- 20 Aug, 2019 1 commit
-
-
Maxime Ripard authored
Since the introduction of the driver, a new managed helper for the dmaengine PCM registration has been created. Let's use it to simplify a bit our probe and remove functions. Signed-off-by:
Maxime Ripard <maxime.ripard@bootlin.com> Link: https://lore.kernel.org/r/606d271187091e858e8c15e20555af0b79798fe1.1566242458.git-series.maxime.ripard@bootlin.comSigned-off-by:
Mark Brown <broonie@kernel.org>
-
- 16 Aug, 2019 4 commits
-
-
Pierre-Louis Bossart authored
Even if ALH has no specific configuration, we still need to handle the common parameters for all DAIs Signed-off-by:
Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20190815192018.30570-5-pierre-louis.bossart@linux.intel.comSigned-off-by:
-
Pierre-Louis Bossart authored
The Audio Link Hub DAI does not require any static configuration from topology for now. We still need to pass the frame rate and format to firmware. Signed-off-by:
-
Bard liao authored
Rename SOUNDWIRE to ALH. Signed-off-by:
Bard liao <yung-chuan.liao@linux.intel.com> Signed-off-by:
-
Daniel Baluta authored
Add dummy support for SAI/ESAI digital audio interface IPs found on i.MX8 boards. Signed-off-by:
Daniel Baluta <daniel.baluta@nxp.com> Signed-off-by:
-
- 15 Aug, 2019 23 commits
-
-
Pan Xiuli authored
Add Kconfig, PCI ID and chip info for EHL platform. Note that the core mask is different from previous platforms, only Core0 can be controlled by the host. Additional patches will be required for multi-core functionality. Signed-off-by:
Pan Xiuli <xiuli.pan@linux.intel.com> Signed-off-by:
-
Pan Xiuli authored
There are no upstream machine drivers just yet so just add dummy table for compilation in nocodec-mode. Signed-off-by:
-
Pan Xiuli authored
Add Kconfig, PCI ID and chip info for Tiger Lake platform. Note that the core mask is different from previous platforms, only Core0 can be controlled by the host. Additional patches will be required for multi-core functionality. Signed-off-by:
-
Pan Xiuli authored
Initial support for TGL w/ RT1308 Signed-off-by:
-
Pierre-Louis Bossart authored
The only configuration parameter is the ALH stream ID. No range checking is done by the driver, the firmware should check that the stream is valid for a specific hardware. Bump the ABI Minor number to keep the alignment with SOF firmware Signed-off-by:
-
Mac Chiang authored
reuse and add Cometlake support with: SSP0 for DA7219 headphone codec SSP1 for MAX98357a speaker amp codec Signed-off-by:
Mac Chiang <mac.chiang@intel.com> Acked-by:
-
Peter Ujfalusi authored
The pcm_mutex is used to prevent concurrent execution of snd_pcm_ops callbacks. This works fine most of the cases but it can not handle setups when the same DAI is used by different rtd, for example: pcm3168a have two DAIs: one for Playback and one for Capture. If the codec is connected to a single CPU DAI we need to have two dai_link to support both playback and capture. In this case the snd_pcm_ops callbacks can be executed in parallel causing unexpected races in DAI drivers. By moving the pcm_mutex up to card level this can be solved while - hopefully - not breaking other setups. Signed-off-by:
Peter Ujfalusi <peter.ujfalusi@ti.com> Tested-by:
-
YueHaibing authored
sound/soc/codecs/88pm860x-codec.c:533:38: warning: pcm_switch_controls defined but not used [-Wunused-const-variable=] sound/soc/codecs/88pm860x-codec.c:560:38: warning: aif1_mux defined but not used [-Wunused-const-variable=] They are never used, so can be removed. Reported-by:
Hulk Robot <hulkci@huawei.com> Signed-off-by:
YueHaibing <yuehaibing@huawei.com> Link: https://lore.kernel.org/r/20190815092547.29564-1-yuehaibing@huawei.comSigned-off-by:
-
YueHaibing authored
sound/soc/codecs/cs42l56.c:206:30: warning: adc_swap_enum defined but not used [-Wunused-const-variable=] It is never used, so can be removed. Reported-by:
-
YueHaibing authored
It seems 'es8328_rline_enum' should be used in es8328_right_line_controls Fixes: 567e4f98 ("ASoC: add es8328 codec driver") Signed-off-by:
-
YueHaibing authored
sound/soc/codecs/es8328.c:102:35: warning: pga_tlv defined but not used [-Wunused-const-variable=] They are never used, so can be removed. Reported-by:
