- 26 Aug, 2021 33 commits
-
-
Leonardo Bras authored
Update remove_dma_window() so it can be used to remove DDW with a given property name. This enables the creation of new property names for DDW, so we can have different usage for it, like indirect mapping. Also, add return values to it so we can check if the property was found while removing the active DDW. This allows skipping the remaining property names while reducing the impact of multiple property names. Signed-off-by:
Leonardo Bras <leobras.c@gmail.com> Reviewed-by:
Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20210817063929.38701-9-leobras.c@gmail.com
-
Leonardo Bras authored
Add a new helper _iommu_table_setparms(), and use it in iommu_table_setparms() and iommu_table_setparms_lpar() to avoid duplicated code. Also, setting tbl->it_ops was happening outsite iommu_table_setparms*(), so move it to the new helper. Since we need the iommu_table_ops to be declared before used, declare iommu_table_lpar_multi_ops and iommu_table_pseries_ops to before their respective iommu_table_setparms*(). Signed-off-by:
Frederic Barrat <fbarrat@linux.ibm.com> Signed-off-by:
-
Leonardo Bras authored
Code used to create a ddw property that was previously scattered in enable_ddw() is now gathered in ddw_property_create(), which deals with allocation and filling the property, letting it ready for of_property_add(), which now occurs in sequence. This created an opportunity to reorganize the second part of enable_ddw(): Without this patch enable_ddw() does, in order: kzalloc() property & members, create_ddw(), fill ddwprop inside property, ddw_list_new_entry(), do tce_setrange_multi_pSeriesLP_walk in all memory, of_add_property(), and list_add(). With this patch enable_ddw() does, in order: create_ddw(), ddw_property_create(), of_add_property(), ddw_list_new_entry(), do tce_setrange_multi_pSeriesLP_walk in all memory, and list_add(). This change requires of_remove_property() in case anything fails after of_add_property(), but we get to do tce_setrange_multi_pSeriesLP_walk in all memory, which looks the most expensive operation, only if everything else succeeds. Also, the error path got remove_ddw() replaced by a new helper __remove_dma_window(), which only removes the new DDW with an rtas-call. For this, a new helper clean_dma_window() was needed to clean anything that could left if walk_system_ram_range() fails. Signed-off-by:
-
Leonardo Bras authored
enable_ddw() currently returns the address of the DMA window, which is considered invalid if has the value 0x00. Also, it only considers valid an address returned from find_existing_ddw if it's not 0x00. Changing this behavior makes sense, given the users of enable_ddw() only need to know if direct mapping is possible. It can also allow a DMA window starting at 0x00 to be used. This will be helpful for using a DDW with indirect mapping, as the window address will be different than 0x00, but it will not map the whole partition. Signed-off-by:
-
Leonardo Bras authored
There are two functions creating direct_window_list entries in a similar way, so create a ddw_list_new_entry() to avoid duplicity and simplify those functions. Signed-off-by:
-
Leonardo Bras authored
Creates a helper to allow allocating a new iommu_table without the need to reallocate the iommu_group. This will be helpful for replacing the iommu_table for the new DMA window, after we remove the old one with iommu_tce_table_put(). Signed-off-by:
-
Leonardo Bras authored
Having a function to check if the iommu table has any allocation helps deciding if a tbl can be reset for using a new DMA window. It should be enough to replace all instances of !bitmap_empty(tbl...). iommu_table_in_use() skips reserved memory, so we don't need to worry about releasing it before testing. This causes iommu_table_release_pages() to become unnecessary, given it is only used to remove reserved memory for testing. Also, only allow storing reserved memory values in tbl if they are valid in the table, so there is no need to check it in the new helper. Signed-off-by:
-
Leonardo Bras authored
