Skip to content

L
linux
Switch branch/tag
  1. 27 Jun, 2017 6 commits
  3. 23 Jun, 2017 1 commit
    • Balbir Singh's avatar
      powerpc/mm: Trace tlbie(l) instructions · 0428491c
      Balbir Singh authored 
      Add a trace point for tlbie(l) (Translation Lookaside Buffer Invalidate
Entry (Local)) instructions.

The tlbie instruction has changed over the years, so not all versions
accept the same operands. Use the ISA v3 field operands because they are
the most verbose, we may change them in future.

Example output:

  qemu-system-ppc-5371  [016]  1412.369519: tlbie:
  	tlbie with lpid 0, local 1, rb=67bd8900174c11c1, rs=0, ric=0 prs=0 r=0
Signed-off-by: default avatarBalbir Singh <bsingharora@gmail.com>
[mpe: Add some missing trace_tlbie()s, reword change log]
Signed-off-by: default avatarMichael Ellerman <mpe@ellerman.id.au>
      0428491c
  5. 22 Jun, 2017 1 commit
    • Paul Mackerras's avatar
      powerpc: Convert VDSO update function to use new update_vsyscall interface · d4cfb113
      Paul Mackerras authored 
      This converts the powerpc VDSO time update function to use the new
interface introduced in commit 576094b7 ("time: Introduce new
GENERIC_TIME_VSYSCALL", 2012-09-11).  Where the old interface gave
us the time as of the last update in seconds and whole nanoseconds,
with the new interface we get the nanoseconds part effectively in
a binary fixed-point format with tk->tkr_mono.shift bits to the
right of the binary point.

With the old interface, the fractional nanoseconds got truncated,
meaning that the value returned by the VDSO clock_gettime function
would have about 1ns of jitter in it compared to the value computed
by the generic timekeeping code in the kernel.

The powerpc VDSO time functions (clock_gettime and gettimeofday)
already work in units of 2^-32 seconds, or 0.23283 ns, because that
makes it simple to split the result into seconds and fractional
seconds, and represent the fractional seconds in either microseconds
or nanoseconds.  This is good enough accuracy for now, so this patch
avoids changing how the VDSO works or the interface in the VDSO data
page.

This patch converts the powerpc update_vsyscall_old to be called
update_vsyscall and use the new interface.  We convert the fractional
second to units of 2^-32 seconds without truncating to whole nanoseconds.
(There is still a conversion to whole nanoseconds for any legacy users
of the vdso_data/systemcfg stamp_xtime field.)

In addition, this improves the accuracy of the computation of tb_to_xs
for those systems with high-frequency timebase clocks (>= 268.5 MHz)
by doing the right shift in two parts, one before the multiplication and
one after, rather than doing the right shift before the multiplication.
(We can't do all of the right shift after the multiplication unless we
use 128-bit arithmetic.)
Signed-off-by: default avatarPaul Mackerras <paulus@ozlabs.org>
Acked-by: default avatarJohn Stultz <john.stultz@linaro.org>
Signed-off-by: default avatarMichael Ellerman <mpe@ellerman.id.au>
      d4cfb113
  7. 21 Jun, 2017 4 commits
  9. 20 Jun, 2017 9 commits
  11. 19 Jun, 2017 9 commits
  13. 15 Jun, 2017 9 commits
    • Murilo Opsfelder Araujo's avatar
      drivers/watchdog/Kconfig: Update CONFIG_WATCHDOG_RTAS dependencies · 42bed042
      Murilo Opsfelder Araujo authored 
      drivers/watchdog/wdrtas.c uses symbols defined in arch/powerpc/kernel/rtas.c,
which are exported iff CONFIG_PPC_RTAS is selected. Building wdrtas.c without
setting CONFIG_PPC_RTAS throws the following errors:

    ERROR: ".rtas_token" [drivers/watchdog/wdrtas.ko] undefined!
    ERROR: "rtas_data_buf" [drivers/watchdog/wdrtas.ko] undefined!
    ERROR: "rtas_data_buf_lock" [drivers/watchdog/wdrtas.ko] undefined!
    ERROR: ".rtas_get_sensor" [drivers/watchdog/wdrtas.ko] undefined!
    ERROR: ".rtas_call" [drivers/watchdog/wdrtas.ko] undefined!

