- 28 Jul, 2014 30 commits
-
-
Bharat Bhushan authored
Uses kvmppc_set_dar() and kvmppc_get_dar() helper functions Signed-off-by:
Bharat Bhushan <Bharat.Bhushan@freescale.com> Signed-off-by:
Alexander Graf <agraf@suse.de>
-
Bharat Bhushan authored
Use kvmppc_set_srr0/srr1() and kvmppc_get_srr0/srr1() helper functions Signed-off-by:
-
Bharat Bhushan authored
There are shadow registers like, GSPRG[0-3], GSRR0, GSRR1 etc on BOOKE-HV and these shadow registers are guest accessible. So these shadow registers needs to be updated on BOOKE-HV. This patch adds new macro for get/set helper of shadow register . Signed-off-by:
-
Alexander Graf authored
The magic page is defined as a 4k page of per-vCPU data that is shared between the guest and the host to accelerate accesses to privileged registers. However, when the host is using 64k page size granularity we weren't quite as strict about that rule anymore. Instead, we partially treated all of the upper 64k as magic page and mapped only the uppermost 4k with the actual magic contents. This works well enough for Linux which doesn't use any memory in kernel space in the upper 64k, but Mac OS X got upset. So this patch makes magic page actually stay in a 4k range even on 64k page size hosts. This patch fixes magic page usage with Mac OS X (using MOL) on 64k PAGE_SIZE hosts for me. Signed-off-by: -
Alexander Graf authored
Today we handle split real mode by mapping both instruction and data faults into a special virtual address space that only exists during the split mode phase. This is good enough to catch 32bit Linux guests that use split real mode for copy_from/to_user. In this case we're always prefixed with 0xc0000000 for our instruction pointer and can map the user space process freely below there. However, that approach fails when we're running KVM inside of KVM. Here the 1st level last_inst reader may well be in the same virtual page as a 2nd level interrupt handler. It also fails when running Mac OS X guests. Here we have a 4G/4G split, so a kernel copy_from/to_user implementation can easily overlap with user space addresses. The architecturally correct way to fix this would be to implement an instruction interpreter in KVM that kicks in whenever we go into split real mode. This interpreter however would not receive a great amount of testing and be a lot of bloat for a reasonably isolated corner case. So I went back to the drawing board and tried to come up with a way to make split real mode work with a single flat address space. And then I realized that we could get away with the same trick that makes it work for Linux: Whenever we see an instruction address during split real mode that may collide, we just move it higher up the virtual address space to a place that hopefully does not collide (keep your fingers crossed!). That approach does work surprisingly well. I am able to successfully run Mac OS X guests with KVM and QEMU (no split real mode hacks like MOL) when I apply a tiny timing probe hack to QEMU. I'd say this is a win over even more broken split real mode :). Signed-off-by: -
Alexander Graf authored
When a page lookup failed because we're not allowed to write to the page, we should not overwrite that value with another lookup on the second PTEG which will return "page not found". Instead, we should just tell the caller that we had a permission problem. This fixes Mac OS X guests looping endlessly in page lookup code for me. Signed-off-by: -
Alexander Graf authored
When we have a page that we're not allowed to write to, xlate() will already tell us -EPERM on lookup of that page. With the code as is we change it into a "page missing" error which a guest may get confused about. Instead, just tell the caller about the -EPERM directly. This fixes Mac OS X guests when run with DCBZ32 emulation. Signed-off-by: -
Alexander Graf authored
When building KVM with a lot of vcores (NR_CPUS is big), we can potentially get out of the ld immediate range for dereferences inside that struct. Move the array to the end of our kvm_arch struct. This fixes compilation issues with NR_CPUS=2048 for me. Signed-off-by: -
Mihai Caraman authored
For FSL e6500 core the kernel uses power management SPR register (PWRMGTCR0) to enable idle power down for cores and devices by setting up the idle count period at boot time. With the host already controlling the power management configuration the guest could simply benefit from it, so emulate guest request as a general store. Signed-off-by:
Mihai Caraman <mihai.caraman@freescale.com> Signed-off-by:
-
Alexander Graf authored
Now that we've fixed all the issues that HV KVM code had on little endian hosts, we can enable it in the kernel configuration for users to play with. Signed-off-by: -
Alexander Graf authored
For code that doesn't live in modules we can just branch to the real function names, giving us compatibility with ABIv1 and ABIv2. Do this for the compiled-in code of HV KVM. Signed-off-by: -
Alexander Graf authored