Some functions assume IOMMU page size can only be 4K (pageshift == 12). Update them to accept any page size passed, so we can use 64K pages. In the process, some defines like TCE_SHIFT were made obsolete, and then removed. IODA3 Revision 3.0_prd1 (OpenPowerFoundation), Figures 3.4 and 3.5 show a RPN of 52-bit, and considers a 12-bit pageshift, so there should be no need of using TCE_RPN_MASK, which masks out any bit after 40 in rpn. It's usage removed from tce_build_pSeries(), tce_build_pSeriesLP(), and tce_buildmulti_pSeriesLP(). Most places had a tbl struct, so using tbl->it_page_shift was simple. tce_free_pSeriesLP() was a special case, since callers not always have a tbl struct, so adding a tceshift parameter seems the right thing to do. Signed-off-by:
-
Srikar Dronamraju authored
cpu_cpu_map holds all the CPUs in the DIE. However in PowerPC, when onlining/offlining of CPUs, this mask doesn't get updated. This mask is however updated when CPUs are added/removed. So when both operations like online/offline of CPUs and adding/removing of CPUs are done simultaneously, then cpumaps end up broken. WARNING: CPU: 13 PID: 1142 at kernel/sched/topology.c:898 build_sched_domains+0xd48/0x1720 Modules linked in: rpadlpar_io rpaphp mptcp_diag xsk_diag tcp_diag udp_diag raw_diag inet_diag unix_diag af_packet_diag netlink_diag bonding tls nft_fib_inet nft_fib_ipv4 nft_fib_ipv6 nft_fib nft_reject_inet nf_reject_ipv4 nf_reject_ipv6 nft_reject nft_ct nft_chain_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 ip_set rfkill nf_tables nfnetlink pseries_rng xts vmx_crypto uio_pdrv_genirq uio binfmt_misc ip_tables xfs libcrc32c dm_service_time sd_mod t10_pi sg ibmvfc scsi_transport_fc ibmveth dm_multipath dm_mirror dm_region_hash dm_log dm_mod fuse CPU: 13 PID: 1142 Comm: kworker/13:2 Not tainted 5.13.0-rc6+ #28 Workqueue: events cpuset_hotplug_workfn NIP: c0000000001caac8 LR: c0000000001caac4 CTR: 00000000007088ec REGS: c00000005596f220 TRAP: 0700 Not tainted (5.13.0-rc6+) MSR: 8000000000029033 <SF,EE,ME,IR,DR,RI,LE> CR: 48828222 XER: 00000009 CFAR: c0000000001ea698 IRQMASK: 0 GPR00: c0000000001caac4 c00000005596f4c0 c000000001c4a400 0000000000000036 GPR04: 00000000fffdffff c00000005596f1d0 0000000000000027 c0000018cfd07f90 GPR08: 0000000000000023 0000000000000001 0000000000000027 c0000018fe68ffe8 GPR12: 0000000000008000 c00000001e9d1880 c00000013a047200 0000000000000800 GPR16: c000000001d3c7d0 0000000000000240 0000000000000048 c000000010aacd18 GPR20: 0000000000000001 c000000010aacc18 c00000013a047c00 c000000139ec2400 GPR24: 0000000000000280 c000000139ec2520 c000000136c1b400 c000000001c93060 GPR28: c00000013a047c20 c000000001d3c6c0 c000000001c978a0 000000000000000d NIP [c0000000001caac8] build_sched_domains+0xd48/0x1720 LR [c0000000001caac4] build_sched_domains+0xd44/0x1720 Call Trace: [c00000005596f4c0] [c0000000001caac4] build_sched_domains+0xd44/0x1720 (unreliable) [c00000005596f670] [c0000000001cc5ec] partition_sched_domains_locked+0x3ac/0x4b0 [c00000005596f710] [c0000000002804e4] rebuild_sched_domains_locked+0x404/0x9e0 [c00000005596f810] [c000000000283e60] rebuild_sched_domains+0x40/0x70 [c00000005596f840] [c000000000284124] cpuset_hotplug_workfn+0x294/0xf10 [c00000005596fc60] [c000000000175040] process_one_work+0x290/0x590 [c00000005596fd00] [c0000000001753c8] worker_thread+0x88/0x620 [c00000005596fda0] [c000000000181704] kthread+0x194/0x1a0 [c00000005596fe10] [c00000000000ccec] ret_from_kernel_thread+0x5c/0x70 Instruction dump: 485af049 60000000 2fa30800 409e0028 80fe0000 e89a00f8 e86100e8 38da0120 7f88e378 7ce53b78 4801fb91 60000000 <0fe00000> 39000000 38e00000 38c00000 Fix this by updating cpu_cpu_map aka cpumask_of_node() on every CPU online/offline. Signed-off-by:
Srikar Dronamraju <srikar@linux.vnet.ibm.com> Signed-off-by:
-
Srikar Dronamraju authored
Currently, a debug message gets printed every time an attempt to add(remove) a CPU. However this is redundant if the CPU is already added (removed) from the node. Signed-off-by:
-
Srikar Dronamraju authored
Convert the remaining printk to pr_xxx One advantage would be all prints will now have prefix "numa:" from pr_fmt(). [ convert printk(KERN_ERR) to pr_warn : Suggested by Laurent Dufour ] Suggested-by:
-
Srikar Dronamraju authored
