- 26 Sep, 2018 40 commits
-
-
Xiao Liang authored
[ Upstream commit 21f2706b ] There is a call trace generated after commit 2d408c0d( xen-netfront: fix queue name setting). There is no 'device/vif/xx-q0-tx' file found under /proc/irq/xx/. This patch only picks up device type and id as its name. With the patch, now /proc/interrupts looks like below and the warning message gone: 70: 21 0 0 0 xen-dyn -event vif0-q0-tx 71: 15 0 0 0 xen-dyn -event vif0-q0-rx 72: 14 0 0 0 xen-dyn -event vif0-q1-tx 73: 33 0 0 0 xen-dyn -event vif0-q1-rx 74: 12 0 0 0 xen-dyn -event vif0-q2-tx 75: 24 0 0 0 xen-dyn -event vif0-q2-rx 76: 19 0 0 0 xen-dyn -event vif0-q3-tx 77: 21 0 0 0 xen-dyn -event vif0-q3-rx Below is call trace information without this patch: name 'device/vif/0-q0-tx' WARNING: CPU: 2 PID: 37 at fs/proc/generic.c:174 __xlate_proc_name+0x85/0xa0 RIP: 0010:__xlate_proc_name+0x85/0xa0 RSP: 0018:ffffb85c40473c18 EFLAGS: 00010286 RAX: 0000000000000000 RBX: 0000000000000006 RCX: 0000000000000006 RDX: 0000000000000007 RSI: 0000000000000096 RDI: ffff984c7f516930 RBP: ffffb85c40473cb8 R08: 000000000000002c R09: 0000000000000229 R10: 0000000000000000 R11: 0000000000000001 R12: ffffb85c40473c98 R13: ffffb85c40473cb8 R14: ffffb85c40473c50 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffff984c7f500000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f69b6899038 CR3: 000000001c20a006 CR4: 00000000001606e0 Call Trace: __proc_create+0x45/0x230 ? snprintf+0x49/0x60 proc_mkdir_data+0x35/0x90 register_handler_proc+0xef/0x110 ? proc_register+0xfc/0x110 ? proc_create_data+0x70/0xb0 __setup_irq+0x39b/0x660 ? request_threaded_irq+0xad/0x160 request_threaded_irq+0xf5/0x160 ? xennet_tx_buf_gc+0x1d0/0x1d0 [xen_netfront] bind_evtchn_to_irqhandler+0x3d/0x70 ? xenbus_alloc_evtchn+0x41/0xa0 netback_changed+0xa46/0xcda [xen_netfront] ? find_watch+0x40/0x40 xenwatch_thread+0xc5/0x160 ? finish_wait+0x80/0x80 kthread+0x112/0x130 ? kthread_create_worker_on_cpu+0x70/0x70 ret_from_fork+0x35/0x40 Code: 81 5c 00 48 85 c0 75 cc 5b 49 89 2e 31 c0 5d 4d 89 3c 24 41 5c 41 5d 41 5e 41 5f c3 4c 89 ee 48 c7 c7 40 4f 0e b4 e8 65 ea d8 ff <0f> 0b b8 fe ff ff ff 5b 5d 41 5c 41 5d 41 5e 41 5f c3 66 0f 1f ---[ end trace 650e5561b0caab3a ]--- Signed-off-by:
Xiao Liang <xiliang@redhat.com> Reviewed-by:
Juergen Gross <jgross@suse.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Sasha Levin <alexander.levin@microsoft.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Joerg Roedel authored
[ Upstream commit 935232ce ] The addr counter will overflow if the last PMD of the address space is cloned, resulting in an endless loop. Check for that and bail out of the loop when it happens. Signed-off-by:
Joerg Roedel <jroedel@suse.de> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Tested-by:
Pavel Machek <pavel@ucw.cz> Cc: "H . Peter Anvin" <hpa@zytor.com> Cc: linux-mm@kvack.org Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andy Lutomirski <luto@kernel.org> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Juergen Gross <jgross@suse.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Brian Gerst <brgerst@gmail.com> Cc: David Laight <David.Laight@aculab.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Eduardo Valentin <eduval@amazon.com> Cc: Greg KH <gregkh@linuxfoundation.org> Cc: Will Deacon <will.deacon@arm.com> Cc: aliguori@amazon.com Cc: daniel.gruss@iaik.tugraz.at Cc: hughd@google.com Cc: keescook@google.com Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Waiman Long <llong@redhat.com> Cc: "David H . Gutteridge" <dhgutteridge@sympatico.ca> Cc: joro@8bytes.org Link: https://lkml.kernel.org/r/1531906876-13451-25-git-send-email-joro@8bytes.orgSigned-off-by:
-
Jiang Biao authored
[ Upstream commit 8c934e01 ] pti_user_pagetable_walk_pmd() can return NULL, so the return value should be checked to prevent a NULL pointer dereference. Add the check and a warning when the PMD allocation fails. Signed-off-by:
Jiang Biao <jiang.biao2@zte.com.cn> Signed-off-by:
-
Jiang Biao authored
[ Upstream commit b2b7d986 ] pti_user_pagetable_walk_p4d() can return NULL, so the return value should be checked to prevent a NULL pointer dereference. Add the check and a warning when the P4D allocation fails. Signed-off-by:
-
Michael Müller authored
[ Upstream commit 0e7d4d93 ] This patch fixes two typos related to unregistering algorithms supported by SAHARAH 3. In sahara_register_algs the wrong algorithms are unregistered in case of an error. In sahara_unregister_algs the wrong array is used to determine the iteration count. Signed-off-by:
Michael Müller <michael@fds-team.de> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
Hanna Hawa authored
