- 29 Aug, 2011 3 commits
-
-
Larry Finger authored
Smatch outputs the following message: drivers/staging/rtl8192e/r8192E_cmdpkt.c +412 cmpk_message_handle_rx(70) error: buffer overflow 'priv->stats.rxcmdpkt' 4 <= 7 407 RT_TRACE(COMP_CMDPKT, "---->cmpk_message_handle_rx():" 408 "unknow CMD Element\n"); 409 return 1; 410 } 411 412 priv->stats.rxcmdpkt[element_id]++; ^^^^^^^^^^ ->stats.rxcmdpkt[] only has 4 elements, but from the switch statement in the section before we can see that element_id can go up to 7 (RX_TX_RATE_HISTORY). Reported-by:Dan Carpenter <error27@gmail.com> Signed-off-by:
Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by:
Greg Kroah-Hartman <gregkh@suse.de>
-
Greg Kroah-Hartman authored
This resolves a conflict with: drivers/staging/brcm80211/brcmsmac/types.h Signed-off-by: -
Linus Torvalds authored
-
- 28 Aug, 2011 1 commit
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pmLinus Torvalds authored
* 'pm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ARM: mach-shmobile: sh7372 LCDC1 suspend fix V2 (incremental) OMAP: omap_device: only override _noirq methods, not normal suspend/resume PM / Runtime: Correct documentation of pm_runtime_irq_safe() ARM: mach-shmobile: sh7372 LCDC1 suspend fix sh-sci / PM: Use power.irq_safe PM: Use spinlock instead of mutex in clock management functions
-
- 27 Aug, 2011 2 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6Linus Torvalds authored
* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6: firewire: sbp2: fix panic after rmmod with slow targets
-
Magnus Damm authored
This patch updates the recently submitted "Associate the HDMI clock together with LCDC1 on sh7372" to V2 with the following change: - Use lcdc1_device on AP4EVB to build properly. Signed-off-by:
Magnus Damm <damm@opensource.se> Signed-off-by:
Rafael J. Wysocki <rjw@sisk.pl>
-
- 26 Aug, 2011 34 commits
-
-
NeilBrown authored
The nfsservctl system call is now gone, so we should remove all linkage for it. Signed-off-by:
NeilBrown <neilb@suse.de> Signed-off-by:
J. Bruce Fields <bfields@redhat.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/keithp/linux-2.6Linus Torvalds authored
* 'drm-intel-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/keithp/linux-2.6: drm/i915: Fix wrong initializer for "locked" variable in assert_panel_unlocked i915: do not setup intel_backlight twice
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6Linus Torvalds authored
* 'usb-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: (30 commits) USB: ftdi_sio: add Calao reference board support USB option driver K3765/K4505 avoid CDC_DATA interface USB: option: add YUGA device id to driver usb: s5p-ehci: fix a NULL pointer deference USB: EHCI: Do not rely on PORT_SUSPEND to stop USB resuming in ehci_bus_resume(). USB option driver add PID of Huawei Vodafone K4605 USB option driver add PID of Huawei Vodafone K3806 xhci: Handle zero-length isochronous packets. USB: Avoid NULL pointer deref in usb_hcd_alloc_bandwidth. usb: musb: gadget: fix error path usb: gadget: f_phonet: unlock in error case usb: musb: blackfin: include prefetch head file usb: musb: tusb6010: fix compilation usb: gadget: renesas_usbhs: fix DMA build by including dma-mapping.h usb: musb: cppi: fix build errors due to DBG and missing musb variable usb: musb: ux500: replace missing DBG with dev_dbg usb: musb: ux500: set dma config for both src and dst usb: musb: fix oops on musb_gadget_pullup usb: host: ehci-omap: fix .remove and failure handling path of .probe(v1) usb: gadget: hid: don't STALL when processing a HID Descriptor request ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6Linus Torvalds authored
