- 24 Feb, 2022 35 commits
-
-
Luiz Augusto von Dentz authored
When using hci_le_create_conn_sync it shall wait for the conn_timeout since the connection complete may take longer than just 2 seconds. Also fix the masking of HCI_EV_LE_ENHANCED_CONN_COMPLETE and HCI_EV_LE_CONN_COMPLETE so they are never both set so we can predict which one the controller will use in case of HCI_OP_LE_CREATE_CONN. Fixes: 6cd29ec6 ("Bluetooth: hci_sync: Wait for proper events when connecting LE") Signed-off-by:
Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by:
Marcel Holtmann <marcel@holtmann.org>
-
Luiz Augusto von Dentz authored
hci_update_accept_list_sync is returning the filter based on the error but that gets overwritten by hci_le_set_addr_resolution_enable_sync return instead of using the actual result of the likes of hci_le_add_accept_list_sync which was intended. Fixes: ad383c2c ("Bluetooth: hci_sync: Enable advertising when LL privacy is enabled") Signed-off-by:
-
Wang Qing authored
len should be assigned after a null check Signed-off-by:
Wang Qing <wangqing@vivo.com> Signed-off-by:
-
Luiz Augusto von Dentz authored
Since bt_skb_sendmmsg can be used with the likes of SOCK_STREAM it shall return the partial chunks it could allocate instead of freeing everything as otherwise it can cause problems like bellow. Fixes: 81be03e0 ("Bluetooth: RFCOMM: Replace use of memcpy_from_msg with bt_skb_sendmmsg") Reported-by:
Paul Menzel <pmenzel@molgen.mpg.de> Link: https://lore.kernel.org/r/d7206e12-1b99-c3be-84f4-df22af427ef5@molgen.mpg.de BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=215594Signed-off-by:
-
Lin Ma authored
Previous commit e0448092 ("Bluetooth: defer cleanup of resources in hci_unregister_dev()") defers all destructive actions to hci_release_dev() to prevent cocurrent problems like NPD, UAF. However, there are still some exceptions that are ignored. The smp_unregister() in hci_dev_close_sync() (previously in hci_dev_do_close) will release resources like the sensitive channel and the smp_dev objects. Consider the situations the device is detaching or power down while the kernel is still operating on it, the following data race could take place. thread-A hci_dev_close_sync | thread-B read_local_oob_ext_data | hci_dev_unlock() | ... | hci_dev_lock() if (hdev->smp_data) | chan = hdev->smp_data | | chan = hdev->smp_data (3) | hdev->smp_data = NULL (1) | if (!chan || !chan->data) (4) ... | smp = chan->data | smp = chan->data if (smp) | chan->data = NULL (2) | ... | kfree_sensitive(smp) | | // dereference smp trigger UFA That is, the objects hdev->smp_data and chan->data both suffer from the data races. In a preempt-enable kernel, the above schedule (when (3) is before (1) and (4) is before (2)) leads to UAF bugs. It can be reproduced in the latest kernel and below is part of the report: [ 49.097146] ================================================================ [ 49.097611] BUG: KASAN: use-after-free in smp_generate_oob+0x2dd/0x570 [ 49.097611] Read of size 8 at addr ffff888006528360 by task generate_oob/155 [ 49.097611] [ 49.097611] Call Trace: [ 49.097611] <TASK> [ 49.097611] dump_stack_lvl+0x34/0x44 [ 49.097611] print_address_description.constprop.0+0x1f/0x150 [ 49.097611] ? smp_generate_oob+0x2dd/0x570 [ 49.097611] ? smp_generate_oob+0x2dd/0x570 [ 49.097611] kasan_report.cold+0x7f/0x11b [ 49.097611] ? smp_generate_oob+0x2dd/0x570 [ 49.097611] smp_generate_oob+0x2dd/0x570 [ 49.097611] read_local_oob_ext_data+0x689/0xc30 [ 49.097611] ? hci_event_packet+0xc80/0xc80 [ 49.097611] ? sysvec_apic_timer_interrupt+0x9b/0xc0 [ 49.097611] ? asm_sysvec_apic_timer_interrupt+0x12/0x20 [ 49.097611] ? mgmt_init_hdev+0x1c/0x240 [ 