Commit 2f272463 ("KVM: PPC: Book3S HV: Cope with host using large
decrementer mode", 2017-05-22) added code to treat the hypervisor
decrementer (HDEC) as a 64-bit value on POWER9 rather than 32-bit.
Unfortunately, that commit missed one place where HDEC is treated
as a 32-bit value.  This fixes it.

This bug should not have any user-visible consequences that I can
think of, beyond an occasional unnecessary exit to the host kernel.
If the hypervisor decrementer has gone negative, then the bottom
32 bits will be negative for about 4 seconds after that, so as
long as we get out of the guest within those 4 seconds we won't
conclude that the HDEC interrupt is spurious.
Reported-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com>
Fixes: 2f272463 ("KVM: PPC: Book3S HV: Cope with host using large decrementer mode")
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>

binutils >= 2.26 now warns about misuse of register expressions in
assembler operands that are actually literals. In this instance r0 is
being used where a literal 0 should be used.
Signed-off-by: Andreas Schwab <schwab@linux-m68k.org>
[mpe: Split into separate KVM patch, tweak change log]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>

KVM currently validates the size of the VPA registered by the client
against sizeof(struct lppaca), however we align (and therefore size)
that struct to 1kB to avoid crossing a 4kB boundary in the client.

PAPR calls for sizes >= 640 bytes to be accepted. Hard code this with
a comment.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>

In handling a H_ENTER hypercall, the code in kvmppc_do_h_enter
clobbers the high-order two bits of the storage key, which is stored
in a split field in the second doubleword of the HPTE.  Any storage
key number above 7 hence fails to operate correctly.

This makes sure we preserve all the bits of the storage key.
Acked-by: Balbir Singh <bsingharora@gmail.com>
Signed-off-by: Ram Pai <linuxram@us.ibm.com>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>

We should set "err = -ENOMEM;", otherwise it means we're returning
ERR_PTR(0) which is NULL.  It results in a NULL pointer dereference in
the caller.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>

There are some error paths in kvmppc_core_vcpu_create_e500() where we
forget to set the error code.  It means that we return ERR_PTR(0) which
is NULL and it results in a NULL pointer dereference in the caller.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>

According to the SDM, if the "use TPR shadow" VM-execution control is
1, bits 11:0 of the virtual-APIC address must be 0 and the address
should set any bits beyond the processor's physical-address width.
Signed-off-by: Jim Mattson <jmattson@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

------------[ cut here ]------------
WARNING: CPU: 7 PID: 3861 at /home/kernel/ssd/kvm/arch/x86/kvm//vmx.c:11299 nested_vmx_vmexit+0x176e/0x1980 [kvm_intel]
CPU: 7 PID: 3861 Comm: qemu-system-x86 Tainted: G        W  OE   4.13.0-rc4+ #11
RIP: 0010:nested_vmx_vmexit+0x176e/0x1980 [kvm_intel]
Call Trace:
 ? kvm_multiple_exception+0x149/0x170 [kvm]
 ? handle_emulation_failure+0x79/0x230 [kvm]
 ? load_vmcs12_host_state+0xa80/0xa80 [kvm_intel]
 ? check_chain_key+0x137/0x1e0
 ? reexecute_instruction.part.168+0x130/0x130 [kvm]
 nested_vmx_inject_exception_vmexit+0xb7/0x100 [kvm_intel]
 ? nested_vmx_inject_exception_vmexit+0xb7/0x100 [kvm_intel]
 vmx_queue_exception+0x197/0x300 [kvm_intel]
 kvm_arch_vcpu_ioctl_run+0x1b0c/0x2c90 [kvm]
 ? kvm_arch_vcpu_runnable+0x220/0x220 [kvm]
 ? preempt_count_sub+0x18/0xc0
 ? restart_apic_timer+0x17d/0x300 [kvm]
 ? kvm_lapic_restart_hv_timer+0x37/0x50 [kvm]
 ? kvm_arch_vcpu_load+0x1d8/0x350 [kvm]
 kvm_vcpu_ioctl+0x4e4/0x910 [kvm]
 ? kvm_vcpu_ioctl+0x4e4/0x910 [kvm]
 ? kvm_dev_ioctl+0xbe0/0xbe0 [kvm]

