- 24 Apr, 2018 40 commits
-
-
Thiago Jung Bauermann authored
commit bf8a1abc upstream. kexec_file_load() on powerpc doesn't support kdump kernels yet, so it returns -ENOTSUPP in that case. I've recently learned that this errno is internal to the kernel and isn't supposed to be exposed to userspace. Therefore, change to -EOPNOTSUPP which is defined in an uapi header. This does indeed make kexec-tools happier. Before the patch, on ppc64le: # ~bauermann/src/kexec-tools/build/sbin/kexec -s -p /boot/vmlinuz kexec_file_load failed: Unknown error 524 After the patch: # ~bauermann/src/kexec-tools/build/sbin/kexec -s -p /boot/vmlinuz kexec_file_load failed: Operation not supported Fixes: a0458284 ("powerpc: Add support code for kexec_file_load()") Cc: stable@vger.kernel.org # v4.10+ Reported-by:
Dave Young <dyoung@redhat.com> Signed-off-by:
Thiago Jung Bauermann <bauerman@linux.vnet.ibm.com> Reviewed-by:
Simon Horman <horms@verge.net.au> Reviewed-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Naveen N. Rao authored
commit e6e133c4 upstream. Michael Ellerman reported the following call trace when running ftracetest: BUG: using __this_cpu_write() in preemptible [00000000] code: ftracetest/6178 caller is opt_pre_handler+0xc4/0x110 CPU: 1 PID: 6178 Comm: ftracetest Not tainted 4.15.0-rc7-gcc6x-gb2cd1df6 #1 Call Trace: [c0000000f9ec39c0] [c000000000ac4304] dump_stack+0xb4/0x100 (unreliable) [c0000000f9ec3a00] [c00000000061159c] check_preemption_disabled+0x15c/0x170 [c0000000f9ec3a90] [c000000000217e84] opt_pre_handler+0xc4/0x110 [c0000000f9ec3af0] [c00000000004cf68] optimized_callback+0x148/0x170 [c0000000f9ec3b40] [c00000000004d954] optinsn_slot+0xec/0x10000 [c0000000f9ec3e30] [c00000000004bae0] kretprobe_trampoline+0x0/0x10 This is showing up since OPTPROBES is now enabled with CONFIG_PREEMPT. trampoline_probe_handler() considers itself to be a special kprobe handler for kretprobes. In doing so, it expects to be called from kprobe_handler() on a trap, and re-enables preemption before returning a non-zero return value so as to suppress any subsequent processing of the trap by the kprobe_handler(). However, with optprobes, we don't deal with special handlers (we ignore the return code) and just try to re-enable preemption causing the above trace. To address this, modify trampoline_probe_handler() to not be special. The only additional processing done in kprobe_handler() is to emulate the instruction (in this case, a 'nop'). We adjust the value of regs->nip for the purpose and delegate the job of re-enabling preemption and resetting current kprobe to the probe handlers (kprobe_handler() or optimized_callback()). Fixes: 8a2d71a3 ("powerpc/kprobes: Disable preemption before invoking probe handler for optprobes") Cc: stable@vger.kernel.org # v4.15+ Reported-by:
Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Acked-by:
Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com> Signed-off-by:
-
Nicholas Piggin authored
commit 0bfdf598 upstream. asm/barrier.h is not always included after asm/synch.h, which meant it was missing __SUBARCH_HAS_LWSYNC, so in some files smp_wmb() would be eieio when it should be lwsync. kernel/time/hrtimer.c is one case. __SUBARCH_HAS_LWSYNC is only used in one place, so just fold it in to where it's used. Previously with my small simulator config, 377 instances of eieio in the tree. After this patch there are 55. Fixes: 46d075be ("powerpc: Optimise smp_wmb") Cc: stable@vger.kernel.org # v2.6.29+ Signed-off-by:
Nicholas Piggin <npiggin@gmail.com> Signed-off-by:
-
Paul Mackerras authored