49.097611] ? mgmt_init_hdev+0x28/0x240 [ 49.097611] hci_sock_sendmsg+0x1880/0x1e70 [ 49.097611] ? create_monitor_event+0x890/0x890 [ 49.097611] ? create_monitor_event+0x890/0x890 [ 49.097611] sock_sendmsg+0xdf/0x110 [ 49.097611] __sys_sendto+0x19e/0x270 [ 49.097611] ? __ia32_sys_getpeername+0xa0/0xa0 [ 49.097611] ? kernel_fpu_begin_mask+0x1c0/0x1c0 [ 49.097611] __x64_sys_sendto+0xd8/0x1b0 [ 49.097611] ? syscall_exit_to_user_mode+0x1d/0x40 [ 49.097611] do_syscall_64+0x3b/0x90 [ 49.097611] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 49.097611] RIP: 0033:0x7f5a59f51f64 ... [ 49.097611] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f5a59f51f64 [ 49.097611] RDX: 0000000000000007 RSI: 00007f5a59d6ac70 RDI: 0000000000000006 [ 49.097611] RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000 [ 49.097611] R10: 0000000000000040 R11: 0000000000000246 R12: 00007ffec26916ee [ 49.097611] R13: 00007ffec26916ef R14: 00007f5a59d6afc0 R15: 00007f5a59d6b700 To solve these data races, this patch places the smp_unregister() function in the protected area by the hci_dev_lock(). That is, the smp_unregister() function can not be concurrently executed when operating functions (most of them are mgmt operations in mgmt.c) hold the device lock. This patch is tested with kernel LOCK DEBUGGING enabled. The price from the extended holding time of the device lock is supposed to be low as the smp_unregister() function is fairly short and efficient. Signed-off-by:
Lin Ma <linma@zju.edu.cn> Signed-off-by:
-
Luiz Augusto von Dentz authored
sent_cmd memory is not freed before freeing hci_dev causing it to leak it contents. Signed-off-by:
-
Mauri Sandberg authored
Obtaining a MAC address may be deferred in cases when the MAC is stored in an NVMEM block, for example, and it may not be ready upon the first retrieval attempt and return EPROBE_DEFER. It is also possible that a port that does not rely on NVMEM has been already created when getting the defer request. Thus, also the resources allocated previously must be freed when doing a roll-back. Fixes: 76723bca ("net: mv643xx_eth: add DT parsing support") Signed-off-by:
Mauri Sandberg <maukka@ext.kapsi.fi> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20220223142337.41757-1-maukka@ext.kapsi.fiSigned-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Xin Long authored
As Jakub noticed, prints should be avoided on the datapath. Also, as packets would never come to the else branch in ping_lookup(), remove pr_err() from ping_lookup(). Fixes: 35a79e64 ("ping: fix the dif and sdif check in ping_lookup") Reported-by:
Xin Long <lucien.xin@gmail.com> Link: https://lore.kernel.org/r/1ef3f2fcd31bd681a193b1fcf235eee1603819bd.1645674068.git.lucien.xin@gmail.comSigned-off-by:
-
Mateusz Palczewski authored
Revert of a patch that instead of fixing a AQ error when trying to reset BW limit introduced several regressions related to creation and managing TC. Currently there are errors when creating a TC on both PF and VF. Error log: [17428.783095] i40e 0000:3b:00.1: AQ command Config VSI BW allocation per TC failed = 14 [17428.783107] i40e 0000:3b:00.1: Failed configuring TC map 0 for VSI 391 [17428.783254] i40e 0000:3b:00.1: AQ command Config VSI BW allocation per TC failed = 14 [17428.783259] i40e 0000:3b:00.1: Unable to configure TC map 0 for VSI 391 This reverts commit 3d250466. Fixes: 3d250466 (i40e: Fix reset bw limit when DCB enabled with 1 TC) Signed-off-by:
Mateusz Palczewski <mateusz.palczewski@intel.com> Signed-off-by:
Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://lore.kernel.org/r/20220223175347.1690692-1-anthony.l.nguyen@intel.comSigned-off-by:
-
Paul Blakey authored
