- 03 Feb, 2022 24 commits
-
-
Lorenzo Bianconi authored
mac80211 provides aid in vif->bss_conf.aid for sta mode and not in sta->aid. Fix mt7915_mcu_wtbl_generic_tlv routine using proper value for aid in sta mode. Fixes: e57b7901 ("mt76: add mac80211 driver for MT7915 PCIe-based chipsets") Signed-off-by:
Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by:
Felix Fietkau <nbd@nbd.name>
-
Lorenzo Bianconi authored
Fix the following sparse warning: drivers/net/wireless/mediatek/mt76/mac80211.c:183:32: warning: symbol 'mt76_sar_capa' was not declared. Should it be static? Signed-off-by:
-
Bo Jiao authored
Add pci_device_id to enable mt7916. Note that MT_HW_CHIPID is no longer used for further chips, so drop it accordingly. Co-developed-by:
Sujuan Chen <sujuan.chen@mediatek.com> Signed-off-by:
Ryder Lee <ryder.lee@mediatek.com> Signed-off-by:
Bo Jiao <Bo.Jiao@mediatek.com> Signed-off-by:
-
Bo Jiao authored
Since mt7916 supports up to 544 wcid entries, wlan_idx_hi needs to be set in order to support wcid index >= 256 Signed-off-by:
-
Lorenzo Bianconi authored
Move key configuration code shared between mt7921 and mt7915 in mt76-connac module and remove duplicated code. Signed-off-by:
-
Lorenzo Bianconi authored
Rely on mt76_connac_get_phy_mode and mt76_connac_get_he_phy_cap utility routines in mt7915 driver and remove duplicated code. Signed-off-by:
-
Lorenzo Bianconi authored
Move mt76_connac_chan_bw in mt76-connac code and remove duplicated code from mt7921 and mt7915 driver. Signed-off-by:
-
Lorenzo Bianconi authored
Move mt76_connac_mcu_get_cipher in mt76-connac code and remove duplicated code from mt7921 and mt7915 driver. Signed-off-by:
-
Lorenzo Bianconi authored
Rely on common code available in mt76-connac module and remove mt7915_mcu_add_tlv/mt7915_mcu_add_nested_tlv in mt7915 driver. Signed-off-by:
-
Lorenzo Bianconi authored
Rely on mt76_connac_mcu_alloc_wtbl_req routine and remove duplicated code. Signed-off-by:
-
Lorenzo Bianconi authored
Rely on mt76_connac_mcu_alloc_sta_req routine and remove duplicated code. Add MT76_CONNAC_LIB module dependency in mt7915 module Signed-off-by:
-
Lorenzo Bianconi authored
Similar to mt7915 driver, fix tag len error for sta_rec_wtbl, which causes fw parsing error for the tags placed behind it. Fixes: d0e274af ("mt76: mt76_connac: create mcu library") Signed-off-by:
-
Bo Jiao authored
Adjust proper eeprom size and add default calibrated data support for mt7916. Co-developed-by:
Shayne Chen <shayne.chen@mediatek.com> Signed-off-by:
-
Bo Jiao authored
Update v2 offset. This is an intermediate patch to add mt7916 support. Co-developed-by:
-
Bo Jiao authored
mt7916 reports rx rate from rxd group3 directly. Co-developed-by:
-
Bo Jiao authored
Update txfree v3 format. This is an intermediate patch to add mt7916 support. Co-developed-by:
-
Bo Jiao authored
The mt7916 can support up to 544 wcid entries. This is an intermediate patch to add mt7916 support. Co-developed-by:
-
Bo Jiao authored
This is an intermediate patch to add mt7916 support. Co-developed-by:
-
Bo Jiao authored
Update firmware initialization for mt7916. This is an intermediate patch to add mt7916 support. Co-developed-by:
-
Bo Jiao authored
The RXQ of mt7916 are separated to MT_RXQ_MAIN_WA and MT_RXQ_MCU_WA, so, add initialization and preftech setting for the queue MT_RXQ_MAIN_WA. This is an intermediate patch to add mt7916 support. Co-developed-by:
-
Bo Jiao authored
mt7916 add MT_RXQ_MAIN_WA to receive tx free event separately This is an intermediate patch to add mt7916 support. Co-developed-by:
-
Bo Jiao authored
Add mt7915_reg_desc to differentiate chip generations. This is an intermediate patch to introduce mt7916 support. Co-developed-by:
-
Bo Jiao authored
Add mt7915_mmio_probe() which will be used for the upcoming devices. This is an intermediate patch to add mt7916 support. Co-developed-by:
-
Felix Fietkau authored
Check the register status bit instead of the trigger bit Signed-off-by:
-
- 01 Feb, 2022 11 commits
-
-
Hector Martin authored
This allows us to get console messages if the firmware crashed during early init, or if an operation failed and we're about to shut down. Reviewed-by:
Linus Walleij <linus.walleij@linaro.org> Reviewed-by:
Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by:
Hector Martin <marcan@marcan.st> Reviewed-by:
Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by:
Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220131160713.245637-10-marcan@marcan.st
-
Hector Martin authored
Make all the iovar name arguments const char * instead of just char *. Reviewed-by:
-
Hector Martin authored
This was missing a NULL check, and we can collapse the strlen/alloc/copy into a devm_kstrdup(). Reviewed-by:
-
Hector Martin authored
The driver was enabling IRQs before the message processing was initialized. This could cause IRQs to come in too early and crash the driver. Instead, move the IRQ enable and hostready to a bus preinit function, at which point everything is properly initialized. Fixes: 9e37f045 ("brcmfmac: Adding PCIe bus layer support.") Reviewed-by:
-
Hector Martin authored
The alignment check was wrong (e.g. & 4 instead of & 3), and the logic was also inefficient if the length was not a multiple of 4, since it would needlessly fall back to copying the entire buffer bytewise. We already have a perfectly good memcpy_toio function, so just call that instead of rolling our own copy logic here. brcmf_pcie_init_ringbuffers was already using it anyway. Fixes: 9e37f045 ("brcmfmac: Adding PCIe bus layer support.") Reviewed-by:
-
Hector Martin authored
Move one of the declarations from sdio.c to pcie.c, since it makes no sense in the former (SDIO support is optional), and add missing ones. Fixes: 75729e11 ("brcmfmac: expose firmware config files through modinfo") Reviewed-by:
-
Hector Martin authored
If boardrev is missing from the NVRAM we add a default one, but this might need more space in the output buffer than was allocated. Ensure we have enough padding for this in the buffer. Fixes: 46f2b38a ("brcmfmac: insert default boardrev in nvram data if missing") Reviewed-by:
-
Hector Martin authored
This avoids leaking memory if brcmf_chip_get_raminfo fails. Note that the CLM blob is released in the device remove path. Fixes: 82f93cf4 ("brcmfmac: get chip's default RAM info during PCIe setup") Reviewed-by:
-
Colin Ian King authored
Variable ul_encalgo is initialized with a value that is never read, it is being re-assigned a new value in every case in the following switch statement. The initialization is redundant and can be removed. Signed-off-by:
Colin Ian King <colin.i.king@gmail.com> Acked-by:
Ping-Ke Shih <pkshih@realtek.com> Signed-off-by:
-
Yang Guang authored
The coccinelle report ./include/linux/ssb/ssb_driver_gige.h:98:8-9: WARNING: return of 0/1 in function 'ssb_gige_must_flush_posted_writes' with return type bool Return statements in functions returning bool should use true/false instead of 1/0. Reported-by:
Zeal Robot <zealci@zte.com.cn> Signed-off-by:
Yang Guang <yang.guang5@zte.com.cn> Signed-off-by:
David Yang <davidcomponentone@gmail.com> Signed-off-by:
-
Jiasheng Jiang authored
As the possible failure of the ioremap(), the 'local->sram' and other two could be NULL. Therefore it should be better to check it in order to avoid the later dev_dbg. Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by:
Jiasheng Jiang <jiasheng@iscas.ac.cn> Signed-off-by:
-
- 31 Jan, 2022 5 commits
-
-
Colin Ian King authored
Don't populate the read-only array queue_id_to_wmm_aci on the stack but instead make it static. Also makes the object code a little smaller. Signed-off-by:
-
Changcheng Deng authored
Use min_t() in order to make code cleaner. Reported-by:
Changcheng Deng <deng.changcheng@zte.com.cn> Signed-off-by:
-
Ping-Ke Shih authored
Ping-Ke Shih answered[1] a question for a user about an rtl8821ce device that reported RFE 6, which the driver did not support. Ping-Ke suggested a possible fix, but the user never reported back. A second user discovered the above thread and tested the proposed fix. Accordingly, I am pushing this change, even though I am not the author. [1] https://lore.kernel.org/linux-wireless/3f5e2f6eac344316b5dd518ebfea2f95@realtek.com/Signed-off-by:
masterzorag <masterzorag@gmail.com> Signed-off-by:
Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by:
-
Po-Hao Huang authored
Previously we allocated less memory than actual required, overwrite to the buffer causes the mm module to complaint and raise access violation faults. Along with potential memory leaks when returned early. Fix these by passing the correct size and proper deinit flow. Fixes: 10d162b2 ("rtw88: 8822c: add ieee80211_ops::hw_scan") Signed-off-by:
Po-Hao Huang <phhuang@realtek.com> Signed-off-by:
-
Po-Hao Huang authored
Upon hw scan completion, idle mode is not re-entered. This might increase power consumption under no link mode. Fix this by adding the re-enter flow. We need another work for this since enter_ips waits for c2h_work to finish, which might lead to deadlock if caller is in the same work. Fixes: 10d162b2 ("rtw88: 8822c: add ieee80211_ops::hw_scan") Signed-off-by:
-