commit dbfcf3cb upstream. On POWER9, since commit cc3d2940 ("powerpc/64: Enable use of radix MMU under hypervisor on POWER9", 2017-01-30), we set both the radix and HPT bits in the client-architecture-support (CAS) vector, which tells the hypervisor that we can do either radix or HPT. According to PAPR, if we use this combination we are promising to do a H_REGISTER_PROC_TBL hcall later on to let the hypervisor know whether we are doing radix or HPT. We currently do this call if we are doing radix but not if we are doing HPT. If the hypervisor is able to support both radix and HPT guests, it would be entitled to defer allocation of the HPT until the H_REGISTER_PROC_TBL call, and to fail any attempts to create HPTEs until the H_REGISTER_PROC_TBL call. Thus we need to do a H_REGISTER_PROC_TBL call when we are doing HPT; otherwise we may crash at boot time. This adds the code to call H_REGISTER_PROC_TBL in this case, before we attempt to create any HPT entries using H_ENTER. Fixes: cc3d2940 ("powerpc/64: Enable use of radix MMU under hypervisor on POWER9") Cc: stable@vger.kernel.org # v4.11+ Signed-off-by:
Paul Mackerras <paulus@ozlabs.org> Reviewed-by:
Suraj Jitindar Singh <sjitindarsingh@gmail.com> Signed-off-by:
-
Nicholas Piggin authored
commit a57ac411 upstream. Presently the dt_cpu_ftrs restore_cpu will only add bits to the LPCR for secondaries, but some bits must be removed (e.g., UPRT for HPT). Not clearing these bits on secondaries causes checkstops when booting with disable_radix. restore_cpu can not just set LPCR, because it is also called by the idle wakeup code which relies on opal_slw_set_reg to restore the value of LPCR, at least on P8 which does not save LPCR to stack in the idle code. Fix this by including a mask of bits to clear from LPCR as well, which is used by restore_cpu. This is a little messy now, but it's a minimal fix that can be backported. Longer term, the idle SPR save/restore code can be reworked to completely avoid calls to restore_cpu, then restore_cpu would be able to unconditionally set LPCR to match boot processor environment. Fixes: 5a61ef74 ("powerpc/64s: Support new device tree binding for discovering CPU features") Cc: stable@vger.kernel.org # v4.12+ Signed-off-by:
-
Nicholas Piggin authored
commit 741de617 upstream. opal_nvram_write currently just assumes success if it encounters an error other than OPAL_BUSY or OPAL_BUSY_EVENT. Have it return -EIO on other errors instead. Fixes: 628daa8d ("powerpc/powernv: Add RTC and NVRAM support plus RTAS fallbacks") Cc: stable@vger.kernel.org # v3.2+ Signed-off-by:
Vasant Hegde <hegdevasant@linux.vnet.ibm.com> Acked-by:
Stewart Smith <stewart@linux.ibm.com> Signed-off-by:
-
Gustavo A. R. Silva authored
commit 70e80655 upstream. It seems this is a copy-paste error and that the proper variable to use in this particular case is _sha512_ instead of _md5_. Addresses-Coverity-ID: 1465358 ("Copy-paste error") Fixes: 1c6614d229e7 ("CIFS: add sha512 secmech") Signed-off-by:
Gustavo A. R. Silva <gustavo@embeddedor.com> Reviewed-by:
Aurelien Aptel <aaptel@suse.com> CC: Stable <stable@vger.kernel.org> Signed-off-by:
Steve French <smfrench@gmail.com> Signed-off-by:
-
Aurelien Aptel authored
commit 5fcd7f3f upstream. * prepare for SMB3.11 pre-auth integrity * enable sha512 when SMB311 is enabled in Kconfig * add sha512 as a soft dependency Signed-off-by:
Ronnie Sahlberg <lsahlber@redhat.com> Signed-off-by:
-
Aurelien Aptel authored
commit 82fb82be upstream. shash and sdesc and always allocated and freed together. * abstract this in new functions cifs_alloc_hash() and cifs_free_hash(). * make smb2/3 crypto allocation independent from each other. Signed-off-by:
-
Jean Delvare authored
commit f7f6d915 upstream. On some systems, the BIOS expects certain SMBus register values to match the hardware defaults. Restore these configuration registers at shutdown time to avoid confusing the BIOS. This avoids hard-locking such systems upon reboot. Signed-off-by:
Jean Delvare <jdelvare@suse.de> Tested-by:
Jason Andryuk <jandryuk@gmail.com> Signed-off-by:
Wolfram Sang <wsa@the-dreams.de> Cc: stable@vger.kernel.org Signed-off-by:
-
Jean Delvare authored