powerpc supported numa=debug which is not documented. This option was used to print early debug output. However something more flexible can be achieved by using CONFIG_DYNAMIC_DEBUG. Hence drop dbg (and numa=debug) in favour of pr_debug Suggested-by:
-
Srikar Dronamraju authored
Currently CACHE domain is not enabled on shared processor mode PowerVM LPARS. On PowerVM systems, 'ibm,thread-group' device-tree property 2 under cpu-device-node indicates which all CPUs share L2-cache. However 'ibm,thread-group' device-tree property 2 is a relatively new property. In absence of 'ibm,thread-group' property 2, 'l2-cache' device property under cpu-device-node could help system to identify CPUs sharing L2-cache. However this property is not exposed by PhyP in shared processor mode configurations. In absence of properties that inform OS about which CPUs share L2-cache, fallback on core boundary. Here are some stats from Power9 shared LPAR with the changes. $ lscpu Architecture: ppc64le Byte Order: Little Endian CPU(s): 32 On-line CPU(s) list: 0-31 Thread(s) per core: 8 Core(s) per socket: 1 Socket(s): 3 NUMA node(s): 2 Model: 2.2 (pvr 004e 0202) Model name: POWER9 (architected), altivec supported Hypervisor vendor: pHyp Virtualization type: para L1d cache: 32K L1i cache: 32K NUMA node0 CPU(s): 16-23 NUMA node1 CPU(s): 0-15,24-31 Physical sockets: 2 Physical chips: 1 Physical cores/chip: 10 Before patch $ grep -r . /sys/kernel/debug/sched/domains/cpu0/domain*/name Before /sys/kernel/debug/sched/domains/cpu0/domain0/name:SMT /sys/kernel/debug/sched/domains/cpu0/domain1/name:DIE /sys/kernel/debug/sched/domains/cpu0/domain2/name:NUMA After /sys/kernel/debug/sched/domains/cpu0/domain0/name:SMT /sys/kernel/debug/sched/domains/cpu0/domain1/name:CACHE /sys/kernel/debug/sched/domains/cpu0/domain2/name:DIE /sys/kernel/debug/sched/domains/cpu0/domain3/name:NUMA $ awk '/domain/{print $1, $2}' /proc/schedstat | sort -u | sed -e 's/00000000,//g' Before domain0 00000055 domain0 000000aa domain0 00005500 domain0 0000aa00 domain0 00550000 domain0 00aa0000 domain0 55000000 domain0 aa000000 domain1 00ff0000 domain1 ff00ffff domain2 ffffffff After domain0 00000055 domain0 000000aa domain0 00005500 domain0 0000aa00 domain0 00550000 domain0 00aa0000 domain0 55000000 domain0 aa000000 domain1 000000ff domain1 0000ff00 domain1 00ff0000 domain1 ff000000 domain2 ff00ffff domain2 ffffffff domain3 ffffffff (Lower is better) perf stat -a -r 5 -n perf bench sched pipe | tail -n 2 Before 153.798 +- 0.142 seconds time elapsed ( +- 0.09% ) After 111.545 +- 0.652 seconds time elapsed ( +- 0.58% ) which is an improvement of 27.47% Signed-off-by:Gautham R. Shenoy <ego@linux.vnet.ibm.com> Signed-off-by:
-
Srikar Dronamraju authored
lscpu() uses core_siblings to list the number of sockets in the system. core_siblings is set using topology_core_cpumask. While optimizing the powerpc bootup path, Commit 4ca234a9 ("powerpc/smp: Stop updating cpu_core_mask"). it was found that updating cpu_core_mask() ended up taking a lot of time. It was thought that on Powerpc, cpu_core_mask() would always be same as cpu_cpu_mask() i.e number of sockets will always be equal to number of nodes. As an optimization, cpu_core_mask() was made a snapshot of cpu_cpu_mask(). However that was found to be false with PowerPc KVM guests, where each node could have more than one socket. So with Commit c47f892d ("powerpc/smp: Reintroduce cpu_core_mask"), cpu_core_mask was updated based on chip_id but in an optimized way using some mask manipulations and chip_id caching. However on non-PowerNV and non-pseries KVM guests (i.e not implementing cpu_to_chip_id(), continued to use a copy of cpu_cpu_mask(). There are two issues that were noticed on such systems 1. lscpu would report one extra socket. On a IBM,9009-42A (aka zz system) which has only 2 chips/ sockets/ nodes, lscpu would report Architecture: ppc64le Byte Order: Little Endian CPU(s): 160 On-line CPU(s) list: 0-159 Thread(s) per core: 8 Core(s) per socket: 6 Socket(s): 3 <-------------- NUMA node(s): 2 Model: 2.2 (pvr 004e 0202) Model name: POWER9 (architected), altivec supported Hypervisor vendor: pHyp Virtualization type: para L1d cache: 32K L1i cache: 32K L2 cache: 512K L3 cache: 10240K NUMA node0 CPU(s): 0-79 NUMA node1 CPU(s): 80-159 