- 26 Aug, 2010 6 commits
-
-
Cliff Cai authored
commit ac770267 upstream. Signed-off-by:
Cliff Cai <cliff.cai@analog.com> Signed-off-by:
Mike Frysinger <vapier@gentoo.org> Acked-by:
Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by:
Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@suse.de>
-
Mark Brown authored
commit b2c1e07b upstream. This is not supported by current hardware revisions. Signed-off-by:
-
Mark Brown authored
commit 4f0ed9a5 upstream. Signed-off-by:
-
Thomas Gleixner authored
commit 0a7992c9 upstream. The ACPI_PREEMPTION_POINT() logic was introduced in commit 8bd108d1 (ACPICA: add preemption point after each opcode parse). The follow up commits abe1dfab, 138d1569, c084ca70 tried to fix the preemption logic back and forth, but nobody noticed that the usage of in_atomic_preempt_off() in that context is wrong. The check which guards the call of cond_resched() is: if (!in_atomic_preempt_off() && !irqs_disabled()) in_atomic_preempt_off() is not intended for general use as the comment above the macro definition clearly says: * Check whether we were atomic before we did preempt_disable(): * (used by the scheduler, *after* releasing the kernel lock) On a CONFIG_PREEMPT=n kernel the usage of in_atomic_preempt_off() works by accident, but with CONFIG_PREEMPT=y it's just broken. The whole purpose of the ACPI_PREEMPTION_POINT() is to reduce the latency on a CONFIG_PREEMPT=n kernel, so make ACPI_PREEMPTION_POINT() depend on CONFIG_PREEMPT=n and remove the in_atomic_preempt_off() check. Addresses https://bugzilla.kernel.org/show_bug.cgi?id=16210 [akpm@linux-foundation.org: fix build] Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Cc: Len Brown <lenb@kernel.org> Cc: Francois Valenduc <francois.valenduc@tvcablenet.be> Cc: Lin Ming <ming.m.lin@intel.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Maxim Levitsky authored
commit d862b13b upstream. mspro_block_remove() is called from detect thread that first calls the mspro_block_stop(), which stops the request queue. If we call del_gendisk() with the queue stopped we get a deadlock. Signed-off-by:
Maxim Levitsky <maximlevitsky@gmail.com> Cc: Alex Dubov <oakad@yahoo.com> Signed-off-by:
-
Maxim Levitsky authored
commit 21fd0495 upstream. Otherwise lockdep complains. Signed-off-by:
-
- 20 Aug, 2010 4 commits
-
-
Greg Kroah-Hartman authored
-
Greg Kroah-Hartman authored
This fixes a build error reported in vmware.c due to commit 9f242dc1Reported-by:
Sven Joachim <svenjoac@gmx.de> Cc: Alok Kataria <akataria@vmware.com> Signed-off-by:
-
Linus Torvalds authored
commit d7824370 upstream. This commit makes the stack guard page somewhat less visible to user space. It does this by: - not showing the guard page in /proc/<pid>/maps It looks like lvm-tools will actually read /proc/self/maps to figure out where all its mappings are, and effectively do a specialized "mlockall()" in user space. By not showing the guard page as part of the mapping (by just adding PAGE_SIZE to the start for grows-up pages), lvm-tools ends up not being aware of it. - by also teaching the _real_ mlock() functionality not to try to lock the guard page. That would just expand the mapping down to create a new guard page, so there really is no point in trying to lock it in place. It would perhaps be nice to show the guard page specially in /proc/<pid>/maps (or at least mark grow-down segments some way), but let's not open ourselves up to more breakage by user space from programs that depends on the exact deails of the 'maps' file. Special thanks to Henrique de Moraes Holschuh for diving into lvm-tools source code to see what was going on with the whole new warning. Reported-and-tested-by: François Valenduc <francois.valenduc@tvcablenet.be Reported-by:
Henrique de Moraes Holschuh <hmh@hmh.eng.br> Signed-off-by:
-
Linus Torvalds authored
commit 11ac5524 upstream. We do in fact need to unmap the page table _before_ doing the whole stack guard page logic, because if it is needed (mainly 32-bit x86 with PAE and CONFIG_HIGHPTE, but other architectures may use it too) then it will do a kmap_atomic/kunmap_atomic. And those kmaps will create an atomic region that we cannot do allocations in. However, the whole stack expand code will need to do anon_vma_prepare() and vma_lock_anon_vma() and they cannot do that in an atomic region. Now, a better model might actually be to do the anon_vma_prepare() when _creating_ a VM_GROWSDOWN segment, and not have to worry about any of this at page fault time. But in the meantime, this is the straightforward fix for the issue. See https://bugzilla.kernel.org/show_bug.cgi?id=16588 for details. Reported-by:
Wylda <wylda@volny.cz> Reported-by:
Sedat Dilek <sedat.dilek@gmail.com> Reported-by:
Mike Pagano <mpagano@gentoo.org> Reported-by:
François Valenduc <francois.valenduc@tvcablenet.be> Tested-by:
Ed Tomlinson <edt@aei.ca> Cc: Pekka Enberg <penberg@kernel.org> Signed-off-by:
-
- 13 Aug, 2010 30 commits
-
-
Greg Kroah-Hartman authored
-
Linus Torvalds authored
commit 96054569 upstream. It's wrong for several reasons, but the most direct one is that the fault may be for the stack accesses to set up a previous SIGBUS. When we have a kernel exception, the kernel exception handler does all the fixups, not some user-level signal handler. Even apart from the nested SIGBUS issue, it's also wrong to give out kernel fault addresses in the signal handler info block, or to send a SIGBUS when a system call already returns EFAULT. Signed-off-by:
-
Linus Torvalds authored
commit 5528f913 upstream. .. which didn't show up in my tests because it's a no-op on x86-64 and most other architectures. But we enter the function with the last-level page table mapped, and should unmap it at exit. Signed-off-by:
-
Linus Torvalds authored
commit 320b2b8d upstream. This is a rather minimally invasive patch to solve the problem of the user stack growing into a memory mapped area below it. Whenever we fill the first page of the stack segment, expand the segment down by one page. Now, admittedly some odd application might _want_ the stack to grow down into the preceding memory mapping, and so we may at some point need to make this a process tunable (some people might also want to have more than a single page of guarding), but let's try the minimal approach first. Tested with trivial application that maps a single page just below the stack, and then starts recursing. Without this, we will get a SIGSEGV _after_ the stack has smashed the mapping. With this patch, we'll get a nice SIGBUS just as the stack touches the page just above the mapping. Requested-by:
Keith Packard <keithp@keithp.com> Signed-off-by:
-
Eric Sandeen authored
