- 10 Jun, 2009 1 commit
-
-
Simos Xenitellis authored
A quirk is required for 8086:284b (rev 03) [Subsystem: 161f:2073]. The following has been tested with Alsa 1.0.20 (git master). Background details can be found at https://bugtrack.alsa-project.org/alsa-bug/view.php?id=4561 http://forum.ubuntu-gr.org/viewtopic.php?f=38&t=5290Tested-by: Theodora Iliopoulou <th30dr@gmail.com> Signed-off-by: Simos Xenitellis <simos@gnome.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
- 08 Jun, 2009 2 commits
-
-
Takashi Iwai authored
- Fix a typo in the patch - Adapted to follow the recent change for unsol event handling Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
David Heidelberger authored
Added 7.1 support for MSI GX620 and jack quirk. Reference: kernel bug#13430 http://bugzilla.kernel.org/show_bug.cgi?id=13430Signed-off-by: David Heidelberger <d.okias@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
- 05 Jun, 2009 1 commit
-
-
Guido Günther authored
with BIOS probing only we offer a non functional headphone swith and volume slider. Signed-off-by: Guido Günther <agx@sigxcpu.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
- 04 Jun, 2009 1 commit
-
-
Alexander Beregalov authored
Fix this build error when CONFIG_PM is not set: ound/pci/hda/hda_intel.c: In function 'azx_bus_reset': sound/pci/hda/hda_intel.c:1270: error: implicit declaration of function 'snd_pcm_suspend_all' sound/pci/hda/hda_intel.c:1271: error: implicit declaration of function 'snd_hda_suspend' sound/pci/hda/hda_intel.c:1272: error: implicit declaration of function 'snd_hda_resume' Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
- 03 Jun, 2009 1 commit
-
-
Hector Martin authored
Enable all three capture channels, including the missing nid 7 which is the only one capable of capturing DMIC input Enable Headphone amp for the HP jack. This causes a volume boost for headphones, but does not cause any noticeable effect for light loads like other amps, so there is no need to make it configurable. Add Input Mix capture mux setting to capture the output of the playback input mux (that is, what goes out the speakers except for PCM) Hack another coef register because the stereo DMIC for some reason produces a nonstandard sum/difference signal. I found a bit to make it just use the sum signal for both channels, which makes it behave like a standard mono microphone. The stereo is useless anyway (they're 1cm apart). Tested working: Three capture channels, mic in, line in, DMIC. Tested not working: CD. Not sure why, might be unconnected in the actual hardware or a CD drive issue. Also looked at SPDIF. It appears to work (emitter lights up inside the HP out jack) but I lack a proper miniTOSLINK cable to test it. Signed-off-by: Hector Martin <hector@marcansoft.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
- 02 Jun, 2009 2 commits
-
-
Takashi Iwai authored
-
Hector Martin authored
Short story: this laptop has 5.1 built-in speakers which you *really* want to use (the not-so-"sub" woofer is what makes the audio above average for a laptop), so 6-channel support is important (plus a decent asound.conf to upmix stereo). It also has the 3 typical jacks that ought to have a selectable mode. And it's based on ALC889, which sucks. Rationale/explanations: The const_channel_count stuff was added because, for a laptop like this, you always have 6 channels available (internal speakers) but still need to set the mode for the 3 external jacks. Therefore, the device always needs to be in 6-channel mode but there still needs to be a mixer control for the jack mode. You could use line/mic-in at the same time as the 6 internal speakers, for example. You might be tempted to make it even smarter by dynamically switching the max channel count when headphones are plugged in (therefore muting the internal speakers and reducing the physical channel count to the jack channel mode), but as a user I consider this to be harmful because I want the audio to blow up to 6 channels / upmixed as soon as I unplug the headphones, and having opened the device while in 2-channel mode would prevent this from working (and always making 6-channel mode available doesn't do any harm). The hardware needs EAPD turned on and the DACs routed to the internal speaker pins, so the patch adds those verbs. The ALC889 CLFE and subsequent (side/aux, here unused) DACs do NOT work by default, at least here. I wasted much time trying to talk to Realtek/pshou about this, but they just kept sending me useless updates to patch_realtek.c that did nothing relevant. In the end I gave up and brute forced the issue by trying to flip every bit in the proprietary coefficient registers, and eventually found the two magic registers that need to be cleared to enable all DACs. I have only heard Acer users complain, but that might be because ALC889 is pretty new and using 5.1 (and noticing the missing center/lfe channels) might not be that common. If this is a generalized issue with all ALC889 systems then those verbs should probably be moved to a common verb array. The internal mic is untested and probably doesn't work. These settings will probably work for other Acer Gemstone laptops with the same 5.1 speaker config. When identified, those should be added to the PCI subsystem ID list. Signed-off-by: Hector Martin <hector@marcansoft.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
