Xin Long says:

====================
sctp: fix the incorrect revert

commit 35b4f244 ("sctp: do asoc update earlier in
sctp_sf_do_dupcook_a") only keeps the SHUTDOWN and
COOKIE-ACK with the same asoc, not transport.

So instead of revert commit 145cb2f7 ("sctp: Fix bundling
of SHUTDOWN with COOKIE-ACK"), we should revert 12dfd78e
("sctp: Fix SHUTDOWN CTSN Ack in the peer restart case").
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

This reverts commit 12dfd78e.

This can be reverted as shutdown and cookie_ack chunk are using the
same asoc since commit 35b4f244 ("sctp: do asoc update earlier
in sctp_sf_do_dupcook_a").
Reported-by: Jere Leppänen <jere.leppanen@nokia.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This reverts commit 7e9269a5.

As Jere notice, commit 35b4f244 ("sctp: do asoc update earlier
in sctp_sf_do_dupcook_a") only keeps the SHUTDOWN and COOKIE-ACK
with the same asoc, not transport. So we have to bring this patch
back.
Reported-by: Jere Leppänen <jere.leppanen@nokia.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

In enic_hard_start_xmit, it calls enic_queue_wq_skb(). Inside
enic_queue_wq_skb, if some error happens, the skb will be freed
by dev_kfree_skb(skb). But the freed skb is still used in
skb_tx_timestamp(skb).

My patch makes enic_queue_wq_skb() return error and goto spin_unlock()
incase of error. The solution is provided by Govind.
See https://lkml.org/lkml/2021/4/30/961.

Fixes: fb7516d4 ("enic: add sw timestamp support")
Signed-off-by: Lv Yunlong <lyl2019@mail.ustc.edu.cn>
Acked-by: Govindarajulu Varadarajan <gvaradar@cisco.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

In commit f4da5652 ("net: stmmac: Add support for external
trigger timestamping"), struct stmmac_priv was declared at line 507
which caused duplicate struct declarations.
Remove later duplicate declaration here.
Signed-off-by: Wan Jiabing <wanjiabing@vivo.com>
Reviewed-by: Wong Vee Khee <vee.khee.wong@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

A number of PHYs support the PHY tunable to set and get
downshift. However, only 88E1116R enables downshift by default. Extend
this default enabled to all the PHYs that support the downshift
tunable.
Signed-off-by: Maxim Kochetkov <fido_max@inbox.ru>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

Xin Long says:

====================
sctp: always send a chunk with the asoc that it belongs to

Currently when processing a duplicate COOKIE-ECHO chunk, a new temp
asoc would be created, then it creates the chunks with the new asoc.
However, later on it uses the old asoc to send these chunks, which
has caused quite a few issues.

This patchset is to fix this and make sure that the COOKIE-ACK and
SHUTDOWN chunks are created with the same asoc that will be used to
send them out.

v1->v2:
  - see Patch 3/3.
====================
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The same thing should be done for sctp_sf_do_dupcook_b().
Meanwhile, SCTP_CMD_UPDATE_ASSOC cmd can be removed.

v1->v2:
  - Fix the return value in sctp_sf_do_assoc_update().
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This can be reverted as shutdown and cookie_ack chunk are using the
same asoc since the last patch.

This reverts commit 145cb2f7.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

There's a panic that occurs in a few of envs, the call trace is as below:

  [] general protection fault, ... 0x29acd70f1000a: 0000 [#1] SMP PTI
  [] RIP: 0010:sctp_ulpevent_notify_peer_addr_change+0x4b/0x1fa [sctp]
  []  sctp_assoc_control_transport+0x1b9/0x210 [sctp]
  []  sctp_do_8_2_transport_strike.isra.16+0x15c/0x220 [sctp]
  []  sctp_cmd_interpreter.isra.21+0x1231/0x1a10 [sctp]
  []  sctp_do_sm+0xc3/0x2a0 [sctp]
  []  sctp_generate_timeout_event+0x81/0xf0 [sctp]

This is caused by a transport use-after-free issue. When processing a
duplicate COOKIE-ECHO chunk in sctp_sf_do_dupcook_a(), both COOKIE-ACK
and SHUTDOWN chunks are allocated with the transort from the new asoc.
However, later in the sideeffect machine, the old asoc is used to send
them out and old asoc's shutdown_last_sent_to is set to the transport
that SHUTDOWN chunk attached to in sctp_cmd_setup_t2(), which actually
belongs to the new asoc. After the new_asoc is freed and the old asoc
T2 timeout, the old asoc's shutdown_last_sent_to that is already freed
would be accessed in sctp_sf_t2_timer_expire().

Thanks Alexander and Jere for helping dig into this issue.

To fix it, this patch is to do the asoc update first, then allocate
the COOKIE-ACK and SHUTDOWN chunks with the 'updated' old asoc. This
would make more sense, as a chunk from an asoc shouldn't be sent out
with another asoc. We had fixed quite a few issues caused by this.

