- 02 Jun, 2015 1 commit
-
-
Junling Zheng authored
Based on 08adb7da upstream. Commit 281c9c36 (net: compat: Update get_compat_msghdr() to match copy_msghdr_from_user() behaviour) made get_compat_msghdr() return error if msg_sys->msg_namelen was negative, which changed the behaviors of recvmsg and sendmsg syscall in a lib32 system: Before commit 281c9c36, get_compat_msghdr() wouldn't fail and it would return -EINVAL in move_addr_to_user() or somewhere if msg_sys->msg_namelen was invalid and then syscall returned -EINVAL, which is correct. And now, when msg_sys->msg_namelen is negative, get_compat_msghdr() will fail and wants to return -EINVAL, however, the outer syscall will return -EFAULT directly, which is unexpected. This patch gets the return value of get_compat_msghdr() as well as copy_msghdr_from_user(), then returns this expected value if get_compat_msghdr() fails. Fixes: 281c9c36 (net: compat: Update get_compat_msghdr() to match copy_msghdr_from_user() behaviour) Signed-off-by:
Junling Zheng <zhengjunling@huawei.com> Signed-off-by:
Hanbing Xu <xuhanbing@huawei.com> Cc: Li Zefan <lizefan@huawei.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: David Miller <davem@davemloft.net> Signed-off-by:
Luis Henriques <luis.henriques@canonical.com>
-
- 28 May, 2015 39 commits
-
-
Thomas Petazzoni authored
This patch is a partial backport of commit ef01c6c3 ("ARM: mvebu: remove Armada 375 Z1 workaround for I/O coherency"). This commit was merged in v3.19, so kernel versions later than v3.19 are not affected by the problem that this commit fixes. It does not make a lot of sense to backport this commit entirely, since it is mainly removing some no longer useful code. However, this commit is also making sure that the bus_register_notifier that register the custom DMA operations that should be used for HW I/O coherency does not get registered when said HW I/O coherency is not enabled. This is particularly critical since we have decided to disable HW I/O coherency completely in all kernels < 4.0, to be on the safe side, while experimenting a new implementation of the HW I/O coherency in >= 4.0. Without this commit, kernels earlier than 3.18 have the custom DMA operations normally used for HW I/O coherency registered (they don't do cache maintenance operations), while HW I/O coherency is disabled. It essentially causes every DMA transfer to transfer garbage. The issue fixed by this commit was introduced by 5ab5afd8 ("ARM: mvebu: implement Armada 375 coherency workaround"), but it was not visible until now since it didn't cause any problem when HW I/O coherency is enabled. Signed-off-by:
Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Bjørn Mork <bjorn@mork.no> Signed-off-by:
-
Chen Gang authored
commit 9493c242 upstream. Remove 2 redundant extern inline functions: qla8044_set_qsnt_ready() and qla8044_need_reset_handler(). At present, within upstream next kernel source code, they are only used within "drivers/scsi/qla2xxx/qla_nx2.c". The related error and warnings (with allmodconfig under tile): CC [M] drivers/scsi/qla2xxx/qla_nx2.o drivers/scsi/qla2xxx/qla_nx2.c:1633:1: error: static declaration of 'qla8044_need_reset_handler' follows non-static declaration qla8044_need_reset_handler(struct scsi_qla_host *vha) ^ In file included from drivers/scsi/qla2xxx/qla_def.h:3706:0, from drivers/scsi/qla2xxx/qla_nx2.c:11: drivers/scsi/qla2xxx/qla_gbl.h:756:20: note: previous declaration of 'qla8044_need_reset_handler' was here extern inline void qla8044_need_reset_handler(struct scsi_qla_host *vha); ^ drivers/scsi/qla2xxx/qla_gbl.h:756:20: warning: inline function 'qla8044_need_reset_handler' declared but never defined make[3]: *** [drivers/scsi/qla2xxx/qla_nx2.o] Error 1 make[2]: *** [drivers/scsi/qla2xxx] Error 2 make[1]: *** [drivers/scsi] Error 2 make: *** [drivers] Error 2 CC [M] drivers/scsi/qla2xxx/qla_tmpl.o In file included from drivers/scsi/qla2xxx/qla_def.h:3706:0, from drivers/scsi/qla2xxx/qla_tmpl.c:7: drivers/scsi/qla2xxx/qla_gbl.h:755:20: warning: inline function 'qla8044_set_qsnt_ready' declared but never defined extern inline void qla8044_set_qsnt_ready(struct scsi_qla_host *vha); ^ Signed-off-by:
Chen Gang <gang.chen.5i5j@gmail.com> Acked-by:
Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by:
Christoph Hellwig <hch@lst.de> Cc: Philip Müller <philm@manjaro.org> Signed-off-by:
-
Arnd Bergmann authored
commit 0c9f3a65 upstream. The rtl8712 driver has an 'extern inline' function that contains an 'if', which causes lots of warnings with CONFIG_PROFILE_ALL_BRANCHES overriding the definition of 'if': drivers/staging/rtl8712/ieee80211.h:759:229: warning: '______f' is static but declared in inline function 'ieee80211_get_hdrlen' which is not static [enabled by default] This changes the driver to use 'static inline' instead, which happens to be the correct annotation anyway. Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Cc: Larry Finger <Larry.Finger@lwfinger.net> Cc: Florian Schilhabel <florian.c.schilhabel@googlemail.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Philip Müller <philm@manjaro.org> Signed-off-by:
-
gregkh@linuxfoundation.org authored
Patch not upstream as this driver is deleted there. Fix up some "extern inline" functions as they break the build when using a "modern" complier (i.e. gcc5). Signed-off-by:
-
Behan Webster authored
commit 62ec95f8 upstream. rtllib_probe_req is defined as "static inline" in rtllib_softmac.c however it is declared differently as "extern inline" in rtllib_softmac.h. Since it isn't used outside of the scope of rtllib_softmac, it makes sense to remove the incorrect declaration. Signed-off-by:
Behan Webster <behanw@converseincode.com> Suggested-by:
-
Kirill A. Shutemov authored
commit 51b97e35 upstream. Sasha Levin reports: "gcc5 changes the default standard to c11, which makes kernel build unhappy Explicitly define the kernel standard to be gnu89 which should keep everything working exactly like it was before gcc5" There are multiple small issues with the new default, but the biggest issue seems to be that the old - and very useful - GNU extension to allow a cast in front of an initializer has gone away. Patch updated by Kirill: "I'm pretty sure all gcc versions you can build kernel with supports -std=gnu89. cc-option is redunrant. We also need to adjust HOSTCFLAGS otherwise allmodconfig fails for me" Note by Andrew Pinski: "Yes it was reported and both problems relating to this extension has been added to gnu99 and gnu11. Though there are other issues with the kernel dealing with extern inline have different semantics between gnu89 and gnu99/11" End result: we may be able to move up to a newer stdc model eventually, but right now the newer models have some annoying deficiencies, so the traditional "gnu89" model ends up being the preferred one. Signed-off-by:
Sasha Levin <sasha.levin@oracle.com> Singed-off-by:
Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Cc: Philip Müller <philm@manjaro.org> Signed-off-by:
-
Behan Webster authored
commit 6d91857d upstream. With compilers which follow the C99 standard (like modern versions of gcc and clang), "extern inline" does the opposite thing from older versions of gcc (emits code for an externally linkable version of the inline function). "static inline" does the intended behavior in all cases instead. Signed-off-by:
-
Konrad Rzeszutek Wilk authored
commit a6dfa128 upstream. A huge amount of NIC drivers use the DMA API, however if compiled under 32-bit an very important part of the DMA API can be ommitted leading to the drivers not working at all (especially if used with 'swiotlb=force iommu=soft'). As Prashant Sreedharan explains it: "the driver [tg3] uses DEFINE_DMA_UNMAP_ADDR(), dma_unmap_addr_set() to keep a copy of the dma "mapping" and dma_unmap_addr() to get the "mapping" value. On most of the platforms this is a no-op, but ... with "iommu=soft and swiotlb=force" this house keeping is required, ... otherwise we pass 0 while calling pci_unmap_/pci_dma_sync_ instead of the DMA address." As such enable this even when using 32-bit kernels. Reported-by:
Ian Jackson <Ian.Jackson@eu.citrix.com> Signed-off-by:
Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Acked-by:
David S. Miller <davem@davemloft.net> Acked-by:
Prashant Sreedharan <prashant@broadcom.com> Cc: Borislav Petkov <bp@alien8.de> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Michael Chan <mchan@broadcom.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: boris.ostrovsky@oracle.com Cc: cascardo@linux.vnet.ibm.com Cc: david.vrabel@citrix.com Cc: sanjeevb@broadcom.com Cc: siva.kallam@broadcom.com Cc: vyasevich@gmail.com Cc: xen-devel@lists.xensource.com Link: http://lkml.kernel.org/r/20150417190448.GA9462@l.oracle.comSigned-off-by:
Ingo Molnar <mingo@kernel.org> Cc: Ben Hutchings <ben@decadent.org.uk> Signed-off-by:
-
Mark Rutland authored
commit c0978773 upstream. arm64 builds with GCC 5 have caused the __asmeq assertions in the PSCI calling code to fire, so move the ARM PSCI calls out of line into their own assembly file for consistency and to safeguard against the same issue occuring with the 32-bit toolchain. [will: brought into line with arm64 implementation] Reported-by:
Andy Whitcroft <apw@canonical.com> Signed-off-by:
Mark Rutland <mark.rutland@arm.com> Signed-off-by:
Will Deacon <will.deacon@arm.com> Signed-off-by:
Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by:
-
Alexey Khoroshilov authored
commit bc26d4d0 upstream. A deadlock can be initiated by userspace via ioctl(SNDCTL_SEQ_OUTOFBAND) on /dev/sequencer with TMR_ECHO midi event. In this case the control flow is: sound_ioctl() -> case SND_DEV_SEQ: case SND_DEV_SEQ2: sequencer_ioctl() -> case SNDCTL_SEQ_OUTOFBAND: spin_lock_irqsave(&lock,flags); play_event(); -> case EV_TIMING: seq_timing_event() -> case TMR_ECHO: seq_copy_to_input() -> spin_lock_irqsave(&lock,flags); It seems that spin_lock_irqsave() around play_event() is not necessary, because the only other call location in seq_startplay() makes the call without acquiring spinlock. So, the patch just removes spinlocks around play_event(). By the way, it removes unreachable code in seq_timing_event(), since (seq_mode == SEQ_2) case is handled in the beginning. Compile tested only. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by:
Alexey Khoroshilov <khoroshilov@ispras.ru> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Dean Nelson authored
commit 2cff98b9 upstream. __dma_alloc() does a PAGE_ALIGN() on the passed in size argument before doing anything else. __dma_free() does not. And because it doesn't, it is possible to leak memory should size not be an integer multiple of PAGE_SIZE. The solution is to add a PAGE_ALIGN() to __dma_free() like is done in __dma_alloc(). Additionally, this patch removes a redundant PAGE_ALIGN() from __dma_alloc_coherent(), since __dma_alloc_coherent() can only be called from __dma_alloc(), which already does a PAGE_ALIGN() before the call. Acked-by:
Catalin Marinas <catalin.marinas@arm.com> Signed-off-by:
Dean Nelson <dnelson@redhat.com> Signed-off-by:
-
Hans Ulli Kroll authored
commit 31fc835f upstream. This patch fixes a compiler warning in gemini_restart() issued by commit 7b6d864b ("reboot:arm: reboot_mode changes from char to enum reboot_mode"). arch/arm/mach-gemini/board-rut1xx.c:93:2: warning: initialization from incompatible pointer type The warning is harmless, and the patch does not need to be backported to stable kernels. Fixes: 7b6d864b ("reboot:arm: reboot_mode changes from char to enum reboot_mode.") Signed-off-by:
Hans Ulli Kroll <ulli.kroll@googlemail.com> Signed-off-by:
-
Toshiaki Makita authored
commit 2439fc4d upstream. adapter->tx_ring is set to NULL where rx_ring should be. Fixes: 5536d210 ("igb: Combine q_vector and ring allocation into a single function") Signed-off-by:
Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp> Tested-by:
Aaron Brown <aaron.f.brown@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by:
-
Toshiaki Makita authored
commit c0a06ee1 upstream. When changing the number of rings by ethtool -L, q_vectors are reused, which causes oops because of uninitialized pointers. - When an rx is reused as a tx, q_vector->rx.ring is not set to NULL, which misleads igb_poll() to determine that it has an rx ring although it actually points to the tx ring. - When a tx is reused as an rx, q_vector->rx.ring->skb (q_vector->ring[0].skb) has a value that was used as tx_stats before. Fix these problems by zeroing it out on reuseing it. Fixes: 02ef6e1d ("igb: Fix queue allocation method to accommodate changing during runtime") Signed-off-by:
-
Pelle Nilsson authored
commit 7d0ec8b6 upstream. Some controller drivers have no need of this callback (spi-altera even causes a NULL pointer dereference because it doesn't register the callback, falsely assuming that it is already optional). Fixes: 30af9b55 ("spi/bitbang: Drop empty setup() functions") Signed-off-by:
Pelle Nilsson <per.nilsson@xelmo.com> Reviewed-by:
Ezequiel Garcia <ezequiel.garcia@vanguardiasur.com.ar> Signed-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
-
Mel Gorman authored
commit b0dc2b9b upstream. NUMA balancing is meant to be disabled by default on UMA machines but the check is using nr_node_ids (highest node) instead of num_online_nodes (online nodes). The consequences are that a UMA machine with a node ID of 1 or higher will enable NUMA balancing. This will incur useless overhead due to minor faults with the impact depending on the workload. These are the impact on the stats when running a kernel build on a single node machine whose node ID happened to be 1: vanilla patched NUMA base PTE updates 5113158 0 NUMA huge PMD updates 643 0 NUMA page range updates 5442374 0 NUMA hint faults 2109622 0 NUMA hint local faults 2109622 0 NUMA hint local percent 100 100 NUMA pages migrated 0 0 Signed-off-by:
Mel Gorman <mgorman@suse.de> Reviewed-by:
Rik van Riel <riel@redhat.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
Darrick J. Wong authored
commit e531d0bc upstream. The journal revoke block recovery code does not check r_count for sanity, which means that an evil value of r_count could result in the kernel reading off the end of the revoke table and into whatever garbage lies beyond. This could crash the kernel, so fix that. However, in testing this fix, I discovered that the code to write out the revoke tables also was not correctly checking to see if the block was full -- the current offset check is fine so long as the revoke table space size is a multiple of the record size, but this is not true when either journal_csum_v[23] are set. Signed-off-by:
Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by:
Theodore Ts'o <tytso@mit.edu> Reviewed-by:
Jan Kara <jack@suse.cz> Signed-off-by:
-
Eryu Guan authored
commit 2f974865 upstream. The following commit introduced a bug when checking for zero length extent 5946d089 ext4: check for overlapping extents in ext4_valid_extent_entries() Zero length extent could pass the check if lblock is zero. Adding the explicit check for zero length back. Signed-off-by:
Eryu Guan <guaneryu@gmail.com> Signed-off-by:
-
Lukas Czerner authored
commit 9d506594 upstream. Currently when journal restart fails, we'll have the h_transaction of the handle set to NULL to indicate that the handle has been effectively aborted. We handle this situation quietly in the jbd2_journal_stop() and just free the handle and exit because everything else has been done before we attempted (and failed) to restart the journal. Unfortunately there are a number of problems with that approach introduced with commit 41a5b913 "jbd2: invalidate handle if jbd2_journal_restart() fails" First of all in ext4 jbd2_journal_stop() will be called through __ext4_journal_stop() where we would try to get a hold of the superblock by dereferencing h_transaction which in this case would lead to NULL pointer dereference and crash. In addition we're going to free the handle regardless of the refcount which is bad as well, because others up the call chain will still reference the handle so we might potentially reference already freed memory. Moreover it's expected that we'll get aborted handle as well as detached handle in some of the journalling function as the error propagates up the stack, so it's unnecessary to call WARN_ON every time we get detached handle. And finally we might leak some memory by forgetting to free reserved handle in jbd2_journal_stop() in the case where handle was detached from the transaction (h_transaction is NULL). Fix the NULL pointer dereference in __ext4_journal_stop() by just calling jbd2_journal_stop() quietly as suggested by Jan Kara. Also fix the potential memory leak in jbd2_journal_stop() and use proper handle refcounting before we attempt to free it to avoid use-after-free issues. And finally remove all WARN_ON(!transaction) from the code so that we do not get random traces when something goes wrong because when journal restart fails we will get to some of those functions. Signed-off-by:
Lukas Czerner <lczerner@redhat.com> Signed-off-by:
-
Jean Delvare authored