The flag "nested_run_pending", which can override the decision of which should run
next, L1 or L2. nested_run_pending=1 means that we *must* run L2 next, not L1. This
is necessary in particular when L1 did a VMLAUNCH of L2 and therefore expects L2 to
be run (and perhaps be injected with an event it specified, etc.). Nested_run_pending
is especially intended to avoid switching  to L1 in the injection decision-point.

This can be handled just like the other cases in vmx_check_nested_events, instead of
having a special case in vmx_queue_exception.

Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Wanpeng Li <wanpeng.li@hotmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

vmx_complete_interrupts() assumes that the exception is always injected,
so it can be dropped by kvm_clear_exception_queue().  However,
an exception cannot be injected immediately if it is: 1) originally
destined to a nested guest; 2) trapped to cause a vmexit; 3) happening
right after VMLAUNCH/VMRESUME, i.e. when nested_run_pending is true.

This patch applies to exceptions the same algorithm that is used for
NMIs, replacing exception.reinject with "exception.injected" (equivalent
to nmi_injected).

exception.pending now represents an exception that is queued and whose
side effects (e.g., update RFLAGS.RF or DR7) have not been applied yet.
If exception.pending is true, the exception might result in a nested
vmexit instead, too (in which case the side effects must not be applied).

exception.injected instead represents an exception that is going to be
injected into the guest at the next vmentry.
Reported-by: Radim Krčmář <rkrcmar@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Wanpeng Li <wanpeng.li@hotmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Use kvm_event_needs_reinjection() encapsulation.

Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Wanpeng Li <wanpeng.li@hotmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

update_permission_bitmask currently does a 128-iteration loop to,
essentially, compute a constant array.  Computing the 8 bits in parallel
reduces it to 16 iterations, and is enough to speed it up substantially
because many boolean operations in the inner loop become constants or
simplify noticeably.

Because update_permission_bitmask is actually the top item in the profile
for nested vmexits, this speeds up an L2->L1 vmexit by about ten thousand
clock cycles, or up to 30%:

                                         before     after
   cpuid                                 35173      25954
   vmcall                                35122      27079
   inl_from_pmtimer                      52635      42675
   inl_from_qemu                         53604      44599
   inl_from_kernel                       38498      30798
   outl_to_kernel                        34508      28816
   wr_tsc_adjust_msr                     34185      26818
   rd_tsc_adjust_msr                     37409      27049
   mmio-no-eventfd:pci-mem               50563      45276
   mmio-wildcard-eventfd:pci-mem         34495      30823
   mmio-datamatch-eventfd:pci-mem        35612      31071
   portio-no-eventfd:pci-io              44925      40661
   portio-wildcard-eventfd:pci-io        29708      27269
   portio-datamatch-eventfd:pci-io       31135      27164

(I wrote a small C program to compare the tables for all values of CR0.WP,
CR4.SMAP and CR4.SMEP, and they match).
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

This patch exposes 5 level page table feature to the VM.
At the same time, the canonical virtual address checking is
extended to support both 48-bits and 57-bits address width.
Signed-off-by: Yu Zhang <yu.c.zhang@linux.intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Extends the shadow paging code, so that 5 level shadow page
table can be constructed if VM is running in 5 level paging
mode.

Also extends the ept code, so that 5 level ept table can be
constructed if maxphysaddr of VM exceeds 48 bits. Unlike the
shadow logic, KVM should still use 4 level ept table for a VM
whose physical address width is less than 48 bits, even when
the VM is running in 5 level paging mode.
Signed-off-by: Yu Zhang <yu.c.zhang@linux.intel.com>
[Unconditionally reset the MMU context in kvm_cpuid_update.
 Changing MAXPHYADDR invalidates the reserved bit bitmasks.
 - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Now we have 4 level page table and 5 level page table in 64 bits
long mode, let's rename the PT64_ROOT_LEVEL to PT64_ROOT_4LEVEL,
then we can use PT64_ROOT_5LEVEL for 5 level page table, it's
helpful to make the code more clear.