Fixes: 145cb2f7 ("sctp: Fix bundling of SHUTDOWN with COOKIE-ACK")
Reported-by: Alexander Sverdlin <alexander.sverdlin@nokia.com>
Reported-by: syzbot+bbe538efd1046586f587@syzkaller.appspotmail.com
Reported-by: Michal Tesar <mtesar@redhat.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add Marc Dionne as a co-maintainer for kafs and rxrpc.
Signed-off-by: Marc Dionne <marc.dionne@auristor.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Remove it from the MODULE_AUTHOR statements referencing it.
Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

Variable 'err' is set to zero but this value is never read as it is
overwritten with a new value later on, hence it is a redundant
assignment and can be removed.

Clean up the following clang-analyzer warning:

net/vmw_vsock/vmci_transport.c:948:2: warning: Value stored to 'err' is
never read [clang-analyzer-deadcode.DeadStores]
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Huazhong Tan says:

====================
net: hns3: fixes for -net

This series adds some bugfixes for the HNS3 ethernet driver.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

If selftest and reset are performed at the same time, the phy
loopback setting may be still in enable state after the reset,
and device cannot link up. So fix this issue by disabling phy
loopback before phy_start().

Fixes: 256727da ("net: hns3: Add MDIO support to HNS3 Ethernet driver for hip08 SoC")
Signed-off-by: Yufeng Mo <moyufeng@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

HW error and global reset are reported through MSIX interrupts.
The same error may be reported to different functions at the
same time. When global reset begins, the pending reset request
set by this error is unnecessary. So clear the pending reset
request after the reset is complete to avoid the repeated reset.

Fixes: f6162d44 ("net: hns3: add handling of hw errors reported through MSIX")
Signed-off-by: Yufeng Mo <moyufeng@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Currently, netif_tx_stop_all_queues() is used to ensure that
the xmit is not running, but for the concurrent case it will
not take effect, since netif_tx_stop_all_queues() just sets
a flag without locking to indicate that the xmit queue(s)
should not be run.

So use netif_tx_disable() to replace netif_tx_stop_all_queues(),
it takes the xmit queue lock while marking the queue stopped.

Fixes: 76ad4f0e ("net: hns3: Add support of HNS3 Ethernet Driver for hip08 SoC")
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When skb->ip_summed is CHECKSUM_PARTIAL, for non-tunnel udp packet,
which has a dest port as the IANA assigned, the hardware is expected
to do the checksum offload, but the hardware whose version is below
V3 will not do the checksum offload when udp dest port is 4790.

So fixes it by doing the checksum in software for this case.

Fixes: 76ad4f0e ("net: hns3: Add support of HNS3 Ethernet Driver for hip08 SoC")
Signed-off-by: Hao Chen <chenhao288@hisilicon.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

An issue found when network interface is down and up again, FPE handshake
fails to trigger. This is due to __FPE_REMOVING bit remains being set in
stmmac_fpe_stop_wq() but not cleared in stmmac_fpe_start_wq(). This
cause FPE workqueue task, stmmac_fpe_lp_task() not able to be executed.

To fix this, add clearing __FPE_REMOVING bit in stmmac_fpe_start_wq().

Fixes: 5a558611 ("net: stmmac: support FPE link partner hand-shaking procedure")
Signed-off-by: Mohammad Athari Bin Ismail <mohammad.athari.ismail@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

ksz_switch_alloc() will return NULL only if allocation is failed. So,
the proper return value is -ENOMEM.

Fixes: 60a36476 ("net: dsa: microchip: Add Microchip KSZ8863 SMI based driver support")
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

Fix possible NULL pointer dereference in case devm_kzalloc() failed to
allocate memory

Fixes: cc13e52c ("net: dsa: microchip: Add Microchip KSZ8863 SPI based driver support")
Reported-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

Fix possible NULL pointer dereference in case devm_kzalloc() failed to
allocate memory.

Fixes: 60a36476 ("net: dsa: microchip: Add Microchip KSZ8863 SMI based driver support")
Reported-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

Variable 'err' is set to -EIO but this value is never read as it is
overwritten with a new value later on, hence it is a redundant
assignment and can be removed.

Clean up the following clang-analyzer warning:
drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c:1195:2: warning: Value
stored to 'err' is never read [clang-analyzer-deadcode.DeadStores]
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Variable queue is set to bp->queues but these values is not used as it
is overwritten later on, hence redundant assignment  can be removed.

Cleans up the following clang-analyzer warning:

drivers/net/ethernet/cadence/macb_main.c:4919:21: warning: Value stored
to 'queue' during its initialization is never read
[clang-analyzer-deadcode.DeadStores].

drivers/net/ethernet/cadence/macb_main.c:4832:21: warning: Value stored
to 'queue' during its initialization is never read
[clang-analyzer-deadcode.DeadStores].
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

His email bounces with permanent error "550 Invalid recipient". His last
email was from 2020-09-09 on the LKML and he seems to have left TI.
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: David S. Miller <davem@davemloft.net>

His email bounces with permanent error "550 Invalid recipient". His last
email on the LKML was from 2015-10-22 on the LKML.
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: David S. Miller <davem@davemloft.net>

Huazhong Tan says:

====================
net: hns3: add some fixes for -net

This series adds some fixes for the HNS3 ethernet driver.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

In some cases, the device is not initialized because reset failed.
If another task calls hns3_reset_notify_up_enet() before reset
retry, it will cause an error since uninitialized pointer access.
So add check for HNS3_NIC_STATE_INITED before calling
hns3_nic_net_open() in hns3_reset_notify_up_enet().