commit 5c1ac56b upstream. In function dmi_present(), dmi_walk_early() calls dmi_table(), which calls dmi_decode(), which ultimately calls dmi_save_uuid(). This last function makes a decision based on the value of global variable dmi_ver. The problem is that this variable is set right _after_ dmi_walk_early() returns. So dmi_save_uuid() always sees dmi_ver == 0 regardless of the actual version implemented. This causes /sys/class/dmi/id/product_uuid to always use the old ordering even on systems implementing DMI/SMBIOS 2.6 or later, which should use the new ordering. This is broken since kernel v3.8 for legacy DMI implementations and since kernel v3.10 for SMBIOS 2 implementations. SMBIOS 3 implementations with the 64-bit entry point are not affected. The first breakage does not matter much as in practice legacy DMI implementations are always for versions older than 2.6, which is when the UUID ordering changed. The second breakage is more problematic as it affects the vast majority of x86 systems manufactured since 2009. Signed-off-by:
Jean Delvare <jdelvare@suse.de> Fixes: 9f9c9cbb ("drivers/firmware/dmi_scan.c: fetch dmi version from SMBIOS if it exists") Fixes: 79bae42d ("dmi_scan: refactor dmi_scan_machine(), {smbios,dmi}_present()") Acked-by:
Zhenzhong Duan <zhenzhong.duan@oracle.com> Cc: Ben Hutchings <ben@decadent.org.uk> Cc: Artem Savkov <artem.savkov@gmail.com> Cc: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org> Cc: Matt Fleming <matt.fleming@intel.com> [ luis: backported to 3.16: adjusted context ] Signed-off-by:
-
Helge Deller authored
commit d045c77c upstream. On architectures where the stack grows upwards (CONFIG_STACK_GROWSUP=y, currently parisc and metag only) stack randomization sometimes leads to crashes when the stack ulimit is set to lower values than STACK_RND_MASK (which is 8 MB by default if not defined in arch-specific headers). The problem is, that when the stack vm_area_struct is set up in fs/exec.c, the additional space needed for the stack randomization (as defined by the value of STACK_RND_MASK) was not taken into account yet and as such, when the stack randomization code added a random offset to the stack start, the stack effectively got smaller than what the user defined via rlimit_max(RLIMIT_STACK) which then sometimes leads to out-of-stack situations and crashes. This patch fixes it by adding the maximum possible amount of memory (based on STACK_RND_MASK) which theoretically could be added by the stack randomization code to the initial stack size. That way, the user-defined stack size is always guaranteed to be at minimum what is defined via rlimit_max(RLIMIT_STACK). This bug is currently not visible on the metag architecture, because on metag STACK_RND_MASK is defined to 0 which effectively disables stack randomization. The changes to fs/exec.c are inside an "#ifdef CONFIG_STACK_GROWSUP" section, so it does not affect other platformws beside those where the stack grows upwards (parisc and metag). Signed-off-by:
Helge Deller <deller@gmx.de> Cc: linux-parisc@vger.kernel.org Cc: James Hogan <james.hogan@imgtec.com> Cc: linux-metag@vger.kernel.org Signed-off-by:
-
Alex Deucher authored
commit fcf3b542 upstream. Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
-
Tatyana Nikolova authored
commit ec04847c upstream. The string iwpm_ulib_name is recorded in a nlmsg as a netlink attribute. Without this fix parsing of the nlmsg by the userspace port mapper service fails because of unknown attribute length, causing the port mapper service not to register the client, which has sent the nlmsg. Signed-off-by:
Tatyana Nikolova <tatyana.e.nikolova@intel.com> Reviewed-By:
Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Signed-off-by:
Doug Ledford <dledford@redhat.com> Signed-off-by:
-
Christian König authored
commit 607d4806 upstream. The mapping range is inclusive between starting and ending addresses. Signed-off-by:
Christian König <christian.koenig@amd.com> Signed-off-by:
-
Stephane Eranian authored
commit 44b11fee upstream. This patch enables RAPL counters (energy consumption counters) support for Intel Broadwell-U processors (Model 61): To use: $ perf stat -a -I 1000 -e power/energy-cores/,power/energy-pkg/,power/energy-ram/ sleep 10 Signed-off-by:
Stephane Eranian <eranian@google.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: jacob.jun.pan@linux.intel.com Cc: kan.liang@intel.com Cc: peterz@infradead.org Cc: sonnyrao@chromium.org Link: http://lkml.kernel.org/r/20150423070709.GA4970@thinkpadSigned-off-by:
-
Oleg Nesterov authored
commit ef7254a5 upstream. Change HOST_EXTRACFLAGS to include arch/x86/include/uapi along with include/uapi. This looks more consistent, and this fixes "make bzImage" on my old distro which doesn't have asm/bitsperlong.h in /usr/include/. Signed-off-by:
Oleg Nesterov <oleg@redhat.com> Signed-off-by:
Borislav Petkov <bp@suse.de> Acked-by:
Andy Lutomirski <luto@kernel.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Thomas Gleixner <tglx@linutronix.de> Fixes: 6f121e54 ("x86, vdso: Reimplement vdso.so preparation in build-time C") Link: http://lkml.kernel.org/r/1431332153-18566-6-git-send-email-bp@alien8.de Link: http://lkml.kernel.org/r/20150507165835.GB18652@redhat.comSigned-off-by:
-
Tommi Kyntola authored
commit 0a4f59d6 upstream. The build-time tool arch/x86/vdso/vdso2c.c includes <linux/elf.h>, but cannot find it, unless the build host happens to provide it. It should be reading the uapi linux/elf.h This build regression came along with the vdso2c changes between v3.15 and v3.16. Signed-off-by:
Tommi Kyntola <tommi.kyntola@gmail.com> Signed-off-by:
Andy Lutomirski <luto@amacapital.net> Link: http://lkml.kernel.org/r/1525002.3cJ7BySVpA@musta Link: http://lkml.kernel.org/r/efe1ec29eda830b1d0030882706f3dac99ce1f73.1427482099.git.luto@kernel.orgSigned-off-by:
-
Nicolas Schichan authored
commit 19fc99d0 upstream. In that case, emit_udiv() will be called with rn == ARM_R0 (r_scratch) and loading rm first into ARM_R0 will result in jit_udiv() function being called the same dividend and divisor. Fix that by loading rn first into ARM_R1 and then rm into ARM_R0. Signed-off-by:
Nicolas Schichan <nschichan@freebox.fr> Fixes: aee636c4 (bpf: do not use reciprocal divide) Acked-by:
Mircea Gherzan <mgherzan@gmail.com> Signed-off-by:
-
Pan Xinhui authored
commit 8f9cfeed upstream. when gsmtty_remove put dlci, it will cause memory leak if dlci->port's refcount is zero. So we do the cleanup work in .cleanup callback instead. dlci will be last put in two call chains. 1) gsmld_close -> gsm_cleanup_mux -> gsm_dlci_release -> dlci_put 2) gsmld_remove -> dlci_put so there is a race. the memory leak depends on the race. In call chain 2. we hit the memory leak. below comment tells. release_tty -> tty_driver_remove_tty -> gsmtty_remove -> dlci_put -> tty_port_destructor (WARN_ON(port->itty) and return directly) | tty->port->itty = NULL; | tty_kref_put ---> release_one_tty -> gsmtty_cleanup (added by our patch) So our patch fix the memory leak by doing the cleanup work after tty core did. Signed-off-by:
Pan Xinhui <xinhuix.pan@intel.com> Fixes: dfabf7ffAcked-by:
Jiri Slaby <jslaby@suse.cz> Signed-off-by:
-
Dan Williams authored
commit dbfe8ef5 upstream. Avoton AHCI occasionally sees drive probe timeouts at driver load time. When this happens SCR_STATUS indicates device detected, but no D2H FIS reception. Reset the internal link state machines by bouncing port-enable in the PCS register when this occurs. Signed-off-by:
Dan Williams <dan.j.williams@intel.com> Signed-off-by:
Tejun Heo <tj@kernel.org> Signed-off-by:
-
Hans de Goede authored
commit 17211509 upstream. Without this flag some versions of these enclosures do not work. Reported-and-tested-by:
Christian Schaller <cschalle@redhat.com> Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
-
Sławomir Demeszko authored
commit 892c89d5 upstream. Fix regression introduced by commit <29ef8a53>. After it writing AT commands to /dev/GCT-ATM0 is unsuccessful (no echo, no response) and dmesg show "gdmtty: invalid payload : 1 16 f011". Before that commit value of dummy_cnt was only a padding size. After using ALIGN() this value is increased by its first argument. So the following usage of this variable needs correction. Signed-off-by:
Sławomir Demeszko <s.demeszko@wireless-instruments.com> Signed-off-by:
-
Joe Lawrence authored
commit 948fa135 upstream. If the xHCI host controller has died (ie, device removed) or suffered other serious fatal error (STS_FATAL), then xhci_irq should handle this condition with IRQ_HANDLED instead of -ESHUTDOWN. Signed-off-by:
Joe Lawrence <joe.lawrence@stratus.com> Signed-off-by:
Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by:
-
Mathias Nyman authored