commit 437f88cc upstream. Commit 6b0310fb caused a regression resulting in deadlocks when freezing a filesystem which had active IO; the vfs_check_frozen level (SB_FREEZE_WRITE) did not let the freeze-related IO syncing through. Duh. Changing the test to FREEZE_TRANS should let the normal freeze syncing get through the fs, but still block any transactions from starting once the fs is completely frozen. I tested this by running fsstress in the background while periodically snapshotting the fs and running fsck on the result. I ran into occasional deadlocks, but different ones. I think this is a fine fix for the problem at hand, and the other deadlocky things will need more investigation. Reported-by:
Phillip Susi <psusi@cfl.rr.com> Signed-off-by:
Eric Sandeen <sandeen@redhat.com> Signed-off-by:
"Theodore Ts'o" <tytso@mit.edu> Signed-off-by:
-
Alexander Shishkin authored
commit 0b767f96 upstream. By default, CONFIG_CRYPTO_MANAGER_TESTS will be enabled and thus self-tests will still run, but it is now possible to disable them to gain some time during bootup. Signed-off-by:
Alexander Shishkin <virtuoso@slind.org> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
Ian Campbell authored
commit 4877c737 upstream. In general the semantics of IPIs are that they are are expected to continue functioning after dpm_suspend_noirq(). Specifically I have seen a deadlock between the callfunc IPI and the stop machine used by xen's do_suspend() routine. If one CPU has already called dpm_suspend_noirq() then there is a window where it can be sent a callfunc IPI before all the other CPUs have entered stop_cpu(). If this happens then the first CPU ends up spinning in stop_cpu() waiting for the other to rendezvous in state STOPMACHINE_PREPARE while the other is spinning in csd_lock_wait(). Signed-off-by:
Ian Campbell <ian.campbell@citrix.com> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Cc: xen-devel@lists.xensource.com LKML-Reference: <1280398595-29708-4-git-send-email-ian.campbell@citrix.com> Signed-off-by:
-
Ian Campbell authored
commit 685fd0b4 upstream. A small number of users of IRQF_TIMER are using it for the implied no suspend behaviour on interrupts which are not timer interrupts. Therefore add a new IRQF_NO_SUSPEND flag, rename IRQF_TIMER to __IRQF_TIMER and redefine IRQF_TIMER in terms of these new flags. Signed-off-by:
-
David S. Miller authored
commit 38117d14 upstream. Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Dave Kleikamp authored
commit aca0fa34 upstream. It's currently possible to bypass xattr namespace access rules by prefixing valid xattr names with "os2.", since the os2 namespace stores extended attributes in a legacy format with no prefix. This patch adds checking to deny access to any valid namespace prefix following "os2.". Signed-off-by:
Dave Kleikamp <shaggy@linux.vnet.ibm.com> Reported-by:
Sergey Vlasov <vsu@altlinux.ru> Signed-off-by:
-
James Chapman authored
commit 4565956d upstream. The header file l2tp.h should be exported to the installed include/linux/ tree for userspace programs. This patch fixes compilation errors in L2TP userspace apps which want to use the new L2TP support introduced in 2.6.35. Signed-off-by:
James Chapman <jchapman@katalix.com> Signed-off-by:
-
Marek Vasut authored
commit 81cbb0b1 upstream. This patch corrects a problem where gen_nand driver assumed there can be only one chip and ignored the pdata->chip.nr_chips value. Signed-off-by:
Marek Vasut <marek.vasut@gmail.com> Signed-off-by:
Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by:
David Woodhouse <David.Woodhouse@intel.com> Signed-off-by:
-
Eric Bénard authored
commit 6a8cfcfb upstream. * preset should be done before sending the reset command * without this, I get the following error on an i.MX35 : [ 0.900000] ------------[ cut here ]------------ [ 0.900000] WARNING: at kernel/irq/manage.c:290 __enable_irq+0x4c/0x88() [ 0.900000] Unbalanced enable for IRQ 33 [ 0.900000] Modules linked in: [ 0.900000] [<c002ffb8>] (unwind_backtrace+0x0/0xf0) from [<c02f7d0c>] (dump_stack+0x18/0x1c) [ 0.900000] [<c02f7d0c>] (dump_stack+0x18/0x1c) from [<c0049a44>] (warn_slowpath_common+0x54/0x6c) [ 0.900000] [<c0049a44>] (warn_slowpath_common+0x54/0x6c) from [<c0049b00>] (warn_slowpath_fmt+0x38/0x40) [ 0.900000] [<c0049b00>] (warn_slowpath_fmt+0x38/0x40) from [<c008f65c>] (__enable_irq+0x4c/0x88) [ 0.900000] [<c008f65c>] (__enable_irq+0x4c/0x88) from [<c008fca0>] (enable_irq+0x54/0x98) [ 0.900000] [<c008fca0>] (enable_irq+0x54/0x98) from [<c021e618>] (wait_op_done+0x40/0x134) [ 0.900000] [<c021e618>] (wait_op_done+0x40/0x134) from [<c021e808>] (send_cmd+0x30/0x38) [ 0.900000] [<c021e808>] (send_cmd+0x30/0x38) from [<c021eb8c>] (mxc_nand_command+0x26c/0x328) [ 0.900000] [<c021eb8c>] (mxc_nand_command+0x26c/0x328) from [<c021aa60>] (nand_scan_ident+0x188/0x6c0) [ 0.900000] [<c021aa60>] (nand_scan_ident+0x188/0x6c0) from [<c001a9cc>] (mxcnd_probe+0x2b8/0x3d0) [ 0.900000] [<c001a9cc>] (mxcnd_probe+0x2b8/0x3d0) from [<c01f9e88>] (platform_drv_probe+0x20/0x24) [ 0.900000] [<c01f9e88>] (platform_drv_probe+0x20/0x24) from [<c01f8c38>] (driver_probe_device+0xb0/0x164) [ 0.900000] [<c01f8c38>] (driver_probe_device+0xb0/0x164) from [<c01f8d54>] (__driver_attach+0x68/0x8c) [ 0.900000] [<c01f8d54>] (__driver_attach+0x68/0x8c) from [<c01f8348>] (bus_for_each_dev+0x50/0x84) [ 0.900000] [<c01f8348>] (bus_for_each_dev+0x50/0x84) from [<c01f8a9c>] (driver_attach+0x20/0x28) [ 0.900000] [<c01f8a9c>] (driver_attach+0x20/0x28) from [<c01f7c00>] (bus_add_driver+0x144/0x2dc) [ 0.900000] [<c01f7c00>] (bus_add_driver+0x144/0x2dc) from [<c01f906c>] (driver_register+0xb0/0x13c) [ 0.900000] [<c01f906c>] (driver_register+0xb0/0x13c) from [<c01fa13c>] (platform_driver_register+0x4c/0x60) [ 0.900000] [<c01fa13c>] (platform_driver_register+0x4c/0x60) from [<c01fa170>] (platform_driver_probe+0x20/0xa0) [ 0.900000] [<c01fa170>] (platform_driver_probe+0x20/0xa0) from [<c001a708>] (mxc_nd_init+0x18/0x24) [ 0.900000] [<c001a708>] (mxc_nd_init+0x18/0x24) from [<c002938c>] (do_one_initcall+0x64/0x1bc) [ 0.900000] [<c002938c>] (do_one_initcall+0x64/0x1bc) from [<c00084c4>] (kernel_init+0xe8/0x1ac) [ 0.900000] [<c00084c4>] (kernel_init+0xe8/0x1ac) from [<c002aee8>] (kernel_thread_exit+0x0/0x8) [ 0.900000] ---[ end trace 8bf72ac6ba089a19 ]--- [ 1.140000] NAND device: Manufacturer ID: 0x2c, Chip ID: 0xda (Micron NAND 256MiB 3,3V 8-bit) Signed-off-by:
Eric Bénard <eric@eukrea.com> Signed-off-by:
-
Peter Zijlstra authored
commit 396e894d upstream. Norbert reported that nohz_ratelimit() causes his laptop to burn about 4W (40%) extra. For now back out the change and see if we can adjust the power management code to make better decisions. Reported-by:
Norbert Preining <preining@logic.at> Signed-off-by:
Peter Zijlstra <a.p.zijlstra@chello.nl> Acked-by:
Mike Galbraith <efault@gmx.de> Cc: Arjan van de Ven <arjan@infradead.org> LKML-Reference: <new-submission> Signed-off-by:
Ingo Molnar <mingo@elte.hu> Signed-off-by:
-
Cyril Lacoux authored
commit 0a79f674 upstream. Device class is ff(vend.) instead of e0(wlcon). Output from command `usb-devices`: T: Bus=01 Lev=03 Prnt=03 Port=00 Cnt=01 Dev#= 6 Spd=12 MxCh= 0 D: Ver= 2.00 Cls=ff(vend.) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=05ac ProdID=8215 Rev=01.82 S: Manufacturer=Apple Inc. S: Product=Bluetooth USB Host Controller S: SerialNumber=7C6D62936607 C: #Ifs= 4 Cfg#= 1 Atr=e0 MxPwr=0mA I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb I: If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb I: If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) I: If#= 3 Alt= 0 #EPs= 0 Cls=fe(app. ) Sub=01 Prot=00 Driver=(none) Signed-off-by:
Cyril Lacoux <clacoux@ifeelgood.org> Signed-off-by:
Marcel Holtmann <marcel@holtmann.org> Signed-off-by:
-
Johan Hovold authored
commit b58af406 upstream. As David VomLehn points out, it was possible to receive an interrupt before clearing the free-urb flag which could lead to the urb being incorrectly marked as busy. For the same reason, move tx_bytes accounting so that it will never be negative. Note that the free-flags set and clear operations do not need any additional locking as they are manipulated while USB_SERIAL_WRITE_BUSY is set. Reported-by:
David VomLehn <dvomlehn@cisco.com> Tested-by:
Johan Hovold <jhovold@gmail.com> Signed-off-by:
-
Christian Lamparter authored
commit b3e67044 upstream. This patch fixes a race condition in two utility routines related to the removal/unlinking of urbs from an anchor. If two threads are concurrently accessing the same anchor, both could end up with the same urb - thinking they are the exclusive owner. Alan Stern pointed out a related issue in usb_unlink_anchored_urbs: "The URB isn't removed from the anchor until it completes (as a by-product of completion, in fact), which might not be for quite some time after the unlink call returns. In the meantime, the subroutine will keep trying to unlink it, over and over again." Cc: Oliver Neukum <oneukum@suse.de> Cc: Greg Kroah-Hartman <greg@kroah.com> Acked-by:
Alan Stern <stern@rowland.harvard.edu> Signed-off-by:
Christian Lamparter <chunkeey@googlemail.com> Signed-off-by:
-
Ming Lei authored
commit e10e1bec upstream. This patch fixes the warning below: [30753.755998] ------------[ cut here ]------------ [30753.755998] WARNING: at /home/tom/git/linux-2.6/linux-2.6-next/arch/x86/include/asm/dma-mapping.h:155 hcd_buffer_free+0xb1/0xd4 [usbcore]() [30753.755998] Hardware name: 6475EK2 [30753.755998] Modules linked in: uvcvideo ehci_hcd usbtest cdc_ether usbnet vfat fat usb_storage nfsd lockd nfs_acl auth_rpcgss exportfs mii tun videodev v4l1_compat v4l2_compat_ioctl32 fuse bridge stp llc sunrpc ipv6 cpufreq_ondemand acpi_cpufreq freq_table mperf kvm_intel kvm arc4 ecb ath5k usbhid mac80211 snd_hda_codec_conexant ch341 usbserial ath cfg80211 thinkpad_acpi snd_hda_intel pcspkr wmi hwmon yenta_socket iTCO_wdt iTCO_vendor_support i2c_i801 e1000e snd_hda_codec snd_hwdep snd_pcm snd_timer snd soundcore snd_page_alloc pata_acpi uhci_hcd ohci_hcd usbcore i915 drm_kms_helper drm i2c_algo_bit i2c_core video output [last unloaded: uvcvideo] [30753.755998] Pid: 0, comm: swapper Tainted: G W 2.6.35-rc6-gkh-wl+ #49 [30753.755998] Call Trace: [30753.755998] <IRQ> [<ffffffff8104478a>] warn_slowpath_common+0x80/0x98 [30753.755998] [<ffffffff810447b7>] warn_slowpath_null+0x15/0x17 [30753.755998] [<ffffffffa00ce02d>] hcd_buffer_free+0xb1/0xd4 [usbcore] [30753.755998] [<ffffffffa00c1345>] usb_free_coherent+0x1c/0x1e [usbcore] [30753.755998] [<ffffffffa00b13e4>] simple_free_urb+0x23/0x2f [usbtest] [30753.755998] [<ffffffffa00b210b>] iso_callback+0xbb/0x10f [usbtest] [30753.755998] [<ffffffffa00c7390>] usb_hcd_giveback_urb+0x8c/0xc0 [usbcore] [30753.755998] [<ffffffffa0449b35>] ehci_urb_done+0x84/0x95 [ehci_hcd] [30753.755998] [<ffffffffa044b5a5>] ehci_work+0x41a/0x7dd [ehci_hcd] [30753.755998] [<ffffffffa044e298>] ehci_irq+0x33b/0x370 [ehci_hcd] [30753.755998] [<ffffffff8100fb05>] ? sched_clock+0x9/0xd [30753.755998] [<ffffffff8105e641>] ? sched_clock_local+0x1c/0x82 [30753.755998] [<ffffffff8105e76a>] ? sched_clock_cpu+0xc3/0xce [30753.755998] [<ffffffff81067c7e>] ? trace_hardirqs_off+0xd/0xf [30753.755998] [<ffffffff8105e7b8>] ? cpu_clock+0x43/0x5e [30753.755998] [<ffffffffa00c6999>] usb_hcd_irq+0x45/0xa1 [usbcore] [30753.755998] [<ffffffff81092e02>] handle_IRQ_event+0x20/0xa5 [30753.755998] [<ffffffff81094cea>] handle_fasteoi_irq+0x92/0xd2 [30753.755998] [<ffffffff8100c0ed>] handle_irq+0x1f/0x2a [30753.755998] [<ffffffff8100b75d>] do_IRQ+0x57/0xbe [30753.755998] [<ffffffff8136a693>] ret_from_intr+0x0/0x16 [30753.755998] <EOI> [<ffffffff81223baa>] ? acpi_idle_enter_bm+0x231/0x269 [30753.755998] [<ffffffff81223ba3>] ? acpi_idle_enter_bm+0x22a/0x269 [30753.755998] [<ffffffff812c4b6b>] cpuidle_idle_call+0x99/0xce [30753.755998] [<ffffffff81008dd5>] cpu_idle+0x61/0xaa [30753.755998] [<ffffffff8136374b>] start_secondary+0x1c2/0x1c6 [30753.755998] ---[ end trace 904cfaf7ab4cb1a2 ]--- Signed-off-by:
Ming Lei <tom.leiming@gmail.com> Signed-off-by:
-
Alessio Igor Bogani authored
commit 356c5a48 upstream. Signed-off-by:
Alessio Igor Bogani <abogani@texware.it> Signed-off-by:
-
dranch@trinnet.net authored
commit b6180ef7 upstream. This patch is to add a US Interface, Inc. "Navigator" USB device. Specifically, it's a HAM Radio USB sound modem that also incorporates three pairs of unique FTDI serial ports. The standard Linux FTDI serial driver will only recognize the first two serial ports of an unknown FDTI derived device and this patch adds in recognition to these specific new IDs. Signed-off-by:
David A. Ranch <dranch@trinnet.net> Signed-off-by:
-
Andrew Bird authored
commit 0372a754 upstream. This patch adds the product IDs of Huawei's K3765 and K4505 mobile broadband usb modems to option.c. It also adds a quirk to the option probe function so that binding to the device's network interface(class 0xff) is avoided. This is necessary to allow another driver to bind to that, and to avoid programs like wvdial opening a nonfunctioning tty during modem discovery. Signed-off-by:
Andrew Bird <ajb@spheresystems.co.uk> Signed-off-by:
-
Pavel Kazlou authored
commit b972302b upstream. The patch adds Huawei ETS 1220 product id into the list of supported devices in 'option' usb serial driver. Signed-off-by:
Pavel Kazlou <p.i.kazlou@gmail.com> Signed-off-by:
-
John G. Rogers authored
