- 19 Dec, 2004 7 commits
-
-
Andrew Vasquez authored
o Issue a big-hammer to recover if the driver is unable retrieve the host's loop-id. o Correct failure to not add an fc_lun_t object for lun 0. o Interrogate only the relevant bits (peripheral qualifier and device-type) of INQUIRY data. o Correct issue where driver would incorrectly fail-out of initializing an ISP if an device-discovery SNS scan failed. o Correct issue where the qla2x00_fabric_login() would return an incorrect error status during mailbox command execution. Signed-off-by:Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by:
James Bottomley <James.Bottomley@SteelEye.com>
-
Andrew Vasquez authored
Resync with latest NVRAM subsystem ID list. Signed-off-by:
-
Andrew Vasquez authored
Address several NVRAM access issues: o Add support for write-protected NVRAM chips used with ISP2322 and ISP6322. o Correct code to not perform an erase data during NVRAM update. o Correct issuance of NVRAM delay after PCI posting call. Signed-off-by: -
Andrew Vasquez authored
Add support for new transmit/receive sensitivity settings when updating an ISPs serial-link options. Signed-off-by:
-
Andrew Vasquez authored
From: Christoph Hellwig <hch@lst.de> remove dead code, add missing statics Signed-off-by:
-
James Bottomley authored
From: James.Smart@Emulex.Com This patch updates the fc_transport with statistics for local FC ports (e.g. Hosts). The statistics are defined per HBAAPI v2.0 definitions. Caveats: ------------ - The information below is supplied by a simple test driver that does not talk to real hardware, but fully acts as a LLDD that supports the fc transport. This patch results in the following in /sys/class: ----------------------------------------------------- [jsmart@elxware class]$ cd /sys/class [jsmart@elxware class]$ ls fc_host graphics misc pci_bus scsi_host usb_host fc_transport input net scsi_device tty vc firmware mem netlink scsi_generic usb [jsmart@elxware class]$ cd fc_host [jsmart@elxware fc_host]$ ls host4 [jsmart@elxware fc_host]$ cd host4 [jsmart@elxware host4]$ ls device host_link_down_tmo statistics [jsmart@elxware host4]$ ls -ld * lrwxrwxrwx 1 root root 0 Oct 13 17:16 device -> ../../../devices/platform/host4 -rw-r--r-- 1 root root 4096 Oct 13 17:16 host_link_down_tmo drwxr-xr-x 2 root root 0 Oct 13 17:16 statistics [jsmart@elxware host4]$ cd statistics dumped_frames invalid_crc_count prim_seq_protocol_err_count error_frames invalid_tx_word_count reset_statistics fcp_control_requests link_failure_count rx_frames fcp_input_megabytes lip_count rx_words fcp_input_requests loss_of_signal_count seconds_since_last_reset fcp_output_megabytes loss_of_sync_count tx_frames fcp_output_requests nos_count tx_words Signed-off-by: -
James Bottomley authored
From: James.Smart@Emulex.Com This patch adds the basic hooks to the scsi subsystem to support transport-specific statistics to be added to a host. Its basic nature follows the way in which net devices showed their statistics. Signed-off-by:
-
- 11 Dec, 2004 1 commit
-
-
James Bottomley authored
Make it a scsi logging message instead (under ERROR_RECOVERY) Signed-off-by:
-
- 06 Dec, 2004 1 commit
-
-
James Bottomley authored
The last time it was modified was 1997, so add the date range of applicability to its name. Signed-off-by:
-
- 26 Nov, 2004 7 commits
-
-
Adrian Bunk authored
The patch below (applies against both 2.4 and 2.6) removes the bouncing email address of Deanna Bonds (I didn't find a nmore recent address). Signed-off-by:
Adrian Bunk <bunk@stusta.de> Signed-off-by:
-
Adrian Bunk authored
The patch below makes the needlessly global function aic7xxx_info static. Signed-off-by:
-
James Bottomley authored
From: Moore, Eric Dean <Eric.Moore@lsil.com> Here are new PCI ID's for SAS and Fibre Channel LSI Logic controllers. Signed-off-by:
Eric Moore <Eric.Moore@lsil.com> Signed-off-by:
-
James Bottomley authored
OK, so I exported the wrong symbols ... Signed-off-by: -
James Bottomley authored
From: James.Smart@Emulex.Com With rejection fixes around the removal of scsi_syms.c Signed-off-by: -
Jens Axboe authored
Lets show the mid layer as a good example and remove the host lock around the scsi_done() call. Signed-off-by:
Jens Axboe <axboe@suse.de> Signed-off-by:
-
Adrian Bunk authored
The patch below removes scsi_syms.c and moves the EXPORT_SYMBOL's to the files where the actual functions are. Signed-off-by:
-
- 25 Nov, 2004 3 commits
-
-
James Bottomley authored
From: Christoph Hellwig <hch@lst.de> pass pointers to Scsi_Host and the private data around instead of using indices into global arrays all over the place. Signed-off-by: -
Christoph Hellwig authored
the driver oopses on load for me currently, but to debug it I need to actually be able to read the source.. Signed-off-by: -
ssh://linux-scsi@linux-scsi.bkbits.net/scsi-misc-2.6James Bottomley authored
into mulgrave.(none):/home/jejb/BK/scsi-misc-2.6
-
- 23 Nov, 2004 3 commits
-
-
Jesper Juhl authored
Building with gcc -W revealed this warning: arch/i386/kernel/traps.c: In function `do_general_protection': arch/i386/kernel/traps.c:506: warning: empty body in an if-statement upon inspecting the code I see what looks like a mistakenly placed ";" if (!fixup_exception(regs)) { if (notify_die(DIE_GPF, "general protection fault", regs, error_code, 13, SIGSEGV) == NOTIFY_STOP); return; die("general protection fault", regs, error_code); } That ";" after the second if should go away so the return; before die() is not unconditional. Signed-off-by:Jesper Juhl <juhl-lkml@dif.dk> Signed-off-by:
Linus Torvalds <torvalds@osdl.org>
-
Tony Luck authored
Signed-off-by:Tony Luck <tony.luck@intel.com>
-
Tony Luck authored
into intel.com:/data/home/aegl/BK/linux-ia64-release-2.6.10
-
- 22 Nov, 2004 15 commits
-
-
Linus Torvalds authored
Len Brown convinced me that the problem with disabling PCI routing entries wasn't the disable as much as the fact that ELCR needs to be updated when removing the PCI routing. So this reverts the previous cset and updates ELCR as suggested by Len.