On the exit path from the guest we check what type of interrupt we received if we received one. This means we're doing hardware access to the XICS interrupt controller. However, when running on a little endian system, this access is byte reversed. So let's make sure to swizzle the bytes back again and virtually make XICS accesses big endian. Signed-off-by: -
Alexander Graf authored
Some data structures are always stored in big endian. Among those are the LPPACA fields as well as the shadow slb. These structures might be shared with a hypervisor. So whenever we access those fields, make sure we do so in big endian byte order. Signed-off-by: -
Alexander Graf authored
There are a few shared data structures between the host and the guest. Most of them get registered through the VPA interface. These data structures are defined to always be in big endian byte order, so let's make sure we always access them in big endian. Signed-off-by: -
Alexander Graf authored
When running on an LE host all data structures are kept in little endian byte order. However, the HTAB still needs to be maintained in big endian. So every time we access any HTAB we need to make sure we do so in the right byte order. Fix up all accesses to manually byte swap. Signed-off-by: -
Alexander Graf authored
From assembly code we might not only have to explicitly BE access 64bit values, but sometimes also 32bit ones. Add helpers that allow for easy use of lwzx/stwx in their respective byte-reverse or native form. Signed-off-by: -
Mihai Caraman authored
Tlb search operation used for victim hint relies on the default tlb set by the host. When hardware tablewalk support is enabled in the host, the default tlb is TLB1 which leads KVM to evict the bolted entry. Set and restore the default tlb when searching for victim hint. Signed-off-by:
Scott Wood <scottwood@freescale.com> Signed-off-by:
-
Michael Neuling authored
This adds support for the H_SET_MODE hcall. This hcall is a multiplexer that has several functions, some of which are called rarely, and some which are potentially called very frequently. Here we add support for the functions that set the debug registers CIABR (Completed Instruction Address Breakpoint Register) and DAWR/DAWRX (Data Address Watchpoint Register and eXtension), since they could be updated by the guest as often as every context switch. This also adds a kvmppc_power8_compatible() function to test to see if a guest is compatible with POWER8 or not. The CIABR and DAWR/X only exist on POWER8. Signed-off-by:
Michael Neuling <mikey@neuling.org> Signed-off-by:
Paul Mackerras <paulus@samba.org> Signed-off-by:
-
Paul Mackerras authored
This adds code to check that when the KVM_CAP_PPC_ENABLE_HCALL capability is used to enable or disable in-kernel handling of an hcall, that the hcall is actually implemented by the kernel. If not an EINVAL error is returned. This also checks the default-enabled list of hcalls and prints a warning if any hcall there is not actually implemented. Signed-off-by:
-
Paul Mackerras authored
This provides a way for userspace controls which sPAPR hcalls get handled in the kernel. Each hcall can be individually enabled or disabled for in-kernel handling, except for H_RTAS. The exception for H_RTAS is because userspace can already control whether individual RTAS functions are handled in-kernel or not via the KVM_PPC_RTAS_DEFINE_TOKEN ioctl, and because the numeric value for H_RTAS is out of the normal sequence of hcall numbers. Hcalls are enabled or disabled using the KVM_ENABLE_CAP ioctl for the KVM_CAP_PPC_ENABLE_HCALL capability on the file descriptor for the VM. The args field of the struct kvm_enable_cap specifies the hcall number in args[0] and the enable/disable flag in args[1]; 0 means disable in-kernel handling (so that the hcall will always cause an exit to userspace) and 1 means enable. Enabling or disabling in-kernel handling of an hcall is effective across the whole VM. The ability for KVM_ENABLE_CAP to be used on a VM file descriptor on PowerPC is new, added by this commit. The KVM_CAP_ENABLE_CAP_VM capability advertises that this ability exists. When a VM is created, an initial set of hcalls are enabled for in-kernel handling. The set that is enabled is the set that have an in-kernel implementation at this point. Any new hcall implementations from this point onwards should not be added to the default set without a good reason. No distinction is made between real-mode and virtual-mode hcall implementations; the one setting controls them both. Signed-off-by:
-
Mihai Caraman authored