This was identified during a randconfig build where CONFIG_WATCHDOG_RTAS=m and
CONFIG_PPC_RTAS was not set. Logs are here:

    http://kisskb.ellerman.id.au/kisskb/buildresult/12982152/

This patch fixes the issue by updating CONFIG_WATCHDOG_RTAS to depend on just
CONFIG_PPC_RTAS, removing COMPILE_TEST entirely.
Signed-off-by: default avatarMurilo Opsfelder Araujo <mopsfelder@gmail.com>
Reviewed-by: default avatarGuenter Roeck <linux@roeck-us.net>
Signed-off-by: default avatarMichael Ellerman <mpe@ellerman.id.au>
      42bed042
    • Nicholas Piggin's avatar
      powerpc/64s: Avoid cpabort in context switch when possible · 07d2a628
      Nicholas Piggin authored 
      The ISA v3.0B copy-paste facility only requires cpabort when switching
to a process that has foreign real addresses mapped (direct access to
accelerators), to clear a potential copy buffer filled by a previous
thread. There is no accelerator driver implemented yet, so cpabort can
be removed. It can be be re-added when a driver is implemented.

POWER9 DD1 requires the copy buffer to always be cleared on context
switch, but if accelerators are not in use, then an unpaired copy from
a dummy region is sufficient to clear data out of the copy buffer.

This increases context switch performance by about 5% on POWER9.
Signed-off-by: default avatarNicholas Piggin <npiggin@gmail.com>
Signed-off-by: default avatarMichael Ellerman <mpe@ellerman.id.au>
      07d2a628
    • Nicholas Piggin's avatar
      powerpc/64: Drop explicit hwsync in context switch · 9145effd
      Nicholas Piggin authored 
      The sync (aka. hwsync, aka. heavyweight sync) in the context switch
code to prevent MMIO access being reordered from the point of view of
a single process if it gets migrated to a different CPU is not
required because there is an hwsync performed earlier in the context
switch path.

Comment this so it's clear enough if anything changes on the scheduler
or the powerpc sides. Remove the hwsync from _switch.

This improves context switch performance by 2-3% on POWER8.
Signed-off-by: default avatarNicholas Piggin <npiggin@gmail.com>
Acked-by: default avatarPeter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: default avatarMichael Ellerman <mpe@ellerman.id.au>
      9145effd
    • Nicholas Piggin's avatar
      powerpc/64: Drop reservation-clearing ldarx in context switch · 837e72f7
      Nicholas Piggin authored 
      There is no need to explicitly break the reservation in _switch,
because we are guaranteed that the context switch path will include a
larx/stcx.

Comment the guarantee and remove the reservation clear from _switch.

This is worth 1-2% in context switch performance.
Signed-off-by: default avatarNicholas Piggin <npiggin@gmail.com>
Signed-off-by: default avatarMichael Ellerman <mpe@ellerman.id.au>
      837e72f7
    • Nicholas Piggin's avatar
      powerpc/64s: Leave interrupts hard enabled in context switch for radix · e4c0fc5f
      Nicholas Piggin authored 
      Commit 4387e9ff25 ("[POWERPC] Fix PMU + soft interrupt disable bug")
hard disabled interrupts over the low level context switch, because
the SLB management can't cope with a PMU interrupt accesing the stack
in that window.

Radix based kernel mapping does not use the SLB so it does not require
interrupts hard disabled here.

This is worth 1-2% in context switch performance on POWER9.
Signed-off-by: default avatarNicholas Piggin <npiggin@gmail.com>
Signed-off-by: default avatarMichael Ellerman <mpe@ellerman.id.au>
      e4c0fc5f
    • Nicholas Piggin's avatar
      powerpc/64: Avoid restore_math call if possible in syscall exit · bc4f65e4
      Nicholas Piggin authored 
      The syscall exit code that branches to restore_math is quite heavy on
Book3S, consisting of 2 mtmsr instructions. Threads that don't use both
FP and vector can get caught here if the kernel ever uses FP or vector.
Lazy-FP/vec context switching also trips this case.

