000 R09: 0000000000000000 [ 6902.125417] R10: 0000000000000000 R11: 0000000000000000 R12: ffff880175055d88 [ 6902.127129] R13: ffff880175050bb0 R14: 0000000000000000 R15: dead000000000100 [ 6902.129060] FS: 00007f4507223780(0000) GS:ffff88017ba00000(0000) knlGS:0000000000000000 [ 6902.130996] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 6902.132558] CR2: 00005623599cac78 CR3: 000000014b700001 CR4: 00000000003606e0 [ 6902.134270] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 6902.135981] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 6902.137836] Call Trace: [ 6902.138939] close_ctree+0x171/0x330 [btrfs] [ 6902.140181] ? kthread_stop+0x146/0x1f0 [ 6902.141277] generic_shutdown_super+0x6c/0x100 [ 6902.142517] kill_anon_super+0x14/0x30 [ 6902.143554] btrfs_kill_super+0x13/0x100 [btrfs] [ 6902.144790] deactivate_locked_super+0x2f/0x70 [ 6902.146014] cleanup_mnt+0x3b/0x70 [ 6902.147020] task_work_run+0x9e/0xd0 [ 6902.148036] do_syscall_64+0x470/0x600 [ 6902.149142] ? trace_hardirqs_off_thunk+0x1a/0x1c [ 6902.150375] entry_SYSCALL_64_after_hwframe+0x49/0xbe [ 6902.151640] RIP: 0033:0x7f45077a6a7b [ 6902.157324] RSP: 002b:00007ffd589f3e68 EFLAGS: 00000246 ORIG_RAX: 00000000000000a6 [ 6902.159187] RAX: 0000000000000000 RBX: 000055e8eec732b0 RCX: 00007f45077a6a7b [ 6902.160834] RDX: 0000000000000001 RSI: 0000000000000000 RDI: 000055e8eec73490 [ 6902.162526] RBP: 0000000000000000 R08: 000055e8eec734b0 R09: 00007ffd589f26c0 [ 6902.164141] R10: 0000000000000000 R11: 0000000000000246 R12: 000055e8eec73490 [ 6902.165815] R13: 00007f4507ac61a4 R14: 0000000000000000 R15: 00007ffd589f40d8 [ 6902.167553] irq event stamp: 0 [ 6902.168998] hardirqs last enabled at (0): [<0000000000000000>] (null) [ 6902.170731] hardirqs last disabled at (0): [<ffffffff810cd810>] copy_process.part.55+0x3b0/0x1f00 [ 6902.172773] softirqs last enabled at (0): [<ffffffff810cd810>] copy_process.part.55+0x3b0/0x1f00 [ 6902.174671] softirqs last disabled at (0): [<0000000000000000>] (null) [ 6902.176407] ---[ end trace 463138c2986b275c ]--- [ 6902.177636] BTRFS info (device dm-3): space_info 4 has 273465344 free, is not full [ 6902.179453] BTRFS info (device dm-3): space_info total=276824064, used=4685824, pinned=18446744073708158976, reserved=0, may_use=0, readonly=65536 In the above line there's "pinned=18446744073708158976" which is an unsigned u64 value of -1392640, an obvious underflow. When transaction_kthread is running cleanup_transaction(), another fsstress is running btrfs_commit_transaction(). The btrfs_finish_extent_commit() may get the same range as btrfs_destroy_pinned_extent() got, which causes the pinned underflow. Fixes: d4b450cd ("Btrfs: fix race between transaction commit and empty block group removal") CC: stable@vger.kernel.org # 4.4+ Reviewed-by:
Lu Fengqi <lufq.fnst@cn.fujitsu.com> Reviewed-by:
-
Robbie Ko authored
When the cow_file_range fails, the related resources are unlocked according to the range [start..end), so the unlock cannot be repeated in run_delalloc_nocow. In some cases (e.g. cur_offset <= end && cow_start != -1), cur_offset is not updated correctly, so move the cur_offset update before cow_file_range. kernel BUG at mm/page-writeback.c:2663! Internal error: Oops - BUG: 0 [#1] SMP CPU: 3 PID: 31525 Comm: kworker/u8:7 Tainted: P O Hardware name: Realtek_RTD1296 (DT) Workqueue: writeback wb_workfn (flush-btrfs-1) task: ffffffc076db3380 ti: ffffffc02e9ac000 task.ti: ffffffc02e9ac000 PC is at clear_page_dirty_for_io+0x1bc/0x1e8 LR is at clear_page_dirty_for_io+0x14/0x1e8 pc : [<ffffffc00033c91c>] lr : [<ffffffc00033c774>] pstate: 40000145 sp : ffffffc02e9af4f0 Process kworker/u8:7 (pid: 31525, stack limit = 0xffffffc02e9ac020) Call trace: [<ffffffc00033c91c>] clear_page_dirty_for_io+0x1bc/0x1e8 [<ffffffbffc514674>] extent_clear_unlock_delalloc+0x1e4/0x210 [btrfs] [<ffffffbffc4fb168>] run_delalloc_nocow+0x3b8/0x948 [btrfs] [<ffffffbffc4fb948>] run_delalloc_range+0x250/0x3a8 [btrfs] [<ffffffbffc514c0c>] writepage_delalloc.isra.21+0xbc/0x1d8 [btrfs] [<ffffffbffc516048>] __extent_writepage+0xe8/0x248 [btrfs] [<ffffffbffc51630c>] extent_write_cache_pages.isra.17+0x164/0x378 [btrfs] [<ffffffbffc5185a8>] extent_writepages+0x48/0x68 [btrfs] [<ffffffbffc4f5828>] btrfs_writepages+0x20/0x30 [btrfs] [<ffffffc00033d758>] do_writepages+0x30/0x88 [<ffffffc0003ba0f4>] __writeback_single_inode+0x34/0x198 [<ffffffc0003ba6c4>] writeback_sb_inodes+0x184/0x3c0 [<ffffffc0003ba96c>] __writeback_inodes_wb+0x6c/0xc0 [<ffffffc0003bac20>] wb_writeback+0x1b8/0x1c0 [<ffffffc0003bb0f0>] wb_workfn+0x150/0x250 [<ffffffc0002b0014>] process_one_work+0x1dc/0x388 [<ffffffc0002b02f0>] worker_thread+0x130/0x500 [<ffffffc0002b6344>] kthread+0x10c/0x110 [<ffffffc000284590>] ret_from_fork+0x10/0x40 Code: d503201f a9025bb5 a90363b7 f90023b9 (d4210000) CC: stable@vger.kernel.org # 4.4+ Reviewed-by:
-