[ Upstream commit 8bbafed8 ] The mv_xor_v2 driver uses a tasklet, initialized during the probe() routine. However, it forgets to cleanup the tasklet using tasklet_kill() function during the remove() routine, which this patch fixes. This prevents the tasklet from potentially running after the module has been removed. Fixes: 19a340b1 ("dmaengine: mv_xor_v2: new driver") Signed-off-by:
Hanna Hawa <hannah@marvell.com> Reviewed-by:
Thomas Petazzoni <thomas.petazzoni@bootlin.com> Signed-off-by:
Vinod Koul <vkoul@kernel.org> Signed-off-by:
-
Jae Hyun Yoo authored
[ Upstream commit 517fde0e ] This patch changes the order of enum aspeed_i2c_master_state and enum aspeed_i2c_slave_state defines to make their initial value to ASPEED_I2C_MASTER_INACTIVE and ASPEED_I2C_SLAVE_STOP respectively. In case of multi-master use, if a slave data comes ahead of the first master xfer, master_state starts from an invalid state so this change fixes the issue. Signed-off-by:
Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com> Reviewed-by:
Brendan Higgins <brendanhiggins@google.com> Signed-off-by:
Wolfram Sang <wsa@the-dreams.de> Signed-off-by:
-
Pingfan Liu authored
[ Upstream commit 3297c8fc ] There is a race window in device_shutdown(), which may cause -1. parent device shut down before child or -2. no shutdown on a new probing device. For 1st, taking the following scenario: device_shutdown new plugin device list_del_init(parent_dev); spin_unlock(list_lock); device_add(child) probe child shutdown parent_dev --> now child is on the tail of devices_kset For 2nd, taking the following scenario: device_shutdown new plugin device device_add(dev) device_lock(dev); ... device_unlock(dev); probe dev --> now, the new occurred dev has no opportunity to shutdown To fix this race issue, just prevent the new probing request. With this logic, device_shutdown() is more similar to dpm_prepare(). Signed-off-by:
Pingfan Liu <kernelfans@gmail.com> Reviewed-by:
Rafael J. Wysocki <rafael@kernel.org> Signed-off-by:
-
Christoffer Dall authored
[ Upstream commit 1d47191d ] The vgic_init function can race with kvm_arch_vcpu_create() which does not hold kvm_lock() and we therefore have no synchronization primitives to ensure we're doing the right thing. As the user is trying to initialize or run the VM while at the same time creating more VCPUs, we just have to refuse to initialize the VGIC in this case rather than silently failing with a broken VCPU. Reviewed-by:
Eric Auger <eric.auger@redhat.com> Signed-off-by:
Christoffer Dall <christoffer.dall@arm.com> Signed-off-by:
Marc Zyngier <marc.zyngier@arm.com> Signed-off-by:
-
Randy Dunlap authored
[ Upstream commit c2e2a618 ] Fix a build warning in toshiba_acpi.c when CONFIG_PROC_FS is not enabled by marking the unused function as __maybe_unused. ../drivers/platform/x86/toshiba_acpi.c:1685:12: warning: 'version_proc_show' defined but not used [-Wunused-function] Signed-off-by:
Randy Dunlap <rdunlap@infradead.org> Cc: Azael Avalos <coproscefalo@gmail.com> Cc: platform-driver-x86@vger.kernel.org Cc: Andy Shevchenko <andy@infradead.org> Signed-off-by:
Darren Hart (VMware) <dvhart@infradead.org> Signed-off-by:
-
Julian Wiedmann authored
[ Upstream commit 70551dc4 ] After the subdriver's remove() routine has completed, the card's layer mode is undetermined again. Reflect this in the layer2 field. If qeth_dev_layer2_store() hits an error after remove() was called, the card _always_ requires a setup(), even if the previous layer mode is requested again. But qeth_dev_layer2_store() bails out early if the requested layer mode still matches the current one. So unless we reset the layer2 field, re-probing the card back to its previous mode is currently not possible. Signed-off-by:
Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by:
-
Julian Wiedmann authored
[ Upstream commit a702349a ] By updating q->used_buffers only _after_ do_QDIO() has completed, there is a potential race against the buffer's TX completion. In the unlikely case that the TX completion path wins, qeth_qdio_output_handler() would decrement the counter before qeth_flush_buffers() even incremented it. Signed-off-by:
-
Bhushan Shah authored
[ Upstream commit 03864e57 ] The kernel would not boot on the hammerhead hardware due to the following error: mmc0: Timeout waiting for hardware interrupt. mmc0: sdhci: ============ SDHCI REGISTER DUMP =========== mmc0: sdhci: Sys addr: 0x00000200 | Version: 0x00003802 mmc0: sdhci: Blk size: 0x00000200 | Blk cnt: 0x00000200 mmc0: sdhci: Argument: 0x00000000 | Trn mode: 0x00000023 mmc0: sdhci: Present: 0x03e80000 | Host ctl: 0x00000034 mmc0: sdhci: Power: 0x00000001 | Blk gap: 0x00000000 mmc0: sdhci: Wake-up: 0x00000000 | Clock: 0x00000007 mmc0: sdhci: Timeout: 0x0000000e | Int stat: 0x00000000 mmc0: sdhci: Int enab: 0x02ff900b | Sig enab: 0x02ff100b mmc0: sdhci: AC12 err: 0x00000000 | Slot int: 0x00000000 mmc0: sdhci: Caps: 0x642dc8b2 | Caps_1: 0x00008007 mmc0: sdhci: Cmd: 0x00000c1b | Max curr: 0x00000000 mmc0: sdhci: Resp[0]: 0x00000c00 | Resp[1]: 0x00000000 mmc0: sdhci: Resp[2]: 0x00000000 | Resp[3]: 0x00000000 mmc0: sdhci: Host ctl2: 0x00000008 mmc0: sdhci: ADMA Err: 0x00000000 | ADMA Ptr: 0x70040220 mmc0: sdhci: ============================================ mmc0: Card stuck in wrong state! mmcblk0 card_busy_detect status: 0xe00 mmc0: cache flush error -110 mmc0: Reset 0x1 never completed. This patch increases the load on l20 to 0.2 amps for the sdhci and allows the device to boot normally. Signed-off-by:
Bhushan Shah <bshah@kde.org> Signed-off-by:
Brian Masney <masneyb@onstation.org> Suggested-by:
Bjorn Andersson <bjorn.andersson@linaro.org> Tested-by:
Andy Gross <andy.gross@linaro.org> Signed-off-by:
-
Loic Poulain authored
[ Upstream commit e53db018 ] Current LED trigger, 'bt', is not known/used by any existing driver. Fix this by renaming it to 'bluetooth-power' trigger which is controlled by the Bluetooth subsystem. Fixes: 9943230c ("arm64: dts: qcom: Add apq8016-sbc board LED's related device nodes") Signed-off-by:
Loic Poulain <loic.poulain@linaro.org> Signed-off-by:
-
Vitaly Kuznetsov authored
[ Upstream commit 2d408c0d ] Commit f599c64f ("xen-netfront: Fix race between device setup and open") changed the initialization order: xennet_create_queues() now happens before we do register_netdev() so using netdev->name in xennet_init_queue() is incorrect, we end up with the following in /proc/interrupts: 60: 139 0 xen-dyn -event eth%d-q0-tx 61: 265 0 xen-dyn -event eth%d-q0-rx 62: 234 0 xen-dyn -event eth%d-q1-tx 63: 1 0 xen-dyn -event eth%d-q1-rx and this looks ugly. Actually, using early netdev name (even when it's already set) is also not ideal: nowadays we tend to rename eth devices and queue name may end up not corresponding to the netdev name. Use nodename from xenbus device for queue naming: this can't change in VM's lifetime. Now /proc/interrupts looks like 62: 202 0 xen-dyn -event device/vif/0-q0-tx 63: 317 0 xen-dyn -event device/vif/0-q0-rx 64: 262 0 xen-dyn -event device/vif/0-q1-tx 65: 17 0 xen-dyn -event device/vif/0-q1-rx Fixes: f599c64f ("xen-netfront: Fix race between device setup and open") Signed-off-by:
Vitaly Kuznetsov <vkuznets@redhat.com> Reviewed-by:
Ross Lagerwall <ross.lagerwall@citrix.com> Signed-off-by:
-
Jakub Kicinski authored
[ Upstream commit 07300f77 ] After device is stopped we reset the rings by moving all free buffers to positions [0, cnt - 2], and clear the position cnt - 1 in the ring. We then proceed to clear the read/write pointers. This means that if we try to reset the ring again the code will assume that the next to fill buffer is at position 0 and swap it with cnt - 1. Since we previously cleared position cnt - 1 it will lead to leaking the first buffer and leaving ring in a bad state. This scenario can only happen if FW communication fails, in which case the ring will never be used again, so the fact it's in a bad state will not be noticed. Buffer leak is the only problem. Don't try to move buffers in the ring if the read/write pointers indicate the ring was never used or have already been reset. nfp_net_clear_config_and_disable() is now fully idempotent. Found by code inspection, FW communication failures are very rare, and reconfiguring a live device is not common either, so it's unlikely anyone has ever noticed the leak. Signed-off-by:
Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by:
Dirk van der Merwe <dirk.vandermerwe@netronome.com> Signed-off-by:
-
Ard Biesheuvel authored
[ Upstream commit 3ea86495 ] The BGRT code validates the contents of the table against the UEFI memory map, and so it expects it to be mapped when the code runs. On ARM, this is currently not the case, since we tear down the early mapping after efi_init() completes, and only create the permanent mapping in arm_enable_runtime_services(), which executes as an early initcall, but still leaves a window where the UEFI memory map is not mapped. So move the call to efi_memmap_unmap() from efi_init() to arm_enable_runtime_services(). Signed-off-by:
Ard Biesheuvel <ard.biesheuvel@linaro.org> [will: fold in EFI_MEMMAP attribute check from Ard] Signed-off-by:
Will Deacon <will.deacon@arm.com> Signed-off-by:
-
Leonard Crestez authored
[ Upstream commit 26fce055 ] Right now the only user of reset-imx7 is pci-imx6 and the reset_control_assert and deassert calls on pciephy_reset don't toggle the PCIEPHY_BTN and PCIEPHY_G_RST bits as expected. Fix this by writing 1 or 0 respectively. The reference manual is not very clear regarding SRC_PCIEPHY_RCR but for other registers like MIPIPHY and HSICPHY the bits are explicitly documented as "1 means assert, 0 means deassert". The values are still reversed for IMX7_RESET_PCIE_CTRL_APPS_EN. Signed-off-by:
Leonard Crestez <leonard.crestez@nxp.com> Reviewed-by:
Lucas Stach <l.stach@pengutronix.de> Signed-off-by:
Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by:
-
Mark Rutland authored
[ Upstream commit 14d6e289 ] It's possible for userspace to control idx. Sanitize idx when using it as an array index, to inhibit the potential spectre-v1 write gadget. Found by smatch. Signed-off-by:
Mark Rutland <mark.rutland@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by:
-
YueHaibing authored
[ Upstream commit fd800f64 ] qe_muram_alloc return a unsigned long integer,which should not compared with zero. check it using IS_ERR_VALUE() to fix this. Fixes: c19b6d24 ("drivers/net: support hdlc function for QE-UCC") Signed-off-by:
YueHaibing <yuehaibing@huawei.com> Signed-off-by:
-
Piotr Sawicki authored
[ Upstream commit 129a9989 ] A socket which has sk_family set to PF_INET6 is able to receive not only IPv6 but also IPv4 traffic (IPv4-mapped IPv6 addresses). Prior to this patch, the smk_skb_to_addr_ipv6() could have been called for socket buffers containing IPv4 packets, in result such traffic was allowed. Signed-off-by:
Piotr Sawicki <p.sawicki2@partner.samsung.com> Signed-off-by:
Casey Schaufler <casey@schaufler-ca.com> Signed-off-by:
-
Manikanta Pubbisetty authored
[ Upstream commit 133bf90d ] As explained in ieee80211_delayed_tailroom_dec(), during roam, keys of the old AP will be destroyed and new keys will be installed. Deletion of the old key causes crypto_tx_tailroom_needed_cnt to go from 1 to 0 and the new key installation causes a transition from 0 to 1. Whenever crypto_tx_tailroom_needed_cnt transitions from 0 to 1, we invoke synchronize_net(); the reason for doing this is to avoid a race in the TX path as explained in increment_tailroom_need_count(). This synchronize_net() operation can be slow and can affect the station roam time. To avoid this, decrementing the crypto_tx_tailroom_needed_cnt is delayed for a while so that upon installation of new key the transition would be from 1 to 2 instead of 0 to 1 and thereby improving the roam time. This is all correct for a STA iftype, but deferring the tailroom_needed decrement for other iftypes may be unnecessary. For example, let's consider the case of a 4-addr client connecting to an AP for which AP_VLAN interface is also created, let the initial value for tailroom_needed on the AP be 1. * 4-addr client connects to the AP (AP: tailroom_needed = 1) * AP will clear old keys, delay decrement of tailroom_needed count * AP_VLAN is created, it takes the tailroom count from master (AP_VLAN: tailroom_needed = 1, AP: tailroom_needed = 1) * Install new key for the station, assume key is plumbed in the HW, there won't be any change in tailroom_needed count on AP iface * Delayed decrement of tailroom_needed count on AP (AP: tailroom_needed = 0, AP_VLAN: tailroom_needed = 1) Because of the delayed decrement on AP iface, tailroom_needed count goes out of sync between AP(master iface) and AP_VLAN(slave iface) and there would be unnecessary tailroom created for the packets going through AP_VLAN iface. Also, WARN_ONs were observed while trying to bring down the AP_VLAN interface: (warn_slowpath_common) (warn_slowpath_null+0x18/0x20) (warn_slowpath_null) (ieee80211_free_keys+0x114/0x1e4) (ieee80211_free_keys) (ieee80211_del_virtual_monitor+0x51c/0x850) (ieee80211_del_virtual_monitor) (ieee80211_stop+0x30/0x3c) (ieee80211_stop) (__dev_close_many+0x94/0xb8) (__dev_close_many) (dev_close_many+0x5c/0xc8) Restricting delayed decrement to station interface alone fixes the problem and it makes sense to do so because delayed decrement is done to improve roam time which is applicable only for client devices. Signed-off-by:
Manikanta Pubbisetty <mpubbise@codeaurora.org> Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
-
Paul Cercueil authored
[ Upstream commit c6ea7e97 ] Having the zload address at 0x8060.0000 means the size of the uncompressed kernel cannot be bigger than around 6 MiB, as it is deflated at address 0x8001.0000. This limit is too small; a kernel with some built-in drivers and things like debugfs enabled will already be over 6 MiB in size, and so will fail to extract properly. To fix this, we bump the zload address from 0x8060.0000 to 0x8100.0000. This is fine, as all the boards featuring Ingenic JZ SoCs have at least 32 MiB of RAM, and use u-boot or compatible bootloaders which won't hardcode the load address but read it from the uImage's header. Signed-off-by:
Paul Cercueil <paul@crapouillou.net> Signed-off-by:
Paul Burton <paul.burton@mips.com> Patchwork: https://patchwork.linux-mips.org/patch/19787/ Cc: Ralf Baechle <ralf@linux-mips.org> Cc: James Hogan <jhogan@kernel.org> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Signed-off-by:
-
Oder Chiou authored
[ Upstream commit d96f8bd2 ] The patch fixes the issue of the delay volume applied. Signed-off-by:
Oder Chiou <oder_chiou@realtek.com> Signed-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
-
Nicholas Mc Guire authored
[ Upstream commit 5b70084f ] wait_for_completion_timeout returns unsigned long not int so a variable of proper type is introduced. Further the check for <= 0 is ambiguous and should be == 0 here indicating timeout. Signed-off-by:
Nicholas Mc Guire <hofrat@osadl.org> Fixes: 7b3ad5ab ("staging: Import the BCM2835 MMAL-based V4L2 camera driver.") Signed-off-by:
-
Nicholas Mc Guire authored
[ Upstream commit b7afce51 ] wait_for_completion_timeout returns unsigned long not int so a variable of proper type is introduced. Further the check for <= 0 is ambiguous and should be == 0 here indicating timeout which is the only error case so no additional check needed here. Signed-off-by:
-
Nicholas Piggin authored
[ Upstream commit bd90284c ] The intention here is to consume and discard the remaining buffer upon error. This works if there has not been a previous partial write. If there has been, then total_len is no longer total number of bytes to copy. total_len is always "bytes left to copy", so it should be added to written bytes. This code may not be exercised any more if partial writes will not be hit, but this is a small bugfix before a larger change. Reviewed-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by:
Nicholas Piggin <npiggin@gmail.com> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
-
Mark Rutland authored
[ Upstream commit 6b8b9a48 ] It's possible for userspace to control n. Sanitize n when using it as an array index, to inhibit the potential spectre-v1 write gadget. Note that while it appears that n must be bound to the interval [0,3] due to the way it is extracted from addr, we cannot guarantee that compiler transformations (and/or future refactoring) will ensure this is the case, and given this is a slow path it's better to always perform the masking. Found by smatch. Signed-off-by:
-
Sagi Grimberg authored
[ Upstream commit 90140624 ] If the controller is going away, we need to unquiesce the IO queues so that all pending request can fail gracefully before moving forward with controller deletion. Do that before we destroy the IO queues so blk_cleanup_queue won't block in freeze. Signed-off-by:
Sagi Grimberg <sagi@grimberg.me> Signed-off-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
-
Sandipan Das authored
[ Upstream commit c715fcfd ] For powerpc64, redundant entries in the callchain are filtered out by determining the state of the return address and the stack frame using DWARF debug information. For making these filtering decisions we must analyze the debug information for the location corresponding to the program counter value, i.e. the first entry in the callchain, and not the LR value; otherwise, perf may filter out either the second or the third entry in the callchain incorrectly. This can be observed on a powerpc64le system running Fedora 27 as shown below. Case 1 - Attaching a probe at inet_pton+0x8 (binary offset 0x15af28). Return address is still in LR and a new stack frame is not yet allocated. The LR value, i.e. the second entry, should not be filtered out. # objdump -d /usr/lib64/libc-2.26.so | less ... 000000000010eb10 <gaih_inet.constprop.7>: ... 10fa48: 78 bb e4 7e mr r4,r23 10fa4c: 0a 00 60 38 li r3,10 10fa50: d9 b4 04 48 bl 15af28 <inet_pton+0x8> 10fa54: 00 00 00 60 nop 10fa58: ac f4 ff 4b b 10ef04 <gaih_inet.constprop.7+0x3f4> ... 0000000000110450 <getaddrinfo>: ... 1105a8: 54 00 ff 38 addi r7,r31,84 1105ac: 58 00 df 38 addi r6,r31,88 1105b0: 69 e5 ff 4b bl 10eb18 <gaih_inet.constprop.7+0x8> 1105b4: 78 1b 71 7c mr r17,r3 1105b8: 50 01 7f e8 ld r3,336(r31) ... 000000000015af20 <inet_pton>: 15af20: 0b 00 4c 3c addis r2,r12,11 15af24: e0 c1 42 38 addi r2,r2,-15904 15af28: a6 02 08 7c mflr r0 15af2c: f0 ff c1 fb std r30,-16(r1) 15af30: f8 ff e1 fb std r31,-8(r1) ... # perf probe -x /usr/lib64/libc-2.26.so -a inet_pton+0x8 # perf record -e probe_libc:inet_pton -g ping -6 -c 1 ::1 # perf script Before: ping 4507 [002] 514985.546540: probe_libc:inet_pton: (7fffa7dbaf28) 7fffa7dbaf28 __GI___inet_pton+0x8 (/usr/lib64/libc-2.26.so) 7fffa7d705b4 getaddrinfo+0x164 (/usr/lib64/libc-2.26.so) 13fb52d70 _init+0xbfc (/usr/bin/ping) 7fffa7c836a0 generic_start_main.isra.0+0x140 (/usr/lib64/libc-2.26.so) 7fffa7c83898 __libc_start_main+0xb8 (/usr/lib64/libc-2.26.so) 0 [unknown] ([unknown]) After: ping 4507 [002] 514985.546540: probe_libc:inet_pton: (7fffa7dbaf28) 7fffa7dbaf28 __GI___inet_pton+0x8 (/usr/lib64/libc-2.26.so) 7fffa7d6fa54 gaih_inet.constprop.7+0xf44 (/usr/lib64/libc-2.26.so) 7fffa7d705b4 getaddrinfo+0x164 (/usr/lib64/libc-2.26.so) 13fb52d70 _init+0xbfc (/usr/bin/ping) 7fffa7c836a0 generic_start_main.isra.0+0x140 (/usr/lib64/libc-2.26.so) 7fffa7c83898 __libc_start_main+0xb8 (/usr/lib64/libc-2.26.so) 0 [unknown] ([unknown]) Case 2 - Attaching a probe at _int_malloc+0x180 (binary offset 0x9cf10). Return address in still in LR and a new stack frame has already been allocated but not used. The caller's caller, i.e. the third entry, is invalid and should be filtered out and not the second one. # objdump -d /usr/lib64/libc-2.26.so | less ... 