Also PT64_ROOT_MAX_LEVEL is defined as 4, so that we can just
redefine it to 5 whenever a replacement is needed for 5 level
paging.
Signed-off-by: Yu Zhang <yu.c.zhang@linux.intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Currently, KVM uses CR3_L_MODE_RESERVED_BITS to check the
reserved bits in CR3. Yet the length of reserved bits in
guest CR3 should be based on the physical address width
exposed to the VM. This patch changes CR3 check logic to
calculate the reserved bits at runtime.
Signed-off-by: Yu Zhang <yu.c.zhang@linux.intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Return false in kvm_cpuid() when it fails to find the cpuid
entry. Also, this routine(and its caller) is optimized with
a new argument - check_limit, so that the check_cpuid_limit()
fall back can be avoided.
Signed-off-by: Yu Zhang <yu.c.zhang@linux.intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

A guest may not be configured to support XSAVES/XRSTORS, even when the host
does. If the guest does not support XSAVES/XRSTORS, clear the secondary
execution control so that the processor will raise #UD.

Also clear the "allowed-1" bit for XSAVES/XRSTORS exiting in the
IA32_VMX_PROCBASED_CTLS2 MSR, and pass through VMCS12's control in
the VMCS02.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

A guest may not be configured to support RDSEED, even when the host
does. If the guest does not support RDSEED, intercept the instruction
and synthesize #UD. Also clear the "allowed-1" bit for RDSEED exiting
in the IA32_VMX_PROCBASED_CTLS2 MSR.
Signed-off-by: Jim Mattson <jmattson@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

A guest may not be configured to support RDRAND, even when the host
does. If the guest does not support RDRAND, intercept the instruction
and synthesize #UD. Also clear the "allowed-1" bit for RDRAND exiting
in the IA32_VMX_PROCBASED_CTLS2 MSR.
Signed-off-by: Jim Mattson <jmattson@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Currently, secondary execution controls are divided in three groups:

- static, depending mostly on the module arguments or the processor
  (vmx_secondary_exec_control)

- static, depending on CPUID (vmx_cpuid_update)

- dynamic, depending on nested VMX or local APIC state

Because walking CPUID is expensive, prepare_vmcs02 is using only
the first group.  This however is unnecessarily complicated.  Just
cache the static secondary execution controls, and then prepare_vmcs02
does not need to compute them every time.  Computation of all static
secondary execution controls is now kept in a single function,
vmx_compute_secondary_exec_control.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Enable the Virtual GIF feature. This is done by setting bit 25 at position
60h in the vmcb.

With this feature enabled, the processor uses bit 9 at position 60h as the
virtual GIF when executing STGI/CLGI instructions.

Since the execution of STGI by the L1 hypervisor does not cause a return to
the outermost (L0) hypervisor, the enable_irq_window and enable_nmi_window
are modified.

The IRQ window will be opened even if GIF is not set, under the assumption
that on resuming the L1 hypervisor the IRQ will be held pending until the
processor executes the STGI instruction.

For the NMI window, the STGI intercept is set. This will assist in opening
the window only when GIF=1.
Signed-off-by: Janakarajan Natarajan <Janakarajan.Natarajan@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Add a new cpufeature definition for Virtual GIF.
Signed-off-by: Janakarajan Natarajan <Janakarajan.Natarajan@amd.com>
Reviewed-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

We already always set that type but don't check if it is supported. Also
for nVMX, we only support WB for now. Let's just require it.
Signed-off-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>

Don't use shifts, tag them correctly as EPTP and use better matching
names (PWL vs. GAW).
Signed-off-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>

With lightly tweaked defconfig:

    text    data     bss      dec     hex filename
11259661 5109408 2981888 19350957 12745ad vmlinux.before
11259661 5109408  884736 17253805 10745ad vmlinux.after