Fixes: bb6b94a8 ("net: hns3: Add reset interface implementation in client")
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The message sent to VF should be initialized, otherwise random
value of some contents may cause improper processing by the target.
So add a initialization to message in hclge_get_link_mode().

Fixes: 9194d18b ("net: hns3: fix the problem that the supported port is empty")
Signed-off-by: Yufeng Mo <moyufeng@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

According to the UM, the type and enable status of igu_egu_hw_err
should be configured separately. Currently, the type field is
incorrect when disable this error. So fix it by configuring these
two fields separately.

Fixes: bf1faf94 ("net: hns3: Add enable and process hw errors from IGU, EGU and NCSI")
Signed-off-by: Yufeng Mo <moyufeng@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Variable 'err' is set to -ENOMEM but this value is never read as it is
overwritten with a new value later on, hence the 'If statements' and
assignments are redundantand and can be removed.

Cleans up the following clang-analyzer warning:

net/ipv6/seg6.c:126:4: warning: Value stored to 'err' is never read
[clang-analyzer-deadcode.DeadStores]
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

There is a crash in the function br_get_link_af_size_filtered,
as the port_exists(dev) is true and the rx_handler_data of dev is NULL.
But the rx_handler_data of dev is correct saved in vmcore.

The oops looks something like:
 ...
 pc : br_get_link_af_size_filtered+0x28/0x1c8 [bridge]
 ...
 Call trace:
  br_get_link_af_size_filtered+0x28/0x1c8 [bridge]
  if_nlmsg_size+0x180/0x1b0
  rtnl_calcit.isra.12+0xf8/0x148
  rtnetlink_rcv_msg+0x334/0x370
  netlink_rcv_skb+0x64/0x130
  rtnetlink_rcv+0x28/0x38
  netlink_unicast+0x1f0/0x250
  netlink_sendmsg+0x310/0x378
  sock_sendmsg+0x4c/0x70
  __sys_sendto+0x120/0x150
  __arm64_sys_sendto+0x30/0x40
  el0_svc_common+0x78/0x130
  el0_svc_handler+0x38/0x78
  el0_svc+0x8/0xc

In br_add_if(), we found there is no guarantee that
assigning rx_handler_data to dev->rx_handler_data
will before setting the IFF_BRIDGE_PORT bit of priv_flags.
So there is a possible data competition:

CPU 0:                                                        CPU 1:
(RCU read lock)                                               (RTNL lock)
rtnl_calcit()                                                 br_add_slave()
  if_nlmsg_size()                                               br_add_if()
    br_get_link_af_size_filtered()                              -> netdev_rx_handler_register
                                                                    ...
                                                                    // The order is not guaranteed
      ...                                                           -> dev->priv_flags |= IFF_BRIDGE_PORT;
      // The IFF_BRIDGE_PORT bit of priv_flags has been set
      -> if (br_port_exists(dev)) {
        // The dev->rx_handler_data has NOT been assigned
        -> p = br_port_get_rcu(dev);
        ....
                                                                    -> rcu_assign_pointer(dev->rx_handler_data, rx_handler_data);
                                                                     ...

Fix it in br_get_link_af_size_filtered, using br_port_get_check_rcu() and checking the return value.
Signed-off-by: Zhang Zhengming <zhangzhengming@huawei.com>
Reviewed-by: Zhao Lei <zhaolei69@huawei.com>
Reviewed-by: Wang Xiaogang <wangxiaogang3@huawei.com>
Suggested-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Davide Caratti says:

====================
fix stack OOB read while fragmenting IPv4 packets

- patch 1/2 fixes openvswitch IPv4 fragmentation, that does a stack OOB
read after commit d52e5a7e ("ipv4: lock mtu in fnhe when received
PMTU < net.ipv4.route.min_pmt")
- patch 2/2 fixes the same issue in TC 'sch_frag' code
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

when 'act_mirred' tries to fragment IPv4 packets that had been previously
re-assembled using 'act_ct', splats like the following can be observed on
kernels built with KASAN:

 BUG: KASAN: stack-out-of-bounds in ip_do_fragment+0x1b03/0x1f60
 Read of size 1 at addr ffff888147009574 by task ping/947

