- 11 Jan, 2024 5 commits
-
-
Samuel Holland authored
The current description implies that only a single address translation mode is available to the operating system. However, some implementations support multiple address translation modes, and the operating system is free to choose between them. Per the RISC-V privileged specification, Sv48 implementations must also implement Sv39, and likewise Sv57 implies support for Sv48. This means it is possible to describe all supported address translation modes using a single value, by naming the largest supported mode. This appears to have been the intended usage of the property, so note it explicitly. Fixes: 4fd669a8 ("dt-bindings: riscv: convert cpu binding to json-schema") Signed-off-by:
Samuel Holland <samuel.holland@sifive.com> Reviewed-by:
Conor Dooley <conor.dooley@microchip.com> Link: https://lore.kernel.org/r/20231227175739.1453782-1-samuel.holland@sifive.comSigned-off-by:
Palmer Dabbelt <palmer@rivosinc.com>
-
Palmer Dabbelt authored
Anup Patel <apatel@ventanamicro.com> says: The SBI v2.0 specification is now frozen. The SBI v2.0 specification defines SBI debug console (DBCN) extension which replaces the legacy SBI v0.1 functions sbi_console_putchar() and sbi_console_getchar(). (Refer v2.0-rc5 at https://github.com/riscv-non-isa/riscv-sbi-doc/releases) This series adds support for SBI debug console (DBCN) extension in Linux RISC-V. To try these patches with KVM RISC-V, use KVMTOOL from the riscv_zbx_zicntr_smstateen_condops_v1 branch at: https://github.com/avpatel/kvmtool.git * b4-shazam-merge: RISC-V: Enable SBI based earlycon support tty: Add SBI debug console support to HVC SBI driver tty/serial: Add RISC-V SBI debug console based earlycon RISC-V: Add SBI debug console helper routines RISC-V: Add stubs for sbi_console_putchar/getchar() Link: https://lore.kernel.org/r/20231124070905.1043092-1-apatel@ventanamicro.comSigned-off-by:
-
Andrew Jones authored
When the SUSP SBI extension is present it implies that the standard "suspend to RAM" type is available. Wire it up to the generic platform suspend support, also applying the already present support for non-retentive CPU suspend. When the kernel is built with CONFIG_SUSPEND, one can do 'echo mem > /sys/power/state' to suspend. Resumption will occur when a platform-specific wake-up event arrives. Signed-off-by:
Andrew Jones <ajones@ventanamicro.com> Tested-by:
-
Palmer Dabbelt authored
Charlie Jenkins <charlie@rivosinc.com> says: When modules are loaded while there is not ample allocatable memory, there was previously not proper error handling. This series fixes a use-after-free error and a different issue that caused a non graceful exit after memory was not properly allocated. * b4-shazam-merge: riscv: Fix relocation_hashtable size riscv: Correctly free relocation hashtable on error riscv: Fix module loading free order Link: https://lore.kernel.org/r/20240104-module_loading_fix-v3-0-a71f8de6ce0f@rivosinc.comSigned-off-by:
-
Palmer Dabbelt authored
Jisheng Zhang <jszhang@kernel.org> says: Some riscv implementations such as T-HEAD's C906, C908, C910 and C920 support efficient unaligned access, for performance reason we want to enable HAVE_EFFICIENT_UNALIGNED_ACCESS on these platforms. To avoid performance regressions on non efficient unaligned access platforms, HAVE_EFFICIENT_UNALIGNED_ACCESS can't be globally selected. To solve this problem, runtime code patching based on the detected speed is a good solution. But that's not easy, it involves lots of work to modify vairous subsystems such as net, mm, lib and so on. This can be done step by step. So let's take an easier solution: add support to efficient unaligned access and hide the support under NONPORTABLE. patch1 introduces RISCV_EFFICIENT_UNALIGNED_ACCESS which depends on NONPORTABLE, if users know during config time that the kernel will be only run on those efficient unaligned access hw platforms, they can enable it. Obviously, generic unified kernel Image shouldn't enable it. patch2 adds support DCACHE_WORD_ACCESS when MMU and