-
YueHaibing authored
sound/soc/codecs/tlv320aic31xx.c:261:29: warning: cm_m_enum defined but not used [-Wunused-const-variable=] It is never used, so can be removed. Reported-by:
-
YueHaibing authored
sound/soc/codecs/tlv320aic23.c:70:29: warning: tlv320aic23_rec_src defined but not used [-Wunused-const-variable=] It is never used, so can be removed. Reported-by:
-
YueHaibing authored
sound/soc/codecs/rt1011.c:981:35: warning: dac_vol_tlv defined but not used [-Wunused-const-variable=] sound/soc/codecs/rt1011.c:982:35: warning: adc_vol_tlv defined but not used [-Wunused-const-variable=] They are never used, so can be removed. Signed-off-by:
-
YueHaibing authored
sound/soc/codecs/max98371.c:157:35: warning: max98371_noload_gain_tlv defined but not used [-Wunused-const-variable=] It is never used, so can be removed. Reported-by:
-
YueHaibing authored
sound/soc/codecs/cs4349.c:358:32: warning: cs4349_runtime_pm defined but not used [-Wunused-const-variable=] cs4349_runtime_pm ops already defined, it seems we should enable it. Reported-by:
-
YueHaibing authored
sound/soc/codecs/cs42l73.c:276:38: warning: vsp_output_mux defined but not used [-Wunused-const-variable=] sound/soc/codecs/cs42l73.c:279:38: warning: xsp_output_mux defined but not used [-Wunused-const-variable=] They are never used, so can be removed. Reported-by:
-
Andy Shevchenko authored
Instead of using two additional "%s" specifiers, put the constant string literals directly to the format specifier. Cc: Liam Girdwood <lgirdwood@gmail.com> Cc: Mark Brown <broonie@kernel.org> Cc: Vinod Koul <vkoul@kernel.org> Signed-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20190621113116.47525-1-andriy.shevchenko@linux.intel.comSigned-off-by:
-
Jiaxin Yu authored
Most dmics produce a high level when they receive clock. The difference between power-on and memory record time is about 10ms, but the dmic needs 50ms to output normal data. This commit add 100ms delay after SoC output clock so that we can cut off the pop noise at the beginning. Signed-off-by:
Jiaxin Yu <jiaxin.yu@mediatek.com> Link: https://lore.kernel.org/r/1564980997-11359-1-git-send-email-jiaxin.yu@mediatek.comSigned-off-by:
-
YueHaibing authored
sound/soc/mediatek/mt8183/mt8183-mt6358-ts3a227-max98357.c:50:1: warning: mt8183_mt6358_ts3a227_max98357_dapm_widgets defined but not used [-Wunused-const-variable=] sound/soc/mediatek/mt8183/mt8183-mt6358-ts3a227-max98357.c:55:1: warning: mt8183_mt6358_ts3a227_max98357_dapm_routes defined but not used [-Wunused-const-variable=] They are never used, so can be removed. Reported-by:
-
YueHaibing authored
sound/soc/mediatek/mt8183/mt8183-da7219-max98357.c:120:1: warning: mt8183_da7219_max98357_dapm_widgets defined but not used [-Wunused-const-variable=] sound/soc/mediatek/mt8183/mt8183-da7219-max98357.c:124:40: warning: mt8183_da7219_max98357_dapm_routes defined but not used [-Wunused-const-variable=] They are never used, so can be removed. Reported-by:
-
YueHaibing authored
sound/soc/mediatek/mt2701/mt2701-afe-pcm.c:799:38: warning: mt2701_afe_o23_mix defined but not used [-Wunused-const-variable=] sound/soc/mediatek/mt2701/mt2701-afe-pcm.c:803:38: warning: mt2701_afe_o24_mix defined but not used [-Wunused-const-variable=] sound/soc/mediatek/mt2701/mt2701-afe-pcm.c:835:38: warning: mt2701_afe_multi_ch_out_i2s4 defined but not used [-Wunused-const-variable=] They are never used, so can be removed. Reported-by:
-
YueHaibing authored
If CONFIG_DMI is not set, gcc warns: sound/soc/soc-core.c:81:27: warning: dmi_blacklist defined but not used [-Wunused-const-variable=] Add #ifdef guard around it. Reported-by:
-
- 13 Aug, 2019 3 commits
-
-
Pierre-Louis Bossart authored
The recent change to remove the bus->io_ops callbacks used an older version of the SOF code base, and when merged into Mark's for-next it invalidated changes, resulting in broken compilation identified by kbuild and reproduced during the weekly SOF rebase. Restore SOF code overridden by git merge and apply Takashi's intended change in the 'right' location. Fixes: c2f16a94 ("Merge branch 'topic/hda-bus-ops-cleanup'") Reported-by:
kbuild test robot <lkp@intel.com> Cc: Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Pierre-Louis Bossart authored
Recent changes in the common IPC code introduced a build warning with size_t fields, use the correct %zu format. include/linux/dynamic_debug.h:82:16: warning: format '%lu' expects argument of type 'long unsigned int', but argument 4 has type 'size_t' [-Wformat=] Fixes: abf31fee ('ASoC: Intel: Update request-reply IPC model') Reported-by:
Cezary Rojewski <cezary.rojewski@intel.com> Link: https://lore.kernel.org/r/20190812140305.17570-1-pierre-louis.bossart@linux.intel.comSigned-off-by:
-
Masanari Iida authored
This patch fixes some spelling typo in Kconfig. Signed-off-by:
Masanari Iida <standby24x7@gmail.com> Acked-by:
-
- 12 Aug, 2019 9 commits
-
-
Pierre-Louis Bossart authored
The SOF project maintains 6 topologies for HDaudio (iDisp or HDaudio+iDisp, no DMIC, 2 DMICs, 4 DMICs). The user is currently required to manually rename the topology file used in /lib/firmware/intel/sof-tplg. We can do better to avoid such renames and use logic to select the relevant file. The NHLT information can be used to figure out which topology file should be used. Alternatively, when NHLT is not present in ACPI tables or is possibly incorrect, a module parameter can provide that information, e.g. on Up^2 board with the test DMIC kit. Tested on Up^2 board and Acer Swift-SF314-55 Signed-off-by:
-
Peter Ujfalusi authored
When using right_j format and the codec is slave it can support 16bit format, but only if slot_width == 16, in the same DAI mode the 24 bit audio can work with 24 or 32 slot_width. Because of this, the codec and CPU needs to be reconfigured when the sample format changes. Signed-off-by:
-
Peter Ujfalusi authored
The DAC and ADC path of the codec is independent, have dedicated LRCK (FS) and BCK for DAC/ADC. They can be configured to use different format, TDM slots and slot_width if needed. Move these parameters under dedicated io_params structure and manage them independently based on the dai. Signed-off-by:
-
Keyon Jie authored
Adding DAPM MIC endpoint widget "SoC DMIC" and route, to enable DMIC DAPM support with hda generic machine. Signed-off-by:
Keyon Jie <yang.jie@linux.intel.com> Signed-off-by:
-
Keyon Jie authored
The hda generic machine actually has dependency on the dmic driver, select SND_SOC_DMIC at the machine selected to fix it. Signed-off-by:
-
Sathya Prakash M R authored
The generic machine driver of sof_rt5682 supports more platforms of same product family. hence match the product family instead of product name. Signed-off-by:
Sathya Prakash M R <sathya.prakash.m.r@intel.com> Signed-off-by:
-
Szymon Mielczarek authored
By resetting the cached number of endpoints for all card's widgets we may overwrite previously cached values for other streams. The situation may happen especially when running streams simultaneously. Signed-off-by:
Szymon Mielczarek <szymonx.mielczarek@linux.intel.com> Link: https://lore.kernel.org/r/20190809084034.26220-1-szymonx.mielczarek@linux.intel.comSigned-off-by:
-
Jaska Uimonen authored
Currently when loading sof process components there's a check if binary control data is associated with it. If found the data is extracted to be part of component loading and initialization. If binary data exceeds the ipc max size, loading fails with error as large message support is only implemented in set_get_data method. So make the process loading use set_get_data to enable large parameters in component initialization. Also refactor the process component loading function as it digs out 3 times almost identical information of related controls. This is redundant, looks ugly and makes it difficult to understand the mechanism. So make a function out of fetching the control data and use it in process loading. Signed-off-by:
Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Signed-off-by:
Jaska Uimonen <jaska.uimonen@intel.com> Signed-off-by:
-
Shengjiu Wang authored
Add new compatible string "fsl,imx6ull-esai" in the binding document. Signed-off-by:
Shengjiu Wang <shengjiu.wang@nxp.com> Acked-by:
Nicolin Chen <nicoleotsuka@gmail.com> Link: https://lore.kernel.org/r/1565346467-5769-2-git-send-email-shengjiu.wang@nxp.comSigned-off-by:
-
