- 15 Jul, 2016 22 commits
-
-
Philippe Reynes authored
The private structure contain a pointer to phydev, but the structure net_device already contain such pointer. So we can remove the pointer phy in the private structure, and update the driver to use the one contained in struct net_device. Signed-off-by:
Philippe Reynes <tremyfr@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Jesper Dangaard Brouer authored
The recent change to tracepoint napi:napi_poll changed the order of the parameters that perf scripts sees, the printk was correct. The problem was that the new parameters (work and budget) were pushed in front of dev_name. The new parameters obviously need to be appended to keep backward compatible. Fixes: 1db19db7 ("net: tracepoint napi:napi_poll add work and budget") Signed-off-by:
Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by:
-
Jason Wang authored
This patch switch to use skb array instead of sk_receive_queue to avoid spinlock contentions. Tests shows about 21% improvements for guest rx pps: Before: 1472731 pkts/s After: 1786289 pkts/s Signed-off-by:
Jason Wang <jasowang@redhat.com> Signed-off-by:
-
Jason Wang authored
We decide the rxq through calculating its hash which is not necessary if we only have one rx queue. So this patch skip this and just return queue 0. Test shows 22% improving on guest rx pps. Before: 1201504 pkts/s After: 1472731 pkts/s Signed-off-by:
-
David S. Miller authored
Daniel Borkmann says: ==================== BPF event output helper improvements This set adds improvements to the BPF event output helper to support non-linear data sampling, here specifically, for skb context. For details please see individual patches. The set is based against net-next tree. v1 -> v2: - Integrated and adapted Peter's diff into patch 1, updated the remaining ones accordingly. Thanks Peter! ==================== Signed-off-by: -
Daniel Borkmann authored
This work addresses a couple of issues bpf_skb_event_output() helper currently has: i) We need two copies instead of just a single one for the skb data when it should be part of a sample. The data can be non-linear and thus needs to be extracted via bpf_skb_load_bytes() helper first, and then copied once again into the ring buffer slot. ii) Since bpf_skb_load_bytes() currently needs to be used first, the helper needs to see a constant size on the passed stack buffer to make sure BPF verifier can do sanity checks on it during verification time. Thus, just passing skb->len (or any other non-constant value) wouldn't work, but changing bpf_skb_load_bytes() is also not the proper solution, since the two copies are generally still needed. iii) bpf_skb_load_bytes() is just for rather small buffers like headers, since they need to sit on the limited BPF stack anyway. Instead of working around in bpf_skb_load_bytes(), this work improves the bpf_skb_event_output() helper to address all 3 at once. We can make use of the passed in skb context that we have in the helper anyway, and use some of the reserved flag bits as a length argument. The helper will use the new __output_custom() facility from perf side with bpf_skb_copy() as callback helper to walk and extract the data. It will pass the data for setup to bpf_event_output(), which generates and pushes the raw record with an additional frag part. The linear data used in the first frag of the record serves as programmatically defined meta data passed along with the appended sample. Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Acked-by:
Alexei Starovoitov <ast@kernel.org> Signed-off-by:
-
Daniel Borkmann authored
Split the bpf_perf_event_output() helper as a preparation into two parts. The new bpf_perf_event_output() will prepare the raw record itself and test for unknown flags from BPF trace context, where the __bpf_perf_event_output() does the core work. The latter will be reused later on from bpf_event_output() directly. Signed-off-by:
-
Daniel Borkmann authored