RISCV_EFFICIENT_UNALIGNED_ACCESS. Below test program and step shows how much performance can be improved: $ cat tt.c #include <sys/types.h> #include <sys/stat.h> #include <unistd.h> #define ITERATIONS 1000000 #define PATH "123456781234567812345678123456781" int main(void) { unsigned long i; struct stat buf; for (i = 0; i < ITERATIONS; i++) stat(PATH, &buf); return 0; } $ gcc -O2 tt.c $ touch 123456781234567812345678123456781 $ time ./a.out Per my test on T-HEAD C910 platforms, the above test performance is improved by about 7.5%. * b4-shazam-merge: riscv: select DCACHE_WORD_ACCESS for efficient unaligned access HW riscv: introduce RISCV_EFFICIENT_UNALIGNED_ACCESS Link: https://lore.kernel.org/r/20231225044207.3821-1-jszhang@kernel.orgSigned-off-by:
-
- 10 Jan, 2024 30 commits
-
-
Anup Patel authored
Let us enable SBI based earlycon support in defconfig for both RV32 and RV64 so that "earlycon=sbi" can be used again. Signed-off-by:
Anup Patel <apatel@ventanamicro.com> Reviewed-by:
-
Atish Patra authored
RISC-V SBI specification supports advanced debug console support via SBI DBCN extension. Extend the HVC SBI driver to support it. Signed-off-by:
Atish Patra <atishp@rivosinc.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Link: https://lore.kernel.org/r/20231124070905.1043092-5-apatel@ventanamicro.comSigned-off-by:
-
Anup Patel authored
We extend the existing RISC-V SBI earlycon support to use the new RISC-V SBI debug console extension. Signed-off-by:
-
Anup Patel authored
Let us provide SBI debug console helper routines which can be shared by serial/earlycon-riscv-sbi.c and hvc/hvc_riscv_sbi.c. Signed-off-by:
-
Anup Patel authored
The functions sbi_console_putchar() and sbi_console_getchar() are not defined when CONFIG_RISCV_SBI_V01 is disabled so let us add stub of these functions to avoid "#ifdef" on user side. Signed-off-by:
-
Charlie Jenkins authored
A second dereference is needed to get the accurate size of the relocation_hashtable. Signed-off-by:
Charlie Jenkins <charlie@rivosinc.com> Fixes: d8792a57 ("riscv: Safely remove entries from relocation list") Reported-by:
kernel test robot <lkp@intel.com> Reported-by:
Julia Lawall <julia.lawall@inria.fr> Closes: https://lore.kernel.org/r/202312120044.wTI1Uyaa-lkp@intel.com/Reviewed-by:
Dan Carpenter <dan.carpenter@linaro.org> Link: https://lore.kernel.org/r/20240104-module_loading_fix-v3-3-a71f8de6ce0f@rivosinc.comSigned-off-by:
-
Charlie Jenkins authored
When there is not enough allocatable memory for the relocation hashtable, module loading should exit gracefully. Previously, this was attempted to be accomplished by checking if an unsigned number is less than zero which does not work. Instead have the caller check if the hashtable was correctly allocated and add a comment explaining that hashtable_bits that is 0 is valid. Signed-off-by:
-
Charlie Jenkins authored
Reverse order of kfree calls to resolve use-after-free error. Signed-off-by:
Dan Carpenter <error27@gmail.com> Closes: https://lore.kernel.org/r/202312132019.iYGTwW0L-lkp@intel.com/Reported-by:
-
Jisheng Zhang authored
DCACHE_WORD_ACCESS uses the word-at-a-time API for optimised string comparisons in the vfs layer. This patch implements support for load_unaligned_zeropad in much the same way as has been done for arm64. Here is the test program and step: $ cat tt.c #include <sys/types.h> #include <sys/stat.h> #include <unistd.h> #define ITERATIONS 1000000 #define PATH "123456781234567812345678123456781" int main(void) { unsigned long i; struct stat buf; for (i = 0; i < ITERATIONS; i++) stat(PATH, &buf); return 0; } $ gcc -O2 tt.c $ touch 123456781234567812345678123456781 $ time ./a.out Per my test on T-HEAD C910 platforms, the above test performance is improved by about 7.5%. Signed-off-by:Jisheng Zhang <jszhang@kernel.org> Link: https://lore.kernel.org/r/20231225044207.3821-3-jszhang@kernel.orgSigned-off-by:
-
Jisheng Zhang authored
