- 05 Mar, 2012 1 commit
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6Linus Torvalds authored
MFD fixes from Samuel Ortiz: "This is the pull request for the MFD fixes for 3.3. We have a few NULL pointer dereferences fixes, an ACPI conflict check fix, and a couple of wm8994 fixes." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6: mfd: Correct readability of WM8994 DC servo 4E register mfd: Initialize tps65912 irq platform data properly mfd: Fix ACPI conflict check mfd: Fix ab8500 error path bug mfd: Test for jack detection when deciding if wm8994 should suspend mfd: Initialize tps65910 irq platform data properly mfd: Fix possible s5m null pointer dereference mfd: wm8350 variable dereferenced before check
-
- 04 Mar, 2012 4 commits
-
-
Linus Torvalds authored
It's only used inside fs/dcache.c, and we're going to play games with it for the word-at-a-time patches. This time we really don't even want to export it, because it really is an internal function to fs/dcache.c, and has been since it was introduced. Having it in that extremely hot header file (it's included in pretty much everything, thanks to <linux/fs.h>) is a disaster for testing different versions, and is utterly pointless. We really should have some kind of header file diet thing, where we figure out which parts of header files are really better off private and only result in more expensive compiles. Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6Linus Torvalds authored
SCSI fixes from James Bottomley: "There's just a single fix in here: the osd max device number fix." * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6: [SCSI] osd_uld: Bump MAX_OSD_DEVICES from 64 to 1,048,576
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/parisc-2.6Linus Torvalds authored
PARISC fixes from James Bottomley: "This is a set of build fixes to get the cross compiled architecture testbeds building again" * tag 'parisc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/parisc-2.6: [PARISC] don't unconditionally override CROSS_COMPILE for 64 bit. [PARISC] include <linux/prefetch.h> in drivers/parisc/iommu-helpers.h [PARISC] fix compile break caused by iomap: make IOPORT/PCI mapping functions conditional
-
- 03 Mar, 2012 3 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/x86/kvm: Fix Host-Only/Guest-Only counting with SVM disabled
-
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6Linus Torvalds authored
Pull from Herbert Xu: "This push fixes a bug in mv_cesa that causes all hash operations that supply data on a final operation to fail." * git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: crypto: mv_cesa - fix final callback not ignoring input data
-
Linus Torvalds authored
Commit 5707c87f "vfs: uninline full_name_hash()" broke the modular build, because it needs exporting now that it isn't inlined any more. Reported-by:
Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
- 02 Mar, 2012 20 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-stagingLinus Torvalds authored
hhwmon fixes for 3.3-rc6 from Guenter Roeck: These patches are necessary for correct operation and management of F75387. * tag 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: hwmon: (f75375s) Catch some attempts to write to r/o registers hwmon: (f75375s) Properly map the F75387 automatic modes to pwm_enable hwmon: (f75375s) Make pwm*_mode writable for the F75387 hwmon: (f75375s) Fix writes to the pwm* attribute for the F75387
-
git://github.com/schandinat/linux-2.6Linus Torvalds authored
fbdev fixes for 3.3 from Florian Tobias Schandinat It includes: - two fixes for OMAP HDMI - one fix to make new OMAP functions behave as they are supposed to - one Kconfig dependency fix - two fixes for viafb for modesetting on VX900 hardware * tag 'fbdev-fixes-for-3.3-2' of git://github.com/schandinat/linux-2.6: OMAPDSS: APPLY: make ovl_enable/disable synchronous OMAPDSS: panel-dvi: Add Kconfig dependency on I2C viafb: fix IGA1 modesetting on VX900 viafb: select HW scaling on VX900 for IGA2 OMAPDSS: HDMI: hot plug detect fix OMAPDSS: HACK: Ensure DSS clock domain gets out of idle when HDMI is enabled
-
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/soundLinus Torvalds authored
sound fixes for 3.3-rc6 from Takashi Iwai This contains again regression fixes for various HD-audio and ASoC regarding SSI and dapm shutdown path. In addition, a minor azt3328 fix and the correction of the new jack-notification strings in HD-audio. * tag 'sound-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: hda - Kill hyphenated names ALSA: hda - Add a fake mute feature ALSA: hda - Always set HP pin in unsol handler for STAC/IDT codecs ALSA: azt3328 - Fix NULL ptr dereference on cards without OPL3 ALSA: hda/realtek - Fix resume of multiple input sources ASoC: i.MX SSI: Fix DSP_A format. ASoC: dapm: Check for bias level when powering down
-
Linus Torvalds authored