- 01 Jun, 2009 8 commits
-
-
Takashi Iwai authored
The reset of a BUS controller during operations is somehow risky and shouldn't be done inevitably for devices that have apparently no such codec-communication problems. This patch adds the check of the hardware and limits the bus-reset capability. Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
Some machines machine cause a severe CORB/RIRB stall in certain weird conditions, such as PA access at the start up together with fglrx driver. This seems unable to be recovered without the controller reset. This patch allows the bus controller reset at critical errors so that the communication gets recovered again. Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
Rearrange alc268_cfg_tbl[] in the order of vendor id, and group some entries using SND_PCI_QUIRK_MASK(). Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Ozan Çağlayan authored
Currently, LG R510 is only able to produce sound on headphones, the internal speakers are not working. The user tested and confirmed that with model=Dell headphones, internal speakers and the microphone are working flawlessly. Tested-by: Serdar Soytetir <tulliana@gmail.com> Signed-off-by: Ozan Çağlayan <ozan@pardus.org.tr> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Kacper Szczesniak authored
this is a patch against current snapshot that adds: 6 channels support for the MB5 model Signed-off-by: Kacper Szczesniak <kacper@qwe.pl> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Jaroslav Kysela authored
Fix issues for 3 generations of HP workstations. The modest modifications do the following: 1. Change the second MIC from device 3 to device 1 2. Init the "boost" values to "0" by default From: John Brown <john.brown3@hp.com> Signed-off-by: Jaroslav Kysela <perex@perex.cz> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Nickolas Lloyd authored
This patch changes Line In as Out Switch and Mic In as Out Switch to enums for consistency, and causes all mic and line in ports to be probed and controls to be added appropriately. Signed-off-by: Nickolas Lloyd <ultrageek.lloyd@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Wei Ni authored
Support 8 channel HDMI audio for MCP78/7A Signed-off-by: Wei Ni <wni@nvidia.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
- 31 May, 2009 1 commit
-
-
Takashi Iwai authored
ICH6_GCTL_RESET was wrongly set to another bit by the commit b21fadb9. This caused a problem when the codec needs really a reset (e.g. recovering from the communication error at probe). Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
- 30 May, 2009 1 commit
-
-
Takashi Iwai authored
The commit 86d190e7 reverted the bit flip of LED GPIO for HP DX and DV4-1222nr. Fixed now. Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
- 28 May, 2009 4 commits
-
-
Takashi Iwai authored
-
Takashi Iwai authored
Added some missing register bits definitions to reduce magic numbers. Also renamed some to follow the names on the datasheet. Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
In the single_cmd mode, the hardware cannot store the multiple replies like on RIRB, thus each verb has to sync and wait for the response no matter whether the return value is needed or not. Otherwise it may result in a wrong return value from the previous verb. Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Tony Vroon authored
A docking mic control is shown by default. The Compaq Presario CQ60 laptop has no docking connector, so designate it as a CXT5051_HP model. This makes the phantom mixer slider disappear. Signed-off-by: Tony Vroon <tony@linx.net> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
- 26 May, 2009 4 commits
-
-
Takashi Iwai authored
This patch adds a debug mode to make the codec communication synchronous. Define SND_HDA_SUPPORT_SYNC_WRITE in hda_codec.c, and the call of snd_hda_codec_write*() will become synchronous, i.e. wait for the reply from the codec at each time issuing a verb. Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
In the single_cmd mode, the current driver code doesn't do any update for RIRB just for any safety reason. But, actually the RIRB and single_cmd mode don't conflict. Unsolicited events can be delivered even while using the single_cmd mode. This patch allows the handling of unsolicited events with single_cmd mode, just always checking RIRB independent from single_cmd flag. Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
-
Takashi Iwai authored
