The XillyUSB driver is the USB variant for the Xillybus FPGA IP core.
Even though it presents a nearly identical API on the FPGA and host,
it's almost a complete rewrite of the driver: The framework for exchanging
data on a USB bus is fundamentally different from doing the same with a
PCIe interface, which leaves very little in common between the existing
driver and the new one for XillyUSB.
Signed-off-by: Eli Billauer <eli.billauer@gmail.com>
Link: https://lore.kernel.org/r/20210526100311.56327-3-eli.billauer@gmail.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch is a preparation for adding another related driver, XillyUSB.
In order to share some code between the existing Xillybus driver and the
one to be added, some functions are moved to xillybus_class.c

XILLYBUS_CLASS is added to Kconfig and is common to all drivers in this
group. The relation with the existing XILLYBUS symbol is "select" rather
than "depends on" XILLYBUS_CLASS, or else "make olddefconfig" will silently
turn off XILLYBUS, which is currently enabled in several distributions.

XILLYBUS_CLASS doesn't depend on anything else, hence using it with
"select" poses no risk for a broken configuration.

After the future addition of the XillyUSB module, the tree of symbols
will be as follows:

XILLYBUS_CLASS --+-- XILLYBUS --+-- XILLYBUS_PCIE
                 |              |
                 |              +-- XILLYBUS_OF
                 |
                 +-- XILLYUSB

XILLYBUS is for drivers based upon memory registers + DMA-based interfaces,
and it's combined with XILLYBUS_PCIE and/or XILLYBUS_OF.

XILLYUSB is for the USB variant only.

Or a more detailed, bottom-up outline:

* CONFIG_XILLYBUS_PCIE -> xillybus_pcie.c: Functions related to PCIe.
* CONFIG_XILLYBUS_OF -> xillybus_of.c: Functions related to Xillybus as a
  peripheral on an FPGA / Processor combo chip.
* CONFIG_XILLYBUS -> xillybus_core.c: Functions that are common to the two
  above, mainly access to the peripheral with memory-mapped registers and
  DMA.
* CONFIG_XILLYUSB -> xillyusb.c: The driver for the USB variant, accesses
  the peripheral through the USB framework.
* CONFIG_XILLYBUS_CLASS -> xillybus_class.c: The new module, which contains
  the class and API parts that would otherwise appear both in
  xillybus_core.c and xillyusb.c. Contains utility functions for the two
  latter.

And since I'm at it, comments on the module names are added in the
Kconfig's help part.

The functions are exported with the non-GPL EXPORT_SYMBOL (a matter of
taste).
Signed-off-by: Eli Billauer <eli.billauer@gmail.com>
Link: https://lore.kernel.org/r/20210526100311.56327-2-eli.billauer@gmail.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit c999fbbd ("w1: ds2438: support for writing to offset
register") added more documentation, but had a one-off line for the
header of a section which caused the build warning:

	Documentation/w1/slaves/w1_ds2438.rst:56: WARNING: Title underline too short.

Resolve this by fixing the underline to be long enough.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Link: https://lore.kernel.org/r/YKthRzCGan9WEcmP@kroah.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The opening comment mark '/**' is used for highlighting the beginning of
kernel-doc comments.
The comments for drivers/w1/masters/ds2482.c follows this syntax, but
the content inside does not comply with kernel-doc.

Similarly, the syntax for function and arguments declaration as well.

Fix all such occurrences appropriately.
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Aditya Srivastava <yashsri421@gmail.com>
Link: https://lore.kernel.org/r/20210523150122.21160-1-yashsri421@gmail.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch fixes a trivial mistake that I made in the previous attempt
in fixing the null bridge issue. The branch condition is inverted and we
should call alcor_pci_find_cap_offset() only if bridge is not null.
Reported-by: Colin Ian King <colin.king@canonical.com>
Fixes: 3ce3e45c ("misc: alcor_pci: fix null-ptr-deref when there is no PCI bridge")
Signed-off-by: Tong Zhang <ztong0001@gmail.com>
Link: https://lore.kernel.org/r/20210522043725.602179-1-ztong0001@gmail.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