commit 18cc2f4c upstream. Our event ring consists of only one segment, and we risk filling the event ring in case we get isoc transfers with short intervals such as webcams that fill a TD every microframe (125us) With 64 TRB segment size one usb camera could fill the event ring in 8ms. A setup with several cameras and other devices can fill up the event ring as it is shared between all devices. This has occurred when uvcvideo queues 5 * 32TD URBs which then get cancelled when the video mode changes. The cancelled URBs are returned in the xhci interrupt context and blocks the interrupt handler from handling the new events. A full event ring will block xhci from scheduling traffic and affect all devices conneted to the xhci, will see errors such as Missed Service Intervals for isoc devices, and and Split transaction errors for LS/FS interrupt devices. Increasing the TRB_PER_SEGMENT will also increase the default endpoint ring size, which is welcome as for most isoc transfer we had to dynamically expand the endpoint ring anyway to be able to queue the 5 * 32TDs uvcvideo queues. The default size used to be 64 TRBs per segment Signed-off-by:
-
Mathias Nyman authored
commit d104d015 upstream. Isoc TDs usually consist of one TRB, sometimes two. When all goes well we receive only one success event for a TD, and move the dequeue pointer to the next TD. This fails if the TD consists of two TRBs and we get a transfer error on the first TRB, we will then see two events for that TD. Fix this by making sure the event we get is for the last TRB in that TD before moving the dequeue pointer to the next TD. This will resolve some of the uvc and dvb issues with the "ERROR Transfer event TRB DMA ptr not part of current TD" error message Signed-off-by:
-
Thomas Gleixner authored
commit 0782e63b upstream. Ronny reported that the following scenario is not handled correctly: T1 (prio = 10) lock(rtmutex); T2 (prio = 20) lock(rtmutex) boost T1 T1 (prio = 20) sys_set_scheduler(prio = 30) T1 prio = 30 .... sys_set_scheduler(prio = 10) T1 prio = 30 The last step is wrong as T1 should now be back at prio 20. Commit c365c292 ("sched: Consider pi boosting in setscheduler()") only handles the case where a boosted tasks tries to lower its priority. Fix it by taking the new effective priority into account for the decision whether a change of the priority is required. Reported-by:
Ronny Meeus <ronny.meeus@gmail.com> Tested-by:
Steven Rostedt <rostedt@goodmis.org> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by:
-
NeilBrown authored
commit 6e9eac2d upstream. If any memory allocation in resize_stripes fails we will return -ENOMEM, but in some cases we update conf->pool_size anyway. This means that if we try again, the allocations will be assumed to be larger than they are, and badness results. So only update pool_size if there is no error. This bug was introduced in 2.6.17 and the patch is suitable for -stable. Fixes: ad01c9e3 ("[PATCH] md: Allow stripes to be expanded in preparation for expanding an array") Signed-off-by:
NeilBrown <neilb@suse.de> Signed-off-by:
-
Rafael J. Wysocki authored
commit b9a5e5e1 upstream. Since acpi_reserve_resources() is defined as a device_initcall(), there's no guarantee that it will be executed in the right order with respect to the rest of the ACPI initialization code. On some systems this leads to breakage if, for example, the address range that should be reserved for the ACPI fixed registers is given to the PCI host bridge instead if the race is won by the wrong code path. Fix this by turning acpi_reserve_resources() into a void function and calling it directly from within the ACPI initialization sequence. Reported-and-tested-by:
George McCollister <george.mccollister@gmail.com> Link: http://marc.info/?t=143092384600002&r=1&w=2Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
-
Martin K. Petersen authored
commit 9a9324d3 upstream. The queued TRIM problems appear to be generic to Samsung's firmware and not tied to a particular model. A recent update to the 840 EVO firmware introduced the same issue as we saw on 850 Pro. Blacklist queued TRIM on all 800-series drives while we work this issue with Samsung. Reported-by:
Günter Waller <g.wal@web.de> Reported-by:
Sven Köhler <sven.koehler@gmail.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