- Remove unneeded semicolons - Introduce spec->gpio_led to specify the GPIO bit for LED control Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
- 25 May, 2009 2 commits
-
-
Takashi Iwai authored
When a codec communication error occurs, the CORB/RIRB counters should be reset first before re-issuing the verb. Simply call azx_free_cmd_io() and azx_init_cmd_io() to achieve that. Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
Some Realtek codecs like ALC861 seem to support only VREF50 while the current driver assumes it's only VREF80. Check other VREF bits to set the correct value. Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
- 24 May, 2009 2 commits
-
-
Takashi Iwai authored
The recent fix for the headphone volume control on IDT/STAC codecs resulted in the removal of invalid "Side" volume eventually. But, if the front panel doesn't exist, this setup could be regarded as a sort of regression, as reported in kernel bug #13250. Now as a workaround, a new model 5stack-no-fp is added so that the user without the front panel can choose this one explicitly. Reference: bko#13250 http://bugzilla.kernel.org/show_bug.cgi?id=13250Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Ozan Çağlayan authored
ASUS W5Fm needs the fixed codec-slots to probe to override the BIOS problem like W5F. Tested-by: Alp Kılıç <kilic.alp@gmail.com> Signed-off-by: Ozan Çağlayan <ozan@pardus.org.tr> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
- 22 May, 2009 1 commit
-
-
Adam Williamson authored
Fixes https://bugtrack.alsa-project.org/alsa-bug/view.php?id=4121 Taken from https://bugzilla.redhat.com/show_bug.cgi?id=498060Signed-off-by: Adam Williamson <awilliam@redhat.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
- 19 May, 2009 2 commits
-
-
Takashi Iwai authored
The digital beep tone is calculated in two different ways depending on the codec chip. The standard one is using a divider, and another one is a linear tone for IDT/STAC codecs. Currently, only the latter type is used for all codecs, which resulted in a wrong tone pitch. This patch adds the calculation of the standard HD-audio type. Also clean-up the fields in hda_beep struct. Reference: bko#13162 http://bugzilla.kernel.org/show_bug.cgi?id=13162Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
Add proper prefix to each kernel message in hda_intel.c. Also, avoid the unneeded prefix when CONFIG_SND_VERBOSE_PRINTK is used together with snd_print*(). Reference: bko#13207 http://bugzilla.kernel.org/show_bug.cgi?id=13207Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
- 18 May, 2009 3 commits
-
-
Torben Schulz authored
This patch adds support for MacBook 3,1 sound by adding a model new "mb31" with the appropriate init verbs, mixers and channel modes to the ALC883 configuration. patch_alc882() and patch_alc883() are modified to handle the MacBook 3,1 sound-chip (Realtek ALC889A) correctly. Signed-off-by: Torben Schulz <public@letorbi.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
The PCI entries of Creative with HD-audio class can be the devices with emu20k1/emu20k2 chips. These are supported better by snd-ctxfi driver. With that driver, the device will mutate from HD-audio to its native class. This patch adds a simple ifdef to avoid the conflict of device probe between snd-hda-intel and snd-ctxfi drivers. 1102:0009 seems still OK to be added as it has no emu20kx chip, and is a pure HD-audio device. Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
Show the actual chip name in 'unknown model..' info messages for Realtek codecs. Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
- 16 May, 2009 1 commit
-
-
Takashi Iwai authored
Split the name string in hda_codec struct to vendor_name and chip_name strings to be stored directly from the preset name. Since mostly only the chip name is referred in many patch_*.c, this results in the reduction of many codes in the end. Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
- 15 May, 2009 1 commit
-
-
Nickolas Lloyd authored
This patch adds a mixer control for the STAC92XX boards to control the DC bias of mic ports, allowing recording from both powered and non-powered sources. It replaces the "Mic Output Switch" with "Mic Jack Mode" to switch between Mic, Line In, and Line Out. Signed-off-by: Nickolas Lloyd <ultrageek.lloyd@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
- 14 May, 2009 1 commit
-
-
Takashi Iwai authored
Added the codec SSID for MacBook Pro 5,1 as compatible as MP51. However, the headphone auto-muting function doesn't work. So, this is just a tentative solution. Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
- 13 May, 2009 1 commit
-
-
Takashi Iwai authored
The model=acer for ALC883/889 doesn't work well for the recent Acer Aspire laptops. Since model=auto works better nowadays, it's safer to use the default fallback instead of the Acer specific one. Signed-off-by: Takashi Iwai <tiwai@suse.de>
-