The code in link_path_walk() that finds out the length and the hash of the next path component is some of the hottest code in the kernel. And I have a version of it that does things at the full width of the CPU wordsize at a time, but that means that we *really* want to split it up into a separate helper function. So this re-organizes the code a bit and splits the hashing part into a helper function called "hash_name()". It returns the length of the pathname component, while at the same time computing and writing the hash to the appropriate location. The code generation is slightly changed by this patch, but generally for the better - and the added abstraction actually makes the code easier to read too. And the new interface is well suited for replacing just the "hash_name()" function with alternative implementations. Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Linus Torvalds authored
It did some odd things for unclear reasons. As this is one of the functions that gets changed when doing word-at-a-time compares, this is yet another of the "don't change any semantics, but clean things up so that subsequent patches don't get obscured by the cleanups". Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Linus Torvalds authored
.. and also use it in lookup_one_len() rather than open-coding it. There aren't any performance-critical users, so inlining it is silly. But it wouldn't matter if it wasn't for the fact that the word-at-a-time dentry name patches want to conditionally replace the function, and uninlining it sets the stage for that. So again, this is a preparatory patch that doesn't change any semantics, and only prepares for a much cleaner and testable word-at-a-time dentry name accessor patch. Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Linus Torvalds authored
These don't change any semantics, but they clean up the code a bit and mark some arguments appropriately 'const'. They came up as I was doing the word-at-a-time dcache name accessor code, and cleaning this up now allows me to send out a smaller relevant interesting patch for the experimental stuff. Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Nikolaus Schulz authored
It makes no sense to attempt to manually configure the fan in auto mode, or set the duty cycle directly in closed loop mode. The corresponding registers are then read-only. If the user tries it nonetheless, error out with EINVAL instead of silently doing nothing. Signed-off-by:
Nikolaus Schulz <mail@microschulz.de> [guenter.roeck@ericsson.com: Minor formatting cleanup] Signed-off-by:
Guenter Roeck <guenter.roeck@ericsson.com>
-
Nikolaus Schulz authored
The F75387 supports automatic fan control using either PWM duty cycle or RPM speed values. Make the driver detect the latter mode, and expose the different modes in sysfs as per pwm_enable, so that the user can switch between them. The interpretation of the pwm_enable attribute for the F75387 is adjusted to be a superset of those values used for similar Fintek chips which do not support automatic duty mode, with 2 mapping to automatic speed mode, and moving automatic duty mode to the new value 4. Toggling the duty mode via pwm_enable is currently denied for the F75387, as the chip then simply reinterprets the fan configuration register values according to the new mode, switching between RPM and PWM units, which makes this a dangerous operation. This patch introduces a new pwm mode into the driver. This is necessary because the new mode (automatic pwm mode, 4) may already be enabled by the BIOS, and the driver should not break existing functionality. This was seen on at least one board. Signed-off-by:
Nikolaus Schulz <mail@microschulz.de> Signed-off-by:
Guenter Roeck <guenter.roeck@ericsson.com>
-
Linus Torvalds authored
Merge branches 'core-urgent-for-linus', 'perf-urgent-for-linus' and 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pulling latest branches from Ingo: * 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: memblock: Fix size aligning of memblock_alloc_base_nid() * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf probe: Ensure offset provided is not greater than function length without DWARF info too perf tools: Ensure comm string is properly terminated perf probe: Ensure offset provided is not greater than function length perf evlist: Return first evsel for non-sample event on old kernel perf/hwbp: Fix a possible memory leak * 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: CPU hotplug, cpusets, suspend: Don't touch cpusets during suspend/resume
-
H. Peter Anvin authored
There is only one error code to return for a bad user-space buffer pointer passed to a system call in the same address space as the system call is executed, and that is EFAULT. Furthermore, the low-level access routines, which catch most of the faults, return EFAULT already. Signed-off-by:
H. Peter Anvin <hpa@zytor.com> Reviewed-by:
Oleg Nesterov <oleg@redhat.com> Acked-by:
Roland McGrath <roland@hack.frob.com> Cc: <stable@vger.kernel.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
H. Peter Anvin authored