Only compile-tested.
Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: pbonzini@redhat.com
Cc: rkrcmar@redhat.com
Cc: tglx@linutronix.de
Cc: mingo@redhat.com
Cc: hpa@zytor.com
Cc: x86@kernel.org
Cc: kvm@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>

There is currently some confusion between nested and L1 GPAs.  The
assignment to "direct" in kvm_mmu_page_fault tries to fix that, but
it is not enough.  What this patch does is fence off the MMIO cache
completely when using shadow nested page tables, since we have neither
a GVA nor an L1 GPA to put in the cache.  This also allows some
simplifications in kvm_mmu_page_fault and FNAME(page_fault).

The EPT misconfig likewise does not have an L1 GPA to pass to
kvm_io_bus_write, so that must be skipped for guest mode.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
[Changed comment to say "GPAs" instead of "L1's physical addresses", as
 per David's review. - Radim]
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>

When a guest causes a page fault which requires emulation, the
vcpu->arch.gpa_available flag is set to indicate that cr2 contains a
valid GPA.

Currently, emulator_read_write_onepage() makes use of gpa_available flag
to avoid a guest page walk for a known MMIO regions. Lets not limit
the gpa_available optimization to just MMIO region. The patch extends
the check to avoid page walk whenever gpa_available flag is set.
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
[Fix EPT=0 according to Wanpeng Li's fix, plus ensure VMX also uses the
 new code. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
[Moved "ret < 0" to the else brach, as per David's review. - Radim]
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>

Calling handle_mmio_page_fault() has been unnecessary since commit
e9ee956e ("KVM: x86: MMU: Move handle_mmio_page_fault() call to
kvm_mmu_page_fault()", 2016-02-22).

handle_mmio_page_fault() can now be made static.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>

When PAGE_OFFSET is not a compile-time constant, we run into
warnings from the use of kvm_is_error_hva() that the compiler
cannot optimize out:

arch/arm/kvm/../../../virt/kvm/kvm_main.c: In function '__kvm_gfn_to_hva_cache_init':
arch/arm/kvm/../../../virt/kvm/kvm_main.c:1978:14: error: 'nr_pages_avail' may be used uninitialized in this function [-Werror=maybe-uninitialized]
arch/arm/kvm/../../../virt/kvm/kvm_main.c: In function 'gfn_to_page_many_atomic':
arch/arm/kvm/../../../virt/kvm/kvm_main.c:1660:5: error: 'entry' may be used uninitialized in this function [-Werror=maybe-uninitialized]

This adds fake initializations to the two instances I ran into.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>

Host-initiated writes to the IA32_APIC_BASE MSR do not have to follow
local APIC state transition constraints, but the value written must be
valid.
Signed-off-by: Jim Mattson <jmattson@google.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Bailing out immediately if there is no available mmu page to alloc.

Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Wanpeng Li <wanpeng.li@hotmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

watchdog: BUG: soft lockup - CPU#5 stuck for 22s! [warn_test:3089]
 irq event stamp: 20532
 hardirqs last  enabled at (20531): [<ffffffff8e9b6908>] restore_regs_and_iret+0x0/0x1d
 hardirqs last disabled at (20532): [<ffffffff8e9b7ae8>] apic_timer_interrupt+0x98/0xb0
 softirqs last  enabled at (8266): [<ffffffff8e9badc6>] __do_softirq+0x206/0x4c1
 softirqs last disabled at (8253): [<ffffffff8e083918>] irq_exit+0xf8/0x100
 CPU: 5 PID: 3089 Comm: warn_test Tainted: G           OE   4.13.0-rc3+ #8
 RIP: 0010:kvm_mmu_prepare_zap_page+0x72/0x4b0 [kvm]
 Call Trace:
  make_mmu_pages_available.isra.120+0x71/0xc0 [kvm]
  kvm_mmu_load+0x1cf/0x410 [kvm]
  kvm_arch_vcpu_ioctl_run+0x1316/0x1bf0 [kvm]
  kvm_vcpu_ioctl+0x340/0x700 [kvm]
  ? kvm_vcpu_ioctl+0x340/0x700 [kvm]
  ? __fget+0xfc/0x210
  do_vfs_ioctl+0xa4/0x6a0
  ? __fget+0x11d/0x210
  SyS_ioctl+0x79/0x90
  entry_SYSCALL_64_fastpath+0x23/0xc2
  ? __this_cpu_preempt_check+0x13/0x20