Some riscv implementations such as T-HEAD's C906, C908, C910 and C920 support efficient unaligned access, for performance reason we want to enable HAVE_EFFICIENT_UNALIGNED_ACCESS on these platforms. To avoid performance regressions on other non efficient unaligned access platforms, HAVE_EFFICIENT_UNALIGNED_ACCESS can't be globally selected. To solve this problem, runtime code patching based on the detected speed is a good solution. But that's not easy, it involves lots of work to modify vairous subsystems such as net, mm, lib and so on. This can be done step by step. So let's take an easier solution: add support to efficient unaligned access and hide the support under NONPORTABLE. Now let's introduce RISCV_EFFICIENT_UNALIGNED_ACCESS which depends on NONPORTABLE, if users know during config time that the kernel will be only run on those efficient unaligned access hw platforms, they can enable it. Obviously, generic unified kernel Image shouldn't enable it. Signed-off-by:
Eric Biggers <ebiggers@google.com> Link: https://lore.kernel.org/r/20231225044207.3821-2-jszhang@kernel.orgSigned-off-by:
-
Palmer Dabbelt authored
Clément Léger <cleger@rivosinc.com> says: This series add support for a few more extensions that are present in the RVA22U64/RVA23U64 (either mandatory or optional) and that are useful for userspace: - Zicond - Zacas - Ztso Series currently based on riscv/for-next. * b4-shazam-lts: riscv: hwprobe: export Zicond extension riscv: hwprobe: export Zacas ISA extension riscv: add ISA extension parsing for Zacas dt-bindings: riscv: add Zacas ISA extension description riscv: hwprobe: export Ztso ISA extension riscv: add ISA extension parsing for Ztso Link: https://lore.kernel.org/r/20231220155723.684081-1-cleger@rivosinc.comSigned-off-by:
-
Clément Léger authored
Export the zicond extension to userspace using hwprobe. Signed-off-by:
Clément Léger <cleger@rivosinc.com> Link: https://lore.kernel.org/r/20231220155723.684081-7-cleger@rivosinc.comSigned-off-by:
-
Clément Léger authored
Export Zacas ISA extension through hwprobe. Signed-off-by:
-
Clément Léger authored
Add parsing for Zacas ISA extension which was ratified recently in the riscv-zacas manual. Signed-off-by:
-
Clément Léger authored
Add description for the Zacas ISA extension which was ratified recently. Signed-off-by:
-
Clément Léger authored
Export the Ztso extension to userspace. Signed-off-by:
-
Clément Léger authored
Add support to parse the Ztso string in the riscv,isa string. The bindings already supports it but not the ISA parsing code. Signed-off-by:
-
Al Viro authored
asm-generic/export.h is a wrapper for linux/export.h, with explicit request to use linux/export.h directly. Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk> Link: https://lore.kernel.org/r/20231214191922.GQ1674809@ZenIVSigned-off-by:
-
Palmer Dabbelt authored
Frederik Haxel <haxel@fzi.de> says: XIP boot seems to be broken for some time now. A likely reason why no one seems to have noticed this is that XIP is more difficult to test, as it is currently not easily testable with QEMU. These patches fix the XIP boot and allow an XIP build without BUILTIN_DTB, which in turn makes it easier to test an image with the QEMU virt machine. * b4-shazam-merge: riscv: Allow disabling of BUILTIN_DTB for XIP riscv: Fixed wrong register in XIP_FIXUP_FLASH_OFFSET macro riscv: Make XIP bootable again Link: https://lore.kernel.org/r/20231212130116.848530-1-haxel@fzi.deSigned-off-by:
-
Song Shuai authored
The commit be97d0db ("riscv: VMAP_STACK overflow detection thread-safe") got rid of `shadow_stack`, so SHADOW_OVERFLOW_STACK_SIZE should be removed too. Fixes: be97d0db ("riscv: VMAP_STACK overflow detection thread-safe") Signed-off-by:
Song Shuai <songshuaishuai@tinylab.org> Reviewed-by:
Sami Tolvanen <samitolvanen@google.com> Link: https://lore.kernel.org/r/20231211110331.359534-1-songshuaishuai@tinylab.orgSigned-off-by:
-
Palmer Dabbelt authored