commit afad1964 upstream. I have added the ProductID=0xe729 VendorID=FTDI_VID=0x0403 which will enable support for the Segway Robotic Mobility Platform (RMP200) in the ftdi_sio kernel module. Currently, users of the Segway RMP200 must use a RUN+="/sbin/modprobe -q ftdi-sio product=0xe729 vendor=0x0403 in a udev rule to get the ftdi_sio module to handle the usb interface and mount it on /dev/ttyXXX. This is not a good solution because some users will have multiple USB to Serial converters which will use the ftdi_sio module. Signed-off-by:
John Rogers <jgrogers@gmail.com> Signed-off-by:
-
Phil Dibowitz authored
commit 93362a87 upstream. The Logitech Harmony 700 series needs an extra delay during initialization. This patch adds a USB quirk which enables such a delay and adds the device to the quirks list. Signed-off-by:
Phil Dibowitz <phil@ipom.com> Signed-off-by:
-
Steven Robertson authored
commit 33d973ad upstream. Enlarging the buffer size via the MON_IOCT_RING_SIZE ioctl causes general protection faults. It appears the culprit is an incorrect argument to mon_free_buff: instead of passing the size of the current buffer being freed, the size of the new buffer is passed. Use the correct size argument to mon_free_buff when changing the size of the buffer. Signed-off-by:
Steven Robertson <steven@strobe.cc> Acked-by:
Pete Zaitcev <zaitcev@redhat.com> Signed-off-by:
-
Alan Stern authored
commit ae68a83b upstream. This patch (as1405) fixes a small bug in ehci-hcd's isochronous scheduler. Not all EHCI controllers are PCI, and the code shouldn't assume that they are. Instead, introduce a special flag for controllers which need to delay iso scheduling for full-speed devices beyond the scheduling threshold. Signed-off-by:
Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by:
-
Anand Gadiyar authored
commit 0936fb5e upstream. DMA_ADDR and DMA_COUNT are 32-bit registers, not 16-bit. Marking them as 16-bit in the table causes only the lower 16-bits to be dumped and this is misleading. Signed-off-by:
Anand Gadiyar <gadiyar@ti.com> Acked-by:
Felipe Balbi <felipe.balbi@nokia.com> Signed-off-by:
Ajay Kumar Gupta <ajay.gupta@ti.com> Signed-off-by:
-
Uwe Kleine-König authored
commit 868003ca upstream. This is a follow up to 14cb0deb (arm/imx/gpio: add spinlock protection) and fixes the following build failure: CC arch/arm/mach-imx/pcm970-baseboard.o In file included from arch/arm/include/asm/gpio.h:6, from include/linux/gpio.h:8, from arch/arm/mach-imx/pcm970-baseboard.c:20: arch/arm/plat-mxc/include/mach/gpio.h:40: error: expected specifier-qualifier-list before 'spinlock_t' Signed-off-by:
Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by:
Russell King <rmk+kernel@arm.linux.org.uk>
-
Will Deacon authored
commit cdf357f1 upstream. On versions of the Cortex-A9 prior to r2p0, performing TLB invalidations by ASID match can result in the incorrect ASID being broadcast to other CPUs. As a consequence of this, the targetted TLB entries are not invalidated across the system. This workaround changes the TLB flushing routines to invalidate entries regardless of the ASID. Tested-by:
Rob Clark <rob@ti.com> Acked-by:
Catalin Marinas <catalin.marinas@arm.com> Signed-off-by:
Will Deacon <will.deacon@arm.com> Signed-off-by:
-
Catalin Marinas authored
commit 492c5d94 upstream. On SMP systems, the SMSC911x registers may be accessed by multiple CPUs and this seems to put the chip in an inconsistent state. The patch adds spinlocks to the smsc911x_reg_read, smsc911x_reg_write, smsc911x_rx_readfifo and smsc911x_tx_writefifo functions. Signed-off-by:
-