 CPU: 0 PID: 947 Comm: ping Not tainted 5.12.0-rc6+ #418
 Hardware name: Red Hat KVM, BIOS 1.11.1-4.module+el8.1.0+4066+0f1aadab 04/01/2014
 Call Trace:
  <IRQ>
  dump_stack+0x92/0xc1
  print_address_description.constprop.7+0x1a/0x150
  kasan_report.cold.13+0x7f/0x111
  ip_do_fragment+0x1b03/0x1f60
  sch_fragment+0x4bf/0xe40
  tcf_mirred_act+0xc3d/0x11a0 [act_mirred]
  tcf_action_exec+0x104/0x3e0
  fl_classify+0x49a/0x5e0 [cls_flower]
  tcf_classify_ingress+0x18a/0x820
  __netif_receive_skb_core+0xae7/0x3340
  __netif_receive_skb_one_core+0xb6/0x1b0
  process_backlog+0x1ef/0x6c0
  __napi_poll+0xaa/0x500
  net_rx_action+0x702/0xac0
  __do_softirq+0x1e4/0x97f
  do_softirq+0x71/0x90
  </IRQ>
  __local_bh_enable_ip+0xdb/0xf0
  ip_finish_output2+0x760/0x2120
  ip_do_fragment+0x15a5/0x1f60
  __ip_finish_output+0x4c2/0xea0
  ip_output+0x1ca/0x4d0
  ip_send_skb+0x37/0xa0
  raw_sendmsg+0x1c4b/0x2d00
  sock_sendmsg+0xdb/0x110
  __sys_sendto+0x1d7/0x2b0
  __x64_sys_sendto+0xdd/0x1b0
  do_syscall_64+0x33/0x40
  entry_SYSCALL_64_after_hwframe+0x44/0xae
 RIP: 0033:0x7f82e13853eb
 Code: 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 f3 0f 1e fa 48 8d 05 75 42 2c 00 41 89 ca 8b 00 85 c0 75 14 b8 2c 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 75 c3 0f 1f 40 00 41 57 4d 89 c7 41 56 41 89
 RSP: 002b:00007ffe01fad888 EFLAGS: 00000246 ORIG_RAX: 000000000000002c
 RAX: ffffffffffffffda RBX: 00005571aac13700 RCX: 00007f82e13853eb
 RDX: 0000000000002330 RSI: 00005571aac13700 RDI: 0000000000000003
 RBP: 0000000000002330 R08: 00005571aac10500 R09: 0000000000000010
 R10: 0000000000000000 R11: 0000000000000246 R12: 00007ffe01faefb0
 R13: 00007ffe01fad890 R14: 00007ffe01fad980 R15: 00005571aac0f0a0

 The buggy address belongs to the page:
 page:000000001dff2e03 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x147009
 flags: 0x17ffffc0001000(reserved)
 raw: 0017ffffc0001000 ffffea00051c0248 ffffea00051c0248 0000000000000000
 raw: 0000000000000000 0000000000000000 00000001ffffffff 0000000000000000
 page dumped because: kasan: bad access detected

 Memory state around the buggy address:
  ffff888147009400: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  ffff888147009480: f1 f1 f1 f1 04 f2 f2 f2 f2 f2 f2 f2 00 00 00 00
 >ffff888147009500: 00 00 00 00 00 00 00 00 00 00 f2 f2 f2 f2 f2 f2
                                                              ^
  ffff888147009580: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  ffff888147009600: 00 00 00 00 00 00 00 00 00 00 00 00 00 f2 f2 f2

for IPv4 packets, sch_fragment() uses a temporary struct dst_entry. Then,
in the following call graph:

  ip_do_fragment()
    ip_skb_dst_mtu()
      ip_dst_mtu_maybe_forward()
        ip_mtu_locked()

the pointer to struct dst_entry is used as pointer to struct rtable: this
turns the access to struct members like rt_mtu_locked into an OOB read in
the stack. Fix this changing the temporary variable used for IPv4 packets
in sch_fragment(), similarly to what is done for IPv6 few lines below.

Fixes: c129412f ("net/sched: sch_frag: add generic packet fragment support.")
Cc: <stable@vger.kernel.org> # 5.11
Reported-by: Shuang Li <shuali@redhat.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Acked-by: Cong Wang <cong.wang@bytedance.com>
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

running openvswitch on kernels built with KASAN, it's possible to see the
following splat while testing fragmentation of IPv4 packets:

 BUG: KASAN: stack-out-of-bounds in ip_do_fragment+0x1b03/0x1f60
 Read of size 1 at addr ffff888112fc713c by task handler2/1367