The regset common infrastructure assumed that regsets would always have .get and .set methods, but not necessarily .active methods. Unfortunately people have since written regsets without .set methods. Rather than putting in stub functions everywhere, handle regsets with null .get or .set methods explicitly. Signed-off-by:
H. Peter Anvin <hpa@zytor.com> Reviewed-by:
Oleg Nesterov <oleg@redhat.com> Acked-by:
Roland McGrath <roland@hack.frob.com> Cc: <stable@vger.kernel.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Joerg Roedel authored
It turned out that a performance counter on AMD does not count at all when the GO or HO bit is set in the control register and SVM is disabled in EFER. This patch works around this issue by masking out the HO bit in the performance counter control register when SVM is not enabled. The GO bit is not touched because it is only set when the user wants to count in guest-mode only. So when SVM is disabled the counter should not run at all and the not-counting is the intended behaviour. Signed-off-by:
Joerg Roedel <joerg.roedel@amd.com> Signed-off-by:
Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Avi Kivity <avi@redhat.com> Cc: Stephane Eranian <eranian@google.com> Cc: David Ahern <dsahern@gmail.com> Cc: Gleb Natapov <gleb@redhat.com> Cc: Robert Richter <robert.richter@amd.com> Cc: stable@vger.kernel.org # v3.2 Link: http://lkml.kernel.org/r/1330523852-19566-1-git-send-email-joerg.roedel@amd.comSigned-off-by:
Ingo Molnar <mingo@elte.hu>
-
Takashi Iwai authored
Kill hyphens from "Line-Out" name strings, as suggested by Mark Brown. Signed-off-by:
Takashi Iwai <tiwai@suse.de>
-
Ingo Molnar authored
Merge tag 'perf-urgent-for-mingo' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent Various smaller perf/urgent fixes. Signed-off-by:
Ingo Molnar <mingo@elte.hu>
-
git://www.linux-watchdog.org/linux-watchdogLinus Torvalds authored
Watchdog updates from Wim Van Sebroeck: * git://www.linux-watchdog.org/linux-watchdog: watchdog: fix GETTIMEOUT ioctl in booke_wdt watchdog: update maintainers git entry watchdog: Fix typo in pnx4008_wdt.c watchdog: Fix typo in Kconfig watchdog: fix error in probe() of s3c2410_wdt (reset at booting) watchdog: hpwdt: clean up set_memory_x call for 32 bit
-
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulatorLinus Torvalds authored
Pull from Mark Brown: "A simple, driver specific fix. This device isn't widely used outside of Marvell reference boards most of which are probably used with their BSPs rather than with mainline so low risk." * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: regulator: fix the ldo configure according to 88pm860x spec
-
git://git.pengutronix.de/git/wsa/linux-2.6Linus Torvalds authored
i2c bugfix from Wolfram Sang: "This patch fixes a wrong assumption in the mxs-i2c-driver about a command queue being done. Without it, we have seen races when the bus was under load." * 'i2c-embedded/for-3.3' of git://git.pengutronix.de/git/wsa/linux-2.6: i2c: mxs: only flag completion when queue is completely done
-
git://people.freedesktop.org/~airlied/linuxLinus Torvalds authored
DRM fixes from Dave Airlie: intel: fixes for output regression on 965GM, an oops and a machine hang radeon: uninitialised var (that gcc didn't warn about for some reason) + a couple of correctness fixes. exynos: fixes for various things, drop some chunks of unused code. * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: drm/radeon/kms/vm: fix possible bug in radeon_vm_bo_rmv() drm/radeon: fix uninitialized variable drm/radeon/kms: fix radeon_dp_get_modes for LVDS bridges (v2) drm/i915: Remove use of the autoreported ringbuffer HEAD position drm/i915: Prevent a machine hang by checking crtc->active before loading lut drm/i915: fix operator precedence when enabling RC6p drm/i915: fix a sprite watermark computation to avoid divide by zero if xpos<0 drm/i915: fix mode set on load pipe. (v2) drm/exynos: exynos_drm.h header file fixes drm/exynos: added panel physical size. drm/exynos: added postclose to release resource. drm/exynos: removed exynos_drm_fbdev_recreate function. drm/exynos: fixed page flip issue. drm/exynos: added possible_clones setup function. drm/exynos: removed pageflip_event_list init code when closed. drm/exynos: changed priority of mixer layers. drm/exynos: Fix typo in exynos_mixer.c
-
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linuxLinus Torvalds authored
Pull s390 fixes from Martin Schwidefsky * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: [S390] memory hotplug: prevent memory zone interleave [S390] crash_dump: remove duplicate include [S390] KEYS: Enable the compat keyctl wrapper on s390x
-
- 01 Mar, 2012 3 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/soundTakashi Iwai authored
A small fix for the SSI driver and a fix for system shutdown with modern devices. Most of the modern devices will never get shut down normally with a visible kernel log as the systems they're in tend not to shut down often and when they do it's usually in form factors that don't have a user visible console.