So check for lazy FP and vector before switching RI for restore_math.
Move most of this case out of line.

For threads that do want to restore math registers, the MSR switches are
still suboptimal. Future direction may be to use a soft-RI bit to avoid
MSR switches in kernel (similar to soft-EE), but for now at least the
no-restore

POWER9 context switch rate increases by about 5% due to sched_yield(2)
return performance. I haven't constructed a test to measure the syscall
cost.
Signed-off-by: default avatarNicholas Piggin <npiggin@gmail.com>
Signed-off-by: default avatarMichael Ellerman <mpe@ellerman.id.au>
      bc4f65e4
    • Nicholas Piggin's avatar
      powerpc/64s: Optimize hypercall/syscall entry · acd7d8ce
      Nicholas Piggin authored 
      After bc355125 ("powerpc/64: Allow for relocation-on interrupts from
guest to host"), a getppid() system call goes from 307 cycles to 358
cycles (+17%) on POWER8. This is due significantly to the scratch SPR
used by the hypercall check.

It turns out there are a some volatile registers common to both system
call and hypercall (in particular, r12, cr0, ctr), which can be used to
avoid the SPR and some other overheads. This brings getppid to 320 cycles
(+4%).

Testing hcall entry performance by running "sc 1" in guest userspace
before this patch is 854 cycles, afterwards is 826. Also a small win
there.

POWER9 syscall is improved by about the same amount, hcall not tested.
Signed-off-by: default avatarNicholas Piggin <npiggin@gmail.com>
Signed-off-by: default avatarMichael Ellerman <mpe@ellerman.id.au>
      acd7d8ce
    • Michael Ellerman's avatar
      powerpc/mm/radix: Only add X for pages overlapping kernel text · 9abcc981
      Michael Ellerman authored 
      Currently we map the whole linear mapping with PAGE_KERNEL_X. Instead we
should check if the page overlaps the kernel text and only then add
PAGE_KERNEL_X.

Note that we still use 1G pages if they're available, so this will
typically still result in a 1G executable page at KERNELBASE. So this fix is
primarily useful for catching stray branches to high linear mapping addresses.

Without this patch, we can execute at 1G in xmon using:

  0:mon> m c000000040000000
  c000000040000000  00 l
  c000000040000000  00000000 01006038
  c000000040000004  00000000 2000804e
  c000000040000008  00000000 x
  0:mon> di c000000040000000
  c000000040000000  38600001      li      r3,1
  c000000040000004  4e800020      blr
  0:mon> p c000000040000000
  return value is 0x1

After we get a 400 as expected:

  0:mon> p c000000040000000
  *** 400 exception occurred

Fixes: 2bfd65e4 ("powerpc/mm/radix: Add radix callbacks for early init routines")
Cc: stable@vger.kernel.org # v4.7+
Signed-off-by: default avatarMichael Ellerman <mpe@ellerman.id.au>
Reviewed-by: default avatarAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Acked-by: default avatarBalbir Singh <bsingharora@gmail.com>
      9abcc981
    • Michael Ellerman's avatar
      Revert "powerpc: Handle simultaneous interrupts at once" · 0edc2ca9
      Michael Ellerman authored 
      This reverts commit 45cb08f4.

For some reason this is causing IRQ problems on Freescale Book3E
machines, eg on my p5020ds:

  irq 25: nobody cared (try booting with the "irqpoll" option)
  CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.12.0-rc3-gcc-6.3.1-00037-g45cb08f4 #624
  Call Trace:
  [c0000000fffdbb10] [c00000000049962c] .dump_stack+0xa8/0xe8 (unreliable)
  [c0000000fffdbba0] [c0000000000babf4] .__report_bad_irq+0x54/0x140
  [c0000000fffdbc40] [c0000000000bb11c] .note_interrupt+0x324/0x380
  [c0000000fffdbd00] [c0000000000b7110] .handle_irq_event_percpu+0x68/0x88
  [c0000000fffdbd90] [c0000000000b718c] .handle_irq_event+0x5c/0xa8
  [c0000000fffdbe10] [c0000000000bc01c] .handle_fasteoi_irq+0xe4/0x298
  [c0000000fffdbe90] [c0000000000b59c4] .generic_handle_irq+0x50/0x74
  [c0000000fffdbf10] [c0000000000075d8] .__do_irq+0x74/0x1f0
  [c0000000fffdbf90] [c0000000000189f8] .call_do_irq+0x14/0x24
  [c0000000f7173060] [c0000000000077e4] .do_IRQ+0x90/0x120
  [c0000000f7173100] [c00000000001d93c] exc_0x500_common+0xfc/0x100
  --- interrupt: 501 at .prepare_to_wait_event+0xc/0x14c
      LR = .fsl_elbc_run_command+0xc8/0x23c
  [c0000000f71734d0] [c00000000065f418] .nand_reset+0xb8/0x168
  [c0000000f7173560] [c00000000065fec4] .nand_scan_ident+0x2b0/0x1638
  [c0000000f7173650] [c000000000666cd8] .fsl_elbc_nand_probe+0x34c/0x5f0
  ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
  [c0000000f7173750] [c0000000005a3c60] .platform_drv_probe+0x64/0xb0
  [c0000000f71737d0] [c0000000005a12e0] .really_probe+0x290/0x334
  [c0000000f7173870] [c0000000005a14a0] .__driver_attach+0x11c/0x120
  [c0000000f7173900] [c00000000059e6a0] .bus_for_each_dev+0x98/0xfc
  [c0000000f71739a0] [c0000000005a0b3c] .driver_attach+0x34/0x4c
  [c0000000f7173a20] [c0000000005a04b0] .bus_add_driver+0x1ac/0x2e0
  [c0000000f7173ac0] [c0000000005a2170] .driver_register+0x94/0x160
  [c0000000f7173b40] [c0000000005a3be0] .__platform_driver_register+0x60/0x7c
  [c0000000f7173bc0] [c000000000d6aab4] .fsl_elbc_nand_driver_init+0x24/0x38
  [c0000000f7173c30] [c000000000001934] .do_one_initcall+0x68/0x1b8
  [c0000000f7173d00] [c000000000d210f8] .kernel_init_freeable+0x260/0x338
  [c0000000f7173db0] [c0000000000021b0] .kernel_init+0x20/0xe70
  [c0000000f7173e30] [c0000000000009bc] .ret_from_kernel_thread+0x58/0x9c
  handlers:
  [<c000000000ed85c8>] .fsl_lbc_ctrl_irq
  Disabling IRQ #25

Ben also had concerns with the implementation being potentially slow on
some PICs, so revert it for now.
Signed-off-by: default avatarMichael Ellerman <mpe@ellerman.id.au>
      0edc2ca9
  15. 06 Jun, 2017 1 commit
    • Nicholas Piggin's avatar
      powerpc/64s: Machine check handle ifetch from foreign real address for POWER9 · 90df4bfb
      Nicholas Piggin authored 
      The i-side 0111b machine check, which is "Instruction Fetch to foreign
address space", was missed by 7b9f71f9 ("powerpc/64s: POWER9 machine
check handler").

    The POWER9 processor core considers host real addresses with a
    nonzero value in RA(8:12) as foreign address space, accessible only
    by the copy and paste instructions. The copy and paste instruction
    pair can be used to invoke the Nest accelerators via the Virtual
    Accelerator Switchboard (VAS).

It is an error for any regular load/store or ifetch to go to a foreign
addresses. When relocation is on, this causes an MMU exception. When
relocation is off, a machine check exception. It is possible to trigger
this machine check by branching to a foreign address with MSR[IR]=0.

Fixes: 7b9f71f9 ("powerpc/64s: POWER9 machine check handler")
Reported-by: default avatarMahesh Salgaonkar <mahesh@linux.vnet.ibm.com>
Signed-off-by: default avatarNicholas Piggin <npiggin@gmail.com>
Signed-off-by: default avatarMichael Ellerman <mpe@ellerman.id.au>
      90df4bfb
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7