commit a086bb83 upstream. Saving the original value of register SMBSLVCMD in i801_enable_host_notify() doesn't work, because this function is called not only at probe time but also at resume time. Do it in i801_probe() instead, so that the saved value is not overwritten at resume time. Signed-off-by:
Benjamin Tissoires <benjamin.tissoires@redhat.com> Tested-by:
-
Aaron Ma authored
commit ac75a041 upstream. When convert char array with signed int, if the inbuf[x] is negative then upper bits will be set to 1. Fix this by using u8 instead of char. ret_size has to be at least 3, hid_input_report use it after minus 2 bytes. Cc: stable@vger.kernel.org Signed-off-by:
Aaron Ma <aaron.ma@canonical.com> Signed-off-by:
Jiri Kosina <jkosina@suse.cz> Signed-off-by:
-
Steve French authored
commit 7ea884c7 upstream. Some servers return inode number zero for the root directory, which causes ls to display incorrect data (missing "." and ".."). If the server returns zero for the inode number of the root directory, fake an inode number for it. Signed-off-by:
Pavel Shilovsky <pshilov@microsoft.com> CC: Stable <stable@vger.kernel.org> Signed-off-by:
-
Ronnie Sahlberg authored
commit 262916bc upstream. We can not use the standard sg_set_buf() fucntion since when CONFIG_DEBUG_SG=y this adds a check that will BUG_ON for cifs.ko when we pass it an object from the stack. Create a new wrapper smb2_sg_set_buf() which avoids doing that particular check and use it for smb3 encryption instead. Signed-off-by:
-
Ronnie Sahlberg authored
commit b7a73c84 upstream. Signed-off-by:
-
Felipe Balbi authored
commit c91815b5 upstream. This is a requirement which has always existed but, somehow, wasn't reflected in the documentation and problems weren't found until now when Tuba Yavuz found a possible deadlock happening between dwc3 and f_hid. She described the situation as follows: spin_lock_irqsave(&hidg->write_spinlock, flags); // first acquire /* we our function has been disabled by host */ if (!hidg->req) { free_ep_req(hidg->in_ep, hidg->req); goto try_again; } [...] status = usb_ep_queue(hidg->in_ep, hidg->req, GFP_ATOMIC); => [...] => usb_gadget_giveback_request => f_hidg_req_complete => spin_lock_irqsave(&hidg->write_spinlock, flags); // second acquire Note that this happens because dwc3 would call ->complete() on a failed usb_ep_queue() due to failed Start Transfer command. This is, anyway, a theoretical situation because dwc3 currently uses "No Response Update Transfer" command for Bulk and Interrupt endpoints. It's still good to make this case impossible to happen even if the "No Reponse Update Transfer" command is changed. Reported-by:
Tuba Yavuz <tuba@ece.ufl.edu> Signed-off-by:
Felipe Balbi <felipe.balbi@linux.intel.com> Cc: stable <stable@vger.kernel.org> Signed-off-by:
-
Thinh Nguyen authored
commit cabdf83d upstream. Platform device is allocated before adding resources. Make sure to properly cleanup on error case. Cc: <stable@vger.kernel.org> Fixes: f1c7e710 ("usb: dwc3: convert to pcim_enable_device()") Signed-off-by:
Thinh Nguyen <thinhn@synopsys.com> Signed-off-by:
-
Roger Quadros authored
commit daaecc65 upstream. We don't support PRTCAP == OTG yet, so prevent user from setting it via debugfs. Fixes: 41ce1456 ("usb: dwc3: core: make dwc3_set_mode() work properly") Cc: <stable@vger.kernel.org> # v4.12+ Signed-off-by:
Roger Quadros <rogerq@ti.com> Signed-off-by:
-
Zhengjun Xing authored
commit 64627388 upstream. USB3 hubs don't support global suspend. USB3 specification 10.10, Enhanced SuperSpeed hubs only support selective suspend and resume, they do not support global suspend/resume where the hub downstream facing ports states are not affected. When system enters hibernation it first enters freeze process where only the root hub enters suspend, usb_port_suspend() is not called for other devices, and suspend status flags are not set for them. Other devices are expected to suspend globally. Some external USB3 hubs will suspend the downstream facing port at global suspend. These devices won't be resumed at thaw as the suspend status flag is not set. A USB3 removable hard disk connected through a USB3 hub that won't resume at thaw will fail to synchronize SCSI cache, return “cmd cmplt err -71” error, and needs a 60 seconds timeout which causing system hang for 60s before the USB host reset the port for the USB3 removable hard disk to recover. Fix this by always calling usb_port_suspend() during freeze for USB3 devices. Signed-off-by:
Zhengjun Xing <zhengjun.xing@linux.intel.com> Cc: stable <stable@vger.kernel.org> Signed-off-by:
-
Yavuz, Tuba authored
commit 7fafcfdf upstream. It looks like there is a possibility of a double-free vulnerability on an error path of the f_midi_set_alt function in the f_midi driver. If the path is feasible then free_ep_req gets called twice: req->complete = f_midi_complete; err = usb_ep_queue(midi->out_ep, req, GFP_ATOMIC); => ... usb_gadget_giveback_request => f_midi_complete (CALLBACK) (inside f_midi_complete, for various cases of status) free_ep_req(ep, req); // first kfree if (err) { ERROR(midi, "%s: couldn't enqueue request: %d\n", midi->out_ep->name, err); free_ep_req(midi->out_ep, req); // second kfree return err; } The double-free possibility was introduced with commit ad0d1a05 ("usb: gadget: f_midi: fix leak on failed to enqueue out requests"). Found by MOXCAFE tool. Signed-off-by:
-
Mika Westerberg authored
commit 13d3047c upstream. Mike Lothian reported that plugging in a USB-C device does not work properly in his Dell Alienware system. This system has an Intel Alpine Ridge Thunderbolt controller providing USB-C functionality. In these systems the USB controller (xHCI) is hotplugged whenever a device is connected to the port using ACPI-based hotplug. The ACPI description of the root port in question is as follows: Device (RP01) { Name (_ADR, 0x001C0000) Device (PXSX) { Name (_ADR, 0x02) Method (_RMV, 0, NotSerialized) { // ... } } Here _ADR 0x02 means device 0, function 2 on the bus under root port (RP01) but that seems to be incorrect because device 0 is the upstream port of the Alpine Ridge PCIe switch and it has no functions other than 0 (the bridge itself). When we get ACPI Notify() to the root port resulting from connecting a USB-C device, Linux tries to read PCI_VENDOR_ID from device 0, function 2 which of course always returns 0xffffffff because there is no such function and we never find the device. In Windows this works fine. Now, since we get ACPI Notify() to the root port and not to the PXSX device we should actually start our scan from there as well and not from the non-existent PXSX device. Fix this by checking presence of the slot itself (function 0) if we fail to do that otherwise. While there use pci_bus_read_dev_vendor_id() in get_slot_status(), which is the recommended way to read Device and Vendor IDs of devices on PCI buses. Link: https://bugzilla.kernel.org/show_bug.cgi?id=198557Reported-by:
Mike Lothian <mike@fireburn.co.uk> Signed-off-by:
Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by:
Bjorn Helgaas <bhelgaas@google.com> Reviewed-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: stable@vger.kernel.org Signed-off-by:
-
Hans de Goede authored
commit bbf03861 upstream. Just like many other Samsung models, the 670Z5E needs to use the acpi-video backlight interface rather then the native one for backlight control to work, add a quirk for this. Buglink: https://bugzilla.redhat.com/show_bug.cgi?id=1557060 Cc: All applicable <stable@vger.kernel.org> Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
-
Dan Carpenter authored
commit f00e7109 upstream. We're supposed to be checking that "val_len" is not too large but instead we check if it is smaller than the max. The only function affected would be regmap_i2c_smbus_i2c_write() in drivers/base/regmap/regmap-i2c.c. Strangely that function has its own limit check which returns an error if (count >= I2C_SMBUS_BLOCK_MAX) so it doesn't look like it has ever been able to do anything except return an error. Fixes: c335931e ("regmap: Add raw_write/read checks for max_raw_write/read sizes") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Mark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org Signed-off-by:
-
Jason Andryuk authored
commit c2d2e673 upstream. A toolstack may delete the vif frontend and backend xenstore entries while xen-netfront is in the removal code path. In that case, the checks for xenbus_read_driver_state would return XenbusStateUnknown, and xennet_remove would hang indefinitely. This hang prevents system shutdown. xennet_remove must be able to handle XenbusStateUnknown, and netback_changed must also wake up the wake_queue for that state as well. Fixes: 5b5971df ("xen-netfront: remove warning when unloading module") Signed-off-by:
Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by:
Juergen Gross <jgross@suse.com> Signed-off-by:
-
Jason Andryuk authored
commit 36104cb9 upstream. Commit 2cc42bac ("x86-64/Xen: eliminate W+X mappings") introduced a call to get_cpu_cap, which is fstack-protected. This is works on x86-64 as commit 4f277295 ("x86/xen: init %gs very early to avoid page faults with stack protector") ensures the stack protector is configured, but it it did not cover x86-32. Delay calling get_cpu_cap until after xen_setup_gdt has initialized the stack canary. Without this, a 32bit PV machine crashes early in boot. (XEN) Domain 0 (vcpu#0) crashed on cpu#0: (XEN) ----[ Xen-4.6.6-xc x86_64 debug=n Tainted: C ]---- (XEN) CPU: 0 (XEN) RIP: e019:[<00000000c10362f8>] And the PV kernel IP corresponds to init_scattered_cpuid_features 0xc10362f8 <+24>: mov %gs:0x14,%eax Fixes 2cc42bac ("x86-64/Xen: eliminate W+X mappings") Signed-off-by:
-
Kieran Bingham authored
commit 639fa43d upstream. When a BRx is provided by a pipeline, the WPF must determine the master layer. Currently the condition to check this identifies pipe->bru || pipe->num_inputs > 1. The code then moves on to dereference pipe->bru, thus the check fails static analysers on the possibility that pipe->num_inputs could be greater than 1 without pipe->bru being set. The reality is that the pipeline must have a BRx to support more than one input, thus this could never cause a fault - however it also identifies that the num_inputs > 1 check is redundant. Remove the redundant check - and always configure the master layer appropriately when we have a BRx configured in our pipeline. Fixes: 6134148f ("v4l: vsp1: Add support for the BRS entity") Cc: stable@vger.kernel.org Suggested-by:
Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by:
Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Reviewed-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
-
Hans Verkuil authored
commit ed356f11 upstream. If CEC is not enabled for the vivid driver, then the adap pointer is NULL and 'adap->phys_addr' will fail. Cc: <stable@vger.kernel.org> # for v4.12 and up Signed-off-by:
Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by:
-
Hans Verkuil authored
commit 57e6b6f2 upstream. The atomisp_compat_ioctl32() code has problems. This patch disables the compat_ioctl32 support until those issues have been fixed. Contact Sakari or me for more details. Signed-off-by:
Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by:
-
Jarkko Nikula authored