Ipv6 ttl, label and tos fields are modified without first pulling/pushing the ipv6 header, which would have updated the hw csum (if available). This might cause csum validation when sending the packet to the stack, as can be seen in the trace below. Fix this by updating skb->csum if available. Trace resulted by ipv6 ttl dec and then sending packet to conntrack [actions: set(ipv6(hlimit=63)),ct(zone=99)]: [295241.900063] s_pf0vf2: hw csum failure [295241.923191] Call Trace: [295241.925728] <IRQ> [295241.927836] dump_stack+0x5c/0x80 [295241.931240] __skb_checksum_complete+0xac/0xc0 [295241.935778] nf_conntrack_tcp_packet+0x398/0xba0 [nf_conntrack] [295241.953030] nf_conntrack_in+0x498/0x5e0 [nf_conntrack] [295241.958344] __ovs_ct_lookup+0xac/0x860 [openvswitch] [295241.968532] ovs_ct_execute+0x4a7/0x7c0 [openvswitch] [295241.979167] do_execute_actions+0x54a/0xaa0 [openvswitch] [295242.001482] ovs_execute_actions+0x48/0x100 [openvswitch] [295242.006966] ovs_dp_process_packet+0x96/0x1d0 [openvswitch] [295242.012626] ovs_vport_receive+0x6c/0xc0 [openvswitch] [295242.028763] netdev_frame_hook+0xc0/0x180 [openvswitch] [295242.034074] __netif_receive_skb_core+0x2ca/0xcb0 [295242.047498] netif_receive_skb_internal+0x3e/0xc0 [295242.052291] napi_gro_receive+0xba/0xe0 [295242.056231] mlx5e_handle_rx_cqe_mpwrq_rep+0x12b/0x250 [mlx5_core] [295242.062513] mlx5e_poll_rx_cq+0xa0f/0xa30 [mlx5_core] [295242.067669] mlx5e_napi_poll+0xe1/0x6b0 [mlx5_core] [295242.077958] net_rx_action+0x149/0x3b0 [295242.086762] __do_softirq+0xd7/0x2d6 [295242.090427] irq_exit+0xf7/0x100 [295242.093748] do_IRQ+0x7f/0xd0 [295242.096806] common_interrupt+0xf/0xf [295242.100559] </IRQ> [295242.102750] RIP: 0033:0x7f9022e88cbd [295242.125246] RSP: 002b:00007f9022282b20 EFLAGS: 00000246 ORIG_RAX: ffffffffffffffda [295242.132900] RAX: 0000000000000005 RBX: 0000000000000010 RCX: 0000000000000000 [295242.140120] RDX: 00007f9022282ba8 RSI: 00007f9022282a30 RDI: 00007f9014005c30 [295242.147337] RBP: 00007f9014014d60 R08: 0000000000000020 R09: 00007f90254a8340 [295242.154557] R10: 00007f9022282a28 R11: 0000000000000246 R12: 0000000000000000 [295242.161775] R13: 00007f902308c000 R14: 000000000000002b R15: 00007f9022b71f40 Fixes: 3fdbd1ce ("openvswitch: add ipv6 'set' action") Signed-off-by:
Paul Blakey <paulb@nvidia.com> Link: https://lore.kernel.org/r/20220223163416.24096-1-paulb@nvidia.comSigned-off-by:
-
Niels Dossche authored
valid_lft, prefered_lft and tstamp are always accessed under the lock "lock" in other places. Reading these without taking the lock may result in inconsistencies regarding the calculation of the valid and preferred variables since decisions are taken on these fields for those variables. Signed-off-by:
Niels Dossche <dossche.niels@gmail.com> Reviewed-by:
David Ahern <dsahern@kernel.org> Signed-off-by:
Niels Dossche <niels.dossche@ugent.be> Link: https://lore.kernel.org/r/20220223131954.6570-1-niels.dossche@ugent.beSigned-off-by:
-
Fabio M. De Francesco authored
smc_pnetid_by_table_ib() uses read_lock() and then it calls smc_pnet_apply_ib() which, in turn, calls mutex_lock(&smc_ib_devices.mutex). read_lock() disables preemption. Therefore, the code acquires a mutex while in atomic context and it leads to a SAC bug. Fix this bug by replacing the rwlock with a mutex. Reported-and-tested-by: syzbot+4f322a6d84e991c38775@syzkaller.appspotmail.com Fixes: 64e28b52 ("net/smc: add pnet table namespace support") Confirmed-by:
Tony Lu <tonylu@linux.alibaba.com> Signed-off-by:
Fabio M. De Francesco <fmdefrancesco@gmail.com> Acked-by:
Karsten Graul <kgraul@linux.ibm.com> Link: https://lore.kernel.org/r/20220223100252.22562-1-fmdefrancesco@gmail.comSigned-off-by:
-
Manish Chopra authored