container_of() only returns NULL if the passed pointer is NULL _and_ if
the embedded element is the first element of the structure. Even if that
is the case, testing against it is misleading and possibly dangerous
because the position of the embedded element may change. In this case,
the check is unnecessary since it is known that file->private_data is
never NULL for an open file, and container_of() will therefore also
never be NULL. Drop the check.
Acked-by: Dragan Cvetic <dragan.cvetic@xilinx.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20210521200457.2112041-1-linux@roeck-us.netSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Instead of creating/removing the attribute ourselves, just declare the
attribute and let the device core handle it. This allows to simplify
the code.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://lore.kernel.org/r/8a6c77f2-f84a-311b-c2b9-21798f690e4d@gmail.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

New helper BIN_ATTRIBUTE_GROUPS() does the same as ATTRIBUTE_GROUPS(),
just for binary attributes.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://lore.kernel.org/r/e20db248-ed30-cf5d-a37c-b538dceaa5b2@gmail.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

There is a regular need in the kernel to provide a way to declare
having a dynamically sized set of trailing elements in a structure.
Kernel code should always use “flexible array members”[1] for these
cases. The older style of one-element or zero-length arrays should
no longer be used[2].

Also, make use of the struct_size() helper in kzalloc().

[1] https://en.wikipedia.org/wiki/Flexible_array_member
[2] https://www.kernel.org/doc/html/v5.10/process/deprecated.html#zero-length-and-one-element-arraysAcked-by: Scott Branden <scott.branden@broadcom.com>
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Link: https://lore.kernel.org/r/20210514230801.GA35863@embeddedorSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Remove leading spaces before tabs in Kconfig file(s) by running the
following command:

  $ find drivers/uio -name 'Kconfig*' | xargs sed -r -i 's/^[ ]+\t/\t/'
Signed-off-by: Juerg Haefliger <juergh@canonical.com>
Link: https://lore.kernel.org/r/20210517095837.81783-1-juergh@canonical.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Added a sysfs entry to support writing to the offset register on page1.
This register is used to calibrate the chip canceling offset errors in the
current ADC. This means that, over time, reading the IAD register will not
return the correct current measurement, it will have an offset. Writing to
the offset register if the two's complement of the current register while
passing zero current to the load will calibrate the measurements. This
change was tested on real hardware and it was able to calibrate the chip
correctly.
Signed-off-by: Luiz Sampaio <sampaio.ime@gmail.com>
Link: https://lore.kernel.org/r/20210519223046.13798-7-sampaio.ime@gmail.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Added a sysfs entry to support reading the page1 registers. This registers
contain Elapsed Time Meter (ETM) data, which shows for how long the chip is
on, as well as an Offset Register data, which can be used to calibrate the
current measurement of the chip.
Signed-off-by: Luiz Sampaio <sampaio.ime@gmail.com>
Link: https://lore.kernel.org/r/20210519223046.13798-6-sampaio.ime@gmail.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The purpose of the w1_ds2438_get_page function is to get the register
values at the page passed as the pageno parameter. However, the page0 was
hardcoded, such that the function always returned the page0 contents. Fixed
so that the function can retrieve any page.
Signed-off-by: Luiz Sampaio <sampaio.ime@gmail.com>
Link: https://lore.kernel.org/r/20210519223046.13798-5-sampaio.ime@gmail.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The iad sysfs file has permissions for read and write. Changed to the
recommended macro BIN_ATTR_RW.
Signed-off-by: Luiz Sampaio <sampaio.ime@gmail.com>
Link: https://lore.kernel.org/r/20210519223046.13798-4-sampaio.ime@gmail.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Since there is only one statement inside the if clause, no brackets are
required.
Signed-off-by: Luiz Sampaio <sampaio.ime@gmail.com>
Link: https://lore.kernel.org/r/20210519223046.13798-3-sampaio.ime@gmail.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