2. Currently cpu_cpu_mask is updated when a core is added/removed. However its not updated when smt mode switching or on CPUs are explicitly offlined. However all other percpu masks are updated to ensure only active/online CPUs are in the masks. This results in build_sched_domain traces since there will be CPUs in cpu_cpu_mask() but those CPUs are not present in SMT / CACHE / MC / NUMA domains. A loop of threads running smt mode switching and core add/remove will soon show this trace. Hence cpu_cpu_mask has to be update at smt mode switch. This will have impact on cpu_core_mask(). cpu_core_mask() is a snapshot of cpu_cpu_mask. Different CPUs within the same socket will end up having different cpu_core_masks since they are snapshots at different points of time. This means when lscpu will start reporting many more sockets than the actual number of sockets/ nodes / chips. Different ways to handle this problem: A. Update the snapshot aka cpu_core_mask for all CPUs whenever cpu_cpu_mask is updated. This would a non-optimal solution. B. Instead of a cpumask_var_t, make cpu_core_map a cpumask pointer pointing to cpu_cpu_mask. However percpu cpumask pointer is frowned upon and we need a clean way to handle PowerPc KVM guest which is not a snapshot. C. Update cpu_core_masks all PowerPc systems like in PowerPc KVM guests using mask manipulations. This approach is relatively simple and unifies with the existing code. D. On top of 3, we could also resurrect get_physical_package_id which could return a nid for the said CPU. However this is not needed at this time. Option C is the preferred approach for now. While this is somewhat a revert of Commit 4ca234a9 ("powerpc/smp: Stop updating cpu_core_mask"). 1. Plain revert has some conflicts 2. For chip_id == -1, the cpu_core_mask is made identical to cpu_cpu_mask, unlike previously where cpu_core_mask was set to a core if chip_id doesn't exist. This goes by the principle that if chip_id is not exposed, then sockets / chip / node share the same set of CPUs. With the fix, lscpu o/p would be Architecture: ppc64le Byte Order: Little Endian CPU(s): 160 On-line CPU(s) list: 0-159 Thread(s) per core: 8 Core(s) per socket: 6 Socket(s): 2 <-------------- NUMA node(s): 2 Model: 2.2 (pvr 004e 0202) Model name: POWER9 (architected), altivec supported Hypervisor vendor: pHyp Virtualization type: para L1d cache: 32K L1i cache: 32K L2 cache: 512K L3 cache: 10240K NUMA node0 CPU(s): 0-79 NUMA node1 CPU(s): 80-159 Fixes: 4ca234a9 ("powerpc/smp: Stop updating cpu_core_mask") Signed-off-by:
-
Srikar Dronamraju authored
Aneesh reported a crash with a fairly recent upstream kernel when booting kernel whose commandline was appended with nr_cpus=2 1:mon> e cpu 0x1: Vector: 300 (Data Access) at [c000000008a67bd0] pc: c00000000002557c: cpu_to_chip_id+0x3c/0x100 lr: c000000000058380: start_secondary+0x460/0xb00 sp: c000000008a67e70 msr: 8000000000001033 dar: 10 dsisr: 80000 current = 0xc00000000891bb00 paca = 0xc0000018ff981f80 irqmask: 0x03 irq_happened: 0x01 pid = 0, comm = swapper/1 Linux version 5.13.0-rc3-15704-ga050a6d2 (kvaneesh@ltc-boston8) (gcc (Ubuntu 9.3.0-17ubuntu1~20.04) 9.3.0, GNU ld (GNU Binutils for Ubuntu) 2.34) #433 SMP Tue May 25 02:38:49 CDT 2021 1:mon> t [link register ] c000000000058380 start_secondary+0x460/0xb00 [c000000008a67e70] c000000008a67eb0 (unreliable) [c000000008a67eb0] c0000000000589d4 start_secondary+0xab4/0xb00 [c000000008a67f90] c00000000000c654 start_secondary_prolog+0x10/0x14 Current code assumes that num_possible_cpus() is always greater than threads_per_core. However this may not be true when using nr_cpus=2 or similar options. Handle the case where num_possible_cpus() is not an exact multiple of threads_per_core. Fixes: c1e53367 ("powerpc/smp: Cache CPU to chip lookup") Reported-by:Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Signed-off-by:
-
Joel Stanley authored
When booting with systemd these options are required. This increases the image by about 50KB, or 2%. Signed-off-by:
Joel Stanley <joel@jms.id.au> Signed-off-by:
-
Joel Stanley authored
Liteeth is the network device used by Microwatt. Signed-off-by:
-
Joel Stanley authored
The liteeth network device is used in the Microwatt soc. Signed-off-by:
-
Christophe Leroy authored
HMT_xxx macros are macros for adjusting thread priority (hardware multi-threading) are macros inherited from PPC64 via commit 5f7c6907 ("[PATCH] powerpc: Merged ppc_asm.h") Those instructions are pointless on PPC32, but some common fonctions like arch_cpu_idle() use them. So make them empty on PPC32 to avoid those instructions. Signed-off-by:
Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by:
-
Aneesh Kumar K.V authored
Fix make htmldocs related errors with the newly added associativity.rst doc file. Reported-by:
Stephen Rothwell <sfr@canb.auug.org.au> Tested-by: Stephen Rothwell <sfr@canb.auug.org.au> # build test Signed-off-by:
-
Michael Ellerman authored
Merge the changes to retire the legacy WR sbc8548 and sbc8641 platforms from Paul. These were sent as a pull request, but I rebased them onto rc2 so as not to pull too many unrelated changes in to my next. Description from Paul's pull request follows: In v2.6.27 (2008, 917f0af9) the sbc8260 support was implicitly retired by not being carried forward through the ppc --> powerpc device tree transition. Then, in v3.6 (2012, b048b4e1) we retired the support for the sbc8560 boards. Next, in v4.18 (2017, 3bc6cf5a) we retired the support for the 2006 vintage sbc834x boards. The sbc8548 and sbc8641d boards were maybe 1-2 years newer than the sbc834x boards, but it is also 3+ years later, so it makes sense to now retire them as well - which is what is done here. These two remaining WR boards were based on the Freescale MPC8548-CDS and the MPC8641D-HPCN reference board implementations. Having had the chance to use these and many other Fsl ref boards, I know this: The Freescale reference boards were typically produced in limited quantity and primarily available to BSP developers and hardware designers, and not likely to have found a 2nd life with hobbyists and/or collectors. It was good to have that BSP code subjected to mainline review and hence also widely available back in the day. But given the above, we should probably also be giving serious consideration to retiring additional similar age/type reference board platforms as well. I've always felt it is important for us to be proactive in retiring old code, since it has a genuine non-zero carrying cost, as described in the 930d52c0 merge log. But for the here and now, we just clean up the remaining BSP code that I had added for SBC platforms. Link: https://lore.kernel.org/r/20210824174209.GB160508@windriver.com
-
Paul Gortmaker authored
Signed-off-by:
Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by:
-
Paul Gortmaker authored
The support was for this was added to mainline over 12 years ago, in v2.6.26 [4e8aae89] just around the ppc --> powerpc migration. I believe the board was introduced shortly after the sbc8548 board, making it roughly a 14 year old platform - with the CPU speed and memory size typical for that era. I haven't had one of these boards for several years, and availability was discontinued several years before that. Given that, there is no point in adding a burden to testing coverage that builds all possible defconfigs, so it makes sense to remove it. Of course it will remain in the git history forever, for anyone who happens to find a functional board and wants to tinker with it. Acked-by:
Scott Wood <oss@buserror.net> Signed-off-by:
-
Paul Gortmaker authored
The support was for this was mainlined 13 years ago, in v2.6.25 [0e0fffe8] just around the ppc --> powerpc migration. I believe the board was introduced a year or two before that, so it is roughly a 15 year old platform - with the CPU speed and memory size that was typical for that era. I haven't had one of these boards for several years, and availability was discontinued several years before that. Given that, there is no point in adding a burden to testing coverage that builds all possible defconfigs, so it makes sense to remove it. Of course it will remain in the git history forever, for anyone who happens to find a functional board and wants to tinker with it. Acked-by:
-
Michael Ellerman authored
Merge some KVM patches we are keeping in a topic branch in case there are any merge conflicts that need resolving.