- 22 Oct, 2018 1 commit
-
-
Filipe Manana authored
We were iterating a block group's free space cache rbtree without locking first the lock that protects it (the free_space_ctl->free_space_offset rbtree is protected by the free_space_ctl->tree_lock spinlock). KASAN reported an use-after-free problem when iterating such a rbtree due to a concurrent rbtree delete: [ 9520.359168] ================================================================== [ 9520.359656] BUG: KASAN: use-after-free in rb_next+0x13/0x90 [ 9520.359949] Read of size 8 at addr ffff8800b7ada500 by task btrfs-transacti/1721 [ 9520.360357] [ 9520.360530] CPU: 4 PID: 1721 Comm: btrfs-transacti Tainted: G L 4.19.0-rc8-nbor #555 [ 9520.360990] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014 [ 9520.362682] Call Trace: [ 9520.362887] dump_stack+0xa4/0xf5 [ 9520.363146] print_address_description+0x78/0x280 [ 9520.363412] kasan_report+0x263/0x390 [ 9520.363650] ? rb_next+0x13/0x90 [ 9520.363873] __asan_load8+0x54/0x90 [ 9520.364102] rb_next+0x13/0x90 [ 9520.364380] btrfs_dump_free_space+0x146/0x160 [btrfs] [ 9520.364697] dump_space_info+0x2cd/0x310 [btrfs] [ 9520.364997] btrfs_reserve_extent+0x1ee/0x1f0 [btrfs] [ 9520.365310] __btrfs_prealloc_file_range+0x1cc/0x620 [btrfs] [ 9520.365646] ? btrfs_update_time+0x180/0x180 [btrfs] [ 9520.365923] ? _raw_spin_unlock+0x27/0x40 [ 9520.366204] ? btrfs_alloc_data_chunk_ondemand+0x2c0/0x5c0 [btrfs] [ 9520.366549] btrfs_prealloc_file_range_trans+0x23/0x30 [btrfs] [ 9520.366880] cache_save_setup+0x42e/0x580 [btrfs] [ 9520.367220] ? btrfs_check_data_free_space+0xd0/0xd0 [btrfs] [ 9520.367518] ? lock_downgrade+0x2f0/0x2f0 [ 9520.367799] ? btrfs_write_dirty_block_groups+0x11f/0x6e0 [btrfs] [ 9520.368104] ? kasan_check_read+0x11/0x20 [ 9520.368349] ? do_raw_spin_unlock+0xa8/0x140 [ 9520.368638] btrfs_write_dirty_block_groups+0x2af/0x6e0 [btrfs] [ 9520.368978] ? btrfs_start_dirty_block_groups+0x870/0x870 [btrfs] [ 9520.369282] ? do_raw_spin_unlock+0xa8/0x140 [ 9520.369534] ? _raw_spin_unlock+0x27/0x40 [ 9520.369811] ? btrfs_run_delayed_refs+0x1b8/0x230 [btrfs] [ 9520.370137] commit_cowonly_roots+0x4b9/0x610 [btrfs] [ 9520.370560] ? commit_fs_roots+0x350/0x350 [btrfs] [ 9520.370926] ? btrfs_run_delayed_refs+0x1b8/0x230 [btrfs] [ 9520.371285] btrfs_commit_transaction+0x5e5/0x10e0 [btrfs] [ 9520.371612] ? btrfs_apply_pending_changes+0x90/0x90 [btrfs] [ 9520.371943] ? start_transaction+0x168/0x6c0 [btrfs] [ 9520.372257] transaction_kthread+0x21c/0x240 [btrfs] [ 9520.372537] kthread+0x1d2/0x1f0 [ 9520.372793] ? btrfs_cleanup_transaction+0xb50/0xb50 [btrfs] [ 9520.373090] ? kthread_park+0xb0/0xb0 [ 9520.373329] ret_from_fork+0x3a/0x50 [ 9520.373567] [ 9520.373738] Allocated by task 1804: [ 9520.373974] kasan_kmalloc+0xff/0x180 [ 9520.374208] kasan_slab_alloc+0x11/0x20 [ 9520.374447] kmem_cache_alloc+0xfc/0x2d0 [ 9520.374731] __btrfs_add_free_space+0x40/0x580 [btrfs] [ 9520.375044] unpin_extent_range+0x4f7/0x7a0 [btrfs] [ 9520.375383] btrfs_finish_extent_commit+0x15f/0x4d0 [btrfs] [ 9520.375707] btrfs_commit_transaction+0xb06/0x10e0 [btrfs] [ 9520.376027] btrfs_alloc_data_chunk_ondemand+0x237/0x5c0 [btrfs] [ 9520.376365] btrfs_check_data_free_space+0x81/0xd0 [btrfs] [ 9520.376689] btrfs_delalloc_reserve_space+0x25/0x80 [btrfs] [ 9520.377018] btrfs_direct_IO+0x42e/0x6d0 [btrfs] [ 9520.377284] generic_file_direct_write+0x11e/0x220 [ 9520.377587] btrfs_file_write_iter+0x472/0xac0 [btrfs] [ 9520.377875] aio_write+0x25c/0x360 [ 9520.378106] io_submit_one+0xaa0/0xdc0 [ 9520.378343] __se_sys_io_submit+0xfa/0x2f0 [ 9520.378589] __x64_sys_io_submit+0x43/0x50 [ 9520.378840] do_syscall_64+0x7d/0x240 [ 9520.379081] entry_SYSCALL_64_after_hwframe+0x49/0xbe [ 9520.379387] [ 9520.379557] Freed by task 1802: [ 9520.379782] __kasan_slab_free+0x173/0x260 [ 9520.380028] kasan_slab_free+0xe/0x10 [ 9520.380262] kmem_cache_free+0xc1/0x2c0 [ 9520.380544] btrfs_find_space_for_alloc+0x4cd/0x4e0 [btrfs] [ 9520.380866] find_free_extent+0xa99/0x17e0 [btrfs] [ 9520.381166] btrfs_reserve_extent+0xd5/0x1f0 [btrfs] [ 9520.381474] btrfs_get_blocks_direct+0x60b/0xbd0 [btrfs] [ 9520.381761] __blockdev_direct_IO+0x10ee/0x58a1 [ 9520.382059] btrfs_direct_IO+0x25a/0x6d0 [btrfs] [ 9520.382321] generic_file_direct_write+0x11e/0x220 [ 9520.382623] btrfs_file_write_iter+0x472/0xac0 [btrfs] [ 9520.382904] aio_write+0x25c/0x360 [ 9520.383172] io_submit_one+0xaa0/0xdc0 [ 9520.383416] __se_sys_io_submit+0xfa/0x2f0 [ 9520.383678] __x64_sys_io_submit+0x43/0x50 [ 9520.383927] do_syscall_64+0x7d/0x240 [ 9520.384165] entry_SYSCALL_64_after_hwframe+0x49/0xbe [ 9520.384439] [ 9520.384610] The buggy address belongs to the object at ffff8800b7ada500 which belongs to the cache btrfs_free_space of size 72 [ 9520.385175] The buggy address is located 0 bytes inside of 72-byte region [ffff8800b7ada500, ffff8800b7ada548) [ 9520.385691] The buggy address belongs