commit 613bd1ea upstream. Commit 9b61e302 (spi: Pick spi bus number from Linux idr or spi alias) ceased to unregister SPI buses with fixed bus numbers. Moreover this is visible only if CONFIG_SPI_DEBUG=y is set or when trying to re-register the same SPI controller. rmmod spi_pxa2xx_platform (with CONFIG_SPI_DEBUG=y): [ 26.788362] spi_master spi1: attempting to delete unregistered controller [spi1] modprobe spi_pxa2xx_platform: [ 37.883137] sysfs: cannot create duplicate filename '/devices/pci0000:00/0000:00:19.0/pxa2xx-spi.12/spi_master/spi1' [ 37.894984] CPU: 1 PID: 1467 Comm: modprobe Not tainted 4.16.0-rc4+ #21 [ 37.902384] Call Trace: ... [ 38.122680] kobject_add_internal failed for spi1 with -EEXIST, don't try to register things with the same name in the same directory. [ 38.136154] WARNING: CPU: 1 PID: 1467 at lib/kobject.c:238 kobject_add_internal+0x2a5/0x2f0 ... [ 38.513817] pxa2xx-spi pxa2xx-spi.12: problem registering spi master [ 38.521036] pxa2xx-spi: probe of pxa2xx-spi.12 failed with error -17 Fix this by not returning immediately from spi_unregister_controller() if idr_find() doesn't find controller with given ID/bus number. It finds only those controllers that were registered with dynamic SPI bus numbers. Only conditional cleanup between dynamic and fixed bus numbers is to remove allocated IDR. Fixes: 9b61e302 (spi: Pick spi bus number from Linux idr or spi alias) Cc: stable@vger.kernel.org Signed-off-by:
Jarkko Nikula <jarkko.nikula@linux.intel.com> Signed-off-by:
-
Maxime Chevallier authored
commit ce99319a upstream. When SPI transfers can be offloaded using DMA, the SPI core need to build a scatterlist to make sure that the buffer to be transferred is dma-able. This patch fixes the scatterlist entry size computation in the case where the maximum acceptable scatterlist entry supported by the DMA controller is less than PAGE_SIZE, when the buffer is vmalloced. For each entry, the actual size is given by the minimum between the desc_len (which is the max buffer size supported by the DMA controller) and the remaining buffer length until we cross a page boundary. Fixes: 65598c13 ("spi: Fix per-page mapping of unaligned vmalloc-ed buffer") Signed-off-by:
Maxime Chevallier <maxime.chevallier@bootlin.com> Signed-off-by:
-
Eugen Hristev authored
commit 9581329e upstream. The datasheet recommends initializing FIFOs before SPI enable. If we do not do it like this, there may be a strange behavior. We noticed that DMA does not work properly with FIFOs if we do not clear them beforehand or enable them before SPIEN. Signed-off-by:
Eugen Hristev <eugen.hristev@microchip.com> Acked-by:
Nicolas Ferre <nicolas.ferre@microchip.com> Signed-off-by:
-
Santiago Esteban authored
commit 9a06757d upstream. The compatible string is incorrect. Add atmel,sama5d3-pinctrl since it's the appropriate compatible string. Remove the atmel,at91rm9200-pinctrl compatible string, this fallback is useless, there are too many changes. Signed-off-by:
Santiago Esteban <Santiago.Esteban@microchip.com> Signed-off-by:
Ludovic Desroches <ludovic.desroches@microchip.com> Cc: stable@vger.kernel.org #v3.18 Signed-off-by:
Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by:
-
Marek Szyprowski authored
commit 6f487075 upstream. The proper name for the property, which assign given device to IOMMU is 'iommus', not 'iommu'. Fix incorrect name and let all GScaler devices to be properly handled when IOMMU support is enabled. Reported-by:
Andrzej Hajda <a.hajda@samsung.com> Signed-off-by:
Marek Szyprowski <m.szyprowski@samsung.com> Fixes: 6cbfdd73 ("ARM: dts: add sysmmu nodes for exynos5250") Cc: <stable@vger.kernel.org> # v4.8+ Signed-off-by:
Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by:
-
Nicolas Ferre authored
commit e8fd0adf upstream. There are only 19 PIOB pins having primary names PB0-PB18. Not all of them have a 'C' function. So the pinctrl property mask ends up being the same as the other SoC of the at91sam9x5 series. Reported-by:
Marek Sieranski <marek.sieranski@microchip.com> Signed-off-by:
-
Sean Wang authored
commit 0629a019 upstream. Fix that USB initialization fails as below runtime log is present during booting on bananapi-r2 board by adding missing regulators the USB device requires. Current regulators USB device uses are being updated with the correct ones to reflect real configurations which are all from fixed regulators rather than MT6323 one's output. xhci-mtk 1a1c0000.usb: 1a1c0000.usb supply vbus not found, using dummy regulator xhci-mtk 1a240000.usb: 1a240000.usb supply vbus not found, using dummy regulator Cc: stable@vger.kernel.org Fixes: f4ff257c ("arm: dts: mt7623: add support for Bananapi R2 (BPI-R2) board") Signed-off-by:
Sean Wang <sean.wang@mediatek.com> [mb: update kernel log in commit message] Signed-off-by:
Matthias Brugger <matthias.bgg@gmail.com> Signed-off-by:
-
Marek Szyprowski authored
commit a7480dbc upstream. Since commit 04c8b0f8 ("irqchip/gic: Make locking a BL_SWITCHER only feature") coupled CPU idle freezes from time to time on Exynos4210. Later commit 313c8c16 ("PM / CPU: replace raw_notifier with atomic_notifier") changed the context in which the CPU idle code is executed, what results in fully reproducible freeze all the time. However, almost the same coupled CPU idle code works fine on Exynos3250 regardless of the changes made in the mentioned commits. It turned out that the IPI call used on Exynos4210 is conflicting with the change done in the first mentioned commit in GIC. Fix this by using the same code path as for Exynos3250, instead of the IPI call for synchronization with second CPU core, call dsb_sev() directly. Tested on Exynos4210-based Trats and Origen boards. Signed-off-by:
Marc Zyngier <marc.zyngier@arm.com> Acked-by:
Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by:
-
David Lechner authored
commit c5a88cd2 upstream. This fixes the battery voltage monitoring gpio-hog settings. When the gpio is low, it turns off the battery voltage to the ADC chip. However, this needs to be on all of the time so that we can monitor battery voltage. Also, there was a typo that prevented pinmuxing from working correctly. Signed-off-by:
David Lechner <david@lechnology.com> Signed-off-by:
Sekhar Nori <nsekhar@ti.com> Signed-off-by:
-
Marc Zyngier authored
commit 7d8b44c5 upstream. vgic_copy_lpi_list() parses the LPI list and picks LPIs targeting a given vcpu. We allocate the array containing the intids before taking the lpi_list_lock, which means we can have an array size that is not equal to the number of LPIs. This is particularly obvious when looking at the path coming from vgic_enable_lpis, which is not a command, and thus can run in parallel with commands: vcpu 0: vcpu 1: vgic_enable_lpis its_sync_lpi_pending_table vgic_copy_lpi_list intids = kmalloc_array(irq_count) MAPI(lpi targeting vcpu 0) list_for_each_entry(lpi_list_head) intids[i++] = irq->intid; At that stage, we will happily overrun the intids array. Boo. An easy fix is is to break once the array is full. The MAPI command will update the config anyway, and we won't miss a thing. We also make sure that lpi_list_count is read exactly once, so that further updates of that value will not affect the array bound check. Cc: stable@vger.kernel.org Fixes: ccb1d791 ("KVM: arm64: vgic-its: Fix pending table sync") Reviewed-by:
Andre Przywara <andre.przywara@arm.com> Reviewed-by:
Eric Auger <eric.auger@redhat.com> Signed-off-by:
-
Jerome Brunet authored
commit c04ffa71 upstream. Different modules maybe installed by the user on the eMMC connector of the odroid-c2. While the red modules are working without an issue, it seems some black modules (apparently Samsung based) are having issue at 200MHz While the tuning algorithm introduced in v4.14 enables high speed modes on every other tested designs, it seems a problem remains for this particular combination of board and eMMC module. Lowering the maximum frequency of the eMMC on this board until we can figure out a better solution. Fixes: d341ca88 ("mmc: meson-gx: rework tuning function") Suggested-by:
Ellie Reeves <ellierevves@gmail.com> Signed-off-by:
Jerome Brunet <jbrunet@baylibre.com> Cc: stable@vger.kernel.org Signed-off-by:
Kevin Hilman <khilman@baylibre.com> Signed-off-by:
-
Felipe Balbi authored
commit eaa358c7 upstream. Mention that ->complete() should never be called from within usb_ep_queue(). Signed-off-by:
-