There is an if statement and, if the function goes into it, it returns. So,
the next else is not required.
Signed-off-by: Luiz Sampaio <sampaio.ime@gmail.com>
Link: https://lore.kernel.org/r/20210519223046.13798-2-sampaio.ime@gmail.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fix the following build warning:

  drivers/w1/slaves/w1_therm.c: In function ‘w1_seq_show’:
  drivers/w1/slaves/w1_therm.c:2059:6: warning: variable ‘rv’ set but not used [-Wunused-but-set-variable]
    int rv;
        ^~
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20210518050415.615783-1-yangyingliang@huawei.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fix the following make W=1 kernel build warning:

  drivers/w1/slaves/w1_therm.c:843: warning: expecting prototype for support_bulk_read(). Prototype was for bulk_read_support() instead
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20210518050401.615648-1-yangyingliang@huawei.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Use string_upper() from string helper module instead of open coded variant.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20210518133458.20403-1-andriy.shevchenko@linux.intel.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fixes the following W=1 kernel build warning(s):

 drivers/staging/comedi/drivers/comedi_isadma.c:157: warning: Function parameter or member 'dma_chan1' not described in 'comedi_isadma_alloc'
 drivers/staging/comedi/drivers/comedi_isadma.c:157: warning: Excess function parameter 'dma_chan' description in 'comedi_isadma_alloc'

Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: linux-staging@lists.linux.dev
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20210520122538.3470259-7-lee.jones@linaro.orgSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fixes the following W=1 kernel build warning(s):

 drivers/staging/comedi/drivers/ni_routes.c:249: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
 drivers/staging/comedi/drivers/ni_routes.c:398: warning: Function parameter or member 'routes' not described in 'ni_route_set_has_source'
 drivers/staging/comedi/drivers/ni_routes.c:398: warning: Function parameter or member 'source' not described in 'ni_route_set_has_source'
 drivers/staging/comedi/drivers/ni_routes.c:524: warning: Function parameter or member 'src_sel_reg_value' not described in 'ni_find_route_source'
 drivers/staging/comedi/drivers/ni_routes.c:524: warning: Function parameter or member 'dest' not described in 'ni_find_route_source'
 drivers/staging/comedi/drivers/ni_routes.c:524: warning: Function parameter or member 'tables' not described in 'ni_find_route_source'

Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: "Alexander A. Klimov" <grandmaster@al2klimov.de>
Cc: "Spencer E. Olson" <olsonse@umich.edu>
Cc: linux-staging@lists.linux.dev
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20210520122538.3470259-5-lee.jones@linaro.orgSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fixes the following W=1 kernel build warning(s):

 drivers/staging/comedi/drivers/ni_tio.c:1515: warning: Function parameter or member 'counter_dev' not described in 'ni_tio_get_routing'
 drivers/staging/comedi/drivers/ni_tio.c:1515: warning: Function parameter or member 'dest' not described in 'ni_tio_get_routing'
 drivers/staging/comedi/drivers/ni_tio.c:1515: warning: expecting prototype for Retrieves the register value of the current source of the output selector for(). Prototype was for ni_tio_get_routing() instead
 drivers/staging/comedi/drivers/ni_tio.c:1544: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
 drivers/staging/comedi/drivers/ni_tio.c:1584: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst

Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Mori Hess <fmhess@users.sourceforge.net>
Cc: "J.P. Mellor" <jpmellor@rose-hulman.edu>
Cc: Herman.Bruyninckx@mech.kuleuven.ac.be
Cc: Wim.Meeussen@mech.kuleuven.ac.be
Cc: Klaas.Gadeyne@mech.kuleuven.ac.be
Cc: Comedi <comedi@comedi.org>
Cc: linux-staging@lists.linux.dev
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20210520122538.3470259-4-lee.jones@linaro.orgSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fixes the following W=1 kernel build warning(s):

 drivers/staging/comedi/drivers/comedi_8254.c:561: warning: Function parameter or member 'i8254' not described in 'comedi_8254_subdevice_init'
 drivers/staging/comedi/drivers/comedi_8254.c:620: warning: Function parameter or member 'iobase' not described in 'comedi_8254_init'
 drivers/staging/comedi/drivers/comedi_8254.c:620: warning: Excess function parameter 'mmio' description in 'comedi_8254_init'

Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: "David A. Schleef" <ds@schleef.org>
Cc: linux-staging@lists.linux.dev
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20210520122538.3470259-2-lee.jones@linaro.orgSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fixes the following W=1 kernel build warning(s):

 drivers/char/hw_random/pseries-rng.c:42: warning: Function parameter or member 'vdev' not described in 'pseries_rng_get_desired_dma'