-
Tejun Heo authored
memblock allocator aligns @size to @align to reduce the amount of fragmentation. Commit: 7bd0b0f0 ("memblock: Reimplement memblock allocation using reverse free area iterator") Broke it by incorrectly relocating @size aligning to memblock_find_in_range_node(). As the aligned size is not propagated back to memblock_alloc_base_nid(), the actually reserved size isn't aligned. While this increases memory use for memblock reserved array, this shouldn't cause any critical failure; however, it seems that the size aligning was hiding a use-beyond-allocation bug in sparc64 and losing the aligning causes boot failure. The underlying problem is currently being debugged but this is a proper fix in itself, it's already pretty late in -rc cycle for boot failures and reverting the change for debugging isn't difficult. Restore the size aligning moving it to memblock_alloc_base_nid(). Reported-by:
Meelis Roos <mroos@linux.ee> Signed-off-by:
Tejun Heo <tj@kernel.org> Cc: David S. Miller <davem@davemloft.net> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Rob Herring <rob.herring@calxeda.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Link: http://lkml.kernel.org/r/20120228205621.GC3252@dhcp-172-17-108-109.mtv.corp.google.comSigned-off-by:
Ingo Molnar <mingo@elte.hu> LKML-Reference: <alpine.SOC.1.00.1202130942030.1488@math.ut.ee>
-
Mark Brown authored
It should be marked as readable but wasn't, breaking DC servo operation. Signed-off-by:
Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by:
Samuel Ortiz <sameo@linux.intel.com>
-
- 29 Feb, 2012 9 commits
-
-
git://github.com/rustyrussell/linuxLinus Torvalds authored
Merge virtio pull request from Rusty Russell. * tag 'for-linus' of git://github.com/rustyrussell/linux: virtio: balloon: leak / fill balloon across S4
-
Amit Shah authored
commit e562966d added support for S4 to the balloon driver. The freeze function did nothing to free the pages, since reclaiming the pages from the host to immediately give them back (if S4 was successful) seemed wasteful. Also, if S4 wasn't successful, the guest would have to re-fill the balloon. On restore, the pages were supposed to be marked freed and the free page counters were incremented to reflect the balloon was totally deflated. However, this wasn't done right. The pages that were earlier taken away from the guest during a balloon inflation operation were just shown as used pages after a successful restore from S4. Just a fancy way of leaking lots of memory. Instead of trying that, just leak the balloon on freeze and fill it on restore/thaw paths. This works properly now. The optimisation to not leak can be added later on after a bit of refactoring of the code. Signed-off-by:
Amit Shah <amit.shah@redhat.com> Signed-off-by:
Rusty Russell <rusty@rustcorp.com.au>
-
Tomi Valkeinen authored
ovl->enable/disable are meant to be synchronous so that they can handle the configuration of fifo sizes. The current kernel doesn't configure fifo sizes yet, and so the code doesn't need to block to function (from omapdss driver's perspective). However, for the users of omapdss a non-blocking ovl->disable is confusing, because they don't know when the memory area is not used any more. Furthermore, when the fifo size configuration is added in the next merge window, the change from non-blocking to blocking could cause side effects to the users of omapdss. So by making the functions block already will keep them behaving in the same manner. And, while not the main purpose of this patch, this will also remove the compile warning: drivers/video/omap2/dss/apply.c:350: warning: 'wait_pending_extra_info_updates' defined but not used Signed-off-by:
Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by:
Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
-
Tomi Valkeinen authored
panel-dvi uses i2c, but the Kconfig didn't have dependency on I2C. Add it. Signed-off-by:
Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by:
Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
-
Prashanth Nageshappa authored