 CPU: 0 PID: 1367 Comm: handler2 Not tainted 5.12.0-rc6+ #418
 Hardware name: Red Hat KVM, BIOS 1.11.1-4.module+el8.1.0+4066+0f1aadab 04/01/2014
 Call Trace:
  dump_stack+0x92/0xc1
  print_address_description.constprop.7+0x1a/0x150
  kasan_report.cold.13+0x7f/0x111
  ip_do_fragment+0x1b03/0x1f60
  ovs_fragment+0x5bf/0x840 [openvswitch]
  do_execute_actions+0x1bd5/0x2400 [openvswitch]
  ovs_execute_actions+0xc8/0x3d0 [openvswitch]
  ovs_packet_cmd_execute+0xa39/0x1150 [openvswitch]
  genl_family_rcv_msg_doit.isra.15+0x227/0x2d0
  genl_rcv_msg+0x287/0x490
  netlink_rcv_skb+0x120/0x380
  genl_rcv+0x24/0x40
  netlink_unicast+0x439/0x630
  netlink_sendmsg+0x719/0xbf0
  sock_sendmsg+0xe2/0x110
  ____sys_sendmsg+0x5ba/0x890
  ___sys_sendmsg+0xe9/0x160
  __sys_sendmsg+0xd3/0x170
  do_syscall_64+0x33/0x40
  entry_SYSCALL_64_after_hwframe+0x44/0xae
 RIP: 0033:0x7f957079db07
 Code: c3 66 90 41 54 41 89 d4 55 48 89 f5 53 89 fb 48 83 ec 10 e8 eb ec ff ff 44 89 e2 48 89 ee 89 df 41 89 c0 b8 2e 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 35 44 89 c7 48 89 44 24 08 e8 24 ed ff ff 48
 RSP: 002b:00007f956ce35a50 EFLAGS: 00000293 ORIG_RAX: 000000000000002e
 RAX: ffffffffffffffda RBX: 0000000000000019 RCX: 00007f957079db07
 RDX: 0000000000000000 RSI: 00007f956ce35ae0 RDI: 0000000000000019
 RBP: 00007f956ce35ae0 R08: 0000000000000000 R09: 00007f9558006730
 R10: 0000000000000000 R11: 0000000000000293 R12: 0000000000000000
 R13: 00007f956ce37308 R14: 00007f956ce35f80 R15: 00007f956ce35ae0

 The buggy address belongs to the page:
 page:00000000af2a1d93 refcount:0 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x112fc7
 flags: 0x17ffffc0000000()
 raw: 0017ffffc0000000 0000000000000000 dead000000000122 0000000000000000
 raw: 0000000000000000 0000000000000000 00000000ffffffff 0000000000000000
 page dumped because: kasan: bad access detected

 addr ffff888112fc713c is located in stack of task handler2/1367 at offset 180 in frame:
  ovs_fragment+0x0/0x840 [openvswitch]

 this frame has 2 objects:
  [32, 144) 'ovs_dst'
  [192, 424) 'ovs_rt'

 Memory state around the buggy address:
  ffff888112fc7000: f3 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  ffff888112fc7080: 00 f1 f1 f1 f1 00 00 00 00 00 00 00 00 00 00 00
 >ffff888112fc7100: 00 00 00 f2 f2 f2 f2 f2 f2 00 00 00 00 00 00 00
                                         ^
  ffff888112fc7180: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  ffff888112fc7200: 00 00 00 00 00 00 f2 f2 f2 00 00 00 00 00 00 00

for IPv4 packets, ovs_fragment() uses a temporary struct dst_entry. Then,
in the following call graph:

  ip_do_fragment()
    ip_skb_dst_mtu()
      ip_dst_mtu_maybe_forward()
        ip_mtu_locked()

the pointer to struct dst_entry is used as pointer to struct rtable: this
turns the access to struct members like rt_mtu_locked into an OOB read in
the stack. Fix this changing the temporary variable used for IPv4 packets
in ovs_fragment(), similarly to what is done for IPv6 few lines below.

Fixes: d52e5a7e ("ipv4: lock mtu in fnhe when received PMTU < net.ipv4.route.min_pmt")
Cc: <stable@vger.kernel.org>
Acked-by: Eelco Chaudron <echaudro@redhat.com>
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch provides counters for SRv6 Behaviors as defined in [1],
section 6. For each SRv6 Behavior instance, counters defined in [1] are:

 - the total number of packets that have been correctly processed;
 - the total amount of traffic in bytes of all packets that have been
   correctly processed;

In addition, this patch introduces a new counter that counts the number of
packets that have NOT been properly processed (i.e. errors) by an SRv6
Behavior instance.

Counters are not only interesting for network monitoring purposes (i.e.
counting the number of packets processed by a given behavior) but they also
provide a simple tool for checking whether a behavior instance is working
as we expect or not.
Counters can be useful for troubleshooting misconfigured SRv6 networks.
Indeed, an SRv6 Behavior can silently drop packets for very different
reasons (i.e. wrong SID configuration, interfaces set with SID addresses,
etc) without any notification/message to the user.

Due to the nature of SRv6 networks, diagnostic tools such as ping and
traceroute may be ineffective: paths used for reaching a given router can
be totally different from the ones followed by probe packets. In addition,
paths are often asymmetrical and this makes it even more difficult to keep
up with the journey of the packets and to understand which behaviors are
actually processing our traffic.

When counters are enabled on an SRv6 Behavior instance, it is possible to
verify if packets are actually processed by such behavior and what is the
outcome of the processing. Therefore, the counters for SRv6 Behaviors offer
an non-invasive observability point which can be leveraged for both traffic
monitoring and troubleshooting purposes.