Cc: Matt Mackall <mpm@selenic.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Lijun Pan <ljp@linux.ibm.com>
Cc: "Uwe Kleine-König" <uwe@kleine-koenig.org>
Cc: Tyrel Datwyler <tyreld@linux.ibm.com>
Cc: Michael Neuling <mikey@neuling.org>
Cc: linux-crypto@vger.kernel.org
Cc: linuxppc-dev@lists.ozlabs.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20210520121347.3467794-16-lee.jones@linaro.orgSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fixes the following W=1 kernel build warning(s):

 drivers/char/hpet.c: In function ‘hpet_interrupt’:
 drivers/char/hpet.c:159:17: warning: variable ‘m’ set but not used [-Wunused-but-set-variable]

Cc: Clemens Ladisch <clemens@ladisch.de>
Cc: Bob Picco <robert.picco@hp.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20210520121347.3467794-13-lee.jones@linaro.orgSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fixes the following W=1 kernel build warning(s):

 drivers/char/pcmcia/cm4040_cs.c: In function ‘cm4040_read’:
 drivers/char/pcmcia/cm4040_cs.c:224:16: warning: variable ‘uc’ set but not used [-Wunused-but-set-variable]

Cc: Harald Welte <laforge@gnumonks.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20210520121347.3467794-3-lee.jones@linaro.orgSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fixes the following W=1 kernel build warning(s):

 drivers/char/pcmcia/cm4000_cs.c: In function ‘cmm_write’:
 drivers/char/pcmcia/cm4000_cs.c:1053:16: warning: variable ‘tmp’ set but not used [-Wunused-but-set-variable]

Cc: Harald Welte <laforge@gnumonks.org>
Cc: "cs.c" <support.linux@omnikey.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20210520121347.3467794-2-lee.jones@linaro.orgSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Merge 50f09a3d ("Merge tag 'char-misc-5.13-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc") into char-misc-next

We want the char/misc driver fixes in here as well
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Pull char/misc driver fixes from Greg KH:
 "Here is a big set of char/misc/other driver fixes for 5.13-rc3.

  The majority here is the fallout of the umn.edu re-review of all prior
  submissions. That resulted in a bunch of reverts along with the
  "correct" changes made, such that there is no regression of any of the
  potential fixes that were made by those individuals. I would like to
  thank the over 80 different developers who helped with the review and
  fixes for this mess.

  Other than that, there's a few habanna driver fixes for reported
  issues, and some dyndbg fixes for reported problems.

  All of these have been in linux-next for a while with no reported
  problems"

* tag 'char-misc-5.13-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (82 commits)
  misc: eeprom: at24: check suspend status before disable regulator
  uio_hv_generic: Fix another memory leak in error handling paths
  uio_hv_generic: Fix a memory leak in error handling paths
  uio/uio_pci_generic: fix return value changed in refactoring
  Revert "Revert "ALSA: usx2y: Fix potential NULL pointer dereference""
  dyndbg: drop uninformative vpr_info
  dyndbg: avoid calling dyndbg_emit_prefix when it has no work
  binder: Return EFAULT if we fail BINDER_ENABLE_ONEWAY_SPAM_DETECTION
  cdrom: gdrom: initialize global variable at init time
  brcmfmac: properly check for bus register errors
  Revert "brcmfmac: add a check for the status of usb_register"
  video: imsttfb: check for ioremap() failures
  Revert "video: imsttfb: fix potential NULL pointer dereferences"
  net: liquidio: Add missing null pointer checks
  Revert "net: liquidio: fix a NULL pointer dereference"
  media: gspca: properly check for errors in po1030_probe()
  Revert "media: gspca: Check the return value of write_bridge for timeout"
  media: gspca: mt9m111: Check write_bridge for timeout
  Revert "media: gspca: mt9m111: Check write_bridge for timeout"
  media: dvb: Add check on sp8870_readreg return
  ...

Pull quota fixes from Jan Kara:
 "The most important part in the pull is disablement of the new syscall
  quotactl_path() which was added in rc1.