On vcpu schedule, the condition checked for tlb pollution is too loose. The tlb entries of a vcpu become polluted (vs stale) only when a different vcpu within the same logical partition runs in-between. Optimize the tlb invalidation condition keeping last_vcpu per logical partition id. With the new invalidation condition, a guest shows 4% performance improvement on P5020DS while running a memory stress application with the cpu oversubscribed, the other guest running a cpu intensive workload. Guest - old invalidation condition real 3.89 user 3.87 sys 0.01 Guest - enhanced invalidation condition real 3.75 user 3.73 sys 0.01 Host real 3.70 user 1.85 sys 0.00 The memory stress application accesses 4KB pages backed by 75% of available TLB0 entries: char foo[ENTRIES][4096] __attribute__ ((aligned (4096))); int main() { char bar; int i, j; for (i = 0; i < ITERATIONS; i++) for (j = 0; j < ENTRIES; j++) bar = foo[j][0]; return 0; } Signed-off-by: -
Alexander Graf authored
While sending sparse with endian checks over the code base, it triggered at some places that were missing casts or had wrong types. Fix them up. Signed-off-by: -
Alexander Graf authored
We switched to ABIv2 on Little Endian systems now which gets rid of the dotted function names. Branch to the actual functions when we see such a system. Signed-off-by: -
Anton Blanchard authored
Both kvmppc_hv_entry_trampoline and kvmppc_entry_trampoline are assembly functions that are exported to modules and also require a valid r2. As such we need to use _GLOBAL_TOC so we provide a global entry point that establishes the TOC (r2). Signed-off-by:
Anton Blanchard <anton@samba.org> Signed-off-by:
-
Anton Blanchard authored
To establish addressability quickly, ABIv2 requires the target address of the function being called to be in r12. Signed-off-by:
-
Alexander Graf authored
If we're running PR KVM in HV mode, we may get hypervisor doorbell interrupts. Handle those the same way we treat normal doorbells. Signed-off-by: -
Alexander Graf authored
Some compilers complain about uninitialized variables in the compute_tlbie_rb function. When you follow the code path you'll realize that we'll never get to that point, but the compiler isn't all that smart. So just default to 4k page sizes for everything, making the compiler happy and the code slightly easier to read. Signed-off-by:
-
Alexander Graf authored
When we're using PR KVM we must not allow the CPU to take interrupts in virtual mode, as the SLB does not contain host kernel mappings when running inside the guest context. To make sure we get good performance for non-KVM tasks but still properly functioning PR KVM, let's just disable AIL whenever a vcpu is scheduled in. This is fundamentally different from how we deal with AIL on pSeries type machines where we disable AIL for the whole machine as soon as a single KVM VM is up. The reason for that is easy - on pSeries we do not have control over per-cpu configuration of AIL. We also don't want to mess with CPU hotplug races and AIL configuration, so setting it per CPU is easier and more flexible. This patch fixes running PR KVM on POWER8 bare metal for me. Signed-off-by:
-
Aneesh Kumar K.V authored
Writing to IC is not allowed in the privileged mode. Signed-off-by:
Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by:
-
Aneesh Kumar K.V authored
virtual time base register is a per VM, per cpu register that needs to be saved and restored on vm exit and entry. Writing to VTB is not allowed in the privileged mode. Signed-off-by:
-
- 06 Jul, 2014 1 commit
-
-
Aneesh Kumar K.V authored
We use time base for PURR and SPURR emulation with PR KVM since we are emulating a single threaded core. When using time base we need to make sure that we don't accumulate time spent in the host in PURR and SPURR value. Also we don't need to emulate mtspr because both the registers are hypervisor resource. Signed-off-by:
-
- 30 Jun, 2014 9 commits
-
-
Rickard Strandqvist authored
A struct member variable is set to the same value more than once This was found using a static code analysis program called cppcheck. Signed-off-by:
Rickard Strandqvist <rickard_strandqvist@spectrumdigital.se> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
Deng-Cheng Zhu authored
It's impossible to fall into the error handling of the TLB index after being masked by (KVM_MIPS_GUEST_TLB_SIZE - 1). Remove the dead code. Reported-by:
James Hogan <james.hogan@imgtec.com> Signed-off-by:
Deng-Cheng Zhu <dengcheng.zhu@imgtec.com> Reviewed-by:
-
Deng-Cheng Zhu authored
The commpage is allocated using kzalloc(), so there's no need of cleaning the memory of the kvm_mips_commpage struct and its internal mips_coproc. Reviewed-by:
-
Deng-Cheng Zhu authored
Since all the files are in arch/mips/kvm/, there's no need of the prefixes "kvm_" and "kvm_mips_". Reviewed-by:
-
Deng-Cheng Zhu authored
The keyword volatile for idx in the TLB functions is unnecessary. Reviewed-by:
-
Deng-Cheng Zhu authored
No logic changes inside. Reviewed-by:
-
Deng-Cheng Zhu authored
Replace printks with kvm_[err|info|debug]. Signed-off-by:
-
Deng-Cheng Zhu authored
No logic changes inside. Signed-off-by:
-
Paolo Bonzini authored
Merge tag 'kvms390-20140626' of git://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into HEAD Fix sie.h header related problems introduced during the 3.16 development cycle.
-