I don't usually merge these in, but I missed sending a PR due to the holidays. * palmer/fixes: riscv: Fix set_direct_map_default_noflush() to reset _PAGE_EXEC riscv: Fix module_alloc() that did not reset the linear mapping permissions riscv: Fix wrong usage of lm_alias() when splitting a huge linear mapping riscv: Check if the code to patch lies in the exit section riscv: errata: andes: Probe for IOCP only once in boot stage riscv: Fix SMP when shadow call stacks are enabled dt-bindings: perf: riscv,pmu: drop unneeded quotes riscv: fix misaligned access handling of C.SWSP and C.SDSP RISC-V: hwprobe: Always use u64 for extension bits Support rv32 ULEB128 test riscv: Correct type casting in module loading riscv: Safely remove entries from relocation list Signed-off-by: -
Ben Dooks authored
The save_v_state() is technically sending a __user pointer through __put_user() and thus is generating a sparse warning so force the value to be "void *" to fix: arch/riscv/kernel/signal.c:94:16: warning: incorrect type in initializer (different address spaces) arch/riscv/kernel/signal.c:94:16: expected void *__val arch/riscv/kernel/signal.c:94:16: got void [noderef] __user *[assigned] datap Fixes: 8ee0b418 ("riscv: signal: Add sigcontext save/restore for vector") Signed-off-by:
Ben Dooks <ben.dooks@codethink.co.uk> Link: https://lore.kernel.org/r/20231123142708.261733-1-ben.dooks@codethink.co.ukSigned-off-by:
-
Ben Dooks authored
The instruction reading code can read from either user or kernel addresses and thus the use of __user on pointers to instructions depends on which context. Fix a few sparse warnings by using __user for user-accesses and remove it when not. Fixes: arch/riscv/kernel/traps_misaligned.c:361:21: warning: dereference of noderef expression arch/riscv/kernel/traps_misaligned.c:373:21: warning: dereference of noderef expression arch/riscv/kernel/traps_misaligned.c:381:21: warning: dereference of noderef expression arch/riscv/kernel/traps_misaligned.c:322:24: warning: incorrect type in initializer (different address spaces) arch/riscv/kernel/traps_misaligned.c:322:24: expected unsigned char const [noderef] __user *__gu_ptr arch/riscv/kernel/traps_misaligned.c:322:24: got unsigned char const [usertype] *addr arch/riscv/kernel/traps_misaligned.c:361:21: warning: dereference of noderef expression arch/riscv/kernel/traps_misaligned.c:373:21: warning: dereference of noderef expression arch/riscv/kernel/traps_misaligned.c:381:21: warning: dereference of noderef expression arch/riscv/kernel/traps_misaligned.c:332:24: warning: incorrect type in initializer (different address spaces) arch/riscv/kernel/traps_misaligned.c:332:24: expected unsigned char [noderef] __user *__gu_ptr arch/riscv/kernel/traps_misaligned.c:332:24: got unsigned char [usertype] *addr Fixes: 7c832321 ("riscv: add support for misaligned trap handling in S-mode") Signed-off-by:
-
Jisheng Zhang authored
As said in the help of ARCH_WANTS_NO_INSTR entry in arch/Kconfig: "An architecture should select this if the noinstr macro is being used on functions to denote that the toolchain should avoid instrumenting such functions and is required for correctness." Select ARCH_WANTS_NO_INSTR for correctness. PS: The reason we didn't find any issue so far is that the CC_HAS_NO_PROFILE_FN_ATTR is true. Signed-off-by:
-
Palmer Dabbelt authored
Samuel Holland <samuel.holland@sifive.com> says: This series cleans up some duplicated and dead code around the RISC-V CPU operations, that was copied from arm64 but is not needed here. The result is a bit of memory savings and removal of a few SBI calls during boot, with no functional change. * b4-shazam-merge: riscv: Use the same CPU operations for all CPUs riscv: Remove unused members from struct cpu_operations riscv: Deduplicate code in setup_smp() Link: https://lore.kernel.org/r/20231121234736.3489608-1-samuel.holland@sifive.comSigned-off-by:
-
Samuel Holland authored
This file is not used since commit 72f045d1 ("riscv: Fixup difference with defconfig"), where it was replaced by the 32-bit.config fragment. Delete the old file to avoid any confusion. Signed-off-by:
-
Palmer Dabbelt authored