[1] https://www.rfc-editor.org/rfc/rfc8986.html#name-counters

Troubleshooting using SRv6 Behavior counters
--------------------------------------------

Let's make a brief example to see how helpful counters can be for SRv6
networks. Let's consider a node where an SRv6 End Behavior receives an SRv6
packet whose Segment Left (SL) is equal to 0. In this case, the End
Behavior (which accepts only packets with SL >= 1) discards the packet and
increases the error counter.
This information can be leveraged by the network operator for
troubleshooting. Indeed, the error counter is telling the user that the
packet:

  (i) arrived at the node;
 (ii) the packet has been taken into account by the SRv6 End behavior;
(iii) but an error has occurred during the processing.

The error (iii) could be caused by different reasons, such as wrong route
settings on the node or due to an invalid SID List carried by the SRv6
packet. Anyway, the error counter is used to exclude that the packet did
not arrive at the node or it has not been processed by the behavior at
all.

Turning on/off counters for SRv6 Behaviors
------------------------------------------

Each SRv6 Behavior instance can be configured, at the time of its creation,
to make use of counters.
This is done through iproute2 which allows the user to create an SRv6
Behavior instance specifying the optional "count" attribute as shown in the
following example:

 $ ip -6 route add 2001:db8::1 encap seg6local action End count dev eth0

per-behavior counters can be shown by adding "-s" to the iproute2 command
line, i.e.:

 $ ip -s -6 route show 2001:db8::1
 2001:db8::1 encap seg6local action End packets 0 bytes 0 errors 0 dev eth0

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Impact of counters for SRv6 Behaviors on performance
====================================================

To determine the performance impact due to the introduction of counters in
the SRv6 Behavior subsystem, we have carried out extensive tests.

We chose to test the throughput achieved by the SRv6 End.DX2 Behavior
because, among all the other behaviors implemented so far, it reaches the
highest throughput which is around 1.5 Mpps (per core at 2.4 GHz on a
Xeon(R) CPU E5-2630 v3) on kernel 5.12-rc2 using packets of size ~ 100
bytes.

Three different tests were conducted in order to evaluate the overall
throughput of the SRv6 End.DX2 Behavior in the following scenarios:

 1) vanilla kernel (without the SRv6 Behavior counters patch) and a single
    instance of an SRv6 End.DX2 Behavior;
 2) patched kernel with SRv6 Behavior counters and a single instance of
    an SRv6 End.DX2 Behavior with counters turned off;
 3) patched kernel with SRv6 Behavior counters and a single instance of
    SRv6 End.DX2 Behavior with counters turned on.

All tests were performed on a testbed deployed on the CloudLab facilities
[2], a flexible infrastructure dedicated to scientific research on the
future of Cloud Computing.

Results of tests are shown in the following table:

Scenario (1): average 1504764,81 pps (~1504,76 kpps); std. dev 3956,82 pps
Scenario (2): average 1501469,78 pps (~1501,47 kpps); std. dev 2979,85 pps
Scenario (3): average 1501315,13 pps (~1501,32 kpps); std. dev 2956,00 pps

As can be observed, throughputs achieved in scenarios (2),(3) did not
suffer any observable degradation compared to scenario (1).

Thanks to Jakub Kicinski and David Ahern for their valuable suggestions
and comments provided during the discussion of the proposed RFCs.

[2] https://www.cloudlab.usSigned-off-by: Andrea Mayer <andrea.mayer@uniroma2.it>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull networking updates from Jakub Kicinski:
 "Core:

   - bpf:
        - allow bpf programs calling kernel functions (initially to
          reuse TCP congestion control implementations)
        - enable task local storage for tracing programs - remove the
          need to store per-task state in hash maps, and allow tracing
          programs access to task local storage previously added for
          BPF_LSM
        - add bpf_for_each_map_elem() helper, allowing programs to walk
          all map elements in a more robust and easier to verify fashion
        - sockmap: support UDP and cross-protocol BPF_SK_SKB_VERDICT
          redirection
        - lpm: add support for batched ops in LPM trie
        - add BTF_KIND_FLOAT support - mostly to allow use of BTF on
          s390 which has floats in its headers files
        - improve BPF syscall documentation and extend the use of kdoc
          parsing scripts we already employ for bpf-helpers
        - libbpf, bpftool: support static linking of BPF ELF files
        - improve support for encapsulation of L2 packets

   - xdp: restructure redirect actions to avoid a runtime lookup,
     improving performance by 4-8% in microbenchmarks

   - xsk: build skb by page (aka generic zerocopy xmit) - improve
     performance of software AF_XDP path by 33% for devices which don't
     need headers in the linear skb part (e.g. virtio)

   - nexthop: resilient next-hop groups - improve path stability on
     next-hops group changes (incl. offload for mlxsw)

   - ipv6: segment routing: add support for IPv4 decapsulation

   - icmp: add support for RFC 8335 extended PROBE messages

   - inet: use bigger hash table for IP ID generation

   - tcp: deal better with delayed TX completions - make sure we don't
     give up on fast TCP retransmissions only because driver is slow in
     reporting that it completed transmitting the original