This can be reproduced readily by ept=N and running syzkaller tests since
many syzkaller testcases don't setup any memory regions. However, if ept=Y
rmode identity map will be created, then kvm_mmu_calculate_mmu_pages() will
extend the number of VM's mmu pages to at least KVM_MIN_ALLOC_MMU_PAGES
which just hide the issue.

I saw the scenario kvm->arch.n_max_mmu_pages == 0 && kvm->arch.n_used_mmu_pages == 1,
so there is one active mmu page on the list, kvm_mmu_prepare_zap_page() fails
to zap any pages, however prepare_zap_oldest_mmu_page() always returns true.
It incurs infinite loop in make_mmu_pages_available() which causes mmu->lock
softlockup.

This patch fixes it by setting the return value of prepare_zap_oldest_mmu_page()
according to whether or not there is mmu page zapped.

Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Wanpeng Li <wanpeng.li@hotmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Let's reuse the function introduced with eptp switching.

We don't explicitly have to check against enable_ept_ad_bits, as this
is implicitly done when checking against nested_vmx_ept_caps in
valid_ept_address().
Signed-off-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Remove nonexistent files, allow less awkward expressions when
extracting arch-specific information, and only return relevant
information when using arch-specific expressions. Additionally
add include/trace/events/kvm.h, arch/*/include/uapi/asm/kvm*,
and arch/powerpc/kernel/kvm* to appropriate sections. The arch-
specific expressions are now:

 /KVM/                                        -- All KVM
 /\(KVM\)|\(KVM\/x86\)/                       -- X86
 /\(KVM\)|\(KVM\/x86\)|\(KVM\/amd\)/          -- X86 plus AMD
 /\(KVM\)|\(KVM\/arm\)/                       -- ARM
 /\(KVM\)|\(KVM\/arm\)|\(KVM\/arm64\)/        -- ARM plus ARM64
 /\(KVM\)|\(KVM\/powerpc\)/                   -- POWERPC
 /\(KVM\)|\(KVM\/s390\)/                      -- S390
 /\(KVM\)|\(KVM\/mips\)/                      -- MIPS
Signed-off-by: Andrew Jones <drjones@redhat.com>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Acked-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

This is the same as commit 14727754 ("kvm: svm: Add support for
additional SVM NPF error codes", 2016-11-23), but for Intel processors.
In this case, the exit qualification field's bit 8 says whether the
EPT violation occurred while translating the guest's final physical
address or rather while translating the guest page tables.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Commit 14727754 ("kvm: svm: Add support for additional SVM NPF error
codes", 2016-11-23) added a new error code to aid nested page fault
handling.  The commit unprotects (kvm_mmu_unprotect_page) the page when
we get a NPF due to guest page table walk where the page was marked RO.

However, if an L0->L2 shadow nested page table can also be marked read-only
when a page is read only in L1's nested page table.  If such a page
is accessed by L2 while walking page tables it can cause a nested
page fault (page table walks are write accesses).  However, after
kvm_mmu_unprotect_page we may get another page fault, and again in an
endless stream.

To cover this use case, we qualify the new error_code check with
vcpu->arch.mmu_direct_map so that the error_code check would run on L1
guest, and not the L2 guest.  This avoids hitting the above scenario.