to the page: [ 9520.385957] page:ffffea0002deb680 count:1 mapcount:0 mapping:ffff880108a1d700 index:0x0 compound_mapcount: 0 [ 9520.388030] flags: 0x8100(slab|head) [ 9520.388281] raw: 0000000000008100 ffffea0002deb608 ffffea0002728808 ffff880108a1d700 [ 9520.388722] raw: 0000000000000000 0000000000130013 00000001ffffffff 0000000000000000 [ 9520.389169] page dumped because: kasan: bad access detected [ 9520.389473] [ 9520.389658] Memory state around the buggy address: [ 9520.389943] ffff8800b7ada400: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 9520.390368] ffff8800b7ada480: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 9520.390796] >ffff8800b7ada500: fb fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc [ 9520.391223] ^ [ 9520.391461] ffff8800b7ada580: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 9520.391885] ffff8800b7ada600: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 9520.392313] ================================================================== [ 9520.392772] BTRFS critical (device vdc): entry offset 2258497536, bytes 131072, bitmap no [ 9520.393247] BUG: unable to handle kernel NULL pointer dereference at 0000000000000011 [ 9520.393705] PGD 800000010dbab067 P4D 800000010dbab067 PUD 107551067 PMD 0 [ 9520.394059] Oops: 0000 [#1] SMP DEBUG_PAGEALLOC KASAN PTI [ 9520.394378] CPU: 4 PID: 1721 Comm: btrfs-transacti Tainted: G B L 4.19.0-rc8-nbor #555 [ 9520.394858] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014 [ 9520.395350] RIP: 0010:rb_next+0x3c/0x90 [ 9520.396461] RSP: 0018:ffff8801074ff780 EFLAGS: 00010292 [ 9520.396762] RAX: 0000000000000000 RBX: 0000000000000001 RCX: ffffffff81b5ac4c [ 9520.397115] RDX: 0000000000000000 RSI: 0000000000000008 RDI: 0000000000000011 [ 9520.397468] RBP: ffff8801074ff7a0 R08: ffffed0021d64ccc R09: ffffed0021d64ccc [ 9520.397821] R10: 0000000000000001 R11: ffffed0021d64ccb R12: ffff8800b91e0000 [ 9520.398188] R13: ffff8800a3ceba48 R14: ffff8800b627bf80 R15: 0000000000020000 [ 9520.398555] FS: 0000000000000000(0000) GS:ffff88010eb00000(0000) knlGS:0000000000000000 [ 9520.399007] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 9520.399335] CR2: 0000000000000011 CR3: 0000000106b52000 CR4: 00000000000006a0 [ 9520.399679] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 9520.400023] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 9520.400400] Call Trace: [ 9520.400648] btrfs_dump_free_space+0x146/0x160 [btrfs] [ 9520.400974] dump_space_info+0x2cd/0x310 [btrfs] [ 9520.401287] btrfs_reserve_extent+0x1ee/0x1f0 [btrfs] [ 9520.401609] __btrfs_prealloc_file_range+0x1cc/0x620 [btrfs] [ 9520.401952] ? btrfs_update_time+0x180/0x180 [btrfs] [ 9520.402232] ? _raw_spin_unlock+0x27/0x40 [ 9520.402522] ? btrfs_alloc_data_chunk_ondemand+0x2c0/0x5c0 [btrfs] [ 9520.402882] btrfs_prealloc_file_range_trans+0x23/0x30 [btrfs] [ 9520.403261] cache_save_setup+0x42e/0x580 [btrfs] [ 9520.403570] ? btrfs_check_data_free_space+0xd0/0xd0 [btrfs] [ 9520.403871] ? lock_downgrade+0x2f0/0x2f0 [ 9520.404161] ? btrfs_write_dirty_block_groups+0x11f/0x6e0 [btrfs] [ 9520.404481] ? kasan_check_read+0x11/0x20 [ 9520.404732] ? do_raw_spin_unlock+0xa8/0x140 [ 9520.405026] btrfs_write_dirty_block_groups+0x2af/0x6e0 [btrfs] [ 9520.405375] ? btrfs_start_dirty_block_groups+0x870/0x870 [btrfs] [ 9520.405694] ? do_raw_spin_unlock+0xa8/0x140 [ 9520.405958] ? _raw_spin_unlock+0x27/0x40 [ 9520.406243] ? btrfs_run_delayed_refs+0x1b8/0x230 [btrfs] [ 9520.406574] commit_cowonly_roots+0x4b9/0x610 [btrfs] [ 9520.406899] ? commit_fs_roots+0x350/0x350 [btrfs] [ 9520.407253] ? btrfs_run_delayed_refs+0x1b8/0x230 [btrfs] [ 9520.407589] btrfs_commit_transaction+0x5e5/0x10e0 [btrfs] [ 9520.407925] ? btrfs_apply_pending_changes+0x90/0x90 [btrfs] [ 9520.408262] ? start_transaction+0x168/0x6c0 [btrfs] [ 9520.408582] transaction_kthread+0x21c/0x240 [btrfs] [ 9520.408870] kthread+0x1d2/0x1f0 [ 9520.409138] ? btrfs_cleanup_transaction+0xb50/0xb50 [btrfs] [ 9520.409440] ? kthread_park+0xb0/0xb0 [ 9520.409682] ret_from_fork+0x3a/0x50 [ 9520.410508] Dumping ftrace buffer: [ 9520.410764] (ftrace buffer empty) [ 9520.411007] CR2: 0000000000000011 [ 9520.411297] ---[ end trace 01a0863445cf360a ]--- [ 9520.411568] RIP: 0010:rb_next+0x3c/0x90 [ 9520.412644] RSP: 0018:ffff8801074ff780 EFLAGS: 00010292 [ 9520.412932] RAX: 0000000000000000 RBX: 0000000000000001 RCX: ffffffff81b5ac4c [ 9520.413274] RDX: 0000000000000000 RSI: 0000000000000008 RDI: 0000000000000011 [ 9520.413616] RBP: ffff8801074ff7a0 R08: ffffed0021d64ccc R09: ffffed0021d64ccc [ 9520.414007] R10: 0000000000000001 R11: ffffed0021d64ccb R12: ffff8800b91e0000 [ 9520.414349] R13: ffff8800a3ceba48 R14: ffff8800b627bf80 R15: 0000000000020000 [ 9520.416074] FS: 0000000000000000(0000) GS:ffff88010eb00000(0000) knlGS:0000000000000000 [ 9520.416536] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 9520.416848] CR2: 0000000000000011 CR3: 0000000106b52000 CR4: 00000000000006a0 [ 9520.418477] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 9520.418846] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 9520.419204] Kernel panic - not syncing: Fatal exception [ 9520.419666] Dumping ftrace buffer: [ 9520.419930] (ftrace buffer empty) [ 9520.420168] Kernel Offset: disabled [ 9520.420406] ---[ end Kernel panic - not syncing: Fatal exception ]--- Fix this by acquiring the respective lock before iterating the rbtree. Reported-by:
-
- 19 Oct, 2018 9 commits
-
-
Filipe Manana authored
At inode.c:evict_inode_truncate_pages(), when we iterate over the inode's extent states, we access an extent state record's "state" field after we unlocked the inode's io tree lock. This can lead to a use-after-free issue because after we unlock the io tree that extent state record might have been freed due to being merged into another adjacent extent state record (a previous inflight bio for a read operation finished in the meanwhile which unlocked a range in the io tree and cause a merge of extent state records, as explained in the comment before the while loop added in commit 6ca07097 ("Btrfs: fix hang during inode eviction due to concurrent readahead")). Fix this by keeping a copy of the extent state's flags in a local variable and using it after unlocking the io tree. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=201189 Fixes: b9d0b389 ("btrfs: Add handler for invalidate page") CC: stable@vger.kernel.org # 4.4+ Reviewed-by:
-
Josef Bacik authored
We're getting a lockdep splat because we take the dio_sem under the log_mutex. What we really need is to protect fsync() from logging an extent map for an extent we never waited on higher up, so just guard the whole thing with dio_sem. ====================================================== WARNING: possible circular locking dependency detected 4.18.0-rc4-xfstests-00025-g5de5edbaf1d4 #411 Not tainted ------------------------------------------------------ aio-dio-invalid/30928 is trying to acquire lock: 0000000092621cfd (&mm->mmap_sem){++++}, at: get_user_pages_unlocked+0x5a/0x1e0 but task is already holding lock: 00000000cefe6b35 (&ei->dio_sem){++++}, at: btrfs_direct_IO+0x3be/0x400 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #5 (&ei->dio_sem){++++}: lock_acquire+0xbd/0x220 down_write+0x51/0xb0 btrfs_log_changed_extents+0x80/0xa40 btrfs_log_inode+0xbaf/0x1000 btrfs_log_inode_parent+0x26f/0xa80 btrfs_log_dentry_safe+0x50/0x70 btrfs_sync_file+0x357/0x540 do_fsync+0x38/0x60 __ia32_sys_fdatasync+0x12/0x20 do_fast_syscall_32+0x9a/0x2f0 entry_SYSENTER_compat+0x84/0x96 -> #4 (&ei->log_mutex){+.+.}: lock_acquire+0xbd/0x220 __mutex_lock+0x86/0xa10 btrfs_record_unlink_dir+0x2a/0xa0 btrfs_unlink+0x5a/0xc0 vfs_unlink+0xb1/0x1a0 do_unlinkat+0x264/0x2b0 do_fast_syscall_32+0x9a/0x2f0 entry_SYSENTER_compat+0x84/0x96 -> #3 (sb_internal#2){.+.+}: lock_acquire+0xbd/0x220 __sb_start_write+0x14d/0x230 start_transaction+0x3e6/0x590 btrfs_evict_inode+0x475/0x640 evict+0xbf/0x1b0 btrfs_run_delayed_iputs+0x6c/0x90 cleaner_kthread+0x124/0x1a0 kthread+0x106/0x140 ret_from_fork+0x3a/0x50 -> #2 (&fs_info->cleaner_delayed_iput_mutex){+.+.}: lock_acquire+0xbd/0x220 __mutex_lock+0x86/0xa10 btrfs_alloc_data_chunk_ondemand+0x197/0x530 btrfs_check_data_free_space+0x4c/0x90 btrfs_delalloc_reserve_space+0x20/0x60 btrfs_page_mkwrite+0x87/0x520 do_page_mkwrite+0x31/0xa0 __handle_mm_fault+0x799/0xb00 handle_mm_fault+0x7c/0xe0 __do_page_fault+0x1d3/0x4a0 async_page_fault+0x1e/0x30 -> #1 (sb_pagefaults){.+.+}: lock_acquire+0xbd/0x220 __sb_start_write+0x14d/0x230 btrfs_page_mkwrite+0x6a/0x520 do_page_mkwrite+0x31/0xa0 __handle_mm_fault+0x799/0xb00 handle_mm_fault+0x7c/0xe0 __do_page_fault+0x1d3/0x4a0 async_page_fault+0x1e/0x30 -> #0 (&mm->mmap_sem){++++}: __lock_acquire+0x42e/0x7a0 lock_acquire+0xbd/0x220 down_read+0x48/0xb0 get_user_pages_unlocked+0x5a/0x1e0 get_user_pages_fast+0xa4/0x150 iov_iter_get_pages+0xc3/0x340 do_direct_IO+0xf93/0x1d70 __blockdev_direct_IO+0x32d/0x1c20 btrfs_direct_IO+0x227/0x400 generic_file_direct_write+0xcf/0x180 btrfs_file_write_iter+0x308/0x58c aio_write+0xf8/0x1d0 io_submit_one+0x3a9/0x620 __ia32_compat_sys_io_submit+0xb2/0x270 do_int80_syscall_32+0x5b/0x1a0 entry_INT80_compat+0x88/0xa0 other info that might help us debug this: Chain exists of: &mm->mmap_sem --> &ei->log_mutex --> &ei->dio_sem Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&ei->dio_sem); lock(&ei->log_mutex); lock(&ei->dio_sem); lock(&mm->mmap_sem); *** DEADLOCK *** 1 lock held by aio-dio-invalid/30928: #0: 00000000cefe6b35 (&ei->dio_sem){++++}, at: btrfs_direct_IO+0x3be/0x400 stack backtrace: CPU: 0 PID: 30928 Comm: aio-dio-invalid Not tainted 4.18.0-rc4-xfstests-00025-g5de5edbaf1d4 #411 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.11.0-2.el7 04/01/2014 Call Trace: dump_stack+0x7c/0xbb print_circular_bug.isra.37+0x297/0x2a4 check_prev_add.constprop.45+0x781/0x7a0 ? __lock_acquire+0x42e/0x7a0 validate_chain.isra.41+0x7f0/0xb00 __lock_acquire+0x42e/0x7a0 lock_acquire+0xbd/0x220 ? get_user_pages_unlocked+0x5a/0x1e0 down_read+0x48/0xb0 ? get_user_pages_unlocked+0x5a/0x1e0 get_user_pages_unlocked+0x5a/0x1e0 get_user_pages_fast+0xa4/0x150 iov_iter_get_pages+0xc3/0x340 do_direct_IO+0xf93/0x1d70 ? __alloc_workqueue_key+0x358/0x490 ? __blockdev_direct_IO+0x14b/0x1c20 __blockdev_direct_IO+0x32d/0x1c20 ? btrfs_run_delalloc_work+0x40/0x40 ? can_nocow_extent+0x490/0x490 ? kvm_clock_read+0x1f/0x30 ? can_nocow_extent+0x490/0x490 ? btrfs_run_delalloc_work+0x40/0x40 btrfs_direct_IO+0x227/0x400 ? btrfs_run_delalloc_work+0x40/0x40 generic_file_direct_write+0xcf/0x180 btrfs_file_write_iter+0x308/0x58c aio_write+0xf8/0x1d0 ? kvm_clock_read+0x1f/0x30 ? __might_fault+0x3e/0x90 io_submit_one+0x3a9/0x620 ? io_submit_one+0xe5/0x620 __ia32_compat_sys_io_submit+0xb2/0x270 do_int80_syscall_32+0x5b/0x1a0 entry_INT80_compat+0x88/0xa0 CC: stable@vger.kernel.org # 4.14+ Reviewed-by: -
Josef Bacik authored
This could result in a really bad case where we do something like evict evict_refill_and_join btrfs_commit_transaction btrfs_run_delayed_iputs evict evict_refill_and_join btrfs_commit_transaction ... forever We have plenty of other places where we run delayed iputs that are much safer, let those do the work. CC: stable@vger.kernel.org # 4.4+ Reviewed-by: -
Josef Bacik authored
We were not handling the reserved byte accounting properly for data references. Metadata was fine, if it errored out the error paths would free the bytes_reserved count and pin the extent, but it even missed one of the error cases. So instead move this handling up into run_one_delayed_ref so we are sure that both cases are properly cleaned up in case of a transaction abort. CC: stable@vger.kernel.org # 4.18+ Reviewed-by:
-
Josef Bacik authored
When we insert the file extent once the ordered extent completes we free the reserved extent reservation as it'll have been migrated to the bytes_used counter. However if we error out after this step we'll still clear the reserved extent reservation, resulting in a negative accounting of the reserved bytes for the block group and space info. Fix this by only doing the free if we didn't successfully insert a file extent for this extent. CC: stable@vger.kernel.org # 4.14+ Reviewed-by:
-
Josef Bacik authored
max_extent_size is supposed to be the largest contiguous range for the space info, and ctl->free_space is the total free space in the block group. We need to keep track of these separately and _only_ use the max_free_space if we don't have a max_extent_size, as that means our original request was too large to search any of the block groups for and therefore wouldn't have a max_extent_size set. CC: stable@vger.kernel.org # 4.14+ Reviewed-by:
Josef Bacik <jbacik@fb.com> Signed-off-by:
-
Josef Bacik authored
We can't use entry->bytes if our entry is a bitmap entry, we need to use entry->max_extent_size in that case. Fix up all the logic to make this consistent. CC: stable@vger.kernel.org # 4.4+ Signed-off-by:
-
Josef Bacik authored
If we use up our block group before allocating a new one we'll easily get a max_extent_size that's set really really low, which will result in a lot of fragmentation. We need to make sure we're resetting the max_extent_size when we add a new chunk or add new space. CC: stable@vger.kernel.org # 4.4+ Reviewed-by:
-
Josef Bacik authored
My work email is completely useless, switch it to my personal address so I get emails on a account I actually pay attention to. Signed-off-by:
-
- 17 Oct, 2018 4 commits
-
-
Lu Fengqi authored
The find_ref_head shouldn't return the first entry even if no exact match is found. So move the hidden behavior to higher level. Besides, remove the useless local variables in the btrfs_select_ref_head. Reviewed-by:
-
Filipe Manana authored
When writing out a block group free space cache we can end deadlocking with ourselves on an extent buffer lock resulting in a warning like the following: [245043.379979] WARNING: CPU: 4 PID: 2608 at fs/btrfs/locking.c:251 btrfs_tree_lock+0x1be/0x1d0 [btrfs] [245043.392792] CPU: 4 PID: 2608 Comm: btrfs-transacti Tainted: G W I 4.16.8 #1 [245043.395489] RIP: 0010:btrfs_tree_lock+0x1be/0x1d0 [btrfs] [245043.396791] RSP: 0018:ffffc9000424b840 EFLAGS: 00010246 [245043.398093] RAX: 0000000000000a30 RBX: ffff8807e20a3d20 RCX: 0000000000000001 [245043.399414] RDX: 0000000000000001 RSI: 0000000000000002 RDI: ffff8807e20a3d20 [245043.400732] RBP: 0000000000000001 R08: ffff88041f39a700 R09: ffff880000000000 [245043.402021] R10: 0000000000000040 R11: ffff8807e20a3d20 R12: ffff8807cb220630 [245043.403296] R13: 0000000000000001 R14: ffff8807cb220628 R15: ffff88041fbdf000 [245043.404780] FS: 