* 'tty-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6: omap-serial: Allow IXON and IXOFF to be disabled. TTY: serial, document ignoring of uart->ops->startup error TTY: pty, fix pty counting 8250: Fix race condition in serial8250_backup_timeout(). serial/8250_pci: delete duplicate data definition 8250_pci: add support for Rosewill RC-305 4x serial port card tty: Add "spi:" prefix for spi modalias atmel_serial: fix atmel_default_console_device serial: 8250_pnp: add Intermec CV60 touchscreen device drivers/serial/ucc_uart.c: Fix compiler warning pch_uart: Set PCIe bus number using probe parameter serial: samsung: Fix build error
-
Linus Torvalds authored
Merge branch 'driver-core-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6 * 'driver-core-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6: drivers:misc: ti-st: fix unexpected UART close drivers:misc: ti-st: free skb on firmware download drivers:misc: ti-st: wait for completion at fail drivers:misc: ti-st: reinit completion before send drivers:misc: ti-st: fail-safe on wrong pkt type drivers:misc: ti-st: reinit completion on ver read drivers:misc:ti-st: platform hooks for chip states drivers:misc: ti-st: avoid a misleading dbg msg base/devres.c: quiet sparse noise about context imbalance pti: add missing CONFIG_PCI dependency drivers/base/devtmpfs.c: correct annotation of `setup_done' driver core: fix kernel-doc warning in platform.c firmware: fix google/gsmi.c build warning
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6Linus Torvalds authored
* 'staging-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6: staging: tidspbridge: fix compilation on dsp clock functions staging: octeon-ethernet: Add missing #includes. Staging: zcache: signedness bug in tmem_get() staging: zcache: fix crash on high memory swap staging: brcm80211: SPARC build error fix staging: brcm80211: fix compile error on non-x86 archs since 3.0 kernel
-
Randy Dunlap authored
RTS5139 should depend on USB, not USB_SUPPORT, to fix build errors. USB_SUPPORT can be enabled for gadget-only support or when PCI is not enabled. ERROR: "usb_reset_endpoint" [drivers/staging/rts5139/rts5139.ko] undefined! ERROR: "usb_kill_urb" [drivers/staging/rts5139/rts5139.ko] undefined! ERROR: "usb_deregister_dev" [drivers/staging/rts5139/rts5139.ko] undefined! ERROR: "usb_unlink_urb" [drivers/staging/rts5139/rts5139.ko] undefined! ERROR: "usb_deregister" [drivers/staging/rts5139/rts5139.ko] undefined! ERROR: "usb_register_dev" [drivers/staging/rts5139/rts5139.ko] undefined! ERROR: "usb_free_coherent" [drivers/staging/rts5139/rts5139.ko] undefined! ERROR: "usb_submit_urb" [drivers/staging/rts5139/rts5139.ko] undefined! ERROR: "usb_sg_cancel" [drivers/staging/rts5139/rts5139.ko] undefined! ERROR: "usb_find_interface" [drivers/staging/rts5139/rts5139.ko] undefined! ERROR: "usb_sg_init" [drivers/staging/rts5139/rts5139.ko] undefined! ERROR: "usb_register_driver" [drivers/staging/rts5139/rts5139.ko] undefined! ERROR: "usb_alloc_coherent" [drivers/staging/rts5139/rts5139.ko] undefined! ERROR: "usb_free_urb" [drivers/staging/rts5139/rts5139.ko] undefined! ERROR: "usb_alloc_urb" [drivers/staging/rts5139/rts5139.ko] undefined! Signed-off-by:
Randy Dunlap <rdunlap@xenotime.net> Cc: Edwin Rong <edwin_rong@realsil.com.cn> Signed-off-by:
-
Roland Vossen authored
Code cleanup. Reshuffled functions so that the declarations were not necessary anymore. Reported-by:
Johannes Berg <johannes@sipsolutions.net> Signed-off-by:
Roland Vossen <rvossen@broadcom.com> Signed-off-by:
-
Roland Vossen authored
Reviewed-by:
Arend van Spriel <arend@broadcom.com> Reviewed-by:
Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by:
-
Roland Vossen authored
Macro's were not used so they were removed. Reviewed-by:
-
Roland Vossen authored
Code cleanup. Preprocessor constant EXT_CBALL was never defined so removed related code. Reviewed-by:
-
Roland Vossen authored
On some platforms resource_size_t == 64 but but unsigned long is only 32-bits. In this particular problem, reported and fixed by Tony Breeds, a physical address was truncated as a result. Reported-by:
Tony Breeds <tony@bakeyournoodle.com> Reviewed-by:
-
Roland Vossen authored
Code cleanup. Physical addresses in dma.c are all allocated by calls to pci_alloc_consistent(). Since that call returns physical addresses as type 'dma_addr_t', all physical addresses in dma.c were changed from 'unsigned long' to 'dma_addr_t'. Reviewed-by:
-
Roland Vossen authored
Code cleanup. Preprocessor symbol BCMDMASGLISTOSL was never defined. Reviewed-by:
-
Arend van Spriel authored
This function is similar to ffs() wihch is provided by the linux kernel already. This patch replaces brcmf_find_msb() with ffs(). Reported-by:
Franky (Zhenhui) Lin <frankyl@broadcom.com> Reviewed-by:
-
Arend van Spriel authored
The key endian conversion functions in wl_cfg80211.c have been renamed as the old names were misleasing. Reported-by:
-
Arend van Spriel authored
The Makefile for the brcmfmac driver contains macro definitions that are always set. This patch removes those definitions from the Makefile and source code. Reported-by:
-
Arend van Spriel authored
The macro WL11N_20MHZONLY is never defined so code #ifdef'ed by it has been removed. Reviewed-by:
-
Arend van Spriel authored
The Makefile for the brcmsmac driver contains macro definitions that are always set and even some are not used in the source code anymore. This patch removes those definitions from the Makefile and source code. Reported-by:
-
Arend van Spriel authored
The use of the definition BCMDMA32 was already removed from the source code, but it was still defined in the top-level Makefile. This patch removes it. Reported-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/lwfinger/r8192EGreg Kroah-Hartman authored
* git://git.kernel.org/pub/scm/linux/kernel/git/lwfinger/r8192E: (25 commits) rtl8192e: update for ndo_set_multicast_list removal. staging: rtl8192e: Add endian checking switch to Makefile staging: rtl8192e: Fix sparse (non-endian) warnings - Part II staging: rtl8192e: Fix sparse (non-endian) messages - Part I staging: rtl8192e: Remove MAC_FMT and MAC_ARG for %pM staging: rtl8192e: Cleanup checkpatch -f warnings and errors - Part XVIII staging: rtl8192e: Cleanup checkpatch -f warnings and errors - Part XVII staging: rtl8192e: Cleanup checkpatch -f warnings and errors - Part XVI staging: rtl8192e: Cleanup checkpatch -f warnings and errors - Part XV staging: rtl8192e: Cleanup checkpatch -f errors - Part XIV staging: rtl8192e: Cleanup checkpatch -f errors - Part XIII staging: rtl8192e: Cleanup checkpatch -f warnings and errors - Part XII staging: rtl8192e: Cleanup checkpatch -f warnings and errors - Part XI staging: rtl8192e: Cleanup checkpatch -f errors - Part X staging: rtl8192e: Cleanup checkpatch -f warnings and errors - Part IX staging: rtl8192e: Cleanup checkpatch -f warnings and errors - Part VIII staging: rtl8192e: Cleanup checkpatch -f warnings and errors - Part VII staging: rtl8192e: Cleanup checkpatch -f warnings and errors - Part VI staging: rtl8192e: Cleanup checkpatch -f warnings and errors - Part V staging: rtl8192e: Cleanup checkpatch -f warnings and errors - Part IV ...