The 'perf probe' command allows kprobe to be inserted at any offset from a function start, which results in adding kprobes to unintended location. (example: perf probe do_fork+10000 is allowed even though size of do_fork is ~904). My previous patch https://lkml.org/lkml/2012/2/24/42 addressed the case where DWARF info was available for the kernel. This patch fixes the case where perf probe is used on a kernel without debuginfo available. Acked-by:
Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jason Baron <jbaron@redhat.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Andrew Morton <akpm@linux-foundation.org> Link: http://lkml.kernel.org/r/4F4C544D.1010909@linux.vnet.ibm.comSigned-off-by:
Prashanth Nageshappa <prashanth@linux.vnet.ibm.com> Signed-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com>
-
David Ahern authored
If threads in a multi-threaded process have names shorter than the main thread the comm for the named threads is not properly terminated. E.g., for the process 'namedthreads' where each thread is named noploop%d where %d is the thread number: Before: perf script -f comm,tid,ip,sym,dso noploop:4ads 21616 400a49 noploop (/tmp/namedthreads) The 'ads' in the thread comm bleeds over from the process name. After: perf script -f comm,tid,ip,sym,dso noploop:4 21616 400a49 noploop (/tmp/namedthreads) Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1330111898-68071-1-git-send-email-dsahern@gmail.comSigned-off-by:
David Ahern <dsahern@gmail.com> Signed-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com>
-
Prashanth Nageshappa authored
The perf probe command allows kprobe to be inserted at any offset from a function start, which results in adding kprobes to unintended location. Example: perf probe do_fork+10000 is allowed even though size of do_fork is ~904. This patch will ensure probe addition fails when the offset specified is greater than size of the function. Acked-by:
Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Jason Baron <jbaron@redhat.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Link: http://lkml.kernel.org/r/4F473F33.4060409@linux.vnet.ibm.comSigned-off-by:
Prashanth Nageshappa <prashanth@linux.vnet.ibm.com> Signed-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com>
-
Namhyung Kim authored
On old kernels that don't support sample_id_all feature, perf_evlist__id2evsel() returns NULL for non-sampling events. This breaks perf top when multiple events are given on command line. Fix it by using first evsel in the evlist. This will also prevent getting the same (potential) problem in such new tool/ old kernel combo. Suggested-by:
Arnaldo Carvalho de Melo <acme@ghostprotocols.net> Cc: Ingo Molnar <mingo@elte.hu> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1329702447-25045-1-git-send-email-namhyung.kim@lge.comSigned-off-by:
Namhyung Kim <namhyung.kim@lge.com> Signed-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds authored
Arnd Bergmann says: "Another set of arm-soc bug fixes on top of v3.3-rc5. The few larger bits are all for devices that still need to get set up in board code. Only three platforms are in this set of fixes: omap2+, pxa and lpc32xx." * tag 'fixes-3.3-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (22 commits) ARM: LPC32xx: serial.c: Fixed loop limit ARM: LPC32xx: serial.c: HW bug workaround ARM: LPC32xx: irq.c: Clear latched event ARM: LPC32xx: Fix interrupt controller init ARM: LPC32xx: Fix irq on GPI_28 ARM: OMAP2: fix mailbox init code ARM: OMAP2+: gpmc-smsc911x: add required smsc911x regulators ARM: OMAP1: Fix out-of-bounds array access for Innovator OMAP3 EVM: remove out-of-bounds array access of gpio_leds ARM: OMAP: Fix build error when mmc_omap is built as module ARM: OMAP: Fix kernel panic with HSMMC when twl4030_gpio is a module pxa/hx4700: add platform device and I2C info for AK4641 codec arch/arm/mach-pxa/: included linux/gpio.h twice arch/arm/mach-mmp/: some files include some headers twice ARM: pxa: fix error handling in pxa2xx_drv_pcmcia_probe ARM: pxa: fix including linux/gpio.h twice ARM: pxa: fix mixed declarations and code in sharpsl_pm ARM: pxa: fix wrong parsing gpio event on spitz ARM: OMAP2+: usb-host: fix compile warning ARM: OMAP4: Move the barrier memboclk_steal() as part of reserve callback ...
-