000000000009cd90 <_int_malloc>: 9cd90: 17 00 4c 3c addis r2,r12,23 9cd94: 70 a3 42 38 addi r2,r2,-23696 9cd98: 26 00 80 7d mfcr r12 9cd9c: f8 ff e1 fb std r31,-8(r1) 9cda0: 17 00 e4 3b addi r31,r4,23 9cda4: d8 ff 61 fb std r27,-40(r1) 9cda8: 78 23 9b 7c mr r27,r4 9cdac: 1f 00 bf 2b cmpldi cr7,r31,31 9cdb0: f0 ff c1 fb std r30,-16(r1) 9cdb4: b0 ff c1 fa std r22,-80(r1) 9cdb8: 78 1b 7e 7c mr r30,r3 9cdbc: 08 00 81 91 stw r12,8(r1) 9cdc0: 11 ff 21 f8 stdu r1,-240(r1) 9cdc4: 4c 01 9d 41 bgt cr7,9cf10 <_int_malloc+0x180> 9cdc8: 20 00 a4 2b cmpldi cr7,r4,32 ... 9cf08: 00 00 00 60 nop 9cf0c: 00 00 42 60 ori r2,r2,0 9cf10: e4 06 ff 7b rldicr r31,r31,0,59 9cf14: 40 f8 a4 7f cmpld cr7,r4,r31 9cf18: 68 05 9d 41 bgt cr7,9d480 <_int_malloc+0x6f0> ... 000000000009e3c0 <tcache_init.part.4>: ... 9e420: 40 02 80 38 li r4,576 9e424: 78 fb e3 7f mr r3,r31 9e428: 71 e9 ff 4b bl 9cd98 <_int_malloc+0x8> 9e42c: 00 00 a3 2f cmpdi cr7,r3,0 9e430: 78 1b 7e 7c mr r30,r3 ... 000000000009f7a0 <__libc_malloc>: ... 9f8f8: 00 00 89 2f cmpwi cr7,r9,0 9f8fc: 1c ff 9e 40 bne cr7,9f818 <__libc_malloc+0x78> 9f900: c9 ea ff 4b bl 9e3c8 <tcache_init.part.4+0x8> 9f904: 00 00 00 60 nop 9f908: e8 90 22 e9 ld r9,-28440(r2) ... # perf probe -x /usr/lib64/libc-2.26.so -a _int_malloc+0x180 # perf record -e probe_libc:_int_malloc -g ./test-malloc # perf script Before: test-malloc 6554 [009] 515975.797403: probe_libc:_int_malloc: (7fffa6e6cf10) 7fffa6e6cf10 _int_malloc+0x180 (/usr/lib64/libc-2.26.so) 7fffa6dd0000 [unknown] (/usr/lib64/libc-2.26.so) 7fffa6e6f904 malloc+0x164 (/usr/lib64/libc-2.26.so) 7fffa6e6f9fc malloc+0x25c (/usr/lib64/libc-2.26.so) 100006b4 main+0x38 (/home/testuser/test-malloc) 7fffa6df36a0 generic_start_main.isra.0+0x140 (/usr/lib64/libc-2.26.so) 7fffa6df3898 __libc_start_main+0xb8 (/usr/lib64/libc-2.26.so) 0 [unknown] ([unknown]) After: test-malloc 6554 [009] 515975.797403: probe_libc:_int_malloc: (7fffa6e6cf10) 7fffa6e6cf10 _int_malloc+0x180 (/usr/lib64/libc-2.26.so) 7fffa6e6e42c tcache_init.part.4+0x6c (/usr/lib64/libc-2.26.so) 7fffa6e6f904 malloc+0x164 (/usr/lib64/libc-2.26.so) 7fffa6e6f9fc malloc+0x25c (/usr/lib64/libc-2.26.so) 100006b4 main+0x38 (/home/sandipan/test-malloc) 7fffa6df36a0 generic_start_main.isra.0+0x140 (/usr/lib64/libc-2.26.so) 7fffa6df3898 __libc_start_main+0xb8 (/usr/lib64/libc-2.26.so) 0 [unknown] ([unknown]) Signed-off-by:
Sandipan Das <sandipan@linux.ibm.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Maynard Johnson <maynard@us.ibm.com> Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Cc: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com> Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com> Fixes: a60335ba ("perf tools powerpc: Adjust callchain based on DWARF debug info") Link: http://lkml.kernel.org/r/24bb726d91ed173aebc972ec3f41a2ef2249434e.1530724939.git.sandipan@linux.ibm.comSigned-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by:
-
Krzysztof Kozlowski authored
[ Upstream commit cd480691 ] For most of Exynos SoCs, Power Management Unit (PMU) address space is mapped into global variable 'pmu_base_addr' very early when initializing PMU interrupt controller. A lot of other machine code depends on it so when doing iounmap() on this address, clear the global as well to avoid usage of invalid value (pointing to unmapped memory region). Properly mapped PMU address space is a requirement for all other machine code so this fix is purely theoretical. Boot will fail immediately in many other places after following this error path. Signed-off-by:
Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by:
-
Fredrik Noring authored
[ Upstream commit 1ba0a59c ] I discovered the problem when developing a frame buffer driver for the PlayStation 2 (not yet merged), using the following video modes for the PlayStation 3 in drivers/video/fbdev/ps3fb.c: }, { /* 1080if */ "1080if", 50, 1920, 1080, 13468, 148, 484, 36, 4, 88, 5, FB_SYNC_BROADCAST, FB_VMODE_INTERLACED }, { /* 1080pf */ "1080pf", 50, 1920, 1080, 6734, 148, 484, 36, 4, 88, 5, FB_SYNC_BROADCAST, FB_VMODE_NONINTERLACED }, In ps3fb_probe, the mode_option module parameter is used with fb_find_mode but it can only select the interlaced variant of 1920x1080 since the loop matching the modes does not take the difference between interlaced and progressive modes into account. In short, without the patch, progressive 1920x1080 cannot be chosen as a mode_option parameter since fb_find_mode (falsely) thinks interlace is a perfect match. Signed-off-by:
Fredrik Noring <noring@nocrew.org> Cc: "Maciej W. Rozycki" <macro@linux-mips.org> [b.zolnierkie: updated patch description] Signed-off-by:
Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by:
-
Daniel Mack authored
[ Upstream commit b951d80a ] When parsing the video modes from DT properties, make sure to zero out memory before using it. This is important because not all fields in the mode struct are explicitly initialized, even though they are used later on. Fixes: 420a4882 ("video: fbdev: pxafb: initial devicetree conversion") Reviewed-by:
Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by:
Daniel Mack <daniel@zonque.org> Signed-off-by:
-
Sandipan Das authored
[ Upstream commit 9068533e ] For powerpc64, perf will filter out the second entry in the callchain, i.e. the LR value, if the return address of the function corresponding to the probed location has already been saved on its caller's stack. The state of the return address is determined using debug information. At any point within a function, if the return address is already saved somewhere, a DWARF expression can tell us about its location. If the return address in still in LR only, no DWARF expression would exist. Typically, the instructions in a function's prologue first copy the LR value to R0 and then pushes R0 on to the stack. If LR has already been copied to R0 but R0 is yet to be pushed to the stack, we can still get a DWARF expression that says that the return address is in R0. This is indicating that getting a DWARF expression for the return address does not guarantee the fact that it has already been saved on the stack. This can be observed on a powerpc64le system running Fedora 27 as shown below. # objdump -d /usr/lib64/libc-2.26.so | less ... 000000000015af20 <inet_pton>: 15af20: 0b 00 4c 3c addis r2,r12,11 15af24: e0 c1 42 38 addi r2,r2,-15904 15af28: a6 02 08 7c mflr r0 15af2c: f0 ff c1 fb std r30,-16(r1) 15af30: f8 ff e1 fb std r31,-8(r1) 15af34: 78 1b 7f 7c mr r31,r3 15af38: 78 23 83 7c mr r3,r4 15af3c: 78 2b be 7c mr r30,r5 15af40: 10 00 01 f8 std r0,16(r1) 15af44: c1 ff 21 f8 stdu r1,-64(r1) 15af48: 28 00 81 f8 std r4,40(r1) ... # readelf --debug-dump=frames-interp /usr/lib64/libc-2.26.so | less ... 00027024 0000000000000024 00027028 FDE cie=00000000 pc=000000000015af20..000000000015af88 LOC CFA r30 r31 ra 000000000015af20 r1+0 u u u 000000000015af34 r1+0 c-16 c-8 r0 000000000015af48 r1+64 c-16 c-8 c+16 000000000015af5c r1+0 c-16 c-8 c+16 000000000015af78 r1+0 u u ... # perf probe -x /usr/lib64/libc-2.26.so -a inet_pton+0x18 # perf record -e probe_libc:inet_pton -g ping -6 -c 1 ::1 # perf script Before: ping 2829 [005] 512917.460174: probe_libc:inet_pton: (7fff7e2baf38) 7fff7e2baf38 __GI___inet_pton+0x18 (/usr/lib64/libc-2.26.so) 7fff7e2705b4 getaddrinfo+0x164 (/usr/lib64/libc-2.26.so) 12f152d70 _init+0xbfc (/usr/bin/ping) 7fff7e1836a0 generic_start_main.isra.0+0x140 (/usr/lib64/libc-2.26.so) 7fff7e183898 __libc_start_main+0xb8 (/usr/lib64/libc-2.26.so) 0 [unknown] ([unknown]) After: ping 2829 [005] 512917.460174: probe_libc:inet_pton: (7fff7e2baf38) 7fff7e2baf38 __GI___inet_pton+0x18 (/usr/lib64/libc-2.26.so) 7fff7e26fa54 gaih_inet.constprop.7+0xf44 (/usr/lib64/libc-2.26.so) 7fff7e2705b4 getaddrinfo+0x164 (/usr/lib64/libc-2.26.so) 12f152d70 _init+0xbfc (/usr/bin/ping) 7fff7e1836a0 generic_start_main.isra.0+0x140 (/usr/lib64/libc-2.26.so) 7fff7e183898 __libc_start_main+0xb8 (/usr/lib64/libc-2.26.so) 0 [unknown] ([unknown]) Reported-by:
Ravi Bangoria <ravi.bangoria@linux.ibm.com> Signed-off-by:
-
Randy Dunlap authored
[ Upstream commit b6566b47 ] Fix a build warning in viafbdev.c when CONFIG_PROC_FS is not enabled by marking the unused function as __maybe_unused. ../drivers/video/fbdev/via/viafbdev.c:1471:12: warning: 'viafb_sup_odev_proc_show' defined but not used [-Wunused-function] Signed-off-by:
-
Anton Vasilyev authored
[ Upstream commit 5958fde7 ] goldfish_fb_probe() allocates memory for fb, but goldfish_fb_remove() does not have deallocation of fb, which leads to memory leak on probe/remove. The patch adds deallocation into goldfish_fb_remove(). Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by:
Anton Vasilyev <vasilyev@ispras.ru> Cc: Aleksandar Markovic <aleksandar.markovic@mips.com> Cc: Miodrag Dinic <miodrag.dinic@mips.com> Cc: Goran Ferenc <goran.ferenc@mips.com> Signed-off-by:
-
Jiri Olsa authored