Andrew Jones <ajones@ventanamicro.com> says: This series introduces a flag for the hwprobe syscall which effectively reverses its behavior from getting the values of keys for a set of cpus to getting the cpus for a set of key-value pairs. * b4-shazam-merge: RISC-V: selftests: Add which-cpus hwprobe test RISC-V: hwprobe: Introduce which-cpus flag RISC-V: Move the hwprobe syscall to its own file RISC-V: hwprobe: Clarify cpus size parameter Link: https://lore.kernel.org/r/20231122164700.127954-6-ajones@ventanamicro.comSigned-off-by:
-
Frederik Haxel authored
This enables, among other things, testing with the QEMU virt machine. To build an XIP kernel for the QEMU virt machine, configure the the kernel as desired and apply the following configuration ``` CONFIG_NONPORTABLE=y CONFIG_XIP_KERNEL=y CONFIG_XIP_PHYS_ADDR=0x20000000 CONFIG_PHYS_RAM_BASE=0x80200000 CONFIG_BUILTIN_DTB=n ``` Since the QEMU virt flash memory expects a 32 MB file, the built image must be padded. For example, with `truncate -s 32M arch/riscv/boot/xipImage` The kernel can be started using the following command in QEMU (v8+) ``` qemu-system-riscv64 -M virt,pflash0=pflash0 \ -blockdev node-name=pflash0,driver=file,read-only=on,\ filename=arch/riscv/boot/xipImage <optional parameters> ``` Signed-off-by:
Frederik Haxel <haxel@fzi.de> Link: https://lore.kernel.org/r/20231212130116.848530-4-haxel@fzi.deSigned-off-by:
-
Frederik Haxel authored
During the refactoring, a bug was introduced in the rarly used XIP_FIXUP_FLASH_OFFSET macro. Fixes: bee7fbc3 ("RISC-V CPU Idle Support") Fixes: e7681beb ("RISC-V: Split out the XIP fixups into their own file") Signed-off-by:
-
Frederik Haxel authored
Currently, the XIP kernel seems to fail to boot due to missing XIP_FIXUP and a wrong page_offset value. A superfluous XIP_FIXUP has also been removed. Signed-off-by:
-
- 09 Jan, 2024 4 commits
-
-
Alexandre Ghiti authored
When resetting the linear mapping permissions, we must make sure that we clear the X bit so that do not end up with WX mappings (since we set PAGE_KERNEL). Fixes: 395a21ff ("riscv: add ARCH_HAS_SET_DIRECT_MAP support") Signed-off-by:
Alexandre Ghiti <alexghiti@rivosinc.com> Link: https://lore.kernel.org/r/20231213134027.155327-3-alexghiti@rivosinc.comSigned-off-by:
-
Alexandre Ghiti authored
After unloading a module, we must reset the linear mapping permissions, see the example below: Before unloading a module: 0xffffaf809d65d000-0xffffaf809d6dc000 0x000000011d65d000 508K PTE . .. .. D A G . . W R V 0xffffaf809d6dc000-0xffffaf809d6dd000 0x000000011d6dc000 4K PTE . .. .. D A G . . . R V 0xffffaf809d6dd000-0xffffaf809d6e1000 0x000000011d6dd000 16K PTE . .. .. D A G . . W R V 0xffffaf809d6e1000-0xffffaf809d6e7000 0x000000011d6e1000 24K PTE . .. .. D A G . X . R V After unloading a module: 0xffffaf809d65d000-0xffffaf809d6e1000 0x000000011d65d000 528K PTE . .. .. D A G . . W R V 0xffffaf809d6e1000-0xffffaf809d6e7000 0x000000011d6e1000 24K PTE . .. .. D A G . X W R V The last mapping is not reset and we end up with WX mappings in the linear mapping. So add VM_FLUSH_RESET_PERMS to our module_alloc() definition. Fixes: 0cff8bff ("riscv: avoid the PIC offset of static percpu data in module beyond 2G limits") Signed-off-by:
-
Alexandre Ghiti authored
lm_alias() can only be used on kernel mappings since it explicitly uses __pa_symbol(), so simply fix this by checking where the address belongs to before. Fixes: 311cd2f6 ("riscv: Fix set_memory_XX() and set_direct_map_XX() by splitting huge linear mappings") Reported-by: syzbot+afb726d49f84c8d95ee1@syzkaller.appspotmail.com Closes: https://lore.kernel.org/linux-riscv/000000000000620dd0060c02c5e1@google.com/Signed-off-by:
-
Alexandre Ghiti authored
Otherwise we fall through to vmalloc_to_page() which panics since the address does not lie in the vmalloc region. Fixes: 043cb41a ("riscv: introduce interfaces to patch kernel code") Signed-off-by:
-
- 04 Jan, 2024 1 commit
-
-
Samuel Holland authored
RISC-V provides no binding (ACPI or DT) to describe per-cpu start/stop operations, so cpu_set_ops() will always detect the same operations for every CPU. Replace the cpu_ops array with a single pointer to save space and reduce boot time. Signed-off-by:
-