-
Christophe Leroy authored
40x and BOOKE don't have MSR_RI therefore all tests involving MSR_RI may be problematic on those plateforms. Create helpers to check or set MSR_RI in regs, and use them in common code. Signed-off-by:
-
Christophe Leroy authored
In those hot functions that are called at every interrupt, any saved cycle is worth it. interrupt_exit_user_prepare() and interrupt_exit_kernel_prepare() are called from three places: - From entry_32.S - From interrupt_64.S - From interrupt_exit_user_restart() and interrupt_exit_kernel_restart() In entry_32.S, there are inambiguously called based on MSR_PR: interrupt_return: lwz r4,_MSR(r1) addi r3,r1,STACK_FRAME_OVERHEAD andi. r0,r4,MSR_PR beq .Lkernel_interrupt_return bl interrupt_exit_user_prepare ... .Lkernel_interrupt_return: bl interrupt_exit_kernel_prepare In interrupt_64.S, that's similar: interrupt_return_\srr\(): ld r4,_MSR(r1) andi. r0,r4,MSR_PR beq interrupt_return_\srr\()_kernel interrupt_return_\srr\()_user: /* make backtraces match the _kernel variant */ addi r3,r1,STACK_FRAME_OVERHEAD bl interrupt_exit_user_prepare ... interrupt_return_\srr\()_kernel: addi r3,r1,STACK_FRAME_OVERHEAD bl interrupt_exit_kernel_prepare In interrupt_exit_user_restart() and interrupt_exit_kernel_restart(), MSR_PR is verified respectively by BUG_ON(!user_mode(regs)) and BUG_ON(user_mode(regs)) prior to calling interrupt_exit_user_prepare() and interrupt_exit_kernel_prepare(). The verification in interrupt_exit_user_prepare() and interrupt_exit_kernel_prepare() are therefore useless and can be removed. Signed-off-by:
Nicholas Piggin <npiggin@gmail.com> Signed-off-by:
-
Xiongwei Song authored
Use _DEAR to get the offset of dear register in pr_regs for 64e cpus. Signed-off-by:
Xiongwei Song <sxwjean@gmail.com> Signed-off-by:
-
Xiongwei Song authored
Create an anonymous union for dar and dear regsiters, we can reference dear to get the effective address when CONFIG_4xx=y or CONFIG_BOOKE=y. Otherwise, reference dar. This makes code more clear. Signed-off-by:
-
Xiongwei Song authored
Use _ESR to get the offset of esr register in pr_regs for 64e cpus. Signed-off-by:
-
Xiongwei Song authored
Create an anonymous union for dsisr and esr regsiters, we can reference esr to get the exception detail when CONFIG_4xx=y or CONFIG_BOOKE=y. Otherwise, reference dsisr. This makes code more clear. Signed-off-by:
-
Jordan Niethe authored
Transactional Memory was removed from the architecture in ISA v3.1. For threads running in P8/P9 compatibility mode on P10 a synthetic TM implementation is provided. In this implementation, tbegin. always sets cr0 eq meaning the abort handler is always called. This is not an issue as users of TM are expected to have a fallback non transactional way to make forward progress in the abort handler. The TEXASR indicates if a transaction failure is due to a synthetic implementation. Some of the TM self tests need a non-degenerate TM implementation for their testing to be meaningful so check for a synthetic implementation and skip the test if so. Signed-off-by:
Jordan Niethe <jniethe5@gmail.com> Signed-off-by:
-
Jordan Niethe authored