[ Upstream commit 46b3722c ] We occasionaly hit following assert failure in 'perf top', when processing the /proc info in multiple threads. perf: ...include/linux/refcount.h:109: refcount_inc: Assertion `!(!refcount_inc_not_zero(r))' failed. The gdb backtrace looks like this: [Switching to Thread 0x7ffff11ba700 (LWP 13749)] 0x00007ffff50839fb in raise () from /lib64/libc.so.6 (gdb) #0 0x00007ffff50839fb in raise () from /lib64/libc.so.6 #1 0x00007ffff5085800 in abort () from /lib64/libc.so.6 #2 0x00007ffff507c0da in __assert_fail_base () from /lib64/libc.so.6 #3 0x00007ffff507c152 in __assert_fail () from /lib64/libc.so.6 #4 0x0000000000535373 in refcount_inc (r=0x7fffdc009be0) at ...include/linux/refcount.h:109 #5 0x00000000005354f1 in comm_str__get (cs=0x7fffdc009bc0) at util/comm.c:24 #6 0x00000000005356bd in __comm_str__findnew (str=0x7fffd000b260 ":2", root=0xbed5c0 <comm_str_root>) at util/comm.c:72 #7 0x000000000053579e in comm_str__findnew (str=0x7fffd000b260 ":2", root=0xbed5c0 <comm_str_root>) at util/comm.c:95 #8 0x000000000053582e in comm__new (str=0x7fffd000b260 ":2", timestamp=0, exec=false) at util/comm.c:111 #9 0x00000000005363bc in thread__new (pid=2, tid=2) at util/thread.c:57 #10 0x0000000000523da0 in ____machine__findnew_thread (machine=0xbfde38, threads=0xbfdf28, pid=2, tid=2, create=true) at util/machine.c:457 #11 0x0000000000523eb4 in __machine__findnew_thread (machine=0xbfde38, ... The failing assertion is this one: REFCOUNT_WARN(!refcount_inc_not_zero(r), ... The problem is that we keep global comm_str_root list, which is accessed by multiple threads during the 'perf top' startup and following 2 paths can race: thread 1: ... thread__new comm__new comm_str__findnew down_write(&comm_str_lock); __comm_str__findnew comm_str__get thread 2: ... comm__override or comm__free comm_str__put refcount_dec_and_test down_write(&comm_str_lock); rb_erase(&cs->rb_node, &comm_str_root); Because thread 2 first decrements the refcnt and only after then it removes the struct comm_str from the list, the thread 1 can find this object on the list with refcnt equls to 0 and hit the assert. This patch fixes the thread 1 __comm_str__findnew path, by ignoring objects that already dropped the refcnt to 0. For the rest of the objects we take the refcnt before comparing its name and release it afterwards with comm_str__put, which can also release the object completely. Signed-off-by:
Jiri Olsa <jolsa@kernel.org> Acked-by:
Namhyung Kim <namhyung@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Lukasz Odzioba <lukasz.odzioba@intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Wang Nan <wangnan0@huawei.com> Cc: kernel-team@lge.com Link: http://lkml.kernel.org/r/20180720101740.GA27176@kravaSigned-off-by:
-
Dan Carpenter authored
[ Upstream commit 5ec1ec35 ] The omapfb_register_client[] array has OMAPFB_PLANE_NUM elements so the > should be >= or we are one element beyond the end of the array. Fixes: 8b08cf2b ("OMAP: add TI OMAP framebuffer driver") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Cc: Imre Deak <imre.deak@solidboot.com> Signed-off-by:
-
Jiri Olsa authored
[ Upstream commit e8fedff1 ] Stephan reported, that pipe mode does not carry the group information and thus the piped report won't display the grouped output for following command: # perf record -e '{cycles,instructions,branches}' -a sleep 4 | perf report It has no idea about the group setup, so it will display events separately: # Overhead Command Shared Object ... # ........ ............... ....................... # 6.71% swapper [kernel.kallsyms] 2.28% offlineimap libpython2.7.so.1.0 0.78% perf [kernel.kallsyms] ... Fix GROUP_DESC feature record to be synthesized in pipe mode, so the report output is grouped if there are groups defined in record: # Overhead Command Shared ... # ........................ ............... ....... # 7.57% 0.16% 0.30% swapper [kernel 1.87% 3.15% 2.46% offlineimap libpyth 1.33% 0.00% 0.00% perf [kernel ... Reported-by:
Stephane Eranian <eranian@google.com> Signed-off-by:
-
Bob Peterson authored
[ Upstream commit e79e0e14 ] Before this patch, you could get into situations like this: 1. Process 1 searches for X free blocks, finds them, makes a reservation 2. Process 2 searches for free blocks in the same rgrp, but now the bitmap is full because process 1's reservation is skipped over. So it marks the bitmap as GBF_FULL. 3. Process 1 tries to allocate blocks from its own reservation, but since the GBF_FULL bit is set, it skips over the rgrp and searches elsewhere, thus not using its own reservation. This patch adds an additional check to allow processes to use their own reservations. Signed-off-by:
Bob Peterson <rpeterso@redhat.com> Signed-off-by:
Andreas Gruenbacher <agruenba@redhat.com> Signed-off-by:
-