0000000000000000(0000) GS:ffff88082fc80000(0000) knlGS:0000000000000000 [245043.406050] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [245043.407321] CR2: 00007fffdbdb9f10 CR3: 0000000001c09005 CR4: 00000000000206e0 [245043.408670] Call Trace: [245043.409977] btrfs_search_slot+0x761/0xa60 [btrfs] [245043.411278] btrfs_insert_empty_items+0x62/0xb0 [btrfs] [245043.412572] btrfs_insert_item+0x5b/0xc0 [btrfs] [245043.413922] btrfs_create_pending_block_groups+0xfb/0x1e0 [btrfs] [245043.415216] do_chunk_alloc+0x1e5/0x2a0 [btrfs] [245043.416487] find_free_extent+0xcd0/0xf60 [btrfs] [245043.417813] btrfs_reserve_extent+0x96/0x1e0 [btrfs] [245043.419105] btrfs_alloc_tree_block+0xfb/0x4a0 [btrfs] [245043.420378] __btrfs_cow_block+0x127/0x550 [btrfs] [245043.421652] btrfs_cow_block+0xee/0x190 [btrfs] [245043.422979] btrfs_search_slot+0x227/0xa60 [btrfs] [245043.424279] ? btrfs_update_inode_item+0x59/0x100 [btrfs] [245043.425538] ? iput+0x72/0x1e0 [245043.426798] write_one_cache_group.isra.49+0x20/0x90 [btrfs] [245043.428131] btrfs_start_dirty_block_groups+0x102/0x420 [btrfs] [245043.429419] btrfs_commit_transaction+0x11b/0x880 [btrfs] [245043.430712] ? start_transaction+0x8e/0x410 [btrfs] [245043.432006] transaction_kthread+0x184/0x1a0 [btrfs] [245043.433341] kthread+0xf0/0x130 [245043.434628] ? btrfs_cleanup_transaction+0x4e0/0x4e0 [btrfs] [245043.435928] ? kthread_create_worker_on_cpu+0x40/0x40 [245043.437236] ret_from_fork+0x1f/0x30 [245043.441054] ---[ end trace 15abaa2aaf36827f ]--- This is because at write_one_cache_group() when we are COWing a leaf from the extent tree we end up allocating a new block group (chunk) and, because we have hit a threshold on the number of bytes reserved for system chunks, we attempt to finalize the creation of new block groups from the current transaction, by calling btrfs_create_pending_block_groups(). However here we also need to modify the extent tree in order to insert a block group item, and if the location for this new block group item happens to be in the same leaf that we were COWing earlier, we deadlock since btrfs_search_slot() tries to write lock the extent buffer that we locked before at write_one_cache_group(). We have already hit similar cases in the past and commit d9a0540a ("Btrfs: fix deadlock when finalizing block group creation") fixed some of those cases by delaying the creation of pending block groups at the known specific spots that could lead to a deadlock. This change reworks that commit to be more generic so that we don't have to add similar logic to every possible path that can lead to a deadlock. This is done by making __btrfs_cow_block() disallowing the creation of new block groups (setting the transaction's can_flush_pending_bgs to false) before it attempts to allocate a new extent buffer for either the extent, chunk or device trees, since those are the trees that pending block creation modifies. Once the new extent buffer is allocated, it allows creation of pending block groups to happen again. This change depends on a recent patch from Josef which is not yet in Linus' tree, named "btrfs: make sure we create all new block groups" in order to avoid occasional warnings at btrfs_trans_release_chunk_metadata(). Fixes: d9a0540a ("Btrfs: fix deadlock when finalizing block group creation") CC: stable@vger.kernel.org # 4.4+ Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=199753 Link: https://lore.kernel.org/linux-btrfs/CAJtFHUTHna09ST-_EEiyWmDH6gAqS6wa=zMNMBsifj8ABu99cw@mail.gmail.com/Reported-by:E V <eliventer@gmail.com> Reviewed-by:
-
Filipe Manana authored
When using the NO_HOLES feature and logging a regular file, we were expecting that if we find an inline extent, that either its size in RAM (uncompressed and unenconded) matches the size of the file or if it does not, that it matches the sector size and it represents compressed data. This assertion does not cover a case where the length of the inline extent is smaller than the sector size and also smaller the file's size, such case is possible through fallocate. Example: $ mkfs.btrfs -f -O no-holes /dev/sdb $ mount /dev/sdb /mnt $ xfs_io -f -c "pwrite -S 0xb60 0 21" /mnt/foobar $ xfs_io -c "falloc 40 40" /mnt/foobar $ xfs_io -c "fsync" /mnt/foobar In the above example we trigger the assertion because the inline extent's length is 21 bytes while the file size is 80 bytes. The fallocate() call merely updated the file's size and did not touch the existing inline extent, as expected. So fix this by adjusting the assertion so that an inline extent length smaller than the file size is valid if the file size is smaller than the filesystem's sector size. A test case for fstests follows soon. Reported-by:
Anatoly Trosinenko <anatoly.trosinenko@gmail.com> Fixes: a89ca6f2 ("Btrfs: fix fsync after truncate when no_holes feature is enabled") CC: stable@vger.kernel.org # 4.14+ Link: https://lore.kernel.org/linux-btrfs/CAE5jQCfRSBC7n4pUTFJcmHh109=gwyT9mFkCOL+NKfzswmR=_Q@mail.gmail.com/Signed-off-by:
-
Filipe Manana authored
At inode.c:compress_file_range(), under the "free_pages_out" label, we can end up dereferencing the "pages" pointer when it has a NULL value. This case happens when "start" has a value of 0 and we fail to allocate memory for the "pages" pointer. When that happens we jump to the "cont" label and then enter the "if (start == 0)" branch where we immediately call the cow_file_range_inline() function. If that function returns 0 (success creating an inline extent) or an error (like -ENOMEM for example) we jump to the "free_pages_out" label and then access "pages[i]" leading to a NULL pointer dereference, since "nr_pages" has a value greater than zero at that point. Fix this by setting "nr_pages" to 0 when we fail to allocate memory for the "pages" pointer. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=201119 Fixes: 771ed689 ("Btrfs: Optimize compressed writeback and reads") CC: stable@vger.kernel.org # 4.4+ Reviewed-by:
Liu Bo <bo.liu@linux.alibaba.com> Signed-off-by:
-
- 15 Oct, 2018 13 commits
-
-
Lu Fengqi authored
Using bool is more suitable than int here, and add the comment about the return_bigger. Signed-off-by:
-
Lu Fengqi authored
The avg_delayed_ref_runtime can be referenced from the transaction handle. Signed-off-by:
-
Lu Fengqi authored
It can be referenced from the transaction handle. Signed-off-by:
-
Lu Fengqi authored
Since trans is only used for referring to delayed_refs, there is no need to pass it instead of delayed_refs to btrfs_delayed_ref_lock(). No functional change. Reviewed-by:
-
Lu Fengqi authored
Since trans is only used for referring to delayed_refs, there is no need to pass it instead of delayed_refs to btrfs_select_ref_head(). No functional change. Signed-off-by:
-
Lu Fengqi authored
There is no reason to put this check in (!qgroup)'s else branch because if qgroup is null, it will goto out directly. So move it out to reduce indentation level. No functional change. Signed-off-by:
-
Qu Wenruo authored
Commit 581c1760 ("btrfs: Validate child tree block's level and first key") has made tree block level check mandatory. So if tree block level doesn't match, we won't get a valid extent buffer. The extra WARN_ON() check can be removed completely. Reviewed-by:
-
Qu Wenruo authored
And add one line comment explaining what we're doing for each loop. Reviewed-by:
-
Qu Wenruo authored
Some qgroup trace events like btrfs_qgroup_release_data() and btrfs_qgroup_free_delayed_ref() can still be triggered even if qgroup is not enabled. This is caused by the lack of qgroup status check before calling some qgroup functions. Thankfully the functions can handle quota disabled case well and just do nothing for qgroup disabled case. This patch will do earlier check before triggering related trace events. And for enabled <-> disabled race case: 1) For enabled->disabled case Disable will wipe out all qgroups data including reservation and excl/rfer. Even if we leak some reservation or numbers, it will still be cleared, so nothing will go wrong. 2) For disabled -> enabled case Current btrfs_qgroup_release_data() will use extent_io tree to ensure we won't underflow reservation. And for delayed_ref we use head->qgroup_reserved to record the reserved space, so in that case head->qgroup_reserved should be 0 and we won't underflow. CC: stable@vger.kernel.org # 4.14+ Reported-by:
Chris Murphy <lists@colorremedies.com> Link: https://lore.kernel.org/linux-btrfs/CAJCQCtQau7DtuUUeycCkZ36qjbKuxNzsgqJ7+sJ6W0dK_NLE3w@mail.gmail.com/Signed-off-by:
-
Filipe Manana authored
In a scenario like the following: mkdir /mnt/A # inode 258 mkdir /mnt/B # inode 259 touch /mnt/B/bar # inode 260 sync mv /mnt/B/bar /mnt/A/bar mv -T /mnt/A /mnt/B fsync /mnt/B/bar <power fail> After replaying the log we end up with file bar having 2 hard links, both with the name 'bar' and one in the directory with inode number 258 and the other in the directory with inode number 259. Also, we end up with the directory inode 259 still existing and with the directory inode 258 still named as 'A', instead of 'B'. In this scenario, file 'bar' should only have one hard link, located at directory inode 258, the directory inode 259 should not exist anymore and the name for directory inode 258 should be 'B'. This incorrect behaviour happens because when attempting to log the old parents of an inode, we skip any parents that no longer exist. Fix this by forcing a full commit if an old parent no longer exists. A test case for fstests follows soon. CC: stable@vger.kernel.org # 4.4+ Signed-off-by:
-
Filipe Manana authored