This patch adds support for non-linear data on raw records. It extends raw records to have one or multiple fragments that will be written linearly into the ring slot, where each fragment can optionally have a custom callback handler to walk and extract complex, possibly non-linear data. If a callback handler is provided for a fragment, then the new __output_custom() will be used instead of __output_copy() for the perf_output_sample() part. perf_prepare_sample() does all the size calculation only once, so perf_output_sample() doesn't need to redo the same work anymore, meaning real_size and padding will be cached in the raw record. The raw record becomes 32 bytes in size without holes; to not increase it further and to avoid doing unnecessary recalculations in fast-path, we can reuse next pointer of the last fragment, idea here is borrowed from ZERO_OR_NULL_PTR(), which should keep the perf_output_sample() path for PERF_SAMPLE_RAW minimal. This facility is needed for BPF's event output helper as a first user that will, in a follow-up, add an additional perf_raw_frag to its perf_raw_record in order to be able to more efficiently dump skb context after a linear head meta data related to it. skbs can be non-linear and thus need a custom output function to dump buffers. Currently, the skb data needs to be copied twice; with the help of __output_custom() this work only needs to be done once. Future users could be things like XDP/BPF programs that work on different context though and would thus also have a different callback function. The few users of raw records are adapted to initialize their frag data from the raw record itself, no change in behavior for them. The code is based upon a PoC diff provided by Peter Zijlstra [1]. [1] http://thread.gmane.org/gmane.linux.network/421294Suggested-by:
Peter Zijlstra <peterz@infradead.org> Signed-off-by:
-
Dan Carpenter authored
The rxrpc_lookup_peer() function returns NULL on error, it never returns error pointers. Fixes: 8496af50 ('rxrpc: Use RCU to access a peer's service connection tree') Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
David Howells <dhowells@redhat.com> Signed-off-by:
-
Philipp Zabel authored
We can't detect the FXEN (fiber mode) bootstrap pin, so configure it via a boolean device tree property "micrel,fiber-mode". If it is enabled, auto-negotiation is not supported. The only available modes are 100base-fx (full duplex and half duplex). Signed-off-by:
Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by:
-
Dan Carpenter authored
There is a 2 byte struct whole after line.loopback so we need to clear that out to avoid disclosing stack information. Fixes: c19b6d24 ('drivers/net: support hdlc function for QE-UCC') Signed-off-by:
-
David S. Miller authored
Sowmini Varadhan says: ==================== RDS: TCP: Enable mprds for rds-tcp The third, and final, installment for mprds-tcp changes. In Patch 3 of this set, if the transport support t_mp_capable, we hash outgoing traffic across multiple paths. Additionally, even if the transport is MP capable, we may be peering with some node that does not support mprds, or supports a different number of paths. This necessitates RDS control plane changes so that both peers agree on the number of paths to be used for the rds-tcp connection. Patch 3 implements all these changes, which are documented in patch 5 of the series. Patch 1 of this series is a bug fix for a race-condition that has always existed, but is now more easily encountered with mprds. Patch 2 is code refactoring. Patches 4 and 5 are Documentation updates. ==================== Signed-off-by: -
Sowmini Varadhan authored
Document the design of mprds, covering a brief description of the motivation, data-structures and modifications to the RDS control plane. Acked-by:
Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by:
Sowmini Varadhan <sowmini.varadhan@oracle.com> Signed-off-by:
-
Sowmini Varadhan authored
Update the documentation to describe the changes added by commit 8ba38460 ("net/rds Add getsockopt support for SO_RDS_TRANSPORT") Acked-by:
-
Sowmini Varadhan authored
Use RDS probe-ping to compute how many paths may be used with the peer, and to synchronously start the multiple paths. If mprds is supported, hash outgoing traffic to one of multiple paths in rds_sendmsg() when multipath RDS is supported by the transport. CC: Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by:
-
Sowmini Varadhan authored
Some code duplication in rds_tcp_reset_callbacks() can be avoided by having the function call rds_tcp_restore_callbacks() and rds_tcp_set_callbacks(). Acked-by:
-
Sowmini Varadhan authored
As the existing comments in rds_tcp_listen_data_ready() indicate, it is possible under some race-windows to get to this function with the accept() socket. If that happens, we could run into a sequence whereby thread 1 thread 2 rds_tcp_accept_one() thread sets up new_sock via ->accept(). The sk_user_data is now sock_def_readable data comes in for new_sock, ->sk_data_ready is called, and we land in rds_tcp_listen_data_ready rds_tcp_set_callbacks() takes the sk_callback_lock and sets up sk_user_data to be the cp read_lock sk_callback_lock ready = cp unlock sk_callback_lock page fault on ready In the above sequence, we end up with a panic on a bad page reference when trying to execute (*ready)(). Instead we need to call sock_def_readable() safely, which is what this patch achieves. Acked-by:
-
Arnd Bergmann authored
Including devlink.h on ARM and probably other 32-bit architectures results in a harmless warning: In file included from ../include/trace/define_trace.h:95:0, from ../include/trace/events/devlink.h:51, from ../net/core/devlink.c:30: include/trace/events/devlink.h: In function 'trace_raw_output_devlink_hwmsg': include/trace/events/devlink.h:42:12: error: format '%lu' expects argument of type 'long unsigned int', but argument 10 has type 'size_t {aka unsigned int}' [-Werror=format=] The correct format string for 'size_t' is %zu, not %lu, this works on all architectures. Signed-off-by:Arnd Bergmann <arnd@arndb.de> Fixes: e5224f0f ("devlink: add hardware messages tracing facility") Signed-off-by:
Jiri Pirko <jiri@mellanox.com> Acked-by:
Randy Dunlap <rdunlap@infradead.org> Signed-off-by:
-
Jiri Pirko authored
Turned on that driver->owner which is struct module is not available when modules are disabled. Better to depend on a driver name which is always available. Reported-by:
Steven Rostedt <rostedt@goodmis.org> Signed-off-by:
-
Christophe Jaillet authored
'vr' should be a valid pointer here, so returning 'PTR_ERR(vr)' is wrong. Return an explicit error code (-ENOENT) instead. Fixes: 61c503f9 ("mlxsw: spectrum_router: Implement fib4 add/del switchdev obj ops") Signed-off-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Acked-by:
-
Philippe Reynes authored
There are two generics functions phy_ethtool_{get|set}_link_ksettings, so we can use them instead of defining the same code in the driver. Signed-off-by: -
Philippe Reynes authored
The private structure contain a pointer to phydev, but the structure net_device already contain such pointer. So we can remove the pointer phy in the private structure, and update the driver to use the one contained in struct net_device. Signed-off-by:
-
- 14 Jul, 2016 18 commits
-
-
David S. Miller authored
Merge tag 'wireless-drivers-next-for-davem-2016-07-13' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next Kalle Valo says: ==================== wireless-drivers-next patches for 4.8 Major changes: iwlwifi * more work on the RX path for the 9000 device series * some more dynamic queue allocation work * SAR BIOS implementation * some work on debugging capabilities * added support for GCMP encryption * data path rework in preparation for new HW * some cleanup to remove transport dependency on mac80211 * support for MSIx in preparation for new HW * lots of work in preparation for HW support (9000 and a000 series) mwifiex * implement get_tx_power and get_antenna cfg80211 operation callbacks wl18xx * add support for 64bit clock rtl8xxxu * aggregation support (optional for now) Also wireless-drivers is merged to fix some conflicts. ==================== Signed-off-by:
-
David S. Miller authored
Jesper Dangaard Brouer says: ==================== pktgen samples: new scripts and removing older samples This patchset is adding some pktgen sample scripts that I've been using for a while[1], and they seams to relevant for more people. Patchset also remove some of the older style pktgen samples. [1] https://github.com/netoptimizer/network-testing/tree/master/pktgen ==================== Signed-off-by:
-
Jesper Dangaard Brouer authored
Removing the pktgen sample script pktgen.conf-1-1-rdos, because it does not contain anything that is not covered by the other and newer style sample scripts. Signed-off-by:
-
Jesper Dangaard Brouer authored
This pktgen sample script is useful for scalability testing a receiver. The script will simply generate one flow per thread (option -t N) using the thread number as part of the source IP-address. The single flow sample (pktgen_sample03_burst_single_flow.sh) have become quite popular, but it is important that developers also make sure to benchmark scalability of multiple receive queues. Signed-off-by:
-
Jesper Dangaard Brouer authored
Adding a pktgen sample script that demonstrates how to use pktgen for simulating flows. Script will generate a certain number of concurrent flows ($FLOWS) and each flow will contain $FLOWLEN packets, which will be send back-to-back, before switching to a new flow, due to flag FLOW_SEQ. This script obsoletes the old sample script 'pktgen.conf-1-1-flows', which is removed. Signed-off-by:
-
David S. Miller authored
Saeed Mahameed says: ==================== Mellanox 100G mlx5 Bulk flow statistics and SRIOV TC offloads This series from Amir and Or deals with two enhancements for the mlx5 TC offloads. The 1st two patches add bulk reading of flow counters. Few bulk counter queries are used instead of issuing thousands firmware commands per second to get statistics of all flows set to HW. The next patches add TC based SRIOV offloading to mlx5, as a follow up for the e-switch offloads mode and the VF representors. When the e-switch is set to the (new) "offloads" mode, we can now offload TC/flower drop and forward rules, the forward action we offload is TC mirred/redirect. The above is done by the VF representor netdevices exporting the setup_tc ndo where from there we're re-using and enhancing the existing mlx5 TC offloads sub-module which now works for both the NIC and the SRIOV cases. The series is applied on top b38a75d2 ('mlxsw: core: Trace EMAD messages') and it has no merge issues with the on-going net submission ('mlx5 tx timeout watchdog fixes') V2: - Fixed compilation warning. ==================== Signed-off-by:
-
Or Gerlitz authored
The VF representors support only TC filter/action offloads (not mqprio) and this is enabled for them by default. Signed-off-by:
Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by:
Saeed Mahameed <saeedm@mellanox.com> Signed-off-by:
-
Or Gerlitz authored
Enhance the TC offload code such that when the eswitch exists and it's mode being SRIOV offloads, we do TC actions parsing and setup targeted for eswitch. Next, we add the offloaded flow to the HW e-switch (fdb). Signed-off-by:
-
Or Gerlitz authored
Add the setup code that parses the TC actions needed to support offloading drop and mirred/redirect for SRIOV e-switch. We can redirect between two devices if they belong to the same HW switch, compare the switchdev HW ID attribute to enforce that. Signed-off-by:
-
Or Gerlitz authored
This helper serves to know if two switchdev port netdevices belong to the same HW ASIC, e.g to figure out if forwarding offload is possible between them. Signed-off-by:
-
Or Gerlitz authored
Towards reusing the TC offloads code for an SRIOV use-case, change some of the helper functions to have _nic in their names so it's clear what's NIC unique and what's general. Also group together the NIC related helpers so we can easily branch per the use-case in downstream patch. Signed-off-by:
-
Or Gerlitz authored
This allows for upper levels in the driver, e.g the TC offload code to add e-switch offloaded steering rules. The caller provides the rule spec for matching, action, source and destination vports. Signed-off-by:
-
Or Gerlitz authored
In the offloads mode, some slow path rules are added by the driver (e.g send-to-vport), while offloaded rules are to be added from upper layers. The slow path rules have lower priority and we don't want matching on offloaded rules to suffer from extra steering hops related to the slow path rules. We use two priorities, one for offloaded rules (fast path), and one for the control rules (slow path). To allow for that, we enable two priorities for the FDB namespace in the FS core code. Signed-off-by:
-
Or Gerlitz authored
Currenly, the code that programs the flow actions into the firmware doesn't check if was actually asked to offload the statistics, fix that. Fixes: aad7e08d ('net/mlx5e: Hardware offloaded flower filter statistics support') Signed-off-by:
-
Amir Vadai authored
This commit utilize the ability of ConnectX-4 to bulk read flow counters. Few bulk counter queries could be done instead of issuing thousands of firmware commands per second to get statistics of all flows set to HW, such as those programmed when we offload tc filters. Counters are stored sorted by hardware id, and queried in blocks (id + number of counters). Due to hardware requirement, start of block and number of counters in a block must be four aligned. Reviewed-by:
Amir Vadai <amir@vadai.me> Signed-off-by:
-
Amir Vadai authored
In order to use bulk counters, we need to have counters sorted by id. Signed-off-by:
-
David S. Miller authored
Elad Kanfi says: ==================== Code style fixes Fix all checkpatch warnings and errors, and reuse code ==================== Signed-off-by: -
Elad Kanfi authored
Add inline function that checks if there is a pending tx packet. Signed-off-by:
Elad Kanfi <eladkan@mellanox.com> Signed-off-by:
-