Commit b7a49f73 ("bnx2x: Utilize firmware 7.13.21.0") added new firmware support in the driver with maintaining older firmware compatibility. However, older firmware was not added in MODULE_FIRMWARE() which caused missing firmware files in initrd image leading to driver load failure from initrd. This patch adds MODULE_FIRMWARE() for older firmware version to have firmware files included in initrd. Fixes: b7a49f73 ("bnx2x: Utilize firmware 7.13.21.0") Link: https://bugzilla.kernel.org/show_bug.cgi?id=215627Signed-off-by:
Manish Chopra <manishc@marvell.com> Signed-off-by:
Alok Prasad <palok@marvell.com> Signed-off-by:
Ariel Elior <aelior@marvell.com> Link: https://lore.kernel.org/r/20220223085720.12021-1-manishc@marvell.comSigned-off-by:
-
Marek Marczykowski-Górecki authored
This reverts commit 2afeec08. The reasoning in the commit was wrong - the code expected to setup the watch even if 'hotplug-status' didn't exist. In fact, it relied on the watch being fired the first time - to check if maybe 'hotplug-status' is already set to 'connected'. Not registering a watch for non-existing path (which is the case if hotplug script hasn't been executed yet), made the backend not waiting for the hotplug script to execute. This in turns, made the netfront think the interface is fully operational, while in fact it was not (the vif interface on xen-netback side might not be configured yet). This was a workaround for 'hotplug-status' erroneously being removed. But since that is reverted now, the workaround is not necessary either. More discussion at https://lore.kernel.org/xen-devel/afedd7cb-a291-e773-8b0d-4db9b291fa98@ipxe.org/T/#uSigned-off-by:
Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com> Reviewed-by:
Paul Durrant <paul@xen.org> Reviewed-by:
Michael Brown <mbrown@fensystems.co.uk> Link: https://lore.kernel.org/r/20220222001817.2264967-2-marmarek@invisiblethingslab.comSigned-off-by:
-
Marek Marczykowski-Górecki authored
This reverts commit 1f256578. The 'hotplug-status' node should not be removed as long as the vif device remains configured. Otherwise the xen-netback would wait for re-running the network script even if it was already called (in case of the frontent re-connecting). But also, it _should_ be removed when the vif device is destroyed (for example when unbinding the driver) - otherwise hotplug script would not configure the device whenever it re-appear. Moving removal of the 'hotplug-status' node was a workaround for nothing calling network script after xen-netback module is reloaded. But when vif interface is re-created (on xen-netback unbind/bind for example), the script should be called, regardless of who does that - currently this case is not handled by the toolstack, and requires manual script call. Keeping hotplug-status=connected to skip the call is wrong and leads to not configured interface. More discussion at https://lore.kernel.org/xen-devel/afedd7cb-a291-e773-8b0d-4db9b291fa98@ipxe.org/T/#uSigned-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linuxJakub Kicinski authored
Saeed Mahameed says: ==================== mlx5 fixes 2022-02-22 This series provides bug fixes to mlx5 driver. Please pull and let me know if there is any problem. * tag 'mlx5-fixes-2022-02-23' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux: net/mlx5e: Fix VF min/max rate parameters interchange mistake net/mlx5e: Add missing increment of count net/mlx5e: MPLSoUDP decap, fix check for unsupported matches net/mlx5e: Fix MPLSoUDP encap to use MPLS action information net/mlx5e: Add feature check for set fec counters net/mlx5e: TC, Skip redundant ct clear actions net/mlx5e: TC, Reject rules with forward and drop actions net/mlx5e: TC, Reject rules with drop