   - tcp: reorder tcp_congestion_ops for better cache locality

   - mptcp:
        - add sockopt support for common TCP options
        - add support for common TCP msg flags
        - include multiple address ids in RM_ADDR
        - add reset option support for resetting one subflow

   - udp: GRO L4 improvements - improve 'forward' / 'frag_list'
     co-existence with UDP tunnel GRO, allowing the first to take place
     correctly even for encapsulated UDP traffic

   - micro-optimize dev_gro_receive() and flow dissection, avoid
     retpoline overhead on VLAN and TEB GRO

   - use less memory for sysctls, add a new sysctl type, to allow using
     u8 instead of "int" and "long" and shrink networking sysctls

   - veth: allow GRO without XDP - this allows aggregating UDP packets
     before handing them off to routing, bridge, OvS, etc.

   - allow specifing ifindex when device is moved to another namespace

   - netfilter:
        - nft_socket: add support for cgroupsv2
        - nftables: add catch-all set element - special element used to
          define a default action in case normal lookup missed
        - use net_generic infra in many modules to avoid allocating
          per-ns memory unnecessarily

   - xps: improve the xps handling to avoid potential out-of-bound
     accesses and use-after-free when XPS change race with other
     re-configuration under traffic

   - add a config knob to turn off per-cpu netdev refcnt to catch
     underflows in testing

  Device APIs:

   - add WWAN subsystem to organize the WWAN interfaces better and
     hopefully start driving towards more unified and vendor-
     independent APIs

   - ethtool:
        - add interface for reading IEEE MIB stats (incl. mlx5 and bnxt
          support)
        - allow network drivers to dump arbitrary SFP EEPROM data,
          current offset+length API was a poor fit for modern SFP which
          define EEPROM in terms of pages (incl. mlx5 support)

   - act_police, flow_offload: add support for packet-per-second
     policing (incl. offload for nfp)

   - psample: add additional metadata attributes like transit delay for
     packets sampled from switch HW (and corresponding egress and
     policy-based sampling in the mlxsw driver)

   - dsa: improve support for sandwiched LAGs with bridge and DSA

   - netfilter:
        - flowtable: use direct xmit in topologies with IP forwarding,
          bridging, vlans etc.
        - nftables: counter hardware offload support

   - Bluetooth:
        - improvements for firmware download w/ Intel devices
        - add support for reading AOSP vendor capabilities
        - add support for virtio transport driver

   - mac80211:
        - allow concurrent monitor iface and ethernet rx decap
        - set priority and queue mapping for injected frames

   - phy: add support for Clause-45 PHY Loopback

   - pci/iov: add sysfs MSI-X vector assignment interface to distribute
     MSI-X resources to VFs (incl. mlx5 support)

  New hardware/drivers:

   - dsa: mv88e6xxx: add support for Marvell mv88e6393x - 11-port
     Ethernet switch with 8x 1-Gigabit Ethernet and 3x 10-Gigabit
     interfaces.

   - dsa: support for legacy Broadcom tags used on BCM5325, BCM5365 and
     BCM63xx switches

   - Microchip KSZ8863 and KSZ8873; 3x 10/100Mbps Ethernet switches

   - ath11k: support for QCN9074 a 802.11ax device

   - Bluetooth: Broadcom BCM4330 and BMC4334

   - phy: Marvell 88X2222 transceiver support

   - mdio: add BCM6368 MDIO mux bus controller

   - r8152: support RTL8153 and RTL8156 (USB Ethernet) chips

   - mana: driver for Microsoft Azure Network Adapter (MANA)

   - Actions Semi Owl Ethernet MAC

   - can: driver for ETAS ES58X CAN/USB interfaces

  Pure driver changes:

   - add XDP support to: enetc, igc, stmmac

   - add AF_XDP support to: stmmac

   - virtio:
        - page_to_skb() use build_skb when there's sufficient tailroom
          (21% improvement for 1000B UDP frames)
        - support XDP even without dedicated Tx queues - share the Tx
          queues with the stack when necessary

   - mlx5:
        - flow rules: add support for mirroring with conntrack, matching
          on ICMP, GTP, flex filters and more
        - support packet sampling with flow offloads
        - persist uplink representor netdev across eswitch mode changes
        - allow coexistence of CQE compression and HW time-stamping
        - add ethtool extended link error state reporting

   - ice, iavf: support flow filters, UDP Segmentation Offload

   - dpaa2-switch:
        - move the driver out of staging
        - add spanning tree (STP) support
        - add rx copybreak support
        - add tc flower hardware offload on ingress traffic

   - ionic:
        - implement Rx page reuse
        - support HW PTP time-stamping

   - octeon: support TC hardware offloads - flower matching on ingress
     and egress ratelimitting.

   - stmmac:
        - add RX frame steering based on VLAN priority in tc flower
        - support frame preemption (FPE)
        - intel: add cross time-stamping freq difference adjustment

   - ocelot:
        - support forwarding of MRP frames in HW
        - support multiple bridges
        - support PTP Sync one-step timestamping

   - dsa: mv88e6xxx, dpaa2-switch: offload bridge port flags like
     learning, flooding etc.