ISA v3.1 removes TM but includes a synthetic implementation for backwards compatibility. With this implementation, the tests ptrace-tm-spd-gpr and ptrace-tm-gpr should never be able to make any forward progress and eventually should be killed by the timeout. Instead on a P10 running in P9 mode, ptrace_tm_gpr fails like so: test: ptrace_tm_gpr tags: git_version:unknown Starting the child ... ... GPR[27]: 1 Expected: 2 GPR[28]: 1 Expected: 2 GPR[29]: 1 Expected: 2 GPR[30]: 1 Expected: 2 GPR[31]: 1 Expected: 2 [FAIL] Test FAILED on line 98 failure: ptrace_tm_gpr selftests: ptrace-tm-gpr [FAIL] The problem is in the inline assembly of the child. r0 is loaded with a value in the child's transaction abort handler but this register is not included in the clobbers list. This means it is possible that this statement: cptr[1] = 0; which is meant to signal the parent to wait may actually use the value placed into r0 by the inline assembly incorrectly signal the parent to continue. By inspection the same problem is present in ptrace-tm-spd-gpr. Adding r0 to the clobbbers list makes the test fail correctly via a timeout on a P10 running in P8/P9 compatibility mode. Suggested-by:
Michael Neuling <mikey@neuling.org> Signed-off-by:
-
- 25 Aug, 2021 7 commits
-
-
Kajol Jain authored
Incase of random sampling, there can be scenarios where Sample Instruction Address Register(SIAR) may not latch to the sampled instruction and could result in the value of 0. In these scenarios it is preferred to return regs->nip. These corner cases are seen in the previous generation (p9) also. Patch adds the check for SIAR value along with regs_use_siar and siar_valid checks so that the function will return regs->nip incase SIAR is zero. Patch drops the code under PPMU_P10_DD1 flag check which handles SIAR 0 case only for Power10 DD1. Fixes: 2ca13a4c ("powerpc/perf: Use regs->nip when SIAR is zero") Signed-off-by:
Kajol Jain <kjain@linux.ibm.com> Signed-off-by:
-
Kajol Jain authored
Drop the case of returning 0 as instruction pointer since kernel never executes at 0 and userspace almost never does either. Fixes: e6878835 ("powerpc/perf: Sample only if SIAR-Valid bit is set in P7+") Signed-off-by:
-
Kajol Jain authored
Minor optimization in the 'perf_instruction_pointer' function code by making use of stack siar instead of mfspr. Fixes: 75382aa7 ("powerpc/perf: Move code to select SIAR or pt_regs into perf_read_regs") Signed-off-by:
Nageswara R Sastry <rnsastry@linux.ibm.com> Signed-off-by:
-
Nicholas Piggin authored
This register is not architected and not implemented in POWER9 or 10, it just reads back zeroes for compatibility. Signed-off-by:
Fabiano Rosas <farosas@linux.ibm.com> Link: https://lore.kernel.org/r/20210811160134.904987-11-npiggin@gmail.com
-
Nicholas Piggin authored
After the L1 saves its PMU SPRs but before loading the L2's PMU SPRs, switch the pmcregs_in_use field in the L1 lppaca to the value advertised by the L2 in its VPA. On the way out of the L2, set it back after saving the L2 PMU registers (if they were in-use). This transfers the PMU liveness indication between the L1 and L2 at the points where the registers are not live. This fixes the nested HV bug for which a workaround was added to the L0 HV by commit 63279eeb ("KVM: PPC: Book3S HV: Always save guest pmu for guest capable of nesting"), which explains the problem in detail. That workaround is no longer required for guests that include this bug fix. Fixes: 360cae31 ("KVM: PPC: Book3S HV: Nested guest entry via hypercall") Signed-off-by:
-
Fabiano Rosas authored
vcpu is already anargument so vcpu->arch.trap can be used directly. Signed-off-by:
-
Fabiano Rosas authored
If the nested hypervisor has no access to a facility because it has been disabled by the host, it should also not be able to see the Hypervisor Facility Unavailable that arises from one of its guests trying to access the facility. This patch turns a HFU that happened in L2 into a Hypervisor Emulation Assistance interrupt and forwards it to L1 for handling. The ones that happened because L1 explicitly disabled the facility for L2 are still let through, along with the corresponding Cause bits in the HFSCR. Signed-off-by:
-