When replaying a log which contains a tmpfile (which necessarily has a link count of 0) we end up calling inc_nlink(), at fs/btrfs/tree-log.c:replay_one_buffer(), which produces a warning like the following: [195191.943673] WARNING: CPU: 0 PID: 6924 at fs/inode.c:342 inc_nlink+0x33/0x40 [195191.943723] CPU: 0 PID: 6924 Comm: mount Not tainted 4.19.0-rc6-btrfs-next-38 #1 [195191.943724] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.11.2-0-gf9626ccb91-prebuilt.qemu-project.org 04/01/2014 [195191.943726] RIP: 0010:inc_nlink+0x33/0x40 [195191.943728] RSP: 0018:ffffb96e425e3870 EFLAGS: 00010246 [195191.943730] RAX: 0000000000000000 RBX: ffff8c0d1e6af4f0 RCX: 0000000000000006 [195191.943731] RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff8c0d1e6af4f0 [195191.943731] RBP: 0000000000000097 R08: 0000000000000001 R09: 0000000000000000 [195191.943732] R10: 0000000000000000 R11: 0000000000000000 R12: ffffb96e425e3a60 [195191.943733] R13: ffff8c0d10cff0c8 R14: ffff8c0d0d515348 R15: ffff8c0d78a1b3f8 [195191.943735] FS: 00007f570ee24480(0000) GS:ffff8c0dfb200000(0000) knlGS:0000000000000000 [195191.943736] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [195191.943737] CR2: 00005593286277c8 CR3: 00000000bb8f2006 CR4: 00000000003606f0 [195191.943739] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [195191.943740] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [195191.943741] Call Trace: [195191.943778] replay_one_buffer+0x797/0x7d0 [btrfs] [195191.943802] walk_up_log_tree+0x1c1/0x250 [btrfs] [195191.943809] ? rcu_read_lock_sched_held+0x3f/0x70 [195191.943825] walk_log_tree+0xae/0x1d0 [btrfs] [195191.943840] btrfs_recover_log_trees+0x1d7/0x4d0 [btrfs] [195191.943856] ? replay_dir_deletes+0x280/0x280 [btrfs] [195191.943870] open_ctree+0x1c3b/0x22a0 [btrfs] [195191.943887] btrfs_mount_root+0x6b4/0x800 [btrfs] [195191.943894] ? rcu_read_lock_sched_held+0x3f/0x70 [195191.943899] ? pcpu_alloc+0x55b/0x7c0 [195191.943906] ? mount_fs+0x3b/0x140 [195191.943908] mount_fs+0x3b/0x140 [195191.943912] ? __init_waitqueue_head+0x36/0x50 [195191.943916] vfs_kern_mount+0x62/0x160 [195191.943927] btrfs_mount+0x134/0x890 [btrfs] [195191.943936] ? rcu_read_lock_sched_held+0x3f/0x70 [195191.943938] ? pcpu_alloc+0x55b/0x7c0 [195191.943943] ? mount_fs+0x3b/0x140 [195191.943952] ? btrfs_remount+0x570/0x570 [btrfs] [195191.943954] mount_fs+0x3b/0x140 [195191.943956] ? __init_waitqueue_head+0x36/0x50 [195191.943960] vfs_kern_mount+0x62/0x160 [195191.943963] do_mount+0x1f9/0xd40 [195191.943967] ? memdup_user+0x4b/0x70 [195191.943971] ksys_mount+0x7e/0xd0 [195191.943974] __x64_sys_mount+0x21/0x30 [195191.943977] do_syscall_64+0x60/0x1b0 [195191.943980] entry_SYSCALL_64_after_hwframe+0x49/0xbe [195191.943983] RIP: 0033:0x7f570e4e524a [195191.943986] RSP: 002b:00007ffd83589478 EFLAGS: 00000206 ORIG_RAX: 00000000000000a5 [195191.943989] RAX: ffffffffffffffda RBX: 0000563f335b2060 RCX: 00007f570e4e524a [195191.943990] RDX: 0000563f335b2240 RSI: 0000563f335b2280 RDI: 0000563f335b2260 [195191.943992] RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000020 [195191.943993] R10: 00000000c0ed0000 R11: 0000000000000206 R12: 0000563f335b2260 [195191.943994] R13: 0000563f335b2240 R14: 0000000000000000 R15: 00000000ffffffff [195191.944002] irq event stamp: 8688 [195191.944010] hardirqs last enabled at (8687): [<ffffffff9cb004c3>] console_unlock+0x503/0x640 [195191.944012] hardirqs last disabled at (8688): [<ffffffff9ca037dd>] trace_hardirqs_off_thunk+0x1a/0x1c [195191.944018] softirqs last enabled at (8638): [<ffffffff9cc0a5d1>] __set_page_dirty_nobuffers+0x101/0x150 [195191.944020] softirqs last disabled at (8634): [<ffffffff9cc26bbe>] wb_wakeup_delayed+0x2e/0x60 [195191.944022] ---[ end trace 5d6e873a9a0b811a ]--- This happens because the inode does not have the flag I_LINKABLE set, which is a runtime only flag, not meant to be persisted, set when the inode is created through open(2) if the flag O_EXCL is not passed to it. Except for the warning, there are no other consequences (like corruptions or metadata inconsistencies). Since it's pointless to replay a tmpfile as it would be deleted in a later phase of the log replay procedure (it has a link count of 0), fix this by not logging tmpfiles and if a tmpfile is found in a log (created by a kernel without this change), skip the replay of the inode. A test case for fstests follows soon. Fixes: 471d557a ("Btrfs: fix loss of prealloc extents past i_size after fsync log replay") CC: stable@vger.kernel.org # 4.18+ Reported-by:
Martin Steigerwald <martin@lichtvoll.de> Link: https://lore.kernel.org/linux-btrfs/3666619.NTnn27ZJZE@merkaba/Signed-off-by:
-
Josef Bacik authored
We don't need it, rsv->size is set once and never changes throughout its lifetime, so just use that for the reserve size. Signed-off-by:
-
Josef Bacik authored
I ran into an issue where there was some reference being held on an inode that I couldn't track. This assert wasn't triggered, but it at least rules out we're doing something stupid. Reviewed-by:
-