   - ipa: add IPA v4.5, v4.9 and v4.11 support (Qualcomm SDX55, SM8350,
     SC7280 SoCs)

   - mt7601u: enable TDLS support

   - mt76:
        - add support for 802.3 rx frames (mt7915/mt7615)
        - mt7915 flash pre-calibration support
        - mt7921/mt7663 runtime power management fixes"

* tag 'net-next-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2451 commits)
  net: selftest: fix build issue if INET is disabled
  net: netrom: nr_in: Remove redundant assignment to ns
  net: tun: Remove redundant assignment to ret
  net: phy: marvell: add downshift support for M88E1240
  net: dsa: ksz: Make reg_mib_cnt a u8 as it never exceeds 255
  net/sched: act_ct: Remove redundant ct get and check
  icmp: standardize naming of RFC 8335 PROBE constants
  bpf, selftests: Update array map tests for per-cpu batched ops
  bpf: Add batched ops support for percpu array
  bpf: Implement formatted output helpers with bstr_printf
  seq_file: Add a seq_bprintf function
  sfc: adjust efx->xdp_tx_queue_count with the real number of initialized queues
  net:nfc:digital: Fix a double free in digital_tg_recv_dep_req
  net: fix a concurrency bug in l2tp_tunnel_register()
  net/smc: Remove redundant assignment to rc
  mpls: Remove redundant assignment to err
  llc2: Remove redundant assignment to rc
  net/tls: Remove redundant initialization of record
  rds: Remove redundant assignment to nr_sig
  dt-bindings: net: mdio-gpio: add compatible for microchip,mdio-smi0
  ...

Pull x86 tlb updates from Ingo Molnar:
 "The x86 MM changes in this cycle were:

   - Implement concurrent TLB flushes, which overlaps the local TLB
     flush with the remote TLB flush.

     In testing this improved sysbench performance measurably by a
     couple of percentage points, especially if TLB-heavy security
     mitigations are active.

   - Further micro-optimizations to improve the performance of TLB
     flushes"

* tag 'x86-mm-2021-04-29' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  smp: Micro-optimize smp_call_function_many_cond()
  smp: Inline on_each_cpu_cond() and on_each_cpu()
  x86/mm/tlb: Remove unnecessary uses of the inline keyword
  cpumask: Mark functions as pure
  x86/mm/tlb: Do not make is_lazy dirty for no reason
  x86/mm/tlb: Privatize cpu_tlbstate
  x86/mm/tlb: Flush remote and local TLBs concurrently
  x86/mm/tlb: Open-code on_each_cpu_cond_mask() for tlb_is_not_lazy()
  x86/mm/tlb: Unify flush_tlb_func_local() and flush_tlb_func_remote()
  smp: Run functions concurrently in smp_call_function_many_cond()

Pull Microblaze updates from Michal Simek:
 "No new features, just about cleaning up some code and moving to
  generic syscall solution used by other architectures:

   - Switch to generic syscall scripts

   - Some small fixes"

* tag 'microblaze-v5.13' of git://git.monstr.eu/linux-2.6-microblaze:
  microblaze: add 'fallthrough' to memcpy/memset/memmove
  microblaze: Fix a typo
  microblaze: tag highmem_setup() with __meminit
  microblaze: syscalls: switch to generic syscallhdr.sh
  microblaze: syscalls: switch to generic syscalltbl.sh

Pull MIPS updates from Thomas Bogendoerfer:

 - removed get_fs/set_fs

 - removed broken/unmaintained MIPS KVM trap and emulate support

 - added support for Loongson-2K1000

 - fixes and cleanups

* tag 'mips_5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: (107 commits)
  MIPS: BCM63XX: Use BUG_ON instead of condition followed by BUG.
  MIPS: select ARCH_KEEP_MEMBLOCK unconditionally
  mips: Do not include hi and lo in clobber list for R6
  MIPS:DTS:Correct the license for Loongson-2K
  MIPS:DTS:Fix label name and interrupt number of ohci for Loongson-2K
  MIPS: Avoid handcoded DIVU in `__div64_32' altogether
  lib/math/test_div64: Correct the spelling of "dividend"
  lib/math/test_div64: Fix error message formatting
  mips/bootinfo:correct some comments of fw_arg
  MIPS: Avoid DIVU in `__div64_32' is result would be zero
  MIPS: Reinstate platform `__div64_32' handler
  div64: Correct inline documentation for `do_div'
  lib/math: Add a `do_div' test module
  MIPS: Makefile: Replace -pg with CC_FLAGS_FTRACE
  MIPS: pci-legacy: revert "use generic pci_enable_resources"
  MIPS: Loongson64: Add kexec/kdump support
  MIPS: pci-legacy: use generic pci_enable_resources
  MIPS: pci-legacy: remove busn_resource field
  MIPS: pci-legacy: remove redundant info messages
  MIPS: pci-legacy: stop using of_pci_range_to_resource
  ...