  The reason is some people at LWN discussion pointed out dirfd would be
  useful for this path based syscall and Christian Brauner agreed.

  Without dirfd it may be indeed problematic for containers. So let's
  just disable the syscall for now when it doesn't have users yet so
  that we have more time to mull over how to best specify the filesystem
  we want to work on"

* tag 'quota_for_v5.13-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
  quota: Disable quotactl_path syscall
  quota: Use 'hlist_for_each_entry' to simplify code

Merge tag 'fs.idmapped.mount_setattr.v5.13-rc3' of gitolite.kernel.org:pub/scm/linux/kernel/git/brauner/linux

Pull mount_setattr fix from Christian Brauner:
 "This makes an underlying idmapping assumption more explicit.

  We currently don't have any filesystems that support idmapped mounts
  which are mountable inside a user namespace, i.e. where s_user_ns !=
  init_user_ns. That was a deliberate decision for now as userns root
  can just mount the filesystem themselves.

  Express this restriction explicitly and enforce it until there's a
  real use-case for this. This way we can notice it and will have a
  chance to adapt and audit our translation helpers and fstests
  appropriately if we need to support such filesystems"

* tag 'fs.idmapped.mount_setattr.v5.13-rc3' of gitolite.kernel.org:pub/scm/linux/kernel/git/brauner/linux:
  fs/mount_setattr: tighten permission checks

This reverts commit b12d691e.

It turns out this is not ready for primetime yet.  The intentions are
good, but using remap_pfn_range() requires that there is nothing already
mapped in the area, and the i915 code seems to very much intentionally
remap the same area multiple times.

That will then just trigger the

                BUG_ON(!pte_none(*pte));

in mm/memory.c: remap_pte_range().

There are also reports of mapping type inconsistencies, resulting in
warnings and in screen corruption.

Link: https://lore.kernel.org/lkml/20210519024322.GA29704@xsang-OptiPlex-9020/
Link: https://lore.kernel.org/lkml/YKUjvoaKKggAmpIR@sf/
Link: https://lore.kernel.org/lkml/b6b61cf0-5874-f4c0-1fcc-4b3848451c31@redhat.com/Reported-by: kernel test robot <oliver.sang@intel.com>
Reported-by: Kalle Valo <kvalo@codeaurora.org>
Reported-by: Hans de Goede <hdegoede@redhat.com>
Reported-by: Sergei Trofimovich <slyfox@gentoo.org>
Acked-by: Christoph Hellwig <hch@lst.de>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull btrfs fixes from David Sterba:
 "A few more fixes:

   - fix fiemap to print extents that could get misreported due to
     internal extent splitting and logical merging for fiemap output

   - fix RCU stalls during delayed iputs

   - fix removed dentries still existing after log is synced"

* tag 'for-5.13-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
  btrfs: fix removed dentries still existing after log is synced
  btrfs: return whole extents in fiemap
  btrfs: avoid RCU stalls while running delayed iputs
  btrfs: return 0 for dev_extent_hole_check_zoned hole_start in case of error

In commit fa8b9007 ("quota: wire up quotactl_path") we have wired up
new quotactl_path syscall. However some people in LWN discussion have
objected that the path based syscall is missing dirfd and flags argument
which is mostly standard for contemporary path based syscalls. Indeed
they have a point and after a discussion with Christian Brauner and
Sascha Hauer I've decided to disable the syscall for now and update its
API. Since there is no userspace currently using that syscall and it
hasn't been released in any major release, we should be fine.

CC: Christian Brauner <christian.brauner@ubuntu.com>
CC: Sascha Hauer <s.hauer@pengutronix.de>
Link: https://lore.kernel.org/lkml/20210512153621.n5u43jsytbik4yze@wittgensteinSigned-off-by: Jan Kara <jack@suse.cz>

Merge tag 'driver-core-5.13-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

Pull driver core fixes from Greg KH:
 "Here are two driver fixes for driver core changes that happened in
  5.13-rc1.

  The clk driver fix resolves a many-reported issue with booting some
  devices, and the USB typec fix resolves the reported problem of USB
  systems on some embedded boards.