-
Alan Cox authored
This isn't ideal as we could do with deferring the power on a lot more on Oaktrail and Medfield. We can't however do that without fixing other things first. Signed-off-by:
Alan Cox <alan@linux.intel.com> Signed-off-by:
-
Alan Cox authored
Initial changes to get backlight behaviour we want and to fix backlight crashes on suspend/resume paths. [Note: on some boxes this will now produce a warning about the backlight, this isn't a regression it's an unfixed but non harmful case I still need to nail] Signed-off-by:
-
Alan Cox authored
During the power split ups and work a chunk of code escaped into the Poulsbo code path which it isn't for. On some devices such as the Dell mini-10 this causes problems. Signed-off-by:
-
Akshay Joshi authored
Convert the spaces within the accel_2d.c file to tabs in order to comply with the coding style of the kernel. Signed-off-by:
Akshay Joshi <me@akshayjoshi.com> Signed-off-by:
-
Alan Cox authored
Signed-off-by:
-
Patrik Jakobsson authored
Signed-off-by:
Patrik Jakobsson <patrik.r.jakobsson@gmail.com> Signed-off-by:
-
Patrik Jakobsson authored
Chipset reports MSI capabilities for Poulsbo even though it isn't really there. Signed-off-by:
-
Patrik Jakobsson authored
First step in adding proper irq handling. We'll start with poulsbo support so make sure other chips don't touch drm_irq_install(). Signed-off-by:
-
git://git390.marist.edu/pub/scm/linux-2.6Linus Torvalds authored
* 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6: [S390] memory hotplug: only unassign assigned increments [S390] Change default action from reipl to stop for on_restart [S390] arch/s390/kernel/ipl.c: correct error detection check [S390] drivers/s390/block/dasd_ioctl.c: add missing kfree [S390] nss,initrd: kernel image and initrd must be in different segments
-
Kirill A. Shutemov authored
According to the SFI specification irq number 0xFF means device has no interrupt or interrupt attached via GPIO. Currently, we don't handle this special case and set irq field in *_board_info structs to 255. It leads to confusion in some drivers. Accelerometer driver tries to register interrupt 255, fails and prints "Cannot get IRQ" to dmesg. Signed-off-by:
Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6Linus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6: (32 commits) ALSA: hda: Conexant: Allow different output types to share DAC ASoC: Correct element count for WM8996 sidetone HPF ASoC: Tegra: wm8903 machine driver: Drop Ventana support ASoC: Add samsung maintainer ASoC: Add Springbank I/O card to Speyside Kconfig ALSA: hda/conexant - Enable ADC-switching for auto-mic mode, too ALSA: hda - Fix double-headphone/speaker paths for Cxt auto-parser ALSA: hda - Update jack-sense info even when no automute is set ALSA: hda - Fix output-path initialization for Realtek auto-parser sound/soc/fsl/mpc8610_hpcd.c: add missing of_node_put sound/soc/fsl/p1022_ds.c: add missing of_node_put sound/soc/ep93xx/ep93xx-i2s.c: add missing kfree sound/soc/kirkwood/kirkwood-i2s.c: add missing kfree ASoC: soc-core: use GFP_KERNEL flag for kmalloc in snd_soc_cnew sound/soc/fsl/fsl_dma.c: add missing of_node_put ASoC: Clear completions from late WM8996 FLL lock IRQs ASoC: Clear any outstanding WM8962 FLL lock completions before waiting ASoC: Ensure we only run Speyside WM8962 bias level callbacks once ASoC: Fix configuration of WM8996 input enables ASoC: WM8996 record paths need AIFCLK ...
-
Takashi Iwai authored
-
Stephen Rothwell authored
After merging the staging tree, today's linux-next build (x86_64 allmodconfig) failed like this: drivers/staging/rtl8192e/rtl_core.c:2917:2: error: unknown field 'ndo_set_multicast_list' specified in initializer Caused by commit 94a79942 ("From: wlanfae <wlanfae@realtek.com>" - really "[PATCH 1/8] rtl8192e: Import new version of driver from realtek" Signed-off-by:
Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by:
-