-
Bjorn Helgaas authored
Ignore offline CPUs when registering IOSAPIC interrupts. We previously directed interrupts even to offline CPUs, which means that if you have some unused CPUs (e.g., you used "maxcpus="), some interrupts won't work. This really hurts because distro installs typically use "maxcpus=1". Patch by Alex Williamson. Signed-off-by:
Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by:
-
Linus Torvalds authored
This fixes at least some interrupt polarity setup cases. The ACPI guys may want to eventually do this differently, but in the meantime this makes ACPI behaviour closer to non-ACPI behaviour, and fixes known problems. I'll further argue that this protects non-PCI devices that may just share the irq routing from being screwed, but that may or may not be an argument that everybody buys into.
-
Linus Torvalds authored
This depends on the previous ptrace single-step cleanup, and makes sure that signal handling does not lose TF events. This allows debuggers to trace programs that set TF on their own.
-
Linus Torvalds authored
(This makes the naming of "DTRACE" purely historical, since on x86 it now means "single step in progress").
-
Gerd Knorr authored
Update for the tuner module: add support for a new tuner chip. Signed-off-by:
Gerd Knorr <kraxel@bytesex.org> Signed-off-by:
Andrew Morton <akpm@osdl.org> Signed-off-by:
-
Gerd Knorr authored
convert more modules to new-style insmod options. Signed-off-by:
-
Gerd Knorr authored
#ifdef out a currently unused (in-kernel) function, lets see if any out-of-kernel users cry. If not we can drop it altogether later on. Signed-off-by:
-
Gerd Knorr authored
Some places which need adaption to the last video-buf API change where forgotten, this patches fixes them up. Hope I really caught them all now. Signed-off-by:
-
Michael Obster authored
Prevents user-space including spinlock.h which breaks the build. Signed-off-by:
-
Cal Peake authored
Patch below fixes a typo in init/Kconfig for option CC_ALIGN_FUNCTIONS. Signed-off-by:
Cal Peake <cp@absolutedigital.net> Signed-off-by:
-
Russell King authored
The patch below fixes wrong arguments to outw in smc91c92_cs.c Signed-off-by:
Russell King <rmk@arm.linux.org.uk> Signed-off-by:
-
Prasanna Meda authored
Fix the mmput bug introduced while fixing cmdline race. Signed-off-by:
Prasanna Meda <pmeda@akamai.com> Signed-off-by:
-
Tim T. Murphy authored
Here's a patch to include Dell's 4th generation Remote Access Controller ids. Acked-by:
-
Stephen D. Smalley authored
This patch for SELinux fixes a bug in the mapping of socket types to security classes and ensures that Unix seqpacket sockets are mapped to an appropriate security class. The Unix stream security class is re-used in this case as it has the same permission checking applied as for seqpacket. Signed-off-by:
Stephen Smalley <sds@epoch.ncsc.mil> Signed-off-by:
James Morris <jmorris@redhat.com> Signed-off-by:
-
- 21 Nov, 2004 3 commits
-
-
Benjamin Herrenschmidt authored
We just spent some days fighting a rare race in one of the distro's who backported some of timer.c from 2.6 to 2.4 (though they missed a bit). The actual race we found didn't happen in 2.6 _but_ code inspection showed that a similar race is still present in 2.6, explanation below: Code removing a timer from a list (run_timers or del_timer) takes that CPU list lock, does list_del, then timer->base = NULL. It is mandatory that this timer->base = NULL is visible to other CPUs only after the list_del() is complete. If not, then mod timer could see it NULL, thus take it's own CPU list lock and not the one for the CPU the timer was beeing removed from the list, and thus the list_add in mod_timer() could race with the list_del() from run_timers() or del_timer(). Our race happened with run_timers(), which _DOES_ contain a proper smp_wmb() in the right spot in 2.6, but didn't in the "backport" we were fighting with. However, del_timer() doesn't have such a barrier, and thus is subject to this race in 2.6 as well. This patch fixes it. Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by:
-
Benjamin Herrenschmidt authored
The "udbg" code used on ppc64 for early consoles including early serial console recently got a new "default speed" option. This was implemented as a switch case that missed a few important cases, one beeing necessary for a board beeing released soon. This patch fixes it by using the proper division to calculate the dll value for the uart instead of that bogus switch/case. Signed-off-by:
-
Benjamin Herrenschmidt authored
The pci_bus_to_host() inline function used on ppc64 to find the pci_contoller structure a give pci_bus resides on used to contain bogus tree walking code, which fortunately ended up never beeing necessary since "sysdata" always points to a device_node structure that has the proper "phb" field (even if it is not the device-node of the actual P2P, which happens during boot). Signed-off-by:
-