Fixes: 14727754
Cc: stable@vger.kernel.org
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Cc: Thomas Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Reported by syzkaller:

The kvm-intel.unrestricted_guest=0

   WARNING: CPU: 5 PID: 1014 at /home/kernel/data/kvm/arch/x86/kvm//x86.c:7227 kvm_arch_vcpu_ioctl_run+0x38b/0x1be0 [kvm]
   CPU: 5 PID: 1014 Comm: warn_test Tainted: G        W  OE   4.13.0-rc3+ #8
   RIP: 0010:kvm_arch_vcpu_ioctl_run+0x38b/0x1be0 [kvm]
   Call Trace:
    ? put_pid+0x3a/0x50
    ? rcu_read_lock_sched_held+0x79/0x80
    ? kmem_cache_free+0x2f2/0x350
    kvm_vcpu_ioctl+0x340/0x700 [kvm]
    ? kvm_vcpu_ioctl+0x340/0x700 [kvm]
    ? __fget+0xfc/0x210
    do_vfs_ioctl+0xa4/0x6a0
    ? __fget+0x11d/0x210
    SyS_ioctl+0x79/0x90
    entry_SYSCALL_64_fastpath+0x23/0xc2
    ? __this_cpu_preempt_check+0x13/0x20

The syszkaller folks reported a residual mmio emulation request to userspace
due to vm86 fails to emulate inject real mode interrupt(fails to read CS) and
incurs a triple fault. The vCPU returns to userspace with vcpu->mmio_needed == true
and KVM_EXIT_SHUTDOWN exit reason. However, the syszkaller testcase constructs
several threads to launch the same vCPU, the thread which lauch this vCPU after
the thread whichs get the vcpu->mmio_needed == true and KVM_EXIT_SHUTDOWN will
trigger the warning.

   #define _GNU_SOURCE
   #include <pthread.h>
   #include <stdio.h>
   #include <stdlib.h>
   #include <string.h>
   #include <sys/wait.h>
   #include <sys/types.h>
   #include <sys/stat.h>
   #include <sys/mman.h>
   #include <fcntl.h>
   #include <unistd.h>
   #include <linux/kvm.h>
   #include <stdio.h>

   int kvmcpu;
   struct kvm_run *run;

   void* thr(void* arg)
   {
     int res;
     res = ioctl(kvmcpu, KVM_RUN, 0);
     printf("ret1=%d exit_reason=%d suberror=%d\n",
         res, run->exit_reason, run->internal.suberror);
     return 0;
   }

   void test()
   {
     int i, kvm, kvmvm;
     pthread_t th[4];

     kvm = open("/dev/kvm", O_RDWR);
     kvmvm = ioctl(kvm, KVM_CREATE_VM, 0);
     kvmcpu = ioctl(kvmvm, KVM_CREATE_VCPU, 0);
     run = (struct kvm_run*)mmap(0, 4096, PROT_READ|PROT_WRITE, MAP_SHARED, kvmcpu, 0);
     srand(getpid());
     for (i = 0; i < 4; i++) {
       pthread_create(&th[i], 0, thr, 0);
       usleep(rand() % 10000);
     }
     for (i = 0; i < 4; i++)
       pthread_join(th[i], 0);
   }

   int main()
   {
     for (;;) {
       int pid = fork();
       if (pid < 0)
         exit(1);
       if (pid == 0) {
         test();
         exit(0);
       }
       int status;
       while (waitpid(pid, &status, __WALL) != pid) {}
     }
     return 0;
   }

This patch fixes it by resetting the vcpu->mmio_needed once we receive
the triple fault to avoid the residue.
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Tested-by: Dmitry Vyukov <dvyukov@google.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Wanpeng Li <wanpeng.li@hotmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

This implements the kvm_arch_vcpu_in_kernel() for ARM, and adjusts
the calls to kvm_vcpu_on_spin().
Signed-off-by: Longpeng(Mike) <longpeng2@huawei.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

This implements kvm_arch_vcpu_in_kernel() for s390.  DIAG is a privileged
operation, so it cannot be called from problem state (user mode).
Signed-off-by: Longpeng(Mike) <longpeng2@huawei.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

get_cpl requires vcpu_load, so we must cache the result (whether the
vcpu was preempted when its cpl=0) in kvm_vcpu_arch.
Signed-off-by: Longpeng(Mike) <longpeng2@huawei.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>