  Both of these have been in linux-next this week with no reported
  issues"

* tag 'driver-core-5.13-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
  clk: Skip clk provider registration when np is NULL
  usb: typec: tcpm: Don't block probing of consumers of "connector" nodes

Pull staging and IIO driver fixes from Greg KH:
 "Here are some small IIO driver fixes and one Staging driver fix for
  5.13-rc2.

  Nothing major, just some resolutions for reported problems:

   - gcc-11 bogus warning fix for rtl8723bs

   - iio driver tiny fixes

  All of these have been in linux-next for many days with no reported
  issues"

* tag 'staging-5.13-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
  iio: tsl2583: Fix division by a zero lux_val
  iio: core: return ENODEV if ioctl is unknown
  iio: core: fix ioctl handlers removal
  iio: gyro: mpu3050: Fix reported temperature value
  iio: hid-sensors: select IIO_TRIGGERED_BUFFER under HID_SENSOR_IIO_TRIGGER
  iio: proximity: pulsedlight: Fix rumtime PM imbalance on error
  iio: light: gp2ap002: Fix rumtime PM imbalance on error
  staging: rtl8723bs: avoid bogus gcc warning

Pull USB fixes from Greg KH:
 "Here are some small USB fixes for 5.13-rc2. They consist of a number
  of resolutions for reported issues:

   - typec fixes for found problems

   - xhci fixes and quirk additions

   - dwc3 driver fixes

   - minor fixes found by Coverity

   - cdc-wdm fixes for reported problems

  All of these have been in linux-next for a few days with no reported
  issues"

* tag 'usb-5.13-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (28 commits)
  usb: core: hub: fix race condition about TRSMRCY of resume
  usb: typec: tcpm: Fix SINK_DISCOVERY current limit for Rp-default
  xhci: Add reset resume quirk for AMD xhci controller.
  usb: xhci: Increase timeout for HC halt
  xhci: Do not use GFP_KERNEL in (potentially) atomic context
  xhci: Fix giving back cancelled URBs even if halted endpoint can't reset
  xhci-pci: Allow host runtime PM as default for Intel Alder Lake xHCI
  usb: musb: Fix an error message
  usb: typec: tcpm: Fix wrong handling for Not_Supported in VDM AMS
  usb: typec: tcpm: Send DISCOVER_IDENTITY from dedicated work
  usb: typec: ucsi: Retrieve all the PDOs instead of just the first 4
  usb: fotg210-hcd: Fix an error message
  docs: usb: function: Modify path name
  usb: dwc3: omap: improve extcon initialization
  usb: typec: ucsi: Put fwnode in any case during ->probe()
  usb: typec: tcpm: Fix wrong handling in GET_SINK_CAP
  usb: dwc2: Remove obsolete MODULE_ constants from platform.c
  usb: dwc3: imx8mp: fix error return code in dwc3_imx8mp_probe()
  usb: dwc3: imx8mp: detect dwc3 core node via compatible string
  usb: dwc3: gadget: Return success always for kick transfer in ep queue
  ...

Pull timer fixes from Thomas Gleixner:
 "Two fixes for timers:

   - Use the ALARM feature check in the alarmtimer core code insted of
     the old method of checking for the set_alarm() callback.

     Drivers can have that callback set but the feature bit cleared. If
     such a RTC device is selected then alarms wont work.

   - Use a proper define to let the preprocessor check whether Hyper-V
     VDSO clocksource should be active.

     The code used a constant in an enum with #ifdef, which evaluates to
     always false and disabled the clocksource for VDSO"

* tag 'timers-urgent-2021-05-16' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  clocksource/drivers/hyper-v: Re-enable VDSO_CLOCKMODE_HVCLOCK on X86
  alarmtimer: Check RTC features instead of ops

Pull xen fixes from Juergen Gross:

 - two patches for error path fixes

 - a small series for fixing a regression with swiotlb with Xen on Arm

* tag 'for-linus-5.13b-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
  xen/swiotlb: check if the swiotlb has already been initialized
  arm64: do not set SWIOTLB_NO_FORCE when swiotlb is required
  xen/arm: move xen_swiotlb_detect to arm/swiotlb-xen.h
  xen/unpopulated-alloc: fix error return code in fill_list()
  xen/gntdev: fix gntdev_mmap() error exit path