and modify hdr action net/mlx5e: kTLS, Use CHECKSUM_UNNECESSARY for device-offloaded packets net/mlx5e: Fix wrong return value on ioctl EEPROM query failure net/mlx5: Fix possible deadlock on rule deletion net/mlx5: Fix tc max supported prio for nic mode net/mlx5: Fix wrong limitation of metadata match on ecpf net/mlx5: Update log_max_qp value to be 17 at most net/mlx5: DR, Fix the threshold that defines when pool sync is initiated net/mlx5: DR, Don't allow match on IP w/o matching on full ethertype/ip_version net/mlx5: DR, Fix slab-out-of-bounds in mlx5_cmd_dr_create_fte net/mlx5: DR, Cache STE shadow memory net/mlx5: Update the list of the PCI supported devices ==================== Link: https://lore.kernel.org/r/20220224001123.365265-1-saeed@kernel.orgSigned-off-by:
-
Gal Pressman authored
The VF min and max rate were passed incorrectly and resulted in wrongly interchanging them. Fix the order of parameters in mlx5_esw_qos_set_vport_rate(). Fixes: d7df09f5 ("net/mlx5: E-switch, Enable vport QoS on demand") Signed-off-by:
Gal Pressman <gal@nvidia.com> Reviewed-by:
Aya Levin <ayal@nvidia.com> Signed-off-by:
Saeed Mahameed <saeedm@nvidia.com>
-
Lama Kayal authored
Add mistakenly missing increment of count variable when looping over output buffer in mlx5e_self_test(). This resolves the issue of garbage values output when querying with self test via ethtool. before: $ ethtool -t eth2 The test result is PASS The test extra info: Link Test 0 Speed Test 1768697188 Health Test 758528120 Loopback Test 3288687 after: $ ethtool -t eth2 The test result is PASS The test extra info: Link Test 0 Speed Test 0 Health Test 0 Loopback Test 0 Fixes: 7990b1b5 ("net/mlx5e: loopback test is not supported in switchdev mode") Signed-off-by:
Lama Kayal <lkayal@nvidia.com> Reviewed-by:
-
Maor Dickman authored
Currently offload of rule on bareudp device require tunnel key in order to match on mpls fields and without it the mpls fields are ignored, this is incorrect due to the fact udp tunnel doesn't have key to match on. Fix by returning error in case flow is matching on tunnel key. Fixes: 72046a91 ("net/mlx5e: Allow to match on mpls parameters") Signed-off-by:
Maor Dickman <maord@nvidia.com> Reviewed-by:
Roi Dayan <roid@nvidia.com> Signed-off-by:
-
Maor Dickman authored
Currently the MPLSoUDP encap builds the MPLS header using encap action information (tunnel id, ttl and tos) instead of the MPLS action information (label, ttl, tc and bos) which is wrong. Fix by storing the MPLS action information during the flow action parse and later using it to create the encap MPLS header. Fixes: f828ca6a ("net/mlx5e: Add support for hw encapsulation of MPLS over UDP") Signed-off-by:
-
Lama Kayal authored
Fec counters support is checked via the PCAM feature_cap_mask, bit 0: PPCNT_counter_group_Phy_statistical_counter_group. Add feature check to avoid faulty behavior. Fixes: 0a1498eb ("net/mlx5e: Expose FEC counters via ethtool") Signed-off-by:
-
Roi Dayan authored
Offload of ct clear action is just resetting the reg_c register. It's done by allocating modify hdr resources which is limited. Doing it multiple times is redundant and wasting modify hdr resources and if resources depleted the driver will fail offloading the rule. Ignore redundant ct clear actions after the first one. Fixes: 806401c2 ("net/mlx5e: CT, Fix multiple allocations and memleak of mod acts") Signed-off-by:
Ariel Levkovich <lariel@nvidia.com> Reviewed-by:
-
Roi Dayan authored
Such rules are redundant but allowed and passed to the driver. The driver does not support offloading such rules so return an error. Fixes: 03a9d11e ("net/mlx5e: Add TC drop and mirred/redirect action parsing for SRIOV offloads") Signed-off-by:
Oz Shlomo <ozsh@nvidia.com> Signed-off-by:
-
Roi Dayan authored
This kind of action is not supported by firmware and generates a syndrome. kernel: mlx5_core 0000:08:00.0: mlx5_cmd_check:777:(pid 102063): SET_FLOW_TABLE_ENTRY(0x936) op_mod(0x0) failed, status bad parameter(0x3), syndrome (0x8708c3) Fixes: d7e75a32 ("net/mlx5e: Add offloading of E-Switch TC pedit (header re-write) actions") Signed-off-by:
-
Tariq Toukan authored
For RX TLS device-offloaded packets, the HW spec guarantees checksum validation for the offloaded packets, but does not define whether the CQE.checksum field matches the original packet (ciphertext) or the decrypted one (plaintext). This latitude allows architetctural improvements between generations of chips, resulting in different decisions regarding the value type of CQE.checksum. Hence, for these packets, the device driver should not make use of this CQE field. Here we block CHECKSUM_COMPLETE usage for RX TLS device-offloaded packets, and use CHECKSUM_UNNECESSARY instead. Value of the packet's tcp_hdr.csum is not modified by the HW, and it always matches the original ciphertext. Fixes: 1182f365 ("net/mlx5e: kTLS, Add kTLS RX HW offload support") Signed-off-by:
Tariq Toukan <tariqt@nvidia.com> Signed-off-by:
-
Gal Pressman authored
The ioctl EEPROM query wrongly returns success on read failures, fix that by returning the appropriate error code. Fixes: bb64143e ("net/mlx5e: Add ethtool support for dump module EEPROM") Signed-off-by:
-
Maor Gottlieb authored
Add missing call to up_write_ref_node() which releases the semaphore in case the FTE doesn't have destinations, such in drop rule case. Fixes: 465e7baa ("net/mlx5: Fix deletion of duplicate rules") Signed-off-by:
Maor Gottlieb <maorg@nvidia.com> Reviewed-by:
Mark Bloch <mbloch@nvidia.com> Signed-off-by:
-
Chris Mi authored
Only prio 1 is supported if firmware doesn't support ignore flow level for nic mode. The offending commit removed the check wrongly. Add it back. Fixes: 9a99c8f1 ("net/mlx5e: E-Switch, Offload all chain 0 priorities when modify header and forward action is not supported") Signed-off-by:
Chris Mi <cmi@nvidia.com> Reviewed-by:
-
Ariel Levkovich authored
Match metadata support check returns false for ecpf device. However, this support does exist for ecpf and therefore this limitation should be removed to allow feature such as stacked devices and internal port offloaded to be supported. Fixes: 92ab1eb3 ("net/mlx5: E-Switch, Enable vport metadata matching if firmware supports it") Signed-off-by:
-
Maher Sanalla authored
Currently, log_max_qp value is dependent on what FW reports as its max capability. In reality, due to a bug, some FWs report a value greater than 17, even though they don't support log_max_qp > 17. This FW issue led the driver to exhaust memory on startup. Thus, log_max_qp value is set to be no more than 17 regardless of what FW reports, as it was before the cited commit. Fixes: f79a609e ("net/mlx5: Update log_max_qp value to FW max capability") Signed-off-by:
Maher Sanalla <msanalla@nvidia.com> Reviewed-by:
Avihai Horon <avihaih@nvidia.com> Signed-off-by:
-
Yevgeny Kliteynik authored
When deciding whether to start syncing and actually free all the "hot" ICM chunks, we need to consider the type of the ICM chunks that we're dealing with. For instance, the amount of available ICM for MODIFY_ACTION is significantly lower than the usual STE ICM, so the threshold should account for that - otherwise we can deplete MODIFY_ACTION memory just by creating and deleting the same modify header action in a continuous loop. This patch replaces the hard-coded threshold with a dynamic value. Fixes: 1c586514 ("net/mlx5: DR, ICM memory pools sync optimization") Signed-off-by:
Yevgeny Kliteynik <kliteyn@nvidia.com> Reviewed-by:
Alex Vesker <valex@nvidia.com> Signed-off-by:
-
Yevgeny Kliteynik authored
Currently SMFS allows adding rule with matching on src/dst IP w/o matching on full ethertype or ip_version, which is not supported by HW. This patch fixes this issue and adds the check as it is done in DMFS. Fixes: 26d688e3 ("net/mlx5: DR, Add Steering entry (STE) utilities") Signed-off-by:
-
Yevgeny Kliteynik authored
When adding a rule with 32 destinations, we hit the following out-of-band access issue: BUG: KASAN: slab-out-of-bounds in mlx5_cmd_dr_create_fte+0x18ee/0x1e70 This patch fixes the issue by both increasing the allocated buffers to accommodate for the needed actions and by checking the number of actions to prevent this issue when a rule with too many actions is provided. Fixes: 1ffd4989 ("net/mlx5: DR, Increase supported num of actions to 32") Signed-off-by:
-
Yevgeny Kliteynik authored
During rule insertion on each ICM memory chunk we also allocate shadow memory used for management. This includes the hw_ste, dr_ste and miss list per entry. Since the scale of these allocations is large we noticed a performance hiccup that happens once malloc and free are stressed. In extreme usecases when ~1M chunks are freed at once, it might take up to 40 seconds to complete this, up to the point the kernel sees this as self-detected stall on CPU: rcu: INFO: rcu_sched self-detected stall on CPU To resolve this we will increase the reuse of shadow memory. Doing this we see that a time in the aforementioned usecase dropped from ~40 seconds to ~8-10 seconds. Fixes: 29cf8feb ("net/mlx5: DR, ICM pool memory allocator") Signed-off-by:
-
Meir Lichtinger authored
Add the upcoming BlueField-4 and ConnectX-8 device IDs. Fixes: 2e9d3e83 ("net/mlx5: Update the list of the PCI supported devices") Signed-off-by:
Meir Lichtinger <meirl@nvidia.com> Reviewed-by:
-
- 23 Feb, 2022 5 commits
-
-
David S. Miller authored
Heyi Guo says: ==================== drivers/net/ftgmac100: fix occasional DHCP failure This patch set is to fix the issues discussed in the mail thread: https://lore.kernel.org/netdev/51f5b7a7-330f-6b3c-253d-10e45cdb6805@linux.alibaba.com/ and follows the advice from Andrew Lunn. The first 2 patches refactors the code to enable adjust_link calling reset function directly. ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Heyi Guo authored
DHCP failures were observed with systemd 247.6. The issue could be reproduced by rebooting Aspeed 2600 and then running ifconfig ethX down/up. It is caused by below procedures in the driver: 1. ftgmac100_open() enables net interface and call phy_start() 2. When PHY is link up, it calls netif_carrier_on() and then adjust_link callback 3. ftgmac100_adjust_link() will schedule the reset task 4. ftgmac100_reset_task() will then reset the MAC in another schedule After step 2, systemd will be notified to send DHCP discover packet, while the packet might be corrupted by MAC reset operation in step 4. Call ftgmac100_reset() directly instead of scheduling task to fix the issue. Signed-off-by:
Heyi Guo <guoheyi@linux.alibaba.com> Signed-off-by:
-
Heyi Guo authored
This is to prepare for ftgmac100_adjust_link() to call ftgmac100_reset() directly. Only code places are changed. Signed-off-by:
-
Heyi Guo authored
This is to prepare for ftgmac100_adjust_link() to call reset function directly, instead of task schedule. Signed-off-by:
-
Wan Jiabing authored
Fix following coccicheck warning: ./net/sched/act_api.c:277:7-49: WARNING avoid newline at end of message in NL_SET_ERR_MSG_MOD Signed-off-by:
Wan Jiabing <wanjiabing@vivo.com> Signed-off-by:
-
